Bioactive biomaterials

The inhibitory effect of an RGD-human chitin-binding domain fusion protein on the adhesion of fibroblasts to reacetylated chitosan films

Biomaterials used for tissue engineering applications must provide a structural support for the tissue development and also actively interact with cells, promoting adhesion, proliferation, and differentiation. To achieve this goal, adhesion molecules may be used, such as the tripeptide Arg-Gly-Asp (RGD). A method based on the use of a carbohydrate-binding module, with affinity for chitin, was tested as an alternative approach to the chemical grafting of bioactive peptides. This approach would simultaneously allow the production of recombinant peptides (alternatively to peptide synthesis) and provide a simple way for the specific and strong adsorption of the peptides to the biomaterial.A fusion recombinant protein, containing the RGD sequence fused to a human chitin-binding module (ChBM), was expressed in E. coli. The adhesion of fibroblasts to reacetylated chitosan (RC) films was the model system selected to analyze the properties of the obtained proteins. Thus, the evaluation of cell attachment and proliferation on polystyrene surfaces and reacetylated chitosan films, coated with the recombinant proteins, was performed using mouse embryo fibroblasts 3T3. The results show that the recombinant proteins affect negatively fibroblasts anchorage to the materials surface, inhibiting its adhesion and proliferation. We also conclude that this negative effect is fundamentally due to the human chitin-binding domain.

Micro-stratified architectures based on successive stacking of alginate gel layers and poly(l-lysine)-hyaluronic acid multilayer films aimed at tissue engineering

A micro-stratified 3D scaffold was designed by successive stacking of alginate gel layers (AGLs) and poly(l-lysine)-hyaluronic acid (PLL-HA) multilayer films. AGLs are obtained by complexation of alginate by Ca2+ ions. Alginate solutions are first sprayed onto a solid substrate inclined such that the excess of solution be removed by natural drainage. A CaCl2 solution is then either sprayed onto the substrate or the alginate covered substrate is dipped into a CaCl2 solution. The spraying of the CaCl2 solution leads to micro-porous AGLs, whereas the dipping in a CaCl2 aqueous solution leads to a more homogeneous gel layer without porosity. The second process also allows the formation of AGLs with a controlled thickness. With the goal of stacking different AGLs and PLL-HA films, the influence of a PLL-HA precursor film on the formation of AGLs is firstly investigated. It is found that when an alginate solution is sprayed on a PLL-HA multilayer built in the presence of CaCl2, the multilayer plays the role of reservoir of Ca2+ ions and of PLL chains, which both diffuse out of the multilayer film and complex alginate chains. This leads to the formation of a "pre-alginate gel". When this film is further dipped in the CaCl2 solution, an additional AGL forms, which is, however, free of PLL chains. Finally after the build-up of a PLL-HA film on the top of AGL, we succeeded in designing micro-stratified 3D scaffolds constituted by alternating strata of AGLs and PLL-HA films. This micro-stratified gel provides a new scaffold design with a perfectly controlled build-up: AGL aims to be a 3D scaffold for cell culture, and the PLL-HA multilayers should act as reservoirs for biologically active molecules.

Responsive brush layers: from tailored gradients to reversibly assembled nanoparticles

We present a condensed overview of the recent developments of novel responsive thin polymer films from end-tethered chains (polymer brushes), which are different from conventional, uniform, and planar brush layers. For this discussion, we selected two types of recently introduced surface layers: binary brush layers with variable chemical composition forming a controllable gradient of composition and properties in a selected direction and brush layers either grafted directly to inorganic nanoparticles to form hybrid core-shell structures or combined with inorganic nanoparticles embedded into this layer. Unlike traditional brush layers, such a design brings a novel set of responsive surface properties allowing for capillary-driven microfluidic motion, combinatorial-like multiplexing response, reversible aggregation and dis-assembly of nanoparticles, fabrication of ultrahydrophobic coatings, and switchable mass transport across interfaces.

Polyelectrolyte complex membranes for specific cell adhesion

The presentation of bioactive ligands on biomaterial surfaces is often confounded by the adsorption of proteins present in the biological milieu, rendering any type of cellular response nonspecific. We have engineered a polyelectrolyte complex membrane that demonstrates specific adhesion of various cell types for both two-dimensional (2D) and three-dimensional (3D) cell culture systems. Specific cell adhesion is achieved by a three-tiered structure: a silica cross-linked polycation as the bottom (first) tier, a nonfouling polyanion-poly(ethylene glycol) (PEG) conjugate as the intermediate (second) tier, and the cell-adhesion ligand as the top (third) tier. Each tier of the membrane was characterized in terms of chemical composition and dimensions. Epithelial cells (primary human cortical renal cells and a hepatocellular carcinoma cell line) cultured on the membranes exhibited little cell attachment on the polyanion-PEG second tier and good cell adhesion on the RGD-modified third tier. Thus, the second tier allowed the effect of cell adhesion due to the ligand (third tier) to be isolated and distinguished from nonspecific cell attachment to the first tier. For the culturing of cells in three dimensions, the three-tiered membrane system was applied using a highly swellable chitosan membrane as the first tier. The resulting cell-membrane construct was uniformly dispersed and centrifuged to form a matrix that interacted intimately with cells in the form of a pellet. Presentation of RGD in the latter format enhanced the viability of human mesenchymal stem cells (hMSCs) over controls without RGD.

