Biodegradable polymeric nanoparticles based drug delivery systems

Constructing a cell microenvironment with biomaterial scaffolds for stem cell therapy

Stem cell therapy is widely recognized as a promising strategy for exerting therapeutic effects after injury in degenerative diseases. However, limitations such as low cell retention and survival rates after transplantation exist in clinical applications. In recent years, emerging biomaterials that provide a supportable cellular microenvironment for transplanted cells have optimized the therapeutic efficacy of stem cells in injured tissues or organs. Advances in the engineered microenvironment are revolutionizing our understanding of stem cell-based therapies by co-transplanting with synthetic and tissue-derived biomaterials, which offer a scaffold for stem cells and propose an unprecedented opportunity to further employ significant influences in tissue repair and regeneration.

Nanomedicine and Periodontal Regenerative Treatment

Current periodontal treatments aim to control bacterial infection and decrease inflammation. To optimize contemporary conventional treatments that present limitations owing to an inability to reach the lesion site, new methods are based on nanomedicine. Nanomedecine allows delivery of host-modulatory drugs or antibacterial molecules at the lesion site in an optimal concentration with decreased toxicity and risk of systemic side effects. Chitosan and polylactic-co-glycolic acid-loaded nanoparticles, carbon quantum dots, and mesoporous silicates open new perspectives in periodontitis management. The potential therapeutic impact of the main nanocarriers is discussed.

Direct Pore-Level Visualization and Verification of In Situ Oil-in-Water Pickering Emulsification during Polymeric Nanogel Flooding for EOR in a Transparent Three-Dimensional Micromodel

Different from inorganic nanoparticles, nanosized cross-linked polymeric nanoparticles (nanogels) have been demonstrated to generate more stable Pickering emulsions under harsh conditions for a long term owing to their inherent high hydrophilicity and surface energy. In both core and pore scales, the emulsions are found to be able to form in situ during the nanofluid flooding process for an enhanced oil recovery (EOR) process. Due to the limitation of direct visualization in core scale or deficient pore geometries built by two-dimensional micromodels, the in situ emulsification by nanofluids and emulsion transport are still not being well understood. In this work, we use a three-dimensional transparent porous medium to directly visualize the in situ emulsification during the nanogel flooding process for EOR after water flooding. By synthesizing the nanogel with a fluorescent dye, we find the nanogels adsorbed on the oil-water interface to lower the total interfacial energy and emulsify the large oil droplets into small Pickering oil-in-water emulsions. A potential mechanism for in situ emulsification by nanogels is proposed and discussed. After nanogel flooding, the emulsions trapped in pore throats and those in the effluents are all found encapsulated by the nanogels. After nanogel flooding under different flow rates, the sphericity and diameter changes of remaining oil droplets are quantitatively compared and analyzed using grouped boxplots. It is concluded that in situ emulsification happens during nanogel injection due to the reduction of interfacial tension, which helps to increase the oil recovery rate under different flow rates and pore geometries.

Pharmaceutical Applications of Supercritical Fluid Extraction of Emulsions for Micro-/Nanoparticle Formation

Micro-/nanoparticle formulations containing drugs with or without various biocompatible excipients are widely used in the pharmaceutical field to improve the physicochemical and clinical properties of the final drug product. Among the various micro-/nanoparticle production technologies, emulsion-based particle formation is the most widely used because of its unique advantages such as uniform generation of spherical small particles and higher encapsulation efficiency (EE). For this emulsion-based micro-/nanoparticle technology, one of the most important factors is the extraction efficiency associated with the fast removal of the organic solvent. In consideration of this, a technology called supercritical fluid extraction of emulsions (SFEE) that uses the unique mass transfer mechanism and solvent power of a supercritical fluid (SCF) has been proposed to overcome the shortcomings of several conventional technologies such as solvent evaporation, extraction, and spray drying. This review article presents the main aspects of SFEE technology for the preparation of micro-/nanoparticles by focusing on its pharmaceutical applications, which have been organized and classified according to several types of drug delivery systems and active pharmaceutical ingredients. It was definitely confirmed that SFEE can be applied in a variety of drugs from water-soluble to poorly water-soluble. In addition, it has advantages such as low organic solvent residual, high EE, desirable release control, better particle size control, and agglomeration prevention through efficient and fast solvent removal compared to conventional micro-/nanoparticle technologies. Therefore, this review will be a good resource for determining the applicability of SFEE to obtain better pharmaceutical quality when researchers in related fields want to select a suitable manufacturing process for preparing desired micro-/nanoparticle drug delivery systems containing their active material.

