Anthraquinone-based intramolecular charge-transfer compounds: computational molecular design, thermally activated delayed fluorescence, and highly efficient red electroluminescence

Highly Efficient Deep-Red Non-Doped Diodes Based on a T-Shape Thermally Activated Delayed Fluorescence Emitter

Device simplification is of practical significance for organic light emitting diodes (OLEDs), and remains the great challenge for deep-red emitters. Herein, a deep-red thermally activated delayed fluorescence molecule (pTPA-DPPZ) is reported which features a T shaped structure containing two triphenylamine (TPA) donors, one either side of a planar dipyridophenazine (DPPZ) acceptor. The rational spatial arrangement of the functional groups leads to limited but sufficient molecular packing for effective carrier transport. The neat pTPA-DPPZ film achieves an around 90-fold improved radiation rate constant of 10⁷  s^-1 and the nearly unitary reverse intersystem crossing (RISC) efficiency, as well as accelerated emission decays for quenching suppression. The high radiation and RISC result in a photoluminescence quantum yield of 87 %. The bilayer OLED based on the pTPA-DPPZ emissive layer achieved the record external quantum efficiencies of 12.3 % for maximum and 10.4 % at 1000 nits, accompanied by the deep-red electroluminescence with the excellent color purity.

Preparation and photophysical properties of quinazoline-based fluorophores

The donor-acceptor design is a classic method of synthesizing new fluorescent molecules. In this study, a series of new fluorescent compounds (1-10) were synthesized based on 2-(3,5-bis(trifluoromethyl)phenyl)-quinazoline acceptor and various amino donors. The fluorescent emissions of 1-10 cover the spectrum from 414 nm to 597 nm in cyclohexane solutions with various amino donors on 4- or 7-positions of quinazoline. Ultimately, compounds 1 and 2 presented the highest photoluminescence quantum yield (QY) over 80%, while compound 10 provided the largest Stokes shift (161 nm) in cyclohexane. Most of them have strong emissions in aggregated states such as in nanoparticles, in powders, in crystals and in films. Mechanochromic properties were observed for compounds 1, 2, 4 and 7. Furthermore, blue OLEDs were fabricated by using compound 2 or 7 as the active layer.

High Fluorescence Rate of Thermally Activated Delayed Fluorescence Emitters for Efficient and Stable Blue OLEDs

A lack of an efficient and stable blue device is a critical factor restricting the development of organic light-emitting diode (OLED) technology that is currently expected to be overcome by employing thermally activated delayed fluorescence (TADF). Here, we investigate the TADF and electroluminescence (EL) performance of six carbazole/triphenyltriazine derivatives in different hosts. A good linearity between lg(LT50/k_F²) and the EL emission wavelength is found, where LT50 is the half-life of the devices and k_F is the fluorescence rate of the emitters, suggesting the dominance of the singlet exciton energy and lifetime in device stability. An indolylcarbazole/triphenyltriazine derivative (ICz-TRZ) with the capability to suppress solid-state solvation exhibits blue-shifted emission and an increased k_F (1.5 × 10⁸ s^-1) in comparison to the control emitters in doped films. ICz-TRZ-based devices achieve a maximum external quantum efficiency (EQE) of 18% and an EQE of 5.5% at a very high luminance of 7 × 10⁴ cd/m². Ignoring the poor electrochemical stability of ICz-TRZ, the device offers an LT50 approaching 100 h under an initial luminance of 1000 cd/m² and CIE coordinates of (0.14, 0.19). The findings in this work suggest that computer-aided design of high k_F TADF emitters can be an approach to realize efficient and stable blue OLEDs.

Dual-Mode Detection of Bacterial 16S Ribosomal RNA in Tissues

The specific detection of pathogens has long been recognized as a vital strategy for controlling bacterial infections. Herein, a novel hydrophilic aromatic-imide-based thermally activated delayed fluorescence (TADF) probe, AI-Cz-Neo, is designed and synthesized by the conjugation of a TADF emitter with a bacterial 16S ribosomal RNA-targeted moiety, neomycin. Biological data showed for the first time that AI-Cz-Neo could be successfully applied for the dual-mode detection of bacterial 16S rRNA using confocal fluorescence imaging and time-resolved fluorescence imaging (TRFI) in both cells and tissues. These findings greatly expand the application of TADF fluorophores in time-resolved biological imaging and provide a promising strategy for the precise and reliable diagnosis of bacterial infections based on the dual-mode imaging of bacterial 16S rRNA by fluorescence intensity and fluorescence lifetime.

Delayed Fluorescence, Room Temperature Phosphorescence, and Mechanofluorochromic Naphthalimides: Differential Imaging of Normoxia and Hypoxia Live Cancer Cells

We study the effect of molecular conformation on the electronic coupling between the donor amines and acceptor 1,8-naphthalimide (NPI) in a series of D-A systems 1-4 (A = NPI; D = phenothiazine, phenoxazine, carbazole, diphenylamine, respectively, for 1, 2, 3, and 4). Weakly coupled systems show dual emission in the solution state, while strongly coupled systems show single emission bands. The energy of transitions and photoluminescence (PL) quantum yield are sensitive to the molecular conformation and donor strength. These compounds show delayed emission in the solutions and aggregated state and phosphorescence in the solid state. Compounds 3 and 4 with weak donors exhibit intermolecular slipped π···π interactions in the solid state and consequently exhibit dual (intra- and inter-) phosphorescence at low temperature. Steady state and time-resolved PL studies at variable temperature together with computational and crystal structure analysis were used to rationalize the optical properties of these compounds. The delayed emission of these compounds is sensitive to molecular oxygen; accordingly, these molecules are utilized for differential imaging of normoxia and hypoxia cancer cells.

