Mathematical Modeling of Release Kinetics from Supramolecular Drug Delivery Systems

Subdiffusion equation with Caputo fractional derivative with respect to another function in modeling diffusion in a complex system consisting of a matrix and channels

Anomalous diffusion of an antibiotic (colistin) in a system consisting of packed gel (alginate) beads immersed in water is studied experimentally and theoretically. The experimental studies are performed using the interferometric method of measuring concentration profiles of a diffusing substance. We use the g-subdiffusion equation with the fractional Caputo time derivative with respect to another function g to describe the process. The function g and relevant parameters define anomalous diffusion. We show that experimentally measured time evolution of the amount of antibiotic released from the system determines the function g. The process can be interpreted as subdiffusion in which the subdiffusion parameter (exponent) α decreases over time. The g-subdiffusion equation, which is more general than the "ordinary" fractional subdiffusion equation, can be widely used in various fields of science to model diffusion in a system in which parameters, and even a type of diffusion, evolve over time. We postulate that diffusion in a system composed of channels and a matrix can be described by the g-subdiffusion equation, just like diffusion in a system of packed gel beads placed in water.

Tablet Formulation of 2-((3-(Chloromethyl)benzoyl)oxy)benzoic Acid by Linear and Quadratic Models

PURPOSE

This research determines the effect of sodium lauryl sulfate (SLS) as a surfactant, croscarmellose sodium (CS) as a disintegrating agent, and SLS-CS combinations on 2-((3-(chloromethyl)benzoyl)oxy)benzoic acid (3CH2Cl) (log P = 3.73) tablet formulations. In addition, this study aims to determine the optimum of the 3CH2Cl tablet formula.

METHODS

The tablets are manufactured through direct compression according to the simplex lattice design. The optimal SLS and CS concentration was determined in vitro using linear and quadratic models to achieve better tablet disintegration and dissolution.

RESULTS

The same linear and quadratic coefficient profiles of SLS and CS indicate that the combined coefficient of SLS-CS with a quadratic model can be used to predict the effect of the SLS-CS combination. Based on the linear model coefficients, SLS and CS increase the value of flow time (9.35; 7.65), Carr index (26.17; 21.17), hardness (9.84; 7.44), friability (0.38; 0.31), disintegrating time (5.74; 2.62), and drug release (84.28; 58.65). The quadratic model coefficient shows that SLS-CS combinations increase flow time (0.60), Carr index (2.00), hardness (1.00), and disintegrating time (1.04). Meanwhile, they decrease friability (-0.02) and drug release (-9.10).

CONCLUSIONS

SLS, CS, and SLS-CS combinations affect the quality of tablet mass and tablets. The optimum tablet formula was 3CH2Cl (300 mg), Ne (9.38%), SLS (0.92%), CS (2.33%), MCC (5%), and SDL (ad 800 mg). 3CH2Cl has analgesic activity despite the presence of tablet excipients. The 3CH2Cl tablet is an innovative formulation and a new alternative for future analgesic drugs.

The Fabrication of Docetaxel-Containing Emulsion for Drug Release Kinetics and Lipid Peroxidation

Docetaxel (DTX)-based formulation development is still confronted with significant challenges, due to its refractory solubility and side effects on normal tissues. Inspired by the application of the transdermal drug delivery model to topical treatment, we developed a biocompatible and slow-release DTX-containing emulsion via self-assembly prepared by a high-speed electric stirring method and optimized the formulation. The results of accelerated the emulsion stability experiment showed that the emulsion prepared at 10,000 rpm/min had a stability of 89.15 ± 2.05%. The ADME, skin irritation, skin toxicity and molecular interaction between DTX and excipients were predicted via Discovery Studio 2016 software. In addition, DTX addition in oil or water phases of the emulsion showed different release rates in vitro and ex vivo. The DTX release ex vivo of the DTX/O-containing emulsion and the DTX/W-containing emulsion were 45.07 ± 5.41% and 96.48 ± 4.54%, respectively. In vitro antioxidant assays and anti-lipid peroxidation models revealed the antioxidant potential of DTX. However, DTX-containing emulsions could maintain and even enhance the antioxidant effect, both scavenging free radicals in vitro and inhibiting the process of lipid peroxidation.

IVIVC of Octreotide in PLGA-Glucose Microsphere Formulation, Sandostatin® LAR

In vitro-in vivo correlation (IVIVC) analysis reveals a relationship between in vitro release and in vivo pharmacokinetic response of the drug of interest. Sandostatin LAR Depot (SLD) for endocrine tumors and acromegaly is a sustained-release formulation of octreotide, a cyclic oligomer of 8 amino acids, which prolongs therapeutic efficacy and enhances medication compliance of octreotide. Since the efficacy of SLD is dependent on the pharmacokinetic characteristics of octreotide released from a biodegradable matrix polymer, poly(lactide-co-glycolide)-glucose, of SLD, the IVIVC of SLD is critical for predicting an in vivo behavior of the octreotide. In this study, in vitro release of octreotide from SLD was investigated using the release test media each containing 0.02% or 0.5% surfactant and having different pH values of 7.4 and 5.5. In vivo pharmacokinetic profiles of SLD were determined by LC-MS/MS analysis of the systemic blood concentration of octreotide after the SLD injection to rodents. In IVIVC analysis, the Weibull model was adopted as a drug release model for biodegradable microsphere formulation. The IVIVC analyses revealed the in vitro release test condition of SLD with the highest IVIV correlation coefficient. By applying the in vitro release data to the model derived from the IVIVC analysis, pharmacokinetic parameters of SLD could be predicted with the prediction error of ± 10 ~ 15%. IVIVC analysis and pharmacokinetic prediction model of SLD in our study can be an efficient tool for the development of long-acting pharmaceutical dosage forms.

Do Different Sutures with Triclosan Have Different Antimicrobial Activities? A Pharmacodynamic Approach

(1) Background: Three antimicrobial absorbable sutures have different triclosan (TS) loads, triclosan release kinetics and hydrolysis times. This in vitro study aims to analyse and compare their antimicrobial pharmacodynamics. (2) Methods: Time-kill assays were performed with eight triclosan-susceptible microorganisms common in surgical site infections (SSIs) and a segment of each TS. Microbial concentrations were measured at T0, T4, T8 and T24 h. Similar non-triclosan sutures (NTS) were used as controls. Microbial concentrations were plotted and analysed with panel analysis. They were predicted over time with a double-exponential model and four parameters fitted to each TS × microorganism combination. (3) Results: The microbial concentration was associated with the triclosan presence, timeslot and microorganism. It was not associated with the suture material. All combinations shared a common pattern with an early steep concentration reduction from baseline to 4-8 h, followed by a concentration up to a 24-h plateau in most cases with a mild concentration increase. (4) Conclusions: Microorganisms seem to be predominantly killed by contact or near-contact killing with the suture rather than the triclosan concentration in the culture medium. No significant in vitro antimicrobial pharmacodynamic difference between the three TS is identified. Triclosan can reduce the suture microbial colonisation and SSI risk.