Physico-Chemical, In Vitro and Ex Vivo Characterization of Meloxicam Potassium-Cyclodextrin Nanospheres

Nasal drug delivery has many beneficial properties, such as avoiding the first pass metabolism and rapid onset of action. However, the limited residence time on the mucosa and limited absorption of certain molecules make the use of various excipients necessary to achieve high bioavailability. The application of mucoadhesive polymers can increase the contact time with the nasal mucosa, and permeation enhancers can enhance the absorption of the drug. We aimed to produce nanoparticles containing meloxicam potassium (MEL-P) by spray drying intended for nasal application. Various cyclodextrins (hydroxypropyl-β-cyclodextrin, α-cyclodextrin) and biocompatible polymers (hyaluronic acid, poly(vinylalcohol)) were used as excipients to increase the permeation of the drug and to prepare mucoadhesive products. Physico-chemical, in vitro and ex vivo biopharmaceutical characterization of the formulations were performed. As a result of spray drying, mucoadhesive nanospheres (average particle size <1 µm) were prepared which contained amorphous MEL-P. Cyclodextrin-MEL-P complexes were formed and the applied excipients increased the in vitro and ex vivo permeability of MEL-P. The highest amount of MEL-P permeated from the α-cyclodextrin-based poly(vinylalcohol)-containing samples in vitro (209 μg/cm²) and ex vivo (1.47 μg/mm²) as well. After further optimization, the resulting formulations may be promising for eliciting a rapid analgesic effect through the nasal route.

Systematic Combination of Oligonucleotides and Synthetic Polymers for Advanced Therapeutic Applications

The potential of oligonucleotides is exceptional in therapeutics because of their high safety, potency, and specificity compared to conventional therapeutic agents. However, many obstacles, such as low in vivo stability and poor cellular uptake, have hampered their clinical success. Use of polymeric carriers can be an effective approach for overcoming the biological barriers and thereby maximizing the therapeutic efficacy of the oligonucleotides due to the availability of highly tunable synthesis and functional modification of various polymers. As loaded in the polymeric carriers, the therapeutic oligonucleotides, such as antisense oligonucleotides, small interfering RNAs, microRNAs, and even messenger RNAs, become nuclease-resistant by bypassing renal filtration and can be efficiently internalized into disease cells. In this review, we introduced a variety of systematic combinations between the therapeutic oligonucleotides and the synthetic polymers, including the uses of highly functionalized polymers responding to a wide range of endogenous and exogenous stimuli for spatiotemporal control of oligonucleotide release. We also presented intriguing characteristics of oligonucleotides suitable for targeted therapy and immunotherapy, which can be fully supported by versatile polymeric carriers.

Tween® Preserves Enzyme Activity and Stability in PLGA Nanoparticles

Enzymes, as natural and potentially long-term treatment options, have become one of the most sought-after pharmaceutical molecules to be delivered with nanoparticles (NPs); however, their instability during formulation often leads to underwhelming results. Various molecules, including the Tween^® polysorbate series, have demonstrated enzyme activity protection but are often used uncontrolled without optimization. Here, poly(lactic-co-glycolic) acid (PLGA) NPs loaded with β-glucosidase (β-Glu) solutions containing Tween^® 20, 60, or 80 were compared. Mixing the enzyme with Tween^® pre-formulation had no effect on particle size or physical characteristics, but increased the amount of enzyme loaded. More importantly, NPs made with Tween^® 20:enzyme solutions maintained significantly higher enzyme activity. Therefore, Tween^® 20:enzyme solutions ranging from 60:1 to 2419:1 mol:mol were further analyzed. Isothermal titration calorimetry analysis demonstrated low affinity and unquantifiable binding between Tween^® 20 and β-Glu. Incorporating these solutions in NPs showed no effect on size, zeta potential, or morphology. The amount of enzyme and Tween^® 20 in the NPs was constant for all samples, but a trend towards higher activity with higher molar rapports of Tween^® 20:β-Glu was observed. Finally, a burst release from NPs in the first hour with Tween^®:β-Glu solutions was the same as free enzyme, but the enzyme remained active longer in solution. These results highlight the importance of stabilizers during NP formulation and how optimizing their use to stabilize an enzyme can help researchers design more efficient and effective enzyme loaded NPs.

Naringin as Sustained Delivery Nanoparticles Ameliorates the Anti-inflammatory Activity in a Freund's Complete Adjuvant-Induced Arthritis Model

Naringin (NAR), a naturally occurring essential flavonoid, present in grapefruit and Chinese herbal medicines, creates great interest in researchers due to its diverse biological and pharmacological activities. However, further development of NAR is hindered due to its poor water solubility and dissolution rates in GIT. To address these limitations, in this study, we report polymeric nanoparticles (NPs) of NAR (NAR-PLGA-NPs) for enhancing the oral NAR efficiency, with a biodegradable polymer (PLGA) to improve its absorption and bioavailability. NAR-PLGA-NPs were fabricated by a modified solvent emulsification-evaporation technique. Physicochemical properties were evaluated by SEM, particle size distribution, entrapment efficiency, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). In vitro drug release and ex vivo permeation studies were carried out in phosphate buffer (pH 6.8) for 24 h. Furthermore, in vivo anti-arthritic studies were performed on a mouse model, and the results were compared with free NAR. The modulation of inflammatory mediators was also evidently supported by docking studies. Optimized nanoformulation FN4 (NAR-PLGA-NPs) prepared with acetone-ethanol (2:1) as a solvent system in a combination of stabilizers, i.e., poloxamer-188 and sodium deoxylate (1:1), along with 2% PVA solution, was prepared. From size characterization studies, it was observed that nanoformulations possessed a low particle size (179.7 ± 2.05 nm), a low polydispersity index (0.206 ± 0.001), and a negative zeta potential (-9.18 ± 0.78 mV) with a maximum entrapment efficiency (74 ± 3.61%). The drug release followed a Korsmeyer-Peppas release kinetic model (anomalous non-Fickian diffusion), providing greater NAR release after lyophilization (82.11 ± 3.65%) drug release in pH 6.8 phosphate buffer for 24 h. Ex vivo permeation analysis through an isolated goat intestinal membrane revealed 80.02 ± 3.69% drug release in 24 h. Encapsulation of a drug into PLGA is well described by the results of FTIR, DSC, and XRD. Finally, the therapeutic efficacy of optimized FN4 (NAR-PLGA-NPs) and its possible application on RA were further confirmed in a Freund's complete adjuvant-induced rat arthritic model as against free NAR at a dose of 20 mg/kg body wt. Our findings demonstrate that sustained action of NAR from optimized FN4 NPs with a rate-controlling polymeric carrier system exhibited prolonged circulation time and reduced arthritic inflammation, hence indicating the possibility as a novel strategy to secure the unpropitious biological interactions of hydrophobic NAR in a gastric environment.

