Polymer Dots with Delayed Fluorescence and Tunable Cellular Uptake for Photodynamic Therapy and Time-Gated Imaging

By combining bioimaging and photodynamic therapy (PDT), it is possible to treat cancer through a theranostic approach with targeted action for minimum invasiveness and side effects. Thermally activated delayed fluorescence (TADF) probes have gained recent interest in theranostics due to their ability to generate singlet oxygen (1O2) while providing delayed emission that can be used in time-gated imaging. However, it is still challenging to design systems that simultaneously show (1) high contrast for imaging, (2) low dark toxicity but high phototoxicity and (3) tunable biological uptake. Here, we circumvent shortcomings of TADF systems by designing block copolymers and their corresponding semiconducting polymer dots (Pdots) that encapsulate a TADF dye in the core and expose an additional boron-dipyrromethene (BODIPY) oxygen sensitizer in the corona. This architecture provides orange-red luminescent particles (ΦPL up to 18 %) that can efficiently promote PDT (1O2 QY=42 %) of HeLa cells with very low photosensitizer loading (IC50 ~0.05-0.13 μg/mL after 30 min). Additionally, we design Pdots with tunable cellular uptake but similar PDT efficiencies using either polyethylene glycol or guanidinium-based coronas. Finally, we demonstrate that these Pdots can be used for time-gated imaging to effectively filter out background fluorescence from biological samples and improve image contrast.

Dopants Induce Persistent Room Temperature Phosphorescence in Triarylamine Boronate Esters

Purely organic materials exhibiting room temperature phosphorescence (RTP) are promising candidates for oxygen sensors and information encryption owing to their cost-effective and environmentally friendly nature. Herein, we report a bimolecular RTP system where DTBU acts as the guest and TBBU serves as the host. In contrast to previously reported results, we find that both pure DTBU and TBBU do not exhibit RTP in the solid state even under N2 atmosphere. A DTBU/TBBU system with a low doping ratio (0.1 mol %) exhibits persistent yellowish-green afterglow with a lifetime of 340 ms and is highly sensitive to oxygen. A DTBU/TBBU system with a higher doping ratio (10 mol %) maintains a phosphorescence lifetime of 179 ms under air. Applications of DTBU/TBBU at varied doping ratios in both oxygen sensing and information encryption are demonstrated. We propose that the T1 state of TBBU acts as an energy transfer intermediate between Tn and T1 of DTBU, ultimately leading to the generation of persistent RTP. Overall, this work demonstrates the critical importance of material purity in the design of RTP systems, and how an understanding of host-guest doping enables their photophysical properties to be precisely tuned.

Excited-state dynamics of C3-symmetric heptazine-based thermally activated delayed-fluorescence emitters

Heptazine-based materials have recently emerged as a promising motif for thermally activated delayed fluorescence, as their near-zero or negative singlet-triplet energy gaps enable extremely fast reverse intersystem crossing (rISC) rates. Another method for achieving a high rate of rISC is through the use of highly symmetric emitters, which benefit from energy-level degeneracies and a high density of states. Here, we investigate the effect of combining these two design strategies on the excited-state dynamics of C3-symmetric emitters containing heptazine cores. We find that in two of the four emitters studied, the S1 state has a high degree of locally excited (LE) character with density on the heptazine moiety, preventing excited-state localization and a loss of symmetry in the energy-minimized S1 geometry. Surprisingly, these symmetric molecules still suffer from a loss of density of triplet states below the S1 state. Overall, we find that maintaining C3 symmetry will not necessarily maintain density of states, but that heptazine-based materials with LE S1 states still benefit from maximized rISC rates via increased spin-orbit coupling with low-lying charge-transfer triplet states and exhibit advantageous photophysical properties, such as near-unity photoluminescence quantum yields and high colour purity.