Mucoadhesive nanoemulsion enhances brain bioavailability of luteolin after intranasal administration and induces apoptosis to sh-sy5y neuroblastoma cells

Neuroblastoma is the most frequently diagnosed extracranial solid tumor in children and accounts for 7% of all childhood malignancies and 15% cancer mortality in children. Luteolin (LUT) is recognized by its anticancer activity against several types of cancer. The aim of this study was to prepare chitosan-coated nanoemulsion containing luteolin (NECh-LUT), investigate its potential for brain delivery following intranasal administration, and to evaluate its cytotoxicity against neuroblastoma cells. NECh-LUT was developed by cavitation process and characterized for its size, surface charge, encapsulation efficiency, and mucoadhesion. The developed formulation presented size 68±1 nm, zeta potential +13±1 mV, and encapsulation efficiency of 85.5±0.3%. The NECh-LUT presented nearly 6-fold higher permeation through the nasal mucosa ex vivo and prolonged LUT release up to 72 h in vitro, following Baker-Lonsdale kinetic model. The pharmacokinetic evaluation of NECh-LUT revealed a 10-fold increase in drug half-life and a 4.4 times enhancement in LUT biodistribution in brain tissue after intranasal administration of single-dose. In addition, NECh-LUT inhibited the growth of neuroblastoma cells after 24, 48 and 72 h in concentrations starting from 2 µM. The NECh-LUT developed for intranasal administration proved to be a promising alternative for brain delivery of LUT, and a viable option for the treatment of neuroblastoma.

Hydrogel beads based on carboxymethyl cassava starch/alginate enriched with MgFe2O4 nanoparticles for controlling drug release

Implementing novel oral drug delivery systems with controlled drug release behavior is valuable in cancer therapy. Herein, a green synthetic approach based on the sol-gel technique was adopted to prepare MgFe₂O₄ nanoparticles at different calcination temperatures using citric acid as a chelating/combustion agent. In this context, pH-responsive and magnetic carboxymethyl starch/alginate hydrogel beads (CMCS-SA) containing the MgFe₂O₄ nanoparticles were developed as potential drug carriers for the anticancer drug (Doxorubicin, Dox) release in simulated gastrointestinal fluids. Furthermore, in vitro release behaviors validated that these beads illustrated excellent stability in the simulated stomach liquids. In contrast, the data in simulated intestinal fluids showed sustained release of Dox because of their pH-sensitive swelling characteristics. Notably, applying an external magnetic field (EMF) could accelerate drug release from the beads. The in vitro release of drugs from gel beads was mainly accomplished by a combination of diffusion, swelling and erosion. Moreover, the cell cytotoxicity test and laser confocal results showed no harmful effects on normal cells (3T3) but were significant cytotoxic to colon cancer cell lines (HCT116) by drug-loaded hydrogel beads. Therefore, the prepared gel beads could be qualified as latent platforms for controlling the release of anticancer drugs in cancer treatment.

Multi-Stimuli-Responsive Janus Hollow Polydopamine Nanotubes

A tubular-shaped Janus nanoparticle based on polydopamine that responds to near-infrared, magnetic, and pH stimuli is reported. The robust tubular polydopamine structure was obtained by optimizing the halloysite template-to-dopamine ratio during synthesis. The inner and outer surfaces of the tube were exposed at different steps of the template-sonication--etching process, enabling the differential surface modification of these surfaces. Poly(ethylene glycol) (PEG) and poly(N-isopropylacrylamide) (PNIPAM) were grafted to the outer and inner surface of the nanotube, respectively. The PEG-coated surface limited aggregation of the nanoparticles at elevated temperatures. The PNIPAM-coated interior enhanced doxorubicin loading and endowed the nanoparticle with temperature-responsive behavior. The deposition of precipitated Fe₃O₄ nanoparticles further modified the nanoparticles. The resulting magnetic Janus nanoparticles responded to pH, temperature, and magnetic fields. Temperature changes could be induced by near-infrared laser, and all three stimuli were found to influence release rates of adsorbed doxorubicin from the nanoparticles. The interaction of the stimuli on release kinetics was elucidated using a linear mixed model; reduced pH and NIR irradiation enhanced release while applying a static magnetic field retarded release. Furthermore, the mechanism was shifted toward Fickian behavior by applying a static magnetic field and low pH conditions. However, NIR irradiation only shifted the behavior toward Fickian behavior at low pH.

In Vitro Evaluation of Kaempferol-Loaded Hydrogel as pH-Sensitive Drug Delivery Systems

The purpose of this study was to prepare and evaluate kaempferol-loaded carbopol polymer (acrylic acid) hydrogel, investigate its antioxidant activity in vitro, and compare the effects on drug release under different pH conditions. Drug release studies were conducted in three different pH media (pH 3.4, 5.4, and 7.4). The kaempferol-loaded hydrogel was prepared by using carbopol 934 as the hydrogel matrix. The morphology and viscosity of the preparation were tested to understand the fluidity of the hydrogel. The antioxidant activity of the preparation was studied by scavenging hydrogen peroxide and 2,2-diphenyl-1-picrilhidrazil (DPPH) radicals in vitro and inhibiting the production of malondialdehyde in mouse tissues. The results showed that kaempferol and its preparations had high antioxidant activity. In vitro release studies showed that the drug release at pH 3.4, 5.4, and 7.4 was 27.32 ± 3.49%, 70.89 ± 8.91%, and 87.9 ± 10.13%, respectively. Kaempferol-loaded carbopol hydrogel displayed greater swelling and drug release at higher pH values (pH 7.4).

Increasing the Hydrophobic Component of Poloxamers and the Inclusion of Salt Extend the Release of Bupivacaine from Injectable In Situ Gels, While Common Polymer Additives Have Little Effect

Various strategies have been applied to reduce the initial burst of drug release and sustain release from poloxamer-based thermoresponsive gels. This work focussed on investigating different formulation approaches to minimise the initial burst of release and sustain the release of the small hydrophilic drug bupivacaine hydrochloride from poloxamer-based thermoresponsive gels. Various in situ gel formulations were prepared by varying the polypropylene oxide (PPO)/polyethylene oxide (PEO) ratio and by adding additives previously described in the literature. It was observed that increasing the PPO/PEO ratio from 0.28 to 0.30 reduced the initial burst release from 17.3% ± 1.8 to 9.1% ± 1.2 during the first six hours and extended the release profile from 10 to 14 days. Notably, the inclusion of sodium chloride (NaCl 0.4% w/w) further reduced the initial burst release to 1.8% ± 1.1 over the first 6 h. Meanwhile, physical blending with additive polymers had a negligible effect on the burst release and overall release profile. The findings suggest that extended release of bupivacaine hydrochloride, with reduced initial burst release, can be achieved simply by increasing the PPO/PEO ratio and the inclusion of NaCl.

Liposomes encapsulating novel antimicrobial peptide Omiganan: Characterization and its pharmacodynamic evaluation in atopic dermatitis and psoriasis mice model

Omiganan is a novel 12 amino acid synthetic cationic peptide from the cathelicidin family. Omiganan possesses antimicrobial action against a wide range of microbes, including gram-positive and gram-negative bacteria and fungi. Omiganan mainly acts by depolarizing the cytoplasmic membrane, resulting in cellular disruption and death. Apart from its antimicrobial effect, Omiganan also has anti-inflammatory activity. The present investigation aimed to evaluate and compare the efficacy of Omiganan liposomal gel with conventional formulations (Omiganan gel and lotion) in atopic dermatitis (AD) and psoriasis mice animal models. Liposomes encapsulating Omiganan were prepared using the reverse-phase evaporation technique and incorporated into Carbopol 934P gel. The optimized Omiganan liposomes were then characterized for various physicochemical parameters such as vesicle size, shape and surface morphology, zeta-potential, rheological parameters, in-vitro drug release, ex-vivo skin permeation/deposition, in-vitro antimicrobial activity, proteolytic stability, and cellular toxicity and uptake studies. Liposomes exhibited 72 % encapsulation with 7.8 % loading efficacy, a vesicle size, and zeta potential of 120 nm and - 17.2 mv, respectively. Moreover, Omiganan liposomal gel demonstrated controlled release and a better permeation profile than conventional formulations. A substantial reduction in levels of pro-inflammatory cytokines and improvement in AD and psoriatic lesions were achieved by Omiganan liposomal gel compared to Omiganan gel and lotion-based formulations. The present study confirms that Omiganan liposomal formulation can be an effective, safe, and novel alternative treatment approach in atopic dermatitis and psoriasis.

