Pathogen detection: A perspective of traditional methods and biosensors

Biofabricating a Silk Scaffold as a Functional Microbial Trap

Silk fibroin produced from silkworms has been intensively utilized as a scaffold material for a variety of biotechnological applications owing to its remarkable mechanical strength, extensibility, biocompatibility, and ease of biofunctionalization. In this research, we engineered silk as a novel trap platform capable of capturing microorganisms. Specifically, we first fabricated the silk material into a silk sponge by lyophilization, yielding a 3D scaffold with porous microstructures. The sponge stability in water was significantly improved by ethanol treatment with elevated β-sheet content and crystallinity of silk. Next, we biofunctionalized the silk sponge with a poly-specific microbial targeting molecule, ApoH (apolipoprotein H), to enable a novel silk-based microbial trap. The recombinant ApoH engineered with an additional penta-tyrosine was assembled onto the silk sponge through the horseradish peroxidase (HRP) mediated dityrosine cross-linking. Last, the ApoH-decorated silk sponge was demonstrated to be functional in capturing our model microorganism targets, E. coli and norovirus-like particles. We envision that this biofabricated silk platform, capable of trapping a variety of microbial entities, could serve as a versatile scaffold for rapid isolation and enrichment of microbial samples toward future diagnostics and therapeutics. This strategy, in turn, can expedite advancing future biodevices with functionality and sustainability.

Applications of CMOS Devices for the Diagnosis and Control of Infectious Diseases

Emerging infectious diseases such as coronavirus disease of 2019 (COVID-19), Ebola, influenza A, severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS) in recent years have threatened the health and security of the global community as one of the greatest factors of mortality in the world. Accurate and immediate diagnosis of infectious agents and symptoms is a key to control the outbreak of these diseases. Rapid advances in complementary metal-oxide-semiconductor (CMOS) technology offers great advantages like high accuracy, high throughput and rapid measurements in biomedical research and disease diagnosis. These features as well as low cost, low power and scalability of CMOS technology can pave the way for the development of powerful devices such as point-of-care (PoC) systems, lab-on-chip (LoC) platforms and symptom screening devices for accurate and timely diagnosis of infectious diseases. This paper is an overview of different CMOS-based devices such as optical, electrochemical, magnetic and mechanical sensors developed by researchers to mitigate the problems associated with these diseases.

A novel surface-enhanced Raman scattering (SERS) strategy for ultrasensitive detection of bacteria based on three-dimensional (3D) DNA walker

Bacteria seriously endanger human life and health, and the detection of bacteria is vital for the prevention and treatment of related diseases. Surface-enhanced Raman scattering (SERS) is considered as a powerful technique for bacterial detection due to the inherent richness of spectral data. In this work, a novel SERS strategy based on three-dimensional (3D) DNA walker was developed for quantitative analysis of Salmonella typhimurium (S. ty). The complimentary DNA of S.ty-recognizing aptamer (cApt) was replaced from the double-stranded DNA (dsDNA) of Apt@cApt in the presence of S.ty, which can trigger the endonuclease mediated "DNA walker" on the surface of gold modified magnetic nanoparticles (AuMNPs). The DNA residues on the surface of AuMNPs can bind to SERS tag through base complementary pairing, and the complex of "AuMNPs@SERS tag" can be separated from the fluid by an external magnetic field for SERS analysis. It was found that the SERS intensity showed a good linear relationship with both lower (10-10⁴ CFU/mL) and higher (10⁴-10⁶ CFU/mL) S.ty concentration. A superior limit of detection (LOD) as low as 4 CFU/mL was achieved due to the signal amplification effect of "DNA walker", and the preeminent selectivity of the proposed method was determined by the selectivity of the aptamer sequence. This strategy of separating the SERS tag from the biological matrix enables high stability and good repeatability of the SERS spectra, which presents a new method for SERS detection of biomaterials that can benefit various application scenarios.

Outer-Membrane Protease (OmpT) Based E. coli Sensing with Anionic Polythiophene and Unlabeled Peptide Substrate

E. coli and Salmonella are two of the most common bacterial pathogens involved in foodborne and waterborne related deaths. Hence, it is critical to develop rapid and sensitive detection strategies for near-outbreak applications. Reported is a simple and specific assay to detect as low as 1 CFU mL^-1 of E. coli in water within 6 hours by targeting the bacteria's surface protease activity. The assay relies on polythiophene acetic acid (PTAA) as an optical reporter and a short unlabeled peptide (LL37_FRRV ) previously optimized as a substrate for OmpT, an outer-membrane protease on E. coli. LL37_FRRV interacts with PTAA to enhance its fluorescence while also inducing the formation of a helical PTAA-LL37_FRRV construct, as confirmed by circular dichroism. However, in the presence of E. coli LL37_FRRV is cleaved and can no longer affect the conformations and optical properties of PTAA. This ability to distinguish between an intact and cleaved peptide was investigated in detail using LL37_FRRV sequence variants.

A Quantitative Bacteria Monitoring and Killing Platform Based on Electron Transfer from Bacteria to a Semiconductor

A platform with both bacteria killing and sensing capabilities is crucial for monitoring the entire bacteria-related process on biomaterials and biomedical devices. Electron transfer (ET) between the bacteria and a Au-loaded semiconductor (ZnO) is observed to be the primary factor for effective bacteria sensing and fast bacteria killing. The electrons produce a saturation current that varies linearly with the bacteria number, semi-logarithmically, with R² of 0.98825, thus providing an excellent tool to count bacteria quantitatively in real-time. Furthermore, ET leads to continuous electron loss killing of about 80% of Escherichia coli in only 1 h without light. The modularity and extendability of this ET-based platform are also demonstrated by the excellent results obtained from other semiconductor/substrate systems and the stability is confirmed by recycling tests. The underlying mechanism for the dual functions is not due to conventional attributed Zn²⁺ leaching or photocatalysis but instead electrical interactions upon direct contact. The results reveal the capability of real-time detection of bacteria based on ET while providing information about the antibacterial behavior of ZnO-based materials especially in the early stage. The concept can be readily incorporated into the design of smart and miniaturized devices that can sense and kill bacteria simultaneously.

