Use of surface plasmon resonance to probe the equilibrium and dynamic aspects of interactions between biological macromolecules

Analysis of high affinity self-association by fluorescence optical sedimentation velocity analytical ultracentrifugation of labeled proteins: opportunities and limitations

Sedimentation velocity analytical ultracentrifugation (SV) is a powerful first-principle technique for the study of protein interactions, and allows a rigorous characterization of binding stoichiometry and affinities. A recently introduced commercial fluorescence optical detection system (FDS) permits analysis of high-affinity interactions by SV. However, for most proteins the attachment of an extrinsic fluorophore is an essential prerequisite for analysis by FDS-SV. Using the glutamate receptor GluA2 amino terminal domain as a model system for high-affinity homo-dimerization, we demonstrate how the experimental design and choice of fluorescent label can impact both the observed binding constants as well as the derived hydrodynamic parameter estimates for the monomer and dimer species. Specifically, FAM (5,6-carboxyfluorescein) was found to create different populations of artificially high-affinity and low-affinity dimers, as indicated by both FDS-SV and the kinetics of dimer dissociation studied using a bench-top fluorescence spectrometer and Förster Resonance Energy Transfer. By contrast, Dylight488 labeled GluA2, as well as GluA2 expressed as an EGFP fusion protein, yielded results consistent with estimates for unlabeled GluA2. Our study suggests considerations for the choice of labeling strategies, and highlights experimental designs that exploit specific opportunities of FDS-SV for improving the reliability of the binding isotherm analysis of interacting systems.

Quantitative real-time imaging of protein-protein interactions by LSPR detection with micropatterned gold nanoparticles

Localized surface plasmon resonance (LSPR) offers powerful means for sensitive label-free detection of protein-protein interactions in a highly multiplexed format. We have here established self-assembly and surface modification of plasmonic nanostructures on solid support suitable for quantitative protein-protein interaction analysis by spectroscopic and microscopic LSPR detection. These architectures were obtained by layer-by-layer assembly via electrostatic attraction. Gold nanoparticles (AuNP) were adsorbed on a biocompatible amine-terminated poly(ethylene glycol) (PEG) polymer brush and further functionalized by poly-l-lysine graft PEG (PLL-PEG) copolymers. Stable yet reversible protein immobilization was achieved via tris(nitrilotriacetic acid) groups incorporated into the PLL-PEG coating. Thus, site-specific immobilization of His-tagged proteins via complexed Ni(II) ions was achieved. Functional protein immobilization on the surface was confirmed by real-time detection of LSPR scattering by reflectance spectroscopy. Association and dissociation rate constants obtained for a reversible protein-protein interaction were in good agreement with the data obtained by other surface-sensitive detection techniques. For spatially resolved detection, AuNP were assembled into micropatterns by means of photolithographic uncaging of surface amines. LSPR imaging of reversible protein-protein interactions was possible in a conventional wide field microscope, yielding detection limits of ∼30 protein molecules within a diffraction-limited surface area.

Cloning, expression and purification of the SRCR domains of glycoprotein 340

Glycoprotein 340 (gp340), an innate immunity molecule is secreted luminally by monolayered epithelia and associated glands within the human oral cavity. Gp340 contains 14 scavenger receptor cysteine rich (SRCR) domains, two CUB (C1r/C1s Uegf Bmp1) domains and one zona pellucida (ZP) domain. Oral streptococci are known to adhere to the tooth immobilized gp340 via its surface protein Antigen I/II (AgI/II), which is considered to be the critical first step in pathogenesis that eventually results in colonization and infection. In order to decipher the interactions between gp340's domains and oral streptococcal AgI/II domains, we undertook to express human gp340's first SRCR domain (SRCR1) and the first three tandem SRCR domains (SRCR123) in Drosophila S2 cells. While our initial attempts with human codons did not produce optimal results, codon-optimization for expression in Drosophila S2 cells and usage of inducible/secretory Drosophila expression system (DES) pMT/BiP/V5-HisA vector greatly enhanced the expression of the SRCR domains. Here we report the successful cloning, expression, and purification of the SRCR domains of gp340. Recognition of expressed SRCRs by the conformational dependent gp340 antibody indicate that these domains are appropriately folded and furthermore, surface plasmon resonance studies confirmed functional adherence of the SRCR domains to AgI/II.

Non-interacting molecules as innate structural probes in surface plasmon resonance

Determining the structural parameters of a molecular layer remains an unresolved problem in surface plasmon resonance (SPR). Given that molecular form and function are intimately coupled, a breakthrough in this area could be of considerable benefit to the study of protein and/or polymer-decorated material interfaces that are ubiquitous in biology and technology. Here, we describe how noninteracting molecules function as innate structural probes that "feel" the intrinsic exclusion volume of a surface-tethered molecular layer in SPR. Importantly, this is noninvasive and provides a means to bypass the refractive index (RI) constraint that convolutes and hinders SPR thickness measurements. To show proof-of-concept, we use BSA molecules in solution to measure the thicknesses of polyethylene glycol (PEG) molecular brushes as a function of molecular weight. The SPR-acquired brush thicknesses scale with PEG hydrodynamic diameter and are in good agreement with atomic force microscopy force-distance measurements. Theoretical treatments that account for changes in the evanescent field decay length at the metal-dielectric interface indicate that the method is most appropriate for low RI layers with an estimated maximal error of ±15% in the thickness due to the RI constraint. Such in situ thickness measurements can be easily incorporated into routine SPR binding assays for investigating mesoscopic structure-function correlations of diverse molecular layers (i.e., biointerfaces).