Multiparticulate Systems of Meloxicam for Colonic Administration in Cancer or Autoimmune Diseases

The aim of this research is the development of new colonic release systems of meloxicam (MLX) a non-steroidal anti-inflammatory drug (NSAIDs) with pH and time-dependent vehicles for cancer or autoimmune diseases. The colon has a higher pH than the rest of the gastrointestinal tract (GIT) and this can be used as a modified release strategy. Eudragit^® polymers are the most widely used synthetic products in the design of colonic release formulations because they might offer mucoadhesiveness and pH-dependent release. Colonic delivery systems produced with pH-dependent and permeable polymers (FS-30D) or with pH-independent and low permeability polymers (NM-30D), must dissolve at a pH range of 6.0–7.0 to delay the release of the drug and prevent degradation in the GIT, before reaching the colon. The conditions prepared to simulate a gastrointestinal transit showed the CNM multiparticulate system, composed of Eudragit^® NM and cellulose, as the best release option for MLX with a more sustained release with respect to the other formulations. CNM formulation followed Higuchi and First-order release kinetics, thus MLX release was controlled by a combination of diffusion and polymers swelling/eroding processes.

Tea Tree Oil Nanoemulsion-Based Hydrogel Vehicle for Enhancing Topical Delivery of Neomycin

The present investigation aims to improve the antimicrobial influence of certain antibacterial drugs, namely, neomycin (NEO), exploiting the benefits of natural oils such as tea tree oil (TTO). Therefore, a distinctive nanolipid formulation, namely, a nanoemulsion (NE), was developed using a Central Composite Factorial Design (CCD) approach depending on the amount of TTO and tween 80 as surfactant. The optimized NEO-NE formula exhibiting minimum globular size and maximum in vitro release was selected. For efficient topical delivery, NEO-NE was incorporated into a pre-formulated hydrogel. The developed NEO-NE-hydrogel was characterized by its physical characteristics such as pH, viscosity, and spreadability. Next, it was tested for stability under different conditions for 3 months. Ultimately, an irritation test was conducted followed by an antibacterial examination. The preparation demonstrated acceptable properties to be successfully applied topically. It showed non-significant changes in stability in both conditions up to 3 months storage when compared to a fresh preparation. It exhibited no irritation when applied on hairless animal skin. Finally, TTO revealed a good inhibition for the bacterial growth that could improve the influence of NEO antibacterial activity, indicating the efficiency of NE containing NEO prepared with TTO to be a promising antibacterial nanocarrier.

Targeting Colorectal Cancer Cells with Niosomes Systems Loaded with Two Anticancer Drugs Models; Comparative In Vitro and Anticancer Studies

Colorectal cancer (CRC) is considered one of the most commonly diagnosed malignant diseases. Recently, there has been an increased focus on using nanotechnology to resolve most of the limitations in conventional chemotherapy. Niosomes have great advantages that overcome the drawbacks associated with other lipid drug delivery systems. They are simple, cheap, and highly stable nanocarriers. This study investigated the effectiveness of using niosomes with their amphiphilic characteristics in the incorporation of both hydrophilic and hydrophobic anticancer drugs for CRC treatment. Methods: Drug-free niosomes were formulated using a response surface D-optimal factorial design to study the cholesterol molar ratio, surfactant molar ratio and surfactant type effect on the particle size and Z-potential of the prepared niosomes. After numerical and statistical optimization, an optimized formulation having a particle size of 194.4 ± 15.5 nm and a Z-potential of 31.8 ± 1.9 mV was selected to be loaded with Oxaliplatin and Paclitaxel separately in different concentrations. The formulations with the highest entrapment efficiency (EE%) were evaluated for their drug release using the dialysis bag method, in vitro antitumor activity on HT-29 colon cancer cell line and apoptosis activity. Results: Niosomes prepared using d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) at a molar ratio 4, cholesterol (2 molar ratio) and loaded with 1 molar ratio of either Oxaliplatin or Paclitaxel provided nanosized vesicles (278.5 ± 19.7 and 251.6 ± 18.1 nm) with a Z-potential value (32.7 ± 1.01 and 31.69 ± 0.98 mV) with the highest EE% (90.57 ± 2.05 and 93.51 ± 2.97) for Oxaliplatin and Paclitaxel, respectively. These formulations demonstrated up to 48 h drug release and increased the in vitro cytotoxicity and apoptosis efficiency of both drugs up to twice as much as free drugs. Conclusion: These findings suggest that different formulation composition parameters can be adjusted to obtain nanosized niosomal vesicles with an accepted Z-potential. These niosomes could be loaded with either hydrophilic drugs such as Oxaliplatin or hydrophobic drugs such as Paclitaxel. Drug-loaded niosomes, as a unique nanomicellar system, could enhance the cellular uptake of both drugs, resulting in enhanced cytotoxic and apoptosis effects against HT-29 colon cancer cells. Oxaliplatin–niosomes and Paclitaxel–niosomes can be considered promising alternative drug delivery systems with enhanced bioavailability of these two anticancer drugs for colorectal cancer treatment.

Protein release from nanocellulose and alginate hydrogels: The study of adsorption and desorption kinetics

This work presents a study of the lysozyme release from crosslinked TEMPO nanocellulose (TOCNF) and alginate (ALG) hydrogels in a medium with different ionic strength and temperature. The main objective is to develop a mathematical model for a detailed study of the concurrent action of diffusion mechanism and adsorption/desorption kinetics. Model fit parameters provide important information about the initial (maximum) adsorption rate and its deceleration with increasing ionic strength of the release medium. Similarly, the initial (minimum) desorption rate and its acceleration with increasing salt concentration can be determined. The model leads us to the conclusion that the initial adsorption rate is higher in the case of TOCNF, but due to fewer electrostatic interactions and morphology as well as topography of the surface, it decreases to a negligible value much faster than in the case of ALG, where the diffusion process becomes dominant.

Hypolipidemic Activity of Olive Oil-Based Nanostructured Lipid Carrier Containing Atorvastatin

Currently, hyperlipidemia is a growing health issue that is considered a risk factor for obesity. Controlling body weight and modifying life style in most of cases are not adequate and the condition requires medical treatment. Statin drugs (mainly Atorvastatin (ATO)), have been used broadly and for long time as medications for handling higher levels of lipid, especially bad cholesterol, which accordingly controls the prevalence of obesity. Still, the obstacle that stands in front of any formulation is the poor solubility of the drug. Low solubility of ATO came up with poor absorption as well as poor bioavailability. This paved the way for the present study, which aimed to exploit nanotechnology and develop certain nanolipid carriers that could accommodate hydrophobic drugs, such as ATO. Nanostructured lipid carrier (NLC) containing ATO was fabricated using olive oil. Olive oil is natural plant oil possessing confirmed hypolipidemic activity that would help in improving the efficacy of the formulation. Via applying the Quality by Design (QbD) approach, one NLC formula was selected to be optimized based on appropriate size and higher entrapment. Optimized ATO-NLC was scrutinized for zeta potential, in vitro study and kinetic profile. Moreover, stability testing and in vivo hypolipidemic behavior was conducted. The optimized NLC formulation seemed to show particle size (254.23 nm) with neutral zeta potential (−1.77 mV) and entrapment efficiency (69.56%). The formulation could be prolonged for 12 h and provided higher % of release (97.17%). Stability testing confirmed the role of modifying the surface of the formulation with PEG-DSPE in providing a highly stable formulation that could withstand three months storage in two altered conditions. Ultimately, optimized ATO-NLC could successfully lower total cholesterol level in rats induced with obesity and fed a high-fat diet. Remarkably, ATO-NLC prepared with olive oil, in addition to shielding its surface, would provide a stable formulation that holds up the synergistic action between olive oil and ATO.