Label-free optical detection of peptide synthesis on a porous silicon scaffold/sensor

Mesoporous porous silicon (PSi) microcavity sensors are used to conduct conventional solid-phase peptide synthesis. The sensor optical response provides a convenient means to monitor the synthesis reaction in a nondestructive manner. Measurements indicate that peptide synthesis occurs only when the PSi sensor/scaffold is amine-terminated using, for example, the amino silane or deprotected acid-labile Rink linker. Equivalent coupling efficiencies of the first amino acid to both amine terminations are observed. Kinetic studies indicate that coupling reactions are 90% complete in 1 h. Quantitative analysis of the optical response following the synthesis of homo-oligopeptides (4-mers) suggests that coupling efficiencies and/or optical thickness changes depend on the peptide length. The synthesis of the cell adhesive oligopeptide (RGD) was monitored by the optical sensor response and validated by the cell culture of primary dermal fibroblasts. Secondary ion mass spectrometry (SIMS) analysis successfully detected peptide on the silicon wafer adjacent to the PSi. Our findings suggest the potential to exploit the high surface area, efficient coupling, and intrinsic optical detection properties of PSi for label-free high-throughput screening.

Uniform deposition of protein incorporated mineral layer on three-dimensional porous polymer scaffolds

Inorganic-organic hybrid materials designed to facilitate bone tissue regeneration use a calcium phosphate mineral layer to encourage cell adhesion, proliferation, and osteogenic differentiation. Mineral formed on porous materials is often discontinuous through the thickness of the scaffold. This study aimed to uniformly coat the pores of three-dimensional (3D) porous, polymer scaffolds with a bone-like mineral layer in addition to uniformly incorporating a model protein within this mineral layer. A filtration system designed to induce simulated body fluid flow through the interstices of 3D polylactic-co-glycolic acid scaffolds (10-mm diameter x 2-mm thickness) illustrated that a uniform, continuous mineral layer can be precipitated on the pore surfaces of a 3D porous structure within 5 days. MicroCT analysis showed increased mineral volume percent (MV%) (7.86 +/- 3.25 MV%, p = 0.029) and continuous mineralization of filtered scaffolds compared with two static control groups (floating, 0.16 +/- 0.26 MV% and submerged, 0.20 +/- 0.01 MV%). Furthermore, the system was effective in coprecipitating a model protein, bone sialoprotein (BSA), within the mineral layer. A 10-fold increase in BSA incorporation was seen when coprecipitated filtered scaffolds (1308 +/- 464 microg) were compared to a submerged static control group (139 +/- 45 microg), p < 0.001. Confocal microscopy visually confirmed uniform coprecipitation of BSA throughout the thickness of the filtration scaffolds. The designed system enables 3D mineralization through the thickness of porous materials, and provides the option of including coprecipitated biomolecular cues within the mineral layer. This approach of providing a 3D conductive and osteoinductive environment could be conducive to bone tissue regeneration.

Approaches to heart valve tissue engineering scaffold design

Heart valve disease is a significant cause of mortality worldwide. However, to date, a nonthrombogenic, noncalcific prosthetic, which maintains normal valve mechanical properties and hemodynamic flow, and exhibits sufficient fatigue properties has not been designed. Current prosthetic designs have not been optimized and are unsuitable treatment for congenital heart defects. Research is therefore moving towards the development of a tissue engineered heart valve equivalent. Two approaches may be used in the creation of a tissue engineered heart valve, the traditional approach, which involves seeding a scaffold in vitro, in the presence of specific signals prior to implantation, and the guided tissue regeneration approach, which relies on autologous reseeding in vivo. Regardless of the approach taken, the design of a scaffold capable of supporting the growth of cells and extracellular matrix generation and capable of withstanding the unrelenting cardiovascular environment while forming a tight seal during closure, is critical to the success of the tissue engineered construct. This paper focuses on the quest to design, such a scaffold.

Macromolecular Monomers for the Synthesis of Hydrogel Niches and Their Application in Cell Encapsulation and Tissue Engineering

Hydrogels formed from the photoinitiated, solution polymerization of macromolecular monomers present distinct advantages as cell delivery materials and are enabling researchers to three-dimensionally encapsulate cells within diverse materials that mimic the extracellular matrix and support cellular viability. Approaches to synthesize gels with biophysically and biochemically controlled microenvironments are becoming increasingly important, and require strategies to control gel properties (e.g., degradation rate and mechanism) on multiple time and size scales. Furthermore, biological responses of gel-encapsulated cells can be promoted by hydrogel degradation products, as well as by the release of tethered biologically relevant molecules.