A comparison of binding surfaces for SPR biosensing using an antibody-antigen system and affinity distribution analysis

The application of optical biosensors in the study of macromolecular interactions requires immobilization of one binding partner to the surface. It is often highly desirable that the immobilization is uniform and does not affect the thermodynamic and kinetic binding parameters to soluble ligands. To achieve this goal, a variety of sensor surfaces, coupling strategies and surface chemistries are available. Previously, we have introduced a technique for determining the distribution of affinities and kinetic rate constants from families of binding and dissociation traces acquired at different concentrations of soluble ligand. In the present work, we explore how this affinity distribution analysis can be useful in the assessment and optimization of surface immobilization. With this goal, using an antibody-antigen interaction as a model system, we study the activity, thermodynamic and kinetic binding parameters, and heterogeneity of surface sites produced with different commonly used sensor surfaces, at different total surface densities and with direct immobilization or affinity capture.

PROBING αIIbβ3: LIGAND INTERACTIONS BY DYNAMIC FORCE SPECTROSCOPY AND SURFACE PLASMON RESONANCE

The interaction between platelet integrin αIIbβ3 and fibrin(ogen) plays a key role in blood clot formation and stability. Integrin antagonists, a class of pharmaceuticals used to prevent and treat cardiovascular disease, are designed to competitively interfere with this process. However, the energetics of the integrin-drug binding are not fully understood, potentially hampering further development of this class of pharmaceuticals. We integrated dynamic force spectroscopy (DFS) and surface plasmon resonance (SPR) to probe the energetics of complex formation between αIIbβ3 and cHarGD, a cyclic peptide integrin antagonist. Analysis of αIIbβ3:cHarGD DFS rupture force data at pulling rates of 14 000 pN/s, 42 000 pN/s and 70 000 pN/s yielded koff = 0.02-0.09 s-1, a dissociation energy barrier [Formula: see text] = 22-29 kJ/mol, and a potential well width x-1 = 0.5-0.8 nm. SPR kinetic data yielded an association rate constant kon = 7 × 103 L/mol-s and a dissociation rate constant koff = 10-2 s-1, followed by a slower stabilization step (τ ~ 400 s). Both DFS and SPR detected minimal interactions between αIIbβ3 and cHarGA demonstrating a key role for electrostatic interactions between the ligand aspartate and the integrin metal ion-dependent adhesion site (MIDAS). Our work provides new insights into the energy landscape of αIIbβ3's interactions with pharmacological and physiological ligands.

Microscale thermophoresis quantifies biomolecular interactions under previously challenging conditions

Microscale thermophoresis (MST) allows for quantitative analysis of protein interactions in free solution and with low sample consumption. The technique is based on thermophoresis, the directed motion of molecules in temperature gradients. Thermophoresis is highly sensitive to all types of binding-induced changes of molecular properties, be it in size, charge, hydration shell or conformation. In an all-optical approach, an infrared laser is used for local heating, and molecule mobility in the temperature gradient is analyzed via fluorescence. In standard MST one binding partner is fluorescently labeled. However, MST can also be performed label-free by exploiting intrinsic protein UV-fluorescence. Despite the high molecular weight ratio, the interaction of small molecules and peptides with proteins is readily accessible by MST. Furthermore, MST assays are highly adaptable to fit to the diverse requirements of different biomolecules, such as membrane proteins to be stabilized in solution. The type of buffer and additives can be chosen freely. Measuring is even possible in complex bioliquids like cell lysate allowing close to in vivo conditions without sample purification. Binding modes that are quantifiable via MST include dimerization, cooperativity and competition. Thus, its flexibility in assay design qualifies MST for analysis of biomolecular interactions in complex experimental settings, which we herein demonstrate by addressing typically challenging types of binding events from various fields of life science.