Development of Statistically Optimized Chemically Cross-Linked Hydrogel for the Sustained-Release Delivery of Favipiravir

Nowadays, the use of statistical approaches, i.e., Box–Bhenken designs, are becoming very effective for developing and optimizing pharmaceutical drug formulations. In the current work, a Box–Bhenken design was employed using Design Expert version 11 to develop, evaluate, and optimize a hydrogel-based formulation for sustained release of an antiviral drug, i.e., favipiravir. The hydrogels were prepared using the free radical polymerization technique. β-Cyclodextrin (β-CD), N,N′-methylenebisacrylamide (MBA), acrylic acid (AA), and potassium per sulfate (KPS) were used as oligomer, crosslinker, monomer, and initiator, respectively. Three variables, including β-CD (X₁), MBA (X₂), and AA (X₃) were used at various concentrations for the preparation of hydrogels, followed by evaluation of a sol–gel fraction, swelling, porosity, chemical compatibilities, in vitro drug release, and entrapment efficiency. The results of the studies revealed that the degree of swelling was pH dependent, the best swelling being at pH 7.2 (1976%). On the other hand, for the low sol fraction of 0.2%, the reasonable porosity made the hydrogel capable of loading 99% favipiravir, despite its hydrophobic nature. The maximum entrapment efficiency (99%) was observed in optimized hydrogel formulation (F15). Similarly, in vitro drug release studies showed that the prepared hydrogels exhibited a good, sustained release effect till the 24th hour. The kinetic modelling of drug release data revealed that the Korsmeyer–Peppas model was best fit model, describing a diffusion type of drug release from the prepared hydrogels. Conclusively, the outcomes predict that the hydrogel-based system could be a good choice for developing a sustained-release, once-daily dosage form of favipiravir for improved patient compliance.

Biodegradable Carbonate Apatite Nanoparticle as a Delivery System to Promote Afatinib Delivery for Non-Small Cell Lung Cancer Treatment

Nanomedicine-based drug-delivery systems have significant interest in cancer treatment, such as improving the stabilities and biocompatibilities, precise targeting, and reducing toxicities for non-cancerous cells. Herein, this study presents the synthesis and characterisation of carbonate apatite nanoparticles (nCA) and encapsulated afatinib (AFA) as promising drug delivery candidates for lung cancer treatment. nCA/AFA was synthesised and physicochemically characterised, then the encapsulation capacity, drug loading, and cumulative drug release profile were evaluated. Powder X-ray diffraction (PXRD) confirmed that the synthesised nCA is apatite. Fourier-transform infrared spectroscopy (FTIR) results confirmed the drug loading into the nanoparticles. High-resolution transmission electron microscopy (HR-TEM) determined the morphology of nCA and nCA/AFA and the diameters of 47.36 ± 3.16 and 42.97 ± 2.78 nm, respectively, without an unaltered nCA phase. Encapsulation efficiency (%) and drug loading (%) were 55.08% ± 1.68% and 8.19% ± 0.52%. Brunauer-Emmett-Teller (BET) and dynamic light-scattering (DLS) results revealed that the synthesised nCA is mesoporous, with a surface area of 55.53 m2/g, and is negatively charged. Atomic force microscopy (AFM) showed increasing roughness of nCA/AFA compared to nCA. The drug release from the nano-formulation nCA/AFA demonstrated slow and sustained release compared to the pure drug. Accordingly, nCA/AFA represents a promising drug delivery system for NSCLC treatment.

Prevention of Ulcerative Colitis by Autologous Metabolite Transfer from Colitogenic Microbiota Treated with Lipid Nanoparticles Encapsulating an Anti-Inflammatory Drug Candidate

Modulating the gut microbiota composition is a potent approach to treat various chronic diseases, including obesity, metabolic syndrome, and ulcerative colitis (UC). However, the current methods, such as fecal microbiota transplantation, carry a risk of serious infections due to the transmission of multi-drug-resistant organisms. Here, we developed an organism-free strategy in which the gut microbiota is modulated ex vivo and microbiota-secreted metabolites are transferred back to the host. Using feces collected from the interleukin-10 (IL-10) knockout mouse model of chronic UC, we found that a drug candidate (M13)-loaded natural-lipid nanoparticle (M13/nLNP) modified the composition of the ex vivo-cultured inflamed gut microbiota and its secreted metabolites. Principal coordinate analysis (PCoA) showed that M13/nLNP shifted the inflamed microbiota composition toward the non-inflamed direction. This compositional modification induced significant changes in the chemical profiles of secreted metabolites, which proved to be anti-inflammatory against in vitro-cultured NF-κβ reporter cells. Further, when these metabolites were orally administered to mice, they established strong protection against the formation of chronic inflammation. Our study demonstrates that ex vivo modulation of microbiota using M13/nLNP effectively reshaped the microbial secreted metabolites and that oral transfer of these metabolites might be an effective and safe therapeutic approach for preventing chronic UC.

Triggered and controlled release of bioactives in food applications

Bioactive compounds (e.g., nutraceuticals, micronutrients, antimicrobial, antioxidant) are added to food products and formulations to enhance sensorial/nutritional attributes and/or shelf-life. Many of these bioactives are susceptible to degradation when exposed to environmental and processing factors. Others involve in undesirable interactions with food constituents. Encapsulation is a useful tool for addressing these issues through various stabilization mechanisms. Besides protection, another important requirement of encapsulation is to design a carrier that predictably releases the encapsulated bioactive at the target site to elicit its intended functionality. To this end, controlled release carrier systems derived from interactive materials have been developed and commercially exploited to meet the requirements of various applications. This chapter provides an overview on basic controlled and triggered release concepts relevant to food and active packaging applications. Different approaches to encapsulate bioactive compounds and their mode of release are presented, from simple blending with a compatible matrix to complex multiphase carrier systems. To further elucidate the mass transport processes, selected diffusion and empirical release kinetic models are presented, along with their brief historical significance. Finally, interactive carriers that are responsive to moisture, pH, thermal and chemical stimuli are presented to illustrate how these triggered release mechanisms can be useful for food applications.

Efficient dermal delivery of ascorbic acid 2-glucoside with photoacoustic waves

OBJECTIVE

Ascorbic acid (i.e., vitamin C) is an important antioxidant present in skin. The protective role of vitamin C against photoaging motivated numerous attempts to promote its topical delivery, with a success limited by its chemical instability and poor skin permeability. Vitamin C precursors, such as ascorbic acid 2-glucoside (AA2G), that are metabolized to vitamin C by enzymes present in the skin, solve the problem of stability but are limited by low skin permeability. We developed a 2% (w/v) gel formulation of AA2G application (viscosity 4.30 × 10⁴ Pa.s, pH 5.94) and compared its passive dermal delivery with the delivery promoted by photoacoustic waves that transiently perturb the skin barrier.

METHODS

Photoacoustic (PA) waves were generated by laser pulses absorbed by piezophotonic (light-to-pressure) transducers. Pig skin samples were exposed to the 2% AA2G formulation alone or combined with 5 minutes of PA waves. One hour later, AA2G was extracted from the skin and quantified by reverse-phase HPLC. AA2G transdermal fluxes using Franz cells with 760 μm thick pig skin samples were also measured.