Organic Photothermal Materials Obtained Using Thermally Activated Delayed Fluorescence Design Principles

Organic small molecules with high photothermal conversion efficiencies that absorb near-infrared light are desirable for photothermal therapy due to their improved biocompatibility compared to inorganic materials and their ability to absorb light in the biological transparency window (650-1350 nm). Here we report three donor-acceptor organic materials DM-ANDI, O-ANDI, and S-ANDI that show high photothermal conversion efficiencies of 46-68 % with near-infrared absorption. The design of these molecules is based on the rational modification of a thermally activated delayed fluorescence material to favour a low photoluminescence quantum yield by reducing HOMO-LUMO overlap. Encapsulating these materials into either neat nanoparticles or aggregated organic dots modulates their photothermal conversion efficiencies, and also facilitates dispersion in water.

Semiconducting Polymer Dots Directly Stabilized with Serum Albumin: Preparation, Characterization, and Cellular Immunolabeling

Semiconducting polymer dots (Pdots) are brightly fluorescent nanoparticles of growing interest for bioanalysis and imaging. A recurring challenge with these materials is obtaining robust physical and colloidal stability and low nonspecific binding. Here, we prepared and characterized Pdots with bovine serum albumin (BSA) as the stabilizing agent (BSA-Pdots) instead of a more conventionally used amphiphilic polymer, both without and with cross-linking of the protein using glutaraldehyde (BSA(GA)-Pdots) or disuccinimidyl glutarate. Characterization included fluorescence properties; colloidal stability as a function of pH, ionic strength, and solvent perturbation; shape retention and hardness; and nonspecific binding with common assay substrates, fixed cells, and live cells. These properties were contrasted with the same properties for amphiphilic polymer-stabilized Pdots and silica-coated Pdots. On balance, the BSA-stabilized Pdots were similar or more favorable in their properties, with BSA(GA)-Pdots being especially advantageous. Bioconjugation of the BSA-stabilized Pdots was possible using amine-reactive active-ester chemistry, including biotinylation and bioorthogonal functionalization for immunoconjugation via tetrazine-strained-alkene click chemistry. These approaches were used for selective fluorescent labeling of cells based on ligand-receptor and antibody-antigen binding, respectively. Overall, direct BSA stabilization is a very promising strategy for preparing Pdots with improved physical and colloidal stability, reduced nonspecific interactions, and utility for in vitro diagnostics and other bioanalyses and imaging.

Red-Shifted Emission in Multiple Resonance Thermally Activated Delayed Fluorescent Materials through Malononitrile Incorporation

Multiple resonance thermally activated delayed fluorescent (MR-TADF) materials offer higher color purity than conventional TADF materials but suffer from aggregation-caused quenching (ACQ) and rarely exhibit red emission. Herein, two malononitrile-substituted emitters are synthesized from a quinolino[3,2,1-de]acridine-5,9-dione (QAO) MR-TADF precursor. Both materials maintain MR-TADF, while they display red-shifted fluorescence. They also overcome ACQ, displaying enhanced emission upon aggregation in solution and forming red-emissive J-aggregates in the solid state with photoluminescent quantum yields of 9 and 11%.

Achieving White-Light Emission Using Organic Persistent Room Temperature Phosphorescence

Artificial lighting currently consumes approximately one-fifth of global electricity production. Organic emitters with white persistent RTP have potential for applications in energy-efficient lighting technologies, due to their ability to harvest both singlet and triplet excitons. Compared to heavy metal phosphorescent materials, they have significant advantages in cost, processability, and reduced toxicity. Phosphorescence efficiency can be improved by introducing heteroatoms, heavy atoms, or by incorporating luminophores within a rigid matrix. White-light emission can be achieved by tuning the ratio of fluorescence to phosphorescence intensity or by pure phosphorescence with a broad emission spectrum. This review summarizes recent advances in the design of purely organic RTP materials with white-light emission, describing single-component and host-guest systems. White phosphorescent carbon dots and representative applications of white-light RTP materials are also introduced.

