The materials science of collagen

Mimicking Hierarchical Complexity of the Osteochondral Interface Using Electrospun Silk-Bioactive Glass Composites

The anatomical complexity and slow regeneration capacity of hyaline cartilage at the osteochondral interface pose a great challenge in the repair of osteochondral defects (OCD). In this study, we utilized the processing feasibility offered by the sol derived 70S bioactive glass and silk fibroin (mulberry Bombyx mori and endemic Indian non-mulberry Antheraea assama), in fabricating a well-integrated, biomimetic scaffolding matrix with a coherent interface. Differences in surface properties such as wettability and amorphousness between the two silk groups resulted in profound variations in cell attachment and extracellular matrix protein deposition. Mechanical assessment showed that the biphasic composites exhibited both an elastic region pertinent for cartilage tissue and a stiff compression resistant region simulating the bone phase. In vitro biological studies revealed that the biphasic mats presented spatial confinement for the growth and maturation of both osteoblasts and chondrocytes, marked by increased alkaline phosphatase (ALP) activity, osteopontin (OPN), sulfated glycosaminoglycan (sGAG) and collagen secretion in the cocultured mats. The non-mulberry silk based biphasic composite mats performed better than their mulberry counterpart, as evidenced by enhanced expression levels of key cartilage and bone specific marker genes. Therefore, the developed biphasic scaffold show great promise for improving the current clinical strategies for osteochondral tissue repair.

Loss of stat3 function leads to spine malformation and immune disorder in zebrafish

STAT (Signal Transducers and Activators of Transcription) gene family members have been revealed to be involved in cell growth and differentiation in vertebrates. Despite their physiological importance, their functions are poorly studied at organ and systemic levels. In this study, we performed a genome-wide analysis using data from invertebrates to vertebrates to identify STAT genes and analyze their evolutionary history. Interestingly, the STAT gene family undergoes genome duplications during the evolutionary history with STAT3 homologues firstly appearing in the basal extant vertebrate, sea lamprey, suggesting its possible roles in spine formation. To investigate the functions of stat3 in fish species, TALEN technology was performed to generate mutant zebrafish lines. Stat3 mutant zebrafish showed no obvious defects at early developmental stage but displayed severe lateral and vertical curvature of the spine (scoliosis), spine fracture and the incomplete bone joints with narrower junction between vertebrae at early juvenile stage, as indicated by Alizarin red and Alcian blue staining, radiography and micro-computed tomography (MicroCT) analysis. Transcriptome analysis reveals dramatic alterations in a number of genes involved in immune and infection response, skeletal development and somatic growth, especially downregulated expression of collagen gene family, in the juvenile stat3 mutant zebrafish. Moreover, most of the collagen genes were detected to have abnormal expression pattern during the formation of spine deformities in stat3 mutants. Our data reveal that stat3 is specially expressed in vertebrates and required for normal spine development and immune function in zebrafish.

Fundamentals of protein and cell interactions in biomaterials

The extracellular matrix (ECM) is an active and complex microenvironment with outstanding biomechanical, biophysical, and biochemical characteristics, which can indirectly or directly controls cell adhesion, migration, proliferation, and differentiation, as well as partaking in regeneration and homeostasis of organs and tissues. The ECM has captivated a great deal of attention with the rapid progress of tissue engineering (TE) in the field of regenerative medicine (RM). Approaches to TE, RM and cancer therapy center on the necessity to deliver cell signals to direct cell proliferation and differentiation. These "external signals" are induced from cell-cell, and cell-ECM, interactions, as well as from physico-chemical, mechanical stimuli and growth factors. With the advent of new biomaterials such as casein, we gave a general insight into cell-ECM protein interactions in biomaterials and their applications in TE, RM and cancer therapy. An account of the main ECM molecules and cellular receptors with emphasis on integrins and its ligands was given, their effect on the induction of particular signal transduction pathways is also elucidated.

Tumor necrosis factor-α and transforming growth factor-β1 facilitate differentiation and proliferation of tendon-derived stem cells in vitro

OBJECTIVES

To investigate the effects of tumor necrosis factor-α (TNF-α) and transforming growth factor-β1 (TGF-β1) on the proliferation and differentiation of tendon-derived stem cells (TDSC).

RESULTS

TNF-α inhibits the proliferation and tenogenic/osteogenic differentiation of TDSC but, after simultaneous or sequential treatment with TGF-β1 and TNF-α, the expression of tenogenic/osteogenic-related marker and proliferation of TDSC was significantly increased. During these processes, Smad2/3 and Smad1/5/8 were highly phosphorylated, meaning that the TGF-β and BMP signaling pathways were highly activated. Further study revealed that the expression of Inhibitor-Smad appeared to be negatively correlated to the proliferation and differentiation of TDSC.

CONCLUSIONS

Combining the use of TNF-α and TGF-β1 could improve the proliferation and differentiation of TDSC in vitro, and the expression of I-Smad is negatively correlated with TDSC proliferation and differentiation.

