Controllable synthesis of ZnO nanoparticles and their morphology-dependent antibacterial and optical properties

Zinc Oxide Nanoparticles Obtained by Supercritical Antisolvent Precipitation for the Photocatalytic Degradation of Crystal Violet Dye

In this work, the synthesis of zinc oxide (ZnO) photocatalyst from thermal decomposition of zinc acetate (ZnAc) nanoparticles obtained by supercritical antisolvent (SAS) precipitation was investigated. The optimization of calcination conditions of the SAS ZnAc was carried out, studying the effect of temperature (in the range 300–600 °C) on the production of ZnO nanoparticles. In particular, it was demonstrated that the organic residues in ZnO and its particle size, thus the specific surface area, strongly affect the photocatalytic performances. SAS micronization of ZnAc produces regular nanoparticles with a mean diameter of about 54.5 ± 11.5 nm, whereas unprocessed ZnAc is characterized by very large crystals. The experimental results evidenced that ZnAc prepared by SAS process calcined at 500 °C showed a regular nanometric structure (mean diameter: 65.0 ± 14.5 nm) and was revealed to be the best choice for the photocatalytic removal of crystal violet dye (CV). In fact, the photocatalytic activity performances of ZnO nanoparticles prepared by this route were higher with respect to that of ZnO from unprocessed ZnAc calcined at 500 °C (which is characterized by irregular tetrapods with mean size 181.1 ± 65.5 nm). The optimized photocatalyst was able to assure the complete CV decolorization in 60 min of UV irradiation time and a mineralization degree higher than 90% after 120 min of treatment time.

Design and fabrication of novel thiourea coordination compounds as potent inhibitors of bacterial growth

A new thiourea ligand (HL), namely N-(4-chlorophenyl)morpholine-4-carbothioamide and its Co(III), Ni(II) and Ag(I) complexes (1a, 1b and 1c) were synthesized and investigated by Fourier-transform infrared, ¹H NMR and UV-visible spectroscopies. The compounds HL and 1c were characterized by single-crystal X-ray crystallography revealing the triclinic space group P[Formula: see text] for both compounds. The inhibitory effect of HL ligand, 1a, 1b, and 1c complexes was investigated with in vitro tests on Gram-positive and Gram-negative bacteria. For the 1c complex, the results showed that the coordination of the HL to Ag(I) ion increased its antibacterial effect especially against E. coli. The assays also indicated that for the same bacteria strains, the new complexes showed higher activity than the ligand, with the relative activity 1c > 1b > 1a > HL. Moreover, all samples were more suitable antimicrobial agents against the Gram-negative than those of the Gram-positive bacteria. Eventually, the relationship between the structure and bactericidal activities of these specimens was examined by calculating frontier molecular orbital (HOMO and LUMO) energies using density functional theory method at the 6-31 G*/LANL2DZ level of theory.

Synthesis, optimization and applications of ZnO/polymer nanocomposites

Polymer composites have established an excellent position among the technologically essential materials because of their wide range of applications. An enormous research interest has been devoted to zinc oxide (ZnO) based polymer nanocomposites, due to their exceptional electrical, optical, thermal, mechanical, catalytic, and biomedical properties. This article provides a review of various polymer composites consisting of ZnO nanoparticles (NPs) as reinforcements, exhibiting excellent properties for applications such as the dielectric, sensing, piezoelectric, electromagnetic shielding, thermal conductivity and energy storage. The preparation methods of such composites including solution blending, in situ polymerization, and melt intercalation are also explained. The current challenges and potential applications of these composites are provided in order to guide future progress on the development of more promising materials. Finally, a detailed summary of the current trends in the field is presented to progressively show the future prospects for the development of ZnO containing polymer nanocomposite materials.

Ordering selected Zn(II), Cu(II), Pd(II) and Co(III) complex compounds: their separately and combinedly antibacterial therapy and DNA-binding studies

In this study, four Co(III)-, Cu(II)-, Zn(II)- and Pd(II)-based potent antibacterial complexes of formula K₃[Co(ox)₃]·3H₂O (I), [Cu(phen)₂Cl]Cl·6.5H₂O (II), [Zn(phen)₃]Cl₂ (III) and [Pd(phen)₂](NO₃)₂ (IV) (where ox is oxalato and phen is 1,10-phenanthroline) were synthesized. They were characterized by elemental analysis, molar conductivity measurements, UV-vis, Fourier transform infrared (FT-IR) and proton nuclear magnetic resonance (¹H-NMR) techniques. These metal complexes were ordered in three combination series of I+II, I+II+III and I+II+III+IV. Antibacterial screening for each metal complex and their combinations against Gram-positive and Gram-negative bacteria revealed that all compounds were more potent antibacterial agents against the Gram-negative than those of the Gram-positive bacteria. The four metal complexes showed antibacterial activity in the order I > II > III > IV, and the activity of their combinations followed the order of I+II+III+IV > I+II+III > I+II. The DNA-binding properties of complex (I) and its three combinations were studied using electronic absorption and fluorescence (ethidium bromide displacement assay) spectroscopy. The results obtained indicated that all series interact effectively with calf thymus DNA (CT-DNA). The binding constant (K_b), the number of binding sites (n) and the Stern-Volmer constant (K_sv) were obtained based on the results of fluorescence measurements. The calculated thermodynamic parameters supported that hydrogen bonding and van der Waals forces play a major role in the association of each series of metal complexes with CT-DNA and follow the above-binding affinity order for the series. Communicated by Ramaswamy H. Sarma.