RESULTS

PA waves transiently enhanced skin permeability and increased dermal delivery of AA2G. AA2G was released from the formulation nearly quantitatively (92.6 ± 6.2%) in 24 hours, showing a non-Fickian behaviour controlled by diffusion and swelling. AA2G dermal delivery with exposure for 5 minutes to PA waves was compared with passive delivery to pig skin. PA waves increased the delivery of AA2G to the skin by a factor of 15 fold with respect to passive delivery, as measured from skin extracts after 1 hour of contact of the formulation with the skin.

CONCLUSION

5 minutes of exposure to PA waves is a safe and effective method to deliver large quantities of AA2G to the skin.

Exorbitant Drug Loading of Metformin and Sitagliptin in Mucoadhesive Buccal Tablet: In Vitro and In Vivo Characterization in Healthy Volunteers

The aim of the proposed study is to develop a mucoadhesive buccal delivery system for the sustained delivery of metformin (MET) and sitagliptin (SIT) against diabetes mellitus (DM) with improved bioavailability. Polymeric blend of Carbopol® 940 (CP), agarose (AG) or polyvinylpyrrolidone K30 (PVP) as mucoadhesive agents in formulations (R1-R15) were compressed via the direct compression technique. Tablets were characterized for solid state studies, physicochemical and in vivo mucoadhesion studies in healthy volunteers. Outcomes did not reveal any unusual peak or interaction between the drugs and polymers in the physical mixture through Fourier Transform Infrared Spectroscopy (FTIR) and DSC analysis. The mucoadhesive blend of CP and PVP was superior compared to other blends. The formulation R4 revealed exorbitant loading of drugs with complete drug release for 6 h with ex vivo mucoadhesive strength and time of 26.99 g and 8.1 h, respectively. It was further scrutinized to evaluate it as an optimized formulation where it was found to be stable for up to 6 months. The formulation R4 depicted Korsmeyer-Peppas model and first-order mode of release correspondingly for SIT and MET. Moreover, it showed hemocompatibility, biocompatibility and stability with non-significant changes in the dissolution profile. Overall, the CP blend with PVP was found appropriate to yield the desired release coupled with the optimized mucoadhesive properties of the buccal tablets, ensuring sufficient pharmaceutical stability.

Simultaneous Release of Silver Ions and 10–Undecenoic Acid from Silver Iron–Oxide Nanoparticles Impregnated Membranes

The bio-medical benefits of silver ions and 10–undecenoic acid in various chemical-pharmaceutical preparations are indisputable, thus justifying numerous research studies on delayed and/or controlled release. This paper presents the effect of the polymer matrix in the simultaneous release of silver ions and 10–undecenoic acid in an aqueous medium of controlled pH and ionic strength. The study took into consideration polymeric matrices consisting of cellulose acetate (CA) and polysulfone (PSf), which were impregnated with oxide nanoparticles containing silver and 10–undecenoic acid. The studied oxide nanoparticles are nanoparticles of iron and silver oxides obtained by an accessible electrochemical method. The obtained results show that silver can be released, simultaneously with 10–undecenoic acid, from an impregnated polymeric membrane, at concentrations that ensure the biocidal and fungicidal capacity. Concentrations of active substances can be controlled by choosing the polymer matrix or, in some cases, by changing the pH of the target medium. In the studied case, higher concentrations of silver ions are released from the polysulfone matrix, while higher concentrations of 10–undecenoic acid are released from the cellulose acetate matrix. The results of the study show that a correlation can be established between the two released target substances, which is dependent on the solubility of the organic compound in the aqueous medium and the interaction of this compound with the silver ions. The ability of 10–undecenoic acid to interact with the silver ion, both through the carboxyl and alkene groups, contributes to the increase in the content of the silver ions transported in the aqueous medium.

Quantifying How Drug-Polymer Interaction and Volume Phase Transition Modulate the Drug Release Kinetics from Core-Shell Microgels

This paper presents a simple experimental-informed theory describing the drug release process from a temperature-responsive core-shell microgel. In stark contrast to the commonly employed power-law models, we couple electric, hydrophobic, and steric factors to characterize the impact of drug-polymer pair interaction on the release kinetics. To this end, we also propose a characteristic time, depicting the drug release process as an interplay between kinetics and thermodynamics. In some instances, the negative correlation between the diffusivity and the (thermodynamics) drug-polymer interaction renders the drug release time non-trivial. In conclusion, our theory establishes a mechanistic understanding of the drug release process, exploring the effect of (hydrophobic adhesion) attractive and (steric exclusion) repulsive pair interactions between the drugs and the microgel in the presence of temperature-induced volume phase transition.

Craft of Co-encapsulation in Nanomedicine: A Struggle To Achieve Synergy through Reciprocity

Achieving synergism, often by combination therapy via codelivery of chemotherapeutic agents, remains the mainstay of treating multidrug-resistance cases in cancer and microbial strains. With a typical core-shell architecture and surface functionalization to ensure facilitated targeting of tissues, nanocarriers are emerging as a promising platform toward gaining such synergism. Co-encapsulation of disparate theranostic agents in nanocarriers-from chemotherapeutic molecules to imaging or photothermal modalities-can not only address the issue of protecting the labile drug payload from a hostile biochemical environment but may also ensure optimized drug release as a mainstay of synergistic effect. However, the fate of co-encapsulated molecules, influenced by temporospatial proximity, remains unpredictable and marred with events with deleterious impact on therapeutic efficacy, including molecular rearrangement, aggregation, and denaturation. Thus, more than just an art of confining multiple therapeutics into a 3D nanoscale space, a co-encapsulated nanocarrier, while aiming for synergism, should strive toward achieving a harmonious cohabitation of the encapsulated molecules that, despite proximity and opportunities for interaction, remain innocuous toward each other and ensure molecular integrity. This account will inspect the current progress in co-encapsulation in nanocarriers and distill out the key points toward accomplishing such synergism through reciprocity.

Synthesis of Chemically Cross-Linked pH-Sensitive Hydrogels for the Sustained Delivery of Ezetimibe

In recent years, pH-sensitive hydrogels have been developed for the delivery of therapeutic agents to specific target sites that have a defined pH range. The use of pH-responsive polymers in hydrogels allows drug delivery to the desired pH range of the target organ. The primary aim is to increase the retention time of the drug in the small intestine by utilizing the swelling mechanism of the hydrogel at intestinal pH. In this study, polyethylene glycol (PEG) was used as a polymer to formulate a pH-sensitive hydrogel of Ezetimibe to deliver the drug to the small intestine where it inhibits the absorption of cholesterol. Design Expert software was applied to design and optimize the trial formulations in order to obtain an optimized formulation that has all the desired characteristics of the hydrogels. The PEG/Acrylic Acid hydrogels showed the maximum swelling at pH 6.8, which is consistent with the pH of the small intestine (pH 6–7.4). The maximum entrapment efficiency of the hydrogels was 99%. The hydrogel released 80–90% of the drug within 24 h and followed first-order release kinetics, which showed that the release from the drug was sustained. Hence, the results showed that the choice of a suitable polymer can lead to the development of an efficient drug-loaded hydrogel that can deliver the drug at the specific pH of the target organ.

Formulation design and optimization of cationic-charged liposomes of brimonidine tartrate for effective ocular drug delivery by Design of Experiment (DoE) approach

OBJECTIVE

The present study was aimed to design and optimize brimonidine tartrate (BRT) loaded cationic-charged liposome formulation with enhanced trans-corneal drug permeation, prolonged corneal residence, and sustained drug release for effective ocular delivery.