A sandwich-type bacteriophage-based amperometric biosensor for the detection of Shiga toxin-producing Escherichia coli serogroups in complex matrices

Immuno-based biosensors are a popular tool designed for pathogen screening and detection. The current antibody-based biosensors employ direct, indirect, or sandwich detection approaches; however, instability, cross-reactivity, and high-cost render them unreliable and impractical. To circumvent these drawbacks, here we report a portable sandwich-type bacteriophage-based amperometric biosensor, which is highly-specific to various Shiga toxin-producing Escherichia coli (STEC) serogroups. Environmentally isolated and biotinylated bacteriophages were directly immobilized onto a streptavidin-coated screen-printed carbon electrode (SPCE), which recognized and captured viable target cells. Samples (50 μL) were transferred to these bacteriophage-functionalized SPCEs (12 min, room temp) before sequentially adding a bacteriophage-gold nanoparticle solution (20 μL), H2O2 (40 mM), and 1,1'-ferrocenedicarboxylic acid for amperometric tests (100 mV s-1) and analysis (ANOVA and LSD, P < 0.05). The optimum biotin concentration (10 mM) retained 94.47% bacteriophage viability. Non-target bacteria (Listeria monocytogenes and Salmonella Typhimurium) had delta currents below the threshold of a positive detection. With less than 1 h turn-around time, the amperometric biosensor had a detection limit of 10-102 CFU mL-1 for STEC O157, O26, and O179 strains and R 2 values of 0.97, 0.99, and 0.87, respectively, and a similar detection limit was observed in complex matrices, 10-102 CFU g-1 or mL-1 with R 2 values of 0.98, 0.95, and 0.76, respectively. The newly developed portable amperometric biosensor was able to rapidly detect viable target cells at low inoculum levels, thus providing an inexpensive and improved alternative to the current immuno- and laboratory-based STEC screening methods.

Fluorescent Copolymers for Bacterial Bioimaging and Viability Detection

Novel fluorescent labels with high photostability and high biocompatibility are required for microbiological imaging and detection. Here, we present a green fluorescent polymer chain (GFPC), designed to be nontoxic and water-soluble, for multicolor bioimaging and real-time bacterial viability determination. The copolymer is synthesized using a straightforward one-pot reversible addition-fragmentation chain-transfer (RAFT) polymerization technique. We show that GFPC does not influence bacterial growth and is stable for several hours in a complex growth medium and in the presence of bacteria. GFPC allows the labeling of the bacterial cytoplasm for multicolor bacterial bioimaging applications. It can be used in combination with propidium iodide (PI) to develop a rapid and reliable protocol to distinguish and quantify, in real time, by flow cytometry, live and dead bacteria.

Ratiometric fluorescence resonance energy transfer aptasensor for highly sensitive and selective detection of Acinetobacter baumannii bacteria in urine sample using carbon dots as optical nanoprobes

Development of sensitive and selective analytical method for accurate diagnosis of Acinetobacter baumannii (Ab) bacteria in biological samples is a challenge. Herein, we developed an ingenious ratiometric fluorescent aptasensor for sensitive and selective detection of (Ab) bacteria based on fluorescence resonance energy transfer (FRET) between ortho-phenylenediamines carbon dot (o-CD), nitrogen-doped carbon nanodots (NCND) as donor's species and graphene oxide (GO) as acceptor. NCND that assembled onto the edge of graphene oxide (GO) exhibited quenched photoluminescence emission, and with the absorption of the modified o-CD with aptamer (o-CD-ssDNA) onto the graphene oxide surface the fluorescence of o-CD was efficiently quenched. The aptamer (ssDNA) as a biorecognition element is bound with A. baumannii specifically which releases the o-CD-ssDNA from GO and the recovery of the fluorescence signal of o-CD, while the fluorescence intensity of NCND only slightly altered and acted as the reference signal in ratiometric fluorescence assay. The fluorescence intensity ratio (I₅₅₀ nm/I₄₄₀nm) varied from 2.0 to 10.0 with the concentration of bacteria changing from 2.0 × 10³ to 4.5 × 10⁷ cfu/mL and the low detection limit of 3.0 × 10² cfu/mL (S/N = 3). The feasibility of the developed aptasensor for selective detection of A. baumannii in urine sample with satisfactory results was also demonstrated.

Toward a nanopaper-based and solid phase immunoassay using FRET for the rapid detection of bacteria

In this study, we propose a novel sensitive solid-based immunosensor developed on a plasmonic nanopaper platform for the detection of Escherichia coli (E. coli) bacteria. This plasmonic nanopaper that comprises of carboxylated bacterial cellulose (CBC) impregnated with gold nanoparticles (AuNP-CBC), employed as a quencher and a sustainable functionalized platform to be conjugated with protein A. Thus, the conjugated protein A allows the aligned linkage of EAb-QD (anti-E. coli conjugated quantum dot) and EAb-AF (anti-E. coli conjugated Alexa Fluor 488). Interestingly, once E. coli was captured by the AuNP-CBC/EAb-QD or AuNP-CBC/EAb-AF, the energy transfer from the QD or Alexa Fluor fluorophores is triggered due to the conformational change in the antibody structure and this, in turn, causes a decrease in the distance between fluorophores and the quencher nanopaper and, therefore diminishing their photoluminescence. The immunosensors performed successfully to recognize E. coli at concentrations as low as 50 CFU mL⁻¹ in the standard buffer. The examined functionality of the immunosensors in a real matrix such as chicken extract and lettuce juice demonstrated a highly efficient response while QD is the main fluorophore with a limit of detection around 100 CFU mL⁻¹.