Dibenzodipyridophenazines with Dendritic Electron Donors Exhibiting Deep-Red Emission and Thermally Activated Delayed Fluorescence

The development of deep-red thermally activated delayed fluorescence (TADF) emitters is important for applications such as organic light-emitting diodes (OLEDs) and biological imaging. Design strategies for red-shifting emission include synthesizing rigid acceptor cores to limit nonradiative decay and employing strong electron-donating groups. In this work, three novel luminescent donor-acceptor compounds based on the dibenzo[a,c]dipyrido[3,2-h:20-30-j]-phenazine-12-yl (BPPZ) acceptor were prepared using dendritic carbazole-based donors 3,3″,6,6″-tetramethoxy-9'H-9,3':6',9″-tercarbazole (TMTC), N³,N³,N⁶,N⁶-tetra-p-tolyl-9H-carbazole-3,6-diamine (TTAC), and N³,N³,N⁶,N⁶-tetrakis(4-methoxyphenyl)-9H-carbazole-3,6-diamine (TMAC). Here, dimethoxycarbazole, ditolylamine, and bis(4-methoxyphenyl)amine were introduced at the 3,6-positions of carbazole to increase the strength of these donors and induce long-wavelength emission. Substituent effects were investigated with experiments and theoretical calculations. The emission maxima of these materials in toluene were found to be 562, 658, and 680 nm for BPPZ-2TMTC, BPPZ-2TTAC, and BPPZ-2TMAC, respectively, highlighting the exceptional strength of the TMAC donor, which pushes the emission into the deep-red region of the visible spectrum as well as into the biological transparency window (650-1350 nm). Long-lived emission lifetimes were observed in each emitter due to TADF in BPPZ-2TMC and BPPZ-2TTAC, as well as room-temperature phosphorescence in BPPZ-2TMAC. Overall, this work showcases deep-red emissive dendritic donor-acceptor materials which have potential as bioimaging agents with emission in the biological transparency window.

Thermally Activated Delayed Fluorescence and Room-Temperature Phosphorescence in Materials with Imidazo-pyrazine-5,6-dicarbonitrile Acceptors

Three donor-acceptor compounds based on the imidazo-pyrazine-5,6-dicarbonitrile (IPDC) acceptor were synthesized. The IPDC emitters exhibit blue to near-infrared (NIR) emission with up to 54 % photoluminescent quantum yield. 9,9-Dimethyl-9,10-dihydroacridine (ACR), phenoxazine (POX), and phenothiazine (PTZ) served as electron donors. IPDC-POX displayed NIR emission in toluene solution, while showing room-temperature phosphorescence in the solid state. IPDC-ACR exhibited yellow thermally activated delayed fluorescence. Interestingly, dual-emissive behavior as well as excitation-dependent thermally activated delayed fluorescence (TADF) was found for IPDC-PTZ, arising from the two conformers of phenothiazine derivatives. Overall, this work describes a novel strong electron acceptor from the fusion of imidazole, pyrazine, and nitrile functional groups into one conjugated heterocycle for materials exhibiting NIR emission, TADF, and/or room-temperature phosphorescence (RTP).

Uncovering the Mechanism of Thermally Activated Delayed Fluorescence in Coplanar Emitters Using Potential Energy Surface Analysis

Planarized emitters exhibiting thermally activated delayed fluorescence (TADF) have attracted attention due to their narrow emission spectra, improved photostability, and high quantum yields, but with large singlet-triplet energy gaps (ΔE_ST) and no heavy atoms, the origin of their TADF remains a subject of debate. Here we prepare two isomeric, coplanar donor-acceptor compounds, with HMAT-2PYM performing dual TADF and room-temperature phosphorescence but with HMAT-4PYM exhibiting only prompt fluorescence. Although conventional TADF design principles suggest that neither isomer should exhibit TADF, we reveal differences in the excited state potential energy surfaces that enable spin-flip processes in only one isomer. We also find that hydrogen bonding is absent between the planar units of these emitters, despite earlier claims of intramolecular hydrogen bonding in similar compounds. Overall, this work demonstrates that potential energy surface analysis is a practical strategy for designing coplanar TADF materials that might otherwise be overlooked by conventional TADF design metrics.