METHODS

Design of experiment (DoE) based formulation optimization was done by 3-factor, 3-level Box-Behnken design selecting lipid, cholesterol, and drug content as independent variables and particle size (PS), PDI, zeta potential (ZP), entrapment efficiency (EE%), and cumulative % drug release (CDR) as response variables. The optimized formulation consisting of 79.2 mM lipid, 36.2 mM cholesterol, and 15.8 mg/ml drug was prepared by thin film hydration-sonication method using EPCS:DOTAP(1:1) as lipid component and characterized for all desired critical quality attributes (CQAs), drug release kinetics, TEM, DSC, XRD analysis, ex-vivo trans-corneal drug permeation, and physical stability studies.

RESULTS

The optimized liposome formulation exhibited experimentally observed responses close to predicted values having 150.4 nm (PS), 0.203 (PDI), 30.62 mV (ZP), and 55.17% (EE). The observed CDR(%) was 36.15% at 1h and 91.13% at 12h exhibiting sustained drug release profile and followed Higuchi drug release kinetics. The TEM, DSC, and XRD studies revealed spherical, nanosized, small unilamellar vesicles effectively entrapping BRT in liposomes. The ex-vivo permeation study across goat cornea recorded apparent permeability (P_app) 1.011 ± 0.07 cm.min^-1 and steady-state flux (J_ss) 17.63 ± 1.22 µg.cm^-2.min^-1 showing >2 fold enhanced drug permeation as compared to BRT solution.

CONCLUSION

The developed liposomal formulation possessed all recommended CQAs in optimal range with enhanced trans-corneal drug permeation and remained physically stable in 3 months stability study.

An Integrative QbD Approach for the Development and Optimization of Controlled Release Compressed Coated Formulation of Water-Soluble Drugs

Controlled release dosage forms maintain regulated pharmacokinetic profile of drug substance within its therapeutic window by ensuring constant plasma concentrations. Controlled release formulations not only increase the therapeutic efficacy of drug substances but also reduce their dose-related side effects. Present investigation was conducted to develop, optimize, and validate compressed coated controlled release tablet formulation for highly water-soluble drug substances which have no rate-controlling factor towards its release from dosage form. Drug dispersed waxy core tablet, press coated within the swellable hydrophilic polymeric barrier layer, was developed and optimized via quality by design approach (QbD) using Box-Behnken design. The optimized formulation was characterized and validated using in vitro quality control parameters. Attributes identified under SUPAC guidelines, such as drug release rates at 30 min, 6 h, and 12 h, were considered as the critical quality attributes (CQAs) that significantly affected efficiency of the compressed coated controlled release tablets. CQAs screened using risk assessment and Pareto chart analyses were used for optimizing controlled release dosage form. Findings revealed that tablets containing drug to wax ratio of 1:1, hydrophilic swellable polymer concentration of 200 mg, and prepared using compression pressure of 6.5 kg/cm² exhibited the highest desirability indices in terms of controlling the release rate of drug substance. Optimized formulation was also evaluated for swelling rate, erosion rate, and other post-compression parameters, including release kinetics. Fickian diffusion-based zero-order controlled release of BCS class I drug substance was achieved through the developed dosage form.

β-Lactoglobulin-Modified Mesoporous Silica Nanoparticles: A Promising Carrier for the Targeted Delivery of Fenbendazole into Prostate Cancer Cells

The clinical utilization of fenbendazole (FBZ) as a potential anticancer drug has been limited due to its low water solubility, which causes its low bioavailability. The development of a drug nanoformulation that includes the solubilizing agent as a drug carrier can improve solubility and bioavailability. In this study, Mobil Composition of Matter Number 48 (MCM-48) nanoparticles were synthesized and functionalized with succinylated β-lactoglobulin (BLG) to prevent early-burst drug release. The BLG-modified amine-functionalized MCM-48 (MCM-BLG) nanoparticles were loaded with FBZ to produce the drug nanoformulation (FBZ-MCM-BLG) and improved the water solubility and, consequently, its anticancer effects against human prostate cancer PC-3 cells. The prepared FBZ-MCM-BLG was characterized in terms of size, zeta potential, drug loading capacity, morphology, thermal and chemical analyses, drug release, cellular uptake, cell viability, cell proliferation, production of reactive oxygen species (ROS), and cell migration. The results demonstrated that the FBZ-MCM-BLG nanoparticles have a spherical morphology with a size and zeta potential of 369 ± 28 nm and 28 ± 0.4 mV, respectively. The drug loading efficiency of the new nanoformulation was 19%. The release of FBZ was pH-dependent; a maximum cumulative release of about 76 and 62% in 12 h and a burst release of 53 and 38% in the first 0.5 h was observed at pH 1.2 and 6.8, respectively. The prepared FBZ-MCM-BLG formulation demonstrated higher cytotoxicity effects against PC-3 cells by 5.6- and 1.8-fold, respectively, when compared to FBZ and FBZ-MCM nanoparticles. The new formulation also increased the production of ROS by 1.6- and 1.2-fold and inhibited the migration of PC-3 cells when compared to the FBZ and FBZ-MCM nanoparticles, respectively. Overall, FBZ-MCM-BLG nanoparticles improved FBZ delivery to PC-3 cells and have the potential to be evaluated for the treatment of prostate cancer following a comprehensive in vivo study.

Recent Fabrication Methods to Produce Polymer-Based Drug Delivery Matrices (Experimental and In Silico Approaches)

The study of novel drug delivery systems represents one of the frontiers of the biomedical research area. Multi-disciplinary scientific approaches combining traditional or engineered technologies are used to provide major advances in improving drug bioavailability, rate of release, cell/tissue specificity and therapeutic index. Biodegradable and bio-absorbable polymers are usually the building blocks of these systems, and their copolymers are employed to create delivery components. For example, poly (lactic acid) or poly (glycolic acid) are often used as bricks for the production drug-based delivery systems as polymeric microparticles (MPs) or micron-scale needles. To avoid time-consuming empirical approaches for the optimization of these formulations, in silico-supported models have been developed. These methods can predict and tune the release of different drugs starting from designed combinations. Starting from these considerations, this review has the aim of investigating recent approaches to the production of polymeric carriers and the combination of in silico and experimental methods as promising platforms in the biomedical field.

Evaluation and Optimization of Prolonged Release Mucoadhesive Tablets of Dexamethasone for Wound Healing: In Vitro–In Vivo Profiling in Healthy Volunteers

The aim of the projected study was to design and develop a novel strategy for evaluating the mucoadhesive potential of polymeric tablets of dexamethasone (DXM) for local delivery against wounds. Therefore, formulations (Q1–Q7) were synthesized via direct compression method by varying the concentrations of polymers, i.e., ethyl cellulose (EC) and agar extract (AG). Moreover, the mucoadhesive polymeric tablets were characterized via physicochemical, in vitro, ex vivo and in vivo experiments. However, physicochemical characteristics such as FTIR showed no interaction with different polymeric combination. Surface pH of all formulations was normal to slightly alkaline. Highest hydration of up to 6.22% and swelling index was comprehended with maximum concentration of AG (50% of total tablet weight). Whereas, ex vivo and in vivo residence time and mucoadhesion were attributed to the increased concentrations of polymers. Moreover, Q7, (optimized formulation), containing 10% of EC and 40% of AG, exhibited maximum release of DXM (100%) over 8 h, along with sufficient mucoadhesive strength up to 11.73 g, following first-order kinetics having r² value of 0.9778. Hemostatic effects and epithelialization for triggering and promoting wound healing were highly pronounced in cases of Q7. Furthermore, in vivo residence time was 7.84 h followed by salivary drug concentration (4.2 µg/mL). However, mucoadhesive buccal tablets showed stability for 6 months, thus following the standardization (ICH-Iva) stability zone. In summary, DXM mucoadhesive tablets seem to be an ideal candidate for eradication of wound infections via local targeted delivery.