Development of next generation nanomedicine-based approaches for the treatment of cancer: we've barely scratched the surface

Interest in nanomedicines has grown rapidly over the past two decades, owing to the promising therapeutic applications they may provide, particularly for the treatment of cancer. Personalised medicine and 'smart' actively targeted nanoparticles represent an opportunity to deliver therapies directly to cancer cells and provide sustained drug release, in turn providing overall lower off-target toxicity and increased therapeutic efficacy. However, the successful translation of nanomedicines from encouraging pre-clinical findings to the clinic has, to date, proven arduous. In this review, we will discuss the use of nanomedicines for the treatment of cancer, with a specific focus on the use of polymeric and lipid nanoparticle delivery systems. In particular, we examine approaches exploring the surface functionalisation of nanomedicines to elicit active targeting and therapeutic effects as well as challenges and future directions for nanoparticles in cancer treatment.

High antibacterial performance of hydrophobic chitosan-based nanoparticles loaded with Carvacrol

Bacterial infections have become one of the top ten public health concerns worldwide. These problems are aggravated with the emergence of multi-drug resistant bacterial strains. Thus, it is necessary to adopt novel technological strategies, such as development of bionanomaterials to prevent the infection, and treat this kind of bacteria. At this regard, the chemical modification of chitosan (Cs), by the covalent attachment of a hydrocarbon chain (octanoic acid), was developed to obtain hydrophobic chitosan (HCs). Then, HCs was used to synthetize nanoparticles using the well-known ionotropic gelation approach, optimizing the parameters, such as the TPP/HCs ratio and pH solution to get stable nanoparticles. Then, carvacrol (CAR) was loaded into NPs (HCs-CAR NPs) using different concentrations of 25%, 50% and 75% (%w/w CAR/HCs). The physicochemical properties for HCs-CAR NPs prepared at 50% of CAR stood out from the rest, showing a spherical morphology, with a size of 200 nm, Z potential of 10.4 mV and encapsulation efficiency of 56.28%. These formulations were chosen to evaluate the antibacterial activity, using Gram-negative (Escherichia coli) and Gram-positive bacterial model (Staphylococcus aureus). The HCs-CAR NPs showed great activity against both bacterial models, being more effective against Gram (+) strain (S. aureus), suggesting the potential application of these NPs as novel biomaterial to treat bacterial infection.

Molecular structure, interactions, and antimicrobial properties of curcumin-PLGA Complexes-a DFT study

Density functional calculations are performed to study the molecular structure, interactions, and antimicrobial activity of curcumin-poly lacto glycolic acid (Cur-PLGA) complexes. The calculations are performed on curcumin (Cur), glycolic acid (SSC and AAT conformers), lactic acid (LA), Cur-SSC, Cur-AAT, Cur-LA, and Cur-PLGA complexes using dispersion corrected M06-2X functional with 6-31 + G* basis set. The condensed Fukui functions of Cur are calculated to identify the favorable reactive sites. Inter- and intramolecular H-bond interactions are analyzed in detail through natural bond orbital, Atoms in Molecule, and Reduced density gradient analyses. The interaction energy values indicate that the interaction between Cur and AAT is stronger than the other studied complexes. Further, our calculations show that the PLGA interacted with Cur is having lower LUMO energy and density values. This indicates that the antimicrobial activity is high in this complex.

Surface engineered nanocarriers for the management of breast cancer

Breast cancer is commonly known life-threatening malignancy in women after lung cancer. The standard of care (SOC) treatment for breast cancer primarily includes surgery, radiotherapy, hormonal therapy, and chemotherapy. However, the effectiveness of conventional chemotherapy is restricted by several limitations such as poor targeting, drug resistance, poor drug delivery, and high toxicity. Nanoparticulate drug delivery systems have gained a lot of interest in the scientific community because of its unique features and promising potential in breast cancer diagnosis and treatment. The unique physicochemical and biological properties of the nanoparticulate drug delivery systems promotes the drug accumulation, Pharmacokinetic profile towards the tumor site and thereby, reduces the cytotoxicity towards healthy cells. In addition, to improve tumor-specific drug delivery, researchers have focused on surface engineered nanocarrier system with targeting molecules/ligands that are specific to overexpressed receptors present on cancer cells. In this review, we have summarized the different biological ligands and surface-engineered nanoparticles, enlightening the physicochemical characteristics, toxic effects, and regulatory considerations of nanoparticles involved in treatment of breast cancer.