A grafting-from strategy for the synthesis of bottlebrush nanofibers from organic semiconductors

Bottlebrush polymers with optoelectronic function show promise for applications in photonic crystals, nanomedicine, and encoding of information. In particular, bottlebrush polymers formed from organic semiconductors give wire-like nanoparticles where band gaps, fluorescence, and energy transfer can be tuned. To date, such bottlebrush polymers have largely been prepared by grafting-through polymerization of organic semiconductor macromonomers, where pre-synthesized side chains are polymerized along a bottlebrush backbone. While this approach provides high side-chain grafting densities, the length of bottlebrush polymers that is possible to obtain is limited by steric crowding at the propagating chain end. Here, we describe methods for preparing ultralong bottlebrush nanofibers from organic semiconductors, with backbone lengths approaching 800 repeating units and molecular weights in excess of 4 MDa. By combining reversible addition fragmentation chain transfer and Cu(0) reversible deactivation radical polymerization, a “grafting-from” protocol is described where monomers can be grown from a pre-synthesized backbone. Bottlebrush polymers were prepared from organic semiconductors used as n-type, p-type, and host materials in multilayer organic devices. Finally, a two-component bottlebrush polymer exhibiting deep blue emission, two-photon fluorescence, and a quantum yield of unity is also prepared by this method.

Mechanistic Principles for Engineering Hierarchical Porous Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have generated tremendous research interest in the past two decades, due to their high surface areas, tailorable active sites, and tunable structures. Hierarchical porous MOFs (HP-MOFs) with two or more pore systems are particularly attractive, benefiting from improved active site accessibility and enhanced mass diffusivity in applications involving bulk molecules. This review outlines the mechanistic principles used for the rational design of HP-MOFs, current techniques used to measure their hierarchical porosities, as well as their emerging applications. We then critically summarize the current challenges in this field and provide a contemporary perspective on the technological innovations that would address current synthetic challenges in the field of HP-MOFs. The aim of this review is to provide an in-depth understanding of the formation mechanisms, materials chemistry, and structural and chemical properties of HP-MOFs while exploring ways to enhance the performance of current MOF materials in a range of fields.

Polymer dots and glassy organic dots using dibenzodipyridophenazine dyes as water-dispersible TADF probes for cellular imaging

Fluorescence imaging of living cells is key to better understanding cellular morphology and biological processes. Water-dispersible nanoparticles exhibiting thermally activated delayed fluorescence (TADF) have recently emerged as useful probes for time-resolved fluorescence imaging (TRFI), circumventing interference from biological autofluorescence. Many existing approaches, however, require TADF dyes with specific structural features, precluding many high-performance TADF materials from being used in this application. Here, we describe the synthesis of two TADF emitters based on the rigid and strongly electron-withdrawing dibenzo[a,c]dipyrido[3,2-h:2'-3'-j]phenazine-12-yl (BPPZ) motif, and demonstrate two parallel approaches for the encapsulation of these fluorophores to yield water-dispersible nanoparticles suitable for TRFI. First, fluorescent polymer dots (Pdots) were formed by dye encapsulation within cell-penetrating amphiphilic copolymers. Glassy organic nanoparticles (g-Odots) were also prepared, giving nanoparticles with higher photoluminescence quantum yields and improved colour purity. Both approaches yielded nanoparticles suitable for imaging, with reasonable uptake and cytotoxicity on the timescale of standard imaging experiments using human cervical (HeLa) and liver (HepG2) cancer cell lines. This work demonstrates two flexible strategies for preparing water-dispersible TADF nanoparticles for TRFI, both of which should be readily adaptable to nearly any existing hydrophobic TADF dye.

Donor modification of thermally activated delayed fluorescence photosensitizers for organocatalyzed atom transfer radical polymerization

TADF donor-acceptor conjugates were applied as photosensitizers for organocatalyzed organic atom transfer radical polymerization. A donor-modification strategy was found to dramatically improve the control over the polymerization.

An Imidazoacridine-Based TADF Material as Effective Organic Photosensitizer for Visible-Light-Promoted [2+2] Cycloaddition

Energy transfer (EnT) is a fundamental activation process in visible-light-promoted photocycloaddition reactions. This work describes the performance of imidazoacridine-based TADF materials for visible-light mediated triplet–triplet EnT photocatalysis. The TADF material ACR-IMAC has been discovered as an inexpensive, high-performance organic alternative to the commonly used metal-based photosensitizers for visible-light EnT photocatalysis. The efficiency of ACR-IMAC as a photosensitizer is comparable with Ir-based photosensitizers in both intra- and intermolecular [2 + 2] cycloadditions. ACR-IMAC mediated both dearomative and non-dearomative [2 + 2] cycloadditions in good yields, with high regio- and diastereocontrol. Cyclobutane-containing bi- tri- and tetracylic scaffolds were successfully prepared, with broad tolerance toward functional groups relevant to drug discovery campaigns. Fluorescence quenching experiments, time-correlated single-photon counting, and transient absorption spectroscopy were also conducted to provide insight into the reaction and evidence for an EnT mechanism.