Tunable resistive m-dPEG acid patterns on polyelectrolyte multilayers at physiological conditions: template for directed deposition of biomacromolecules

This paper describes a new class of salt-responsive poly(ethylene glycol) (PEG) self-assembled monolayers (SAMs) on top of polyelectrolyte multilayer (PEMs) films. PEM surfaces with poly(diallyldimethylammonium chloride) as the topmost layer are chemically patterned by microcontact printing (muCP) oligomeric PEG molecules with an activated carboxylic acid terminal group (m-dPEG acid). The resistive m-d-poly(ethylene glycol) (m-dPEG) acid molecules on the PEMs films were subsequently removed from the PEM surface with salt treatment, thus converting the nonadhesive surfaces into adhesive surfaces. The resistive PEG patterns facilitate the directed deposition of various macromolecules such as polymers, dyes, colloidal particles, proteins, liposomes, and nucleic acids. Further, these PEG patterns act as a universal resist for different types of cells (e.g., primary cells, cell lines), thus permitting more flexibility in attaching a wide variety of cells to material surfaces. The patterned films were characterized by optical microscopy and atomic force microscopy (AFM). The PEG patterns were removed from the PEM surface at certain salt conditions without affecting the PEM films underneath the SAMs. Removal of the PEG SAMs and the stability of the PEM films underneath it were characterized with ellipsometry and optical microscopy. Such salt- and pH-responsive surfaces could lead to significant advances in the fields of tissue engineering, targeted drug delivery, materials science, and biology.

Use of capillary electrophoresis for polysaccharide studies and applications

Capillary electrophoresis (CE) applications to charged polysaccharides are briefly reported. A simple procedure is presented to determine the esterification degree of a hyaluronan derivative. In this case, the degree of substitution was as low as 14%. The molecular weight distribution of mannuronic oligosaccharides mixture produced by hydrolysis of native polymannuronic is readily calculated from peak area of the species resolved by CE on the basis of a specific degree of polymerization. The influence of the applied electric field strength on the free solution mobility of hyaluronan samples is briefly addressed for molar masses of the order of 10(5) and 10(6) g/mol. The data are compared with the results obtained for a 50% galactose-substituted hyaluronic acid (HA). Mobility data obtained as a function of buffer pH for a native HA sample as well as for two galactose-amide HA derivatives, having slightly different degrees of substitution, are presented and discussed in terms of the polymer charge density parameters xi. In most cases, more questions than answers arise from the application of CE to charged polysaccharides. However, perspectives are disclosed for a further understanding of the reliability of CE applied for the structural elucidation of such macromolecules.

From scrawny to brawny: the quest for neomusculogenesis; smart surfaces and scaffolds for muscle tissue engineering

The successful generation of functional muscle tissues requires both an in-depth knowledge of muscle tissue physiology and advanced engineering practices. The inherent contractile functionality of muscle is a result of its high-level cellular and matrix organization over a multitude of length scales. While there have been many attempts to produce artificial muscle, a method to fabricate a highly organized construct, comprised of multiple cell types and capable of delivering contractile strengths similar to that of native smooth, skeletal or cardiac muscle has remained elusive. This is largely due to a lack of control over phenotype and spatial organization of cells. This paper covers state-of-the-art approaches to generating both 2D and 3D substrates that provide some form of higher level organization or multiple biochemical, mechanical or electrical cues to cells in order to successfully manipulate their behavior, in a manner that is conducive to the production of contractile muscle tissue. These so-called 'smart surfaces' and 'smart scaffolds' represent vital steps towards surface-engineered substrates for the engineering of muscle tissues, showing confidently that cellular behavior can be effectively and reproducibly manipulated through the design of the physical, chemical and electrical properties of the substrates on which cells are grown. However, many challenges remain to be overcome prior to reaching the ultimate goal of fully functional 3D vascularized engineered muscle.

Biodegradable fibrous scaffolds composed of gelatin coated poly(epsilon-caprolactone) prepared by coaxial electrospinning

A facile coaxial electrospinning technique was devised to prepare biodegradable core-shell fibrous scaffolds with poly(epsilon-caprolactone) (PCL) comprising the core structure and gelatin forming the coating of the fibers. The effect of the feed rate of the inner dope on the electrospinning process and fiber morphology was investigated. The results indicated that core-shell fibers with narrow size distribution and smooth surface morphology could be obtained when the feed rate was below 8 mL/h. An increase of the feed rate resulted in analogous increase in the diameters of both the inner PCL fiber core and the entire core-shell fibers. XPS analyses revealed that the surface of the core-shell fibers was tainted with a small amount of PCL. The outer gelatin layer in the core-shell fibers was crosslinked with glutaraldehyde. By optimizing the glutaraldehyde/gelatin feed ratio, crosslinked scaffolds with high porosity were obtained. The mechanic strength of the hydrated, crosslinked core-shell fibrous scaffolds was significantly enhanced because of the presence of hydrophobic PCL in the core region of the fibers. Results of cell culture studies suggested that the crosslinked, core-shell fibrous scaffold were nontoxic and capable of supporting fibroblast adhesion and proliferation.