Fabrication of 3D Printed Poly(lactic acid)/Polycaprolactone Scaffolds Using TGF-β1 for Promoting Bone Regeneration

Our research was designed to evaluate the effect on bone regeneration with 3-dimensional (3D) printed polylactic acid (PLA) and 3D printed polycaprolactone (PCL) scaffolds, determine the more effective option for enhancing bone regeneration, and offer tentative evidence for further research and clinical application. Employing the 3D printing technique, the PLA and PCL scaffolds showed similar morphologies, as confirmed via scanning electron microscopy (SEM). Mechanical strength was significantly higher in the PLA group (63.4 MPa) than in the PCL group (29.1 MPa) (p < 0.01). Average porosity, swelling ratio, and degeneration rate in the PCL scaffold were higher than those in the PLA scaffold. SEM observation after cell coculture showed improved cell attachment and activity in the PCL scaffolds. A functional study revealed the best outcome in the 3D printed PCL-TGF-β₁ scaffold compared with the 3D printed PCL and the 3D printed PCL-Polydopamine (PDA) scaffold (p < 0.001). As confirmed via SEM, the 3D printed PCL- transforming growth factor beta 1 (TGF-β₁) scaffold also exhibited improved cell adhesion after 6 h of cell coculture. The 3D printed PCL scaffold showed better physical properties and biocompatibility than the 3D printed PLA scaffold. Based on the data of TGF-β₁, this study confirms that the 3D printed PCL scaffold may offer stronger osteogenesis.

Extraction and Encapsulation of Phenolic Compounds of Tunisian Rosemary (Rosmarinus officinalis L.) Extracts in Silk Fibroin Nanoparticles

Rosemary (Rosmarinus officinalis L.) is known to be an effective potential source of natural antioxidants which confer benefits to human health. Their bioactive properties are mainly due to phenolic compounds but these molecules are highly vulnerable to oxidants, light, heat, pH, water and enzymatic activities. Therefore, the stability and shelf life of phenolic compounds should be increased by being protected from chemical and physical damage by means of encapsulation prior to application. Encapsulation is becoming increasingly important in the pharmaceutical, food, cosmetics, textile, personal care, chemical, biotechnology, and medicinal industries due to its potential for stabilization and delivery of delicate and precious bioactive compounds. The aim of the present work was to describe the polyphenolic profile of Tunisian Rosemary, collected from two different bioclimatic areas, and further loading in silk fibroin nanoparticles. The loaded nanoparticles were characterized in terms of morphology, size, polydispersity, Z-potential, secondary structure of the protein, encapsulation efficiency, loading content, and antioxidant activity. On one hand, HPLC analysis revealed the presence of 18 polyphenolic compounds of whichcarnosic acid and carnosol were found to be the most abundant compounds (46.3 to 76.4 and 22.4 to 43.5 mg of compound per gram of dry plant weight (mg/g DPW) respectively), Total phenolic content (TPC) ranged from 85.8 to 137.3 mg of gallic acid equivalent (GAE)/g DPW in post-distilled rosemary extracts andantioxidant activity reached the values of 5.9 to 8.3 µmol of ascorbic acid equivalent (AAE)/g DPW). On the other hand loaded nanoparticles were almost spherical and presented nanometric size and negative Z-potential. Although the encapsulation efficiency in silk fibroin nanoparticles and the drug loading content were low in the conditions of the assay, the encapsulated polyphenols retained near 85% of the radical scavenging activity against DPPH· after 24 h. of incubation at 37 °C. The results showed that post-distilled rosemary residues had an effective potential as natural antioxidants due to their significant antioxidant activity and seemed to be useful in both pharmaceutical and food industries with beneficial properties that might confer benefits to human health and these silk fibroin nanoparticles loaded with rosemary extracts are thus a promising combination for several applications in food technology or nanomedicine.

Advances and challenges in the nanoparticles-laden contact lenses for ocular drug delivery

The delivery of drugs that target ocular tissues is challenging due to the physiological barriers of the eye like tear dilution, nasolacrimal drainage, blinking, tear turnover rate and low residence time Drug-laden contact lenses can be a possible solution to overcome some of these challenges. Nanoparticles are being extensively studied as novel systems for loading drugs into therapeutic contact lenses. The versatile features of the organic and inorganic nanoparticles and their diverse physicochemical properties make it possible to load and sustain drug release from the contact lenses. Nevertheless, several issues remains to be solved before its clinical application and commercialization such as changes in contact lens swelling (water content), transmittance, protein adherence, surface roughness, tensile strength, ion and oxygen permeability and drug leaching during contact lens manufacture. However, clinical studies demonstrated the potential of therapeutic contact lenses to manage the scientific, commercial and regulatory challenges to make its place in the market. This review highlights the different methodologies used to fabricate nanoparticle-laden contact lenses and highlights the major advances and challenges to commercialization.