Diboron-Based Delayed Fluorescent Emitters with Orange-to-Red Emission and Superior Organic Light-Emitting Diode Efficiency

For the application of organic light-emitting diodes (OLEDs) in lighting and panels, the basic requirement is to include a full spectrum color range. Compared with the development of blue and green luminophores in thermally activated delayed fluorescence (TADF) technology, the progress of orange-to-red materials is slow and needs further investigation. In this study, three diboron compound-based materials, dPhADBA, dmAcDBA, and SpAcDBA, were designed and synthesized by nucleophilic arylation of three amine donors on 9,10-diboraanthracene (DBA) in a two-step reaction. With increasing electron-donating ability, they show orange-to-red emission with TADF characteristics. The electroluminescence of these diboron compounds exhibits emissions λ_max at 613, 583, and 567 nm for dPhADBA, dmAcDBA, and SpAcDBA, respectively. It is noteworthy that the rod-like D-A-D structures can achieve high horizontal ratios (84-86%) and outstanding device performance for orange-to-red TADF OLEDs: the highest external quantum efficiencies for dPhADBA, dmAcDBA, and SpAcDBA are 11.1 ± 0.5, 24.9 ± 0.5, and 30.0 ± 0.8%, respectively. Therefore, these diboron-based molecules offer a promising avenue for the design of orange-to-red TADF emitters and the development of highly efficient orange-to-red OLEDs.

Saturated Red Electroluminescence From Thermally Activated Delayed Fluorescence Conjugated Polymers

Two sets of conjugated polymers with anthraquinone groups as pendant acceptors were designed and synthesized. The acceptor is tethered to an diphenylamine group via a phenylene bridge, constructing a thermally activated delayed fluorescence (TADF) unit, which is embedded into the polymer backbone through its donor fragment, while the backbone is composed of dibenzothiophene-S, S-dioxide and 2, 7-fluorene or 2, 7-carbazole groups. The polymers show distinct TADF characteristics, confirmed by transient photoluminescence spectra and theoretical calculations. The carbazole-based polymers exhibit shorter delay lifetimes and lower energy emission relative to the fluorene-based polymers. The non-doped organic light-emitting diodes fabricated via solution processing approach produce efficient red emissions with the wavelengths of 625-646 nm. The carbazole containing polymer with 2% molar content of the TADF unit exhibits the best maximum external quantum efficiency of 13.6% and saturated red electroluminescence with the Commission Internationale de l'Eclairage coordinates of (0.62, 0.37).

Imidazo[1,2-b]pyridazine as Building Blocks for Host Materials for High-Performance Red-Phosphorescent Organic Light-Emitting Devices

A novel electron-transporting unit, imidazo [1,2-b]pyridazine (IP), was first reported for developing host materials. The IP moiety possesses excellent electron-transporting ability and great thermal stability. Using carbazole as p-type units and IP as n-type units, several bipolar host materials, namely, IP6Cz, IP68Cz, IP36Cz, and IP368Cz, were developed through altering the substitution site of the IP core. Among these four materials, 6-site-substituted IP6Cz and 6,8-site-substituted IP68Cz exhibit the best electroluminescence (EL) performance. IP6Cz- and IP68Cz-based red phosphorescent organic light-emitting diodes using Ir(pq)₂acac as the emitter exhibit extremely high EL efficiency with the maximum external quantum efficiency (η_ext,max) of 26.9 and 25.2% and an insignificant efficiency roll-off. Moreover, IP6Cz- and IP68Cz-based deep-red devices doped by Ir(piq)₂acac also show satisfactory EL performance with a η_ext,max of 20.5 and 19.9%, respectively. The influence of different substitution sites of the IP core on the photophysical and electrochemical properties was systematically investigated. This study demonstrates that IP could be a first-rate electron-transporting unit for bipolar materials for red-emitting devices.

1,8-Naphthalimide-Based Polymers Exhibiting Deep-Red Thermally Activated Delayed Fluorescence and Their Application in Ratiometric Temperature Sensing

A series of naphthalimide (NAI)-based red-emissive thermally activated delayed fluorescence (TADF) acrylic monomers has been designed and synthesized. When copolymerized with a host material by Cu(0)-reversible deactivation radical polymerization (Cu(0)-RDRP), polymers exhibiting orange to deep-red TADF were obtained with quantum yields of up to 58% in solution and 31% in the solid state. These emitters exhibit dual emission consisting of high-energy prompt fluorescence from the NAI acceptor (λ_max = 340 nm in toluene) and red-delayed fluorescence from the charge-transfer process (λ_max = 633-711 nm in toluene). This dual emissive property was utilized to create red-to-blue temperature-responsive polymers by copolymerization of NAI-DMAC with N-isopropylacrylamide and a blue fluorescent dopant. These polymers exhibit red TADF at room temperature and blue fluorescence at 70 °C, with a high ratiometric fluorescent thermal response of 32 ± 4% K^-1. Such systems are anticipated to have utility in bioimaging, drug delivery, and temperature sensing, further expanding the range of applications for red TADF materials.