Gas Sensor Detecting 3-Hydroxy-2-butanone Biomarkers: Boosted Response via Decorating Pd Nanoparticles onto the {010} Facets of BiVO4 Decahedrons

The newly emerged gas sensing detection of 3-hydroxy-2-butanone (3H-2B) biomarker is deemed as an effective avenue to indirectly monitor Listeria monocytogenes (LM). However, 3H-2B sensing materials requiring critically high sensitivity and selectivity, and ppb-level detection limit, remain challenging. Here, we report the advanced gas sensors built with bismuth vanadate microdecahedron (BiVO₄ MDCD) {010} facets selectively decorated with Pd nanoparticles (Pd NPs, Pd-{010}BiVO₄ MDCDs) for boosted detection of the 3H-2B biomarker. Meanwhile, BiVO₄ MDCDs with overall facets are randomly deposited with Pd NPs (Pd-BiVO₄ MDCDs). Comparatively, Pd-{010}BiVO₄ MDCD sensors show 1 order of magnitude higher response toward the 3H-2B biomarker at 200 °C. Further, Pd-{010}BiVO₄ MDCD sensors enable to detect as low as 0.2 ppm 3H-2B and show best selectivity and stability, and fastest response and recovery. Density functional theory calculations reveal a lower adsorption energy of 3H-2B onto Pd-{010}BiVO₄ MDCDs than those of pristine and Pd-BiVO₄ MDCDs. The extraordinary Pd-{010}BiVO₄ sensing performance is ascribed to the Pd NP-assisted synergetic effect of the preferential adsorption of 3H-2B target molecules, accumulated sensing agent of ionic oxygen species, and concentrated catalysts on the {010} facets. This strategy offers rapid and noninvasive detection of LMs and is thus of great potential in the upcoming Internet of Things.

Recent advances and challenges in electrochemical biosensors for emerging and re-emerging infectious diseases

The rise of emerging infectious diseases (EIDs) as well as the increase in spread of existing infections is threatening global economies and human lives, with several countries still fighting repeated onslaught of a few of these epidemics. The catastrophic impact a pandemic has on humans and economy should serve as a reminder to be better prepared to the advent of known and unknown pathogens in the future. The goal of having a set of initiatives and procedures to tackle them is the need of the hour.

Rapid detection and point-of-care (POC) analysis of pathogens causing these diseases is not only a problem entailing the scientific community but also raises challenges in tailoring appropriate treatment strategies to the healthcare sector. Among the various methods used to detect pathogens, Electrochemical Biosensor Technology is at the forefront in the development of POC devices. Electrochemical Biosensors stand in good stead due to their rapid response, high sensitivity and selectivity and ease of miniaturization to name a few advantages.

This review explores the innovations in electrochemical biosensing based on the various electroanalytical techniques including voltammetry, impedance, amperometry and potentiometry and discusses their potential in diagnosis of emerging and re-emerging infectious diseases (Re-EIDs), which are potential pandemic threats.

•

This review offers a detailed description of the latest developments in electrochemical biosensors for emerging and re-emerging infectious diseases.

•

Advantages and limitations of various types of electrochemical biosensor techniques are demonstrated.

•

Discusses the latest electrochemical biosensors for COVID-19.

•

Challenges and future prospects of electrochemical biosensors have been discussed in this review.

Bimetallic Thin-Film Combination of Surface Plasmon Resonance-Based Optical Fiber Cladding with the Polarizing Homodyne Balanced Detection Method and Biomedical Assay Application

In this work, we present the optical birefringence properties of the optical fiber cladding that exists as an evanescent field where the refractive index (RI) of the analysis solution is applied for optical sensor aspiration. To enhance the performance of the sensor, we have investigated the sensor with different thicknesses of TiO₂ coating and bimetallic (Ag-Al) film alloy combinations by thermal evaporation coating. We described a special balanced homodyne detection method for the intensity difference change between the p- and s-polarization lights in the surface plasmon resonance sensing systems, which is strongly determined by the RI of the test medium. The plasmonic optical fiber can measure a very small change of the RI of a glycerol solution, which is a resolution of 4.37 × 10^-8 RI unit (RIU). This method has great advantages of a small-sized optical setup, high stability, high selectivity, easy chemical modification, and low cost. Furthermore, because of the experiment results, we observe that our approach can also eliminate the surrounding noise in the Mach-Zehnder interferometer, which shows the feasibility of this proposed technique. We demonstrate the fluorescence enhancement in detecting the C-reactive protein antibody conjugated with fluorescein isothiocyanate by means of near-field coupling between surface plasmons and fluorophores at spectral channels of emission. This technique can also be extended for application in a biomedical assay and in biochemical science, including molecular diagnostics relying on multichannels that require a small volume of the analyte at each channel which would suffer from the weakness of fluorescence if it were not for the enhancement technology.

Rapid Detection of Legionella pneumophila in Drinking Water, Based on Filter Immunoassay and Chronoamperometric Measurement

Legionella is a pathogenic bacterium, ubiquitous in freshwater environments and able to colonise man-made water systems from which it can be transmitted to humans during outbreaks. The prevention of such outbreaks requires a fast, low cost, automated and often portable detection system. In this work, we present a combination of sample concentration, immunoassay detection, and measurement by chronoamperometry. A nitrocellulose microfiltration membrane is used as support for both the water sample concentration and the Legionella immunodetection. The horseradish peroxidase enzymatic label of the antibodies permits using the redox substrate 3,3′,5,5′-Tetramethylbenzidine to generate current changes proportional to the bacterial concentration present in drinking water. Carbon screen-printed electrodes are employed in the chronoamperometric measurements. Our system reduces the detection time: from the 10 days required by the conventional culture-based methods, to 2–3 h, which could be crucial to avoid outbreaks. Additionally, the system shows a linear response (R² value of 0.99), being able to detect a range of Legionella concentrations between 10¹ and 10⁴ cfu·mL⁻¹ with a detection limit (LoD) of 4 cfu·mL⁻¹.