RGD peptides grafting onto poly(ethylene terephthalate) with well controlled densities

The aim of this study was to graft RGD peptides with well controlled densities onto poly(ethylene terephthalate) (PET) film surfaces. Biomimetic modifications were performed by means of a four-step reaction procedure: surface modification in order to create -COOH groups onto polymer surface, coupling agent grafting and finally immobilization of peptides. The originality of this work is to evaluate several grafted densities peptides. Toluidine blue and high-resolution mu-imager (using [(3)H]-Lys) were used to evaluate densities. Moreover, mu-imager has exhibited the stability of peptides grafted onto the surface when treated under harsh conditions. Benefits of the as-proposed method were related to the different concentrations of peptides grafted onto the surface as well as the capacity of RGD peptide to interact with integrin receptors.

Development of small-diameter vascular grafts

INTRODUCTION

Cardiovascular disease, including coronary artery and peripheral vascular pathologies, is the leading cause of mortality in the United States and Western countries. There is a pressing need to develop small-diameter vascular vessels for bypass surgery and other vascular reconstructive procedures. Tissue engineering offers the prospect of being able to meet the demand for replacement of diseased vessels. Significant advances have been made in recent studies and provide confidence that success is attainable. For instance, a completely cellular approach culturing cells into tissue sheets and wrapping these layers was able to form a layered cellular vascular graft with impressive strength.

METHODS/RESULTS

In our experiments, decellularization and heparin immobilization grafts from porcine tissues implanted in a canine model could be repopulated from the host cells, indicating the grafts' potential to develop into living tissues that can adapt and respond to changes in the body.

CONCLUSIONS

This review summarizes the current status of vascular grafts used clinically, updates the most recent developments on vascular tissue engineering, and discusses the challenges for the future.

Nanofabrication and Microfabrication of Functional Materials for Tissue Engineering

The burgeoning field of regenerative medicine promises significant progress in the treatment of cardiac ischemia, liver disease, and spinal cord injury. Key to its success will be the ability to engineer tissue safely and reliably. Tissue functionality must be recapitulated in the laboratory and then integrated into surrounding tissue upon transfer to the patient. Scaffolding materials must be chosen such that the microenvironment surrounding the cells is a close analog of the native environment. In the early days of tissue engineering, these materials were largely borrowed from other fields, with much of the focus on biocompatibility and biodegradation. However, attention has shifted recently to cell-cell and cell-surface interactions, largely because of enabling technologies at the nanoscale and microscale. Studies on cellular behavior in response to various stimuli are now easily realized by using microfabrication techniques and devices (e.g., biomedical microelectromechanical systems). These experiments are reproducible and moderate in cost, and often can be accomplished at high throughput, providing the fundamental knowledge required to design biomaterials that closely mimic the biological system. It is our opinion that these novel materials and technologies will bring engineered tissues one step closer to practical application in the clinic. This review discusses their application to cardiac, liver, and nerve tissue engineering.

A new approach to the rationale discovery of polymeric biomaterials

This paper attempts to illustrate both the need for new approaches to biomaterials discovery as well as the significant promise inherent in the use of combinatorial and computational design strategies. The key observation of this Leading Opinion Paper is that the biomaterials community has been slow to embrace advanced biomaterials discovery tools such as combinatorial methods, high-throughput experimentation, and computational modeling in spite of the significant promise shown by these discovery tools in materials science, medicinal chemistry and the pharmaceutical industry. It seems that the complexity of living cells and their interactions with biomaterials has been a conceptual as well as a practical barrier to the use of advanced discovery tools in biomaterials science. However, with the continued increase in computer power, the goal of predicting the biological response of cells in contact with biomaterials surfaces is within reach. Once combinatorial synthesis, high-throughput experimentation, and computational modeling are integrated into the biomaterials discovery process, a significant acceleration is possible in the pace of development of improved medical implants, tissue regeneration scaffolds, and gene/drug delivery systems.