Green synthesis of ZnO hierarchical microstructures by Cordia myxa and their antibacterial activity

In this study, the leaves extract of Cordia myxa, has been used for the first time to synthesize zinc oxide (ZnO) hierarchical microstructures. The solution combustion method was employed as a self-sustaining reaction between zinc nitrate and the leaves extract. The surface properties of leaves mediated ZnO microstructures were determined by UV–Visible spectral analysis, Fourier transform infrared (FT-IR), Cold field emission-scanning electron microscopy (CFE-SEM), Energy dispersive X-ray (EDX), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). In addition, the effect of the leaves extract concentration on ZnO structures, size and surface properties was also studied. ZnO structures synthesized employing C. myxa were found to be hexagonal, triangular and round in shape which was determined using CFE-SEM. X-ray diffraction (XRD) analysis confirmed the crystalline nature of compounds. Furthermore, C. myxa mediated ZnO microstructures shows good bactericidal activity against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria.

The impact of morphology and size of zinc oxide nanoparticles on its toxicity to the freshwater microalga, Raphidocelis subcapitata

Microalgae are key test organisms to assess the effects of chemicals on aquatic ecosystems. Zinc oxide nanoparticles (ZnO NPs) as a widely used metal oxide is considered a potential threat to these primary producers at the base of the food chain. This study investigates the toxicity of ZnO NPs, bulk ZnO, and Zn²⁺ to the representative of freshwater microalgae, Raphidocelis subcapitata. To examine the effect of shape and size of nanoparticles, two types of spherical ZnO NPs with different sizes (20 and 40 nm) and two types of rod-shaped ZnO NPs with different lengths (100 and 500 nm) were synthesized. Microalgal cells were exposed to eight concentrations of each ZnO NP type from 0.01 to 0.7 mg/L for 96 h. The results showed that 0.7 mg/L of ZnO NP could completely inhibit algal growth. Size did not interfere with toxicity in spherical ZnO NPs, but the toxicity decreased by increasing the size of rod-shaped ZnO NPs. Spherical ZnO NPs acted more destructive to microalgal cells than nanorod shape. The addition of 0.7 mg/L of ZnO nanorods to samples caused 30% cell death, while 50% cell death was observed by adding the same concentration of nanospherical ZnO. Nano ZnO revealed to be more toxic than bulk ZnO and Zn²⁺. The Zn²⁺ released from dissolution of ZnO NPs was one of the sources of toxicity, but the ZnO nanostructures were also an important factor in the toxicity.

Cs4PbBr6/CsPbBr3 perovskite composites for WLEDs: pure white, high luminous efficiency and tunable color temperature

Cs₄PbBr₆/CsPbBr₃ perovskite composites are fabricated by room-temperature one-pot mixing synthesis, which is short in time, free from inert gases and delivers a high product yield. Temperature-dependent photoluminescence shows that a larger exciton binding energy of 291.1 meV exhibits better thermal stability compared with that of pure Cs₄PbBr₆ and CsPbBr₃ materials. The CIE chromaticity coordinates (0.1380, 0.7236) of green LEDs designed with Cs₄PbBr₆/CsPbBr₃ perovskite composites show almost no variation under driving current changing from 5 to 30 mA. Furthermore, the ground Cs₄PbBr₆/CsPbBr₃ perovskite composites mixed with red emitting K₂SiF₆:Mn⁴⁺ phosphor are dropped and casted on a blue-emitting InGaN chip. The white light emitting diodes (WLEDs) are presented, which have good luminous efficiency of 65.33 lm W⁻¹ at 20 mA, a correlated color temperature of 5190 K, and the white gamut with chromaticity coordinate of (0.3392, 0.3336). According to the state of art, these excellent characteristics observed are much superior to the reported results of conventional perovskite-based WLEDs, which demonstrate the immense potential and great prospect of Cs₄PbBr₆/CsPbBr₃ perovskite composites to replace conventional phosphors in lighting devices.