Antibody Immobilization in Zinc Oxide Thin Films as an Easy-Handle Strategy for Escherichia coli Detection

The antibody immobilization compatible with low-cost materials and label-free strategies is a challenge for biosensor device fabrication. In this study, ZnO thin film deposition was carried out on corning glass substrates by ultrasonic spray pyrolysis at 200 °C. The thin films were analyzed as platforms for enteropathogenic Escherichia coli (E. coli EPEC) antibody immobilization. The modification of thin films from the functionalization and antibody immobilization steps was visualized using Fourier transform infrared spectroscopy (FTIR) spectroscopy, and surface changes were observed by atomic force microscopy. The obtained FTIR spectra after functionalization showed a contribution of the amino group (NH₂) derived from silane (3-aminopropyltrimethoxysilane). The antibody immobilization showed an amide I conserved signal corresponding to the C=O stretching vibrations and the amide II signal related to the N-H scissor vibration mode. In this way, the signals observed are correlated with the presence of antibody immobilized on the film. The ZnO film morphology changes after every stage of the process and allows observing the antibody distribution on the immobilized surface. In order to validate the antibody recognition capability as well as the E. coli EPEC detection in situ, polymerase chain reaction was used.

2D Nanomaterial-Based Surface Plasmon Resonance Sensors for Biosensing Applications

The absorption and binding energy of material plays an important role with a large surface area and conductivity for the development of any sensing device. The newly grown 2D nanomaterials like black phosphorus transition metal dichalcogenides (TMDCs) or graphene have excellent properties for sensing devices' fabrication. This paper summarizes the progress in the area of the 2D nanomaterial-based surface plasmon resonance (SPR) sensor during last decade. The paper also focuses on the structure of Kretschmann configuration, the sensing principle of SPR, its characteristic parameters, application in various fields, and some important recent works related to SPR sensors have also been discussed, based on the present and future scope of this field. The present paper provides a platform for researchers to work in the field of 2D nanomaterial-based SPR sensors.

Selection of Specific DNA Aptamers for Hetero-Sandwich-Based Colorimetric Determination of Campylobacter jejuni in Food

Herein, a high-affinity single-stranded DNA aptamer (59 nt) against Campylobacter jejuni, defined as CJA1, was obtained using the whole-bacterium-based systemic evolution of ligands by exponential enrichment procedure. CJA1 was analyzed with a stable secondary structure and low dissociation constant (K_d) value of 1.37 ± 0.28 nM. The potential use of CJA1 was exemplified by the construction of a hetero-sandwich platform, in which C. jejuni was bound with a biotin-tagged CJA1 to perform a colorimetric reaction that is associated with visible color changes and detectable optical responses. Dependent upon this sensing platform, C. jejuni can be detected from 1.7 × 10¹ to 1.7 × 10⁶ colony-forming units (CFU)/mL. The limit of detection (LOD) is obtained as 10 CFU/mL in PBS. The specificity study showed that the sensing platform is easy to distinguish C. jejuni from other common pathogens. Moreover, the C. jejuni-contaminated milk samples can also be accurately probed (LOD = 13 CFU/mL) without sacrificing its assay abilities, indicating the promising prospect of CJA1 in the fields of biosensing and diagnostics.

What people believe about detecting infectious disease using the senses

Do you believe you can tell if people are sick with infectious diseases by looking at, listening to, or smelling them? Research on pathogen detection and avoidance suggests that perceivers respond with caution both to true signs of infection and to cues only heuristically associated with infection threat. But what do perceivers actually believe about the effectiveness and use of specific sensory modalities for infection detection? In several studies, U.S. participants reported perceptions of effectiveness and likelihood of using each of the major senses to identify infection threat in two types of targets: people and food. Results revealed prioritization of sight and sound with person targets and prioritization of sight and smell with food targets. These patterns appear consistent with the use of "safe senses" (avoidance of cues involving high perceived transmission risk). Beliefs about sensory use also varied depending on the specific feature being examined, with different patterns of sensory beliefs associated with evaluation of pathogenic danger than with evaluation of desirability and fit with normative standards. We discuss these lay beliefs in the context of recent calls for descriptive research in psychology as well as their implications for current and future work on the behavioral immune system.

Laser-Induced Graphene Electrochemical Immunosensors for Rapid and Label-Free Monitoring of Salmonella enterica in Chicken Broth

Food-borne illnesses are a growing concern for the food industry and consumers, with millions of cases reported every year. Consequently, there is a critical need to develop rapid, sensitive, and inexpensive techniques for pathogen detection in order to mitigate this problem. However, current pathogen detection strategies mainly include time-consuming laboratory methods and highly trained personnel. Electrochemical in-field biosensors offer a rapid, low-cost alternative to laboratory techniques, but the electrodes used in these biosensors require expensive nanomaterials to increase their sensitivity, such as noble metals (e.g., platinum, gold) or carbon nanomaterials (e.g., carbon nanotubes, or graphene). Herein, we report the fabrication of a highly sensitive and label-free laser-induced graphene (LIG) electrode that is subsequently functionalized with antibodies to electrochemically quantify the food-borne pathogen Salmonella enterica serovar Typhimurium. The LIG electrodes were produced by laser induction on the polyimide film in ambient conditions and, hence, circumvent the need for high-temperature, vacuum environment, and metal seed catalysts commonly associated with graphene-based electrodes fabricated via chemical vapor deposition processes. After functionalization with Salmonella antibodies, the LIG biosensors were able to detect live Salmonella in chicken broth across a wide linear range (25 to 10⁵ CFU mL^-1) and with a low detection limit (13 ± 7 CFU mL^-1; n = 3, mean ± standard deviation). These results were acquired with an average response time of 22 min without the need for sample preconcentration or redox labeling techniques. Moreover, these LIG immunosensors displayed high selectivity as demonstrated by nonsignificant response to other bacteria strains. These results demonstrate how LIG-based electrodes can be used for electrochemical immunosensing in general and, more specifically, could be used as a viable option for rapid and low-cost pathogen detection in food processing facilities before contaminated foods reach the consumer.