This work describes the performance of imidazoacridine-based TADF materials for visible-light mediated triplet–triplet EnT photocatalysis.

Polymer Dots with Enhanced Photostability, Quantum Yield, and Two-Photon Cross-Section using Structurally Constrained Deep-Blue Fluorophores

Semiconducting polymer dots (Pdots) have emerged as versatile probes for bioanalysis and imaging at the single-particle level. Despite their utility in multiplexed analysis, deep blue Pdots remain rare due to their need for high-energy excitation and sensitivity to photobleaching. Here, we describe the design of deep blue fluorophores using structural constraints to improve resistance to photobleaching, two-photon absorption cross sections, and fluorescence quantum yields using the hexamethylazatriangulene motif. Scanning tunneling microscopy was used to characterize the electronic structure of these chromophores on the atomic scale as well as their intrinsic stability. The most promising fluorophore was functionalized with a polymerizable acrylate handle and used to give deep-blue fluorescent acrylic polymers with M_n > 18 kDa and Đ < 1.2. Nanoprecipitation with amphiphilic polystyrene-graft-(carboxylate-terminated poly(ethylene glycol)) gave water-soluble Pdots with blue fluorescence, quantum yields of 0.81, and molar absorption coefficients of (4 ± 2) × 10⁸ M^-1 cm^-1. This high brightness facilitated single-particle visualization with dramatically improved signal-to-noise ratio and photobleaching resistance versus an unencapsulated dye. The Pdots were then conjugated with antibodies for immunolabeling of SK-BR3 human breast cancer cells, which were imaged using deep blue fluorescence in both one- and two-photon excitation modes.

Thermally activated delayed fluorescence materials as organic photosensitizers

Photosensitizer molecules play a crucial role in materials and life sciences. Efforts to improve their performance and reduce the associated costs are therefore vital for advancing environmentally friendly light-driven technologies. In this Feature Article, we describe the use of photosensitizers that make use of thermally activated delayed fluorescence (TADF), their benefits compared to conventional fluorescent and phosphorescent sensitizers, and the efforts of our group and others to develop emitters with application-tailored properties. The key feature is the diversity of accessible excited state pathways, which may be tuned by molecular and supramolecular approaches to suit a particular problem. This unique property has allowed TADF emitters to become competitive for applications including TADF-sensitized fluorescence in light emitting diodes and chemical sensing, organic long persistent luminescence, photodynamic therapy, and non-coherent photon upconversion.

Red-Emissive Cell-Penetrating Polymer Dots Exhibiting Thermally Activated Delayed Fluorescence for Cellular Imaging

Fluorescence imaging in living cells is key to understanding many biological processes, yet autofluorescence from the sample can lower sensitivity and hinder high-resolution imaging. Time-gated measurements using phosphorescent metal complexes can improve imaging, at the cost of potential toxicity from the use of heavy metals. Here, we describe orange/red-emitting polymer dots (Pdots) exhibiting thermally activated delayed fluorescence (TADF) for time-gated imaging. Inspired by the cell invasion mechanism of the HIV TAT protein, the Pdots were formed from block copolymers composed of a hydrophilic guanidine-rich block as a cell-penetrating peptide mimic, and a rigid organic semiconductor block to provide efficient delayed fluorescence. These all-organic polymer nanoparticles were shown to efficiently enter HeLa, CHO, and HepG2 cells within 30 min, with cell viabilities remaining high for Pdot concentrations up to 25 mg mL^-1. Pdot quantum yields were as high as 0.17 in aerated water, with the Pdot structure effectively shielding the TADF emitters from quenching by oxygen. Colocalization experiments revealed that the Pdots primarily accumulate outside of lysosomes, minimizing lysosomal degradation. When used for fixed cellular imaging, Pdot-incubated cells showed high signal-to-background ratios compared to control samples with no Pdot exposure. Using time-resolved spectroscopy, the delayed emission of the TADF materials was effectively separated from that of both a biological serum and a secondary fluorescent dye.