Stabilization by Nano Spray Dryer of Pioglitazone Polymeric Nanosystems: Development, In Vivo, Ex Vivo and Synchrotron Analysis

Pioglitazone-loaded PLGA-PEG nanoparticles (NPs) were stabilized by the spray drying technique as an alternative to the treatment of ocular inflammatory disorders. Pioglitazone-NPs were developed and characterized physiochemically. Interaction studies, biopharmaceutical behavior, ex vivo corneal and scleral permeation, and in vivo bioavailability evaluations were conducted. Fibrillar diameter and interfibrillar corneal spacing of collagen was analyzed by synchrotron X-ray scattering techniques and stability studies at 4 °C and was carried out before and after the spray drying process. NPs showed physicochemical characteristics suitable for ocular administration. The release was sustained up to 46 h after drying; ex vivo corneal and scleral permeation profiles of pioglitazone-NPs before and after drying demonstrated higher retention and permeation through cornea than sclera. These results were correlated with an in vivo bioavailability study. Small-angle X-ray scattering (SAXS) analysis did not show a significant difference in the organization of the corneal collagen after the treatment with pioglitazone-NPs before and after the drying process, regarding the negative control. The stabilization process by Nano Spray Dryer B-90 was shown to be useful in preserving the activity of pioglitazone inside the NPs, maintaining their physicochemical characteristics, in vivo bioavailability, and non-damage to corneal collagen function after SAXS analysis was observed.

Polymer Scaffolds-Enhanced Bone Regeneration in Osteonecrosis Therapy

Osteonecrosis without effective early treatment eventually leads to the collapse of the articular surface and causes arthritis. For the early stages of osteonecrosis, core decompression combined with bone grafting, is a procedure worthy of attention and clinical trial. And the study of bone graft substitutes has become a hot topic in the area of osteonecrosis research. In recent years, polymers have received more attention than other materials due to their excellent performance. However, because of the harsh microenvironment in osteonecrosis, pure polymers may not meet the stringent requirements of osteonecrosis research. The combined application of polymers and various other substances makes up for the shortcomings of polymers, and to meet a broad range of requirements for application in osteonecrosis therapy. This review focuses on various applying polymers in osteonecrosis therapy, then discusses the development of biofunctionalized composite polymers based on the polymers combined with different bioactive substances. At the end, we discuss their prospects for translation to clinical practice.

Review: Development of SARS-CoV-2 immuno-enhanced COVID-19 vaccines with nano-platform

Vaccination is the most effective way to prevent coronavirus disease 2019 (COVID-19). Vaccine development approaches consist of viral vector vaccines, DNA vaccine, RNA vaccine, live attenuated virus, and recombinant proteins, which elicit a specific immune response. The use of nanoparticles displaying antigen is one of the alternative approaches to conventional vaccines. This is due to the fact that nano-based vaccines are stable, able to target, form images, and offer an opportunity to enhance the immune responses. The diameters of ultrafine nanoparticles are in the range of 1-100 nm. The application of nanotechnology on vaccine design provides precise fabrication of nanomaterials with desirable properties and ability to eliminate undesirable features. To be successful, nanomaterials must be uptaken into the cell, especially into the target and able to modulate cellular functions at the subcellular levels. The advantages of nano-based vaccines are the ability to protect a cargo such as RNA, DNA, protein, or synthesis substance and have enhanced stability in a broad range of pH, ambient temperatures, and humidity for long-term storage. Moreover, nano-based vaccines can be engineered to overcome biological barriers such as nonspecific distribution in order to elicit functions in antigen presenting cells. In this review, we will summarize on the developing COVID-19 vaccine strategies and how the nanotechnology can enhance antigen presentation and strong immunogenicity using advanced technology in nanocarrier to deliver antigens. The discussion about their safe, effective, and affordable vaccines to immunize against COVID-19 will be highlighted.

Levofloxacin-Loaded Nanosonosensitizer as a Highly Efficient Therapy for Bacillus Calmette-Guérin Infections Based on Bacteria-Specific Labeling and Sonotheranostic Strategy

Purpose

The rapid emergence of multidrug-resistant Mycobacterium tuberculosis (MTB) poses a significant challenge to the treatment of tuberculosis (TB). Sonodynamic antibacterial chemotherapy (SACT) combined with sonosensitizer-loaded nanoparticles with targeted therapeutic function is highly expected to eliminate bacteria without fear of drug resistance. This study aimed to investigate the antibacterial effect and underlying mechanism of levofloxacin-loaded nanosonosensitizer with targeted therapeutic function against Bacillus Calmette-Guérin bacteria (BCG, an MTB model).

Methods

This study developed levofloxacin-loaded PLGA-PEG (poly lactide-co-glycolide-polyethylene glycol) nanoparticles with BM2 aptamer conjugation on its surface using the crosslinking agents EDC and NHS (BM2-LVFX-NPs). The average diameter, zeta potential, morphology, drug-loading properties, and drug release efficiency of the BM2-LVFX-NPs were investigated. In addition, the targeting and toxicity of BM2-LVFX-NPs in the subcutaneous BCG infection model were evaluated. The biosafety, reactive oxygen species (ROS) production, cellular phagocytic effect, and antibacterial effect of BM2-LVFX-NPs in the presence of ultrasound stimulations (42 kHz, 0.67 W/cm², 5 min) were also systematically evaluated.