Heterobifunctional poly(ethylene glycol)-tethered bone morphogenetic protein-2-stimulated bone marrow mesenchymal stromal cell differentiation and osteogenesis

We describe a biomimetic mode of insoluble signaling stimulation to provide target delivery of bone morphogenetic protein-2 (BMP-2), with the aim of prolonging the retention of BMP-2 use in bone tissue engineering and to enable its localized release in response to cellular activity. In our novel localization process, we used heterobifunctional acrylate-N-hydroxysuccinimide poly(ethylene glycol) (PEG) as a spacer to tether BMP-2 onto a poly(lactide-co-glycolide) scaffold. Use of PEG-tethered BMP-2 was feasible because BMP-2 retained its activity after covalent conjugation. The PEG-tethered BMP-2 conjugate sustained stimulation and retained its mitogenic activity, notably affecting pluripotent stem cell proliferation and differentiation. We seeded the scaffolds with bone marrow-derived mesenchymal stromal cells as progenitor cells to evaluate their morphology and phenotypic expression. We also created bilateral, full-thickness cranial defects in rabbits to investigate the osteogenic effect of cultured mesenchymal stromal cells on bone regeneration in vivo. Histomorphometry and histology demonstrated that the PEG-tethered BMP-2 conjugate enhanced de novo bone formation after surgery. Our work revealed the potential for biomimetic surface engineering by entrapping signaling growth factor to stimulate osteogenesis. Our technique may provide a new platform for bone-engineered stem cell therapies.

Modern biomaterials: a review - bulk properties and implications of surface modifications

This review concerns the importance of length and time on physicochemical interactions between living tissue and biomaterials that occur on implantation. The review provides information on material host interactions, materials for medical applications and cell surface interactions, and then details the extent of knowledge concerning the role(s) that surface chemistry and topography play during the first stage of implant integration, namely protein adsorption. The key points are illustrated by data from model in vitro studies. Host implant interactions begin nanoseconds after first contact and from then on are in a state of flux due to protein adsorption, cell adhesion and physical and chemical alteration of the implanted material. The many questions concerning the conformational form and control of bound proteins and how this may impact on cell adhesion in the first instance and later on cell signalling and implant integration can be answered by systematic investigations using model materials. Only then we will be in a more informed position to design new materials for use in the body.

Preparation of a Functionally Flexible, Three-Dimensional, Biomimetic Poly(L-Lactic Acid) Scaffold with Improved Cell Adhesion

Poly(L-lactic acid) (PLLA) is widely used in tissue-engineering applications because of its degradation characteristics and mechanical properties, but it possesses an inert nature, affecting cell-matrix interactions. It is desirable to modify the surface of PLLA to create biomimetic scaffolds that will enhance tissue regeneration. We prepared a functionally flexible, biomimetic scaffold by derivatizing the surface of PLLA foams into primary amines, activated pyridylthiols, or sulfhydryl groups, allowing a wide variety of modifications. Poly(L-lysine) (polyK) was physically entrapped uniformly throughout the scaffold surface and in a controllable fashion by soaking the foams in an acetone-water mixture and later in a polyK solution in dimethylsulfoxide. Arginine-glycine-aspartic acid-cysteine (RGDC) adhesion peptide was linked to the polyK via creating disulfide bonds introduced through the use of the linker N-succinimidyl-3-(2-pyridylthiol)-propionate. Presence of RGDC on the surface of PLLA 2-dimensional (2-D) disks and 3-D scaffolds increased cell surface area and the number of adherent mesenchymal stem cells. We have proposed a methodology for creating biomimetic scaffolds that is easy to execute, flexible, and nondestructive.

Defined substrates for human embryonic stem cell growth identified from surface arrays

Methods for the rapid identification of defined cell growth conditions are lacking. This deficiency is a major barrier to the investigation and application of human embryonic stem (ES) cells. To address this problem, we developed a method for generating arrays of self-assembled monolayers (SAMs) in which each element constitutes a defined surface. By screening surface arrays, we identified peptidic surfaces that support ES cell growth and self-renewal. The ability of the active surface array elements to support ES cell growth depends on their composition: both the density of the peptide presented and its sequence are critical. These findings support a role for specific surface-cell interactions. Moreover, the data from the surface arrays are portable. They can be used to design an effective 3D synthetic scaffold that supports the growth of undifferentiated human ES cells. Our results demonstrate that synthetic substrates for promoting and probing human ES cell self-renewal can be discovered through SAM surface arrays.

Stable amphoteric nanogels made of ovalbumin and ovotransferrin via self-assembly

Ovalbumin and ovotransferrin are two proteins in hen egg white with isoelectric points of 4.8 and 6.8, respectively. A convenient and green method was developed in this study to prepare ovalbumin-ovotransferrin nanogels: a mixture of the two proteins was adjusted to a certain pH and then heated. Heat induced denaturation and gelation of the proteins, but the negative charges of ovalbumin prevented the proteins from coagulating. Dynamic light scattering, transmission electron microscopy, and atomic force microscopy studies reveal the nanogels have a spherical shape in both the swell and dry forms. Their apparent hydrodynamic diameters are in the range of 100-220 nm depending on the protein concentration in the nanogel preparation process. The nanogels display an amphoteric property: they carry net positive charges at pH lower than 5.5 and net negative charges at pH higher than 5.5. They form redispersible secondary aggregates at pH 5.0-6.0. The nanogels are stable in the pH ranges of 2.0-4.0 and 7.0-11.0, and they exhibit pH unchangeable but thermoreversible hydrophobicity. Benzoic acid was used as a model drug to study the loading ability. The native ovalbumin and ovotransferrin cannot bind with benzoic acid, whereas the nanogels with the network structure and hydrophobic binding sites can load benzoic acid through hydrophobic and electrostatic interactions.