Rational Molecular Design of Highly Efficient Yellow-Red Thermally Activated Delayed Fluorescent Emitters: A Combined Effect of Auxiliary Fluorine and Rigidified Acceptor Unit

Molecular design strategies are crucial to develop highly efficient and long-wavelength thermally activated delayed fluorescent (TADF) emitters because the inherent limitation of the energy gap law degrades the efficiency of the red or orange TADF emitters. To resolve the low efficiency issue, we designed and synthesized two TADF emitters, 4,4'-(6-(9,9-dimethylacridin-10(9H)-yl)-7-fluoroquinoxaline-2,3-diyl)dibenzonitrile (FDQCNAc) and 11-(9,9-dimethylacridin-10(9H)-yl)-12-fluorodibenzo[a,c]phenazine-3,6-dicarbonitrile (FBPCNAc), by utilizing fluorine and peripheral cyano-substituted quinoxaline and phenazine acceptors of 4,4'-(6-fluoroquinoxaline-2,3-diyl)dibenzonitrile (FDQCN) and 11-fluorodibenzo[a,c]phenazine-3,6-dicarbonitrile (FBPCN), respectively. A fluorine atom at the ortho position of the acridine donor acts as an auxiliary acceptor to minimize the singlet-triplet energy gap (ΔE_ST) below 0.1 eV and promotes the reverse intersystem crossing (RISC) process. Organic light-emitting diodes (OLEDs) fabricated with FDQCNAc and FBPCNAc emitters demonstrated high external quantum efficiencies (EQEs) of 27.6 and 23.8% in the yellow-red TADF OLEDs, respectively. In particular, the combination of the F auxiliary acceptor unit and the rigidified FBPCN acceptor unit enabled red-shifted emission by about 58 nm without much sacrifice of the EQE in the red region.

Understanding and Designing Thermally Activated Delayed Fluorescence Emitters: Beyond the Energy Gap Approximation

In this article recent progress in the development of molecules exhibiting Thermally Activated Delayed Fluorescence (TADF) is discussed with a particular focus upon their application as emitters in highly efficient organic light emitting diodes (OLEDs). The key aspects controlling the desirable functional properties, e. g. fast intersystem crossing, high radiative rate and unity quantum yield, are introduced with a particular focus upon the competition between the key requirements needed to achieve high performance OLEDs. The design rules required for organic and metal organic materials are discussed, and the correlation between them outlined. Recent progress towards understanding the influence of the interaction between a molecule and its environment are explained as is the role of the mechanism for excited state formation in OLEDs. Finally, all of these aspects are combined to discuss the ability to implement high level design rules for achieving higher quality materials for commercial applications. This article highlights the significant progress that has been made in recent years, but also outlines the significant challenges which persist to achieve a full understanding of the TADF mechanism and improve the stability and performance of these materials.

Management of Delayed Fluorophor-Sensitized Exciton Harvesting for Stable and Efficient All-Fluorescent White Organic Light-Emitting Diodes

White organic light-emitting diodes (WOLEDs) using thermally activated delayed fluorescence (TADF)-based single emissive layer (SEL) have attracted enormous attention because of their simple device structure and full exciton utilization potential for high efficiency. However, WOLEDs made of an all-TADF SEL usually exhibit serious efficiency roll-off and poor color stability due to serious exciton-annihilation and unbalanced radiative decays of different TADF emitters. Herein, a new strategy is proposed to manipulate the TADF-sensitized fluorescence process by combining dual-host systems of high triplet energy with a conventional fluorescent emitter of complementary color. The multiple energy-funneling paths are modulated and short-range Dexter energy transfer is largely suppressed due to the steric effect of peripheral tert-butyl group in the blue TADF sensitizer. The resulting all-fluorescent WOLEDs achieve an unprecedentedly high external quantum efficiency of 21.8% with balanced white emission of Commission Internationale de l'Eclairage coordinate of (0.292, 0.343), accompanied with good color stability, reduced efficiency roll-off, and prolonged operational lifetime. These findings demonstrate the validity of this strategy for precisely allocating the exciton harvesting in SEL WOLEDs.

Achieving 21% External Quantum Efficiency for Nondoped Solution-Processed Sky-Blue Thermally Activated Delayed Fluorescence OLEDs by Means of Multi-(Donor/Acceptor) Emitter with Through-Space/-Bond Charge Transfer

Although numerous thermally activated delayed fluorescence (TADF) organic light-emitting diodes (OLEDs) have been demonstrated, efficient blue or even sky-blue TADF-based nondoped solution-processed devices are still very rare. Herein, through-space charge transfer (TSCT) and through-bond charge transfer (TBCT) effects are skillfully incorporated, as well as the multi-(donor/acceptor) characteristic, into one molecule. The former allows this material to show small singlet-triplet energy splitting (ΔE ST) and a high transition dipole moment. The latter, on the one hand, further lights up multichannel reverse intersystem crossing (RISC) to increase triplet exciton utilization via degenerating molecular orbitals. On the other hand, the nature of the molecular twisted structure effectively suppresses intermolecular packing to obtain high photoluminescence quantum yield (PLQY) in neat flims. Consequently, using this design strategy, T-CNDF-T-tCz containing three donor and three acceptor units, successfully realizes a small ΔE ST (≈0.03 eV) and a high PLQY (≈0.76) at the same time; hence the nondoped solution-processed sky-blue TADF-OLED displays record-breaking efficiency among the solution process-based nondoped sky-blue OLEDs, with high brightness over 5200 cd m-2 and external quantum efficiency up to 21.0%.