VOC fingerprints: metabolomic signatures of biothreat agents with and without antibiotic resistance

Category A and B biothreat agents are deemed to be of great concern by the US Centers for Disease Control and Prevention (CDC) and include the bacteria Francisella tularensis, Yersinia pestis, Burkholderia mallei, and Brucella species. Underscored by the impact of the 2020 SARS-CoV-2 outbreak, 2016 Zika pandemic, 2014 Ebola outbreak, 2001 anthrax letter attacks, and 1984 Rajneeshee Salmonella attacks, the threat of future epidemics/pandemics and/or terrorist/criminal use of pathogenic organisms warrants continued exploration and development of both classic and alternative methods of detecting biothreat agents. Volatile organic compounds (VOCs) comprise a large and highly diverse group of carbon-based molecules, generally related by their volatility at ambient temperature. Recently, the diagnostic potential of VOCs has been realized, as correlations between the microbial VOC metabolome and specific bacterial pathogens have been identified. Herein, we describe the use of microbial VOC profiles as fingerprints for the identification of biothreat-relevant microbes, and for differentiating between a kanamycin susceptible and resistant strain. Additionally, we demonstrate microbial VOC profiling using a rapid-throughput VOC metabolomics method we refer to as ‘simultaneous multifiber headspace solid-phase microextraction’ (simulti-hSPME). Finally, through VOC analysis, we illustrate a rapid non-invasive approach to the diagnosis of BALB/c mice infected with either F. tularensis SCHU S4 or Y. pestis CO92.

Thread integrated smart-phone imaging facilitates early turning point colorimetric assay for microbes

This study employs a commercial multifilament cotton thread as a low-cost microbial identification assay integrated with smartphone-based imaging for high throughput and rapid detection of pathogens. The thread device with inter-twined fibers was drop-cast with test media and a pH indicator. The target pathogens scavenge the media components with different sugars and release acidic by-products, which in turn act as markers for pH-based color change. The developed thread-based proof-of-concept was demonstrated for the visual color detection (red to yellow) of Candida albicans (≈16 hours) and Escherichia coli (≈5 hours). Besides that, using a smart-phone to capture images of the thread-based colorimetric assay facilitates early detection of turning point of the pH-based color change and further reduces the detection time of pathogens viz. Candida albicans (≈10 hours) and Escherichia coli (≈1.5 hours). The reported thread and smartphone integrated image analysis works towards identifying the turning point of the colorimetric change rather than the end-point analysis. Using this approach, the interpretation time can be significantly reduced compared to the existing conventional microbial methods (≈24 hours). The thread-based colorimetric microbial assay represents a ready-to-use, low-cost and straightforward technology with applicability in resource-constrained environments, surpassing the need for frequent fresh media preparation, expensive instrumentation, complex fabrication techniques and expert intervention. The proposed method possesses high scalability and reproducibility, which can be further extended to bio(chemical) assays.

An update on non-invasive urine diagnostics for human-infecting parasitic helminths: what more could be done and how?

Reliable diagnosis of human helminth infection(s) is essential for ongoing disease surveillance and disease elimination. Current WHO-recommended diagnostic assays are unreliable in low-endemic near-elimination settings and typically involve the invasive, onerous and potentially hazardous sampling of bodily fluids such as stool and blood, as well as tissue via biopsy. In contrast, diagnosis by use of non-invasive urine sampling is generally painless, more convenient and low risk. It negates the need for specialist staff, can usually be obtained immediately upon request and is better accepted by patients. In some instances, urine-based diagnostic assays have also been shown to provide a more reliable diagnosis of infection when compared to traditional methods that require alternative and more invasive bodily samples, particularly in low-endemicity settings. Given these relative benefits, we identify and review current research literature to evaluate whether non-invasive urine sampling is currently exploited to its full potential in the development of diagnostic tools for human helminthiases. Though further development, assessment and validation are needed before their routine use in control programmes, low-cost, rapid and reliable assays capable of detecting transrenal helminth-derived antigens and cell-free DNA show excellent promise for future use at the point-of-care in high-, medium- and even low-endemicity elimination settings.

Electrochemical biosensors for pathogen detection

Recent advances in electrochemical biosensors for pathogen detection are reviewed. Electrochemical biosensors for pathogen detection are broadly reviewed in terms of transduction elements, biorecognition elements, electrochemical techniques, and biosensor performance. Transduction elements are discussed in terms of electrode material and form factor. Biorecognition elements for pathogen detection, including antibodies, aptamers, and imprinted polymers, are discussed in terms of availability, production, and immobilization approach. Emerging areas of electrochemical biosensor design are reviewed, including electrode modification and transducer integration. Measurement formats for pathogen detection are classified in terms of sample preparation and secondary binding steps. Applications of electrochemical biosensors for the detection of pathogens in food and water safety, medical diagnostics, environmental monitoring, and bio-threat applications are highlighted. Future directions and challenges of electrochemical biosensors for pathogen detection are discussed, including wearable and conformal biosensors, detection of plant pathogens, multiplexed detection, reusable biosensors for process monitoring applications, and low-cost, disposable biosensors.

Novel surface plasmon resonance biosensor that uses full-length Det7 phage tail protein for rapid and selective detection of Salmonella enterica serovar Typhimurium

We report a novel surface plasmon resonance (SPR) biosensor that uses the full-length Det7 phage tail protein (Det7T) to rapidly and selectively detect Salmonella enterica serovar Typhimurium (S. Typhimurium). Det7T, which was obtained using recombinant protein expression and purification in Escherichia coli, demonstrated a size of ∼75 kDa upon SDS-PAGE and was homotrimeric in its native structure. Microagglutination and transmission electron microscopy (TEM) data revealed that the protein specifically bound to the host, S. Typhimurium, but not to nonhost E. coli K-12 cells. The observed protein agglutination occurred over a concentration range of 0.8-24.6 µg/mL. The Det7T proteins were immobilized on gold-coated surfaces using amine-coupling to generate a novel Det7T-functionalized SPR biosensor, wherein the specific binding of these proteins with bacteria was detected by SPR. We observed rapid detection of (∼20 Min) and typical binding kinetics with S. Typhimurium in the range of 5 × 10⁴ -5 × 10⁷  CFU/mL, but not with E. coli at any tested concentration, indicating that the sensor exhibited recognition specificity. Similar binding was observed with 10% apple juice spiked with S. Typhimurium, suggesting that this strategy provides promise for the rapid, real-time, and selective monitoring of target microorganisms in the environment, and thus has great potential for supporting health by enabling early disease prevention.