WLED devices are designed with high luminous efficiency of 65.33 lm W⁻¹ and excellent CIE chromaticity coordinates of (0.3392, 0.3336). The properties of material and the luminous performance of device are calculated and discussed comprehensively.

Biogenesis of ZnO nanoparticles using Pandanus odorifer leaf extract: anticancer and antimicrobial activities

The continuously increasing incidence rates of cancer and infectious diseases are open threats to the sustainable survival of animals and humans.

Elemental zinc to zinc nanoparticles: is ZnO NPs crucial for life? Synthesis, toxicological, and environmental concerns

The semi-conducting material zinc is one of the essential trace elements for humans, is a co-factor of more than 300 enzymes, and plays an important role in maintaining vital cellular functions. Deficiency of zinc may lead to cancer initiation; however, a high concentration also has toxic effects that might be life threatening. The toxicity can be addressed by the disequilibrium of zinc-mediated proteins and oxidative stress that produce nascent oxygen, hydroxyl radicals, and other reactive oxygen species. Zinc-based nanoparticles (NPs) are among the most important and multifunctional compounds. Zinc oxide (ZnO) NPs exhibit attractive antimicrobial and photocatalytic properties due to the smaller particle size and increased particle surface reactivity. Further, these are more biocompatible compared to other metallic NPs, easily synthesizable, and have high selectivity, enhanced cytotoxicity, and are a promising anticancer agent. However, some of the pertinent concerns regarding nano-zinc still needs to be clarified. Current research also demonstrates their usage in wastewater treatment, textile, medicine, etc. This review covers the importance of zinc for living systems and its NPs, with more emphasis on ZnO NPs. A comprehensive overview of ZnO NPs, their synthesis, characterization techniques, crystal structure, properties, and brief industrial applications are presented.

Effects of Dietary Zinc Oxide Nanoparticles on Growth, Diarrhea, Mineral Deposition, Intestinal Morphology, and Barrier of Weaned Piglets

This study was conducted to investigate effects of dietary zinc oxide nanoparticles (nano-ZnOs) on growth, diarrhea rate, mineral deposition (Zn, Fe, and Mn), intestinal morphology, and barrier of weaned piglets. A total of 384 weaned piglets (Duroc × Landrace × Yorkshire) in 4 groups were fed a basal diet supplemented with 0, 400, and 800 mg/kg nano-ZnOs or 3000 mg/kg ZnO for 14 days. Compared with the control group, 800 mg/kg nano-ZnOs and 3000 mg/kg ZnO significantly increased average daily gain and decreased diarrhea rate of weaned piglets. There was no significant difference among ZnO and nano-ZnO groups. ZnO and nano-ZnOs did not affect serum activities of glutamic oxalacetic transaminase, glutamic-pyruvic transaminase, and lactate dehydrogenase. However, ZnO and 800 mg/kg nano-ZnOs significantly increased zinc concentrations in plasma, liver, pancreas, and tibia, without affecting Fe and Mn concentrations. Compared with the control group, 800 mg/kg nano-ZnOs significantly reduced plasma diamine oxidase activity, decreased total aerobic bacterial population in mesenteric lymph node, enhanced mRNA expressions of occludin, ZO-1, IL-1β, IL-10, TNF-α, and ki67 in ileal mucosa, and increased villous height, width, crypt depth, and surface area. Compared to ZnO group, 800 mg/kg nano-ZnOs significantly decreased aerobic bacterial population, enhanced mRNA expressions of occludin, IL-1β, IL-10, and TNF-α, and reduced fecal zinc concentration. These results indicated that 800 mg/kg nano-ZnOs might be a potential substitute for 3000 mg/kg ZnO in diets of weaned piglets.

Chitosan based metallic nanocomposite scaffolds as antimicrobial wound dressings

Chitosan based nanocomposite scaffolds have attracted wider applications in medicine, in the area of drug delivery, tissue engineering and wound healing. Chitosan matrix incorporated with nanometallic components has immense potential in the area of wound dressings due to its antimicrobial properties. This review focuses on the different combinations of Chitosan metal nanocomposites such as Chitosan/nAg, Chitosan/nAu, Chitosan/nCu, Chitosan/nZnO and Chitosan/nTiO2 towards enhancement of healing or infection control with special reference to the antimicrobial mechanism of action and toxicity.