Bimodal behavior and isobestic transition pathway in surface plasmon resonance sensing

In traditional interpretation of surface plasmon resonance (SPR) sensing and imaging data, total surface coverage of adsorbed or deposited chemical and biological molecules is generally assumed. This homogenous assumption leads to the modeling of monomodal propagation of plasmons on the surface of the metallic film corresponding to a certain relative permittivity and thickness of the medium-such as molecular thin film-next to the metal. In actual SPR Imaging (SPRI) and SPR sensing situations, the plasmonics-active platforms (e.g., biochips) employed may capture the biomolecular targets as aggregates of different domain sizes on the surface of the thin metallic films. Indeed, such binding of target material always has a finite thickness and is characterized by aggregate lateral sizes possibly varying from tens of nanometers to hundreds of micrometers. This paper studies the propagation of surface plasmons in metallic films, with dielectric domain sizes varying within such ranges. Through rigorous coupled wave analysis (RCWA) calculations, it is indicated that when the domain size is small, only a single mode of propagation-i.e. 'monomodal' propagation behavior-occurs as indicated by only one dip in the angular reflectance curves associated with metallic film having a periodically structured array of molecules on its surface. On the other hand, as the domain size is increased, there is a transition from the 'monomodal propagation behavior' to the existence of a 'mixture of monomodal and bimodal propagation behavior', which changes to a purely 'bimodal behavior' after the size of the domain periodicity is increased beyond about ten micron. Such a transition pathway clearly exhibits isobestic points. The calculations presented in this paper can enable correct interpretation of experimental angular or spectral reflectance data.

Nuclear transport receptor binding avidity triggers a self-healing collapse transition in FG-nucleoporin molecular brushes

Conformational changes at supramolecular interfaces are fundamentally coupled to binding activity, yet it remains a challenge to probe this relationship directly. Within the nuclear pore complex, this underlies how transport receptors known as karyopherins proceed through a tethered layer of intrinsically disordered nucleoporin domains containing Phe-Gly (FG)-rich repeats (FG domains) that otherwise hinder passive transport. Here, we use nonspecific proteins (i.e., BSA) as innate molecular probes to explore FG domain conformational changes by surface plasmon resonance. This mathematically diminishes the surface plasmon resonance refractive index constraint, thereby providing the means to acquire and correlate height changes in a surface-tethered FG domain layer to Kap binding affinities in situ with respect to their relative spatial arrangements. Stepwise measurements show that FG domain collapse is caused by karyopherin β1 (Kapβ1) binding at low concentrations, but this gradually transitions into a reextension at higher Kapβ1 concentrations. This ability to self-heal is intimately coupled to Kapβ1-FG binding avidity that promotes the maximal incorporation of Kapβ1 into the FG domain layer. Further increasing Kapβ1 to physiological concentrations leads to a "pileup" of Kapβ1 molecules that bind weakly to unoccupied FG repeats at the top of the layer. Therefore, binding avidity does not hinder fast transport per se. Revealing the biophysical basis underlying the form-function relationship of Kapβ1-FG domain behavior results in a convergent picture in which transport and mechanistic aspects of nuclear pore complex functionality are reconciled.

Fibrinogen, riboflavin, and UVA to immobilize a corneal flap--molecular mechanisms

PURPOSE

Tissue glue containing fibrinogen (FIB) and riboflavin (RF), upon exposure to long wavelength ultraviolet light (UVA, 365 nM) has been proposed potentially to solve long-standing problems presented by corneal wound and epithelial ingrowth side-effects from laser-assisted in situ keratomileuis (LASIK). Data presented in a previous study demonstrated an ability of FIB + RF + UVA to adhere two stromal surfaces; however, to our knowledge no molecular mechanisms have been proposed to account for interactions occurring between corneal extracellular matrix (ECM) and tissue glue molecules. Here, we document several covalent and noncovalent interactions between these classes of macromolecules.

METHODS

SDS-PAGE and Western blot techniques were used to identify covalent interactions between tissue glue molecules and corneal ECM molecules in either the presence or absence of RF and UVA, in vitro and ex vivo. Surface plasmon resonance (SPR) was used to characterize noncovalent interactions, and obtain k(a), k(d), and K(D) binding affinity values.

RESULTS

SDS-PAGE and Western blot analyses indicated that covalent interactions occurred between neighboring FIB molecules, as well as between FIB and collagen type I (Coll-I) proteins (in vitro and ex vivo). These interactions occurred only in the presence of RF and UVA. SPR data demonstrated the ability of FIB to bind noncovalently to corneal stroma molecules, Coll-I, decorin, dermatan sulfate, and corneal basement membrane molecules, laminin and heparan sulfate--only in the presence of Zn(2+).

CONCLUSIONS

Covalent and (zinc-mediated) noncovalent mechanisms involving FIB and stromal ECM molecules contribute to the adhesion created by FIB + RF + UVA.

Nonlinear analyte concentration gradients for one-step kinetic analysis employing optical microring resonators

Conventional methods to probe the binding kinetics of macromolecules at biosensor surfaces employ a stepwise titration of analyte concentrations and measure the association and dissociation to the immobilized ligand at each concentration level. It has previously been shown that kinetic rates can be measured in a single step by monitoring binding as the analyte concentration increases over time in a linear gradient. We report here the application of nonlinear analyte concentration gradients for determining kinetic rates and equilibrium binding affinities in a single experiment. A versatile nonlinear gradient maker is presented, which is easily applied to microfluidic systems. Simulations validate that accurate kinetic rates can be extracted for a wide range of association and dissociation rates, gradient slopes, and curvatures, and with models for mass transport. The nonlinear analyte gradient method is demonstrated with a silicon photonic microring resonator platform to measure prostate specific antigen-antibody binding kinetics.