Highly sensitive and label-free digital detection of whole cell E. coli with Interferometric Reflectance Imaging

Bacterial infectious diseases are a major threat to human health. Timely and sensitive pathogenic bacteria detection is crucial in bacterial contaminations identification and preventing the spread of infectious diseases. Due to limitations of conventional bacteria detection techniques there have been concerted research efforts towards developing new biosensors. Biosensors offering label-free, whole bacteria detection are highly desirable over those relying on label-based or pathogenic molecular components detection. The major advantage is eliminating the additional time and cost required for labeling or extracting the desired bacterial components. Here, we demonstrate rapid, sensitive and label-free Escherichia coli (E. coli) detection utilizing interferometric reflectance imaging enhancement allowing visualizing individual pathogens captured on the surface. Enabled by our ability to count individual bacteria on a large sensor surface, we demonstrate an extrapolated limit of detection of 2.2 CFU/ml from experimental data in buffer solution with no sample preparation. To the best of our knowledge, this level of sensitivity for whole E. coli detection is unprecedented in label-free biosensing. The specificity of our biosensor is validated by comparing the response to target bacteria E. coli and non-target bacteria S. aureus, K. pneumonia and P. aeruginosa. The biosensor's performance in tap water proves that its detection capability is unaffected by the sample complexity. Furthermore, our sensor platform provides high optical magnification imaging and thus validation of recorded detection events as the target bacteria based on morphological characterization. Therefore, our sensitive and label-free detection method offers new perspectives for direct bacterial detection in real matrices and clinical samples.

G-quadruplex-based assay combined with aptamer and gold nanoparticles for Escherichia coli K88 determination

A colorimetric method was developed using G-quadruplex and gold nanoparticles (AuNPs) for determination of Escherichia coli K88 (ETEC K88). It was composed of two modules: (1) an aptamer as biorecognizing element and (2) a capturing DNA (modified with AuNPs at 5') as a transducer. In the absence of target bacteria, the aptamer can form stable double strands with capturing DNA, preventing the binding of capturing DNA to the G-quadruplex. However, the double strands of capturing DNA and aptamer are untied due to the stronger binding of aptamers to bacteria in the presence of target bacteria. As a result, the G-quadruplex binds to capture DNA and leads to the aggregation and color change of AuNPs, which can be monitored by a spectrophotometer or visualization. The quantitative determination was achieved by monitoring the optical density change of AuNPs solution at 524 nm after target addition. Under optimal conditions, the method has a low detection limit (1.35 × 10² CFU mL^-1) and a linear response in the range 10² to 10⁶ CFU mL^-1. Graphical abstract The manuscripts describe a colorimetric method for the detection of ETEC K88 by using intermolecular G-quadruplex to induce the agglomeration of gold nanoparticles, which can be directly used to determine the presence of bacteria with our naked eyes.

Electrochemical sensors for rapid diagnosis of pathogens in real time

Microbial infections remain the principal cause for high morbidity and mortality rates. While approximately 1400 human pathogens have been recognized, the majority of healthcare-associated infectious diseases are caused by only a few opportunistic pathogens (e.g., Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli), which are associated with increased antibiotic and antimicrobial resistance. Rapid detection, reliable identification and real-time monitoring of these pathogens remain not only a scientific problem but also a practical challenge of vast importance, especially in tailoring effective treatment strategies. Although the development of vaccinations and antibacterial drug treatments are the leading research, progress, and implementation of early warning, quantitative systems indicative of confirming pathogen presence are necessary. Over the years, various approaches, such as conventional culturing, straining, molecular methods (e.g., polymerase chain reaction and immunological assays), microscopy-based and mass spectrometry techniques, have been employed to identify and quantify pathogenic agents. While being sensitive in some cases, these procedures are costly, time-consuming, mostly qualitative, and are indirect detection methods. A great challenge is therefore to develop rapid, highly sensitive, specific devices with adequate figures of merit to corroborate the presence of microbes and enable dynamic real-time measurements of metabolism. As an alternative, electrochemical sensor platforms have been developed as powerful quantitative tools for label-free detection of infection-related biomarkers with high sensitivity. This minireview is focused on the latest electrochemical-based approaches for pathogen sensing, putting them into the context of standard sensing methods, such as cell culturing, mass spectrometry, and fluorescent-based approaches. Description of the latest, impactful electrochemical sensors for pathogen detection will be presented. Recent breakthroughs will be highlighted, including the use of micro- and nano-electrode arrays for real-time detection of bacteria in polymicrobial infections and microfluidic devices for pathogen separation analysis. We will conclude with perspectives and outlooks to understand shortcomings in designing future sensing schemes. The need for high sensitivity and selectivity, low-cost implementation, fast detection, and screening increases provides an impetus for further development in electrochemical detectors for microorganisms and biologically relevant targets.

Chitosan Stabilized Silver Nanoparticles for the Electrochemical Detection of Lipopolysaccharide: A Facile Biosensing Approach for Gram-Negative Bacteria

Negatively charged lipopolysaccharide (LPS), a major endotoxin and component of the outer membrane of several Gram-negative bacteria, provides a useful biomarker for the indirect detection of these pathogens. For instance, Escherichia coli (E. coli) is a pathogenic bacterium that causes infections in almost all age groups, and has been implicated in food and water contamination. Current diagnostic and detection methods tend to be labor-intensive or expensive, necessitating the need for an easy, sensitive, rapid, and low-cost method. We report on the synthesis and use of positively charged chitosan stabilized silver nanoparticles (Chi-AgNPs) as a sensitive electrochemical nanobiosensor for the detection of LPS. Chi-AgNPs were synthesized through a facile, single step protocol, and characterized for size, charge, and morphology. Glassy carbon electrodes modified with Chi-AgNPs resulted in an enhancement of signal in the presence of both LPS and E. coli. Detection was accomplished over a large concentration range (several orders of magnitude) of 0.001–100 ng/mL and 10–10⁷ CFU/mL. The biosensors can reliably detect LPS and E. coli at very low concentrations. Chi-AgNPs have potential as low cost, sensitive nanobiosensors for Gram-negative bacteria due to strong electrostatic interaction with LPS present in their outer membranes.