Investigation of Thermally Activated Delayed Fluorescence from a Donor-Acceptor Compound with Time-Resolved Fluorescence and Density Functional Theory Applying an Optimally Tuned Range-Separated Hybrid Functional

Emitters showing thermally activated delayed fluorescence (TADF) in electroluminescent devices rely on efficient reverse intersystem crossing (rISC) arising from small thermal activation barriers between the lowest excited triplet and singlet manifolds. A small donor-acceptor compound consisting of a demethylacridine donor and a methylbenzoate acceptor group is used as a model TADF emitter. The spectroscopic signatures of this system are characterized using a combination of photoluminescence and photoluminescence excitation, and the photoluminescence decay dynamics are recorded between delays of 2 ns and 20 ms. Above T = 200 K, our data provide convincing evidence for TADF at intermediate delays in the microsecond range, whereas triplet-triplet annihilation and slow triplet decay at later times can be observed over the entire temperature range from T = 80 K to room temperature. Moreover, close to room temperature, we find a second and faster up-conversion mechanism, tentatively assigned to reverse internal conversion between different triplet configurations. An interpretation of these experimental findings requires a calculation of the deformation patterns and potential minima of several electronic configurations. This task is performed with a range-separated hybrid functional, outperforming standard density functionals or global hybrids. In particular, the systematic underestimation of the energy of charge transfer (CT) states with respect to local excitations within the constituting chromophores is replaced by more reliable transition energies for both kinds of excitations. Hence, several absorption and emission features can be assigned unambiguously, and the observed activation barriers for rISC and reverse internal conversion correspond to calculated energy differences between the potential surfaces in different electronic configurations.

Efficient and Stable Organic Light-Emitting Diodes Employing Indolo[2,3-b]indole-Based Thermally Activated Delayed Fluorescence Emitters

Triplet excitons can be effectively harvested in organic light-emitting diodes employing thermally activated delayed fluorescence (TADF) molecules as the emitter and host. A design strategy for blue and green emitters with small S₁-T₁ splitting (ΔE_ST) is to construct a donor-acceptor (D-A) type molecule with moieties combining a high T₁ level with a strong electron-donating/withdrawing character. Here, we report a new kind of TADF emitter with an indolo[2,3-b]indole (IDID) donor. In comparison to other reported indolocarbazole and indoloindole donors, IDID has a higher T₁ level, which is comparable to that of the classical donor 9,9-dimethyl-9,10-dihydroacridine (DMAC) for blue TADF emitters. The sky-blue and green TADF emitters based on the IDID donor and a phenyltriazine acceptor exhibit high photoluminescence quantum yields (0.78-0.92) and short TADF lifetimes (1.1-1.7 μs) in doped films. Devices employing these IDID-based emitters offer an external quantum efficiency of 19.2%, which is comparable to that obtained for a device employing an analogous compound with a DMAC donor, while the stability of the former is higher than that of the latter owing to the just-right D-A twisting angles (∼59°) in the IDID-based emitters leading to a balance between ΔE_ST and the fluorescence rate. The utilization of host materials with a similar polarity to the emitter is found to be an effective strategy to improve device stability.

CN-Modified Imidazopyridine as a New Electron Accepting Unit of Thermally Activated Delayed Fluorescent Emitters

Two efficient thermally activated delayed fluorescent (TADF) emitters were developed by utilizing CN-modified imidazopyridine as an acceptor unit. The CN-modified imidazopyridine acceptor was combined with either an acridine donor or a phenoxazine donor through a phenyl linker to produce two TADF emitters, Ac-CNImPy and PXZ-CNImPy. The acridine-based Ac-CNImPy emitter exhibited sky-blue emission with a CIE coordinate of (0.18, 0.38), whereas the phenoxazine-donor-based PXZ-CNImPy showed greenish-yellow emission with a CIE coordinate of (0.32, 0.58). A high photoluminescence quantum yield of 80 % was observed for the PXZ-CNImPy emitter compared with 40 % for the Ac-CNImPy emitter. Organic light-emitting diodes based on the PXZ-CNImPy emitter demonstrated high external quantum efficiency of 17.0 %. Hence, the CN-modified imidazopyridine unit can be considered as a useful electron acceptor for the future design of highly efficient TADF emitters.