Results

BM2-LVFX-NPs not only specifically recognized BCG bacteria in vitro but also gathered accurately in the lesion tissues. Drugs loaded in BM2-LVFX-NPs with the ultrasound-responsive feature were effectively released compared to the natural state. In addition, BM2-LVFX-NPs exhibited significant SACT efficiency with higher ROS production levels than others, resulting in the effective elimination of bacteria in vitro. Meanwhile, in vivo experiments, compared with other options, BM2-LVFX-NPs also exhibited an excellent therapeutic effect in a rat model with BCG infection after exposure to ultrasound.

Conclusion

Our work demonstrated that a nanosonosensitizer formulation with LVFX could efficiently translocate therapeutic drugs into the cell and improve the bactericidal effects under ultrasound, which could be a promising strategy for targeted therapy for MTB infections with high biosafety.

Biomimetic amphiphilic FAAP NPs nanoparticles: Synthesis, characterization and antivirus activity

Antiviral agents based on natural products have attracted substantial attention in clinical applications for their distinct biological activities,molecular structuralmultiformities, and low biotoxicities. Ferulic acid (FA) with apigenin propaneto form an esterified FA derivative (FAAP).Herein, we designed a CsPbBr3-modified chitosan oligosaccharide, a biomimetic nanoplatform that could load with FAAP. After self-assembly by combining FAAP with CsPbBr3-modified chitosan oligosaccharide (FAAP NPs), the resulting nanoparticles (FAAP NPs) showed high antioxidant and anti-inflammatory activities for enhancing the inhibition of porcineparvovirus.FAAP NPs exhibited no signs of acute toxicity in vitro or in vivo. DPPH and ABST are widely used for quantitative determination of antioxidant capacity. FAAP NPs exhibited excellent DPPH and ABTS radical scavenging abilities. In addition, we found that FAAP NPs inhibited PPV infection-induced PK-15 cell apoptosis, which was associated with regulating antioxidant and anti-inflammatory signaling pathways. Importantly, we showed that FAAP NPs blocked PPV infection-induced mitochondrial apoptosis in PK-15 cells via a p53/BH3 domain molecular-dependent mechanism.

Biodegradable Hypocrellin B nanoparticles coated with neutrophil membranes for hepatocellular carcinoma photodynamics therapy effectively via JUNB/ROS signaling

Hepatocellular carcinoma (HCC) is an inflammation-induced and chemotherapy-resistant common liver cancer, and a major cause of death. Some natural products have been found to be used as photosensitizers in photodynamic therapy of HCC. Due to its specific molecular structure diversities and biological activities, current status of HCC treatment with nature production remains unsatisfactory, owing largely to the toxicity, side effect and inefficiency to drug targeting. Herein, we show a nanoparticle-based broad-spectrum anti-inflammatory strategy that naïve neutrophil membrane-coated PLGA nanoparticles (NM-HB NPs) were constructed for synchronous nearinfrared fluorescence (NIR FL) imaging and photodynamic therapy (PDT) for HCC. Moreover, NM-HB NPs inhibited the expression of JUNB and promoted the ROS production. JUNB depletion enhanced the anti-HCC effect of NM-HB NPs. Importantly, it was shown that NM-HB NPs are well targeted to the tumor site and overcomes the blood circulation and immune elimination in vivo and vitro. In a mouse model of HCC, the neutrophil membrane-coated nanoparticles (NM-HB NPs) show significant therapeutic efficacy by PDT and suppressing tumor tissue increase. All results demonstrated that NM coated HB NPs representing a viable and effective treatment option for HCC.

Resveratrol-Loaded Levan Nanoparticles Produced by Electrohydrodynamic Atomization Technique

Considering the significant advances in nanostructured systems in various biomedical applications and the escalating need for levan-based nanoparticles as delivery systems, this study aimed to fabricate levan nanoparticles by the electrohydrodynamic atomization (EHDA) technique. The hydrolyzed derivative of levan polysaccharide from Halomonas smyrnensis halophilic bacteria, hydrolyzed Halomonas levan (hHL), was used. Nanoparticles were obtained by optimizing the EHDA parameters and then they were characterized in terms of morphology, molecular interactions, drug release and cell culture studies. The optimized hHL and resveratrol (RS)-loaded hHL nanoparticles were monodisperse and had smooth surfaces. The particle diameter size of hHL nanoparticles was 82.06 ± 15.33 nm. Additionally, release of RS from the fabricated hHL nanoparticles at different pH conditions were found to follow the first-order release model and hHL with higher RS loading showed a more gradual release. In vitro biocompatibility assay with human dermal fibroblast cell lines was performed and cell behavior on coated surfaces was observed. Nanoparticles were found to be safe for healthy cells. Consequently, the fabricated hHL-based nanoparticle system may have potential use in drug delivery systems for wound healing and tissue engineering applications and surfaces could be coated with these electrosprayed particles to improve cellular interaction.