Application of Aptamer Based Biosensors for Detection of Pathogenic Microorganisms

Aptamer is a kind of synthetic oligonucleotides discriminated by in vitro screening and systematic evolution of exponential enrichment technology (SELEX), which can bind to certain targets (small molecules, proteins, or even entire cells) with extremely high specificity. Owing to the advantages of simple preparation, easy modification and good stability, aptamers have been used to construct biosensors for the detection of pathogenic microorganisms. This paper presents the latest advances in SELEX for screening aptamers for pathogenic microorganisms, demonstrates some reported aptamers for pathogenic microorganisms (protozoa, viruses, bacteria), and reviews aptamer based biosensors for detection of pathogenic microorganisms. Finally, the new trends in aptamer based biosensors for detection of pathogenic microorganisms are also discussed.

Real-Time Analysis of Specific Protein-DNA Interactions with Surface Plasmon Resonance

Several proteins, like transcription factors, bind to certain DNA sequences, thereby regulating biochemical pathways that determine the fate of the corresponding cell. Due to these key positions, it is indispensable to analyze protein-DNA interactions and to identify their mode of action. Surface plasmon resonance is a label-free method that facilitates the elucidation of real-time kinetics of biomolecular interactions. In this article, we focus on this biosensor-based method and provide a detailed guide how SPR can be utilized to study binding of proteins to oligonucleotides. After a description of the physical phenomenon and the instrumental realization including fiber-optic-based SPR and SPR imaging, we will continue with a survey of immobilization methods. Subsequently, we will focus on the optimization of the experiment, expose pitfalls, and introduce how data should be analyzed and published. Finally, we summarize several interesting publications of the last decades dealing with protein-DNA and RNA interaction analysis by SPR.

Molecular interactions of proteins and peptides at interfaces studied by sum frequency generation vibrational spectroscopy

Interfacial peptides and proteins are critical in many biological processes and thus are of interest to various research fields. To study these processes, surface sensitive techniques are required to completely describe different interfacial interactions intrinsic to many complicated processes. Sum frequency generation (SFG) spectroscopy has been developed into a powerful tool to investigate these interactions and mechanisms of a variety of interfacial peptides and proteins. It has been shown that SFG has intrinsic surface sensitivity and the ability to acquire conformation, orientation, and ordering information about these systems. This paper reviews recent studies on peptide/protein-substrate interactions, peptide/protein-membrane interactions, and protein complexes at interfaces and demonstrates the ability of SFG on unveiling the molecular pictures of complicated interfacial biological processes.

The role of nanometer-scaled ligand patterns in polyvalent binding by large mannan-binding lectin oligomers

Mannan-binding lectin (MBL) is an important protein of the innate immune system and protects the body against infection through opsonization and activation of the complement system on surfaces with an appropriate presentation of carbohydrate ligands. The quaternary structure of human MBL is built from oligomerization of structural units into polydisperse complexes typically with three to eight structural units, each containing three lectin domains. Insight into the connection between the structure and ligand-binding properties of these oligomers has been lacking. In this article, we present an analysis of the binding to neoglycoprotein-coated surfaces by size-fractionated human MBL oligomers studied with small-angle x-ray scattering and surface plasmon resonance spectroscopy. The MBL oligomers bound to these surfaces mainly in two modes, with dissociation constants in the micro to nanomolar order. The binding kinetics were markedly influenced by both the density of ligands and the number of ligand-binding domains in the oligomers. These findings demonstrated that the MBL-binding kinetics are critically dependent on structural characteristics on the nanometer scale, both with regard to the dimensions of the oligomer, as well as the ligand presentation on surfaces. Therefore, our work suggested that the surface binding of MBL involves recognition of patterns with dimensions on the order of 10-20 nm. The recent understanding that the surfaces of many microbes are organized with structural features on the nanometer scale suggests that these properties of MBL ligand recognition potentially constitute an important part of the pattern-recognition ability of these polyvalent oligomers.

Gold nanoparticles in biomedical applications: recent advances and perspectives

Gold nanoparticles (GNPs) with controlled geometrical, optical, and surface chemical properties are the subject of intensive studies and applications in biology and medicine. To date, the ever increasing diversity of published examples has included genomics and biosensorics, immunoassays and clinical chemistry, photothermolysis of cancer cells and tumors, targeted delivery of drugs and antigens, and optical bioimaging of cells and tissues with state-of-the-art nanophotonic detection systems. This critical review is focused on the application of GNP conjugates to biomedical diagnostics and analytics, photothermal and photodynamic therapies, and delivery of target molecules. Distinct from other published reviews, we present a summary of the immunological properties of GNPs. For each of the above topics, the basic principles, recent advances, and current challenges are discussed (508 references).