Improved Mesenchymal Stem Cell Seeding on RGD-Modified Poly(L-lactic acid) Scaffolds using Flow Perfusion

Arg-Gly-Asp (RGD) has been widely utilized to increase cell adhesion to three-dimensional scaffolds for tissue engineering. However, cell seeding on these scaffolds has only been carried out statically, which yields low cell seeding efficiencies. We have characterized, for the first time, the seeding of rat mesenchymal stem cells on RGD-modified poly(L-lactic acid) (PLLA) foams using oscillatory flow perfusion. The incorporation of RGD on the PLLA foams improves scaffold cellularity in a dose-dependent manner under oscillatory flow perfusion seeding. When compared to static seeding, oscillatory flow perfusion is the most efficient seeding technique. Cell detachment studies show that cell adhesion is dependent on the applied flow rate, and that cell attachment is strengthened at higher levels of RGD modification.

Enzyme-triggered cell attachment to hydrogel surfaces

We describe enzyme-triggered activation of cell adhesion ligands tethered to a hydrogel surface to direct the attachment of osteoblast cells on demand.

The effect of covalently immobilized rhIL-1ra-ELP fusion protein on the inflammatory profile of LPS-stimulated human monocytes

The objective of this research was to investigate whether immobilized anti-inflammatory cytokines will signal changes in the inflammatory profile of cultured monocytes. A fusion protein of recombinant human IL-1 receptor antagonist and elastin-like peptide (IL-1ra-ELP) was expressed in Escherichia coli. THP-1 human monocytes were cultured on either carboxyl-terminated self-assembled monolayers (SAMs), or SAMs with either covalently immobilized or soluble IL-1ra-ELP. LPS-stimulated monocytes exposed to either soluble or immobilized IL-1ra-ELP were prevented from cell differentiation, showed attenuated expression of pro-inflammatory cytokines, and had increased production of anti-inflammatory and pro-wound healing cytokines. These results suggest that immobilized anti-inflammatory cytokines have the potential to be immunomodulatory biomaterials.

Enzymatic formation of modular cell-instructive fibrin analogs for tissue engineering

The molecular engineering of cell-instructive artificial extracellular matrices is a powerful means to control cell behavior and enable complex processes of tissue formation and regeneration. This work reports on a novel method to produce such smart biomaterials by recapitulating the crosslinking chemistry and the biomolecular characteristics of the biopolymer fibrin in a synthetic analog. We use activated coagulation transglutaminase factor XIIIa for site-specific coupling of cell adhesion ligands and engineered growth factor proteins to multiarm poly(ethylene glycol) macromers that simultaneously form proteolytically sensitive hydrogel networks in the same enzyme-catalyzed reaction. Growth factor proteins are quantitatively incorporated and released upon cell-derived proteolytic degradation of the gels. Primary stromal cells can invade and proteolytically remodel these networks both in an in vitro and in vivo setting. The synthetic ease and potential to engineer their physicochemical and bioactive characteristics makes these hybrid networks true alternatives for fibrin as provisional drug delivery platforms in tissue engineering.

Cell adhesion and growth to Peptide-patterned supported lipid membranes

Lipid vesicles displaying RGD peptide amphiphiles were fused with glass coverslips to control the ability of these surfaces to support cell adhesion and growth. Cell adhesion was prevented on phosphatidylcholine bilayers in the absence of RGD, whereas cells adhered and grew in the presence of accessible RGD amphiphiles. This specific interaction between cells and RGD peptides was further explored in a concentration-dependent fashion by creating surface composition arrays using microfluidics. For the range of concentrations studied adhesion and growth were favored by increased peptide concentration, but this concentration dependence was found to diminish in the higher concentration regions of the array. Developing peptide composition gradients in a membrane environment is demonstrated as an effective method to screen biological probes for cell adhesion and growth.

Induction of directional sprouting angiogenesis by matrix gradients

The fate of any tissue engineering implant relies upon an adequate oxygen and nutrients supply throughout the cellular construct and, hence, by the ability of the scaffold to induce and guide vascular ingrowth. However, implant vascularization is usually an uncontrolled process that takes several weeks. In this work, we assessed the feasibility of controlling vascular sprout rate and direction within three-dimensional collagen-hyaluronic acid semi-interpenetrated networks by modulating the spatial distribution of the matricellular cues. Results indicated that increasing amount of hyaluronic acid (HA) within the matrix led to a progressive inhibition of sprouting. In HA-rich matrices, the sprout number and the propagation rate showed a 2.7- and 4-fold reduction, respectively, compared to collagen matrices. Furthermore, by creating HA gradients within the collagen network, we were able to direct and enhance the sprouting rate. This study provides an experimental platform for controlling vascularization of engineered tissues.