Visible light responsive flower-like ZnO in photocatalytic antibacterial mechanism towards Enterococcus faecalis and Micrococcus luteus

Flower-like ZnO micro/nanostructures were successfully fabricated via a surfactant-free co-precipitation method. The as-synthesized product was characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FTIR), UV-vis diffuse reflectance spectroscopy (UV-vis DRS) and photoluminescence (PL) analyses. In the presence of visible light irradiation, the as-synthesized flower-like ZnO showed higher antibacterial activities against Enterococcus faecalis (E. faecalis) and Micrococcus luteus (M. luteus) than that of commercial ZnO. The excellent antibacterial performance of synthesized flower-like ZnO was also observed via the bacterial morphological change, K⁺ ions leakage and protein leakage in extracellular suspension. In addition, the FTIR investigation on both treated bacteria further confirmed the bacterial membrane damage via cellular substance alteration. The enhancement of the antibacterial activity of synthesized ZnO can be attributed to the unique flower-like morphology which can increase the surface OH^- groups and the quantity of photogenerated electron-hole pair available to participate in the photocatalytic reaction. The reactive oxidizing species (ROS) scavengers experiments showed that H₂O₂ played a main role in the photocatalytic antibacterial process. Our study showed that the synthesized flower-like ZnO micro/nanostructures can act as efficient antibacterial agents in the photocatalytic antibacterial process under visible light irradiation.

Influence of Mg Doping on ZnO Nanoparticles for Enhanced Photocatalytic Evaluation and Antibacterial Analysis

In this research, a facile co-precipitation method was used to synthesize pure and Mg-doped ZnO nanoparticles (NPs). The structure, morphology, chemical composition, and optical and antibacterial activity of the synthesized nanoparticles (NPs) were studied with respect to pure and Mg-doped ZnO concentrations (0-7.5 molar (M) %). X-ray diffraction pattern confirmed the presence of crystalline, hexagonal wurtzite phase of ZnO. Scanning electron microscope (SEM) images revealed that pure and Mg-doped ZnO NPs were in the nanoscale regime with hexagonal crystalline morphology around 30-110 nm. Optical characterization of the sample revealed that the band gap energy (Eg) decreased from 3.36 to 3.04 eV with an increase in Mg2+ doping concentration. Optical absorption spectrum of ZnO redshifted as the Mg concentration varied from 2.5 to 7.5 M. Photoluminescence (PL) spectra showed UV emission peak around 400 nm. Enhanced visible emission between 430 and 600 nm with Mg2+ doping indicated the defect density in ZnO by occupying Zn2+ vacancies with Mg2+ ions. Photocatalytic studies revealed that 7.5% Mg-doped ZnO NPs exhibited maximum degradation (78%) for Rhodamine B (RhB) dye under UV-Vis irradiation. Antibacterial studies were conducted using Gram-positive and Gram-negative bacteria. The results demonstrated that doping with Mg ions inside the ZnO matrix had enhanced the antibacterial activity against all types of bacteria and its performance was improved with successive increment in Mg ion concentration inside ZnO NPs.

A novel stellerite-based photocatalytic composite and its enhanced disinfection application

The aim of this work was to prepare, characterize and evaluate the potential of novel ZnO/stellerite composite photocatalysts against Staphylococcus aureus (S. aureus). SEM/EDS studies employed to study the surface morphological properties revealed stellerite as the catalysts carrier played a role of dispersant for ZnO nanoparticles. The XRD patterns of the ZnO/stellerite indicated hexagonal crystal structure with 20-30 nm size. It was found that the crystallite size of ZnO/stellerite was much smaller as compared to pure ZnO and increased with increasing ZnO loading amount. The results of optical properties of ZnO/stellerite showed smaller band gap in contrast to pure ZnO, investigated by UV-vis absorption. Due to the optimum ZnO loading, the as-prepared ZnO-20 composite had the highest BET surface area and the pore volume. Using the TG-DSC measurement, the high thermal stability of the product was studied for different temperature values. Antibacterial activity of ZnO/stellerite affected by the ZnO loading, concentration of samples and light conditions (under dark and UV irradiation conditions) was examined by disinfection of S. aureus. The as-prepared ZnO-20 composite with 100 mg/L was found to exhibit excellent inactivation efficiencies (87.65% in the dark and 97.67% under UV illumination) towards S. aureus. Compared with pure ZnO, the obtained composite photocatalysts showed significantly better antibacterial performance by studying the disinfection kinetics of S. aureus. Thus, the present study reveals that the novel ZnO/stellerite shows great potential for its use in the targeted disinfection applications.

Influence of formulation of ZnO nanoblokes containing metallic ions dopants on their cytotoxicity and protective factors: An in vitro study on human skin cells exposed to UVA radiation

•

The [Zn(O)/M] (M = Mg, Al, Ca, Ti) synthesize by thermal method and characterize.

•

The metal dopants percolate into crystal lattice of ZnO and stable it.

•

The [Zn(O)/M] shows very low amount of Zn⁺² release into culture medium.

•

Intracellular reactive oxygen species generation decrease under UVA radiation.