Spectrally resolved luminescence lifetime detection for measuring the energy splitting of the long-lived excited states

Molecular motion plays an important role in the reverse intersystem crossing of thermally activated delayed fluorescence (TADF) materials, since the conformation varies as the molecule vibrates, leading to potential changes in the energies of excited states. Although many theoretical simulations have researched the relationship between the excited states and the molecular conformations, there are still few experimental results showing the energy level difference between different long-lived excited states. Herein, a novel method for measuring spectrally resolved luminescence lifetimes is proposed to detect the energy splitting of the long-lived excited states of a classical TADF molecule, BTZ-DMAC. A set of the time-gated luminescence spectra with different delay times were captured by a spectrograph equipped on an auto-phase-locked system, and then used for lifetime analysis at each wavelength. Unlike traditional measurement techniques, the proposed novel method does not require ultrafast laser, high-speed detector and any phase matching circuitry, thus significantly reducing the cost. This method revealed a definite energy gap between the two excited states of BTZ-DMAC with different lifetimes, indicating different conformations caused by molecular vibration. This low-cost method could be also used to detect many other luminescence materials for investigating the detail mechanisms of multiple excited states.

The design, synthesis and performance of thermally activated delayed fluorescence macromolecules

The design, synthesis and performance of thermally activated delayed fluorescence macromolecules are summarized, and the typical solution-processed polymeric and dendritic emitters are also organized herein as a function of EL emission color.

Toward an understanding of electronic excitation energies beyond the molecular orbital picture

Can we gain an intuitive understanding of excitation energies beyond the molecular picture?

A donor design strategy for triazine-carbazole blue thermally activated delayed fluorescence materials

Enhancing the delayed emission proportion by incorporating bulky substituent at the 1-site of carbazole donors is proved to be effective and practical strategy to improve the EL performance of cyaphenine-carbazole type blue TADF emitters.

A single component self-assembled thermally activated delayed fluorescence nanoprobe

A novel versatile thermally activated delayed fluorescence (TADF) nanoprobe, AI-Cz-NP, was constructed by self-assembly of a single-component amphiphilic monomer for potential applications in confocal imaging and time-resolved fluorescence imaging.

Achieving Enhanced Thermally Activated Delayed Fluorescence Rates and Shortened Exciton Lifetimes by Constructing Intramolecular Hydrogen Bonding Channels

A fast radiative rate, highly suppressed nonradiation, and a short exciton lifetime are key elements for achieving efficient thermally activated delayed fluorescence (TADF) organic light-emitting diodes (OLEDs) with reduced efficiency roll-off at a high current density. Herein, four representative TADF emitters are designed and synthesized based on the combination of benzophenone (BP) or 3-benzoylpyridine (BPy3) acceptors, with dendritic 3,3″,6,6″-tetra-tert-butyl-9'H-9,3':6',9″-tercarbazole (CDTC) or 10H-spiro(acridine-9,9'-thioxanthene) (TXDMAc) donors, respectively. Density functional theory simulation and X-ray diffraction analysis validated the formation of CH···N intramolecular hydrogen bonds regarding the BPy3-CDTC and BPy3-TXDMAc compounds. Notably, the construction of intramolecular hydrogen bonding within TADF emitters significantly enhances the intramolecular charge transfer (ICT) strength while reducing the donor-acceptor (D-A) dihedral angle, resulting in accelerated radiative and suppressed nonradiative processes. With short TADF exciton lifetimes (τ_TADF) and high photoluminescence quantum yields (ϕ_PL), OLEDs employing BPy3-CDTC and BPy3-TXDMAc dopants realized maximum external quantum efficiencies (EQEs) up to 18.9 and 25.6%, respectively. Moreover, the nondoped device based on BPy3-TXDMAc exhibited a maximum EQE of 18.7%, accompanied by an extremely small efficiency loss of only 4.1% at the luminance of 1000 cd m^-2. In particular, the operational lifetime of the sky-blue BPy3-CDTC-based device was greatly extended by 10 times in contrast to the BP-CDTC-based counterpart, verifying the idea that the in-built intramolecular hydrogen bonding strategy was promising for the realization of efficient and stable TADF-OLEDs.

Use of Pyrimidine and Pyrazine Bridges as a Design Strategy To Improve the Performance of Thermally Activated Delayed Fluorescence Organic Light Emitting Diodes

We present a study of two isomeric thermally activated delayed fluorescence (TADF) emitters 9,9'-(sulfonylbis(pyrimidine-5,2-diyl))bis(3,6-di-tert-butyl-9H-carbazole) (pDTCz-DPmS) and 9,9'-(sulfonylbis(pyrazine-5,2-diyl))bis(3,6-di-tert-butyl-9H-carbazole) (pDTCz-DPzS). The use of pyrimidine and pyrazine as bridging units between the electron donor and acceptor moieties is found to be advantageous compared to the phenyl- (pDTCz-DPS) and pyridine-based analogues (pDTCz-3DPyS and pDTCz-2DPyS). Conformational modulation of the donor groups as a function of the bridge results in high photoluminescence quantum yields (Φ_PL > 68%) and small energy gaps between singlet and triplet excited states (ΔE_ST < 160 meV). OLEDs using pDTCz-DPmS and pDTCz-DPzS as emitters exhibit blue and green electroluminescence, respectively, with higher maximum external quantum efficiencies (EQE_max of 14% and 18%, respectively) and a reduced efficiency roll-off as compared to the reference devices using pDTCz-DPS, pDTCz-3DPyS, and pDTCz-2DPyS as the emitters. Our results provide a more complete understanding on the impact of the bridge structure in D-A-D TADF systems on the optoelectronic properties of the emitter and how the balance between color purity and EQE in the devices can be controlled, advancing the design strategies for TADF emitters.