Primary hepatocyte survival on non-integrin-recognizable matrices without the activation of Akt signaling

The suppression of the detachment-induced cell death (anoikis) by the interaction between the cells and extracellular matrix (ECM) is necessary for the application of liver tissue engineering because the disruption of interaction with ECM leads hepatocytes to anoikis. It has been considered, in general, that integrin signal plays an important role in the hepatocyte survival although hepatocytes survive on some types of non-integrin-recognizable matrices, such as poly(N-p-vinylbenzyl-4-O-beta-D-galactopyranosyl-D-gluconamide) (PVLA) and poly-L-lysine (PLL) for several days without the serum. Anoikis was suppressed in the non-adherent culture of hepatocytes isolated from gld/gld mouse, indicating that Fas signal induces hepatocyte anoikis. Fas production is decreased in the adherent culture of hepatocytes on both integrin- and non-integrin-recognizable matrices. Akt activation was hardly observed in the adherent culture of hepatocytes on non-integrin-recognizable matrices whereas the activation occurred in the adherent culture on integrin-recognizable matrices. In the adherent culture of hepatocytes on non-integrin-recognizable matrices, Akt does not contribute to the hepatocyte survival. To prolong the viability of hepatocytes in the adherent culture on PVLA matrix on which hepatocytes maintain their functions for longer period than those on PLL matrix, it might be a good approach to activate Akt signaling pathway.

Adsorption of poly(ethylene oxide)-block-polylactide copolymers on polylactide as studied by ATR-FTIR spectroscopy

In this study, the adsorption of amphiphilic poly(ethylene oxide)-block-polylactide (mPEO-PLA) copolymers from a selective solvent onto a polylactide surface was studied as a method of polylactide surface modification and its effect on nonspecific protein adsorption was evaluated. A series of well defined mPEO-PLA copolymers was prepared to investigate the effect of copolymer composition on the resulting PEO chain density and on the surface resistance to protein adsorption. The copolymers contained PEO blocks with molecular weights ranging between 5600 and 23,800 and with 16-47 wt% of PLA. The adsorption of both the copolymers and bovine serum albumin was quantified by attenuated total reflection FTIR spectroscopy (ATR-FTIR). In addition to the adsorbed copolymer amount, its actual composition was determined. The PEO chain density on the surface was found to decrease with the molecular weight of the PEO block and to increase with the molecular weight of the PLA block. The adsorbed copolymers displayed the ability to reduce protein adsorption. The maximum reduction within the tested series (by 80%) was achieved with the copolymer containing PEO of MW 5600 and a PLA block of the same MW.

Immobilized fibrinogen in PEG hydrogels does not improve chondrocyte-mediated matrix deposition in response to mechanical stimulation

The present investigation aims to explore the role of cell-scaffold interactions and whole cell compression in chondrocyte mechanotransduction using encapsulating poly(ethylene glycol) (PEG) hydrogel scaffolds and primary bovine chondrocytes. Scaffolds made from PEG hydrogels with immobilized fibrinogen molecules were seeded with chondrocytes and subjected to 15% dynamic compressive strain at 1-Hz frequency. Dynamic strain stimulation resulted in a 37% increase in the levels of sulfated glycosaminoglycan (sGAG) after 2 weeks of stimulation, when compared to static controls. Comparing results of the PEG-fibrinogen scaffolds with their respective PEG control group did not show significant differences between the two, even following 2 weeks of dynamic mechanical stimulation. Accordingly, these findings indicate that while cell deformations cause metabolic changes in chondrocytes seeded in PEG hydrogels, it is difficult to ascertain the role of matrix bioactivity in enhancing chondrocyte mechanotransduction in encapsulating scaffolds subjected to physical deformations. This study shows how interactions between mechanical stimulation and scaffold composition are evaluated using an experimental approach and customized biomaterial scaffolds.