Doing more with less: a method for low total mass, affinity measurement using variable-length nanotethers

Interactions between biomolecules are an important feature of biological systems and understanding these interactions is a key goal in biochemical studies. Using conventional techniques, such as surface plasmon resonance and isothermal titration calorimetry, the determination of the binding constants requires a significant amount of time and resources to produce and purify sufficient quantities of biomolecules in order to measure the affinity of biological interactions. Using DNA hybridization, we have demonstrated a new technique based on the use of nanotethers and time-resolved Forster resonance energy transfer (FRET) that significantly reduces the amount of material required to carry out quantitative binding assays. Test biomolecules were colocalized and attached to a surface using DNA tethers constructed from overlapping oligonucleotides. The length of the tethers defines the concentration of the tethered biomolecule. Effective end concentrations ranging from 56 nM to 3.8 μM were demonstrated. The use of variable length tethers may have wider applications in the quantitative measurement of affinity binding parameters.

Optical biosensors: a revolution towards quantum nanoscale electronics device fabrication

The dimension of biomolecules is of few nanometers, so the biomolecular devices ought to be of that range so a better understanding about the performance of the electronic biomolecular devices can be obtained at nanoscale. Development of optical biomolecular device is a new move towards revolution of nano-bioelectronics. Optical biosensor is one of such nano-biomolecular devices that has a potential to pave a new dimension of research and device fabrication in the field of optical and biomedical fields. This paper is a very small report about optical biosensor and its development and importance in various fields.

The intracellular trafficking pathway of transferrin

BACKGROUND

Transferrin (Tf) is an iron-binding protein that facilitates iron-uptake in cells. Iron-loaded Tf first binds to the Tf receptor (TfR) and enters the cell through clathrin-mediated endocytosis. Inside the cell, Tf is trafficked to early endosomes, delivers iron, and then is subsequently directed to recycling endosomes to be taken back to the cell surface.

SCOPE OF REVIEW

We aim to review the various methods and techniques that researchers have employed for elucidating the Tf trafficking pathway and the cell-machinery components involved. These experimental methods can be categorized as microscopy, radioactivity, and surface plasmon resonance (SPR).

MAJOR CONCLUSIONS

Qualitative experiments, such as total internal reflectance fluorescence (TIRF), electron, laser-scanning confocal, and spinning-disk confocal microscopy, have been utilized to determine the roles of key components in the Tf trafficking pathway. These techniques allow temporal resolution and are useful for imaging Tf endocytosis and recycling, which occur on the order of seconds to minutes. Additionally, radiolabeling and SPR methods, when combined with mathematical modeling, have enabled researchers to estimate quantitative kinetic parameters and equilibrium constants associated with Tf binding and trafficking.

GENERAL SIGNIFICANCE

Both qualitative and quantitative data can be used to analyze the Tf trafficking pathway. The valuable information that is obtained about the Tf trafficking pathway can then be combined with mathematical models to identify design criteria to improve the ability of Tf to deliver anticancer drugs. This article is part of a Special Issue entitled Transferrins: Molecular mechanisms of iron transport and disorders.

Determination of binding kinetics using whispering gallery mode microcavities

Silica optical microcavity sensors show great promise in the kinetic evaluation of binding pairs, fundamental in understanding biomolecular interactions. Here, we develop and demonstrate a novel platform, based on bioconjugated silica microsphere resonators, to study the binding kinetics of the biotin-streptavidin system. We characterize the optical performance, verify the covalent attachment of biotin to the surface, and perform streptavidin detection experiments. We perform preliminary kinetic analysis of the detection data which shows the potential of whispering gallery mode resonators in the determination of the dissociation constant of the binding pair, which is in good agreement with previously published values.

Protein-protein interactions: principles, techniques, and their potential role in new drug development

A vast network of genes is inter-linked through protein-protein interactions and is critical component of almost every biological process under physiological conditions. Any disruption of the biologically essential network leads to pathological conditions resulting into related diseases. Therefore, proper understanding of biological functions warrants a comprehensive knowledge of protein-protein interactions and the molecular mechanisms that govern such processes. The importance of protein-protein interaction process is highlighted by the fact that a number of powerful techniques/methods have been developed to understand how such interactions take place under various physiological and pathological conditions. Many of the key protein-protein interactions are known to participate in disease-associated signaling pathways, and represent novel targets for therapeutic intervention. Thus, controlling protein-protein interactions offers a rich dividend for the discovery of new drug targets. Availability of various tools to study and the knowledge of human genome have put us in a unique position to understand highly complex biological network, and the mechanisms involved therein. In this review article, we have summarized protein-protein interaction networks, techniques/methods of their binding/kinetic parameters, and the role of these interactions in the development of potential tools for drug designing.