Synthesis and optoelectronic properties of benzoquinone-based donor-acceptor compounds

Herein, we report a mild and efficient palladium-catalyzed C–H functionalization method to synthesize a series of benzoquinone (BQ)-based charge-transfer (CT) derivatives in good yields. The optoelectronic properties of these compounds were explored both theoretically and experimentally and correlations to their structures were identified as a function of the nature and position of the donor group (meta and para) attached to the benzoquinone acceptor. Compound 3, where benzoquinone is para-conjugated to the diphenylamine donor group, exhibited thermally activated delayed fluorescence (TADF) with a biexponential lifetime characterized by a prompt ns component and a delayed component of 353 μs.

Thioarylmaleimides: accessible, tunable, and strongly emissive building blocks

A series of thioarylmaleimides was synthesized to investigate how variation of the thioaryl group can be used to control absorption and emission properties in solution and in the solid-state. Fine-tuning of the photochemical properties was found to be possible using this strategy, and a rainbow of colours and emission wavelengths are accessible in a single step from commercially available compounds.

Triplet-triplet upconversion enhanced by spin-orbit coupling in organic light-emitting diodes

Triplet–triplet upconversion, in which two triplet excitons are converted to one singlet exciton, is a well-known approach to exceed the limit of electroluminescence quantum efficiency in conventional fluorescence-based organic light-emitting diodes. Considering the spin multiplicity of triplet pairs, upconversion efficiency is usually limited to 20%. Although this limit can be exceeded when the energy of a triplet pair is lower than that of a second triplet excited state, such as for rubrene, it is generally difficult to engineer the energy levels of higher triplet excited states. Here, we investigate the upconversion efficiency of a series of new anthracene derivatives with different substituents. Some of these derivatives show upconversion efficiencies close to 50% even though the calculated energy levels of the second triplet excited states are lower than twice the lowest triplet energy. A possible upconversion mechanism is proposed based on the molecular structures and quantum chemical calculations.

Though triplet-triplet upconversion is a promising strategy for designing new deep blue-emitting organic materials, maximizing the efficiency of this process remains difficult. Here, the authors report the upconversion efficiency in anthracene derivatives based on a spin-orbit coupling mechanism.

A Simple Molecular Design Strategy for Delayed Fluorescence toward 1000 nm

Harnessing the near-infrared (NIR) region of the electromagnetic spectrum is exceedingly important for photovoltaics, telecommunications, and the biomedical sciences. While thermally activated delayed fluorescent (TADF) materials have attracted much interest due to their intense luminescence and narrow exchange energies (ΔE_ST), they are still greatly inferior to conventional fluorescent dyes in the NIR, which precludes their application. This is because securing a sufficiently strong donor–acceptor (D–A) interaction for NIR emission alongside the narrow ΔE_ST required for TADF is highly challenging. Here, we demonstrate that by abandoning the common polydonor model in favor of a D–A dyad structure, a sufficiently strong D–A interaction can be obtained to realize a TADF emitter capable of photoluminescence (PL) close to 1000 nm. Electroluminescence (EL) at a peak wavelength of 904 nm is also reported. This strategy is both conceptually and synthetically simple and offers a new approach to the development of future NIR TADF materials.

Oxidation State-Dependent Electronic Properties of Sulfur-Containing Thermally Activated Delayed Fluorescence Molecules

Comparative studies of a series of sulfur-containing thermally activated delayed fluorescence (TADF) molecules and their oxidized compounds are carried out by means of electronic structure calculations. Aiming at investigating the effects of oxidation of bridged sulfur on the modulation of electronic structures of sulfur-containing TADF molecules, their geometrical structures, singlet (S₁) and triple (T₁) energies and their gap (ΔE_ST), the transition dipole moment, the spin-orbit coupling (SOC) between S₁ and T₁ states, the ionization potentials, and electron affinities are analyzed in detail to determine the structure-property relationships in these investigated TADF molecules and their corresponding oxidized counterparts. The electronic structure calculations show that the oxidation of bridged sulfur into the corresponding sulfoxide and sulfone significantly changes the electronic properties of TADF molecules. Interestingly, a substantial reduction in the singlet-triplet energy difference is possible with an increase in the oxidation state of the sulfur atom in the core. Moreover, the sulfone-containing molecules exhibit both S₁ and T₁ states having a large charge transfer (CT) excitation characteristic, which helps reduce the singlet-triplet energy gap and facilitates the reverse intersystem crossing (RISC) from the triplet state to the singlet state. SOC values increase with an increase in the oxidation state of the sulfur atom. Particularly, a sulfoxide-containing core moiety exhibits higher SOC values when compared with the sulfone-containing acceptor core.