A Comprehensive Review: Materials for the Fabrication of Optical Fiber Refractometers Based on Lossy Mode Resonance

Lossy mode resonance based sensors have been extensively studied in recent years. The versatility of the lossy mode resonance phenomenon has led to the development of sensors based on different configurations that make use of a wide range of materials. The coating material is one of the key elements in the performance of a refractometer. This review paper intends to provide a global view of the wide range of coating materials available for the development of lossy mode resonance based refractometers.

Applications of Nanotechnology in Sensor-Based Detection of Foodborne Pathogens

The intake of microbial-contaminated food poses severe health issues due to the outbreaks of stern food-borne diseases. Therefore, there is a need for precise detection and identification of pathogenic microbes and toxins in food to prevent these concerns. Thus, understanding the concept of biosensing has enabled researchers to develop nanobiosensors with different nanomaterials and composites to improve the sensitivity as well as the specificity of pathogen detection. The application of nanomaterials has enabled researchers to use advanced technologies in biosensors for the transfer of signals to enhance their efficiency and sensitivity. Nanomaterials like carbon nanotubes, magnetic and gold, dendrimers, graphene nanomaterials and quantum dots are predominantly used for developing biosensors with improved specificity and sensitivity of detection due to their exclusive chemical, magnetic, mechanical, optical and physical properties. All nanoparticles and new composites used in biosensors need to be classified and categorized for their enhanced performance, quick detection, and unobtrusive and effective use in foodborne analysis. Hence, this review intends to summarize the different sensing methods used in foodborne pathogen detection, their design, working principle and advances in sensing systems.

Gold Nanoclusters for Bacterial Detection and Infection Therapy

Infections caused by antibiotic-resistant bacteria have become one of the most serious global public health crises. Early detection and effective treatment can effectively prevent deterioration and further spreading of the bacterial infections. Therefore, there is an urgent need for time-saving diagnosis as well as therapeutically potent therapy approaches. Development of nanomedicine has provided more choices for detection and therapy of bacterial infections. Ultrasmall gold nanoclusters (Au NCs) are emerging as potential antibacterial agents and have drawn intense attention in the biomedical fields owing to their excellent biocompatibility and unusual physicochemical properties. Recent significant efforts have shown that these versatile Au NCs also have great application potential in the selective detection of bacteria and infection treatment. In this review, we will provide an overview of research progress on the development of versatile Au NCs for bacterial detection and infection treatment, and the mechanisms of action of designed diagnostic and therapeutic agents will be highlighted. Based on these cases, we have briefly discussed the current issues and perspective of Au NCs for bacterial detection and infection treatment applications.

Electrochemical immunoassay for the detection of stress biomarkers

A rapid electrochemical immunoassay method was developed to detect and measure stress biomarkers (cortisol and cortisone) in two biological samples (Zebrafish whole-body and artificial saliva). This methodology utilizes an immunoassay approach taking advantage of the lock and key mechanism that is related to the antibody-antigen interaction depending on the reliable immobilization of the antibody labelled with ferrocene tags (Ab-Fc) on a modified tin-doped indium oxide (ITO) electrode using electrochemical instrumentation to build a POC platform. The limit of detection (LOD) obtained for this biosensor was 1.03 pg ml⁻¹ for cortisol and 0.68 pg ml⁻¹ for cortisone, respectively. The correlation coefficient was 0.9852 and 0.9841 for cortisol and cortisone, respectively with a linear concentration from (0-50 ng ml⁻¹) which covers the standard levels of stress hormones in both selected biological samples. The incubation time was investigated and 30 min was found to be the optimum incubation time. This time would be acceptable for the POC system as total process time can be determined within 35 min.

Design and Fabrication of a Conductometry System for Fast Detection of Pathogenic Bacteria in Human Urine

Background: Common methods for identifying the infectious bacteria in human urine are mainly time-consuming and costly. Therefore, the most reliable method for detecting the urinary tract infections is the urine culture, which requires at least 48 hours to identify infectious factors. Objectives: It is important to detect the bacteria in urine rapidly, simply, and accurately. Materials and Methods: In this work, the variations in the electrical conductivity and dielectric coefficient of the urine sample due to changes in the concentration of infectious bacteria have been studied. Furthermore, an appropriate measurement system was prepared for impedancemetry and conductometry. Results: We showed that the detection time was reduced to about an hour. Finally, the accuracy of the device for diagnosis and precision of measurement were evaluated and compared by the detection method for bacterial culture. Conclusion: In this work, the detection time was reduced to about 1 hour.

Passivated-electrode insulator-based dielectrophoretic separation of heterogeneous cell mixtures

Rapid and accurate purification of various heterogeneous mixtures is a critical step for a multitude of molecular, chemical, and biological applications. Dielectrophoresis has shown to be a promising technique for particle separation due to its exploitation of the intrinsic electrical properties, simple fabrication, and low cost. Here, we present a geometrically novel dielectrophoretic channel design which utilizes an array of localized electric fields to separate a variety of unique particle mixtures into distinct populations. This label-free device incorporates multiple winding rows with several nonuniform structures on to sidewalls to produce high electric field gradients, enabling high locally generated dielectrophoretic forces. A balance between dielectrophoretic forces and Stokes' drag is used to effectively isolate each particle population. Mixtures of polystyrene beads (500 nm and 2 μm), breast cancer cells spiked in whole blood, and for the first time, neuron and satellite glial cells were used to study the separation capabilities of the design. We found that our device was able to rapidly separate unique particle populations with over 90% separation yields for each investigated mixture. The unique architecture of the device uses passivated-electrode insulator-based dielectrophoresis in an innovative microfluidic device to separate a variety of heterogeneous mixture without particle saturation in the channel.