•

The [Zn(O)/M] protects of human skin cells against UVA radiation.

Application of ZnO nanoparticles in sunscreens exposes human skin with their adverse effects, which correlates to dissolution/translocation of free Zn⁺² ions. The possibility of decreasing solubility and therefore, reducing toxicity, by structural modifications have been discussed as a solution. The present investigation has developed new metallic lattices of ZnO to reduce cytotoxicity of ZnO nanoparticles. Novel metal-promoted Zn-based nanocomposites ([Zn(O)/M], M = Mg, Al, Ca, Ti) were synthesized and their physicochemical properties and their cytotoxicity were evaluated. Solubility and release studies showed that modification of ZnO structure decreases release of Zn⁺² into culture medium. XRD and UV absorbance analyses showed that metallic-dopants percolate into crystalline lattice of ZnO. This phenomenon is basic reason for stability of Zn-based network. Cell culture studies and MTT assay on human skin cells (HFF-1) exposed to UVA radiation showed that the level of protection of [Zn(O)/M] compounds were more than of [ZnO]. Dichlorofluoroscein diacetate-ROS assay and Zn⁺² release experiments indicated that [Zn(O)/M] nanocomposites decreased the level of ROS generation and Zn⁺² release in compared to ZnO, indicating higher safety of nanocomposites. This study shows that the synthesized Zn-based nanocomposites have potential to be used as safer and more effective sunscreens than ZnO.

Sonication affects the quantity and the morphology of ZnO nanostructures synthesized on the mild steel and changes the corrosion protection of the surface

The several types of sonication methods were applied to access the different morphologies of ZnO nanostructures on the surface of mild steel. To achieve this goal, a sonictor equipped with the probe extender was used as a high intensity ultrasonic apparatus for direct sonication. Furthermore, an ultrasonic bath (low intensity) and a cup-horn system (high intensity) were applied for indirect sonication. To find the effect of the acoustic waves on the ZnO morphology, the micrographs of obtained surfaces were compared to the sample prepared by the conventional method using scanning electron microscopy (SEM). In this work, the beneficial effects of sonication were subjected on the breaking down the agglomerates to smaller size particles, metal surface activation, and on the facile approach to nanostructures synthesis. The influence of the resulting ZnO structures over the corrosion protection of the electroless Ni-P alloy coatings was evaluated by the potentiodynamic polarization technique (Tafel extrapolation).

Blue light irradiation triggers the antimicrobial potential of ZnO nanoparticles on drug-resistant Acinetobacter baumannii

Photodynamic inactivation (PDI) is a non-invasive and safe therapeutic method for microbial infections. Bacterial antibiotic resistance is caused by antibiotics abuse. Drug-resistant Acinetobacter spp. is a serious problem in hospitals around the world. These pathogens from nosocomial infections have high mortality rates in frailer people, and Acinetobacter spp. is commonly found in immunocompromised patients. Visible light is safer than ultraviolet light (UV) for PDI of nosocomial pathogens with mammalian cells. Zinc oxide nanoparticles (ZnO-NPs) were used in this study as an antimicrobial agent and a photosensitizer. ZnO is recognized as safe and has extensive usage in food additives, medical and cosmetic products. In this study, we used 0.125 mg/ml ZnO-NPs combined with 10.8 J/cm² blue light (BL) on Acinetobacter baumannii (A. baumannii) that could significantly reduce microbial survival. However, individual exposure to ZnO-NPs does not affect the viability of A. baumannii. BL irradiation could trigger the antimicrobial ability of ZnO nanoparticles on A. baumannii. The mechanism of photocatalytic ZnO-NPs treatment for sterilization occurs through bacterial membrane disruptions. Otherwise, the photocatalytic ZnO-NPs treatment showed high microbial eradication in nosocomial pathogens, including colistin-resistant and imipenem-resistant A. baumannii and Klebsiella pneumoniae. Based on our results, the photocatalytic ZnO-NPs treatment could support hygiene control and clinical therapies without antibiotics to nosocomial bacterial infections.