Development of a Polysaccharide-Based Hydrogel Drug Delivery System (DDS): An Update

Delivering a drug to the target site with minimal-to-no off-target cytotoxicity is the major determinant for the success of disease therapy. While the therapeutic efficacy and cytotoxicity of the drug play the main roles, the use of a suitable drug delivery system (DDS) is important to protect the drug along the administration route and release it at the desired target site. Polysaccharides have been extensively studied as a biomaterial for DDS development due to their high biocompatibility. More usefully, polysaccharides can be crosslinked with various molecules such as micro/nanoparticles and hydrogels to form a modified DDS. According to IUPAC, hydrogel is defined as the structure and processing of sols, gels, networks and inorganic–organic hybrids. This 3D network which often consists of a hydrophilic polymer can drastically improve the physical and chemical properties of DDS to increase the biodegradability and bioavailability of the carrier drugs. The advancement of nanotechnology also allows the construction of hydrogel DDS with enhanced functionalities such as stimuli-responsiveness, target specificity, sustained drug release, and therapeutic efficacy. This review provides a current update on the use of hydrogel DDS derived from polysaccharide-based materials in delivering various therapeutic molecules and drugs. We also highlighted the factors that affect the efficacy of these DDS and the current challenges of developing them for clinical use.

A Freezing and Thawing Method for Fabrication of Small Gelatin Nanoparticles with Stable Size Distributions for Biomedical Applications

BACKGROUND

Gelatin, a natural polymer, has a number of advantages as a material for fabricating nanoparticles, such as its hydrophilicity, biodegradability, nontoxicity, and biocompatibility, as well as low cost. Despite these various advantages, gelatin-based nanoparticles still have critical limitation for biomedical applications due to their relatively larger size than those of other materials.

METHODS

In this study, a new strategy to design and fabricate small gelatin nanoparticles (GNPs) was proposed. The technique was based on the natural phenomenon where with decreasing temperature, the compression between the molecules of substances increases and the volume shrinks.

RESULTS

The average size of the fabricated small GNPs was less than 100 nm and their gelatin properties (including non-cytotoxicity) were well maintained. The drug release profiles of the GNPs were confirmed, for which a simple mathematical model based on the conventional diffusion equation was proposed. There was a burst of drug release in the first 3 days, with different release profiles according to the concentration of model drugs loaded onto the GNPs. It was also demonstrated that the drug release profiles of the proposed mathematical model were consistent with the experimental results.

CONCLUSION

Our work proposes that these small GNPs could be used as efficient drug and gene delivery and tissue engineering platforms for various biomedical applications.

Phytoassisted synthesis and characterization of palladium nanoparticles (PdNPs); with enhanced antibacterial, antioxidant and hemolytic activities

With increasing demand for the treatment of microbial resistance around the globe, it is necessary to develop metallic nanoparticles , ideally by the use of nontoxic medium i.e. plant constituents, that could arrest the microbial growth. For this reason, small and highly crystalline PdNPs were effectively synthesized by using Eryngium caeruleum leaf extract as both the reducing and capping agent. During the synthesis of PdNPs, the size and shape were made controlled by using different solvents i.e., ethanol, methanol and aqueous extract of Eryngium caeruleum. A series of physicochemical characterizations were applied to inquire the synthesis, crystal structure, particles size, and surface morphology of PdNPs. Furthermore, the PdNPs demonstrated excellent potential for the inactivation of gram-positive and gram-negative bacteria, where the methanol-PdNPs exhibited maximum growth inhibition zones against tested bacteria as compared to ethanol-PdNPs and aqueous-PdNPs. Besides, PdNPs showed better antioxidant activity to effectively scavenge 2, 2 diphenyl-1-picrylhydrazyl (DPPH). More importantly, the synthesized PdNPs are not only active for ROS generation but also show no hemolytic activity. We believe that this greener approach uncovered the useful and efficient applications of highly active PdNPs and their biocompatibility.

Nanoencapsulation of Polyphenols as Drugs and Supplements for Enhancing Therapeutic Profile - A Review

Polyphenolic phytoconstituents have been widely in use worldwide since ages and are categorised as secondary metabolites of plants. The application of polyphenols such as quercetin, resveratrol. curcumin as nutritional supplement has been researched widely. The use of polyphenols, and specifically quercetin for improving the memory and mental endurance have shown significant effects among rats. Even though similar results has not been resonated among human but encouraging preclinical results have encouraged researchers to explore other polyphenols to study the effects as supplements among athletes. The phytopharmacological research has elucidated the use of natural polyphenols to prevent and treat various physiological and metabolic disorders owing to its free radical scavenging properties, anti-inflammatory, anti-cancer and immunomodulatory effects. In spite of the tremendous pharmacological profile, one of the most dominant problem regarding the use of polyphenolic compounds is their low bioavailability. Nanonization is considered as one of the most prominent approaches among many. This article aims to review and discuss the molecular mechanisms of recently developed nanocarrier-based drug delivery systems for polyphenols and its application as drugs and supplements. Nanoformulations of natural polyphenols are bioactive agents, such as quercetin, kaempferol, fisetin, rutin, hesperetin, and naringenin epigalloccatechin-3-gallate, genistein, ellagic acid, gallic acid, chlorogenic acid, ferulic acid, curcuminoids and stilbenes is expected to have better efficacy. These delivery systems are expected to provide higher penetrability of polyphenols at cellular levels and exhibit a controlled release of the drugs. It is widely accepted that natural polyphenols do demonstrate significant therapeutic effect. However, the hindrances in their absorption, specificity and bioavailability can be overcome using nanotechnology.