Preparation of Patterned and Multilayer Thin Films for Organic Electronics via Oxygen-Tolerant SI-PET-RAFT

An oxygen-tolerant approach is described for preparing surface-tethered polymer films of organic semiconductors directly from electrode substrates using polymer brush photolithography. A photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) approach was used to prepare multiblock polymer architectures with the structures of multi-layer organic light-emitting diodes (OLEDs), including electron-transport, emissive, and hole-transport layers. The preparation of thermally activated delayed fluorescence (TADF) and thermally assisted fluorescence (TAF) trilayer OLED architectures are described. By using direct photomasking as well as a digital micromirror device, we also show that the surface-initiated (SI)-PET-RAFT approach allows for enhanced control over layer thickness, and spatial resolution in polymer brush patterning at low cost.

Near-Infrared-Emitting Boron-Difluoride-Curcuminoid-Based Polymers Exhibiting Thermally Activated Delayed Fluorescence as Biological Imaging Probes

Near-infrared-emitting polymers were prepared using four boron-difluoride-curcuminoid-based monomers using ring-opening metathesis polymerization (ROMP). Well-defined polymers with molecular weights of ≈20 kDa and dispersities <1.07 were produced and exhibited near-infrared (NIR) emission in solution and in the solid state with photoluminescence quantum yields (Φ_PL ) as high as 0.72 and 0.18, respectively. Time-resolved emission spectroscopy revealed thermally activated delayed fluorescence (TADF) in polymers containing highly planar dopants, whereas room-temperature phosphorescence dominated with twisted species. Density functional theory demonstrated that rotation about the donor-acceptor linker can give rise to TADF, even where none would be expected based on calculations using ground-state geometries. Incorporation of TADF-active materials into water-soluble polymer dots (Pdots) gave NIR-emissive nanoparticles, and conjugation of these Pdots with antibodies enabled immunofluorescent labeling of SK-BR3 human breast-cancer cells.

Toward Biodegradable Electronics: Ionic Diodes Based on a Cellulose Nanocrystal-Agarose Hydrogel

Bioderived cellulose nanocrystals (CNCs) are used to create light, flexible, biocompatible, and biodegradable electronic devices. Herein, surface modification of cellulose nanocrystals was employed to fabricate cationic and anionic CNCs. Subsequently, we demonstrated rectification behavior from a fixed junction between two agarose hydrogels doped with cationic and anionic cellulose nanocrystals. The current rectification ratio reaches 70 reproducibly, which is significantly higher than that for analogous diodes generated with microfibrillated cellulose (∼15) and the first polyelectrolyte gel diode (∼40). The current-voltage characteristics of the CNC-hydrogel diode are influenced by concentration, gel thickness, scanning frequency, and applied voltage. The high surface area of CNC resulted in high charge density after surface modification, which in turn resulted in good rectification behavior from only small amounts of dopant material.

Thermally Activated Delayed Fluorescence in 1,3,4-Oxadiazoles with π-Extended Donors

Here, we describe the synthesis of five 1,3,4-oxadiazole-based donor-acceptor materials, using dendritic carbazole-based donors 9'H-9,3':6'9″-tercarbazole (terCBz) and N3,N3,N6,N6-tetra-p-tolyl-9H-carbazole-3,6-diamine (TTAC). Due to the strongly donating and highly twisted nature of the TTAC donor as well as the spatially separated hole-particle wavefunctions, three of the five compounds exhibited thermally activated delayed fluorescence (TADF) in spite of a relatively large ΔE_ST measured through phosphorimetry (0.33-0.37 eV). These materials demonstrated photoluminescence quantum yields as high as 0.89 in toluene, with emission maxima ranging from 474 to 495 nm in the solid state. Additionally, two materials containing only terCBZ donor(s) exhibited deep blue fluorescence, with Commission Internationale de l'éclairage coordinates of (0.16, 0.05); the weaker nature of the terCBz donor results in a prohibitively large ΔE_ST (0.68-0.77 eV). A gap-tuned range-separated hybrid functional (ωB97XD*) was used to rigorously calculate triplet energies, while a systematic analysis of electronic structures and photophysical properties provided further insight into the properties of these materials. These findings ultimately contribute a synthetically facile approach toward highly emissive TADF emitters using a 1,3,4-oxadiazole motif.