ZnO nanoparticle preparation route influences surface reactivity, dissolution and cytotoxicity

ZnO nanoparticles (nZnO) are commonly used in nanotechnology applications despite their demonstrated cytotoxicity against multiple cell types. This underscores the significant need to determine the physicochemical properties that influence nZnO cytotoxicity. In this study, we analyzed six similarly sized nZnO formulations, along with SiO2-coated nZnO, bulk ZnO and ZnSO4 as controls. Four of the nZnO samples were synthesized using various wet chemical methods, while three employed high-temperature flame spray pyrolysis (FSP) techniques. X-ray diffraction and optical analysis demonstrated the lattice parameters and electron band gap of the seven nZnO formulations were similar. However, electrophoretic mobility measures, hydrodynamic size, photocatalytic rate constants, dissolution potential, reactive oxygen species (ROS) production and, more importantly, the cytotoxicity of the variously synthesized nZnO towards Jurkat leukemic and primary CD4+ T cells displayed major differences. Surface structure analysis using FTIR, X-ray photoelectron spectroscopies (XPS) and dynamic light scattering (DLS) revealed significant differences in the surface-bound chemical groups and the agglomeration tendencies of the samples. The wet chemical nZnO, with higher cationic surface charge, faster photocatalytic rates, increased extracellular dissolution and ROS generation demonstrated greater cytotoxicity towards both cell types than those made with FSP techniques. Furthermore, principal component analysis (PCA) suggests that the synthesis procedure employed influences which physicochemical properties contribute more to the cytotoxic response. These results suggest that the synthesis approach results in unique surface chemistries and can be a determinant of cellular cytotoxicity and oxidative stress responses.

Near-Infrared Laser-Excited Nanoparticles To Eradicate Multidrug-Resistant Bacteria and Promote Wound Healing

With the ever-growing threat of bacterial infections, especially for multidrug-resistant microbial infections, the development of highly effective treatment modalities to inhibit the infections is challenging. Although silver nanoparticles have been intensively applied as antimicrobial agent for decades, the therapeutic efficacy toward multidrug-resistant bacteria is still unsatisfactory. Here, we show that near-infrared (NIR) laser-excited silver triangular nanoparticles (Tri-Ag) can efficiently kill Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus both in vitro and in vivo. Notably, multidrug-resistant bacterial clinical isolates, including methicillin-resistant S. aureus and extended spectrum β-lactamase E. coli strain were significantly inhibited by the combined treatment of the Tri-Ag with NIR laser irradiation due to their synergistic antibacterial ability. Taking the advantage of its strong near-infrared absorbance, photothermal treatment is also conducted with Tri-Ag, achieving a remarkable synergistic antibacterial effect to inhibit various bacteria at a rather low concentration of this agent. Given the above advantages, the combination therapy of Tri-Ag with assistance of NIR laser may find potential applications to strengthen the antimicrobial arsenal for fighting bacterial infections.

Effects of various morphologies on the optical and electrical properties of boehmite nanostructures

This work reports the variations in the fluorescence and ultra-high dielectric properties of various boehmite nano-structures.

3D ZnO/Ag Surface-Enhanced Raman Scattering on Disposable and Flexible Cardboard Platforms

In the present study, zinc oxide (ZnO) nanorods (NRs) with a hexagonal structure have been synthesized via a hydrothermal method assisted by microwave radiation, using specialized cardboard materials as substrates. Cardboard-type substrates are cost-efficient and robust paper-based platforms that can be integrated into several opto-electronic applications for medical diagnostics, analysis and/or quality control devices. This class of substrates also enables highly-sensitive Raman molecular detection, amiable to several different operational environments and target surfaces. The structural characterization of the ZnO NR arrays has been carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical measurements. The effects of the synthesis time (5–30 min) and temperature (70–130 °C) of the ZnO NR arrays decorated with silver nanoparticles (AgNPs) have been investigated in view of their application for surface-enhanced Raman scattering (SERS) molecular detection. The size and density of the ZnO NRs, as well as those of the AgNPs, are shown to play a central role in the final SERS response. A Raman enhancement factor of 7 × 10⁵ was obtained using rhodamine 6 G (R6G) as the test analyte; a ZnO NR array was produced for only 5 min at 70 °C. This condition presents higher ZnO NR and AgNP densities, thereby increasing the total number of plasmonic “hot-spots”, their volume coverage and the number of analyte molecules that are subject to enhanced sensing.

Ultra-Fast Microwave Synthesis of ZnO Nanorods on Cellulose Substrates for UV Sensor Applications

In the present work, tracing and Whatman papers were used as substrates to grow zinc oxide (ZnO) nanostructures. Cellulose-based substrates are cost-efficient, highly sensitive and environmentally friendly. ZnO nanostructures with hexagonal structure were synthesized by hydrothermal under microwave irradiation using an ultrafast approach, that is, a fixed synthesis time of 10 min. The effect of synthesis temperature on ZnO nanostructures was investigated from 70 to 130 °C. An Ultra Violet (UV)/Ozone treatment directly to the ZnO seed layer prior to microwave assisted synthesis revealed expressive differences regarding formation of the ZnO nanostructures. Structural characterization of the microwave synthesized materials was carried out by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The optical characterization has also been performed. The time resolved photocurrent of the devices in response to the UV turn on/off was investigated and it has been observed that the ZnO nanorod arrays grown on Whatman paper substrate present a responsivity 3 times superior than the ones grown on tracing paper. By using ZnO nanorods, the surface area-to-volume ratio will increase and will improve the sensor sensibility, making these types of materials good candidates for low cost and disposable UV sensors. The sensors were exposed to bending tests, proving their high stability, flexibility and adaptability to different surfaces.