Recombinant protein-co-PEG networks as cell-adhesive and proteolytically degradable hydrogel matrixes. Part II: biofunctional characteristics

We present here the biological performance in supporting tissue regeneration of hybrid hydrogels consisting of genetically engineered protein polymers that carry specific features of the natural extracellular matrix, cross-linked with reactive poly(ethylene glycol) (PEG). Specifically, the protein polymers contain the cell adhesion motif RGD, which mediates integrin receptor binding, and degradation sites for plasmin and matrix-metalloproteinases, both being proteases implicated in natural matrix remodeling. Biochemical assays as well as in vitro cell culture experiments confirmed the ability of these protein-PEG hydrogels to promote specific cellular adhesion and to exhibit degradability by the target enzymes. Cell culture experiments demonstrated that proteolytic sensitivity and suitable mechanical properties were critical for three-dimensional cell migration inside these synthetic matrixes. In vivo, protein-PEG matrixes were tested as a carrier of bone morphogenetic protein (rhBMP-2) to heal critical-sized defects in a rat calvarial defect model. The results underscore the importance of fine-tuning material properties of provisional therapeutic matrixes to induce cellular responses conducive to tissue repair. In particular, a lack of rhBMP or insufficient degradability of the protein-PEG matrix prevented healing of bone defects or remodeling and replacement of the artificial matrix. This work confirms the feasibility of attaining desired biological responses in vivo by engineering material properties through the design of single components at the molecular level. The combination of polymer science and recombinant DNA technology emerges as a powerful tool for the development of novel biomaterials.

Cell responses to biomimetic protein scaffolds used in tissue repair and engineering

Basic science research in tissue engineering and regenerative medicine aims to investigate and understand the deposition, growth, and remodeling of tissues by drawing together approaches from a range of disciplines. This review discusses approaches that use biomimetic proteins and cellular therapies, both in the development of clinical products and of model platforms for scientific investigation. Current clinical approaches to repairing skin, bone, nerve, heart valves, blood vessels, ligaments, and tendons are described and their limitations identified. Opportunities and key questions for achieving clinical goals are discussed through commonly used examples of biomimetic scaffolds: collagen, fibrin, fibronectin, and silk. The key questions addressed by three-dimensional culture models, biomimetic materials, surface chemistry, topography, and their interaction with cells in terms of durotaxis, mechano-regulation, and complex spatial cueing are reviewed to give context to future strategies for biomimetic technology.

In Vivo Chondrogenesis of Mesenchymal Stem Cells in a Photopolymerized Hydrogel

BACKGROUND

Surgical options for cartilage reconstruction can be significantly improved through advances in cartilage tissue engineering, whereby functional tissue replacements are created by growing cells on polymer scaffolds. The objective of this study was to use a photopolymerizable hydrogel to implant bone marrow-derived mesenchymal stem cells subcutaneously in a minimally invasive manner and promote cartilage tissue formation by the cells in vivo.

METHODS

Athymic nude mice were injected subcutaneously with polymer solutions of poly(ethylene) oxide diacrylate containing mesenchymal stem cells and placed under a UVA lamp to transdermally photopolymerize (solidify) the injected liquid. Experimental groups included polymer solutions with hyaluronic acid (HA), transforming growth factor (TGF)-beta3, or both. After 3 weeks of implantation, cartilage formation was evaluated by gene expression analysis and histologic techniques.

RESULTS

Hyaluronic acid increased the viscosity of the polymer solutions, which helped maintain the injections at the desired site during photopolymerization. Mesenchymal stem cells in hydrogels containing both HA and TGF-beta3 produced the highest quality cartilage, based on expression of the cartilage-specific genes and production of proteoglycan and collagen II. When used independently, TGF-beta3 and HA alone induced cartilage-specific gene expression and collagen type II production; however, TGF-beta3 was essential for proteoglycan production. HA enhanced proteoglycan production when combined with TGF-beta3 and reduced expression and production of collagen I.

CONCLUSIONS

This study is the first to demonstrate the minimally invasive implantation and subsequent chondrogenic differentiation of mesenchymal stem cells in the subcutaneous environment. This lays the foundation for further optimization of a novel and practical technology for cartilage reconstruction.

Assessment of hepatocellular function within PEG hydrogels

Tissue-engineered therapies for liver failure offer the potential to augment or replace whole organ transplantation; however, fabrication of hepatic tissue poses unique challenges largely stemming from the complexity of liver structure and function. In this study, we illustrate the utility of highly-tunable, photopolymerizable poly(ethylene glycol) (PEG) hydrogels for 3D encapsulation of hepatic cells and highlight a range of techniques important for examining hepatocellular function in this platform. Owing to our long-term interest in incorporating proliferative progenitor cell types (e.g. hepatoblasts, oval cells, or cells derived from embryonic stem cells) and maintaining the phenotype of differentiated cells, we explored the behavior of bipotential mouse embryonic liver (BMEL) cells as a model progenitor cell and mature, fully differentiated, primary hepatocytes in this biomaterial system. We demonstrated the importance of cell-cell and cell-matrix interactions in the survival and function of these cell types, and the capacity to influence encapsulated cell phenotypes through modulation of hydrogel characteristics or gene silencing. Additionally, we demonstrated imaging techniques critical for the in situ assessment of encapsulated hepatocyte function combined with the ability to control cellular organization and overall architecture through microscale patterning technologies. Further analysis of liver progenitor as well as mature hepatocyte processes within the versatile PEG hydrogel platform will aid in the development of tissue engineered implantable liver systems.