ZnO Nanolower-Based NanoPCR as an Efficient Diagnostic Tool for Quick Diagnosis of Canine Vector-Borne Pathogens

Polymerase chain reaction (PCR) is a unique technique in molecular biology and biotechnology for amplifying target DNA strands, and is also considered as a gold standard for the diagnosis of many canine diseases as well as many other infectious diseases. However, PCR still faces many challenges and issues related to its sensitivity, specificity, efficiency, and turnaround time. To address these issues, we described the use of unique ZnO nanoflowers in PCR reaction and an efficient ZnO nanoflower-based PCR (nanoPCR) for the molecular diagnosis of canine vector-borne diseases (CVBDs). A total of 1 mM of an aqueous solution of ZnO nanoflowers incorporated in PCR showed a significant enhancement of the PCR assay with respect to its sensitivity and specificity for the diagnosis of two important CVBDs, Babesia canis vogeli and Hepatozoon canis. Interestingly, it drastically reduced the turnaround time of the PCR assay without compromising the yield of the amplified DNA, which can be of benefit for veterinary practitioners for the improved management of diseases. This can be attributed to the favorable adsorption of ZnO nanoflowers to the DNA and thermal conductivity of ZnO nanoflowers. The unique ZnO nanoflower-assisted nanoPCR greatly improved the yield, purity, and quality of the amplified products, but the mechanism behind these properties and the effects and changes due to the different concentrations of ZnO nanoflowers in the PCR system needs to be further studied.

Noble Metal-Assisted Surface Plasmon Resonance Immunosensors

For the early diagnosis of several diseases, various biomarkers have been discovered and utilized through the measurement of concentrations in body fluids such as blood, urine, and saliva. The most representative analytical method for biomarker detection is an immunosensor, which exploits the specific antigen-antibody immunoreaction. Among diverse analytical methods, surface plasmon resonance (SPR)-based immunosensors are emerging as a potential detection platform due to high sensitivity, selectivity, and intuitive features. Particularly, SPR-based immunosensors could detect biomarkers without labeling of a specific detection probe, as typical immunosensors such as enzyme-linked immunosorbent assay (ELISA) use enzymes like horseradish peroxidase (HRP). In this review, SPR-based immunosensors utilizing noble metals such as Au and Ag as SPR-inducing factors for the measurement of different types of protein biomarkers, including viruses, microbes, and extracellular vesicles (EV), are briefly introduced.

Pathogenic Escherichia coli (E. coli) detection through tuned nanoparticles enhancement study

OBJECTIVE

This study aims to detect pathogenic Escherichia coli (E. coli) bacteria using non-destructive fluorescence microscopy and micro-Raman spectroscopy.

RESULTS

Raman vibrational spectroscopy provides additional information regarding biochemical changes at the cellular level. We have used two nanomaterials zinc oxide nanoparticles (ZnO-NPs) and gold nanoparticles (Au-NPs) to detect pathogenic E. coli. The scanning electron microscope (SEM) with energy dispersive X-ray (EDAX) spectroscopy exhibit surface morphology and the elemental composition of the synthesized NPs. The metal NPs are useful contrast agents due to the surface plasmon resonance (SPR) to detect the signal intensity and hence the bacterial cells. The changes due to the interaction between cells and NPs are further correlated to the change in the surface charge and stiffness of the cell surface with the help of the fluorescence microscopic assay.

CONCLUSIONS

We conclude that when two E. coli strains (MTCC723 and MTCC443) and NPs are respectively mixed and kept overnight, the growth of bacteria are inhibited by ZnO-NPs due to changes in cell membrane permeability and intracellular metabolic system under fluorescence microscopy. However, SPR possessed Au-NPs result in enhanced fluorescence of both pathogens. In addition, with the help of Raman microscopy and element analysis, significant changes are observed when Au-NPs are added with the two strains as compared to ZnO-NPs due to protein, lipid and DNA/RNA induced conformational changes.

An in situ-Synthesized Gene Chip for the Detection of Food-Borne Pathogens on Fresh-Cut Cantaloupe and Lettuce

Fresh foods are vulnerable to foodborne pathogens which cause foodborne illness and endanger people's life and safety. The rapid detection of foodborne pathogens is crucial for food safety surveillance. An in situ-synthesized gene chip for the detection of foodborne pathogens on fresh-cut fruits and vegetables was developed. The target genes were identified and screened by comparing the specific sequences of Salmonella Typhimurium, Vibrio parahemolyticus, Staphylococcus aureus, Listeria monocytogenes, and Escherichia coli O157:H7 from the National Center for Biotechnology Information database. Tiling array probes were designed to target selected genes in an optimized hybridization system. A total of 141 specific probes were selected from 3,227 hybridization probes, comprising 26 L. monocytogenes, 24 S. aureus, 25 E. coli O157:H7, 20 Salmonella Typhimurium, and 46 V. parahemolyticus probes that are unique to this study. The optimized assay had strong amplification signals and high accuracy. The detection limit for the five target pathogens on fresh-cut cantaloupe and lettuce was approximately 3 log cfu/g without culturing and with a detection time of 24 h. The detection technology established in this study can rapidly detect and monitor the foodborne pathogens on fresh-cut fruits and vegetables throughout the logistical distribution chain, i.e., processing, cleaning, fresh-cutting, packaging, storage, transport, and sale, and represents a valuable technology that support the safety of fresh agricultural products.

Functional Nanomaterials for the Detection and Control of Bacterial Infections

Infections with multidrug-resistant bacteria that are difficult to treat with commonly used antibiotics have spread globally, raising serious public health concerns. Conventional bacterial detection techniques are time-consuming, which may delay treatment for critically ill patients past the optimal time. There is an urgent need for rapid and sensitive diagnosis and effective treatments for multidrug-resistant pathogenic bacterial infections. Advances in nanotechnology have made it possible to design and build nanomaterials with therapeutic and diagnostic capabilities. Functional nanomaterials that can specifically interact with bacteria offer additional options for the diagnosis and treatment of infections due to their unique physical and chemical properties. Here, we summarize the recent advances related to the preparation of nanomaterials and their applications for the detection and treatment of bacterial infection. We pay particular attention to the toxicity of therapeutic nanoparticles based on both in vitro and in vivo assays. In addition, the major challenges that require further research and future perspectives are briefly discussed.