Efficient antibacterial nanosponges based on ZnO nanoparticles and doxycycline

Bacterial soft rot is responsible for the loss of about 25% of worldwide production in vegetables and fruits. Efforts have been made to develop an effective nanosponge with the capacity to load and release antibacterial drugs to protect plants. Based on the potential of the ZnO nanoparticles (ZnO-NPs) to achieve this goal, this study synthesized NP via the sol-gel and hydrothermal methods by controlling native defects, such as oxygen vacancies, using thermal treatments and reduced atmospheres. To characterize the ZnO NPs, X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), optical spectroscopy, electron paramagnetic resonance (EPR), Zeta Potential measurements and surface area with the Brunauer-Emmett-Teller (BET) method were used. The photophysical and photochemical properties via spin trapping method aligned with EPR using UVA light showed a greater formation of electron-hole pairs and hydroxyl radicals for the reduced ZnO NPs when compared with the oxidized ones. Additionally, we found that reduced ZnO-NPs have high effectively against Escherichia coli, Erwinia carotovora and Pantoea sp. bacteria using the photocatalytic effect in the UV range. Moreover, ZnO-NPs loaded with DOX release profile enables the release of DOX within 46days, where 25% was released during the first 10h followed by a second delivery phase with an interesting short-term efficacy (<1day) against E. carotovora and Pantoea sp. Bacteria. For the first time, it was demonstrated that ZnO-NPs and ZnO-NPs loaded with DOX have efficient UV photocatalytic activities against bacterial soft rot infections.

Zinc oxide nanoparticles as a substitute for zinc oxide or colistin sulfate: Effects on growth, serum enzymes, zinc deposition, intestinal morphology and epithelial barrier in weaned piglets

The objective of this study was to evaluate effects of zinc oxide nanoparticles (nano-ZnOs) as a substitute for colistin sulfate (CS) and/or zinc oxide (ZnO) on growth performance, serum enzymes, zinc deposition, intestinal morphology and epithelial barrier in weaned piglets. A total of 216 crossbred Duroc×(Landrace×Yorkshire) piglets weaned at 23 days were randomly assigned into 3 groups, which were fed with basal diets supplemented with 20 mg/kg CS (CS group), 20mg/kg CS+3000 mg/kg ZnO (CS+ZnO group), and 1200 mg/kg nano-ZnOs (nano-ZnO group) for 14 days. Results indicated that compared to CS group, supplementation of 1200 mg/kg nano-ZnOs (about 30 nm) significantly increased final body weight and average daily gain, and 3000 mg/kg ZnO plus colistin sulfate significantly increased average daily gain and decreased diarrhea rate in weaned piglets. There was no significant difference in growth performance and diarrhea rate between nano-ZnO and CS+ZnO groups. Supplementation of nano-ZnOs did not affect serum enzymes (glutamic oxalacetic transaminase, glutamic-pyruvic transaminase, and lactate dehydrogenase), but significantly increased plasma and tissue zinc concentrations (liver, tibia), improved intestinal morphology (increased duodenal and ileal villus length, crypt depth, and villus surface), enhanced mRNA expression of ZO-1 in ileal mucosa, and significantly decreased diamine oxidase activity in plasma, total aerobic bacterial population in MLN as compared to CS group. Effects of nano-ZnOs on serum enzymes, intestinal morphology, and mRNA expressions of tight junction were similar to those of high dietary ZnO plus colistin sulfate, while nano-ZnOs significantly reduced zinc concentrations of liver, tibia, and feces, and decreased total aerobic bacterial population in MLN as compared to CS+ZnO group. These results suggested that nano-ZnOs (1200 mg/kg) might be used as a substitute for colistin sulfate and high dietary ZnO in weaned piglets.

Facile, high yield ultrasound mediated protocol for ZnO hierarchical structures synthesis: Formation mechanism, optical and photocatalytic properties

Hierarchical flowers-like zinc oxide structures have been successfully obtained by a simple and fast ultrasound-assisted method performed in a ordinary ultrasonic bath using an ammonia solution and zinc acetate, in the absence of any surfactant or template. The composition, structure, crystallinity, morphology and optical properties of the materials obtained at different ultrasound irradiation times were characterized by infrared, UV-Vis and photoluminescence spectroscopy, X-ray diffraction, scanning and transmission electron microscopy investigations. It was proved that the ultrasound irradiation time manipulates both the defect content (implicit the photoluminescent properties) and morphology of the ZnO materials: shorter irradiation times leads to the synthesis of high-defected ZnO structures of flower morphology with triangular-shaped petals, while higher irradiation times favours the formation of low-defected ZnO structures with tipped rod-like petals. A plausible growth mechanism of the architectures that implies aggregation via oriented attachment followed by an Ostwald ripening is advanced based on these results. The ZnO flower-like structures present high photocatalytic activities, a total phenol mineralization being registered in the case of visible light experiments. Electron-spin resonance measurements demonstrate the generation of reactive oxygen species, namely hydroxyl radicals but also C centred radicals adducts derived most probable from the residual acetate adsorbed on ZnO surface.