Binding of α,α-disubstituted amino acids to arginase suggests new avenues for inhibitor design

Arginase is a binuclear manganese metalloenzyme that hydrolyzes L-arginine to form L-ornithine and urea, and aberrant arginase activity is implicated in various diseases such as erectile dysfunction, asthma, atherosclerosis, and cerebral malaria. Accordingly, arginase inhibitors may be therapeutically useful. Continuing our efforts to expand the chemical space of arginase inhibitor design and inspired by the binding of 2-(difluoromethyl)-L-ornithine to human arginase I, we now report the first study of the binding of α,α-disubstituted amino acids to arginase. Specifically, we report the design, synthesis, and assay of racemic 2-amino-6-borono-2-methylhexanoic acid and racemic 2-amino-6-borono-2-(difluoromethyl)hexanoic acid. X-ray crystal structures of human arginase I and Plasmodium falciparum arginase complexed with these inhibitors reveal the exclusive binding of the L-stereoisomer; the additional α-substituent of each inhibitor is readily accommodated and makes new intermolecular interactions in the outer active site of each enzyme. Therefore, this work highlights a new region of the protein surface that can be targeted for additional affinity interactions, as well as the first comparative structural insights on inhibitor discrimination between a human and a parasitic arginase.

Amplified surface plasmon resonance based DNA biosensors, aptasensors, and Hg2+ sensors using hemin/G-quadruplexes and Au nanoparticles

Thiolated nucleic acid hairpin nanostructures that include in their stem region a "caged" G-quadruplex sequence, and in their single-stranded loop region oligonucleotide recognition sequences for DNA, adenosine monophosphate (AMP), or Hg(2+) ions were linked to bare Au surfaces or to Au nanoparticles (NPs) linked to Au surfaces. The opening of the hairpin nanostructures associated with the bare Au surface by the complementary target DNA, AMP substrate, or Hg(2+) ions, in the presence of hemin, led to the self-assembly of hemin/G-quadruplexes on the surface. The resulting dielectric changes on the surface exhibited shifts in the surface plasmon resonance (SPR) spectra, thus providing a readout signal for the recognition events. A similar opening of the hairpin nanostructures, immobilized on the Au NPs associated with the Au surface, by the DNA, AMP, or Hg(2+) led to an ultrasensitive SPR-amplified detection of the respective analytes. The amplification originated from the coupling between the localized surface plasmon associated with the NPs and the surface plasmon wave, an effect that cooperatively amplifies the SPR shifts that result from the formation of the hemin/G-quadruplexes. The different sensing platforms reveal impressive sensitivities and selectivities toward the target analytes.

Kinetics of leucine-lysine peptide adsorption and desorption at -CH3 and -COOH terminated alkylthiolate monolayers

The kinetics of adsorption and desorption of two highly asymmetrical model peptides were studied at methyl- and carboxylic acid-terminated alkylthiolate self-assembled monolayer (SAM) surfaces on gold. The model peptides were leucine-lysine (LK), α-helical (LKα14), and β-strand (LKβ15) peptides that have a well-defined secondary structure with the leucines localized on one side and the lysines on the other side. These secondary structures were previously shown to be maintained after adsorption and to control LK peptide orientation on these surfaces. The kinetics of peptide adsorption were analyzed by surface plasmon resonance as a function of peptide solution concentrations at pH 7.4. Peptide desorption was measured by rinsing with a buffer at various times along the adsorption curve. Both peptides had a saturation coverage of approximately 1 ML (monolayer) on the carboxyl SAM. Both peptides exhibited mostly irreversible binding on both surfaces, but the LKα14 peptide showed some limited reversible binding. Reversibly bound peptides could be in the second adlayer interacting only with peptides in the first layer or peptides interacting with a partially covered adsorption site and therefore not able to fully bind to the SAM surface. The near complete lack of reversible binding for LKβ15 is possibly due to strong peptide-peptide hydrogen bonding in β-sheet structures within the adsorbed layer. For a given dose of either peptide, much less peptide adsorbed on the methyl SAMs. The adsorption rate of irreversibly bound LKα14 on carboxylic acid SAMs was first-order with respect to solution concentration. Both peptides showed nucleation-like adsorption kinetics on the carboxylic acid SAM, indicating that peptide-peptide bonding is needed to stabilize the adsorbed layer. Adsorption on the methyl SAM was much lower in quantity for both peptides and seemed to require prior aggregation of the proteins in solution, at least for LKβ15.

Sulfiredoxin-Peroxiredoxin IV axis promotes human lung cancer progression through modulation of specific phosphokinase signaling

Oxidative stress is known to cause tumorigenesis through induction of DNA and lipid damage. It also promotes cancer progression through a largely unknown mechanism. Sulfiredoxin (Srx) is a novel oxidative stress-induced antioxidant protein whose function in tumorigenesis and cancer progression has not been well studied. We report that Srx is highly expressed in human lung cancer. Knockdown of Srx reduces anchorage-independent colony formation, cell migration, and invasion of human lung cancer cells. Srx preferentially interacts with Peroxiredoxin (Prx) IV relative to other Prxs due to its intrinsic higher binding affinity. Knockdown of Prx IV recapitulates the phenotypic changes of depleting Srx. Disruption or enhancement of the Srx-Prx IV axis leads respectively to reduction or acceleration of tumor growth and metastasis formation in vivo. Through identification and validation of the downstream mediators we unraveled the Srx-mediated signaling network that traverses AP-1-activating and other phosphokinase signaling cascades. Our work reveals that the Srx-Prx IV axis is critical for lung cancer maintenance and metastasis, suggesting that targeting the Srx-Prx IV axis may provide unique effective strategies for cancer prevention and treatment.