Thermally Assisted Fluorescent Polymers: Polycyclic Aromatic Materials for High Color Purity and White-Light Emission

Thermally activated delayed fluorescence (TADF) sensitization of fluorescence is a promising strategy to improve the color purity and operational lifetime of conventional TADF organic light-emitting diodes (OLEDs). Here, we propose a new design strategy for TADF-sensitized fluorescence based on acrylic polymers with a pendant energy-harvesting host, a TADF sensitizer, and fluorescent emitter monomers. Fluorescent emitters were rationally designed from a series of homologous polycyclic aromatic amines, resulting in efficient and color-pure polymeric fluorophores capable of harvesting both singlet and triplet excitons. Macromolecular analogues of blue, green, and yellow fourth-generation OLED emissive layers were prepared in a facile manner by Cu(0) reversible deactivation radical polymerization, with emission quantum yields up to 0.83 in air and narrow emission bands with full width at half-maximum as low as 57 nm. White-light emission can easily be achieved by enforcing incomplete energy transfer between a deep blue TADF sensitizer and yellow fluorophore to yield a single white-emissive polymer with CIE coordinates (0.33, 0.39) and quantum yield 0.77. Energy transfer to the fluorescent emitters occurs at rates of 1-4 × 10⁸ s^-1, significantly faster than deactivation caused by internal conversion or intersystem crossing. Rapid energy transfer facilitates high triplet exciton utilization and efficient sensitized emission, even when TADF emitters with a low quantum yield are used as photosensitizers. Our results indicate that a broad library of untapped polymers exhibiting efficient TADF-sensitized fluorescence should be readily accessible from known TADF materials, including many monomers previously thought unsuitable for use in OLEDs.

1,8-Naphthalimide-Based Polymers Exhibiting Deep-Red Thermally Activated Delayed Fluorescence and Their Application in Ratiometric Temperature Sensing

A series of naphthalimide (NAI)-based red-emissive thermally activated delayed fluorescence (TADF) acrylic monomers has been designed and synthesized. When copolymerized with a host material by Cu(0)-reversible deactivation radical polymerization (Cu(0)-RDRP), polymers exhibiting orange to deep-red TADF were obtained with quantum yields of up to 58% in solution and 31% in the solid state. These emitters exhibit dual emission consisting of high-energy prompt fluorescence from the NAI acceptor (λ_max = 340 nm in toluene) and red-delayed fluorescence from the charge-transfer process (λ_max = 633-711 nm in toluene). This dual emissive property was utilized to create red-to-blue temperature-responsive polymers by copolymerization of NAI-DMAC with N-isopropylacrylamide and a blue fluorescent dopant. These polymers exhibit red TADF at room temperature and blue fluorescence at 70 °C, with a high ratiometric fluorescent thermal response of 32 ± 4% K^-1. Such systems are anticipated to have utility in bioimaging, drug delivery, and temperature sensing, further expanding the range of applications for red TADF materials.

Stimuli-Responsive Thermally Activated Delayed Fluorescence in Polymer Nanoparticles and Thin Films: Applications in Chemical Sensing and Imaging

Though molecules exhibiting thermally activated delayed fluorescence (TADF) have seen extensive development in organic light-emitting diodes, their incorporation into polymer nanomaterials and thin films has led to a range of applications in sensing and imaging probes. Triplet quenching can be used to probe oxygen concentration, and the reverse intersystem crossing mechanism which gives rise to TADF can also be used to measure temperature. Moreover, the long emission lifetimes of TADF materials allows for noise reduction in time-gated microscopy, making these compounds ideal for time-resolved fluorescence imaging (TRFI). A polymer matrix enables control over energy transfer between molecules, and can be used to modulate TADF behavior, solubility, biocompatibility, or desirable mechanical properties. Additionally, a polymer's oxygen permeability can be tuned to suit imaging applications in a range of media. Here we review the applications of polymer nanoparticles and films exhibiting TADF in sensing and imaging, demonstrating that this class of materials has great potential beyond electroluminescent devices still waiting to be explored.