The Relationship between the Mechanism of Zinc Oxide Crystallization and Its Antimicrobial Properties for the Surface Modification of Surgical Meshes

Surgical meshes were modified with zinc oxide (ZnO) using a chemical bath deposition method (CBD) at 50 °C, 70 °C, or 90 °C, in order to biologically activate them. Scanning electron microscopy (SEM), mass changes, and X-ray diffraction measurements revealed that at low temperatures Zn(OH)₂ was formed, and that this was converted into ZnO with a temperature increase. The antimicrobial activity without light stimulation of the ZnO modified Mersilene™ meshes was related to the species of microorganism, the incubation time, and the conditions of the experiment. Generally, cocci (S. aureus, S. epidermidis) and yeast (C. albicans) were more sensitive than Gram-negative rods (E. coli). The differences in sensitivity of the studied microorganisms to ZnO were discussed. The most active sample was that obtained at 90 °C. The mechanism of antimicrobial action of ZnO was determined by various techniques, such as zeta potential analysis, electron paramagnetic resonance (EPR) spectroscopy, SEM studies, and measurements of Zn(II) and reactive oxygen species (ROS) concentration. Our results confirmed that the generation of free radicals was crucial, which occurs on the surface of crystalline ZnO.

Highly efficient inactivation of bacteria found in drinking water using chitosan-bentonite composites: Modelling and breakthrough curve analysis

Disinfection of bacterially-contaminated drinking water requires a robust and effective technique and can be achieved by using an appropriate disinfectant material. The advanced use of nanomaterials is observed as an alternative and effective way for the disinfection process and water treatment as a whole. Hence, the inactivation of Escherichia coli (E. coli) using chitosan-Bentonite (Cts-Bent) composites was studied in a fixed bed column. Cts-Bent composites were synthesized using in situ cross-linking method using Bent-supported silver and zinc oxide nanoparticles. These composites were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy. The effect of the composite bed mass, initial concentration of bacteria, and flow rate on the bacterial inactivation was investigated. The characterization results revealed that the composites were successfully prepared and confirmed the presence of both silver and zinc oxide nanoparticles in the chitosan matrix. The growth curves of E. coli were expressed as breakthrough curves, based on the logistic, Gompertz, and Boltzmann models. The breakthrough time and processed volume of treated water at breakthrough were used as performance indicators, which revealed that the composites performed best at low bacterial concentration and flow rate and with substantial bed mass. The chitosan composites were found to be highly effective, which was demonstrated when no bacteria were observed in the effluent sample within the first 27 h of analysing river water. All the models were suitable for adequately describing and reproducing the experimental data with a sigmoidal pattern. Therefore, the prepared composite is showing potential to work as a disinfectant and provide an alternative solution for water disinfection; hence this study should propel further research of the same or similar materials.

Effect of zinc oxide film morphologies on the formation of Shewanella putrefaciens biofilm

Zinc oxide (ZnO) films were prepared on aluminum substrate by a hydrothermal method to investigate the effect of their surface characteristics, including morphology and hydrophobicity, on the corresponding antibiofilm performance. The surface characteristics of the prepared ZnO films were examined by a comprehensive range of methodologies, suggesting that films of distinctive surface morphologies were successfully formed. Subsequently, their antibiofilm activities, using Shewanella putrefaciens as a model bacterium, were assessed. Surface measurements confirmed that the ZnO films equipped with a nanoscopic needlelike surface feature are more hydrophobic than those possessing densely packed microflakes. The reduced number of live cells and presence of biofilm, confirmed by optical and electron microscopy results, suggest that the former films possess an excellent antibiofilm performance. It is believed that the engineered nanoscopic needle feature might penetrate the cell membrane when they are in contact, allowing the effective substance of ZnO antibacterial ingredients to diffuse into the embedded bacteria. Furthermore, such surface characteristics might perturb the integrity of the cell membrane causing the intracellular substance is leaked from the cells. As such, the combinatorial effects of nanoscopic feature resulted in an inhibited growth of S. putrefaciens biofilm on ZnO film.