High-Efficiency Red Organic Light-Emitting Diodes with External Quantum Efficiency Close to 30% Based on a Novel Thermally Activated Delayed Fluorescence Emitter

Researchers have spared no effort to design new thermally activated delayed fluorescence (TADF) emitters for high-efficiency organic light-emitting diodes (OLEDs). However, efficient long-wavelength TADF emitters are rarely reported. Herein, a red TADF emitter, TPA-PZCN, is reported, which possesses a high photoluminescence quantum yield (Φ_PL ) of 97% and a small singlet-triplet splitting (ΔE_ST ) of 0.13 eV. Based on the superior properties of TPA-PZCN, red, deep-red, and near-infrared (NIR) OLEDs are fabricated by utilizing different device structure strategies. The red devices obtain a remarkable maximum external quantum efficiency (EQE) of 27.4% and an electroluminescence (EL) peak at 628 nm with Commission Internationale de L'Eclairage (CIE) coordinates of (0.65, 0.35), which represents the best result with a peak wavelength longer than 600 nm among those of the reported red TADF devices. Furthermore, an exciplex-forming cohost strategy is adopted. The devices achieve a record EQE of 28.1% and a deep-red EL peak at 648 nm with the CIE coordinates of (0.66, 0.34). Last, nondoped devices exhibit 5.3% EQE and an NIR EL peak at 680 nm with the CIE coordinates of (0.69, 0.30).

Feasible Modification of PEDOT:PSS by Poly(4-styrenesulfonic acid): A Universal Method to Double the Efficiencies for Solution-Processed Organic Light-Emitting Devices

A feasible, universal, and low-cost strategy for solution-processed organic light-emitting diodes (OLEDs) was provided to significantly enhance the electroluminescent performances. The commercially available poly(4-styrenesulfonic acid) (PSSA) aqueous solution was mixed into poly(styrene sulfonic acid)-doped poly(3,4-ethylenedioxythiphene) (PEDOT:PSS) to modify its chemical and physical properties. The corresponding work function can be easily elevated from 5.04 to 5.63 eV. The modification of PEDOT:PSS by PSSA is found to be a universal method to demonstrate highly efficient OLEDs with different solution-processed host/emitter combinations, covering phosphorescent and thermally activated delayed fluorescence devices. The benchmarking solution-processed OLEDs based on 2,4,5,6-tetrakis(carbazol-9-yl)-1,3-dicyanobenzene and bis[2-(4,6-difluorophenyl)pyridinato-C²,N](picolinato)iridium(III) achieved the maximum external quantum efficiencies of 26.6 and 22.4%, respectively, simply by modifying PEDOT:PSS with PSSA, corresponding to the improvement factors of 2.7 and 2.2. It is confirmed that such performances originate simultaneously from reduced interfacial fluorescence quenching, elevated work function, and reduced lateral conduction of the commonly used PEDOT:PSS (Clevios P VP Al 4083).

Red/Near-Infrared Thermally Activated Delayed Fluorescence OLEDs with Near 100 % Internal Quantum Efficiency

Developing red thermally activated delayed fluorescence (TADF) emitters, attainable for both high-efficient red organic light-emitting diodes (OLEDs) and non-doped deep red/near-infrared (NIR) OLEDs, is challenging. Now, two red emitters, BPPZ-PXZ and mDPBPZ-PXZ, with twisted donor-acceptor structures were designed and synthesized to study molecular design strategies of high-efficiency red TADF emitters. BPPZ-PXZ employs the strictest molecular restrictions to suppress energy loss and realizes red emission with a photoluminescence quantum yield (Φ_PL ) of 100±0.8 % and external quantum efficiency (EQE) of 25.2 % in a doped OLED. Its non-doped OLED has an EQE of 2.5 % owing to unavoidable intermolecular π-π interactions. mDPBPZ-PXZ releases two pyridine substituents from its fused acceptor moiety. Although mDPBPZ-PXZ realizes a lower EQE of 21.7 % in the doped OLED, its non-doped device shows a superior EQE of 5.2 % with a deep red/NIR emission at peak of 680 nm.

Realizing 22.5% External Quantum Efficiency for Solution-Processed Thermally Activated Delayed-Fluorescence OLEDs with Red Emission at 622 nm via a Synergistic Strategy of Molecular Engineering and Host Selection

Developing high-efficiency solution-processable thermally activated delayed-fluorescence (TADF) emitters, especially in longer wavelength regions, is a formidable challenge. Three red TADF emitters, namely NAI_R1, NAI_R2, and NAI_R3, are developed by phenyl encapsulation and tert-butyl substitution on a prototypical 1,8-naphthalimide-acridine hybrid. This design strategy not only grants these molecules high solubility, excellent thermal stability, and good film-forming ability, but also pulls down their charge-transfer (CT) energy levels excited states. Furthermore, dispersing these emitters into two different host materials of mCP and mCPCN finely tailors their CT-state energy levels. More importantly, a synergistic combination of molecular engineering and host selection can effectively manipulate the competition between the radiative and nonradiative decay rates of the CT singlet states of these emitters and the reverse intersystem crossing from their triplet to singlet states. Consequently, the optimal combination of NAI_R3 emitter and mCP host successfully results in a state-of-the-art external quantum efficiency (EQE) of 22.5% for solution-processed red TADF organic light-emitting diodes (OLEDs) with an emission peak above 620 nm. This finding demonstrates that a synergistic strategy of molecular engineering and host selection with TADF emitters could provide a new pathway for developing efficient solution-processable TADF systems.