Characterization of the interactions between the nucleoprotein and the phosphoprotein of Henipavirus

The Henipavirus genome is encapsidated by the nucleoprotein (N) within a helical nucleocapsid that recruits the polymerase complex via the phosphoprotein (P). In a previous study, we reported that in henipaviruses, the N-terminal domain of the phosphoprotein and the C-terminal domain of the nucleoprotein (N(TAIL)) are both intrinsically disordered. Here we show that Henipavirus N(TAIL) domains are also disordered in the context of full-length nucleoproteins. We also report the cloning, purification, and characterization of the C-terminal X domains (P(XD)) of Henipavirus phosphoproteins. Using isothermal titration calorimetry, we show that N(TAIL) and P(XD) form a 1:1 stoichiometric complex that is stable under NaCl concentrations as high as 1 M and has a K(D) in the μM range. Using far-UV circular dichroism and nuclear magnetic resonance, we show that P(XD) triggers an increase in the α-helical content of N(TAIL). Using fluorescence spectroscopy, we show that P(XD) has no impact on the chemical environment of a Trp residue introduced at position 527 of the Henipavirus N(TAIL) domain, thus arguing for the lack of stable contacts between the C termini of N(TAIL) and P(XD). Finally, we present a tentative structural model of the N(TAIL)-P(XD) interaction in which a short, order-prone region of N(TAIL) (α-MoRE; amino acids 473-493) adopts an α-helical conformation and is embedded between helices α2 and α3 of P(XD), leading to a relatively small interface dominated by hydrophobic contacts. The present results provide the first detailed experimental characterization of the N-P interaction in henipaviruses and designate the N(TAIL)-P(XD) interaction as a valuable target for rational antiviral approaches.

Aptamer-functionalized in situ injectable hydrogel for controlled protein release

Various in situ injectable hydrogels have been developed for protein delivery in treating human diseases. However, most hydrogels are highly permeable, which can lead to the rapid release of loaded proteins. The purpose of this study is to apply nucleic acid aptamers to functionalize an in situ injectable hydrogel model to control the release of proteins. The aptamers were studied using secondary structural predictions and binding analyses. The results showed that the structural predictions were different from the experimental measurements in numerous cases. The affinity of the aptamer was significantly affected by the mutations of the essential nucleotides, whereas it was not significantly affected by the variations of the nonessential nucleotides. The mutated aptamers were then used to functionalize the injectable hydrogel model. The results showed that the aptamer-functionalized hydrogel could prolong protein release. Moreover, the release rates could be controlled by adjusting the affinity of the aptamer.

A Highly Sensitive and Selective Surface-Enhanced Nanobiosensor

Nanosphere lithography (NSL) derived triangular Ag nanoparticles were used to create an extremely sensitive and specific optical biological and chemical nanosensor. Using simple UV-vis spectroscopy, biotinylated surface-confined Ag nanoparticles were used to detect streptavidin down to one picomolar concentrations. The system was tested for nonspecific binding interactions with bovine serum albumin and was found to display virtually no adverse results. The extremely sensitive and selective response of the Ag nanoparticle sensor indicates an exciting use for biological and chemical sensing.

Narrow groove plasmonic nano-gratings for surface plasmon resonance sensing

We present a novel surface plasmon resonance (SPR) configuration based on narrow groove (sub-15 nm) plasmonic nano-gratings such that normally incident radiation can be coupled into surface plasmons without the use of prism-coupling based total internal reflection, as in the classical Kretschmann configuration. This eliminates the angular dependence requirements of SPR-based sensing and allows development of robust miniaturized SPR sensors. Simulations based on Rigorous Coupled Wave Analysis (RCWA) were carried out to numerically calculate the reflectance - from different gold and silver nano-grating structures - as a function of the localized refractive index of the media around the SPR nano-gratings as well as the incident radiation wavelength and angle of incidence. Our calculations indicate substantially higher differential reflectance signals, on localized change of refractive index in the narrow groove plasmonic gratings, as compared to those obtained from conventional SPR-based sensing systems. Furthermore, these calculations allow determination of the optimal nano-grating geometric parameters - i. e. nanoline periodicity, spacing between the nanolines, as well as the height of the nanolines in the nano-grating - for highest sensitivity to localized change of refractive index, as would occur due to binding of a biomolecule target to a functionalized nano-grating surface.

Salt concentration effects on equilibrium melting curves from DNA microarrays

DNA microarrays find applications in an increasing number of domains where more quantitative results are required. DNA being a charged polymer, the repulsive interactions between the surface of the microarray and the targets in solution are increasing upon hybridization. Such electrostatic penalty is generally reduced by increasing the salt concentration. In this article, we present equilibrium-melting curves obtained from dedicated physicochemical experiments on DNA microarrays in order to get a better understanding of the electrostatic penalty incurred during the hybridization reaction at the surface. Various salt concentrations have been considered and deviations from the commonly used Langmuir adsorption model are experimentally quantified for the first time in agreement with theoretical predictions.