Using Chitosan-Coated Polymeric Nanoparticles-Thermosensitive Hydrogels in association with Limonene as Skin Drug Delivery Strategy

Topical delivery of local anesthetics (LAs) is commonly used to decrease painful sensations, block pain throughout procedures, and alleviate pain after surgery. Dermal and/or transdermal delivery of LAs has other advantages, such as sustained drug delivery and decreased systemic adverse effects. This study reports the development of poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles coated with chitosan for the sustained release and topicality of benzocaine (BZC) and topical delivery. BZC PLGA nanoparticles or nonencapsulated drugs were further incorporated into Poloxamer hydrogels (Pluronic™ F-127). The nanoparticles showed a mean diameter of 380 ± 4 nm, positive zeta potential after coating with chitosan (23.3 ± 1.7 mV), and high encapsulation efficiency (96.7 ± 0.02%). Cellular viability greater than 70% for both fibroblasts and keratinocytes was observed after treatment with nanoparticles, which is in accordance with the preconized guidelines for biomedical devices and delivery systems. Both the nanoparticles and hydrogels were able to modulate BZC delivery and increase drug permeation when compared to the nonencapsulated drug. Furthermore, the incorporation of limonene into hydrogels containing BZC-loaded nanoparticles increased the BZC permeation rates. Non-Newtonian and pseudoplastic behaviors were observed for all hydrogel nanoformulations with or without nanoparticles. These results demonstrate that the hydrogel-nanoparticle hybrids could be a promising delivery system for prolonged local anesthetic therapy.

Mucoadhesive PLGA Nanospheres and Nanocapsules for Lactoferrin Controlled Ocular Delivery

Background: the present work describes the preparation, characterization and optimization of eight types of PLGA-based nanosystems (nanospheres and nanocapsules) as innovative mucoadhesive drug delivery systems of lactoferrin, in order to achieve a preclinical consistent base as an alternative pharmacological treatment to different ocular syndromes and diseases. Methods: All different nanoparticles were prepared via two modified nanoprecipitation techniques, using a three-component mixture of drug/polymer/surfactant (Lf/PLGA/Poloxamer), as a way to overcome the inherent limitations of conventional PLGA NPs. These modified polymeric nanocarriers, intended for topical ophthalmic administration, were subjected to in vitro characterization, surface modification and in vitro and in vivo assessments. Results: An appropriate size range, uniform size distribution and negative ζ potential values were obtained for all types of formulations. Lactoferrin could be effectively included into all types of nanoparticles with appropriate encapsulation efficiency and loading capacity values. A greater, extended, and controlled delivery of Lf from the polymeric matrix was observed through the in vitro release studies. No instability or cytotoxicity was proved for all the formulations by means of organotypic models. Additionally, mucoadhesive in vitro and in vivo experiments show a significant increase in the residence time of the nanoparticles in the eye surface. Conclusions: all types of prepared PLGA nanoparticles might be a potential alternative for the topical ophthalmic administration of lactoferrin.

Synthesis and Characterization of Pyrazole-Enriched Cationic Nanoparticles as New Promising Antibacterial Agent by Mutual Cooperation

A pyrazole derivative (CB1) was previously evaluated in vivo for various pharmacological activities (with the exception of antimicrobial effects), using DMSO as the administrative medium, mainly due to its water insolubility. Considering the global necessity for new antimicrobial agents, CB1 attracted our attention as a candidate to meet this need, mainly because the secondary amine group in its structure would make it possible to obtain its hydrochloride salt (CB1H), thus effortlessly solving its water-solubility drawbacks. In preliminary microbiologic investigations on Gram-negative and Gram-positive bacteria, CB1H displayed weak antibacterial effects on MDR isolates of Gram-positive species, nonetheless better than those displayed by the commonly-used available antibiotics. Therefore, aiming at improving such activity and extending the antibacterial spectrum of CB1H to Gram-negative pathogens, in this first work CB1 was strategically formulated in nanoparticles using a cationic copolymer (P7) previously developed by us, possessing potent broad-spectrum bactericidal activity. Using the nanoprecipitation method, CB1H-loaded polymer nanoparticles (CB1H-P7 NPs) were obtained, which were analyzed by attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy to confirm the successful loading. Additionally, CB1H-P7 NPs were fully characterized in terms of morphology, size, polydispersity indices, surface charge, DL%, and EE%, as well as release and potentiometric profiles.

Modeling the diffusion-erosion crossover dynamics in drug release

A computational model is proposed to investigate drug delivery systems in which erosion and diffusion mechanisms are participating in the drug release process. Our approach allowed us to analytically estimate the crossover point between those mechanisms through the value of the parameter b (b_{c}=1) and the scaling behavior of parameter τ on the Weibull function, exp[-(t/τ)^{b}], used to adjust drug release data in pharmaceutical literature. Numerical investigations on the size dependence of the characteristic release time τ found it to satisfy either linear or quadratic scaling relations on either erosive or diffusive regimes. Along the crossover, the characteristic time scales with the average coefficient observed on the extreme regimes (i.e., τ∼L^{3/2}), and we show that this result can be derived analytically by assuming an Arrhenius relation for the diffusion coefficient inside the capsule. Based on these relations, a phenomenological expression for the characteristic release in terms of size L and erosion rate κ is proposed, which can be useful for predicting the crossover erosion rate κ_{c}. We applied this relation to the experimental literature data for the release of acetaminophen immersed in a wax matrix and found them to be consistent with our numerical results.

Drug diffusion and release from a bioerodible spherical capsule

Controlled release of a drug contained in a spherical polymer capsule is of significant interest in many fields of medicine. There is growing interest in tailoring the erosion properties of the drug to help control and optimize the drug release process. Theoretical understanding of the nature of drug release from a bioerodible capsule is, therefore, important for designing effective drug delivery systems. While drug release from a fixed-radius capsule is relatively easier to model, the shrinking nature of a bioerodible capsule due to surface erosion presents several difficulties in theoretical modeling. This work presents a closed-form solution for the drug concentration distribution and drug delivery characteristics from a spherical capsule undergoing linear surface erosion. This problem is solved by a transformation that converts the moving boundary problem into a fixed boundary problem. For uniform initial drug distribution, the solution is shown to depend on a single non-dimensional parameter. The theoretical model is used to develop an understanding of the impact of varying the drug diffusion coefficient and rate of erosion on drug delivery characteristics. It is found that, in general, the nature of drug release in a bioerodible sphere is determined by a delicate balance between two simultaneously occurring processes - erosion and diffusion. This work improves the theoretical understanding of diffusion in drug delivery systems by accounting for the practical erosion phenomena, and may contribute towards the design and optimization of drug delivery systems.

Two Beats One: Osteosarcoma Therapy with Light-Activated and Chemo-Releasing Keratin Nanoformulation in a Preclinical Mouse Model

Osteosarcoma treatment is moving towards more effective combination therapies. Nevertheless, these approaches present distinctive challenges that can complicate the clinical translation, such as increased toxicity and multi-drug resistance. Drug co-encapsulation within a nanoparticle formulation can overcome these challenges and improve the therapeutic index. We previously synthetized keratin nanoparticles functionalized with Chlorin-e6 (Ce6) and paclitaxel (PTX) to combine photo (PDT) and chemotherapy (PTX) regimens, and the inhibition of osteosarcoma cells growth in vitro was demonstrated. In the current study, we generated an orthotopic osteosarcoma murine model for the preclinical evaluation of our combination therapy. To achieve maximum reproducibility, we systematically established key parameters, such as the number of cells to generate the tumor, the nanoparticles dose, the design of the light-delivery device, the treatment schedule, and the irradiation settings. A 60% engrafting rate was obtained using 10 million OS cells inoculated intratibial, with the tumor model recapitulating the histological hallmarks of the human counterpart. By scheduling the treatment as two cycles of injections, a 32% tumor reduction was obtained with PTX mono-therapy and a 78% reduction with the combined PTX-PDT therapy. Our findings provide the in vivo proof of concept for the subsequent clinical development of a combination therapy to fight osteosarcoma.