Circularly Polarized Electroluminescence of Thermally Activated Delayed Fluorescence-Active Chiral Binaphthyl-Based Luminogens

Two pairs of thermally activated delayed fluorescence (TADF)-active chiral luminogens (R/S-1 and R/S-2) can be achieved by introducing D-A-type groups to chiral BINOL skeletons. The resulting chiral luminogens can exhibit aggregation-induced emission properties in THF-water mixtures and TADF emission in a doped-film state. The absolute photoluminescence quantum yield (Φ_PL) and delayed fluorescence lifetimes (τ_delayed) were measured to be 18.5% and 1.03 μs for R-1 and 15.7% and 0.97 μs for R-2. However, only R/S-1 with the fixed conjugation structure can emit circularly polarized luminescence signals, and g_lum can reach 1.6 × 10^-3 in toluene solution and 9.2 × 10^-4 in the neat film. Most importantly, R/S-1 was chosen as the emitting layers for orange-red circularly polarized organic light-emitting diodes, which can display low turn-on voltage (V_on) of 3.4 V, high maximum brightness (L_max) up to 40 470 cd m^-2, moderate external quantum efficiency of 4.1%, as well as circularly polarized electroluminescence signal with g_EL = -0.9 × 10^-3/+1.0 × 10^-3.

Rational Molecular Design of Dibenzo[a,c]phenazine-Based Thermally Activated Delayed Fluorescence Emitters for Orange-Red OLEDs with EQE up to 22.0

The design and synthesis of highly efficient thermally activated delayed fluorescence (TADF) emitters with an electroluminescence wavelength beyond 600 nm remains a great challenge for organic light-emitting diodes (OLEDs). To solve this issue, three TADF molecules, xDMAC-BP (x = 1, 2, 3), are developed in combination with the rigid planar dibenzo[a,c]phenazine (BP) acceptor core and different numbers of 9,9-dimethylacridan (DMAC) donors. All these emitters possess stable internal charge transfer and a large dihedral angle between the donors and planar BP core. The emission wavelength can be regulated from 541 to 605 nm by increasing the number of the donor DMAC units because of the controllable tuning of the intramolecular charge transfer effect and the molecular geometrical structure. The photoluminescence quantum yields of these emitters are improved from 42 to 89% with the increase in the number of DMAC units. The orange-red OLEDs employing the xDMAC-BP emitters exhibit maximum external quantum efficiency (EQE) of 22.0% at 606 nm, which is the highest EQE of the previously reported TADF OLEDs exceeding 600 nm.

Tricomponent Exciplex Emitter Realizing over 20% External Quantum Efficiency in Organic Light-Emitting Diode with Multiple Reverse Intersystem Crossing Channels

With the naturally separated frontier molecular orbitals, exciplexes are capable of thermally activated delayed fluorescence emitters for organic light-emitting diodes (OLEDs). And, the current key issue for exciplex emitters is improving their exciton utilization. In this work, a strategy of building exciplex emitters with three components is proposed to realize multiple reverse intersystem crossing (RISC) channels, improving their exciton utilization by enhancing upconversion of nonradiative triplet excitons. Accordingly, a tricomponent exciplex DBT-SADF:PO-T2T:CDBP is constructed with three RISC channels respectively on DBT-SADF, DBT-SADF:PO-T2T, and CDBP:PO-T2T. Furthermore, its photoluminescence quantum yield and rate constant of the RISC process are successfully improved. In the OLED, DBT-SADF:PO-T2T:CDBP exhibits a remarkably high maximum external quantum efficiency (EQE) of 20.5%, which is the first report with an EQE over 20% for the OLEDs based on exciplex emitters to the best of our knowledge. This work not only demonstrates that introducing multiple RISC channels can effectively improve the exciton utilization of exciplex emitters, but also proves the superiority of the tricomponent exciplex strategy for further development of exciplex emitters.

Highly Efficient Thermally Activated Delayed Fluorescence via J-Aggregates with Strong Intermolecular Charge Transfer

The development of high-efficiency and low-cost organic emissive materials and devices is intrinsically limited by the energy-gap law and spin statistics, especially in the near-infrared (NIR) region. A novel design strategy is reported for realizing highly efficient thermally activated delayed fluorescence (TADF) materials via J-aggregates with strong intermolecular charge transfer (CT). Two organic donor-acceptor molecules with strong and planar acceptor are designed and synthesized, which can readily form J-aggregates with strong intermolecular CT in solid states and exhibit wide-tuning emissions from yellow to NIR. Experimental and theoretical investigations expose that the formation of such J-aggregates mixes Frenkel excitons and CT excitons, which not only contributes to a fast radiative decay rate and a slow nonradiative decay rate for achieving nearly unity photoluminescence efficiency in solid films, but significantly decreases the energy gap between the lowest singlet and triplet excited states (≈0.3 eV) to induce high-efficiency TADF even in the NIR region. These organic light-emitting diodes exhibit external quantum efficiencies of 15.8% for red emission and 14.1% for NIR emission, which represent the best result for NIR organic light-emitting diodes (OLEDs) based on TADF materials. These findings open a new avenue for the development of high-efficiency organic emissive materials and devices based on molecular aggregates.