Unraveling capillary interaction and viscoelastic response in atomic force microscopy of hydrated collagen fibrils

The mechanical properties of collagen fibrils depend on the amount and the distribution of water molecules within the fibrils. Here, we use atomic force microscopy (AFM) to study the effect of hydration on the viscoelastic properties of reconstituted type I collagen fibrils in air with controlled relative humidity. With the same AFM tip, we investigate the same area of a collagen fibril with two different force spectroscopy methods: force-distance (FD) and amplitude-phase-distance (APD) measurements. This allows us to separate the contributions of the fibril's viscoelastic response and the capillary force to the tip-sample interaction. A water bridge forms between the tip apex and the surface, causing an attractive capillary force, which is the main contribution to the energy dissipated from the tip to the specimen in dynamic AFM. The force hysteresis in the FD measurements and the tip indentation of only 2 nm in the APD measurements show that the hydrated collagen fibril is a viscoelastic solid. The mechanical properties of the gap regions and the overlap regions in the fibril's D-band pattern differ only in the top 2 nm but not in the fibril's bulk. We attribute this to the reduced number of intermolecular crosslinks in the reconstituted collagen fibril. The presented methodology allows the mechanical surface properties of hydrated collagenous tissues and biomaterials to be studied with unprecedented detail on the nanometer scale.

Molecular Mechanisms of Stress-Responsive Changes in Collagen and Elastin Networks in Skin

Collagen and elastin networks make up the majority of the extracellular matrix in many organs, such as the skin. The mechanisms which are involved in the maintenance of homeostatic equilibrium of these networks are numerous, involving the regulation of genetic expression, growth factor secretion, signalling pathways, secondary messaging systems, and ion channel activity. However, many factors are capable of disrupting these pathways, which leads to an imbalance of homeostatic equilibrium. Ultimately, this leads to changes in the physical nature of skin, both functionally and cosmetically. Although various factors have been identified, including carcinogenesis, ultraviolet exposure, and mechanical stretching of skin, it was discovered that many of them affect similar components of regulatory pathways, such as fibroblasts, lysyl oxidase, and fibronectin. Additionally, it was discovered that the various regulatory pathways intersect with each other at various stages instead of working independently of each other. This review paper proposes a model which elucidates how these molecular pathways intersect with one another, and how various internal and external factors can disrupt these pathways, ultimately leading to a disruption in collagen and elastin networks.

Internal strain drives spontaneous periodic buckling in collagen and regulates remodeling

Fibrillar collagen, an essential structural component of the extracellular matrix, is remarkably resistant to proteolysis, requiring specialized matrix metalloproteinases (MMPs) to initiate its remodeling. In the context of native fibrils, remodeling is poorly understood; MMPs have limited access to cleavage sites and are inhibited by tension on the fibril. Here, single-molecule recordings of fluorescently labeled MMPs reveal cleavage-vulnerable binding regions arrayed periodically at ∼1-µm intervals along collagen fibrils. Binding regions remain periodic even as they migrate on the fibril, indicating a collective process of thermally activated and self-healing defect formation. An internal strain relief model involving reversible structural rearrangements quantitatively reproduces the observed spatial patterning and fluctuations of defects and provides a mechanism for tension-dependent stabilization of fibrillar collagen. This work identifies internal-strain-driven defects that may have general and widespread regulatory functions in self-assembled biological filaments.

Adhesion of human gingival fibroblasts/Streptococcus mitis co-culture on the nanocomposite system Chitlac-nAg

Composite materials are increasingly used as dental restoration. In the field of biomaterials, infections remain the main reason of dental devices failure. Silver, in the form of nanoparticles (AgNPs), ions and salt, well known for its antimicrobial properties, is used in several medical applications in order to avoid bacterial infection. To reduce both bacterial adhesion to dental devices and cytotoxicity against eukaryotic cells, we coated BisGMA/TEGDMA methacrylic thermosets with a new material, Chitlac-nAg, formed by stabilized AgNPs with a polyelectrolyte solution containing Chitlac. Here we analyzed the proliferative and adhesive ability of human gingival fibroblasts (HGFs) on BisGMA/TEGDMA thermosets uncoated and coated with AgNPs in a coculture model system with Streptococcus mitis. After 48 h, HGFs well adhered onto both surfaces, while S. mitis cytotoxic response was higher in the presence of AgNPs coated thermosets. After 24 h thermosets coated with Chitlac as well as those coated with Chitlac-nAg exerted a minimal cytotoxic effect on HGFs, while after 48 h LDH release raised up to 20 %. Moreover the presence of S. mitis reduced this release mainly when HGFs adhered to Chitlac-nAg coated thermosets. The reduced secretion of collagen type I was significant in the presence of both surfaces with the co-culture system even more when saliva is added. Integrin β1 localized closely to cell membranes onto Chitlac-nAg thermosets and PKCα translocated into nuclei. These data confirm that Chitlac-nAg have a promising utilization in the field of restorative dentistry exerting their antimicrobial activity due to AgNPs without cytotoxicity for eukaryotic cells.

Structural Design Elements in Biological Materials: Application to Bioinspiration

Eight structural elements in biological materials are identified as the most common amongst a variety of animal taxa. These are proposed as a new paradigm in the field of biological materials science as they can serve as a toolbox for rationalizing the complex mechanical behavior of structural biological materials and for systematizing the development of bioinspired designs for structural applications. They are employed to improve the mechanical properties, namely strength, wear resistance, stiffness, flexibility, fracture toughness, and energy absorption of different biological materials for a variety of functions (e.g., body support, joint movement, impact protection, weight reduction). The structural elements identified are: fibrous, helical, gradient, layered, tubular, cellular, suture, and overlapping. For each of the structural design elements, critical design parameters are presented along with constitutive equations with a focus on mechanical properties. Additionally, example organisms from varying biological classes are presented for each case to display the wide variety of environments where each of these elements is present. Examples of current bioinspired materials are also introduced for each element.