K, Pilaquinga F, Kumar B, Debut A. Comparative statistical analysis of the release kinetics models for nanoprecipitated drug delivery systems based on poly(lactic-co-glycolic acid)

Poly(lactic-co-glycolic acid) is one of the most used polymers for drug delivery systems (DDSs). It shows excellent biocompatibility, biodegradability, and allows spatio-temporal control of the release of a drug by altering its chemistry. In spite of this, few formulations have reached the market. To characterize and optimize the drug release process, mathematical models offer a good alternative as they allow interpreting and predicting experimental findings, saving time and money. However, there is no general model that describes all types of drug release of polymeric DDSs. This study aims to perform a statistical comparison of several mathematical models commonly used in order to find which of them best describes the drug release profile from PLGA particles synthesized by nanoprecipitation method. For this purpose, 40 datasets extracted from scientific articles published since 2016 were collected. Each set was fitted by the models: order zero to fifth order polynomials, Korsmeyer-Peppas, Weibull and Hyperbolic Tangent Function. Some data sets had few observations that do not allow to apply statistic test, thus bootstrap resampling technique was performed. Statistic evidence showed that Hyperbolic Tangent Function model is the one that best fit most of the data.

Considerations on the Controlled Delivery of Bioactive Compounds through Hyaluronic Acid Membrane

(1) Background: The standard treatment for periodontal disease, a chronic inflammatory state caused by the interaction between biofilms generated by organized oral bacteria and the local host defense response, consists of calculus and biofilm removal through mechanical debridement, associated with antimicrobial therapy that could be delivered either systemically or locally. The present study aimed to determine the effectiveness of a hyaluronic acid membrane matrix as a carrier for the controlled release of the active compounds of a formulation proposed as a topical treatment for periodontal disease, and the influence of pH on the complex system’s stability. (2) Methods: The obtained hyaluronic acid (HA) hydrogel membrane with dispersed melatonin (MEL), metronidazole (MZ), and tetracycline (T) was completely characterized through FTIR, XRD, thermal analysis, UV-Vis and fluorescence spectroscopy, fluorescence microscopy, zeta potential and dielectric analysis. The MTT viability test was applied to check the cytotoxicity of the obtained membranes, while the microbiological assessment was performed against strains of Staphylococcus spp. and Streptococcus spp. The spectrophotometric investigations allowed to follow up the release profile from the HA matrix for MEL, MZ, and T present in the topical treatment considered. We studied the behavior of the active compounds against the pH of the generated environment, and the release profile of the bioactive formulation based on the specific comportment towards pH variation. The controlled delivery of the bioactive compounds using HA as a supportive matrix was modeled applying Korsmeyer–Peppas, Higuchi, first-order kinetic models, and a newly proposed pseudo-first-order kinetic model. (3) Results: It was observed that MZ and T were released at higher active concentrations than MEL when the pH was increased from 6.75, specific for patients with periodontitis, to a pH of 7.10, characterizing the healthy patients. Additionally, it was shown that for MZ, there is a burst delivery up to 2.40 × 10⁻⁵ mol/L followed by a release decrease, while for MEL and T a short release plateau was recorded up to a concentration of 1.80 × 10⁻⁵ mol/L for MEL and 0.90 × 10⁻⁵ mol/L for T, followed by a continuous release; (4) Conclusions: The results are encouraging for the usage of the HA membrane matrix as releasing vehicle for the active components of the proposed topical treatment at a physiological pH.

Synthesis and characterization of new functionalized chitosan and its antimicrobial and in-vitro release behavior from topical gel

Recently, chitosan and its derivatives have been gaining more attention due to their high integration into various biomedical applications. Herein, a new chitosan derivative was prepared by linking the chitosan (Cs) with a novel heterocyclic compound, Benzoimidazolyl-thiadiazole (BzimTD) to form Cs-BzimTD. The synthesis of the new chitosan derivative was confirmed by Fourier-Transform Infrared (FT-IR) spectroscopy, proton nuclear magnetic resonance (¹H NMR), thermogravimetric (TGA-DTG) analysis, elemental analysis, and UV-Visible spectrophotometer. Data showed the high efficacy of functionalized Cs-BzimTD to inhibit the growth of pathogenic microbes, Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans, with inhibition zones of 15.3 ± 0.6 - 9.2 ± 0.3 mm. Also, Cs-BzimTD was applied in a topical gel formulation by using two different polymers, Carbopol 940 (CP) and Carboxymethyl Cellulose (CMC) to form three gel formulations: Cs-BzimTD-CP, Cs-BzimTD-CMC, and Cs-BzimTD-CP-CMC. The new gels were checked for physical appearance, viscosity, Cs-BzimTD release, pH, spread-ability, and drug content. The results showed that all formulations were clear, transparent, and homogeneous with non-irritant pH values for skin (6.4 - 6.8). The spread-ability was found in the range of 7.1 - 9.4 g.cm/s. The Cs-BzimTD-CP formula showed the maximal Cs-BzimTD content percentage (86.5%) and the Cs-BzimTD release varied from 89.9 to 81.6% after 8 h depending on the gel formulation, with a maximum release achieved for Cs-BzimTD-CMC.

Formulation and in-vitro characterization of fast-disintegrating herbal extract sublingual immunotherapy tablet for peanut-induced allergic asthma

Background

Allergen immunotherapy (AIT) involves the regimen of gradually incrementing doses of the allergen, thereby inducing desensitization and tolerance. Sublingual Immunotherapy tablets (SLIT-tablets) have been formulated for several allergies and had manifested efficacy for allergic rhinitis and allergic asthma. SLIT promises an alternative method to other routes of AIT enabling patients to self-administer AIT.

Objective

The study aimed to formulate fast disintegrating SLIT containing crude peanut extract for peanut-induced allergic asthma.

Methods

The crude peanut extract was prepared by a simple extraction method and was subjected to quantitative and qualitative analysis. The extract was also characterised for its physical properties. The preformulation study for the extract and excipients of the tablet was performed using FT-IR spectroscopy and Differential scanning calorimetry. The tablet powder blends were characterised for pre-compression properties. The SLIT tablets were developed by direct compression and the post-compression evaluation was performed.

Results

The results of the quantitative and qualitative analysis of extract confirmed the presence of peanut proteins in the extract. The preformulation studies using FT-IR spectroscopy and Differential Scanning Calorimetry revealed that there is no significant interaction between the CPE and excipients. The pre-compression characterisation showed that the powder blends had good flowproperties. Three doses of SLIT tablets were formulated with each dose containing four batches and the tablet of each dose was optimized by studying the effect of varying concentrations of super disintegrants on disintegration time and dissolution rate. The post compression characterization of the tablets was performed and the optimized batch of the three doses with the concentration of 5% crospovidone and 2% croscarmellose sodium showed less wetting time and high-water absorption ratio, shorter disintegration time of 14secs and maximum drug release of >90% within 2-3 min.

Conclusion

The results indicated the suitability of formulated SLIT tablets for peanut induced allergic asthma.