Surface plasmon resonance biosensing in studies of the binding between β₂ integrin I domains and their ligands

Measurements on the kinetic aspects of binding between macromolecular species such as proteins have been greatly advanced by the application of surface plasmon resonance (SPR) biosensors. In studies of ligand binding by integrin I domains, technologies such as the BIAcore instruments have provided important insights into the role of conformational regulation. This chapter describes a protocol for studying the binding between the I domain from integrin α(X)β(2) and its ligand iC3b. Also included are topics on the interpretation of data. Integrin I domains appear to support heterogeneous interactions with ligands, which pose significant challenges in deriving valid information on the binding kinetics from the SPR measurements. Fortunately, new algorithms are available that may resolve even complex ligand-binding reactions; with the application to data on the binding between the α(X) I domain, a more consistent and unambiguous result is obtained compared to those obtained by classical approaches for analyzing SPR biosensor data.

SPR-based single nucleotide mismatch biosensor

The detection and characterization of the hybridization event of 21-base, unlabeled DNA oligonucleotides with a monolayer of complementary DNA immobilized on a gold surface, by electrochemical impedance spectroscopy and surface plasmon resonance (SPR) is presented. A thiol modification on the probe DNA strand allowed for its attachment to the surface via self-assembly. For the hybridization of full match target DNA a detection limit of 20 pM was determined. RNA hybridization was also detectable with the same sensor, with a similar detection limit. The SPR signal generated upon hybridization of the full match was always distinguishable from the single mismatch target DNA oligonucleotides when the mismatch was in the middle or at the proximal end of the target DNA sequence. However, the response of the sensor was identical for the hybridization of the full match and the distal end mismatch. The SPR sensor described is reusable over at least 20 hybridization/regeneration cycles and is insensitive to flow rate (20-800 µL min-1) or temperature (20-60 °C). Based on the SPR response, the surface density of the probe was estimated to be at least 4.3 × 1012 molecules per cm2.

Allosteric cross talk between cadherin extracellular domains

Atomic force microscopy and surface force apparatus measurements determined the functional impact of the cadherin point mutation W2A and domain deletion mutations on C-cadherin binding signatures. Direct comparison of results obtained using both experimental approaches demonstrates that C-cadherin ectodomains form multiple independent bonds that require different structural regions. The results presented reveal significant interdomain cross talk. They further demonstrate that the mutation W2A not only abolishes adhesion between N-terminal domains, but allosterically modulates other binding states that require functional domains distal to the N-terminal binding site. Such allosteric effects may play a prominent role in modulating adhesion by Type I classic cadherins, cadherin oligomerization at junctional contacts, and propagation of binding information to the cytoplasmic region.

Free-solution interaction assay of carbonic anhydrase to its inhibitors using back-scattering interferometry

Back-scattering interferometry (BSI) is a label-free, free-solution, small-volume technique used for characterizing binding interactions, which is also relevant to a growing number of biosensing applications including drug discovery. Here, we use BSI to characterize the interaction of carbonic anhydrase enzyme II with five well-known carbonic anhydrase enzyme II inhibitors (± sulpiride, sulfanilamide, benzene sulfonamide, dansylamide, and acetazolamide) in the presence of DMSO. Dissociation constants calculated for each interaction were consistent with literature values previously obtained using surface plasmon resonance and fluorescence-based competition assays. Results demonstrate the potential of BSI as a drug-screening tool which is fully compatible with DMSO and does not require immobilization or labeling, therefore allowing binding interactions to be characterized in the native state. BSI has the potential for reducing labor costs, sample consumption, and assay time while providing enhanced reliability over existing techniques.

The feet of the measles virus polymerase bind the viral nucleocapsid protein at a single site

Measles virus has a single-stranded RNA genome that is organized into a helical complex by the viral N protein. The resulting structure is termed the nucleocapsid and is traversed by the viral polymerase during RNA synthesis. The P protein, the noncatalytic subunit of the polymerase, provides the "legs and feet" that allow the polymerase to walk along its protein-RNA template. The polymerase feet are very simple three-helix bundles, only 50 amino acids in size. Previously, we have shown that these feet grasp the viral N protein during movement by attaching to a short sequence (amino acids 487-503) within the disordered and surface-exposed tail of N, causing it to fold into a helix. The result is a weak-affinity complex with a short lifetime, which would allow the polymerase to take rapid steps forward. The structure of the complex was determined using X-ray crystallography. This simple model of binding was challenged by a paper in this journal, claiming that a downstream sequence in the tail of N (amino acids 517-525) was also critical for the association. Its presence was reported to enhance the overall affinity of the polymerase feet for N by three orders of magnitude. We have, therefore, examined binding of the polymerase foot domain to amino acids 477-525 of N using quantitative biophysical techniques, and compared the results to our previous binding studies, performed using amino acids 477-505 of N. We find no evidence that the sequence downstream of amino acid 505 influences binding, validating the original single-site binding model.