Room temperature crystallization of amorphous polysiloxane using photodimerization

Bulk crystallization in flexible polymeric systems is difficult to control due to the random orientation of the chains. Here we report a photo cross-linking strategy that results in simultaneous cross-linking and crystallization of polysiloxane chains into millimeter sized leaf-like polycrystalline structures. Polymers containing pendant anthracene groups are prepared and undergo [4+4] photocycloaddition under 365 nm irradiation at room temperature. The growth and morphology of the crystalline structures is studied using polarized optical microscopy (POM) and atomic force microscopy and is found to progress through three unique stages of nucleation, growth, and constriction. The mobility of the individual chains is probed using pulsed-field gradient (PFG) NMR to provide insights into the diffusion processes that may govern chain transport to the growing crystal fronts. The room temperature crystallization of this conventionally amorphous polymer system may allow for a new level of morphological control for silicone materials.

Color-Tunable Thermally Activated Delayed Fluorescence in Oxadiazole-Based Acrylic Copolymers: Photophysical Properties and Applications in Ratiometric Oxygen Sensing

Polymer-based emitters are a promising route to the production of low-cost, scalable solution-processable luminescent materials. Here we describe a series of acrylic oxadiazole-based donor-acceptor monomers with tunable emission from blue to orange, with quantum yields as high as 96%. By introducing structural constraints that limit donor-acceptor orbital overlap, thermally activated delayed fluorescence (TADF) was observed in these materials. Polymerization by Cu(0) reversible deactivation radical polymerization (RDRP) gave high-molecular-weight copolymers (M_n > 20 kDa) with dispersities ranging from 1.10 to 1.45, using a room-temperature procedure with Cu wire as a catalyst. One of these materials, which had phenothiazine as donor moiety, exhibited conformationally dependent dual emission, giving a mixture of prompt fluorescence and delayed fluorescence peaks, whose relative ratios varied based on the amount of O₂ present during measurement. We demonstrate that this material can combine prompt and delayed fluorescence to act as a single-component, all-organic, ratiometric oxygen sensor without external calibrant. Application to ratiometric oxygen sensing is demonstrated both using a polymer thin film and via incorporation of this material into water-soluble polymer dots (Pdots), with a ratiometric response to O₂ throughout the range of partial pressures relevant to biological environments.

Self-assembly of luminescent triblock bottlebrush copolymers in solution

Self-assembly presents bottom-up strategies for the construction of complex micelles from luminescent bottlebrush copolymers.

Self-assembly of giant bottlebrush block copolymer surfactants from luminescent organic electronic materials

Bottlebrush copolymers have shown promise as building blocks for self-assembled nanomaterials due to their reduced chain entanglement relative to linear polymers and their ability to self-assemble with remarkably low critical micelle concentrations (CMCs). Concurrently, the preparation of bottlebrush polymers from organic electronic materials has recently been described, allowing multiple optoelectronic functions to be incorporated along the length of single bottlebrush strands. Here we describe the self-assembly of bottlebrush surfactants containing soluble n-butyl acrylate blocks and carbazole-based organic semiconductors, which self-assemble in selective solvent to give spherical micelles with CMCs below 54 nM. These narrowly dispersed structures were stable in solution at high dilution over periods of months, and could further be functionalized with fluorescent dyes to give micelles with quantum yields of 100%. These results demonstrate that bottlebrush-based nanostructures can be formed from organic semiconductor building blocks, opening the door to the preparation of fluorescent or redox-active micelles from giant polymeric surfactants.

Cu(0)-RDRP as an efficient and low-cost synthetic route to blue-emissive polymers for OLEDs

Cu(0)-RDRP has been used to prepare deep-blue emissive polymers for OLEDs using a simple room-temperature procedure with copper wire catalyst.