Optimisation of a Microfluidic Method for the Delivery of a Small Peptide

Peptides hold promise as therapeutics, as they have high bioactivity and specificity, good aqueous solubility, and low toxicity. However, they typically suffer from short circulation half-lives in the body. To address this issue, here, we have developed a method for encapsulation of an innate-immune targeted hexapeptide into nanoparticles using safe non-toxic FDA-approved materials. Peptide-loaded nanoparticles were formulated using a two-stage microfluidic chip. Microfluidic-related factors (i.e., flow rate, organic solvent, theoretical drug loading, PLGA type, and concentration) that may potentially influence the nanoparticle properties were systematically investigated using dynamic light scattering and transmission electron microscopy. The pharmacokinetic (PK) profile and biodistribution of the optimised nanoparticles were assessed in mice. Peptide-loaded lipid shell-PLGA core nanoparticles with designated size (~400 nm) and a sustained in vitro release profile were further characterized in vivo. In the form of nanoparticles, the elimination half-life of the encapsulated peptide was extended significantly compared with the peptide alone and resulted in a much higher distribution into the lung. These novel nanoparticles with lipid shells have considerable potential for increasing the circulation half-life and improving the biodistribution of therapeutic peptides to improve their clinical utility, including peptides aimed at treating lung-related diseases.

Hydrogel nanoparticle degradation influences the activation and survival of primary macrophages

The effect of nanoparticle (NP) internalization on cell fate has emerged as an important consideration for nanomedicine design, as macrophages and other phagocytes are the primary clearance mechanisms of administered NP formulations. Pro-survival signaling is thought to be concurrent with phagocytosis and recent work has shown increased macrophage survival following lysosomal processing of internalized NPs. These observations have opened the door to explorations of NP physiochemical properties aimed at tuning the NP-driven macrophage survival at the lysosomal synapse. Here, we report that NP-induced macrophage survival and activation is strongly dependent on NP degradation rate using a series of thiol-containing poly(ethylene glycol) diacrylate-based NPs of equivalent size and zeta potential. Rapidly degrading, high thiol-containing NPs allowed for dramatic enhancement of cell longevity that was concurrent with macrophage stimulation after 2 weeks in ex vivo culture. While equivalent NP internalization resulted in suppressed caspase activity across the NP series, macrophage activation was correlated with increasing thiol content, leading to increased lysosomal activity and a robust pro-survival phenotype. Our results provide insight on tuning NP physiochemical properties as design handles for maximizing ex vivo macrophage longevity, which has implications for improving macrophage-based immune assays, biomanufacturing, and cell therapies.

Surface Engineered PLGA Nanoparticle for Threshold Responsive Glucose Monitoring and "Self-Programmed" Insulin Delivery

We have developed a reversible, biocompatible, "self-programmed" PLGA [poly(lactic-co-glycolic acid)] nanoparticle-based optical biosensor capable of sensing and continuous monitoring of glucose above the physiologically relevant threshold value (100-125 mg/dL) as well as "on-demand" insulin delivery via an "On-Off" technique. We have carefully surface engineered the PLGA nanoparticle using amino dextran-fluorescein (A-DexFl) and amino-phenyl boronic acid (A-PBA) to exploit the binding affinity of boronic acids with that of cis-1,2 diols of dextran/glucose. Initially, the dextran chains wrap the nanoparticle surface due to its high affinity toward A-PBA (K_b = 6.1 × 10⁶ M^-1). The close proximity of the fluorophores with that of A-PBA quenches the fluorescence, resulting in an "Off" state. On the addition of glucose, it competes with A-DexFl to bind with A-PBA. Above a certain threshold concentration of glucose, the binding affinity overcomes (K_b = 6.3 × 10⁷ M^-1) the dextran-A-PBA binding. This opens-up the wrapped A-DexFl chains from the nanoparticle surface and results in an increased distance between the fluorophore and A-PBA, triggering the "On" state. The activation of the On-Off state can be finely tuned in the desired range of physiologically relevant glucose concentrations by varying the ligand ratios on the PLGA surface. The nanoparticle core has also been used as an insulin reservoir to trigger the drug release in the "On" state. We have obtained ∼53% encapsulation efficiency and ∼20% loading efficiency for insulin loading. Once the glucose concentration falls beyond the detection range, the dextran chains collapse on the nanoparticle surface with a suspension in drug release. The process is solely controlled by the competition and multivalent binding affinity between glucose, A-DexFl, and A-PBA, which allows it to be "self-programmed" and "self-regulated" with continuous monitoring up to 8-10 cycles over a 72 h time period. A sustained drug release has been found with ∼70% of released drug over a period of 72 h, although this release is insignificant in the absence of glucose. Several control experiments have been performed to optimize the sensor design.

The role of a drug-loaded poly (lactic co-glycolic acid) (PLGA) copolymer stent in the treatment of ovarian cancer

Objectives: Cisplatin (CDDP) is a widely used and effective basic chemotherapeutic drug for the treatment of a variety of tumors, including ovarian cancer. However, adverse side effects and acquired drug resistance are observed in the clinical application of CDDP. Identifying a mode of administration that can alleviate side effects and reduce drug resistance has become a promising strategy to solve this problem.

Methods: In this study, 3D printing technology was used to prepare a CDDP-poly (lactic-co-glycolic acid) (CDDP-PLGA) polymer compound stent, and its physicochemical properties and cytotoxicity were evaluated both in vitro and in vivo.

Results: The CDDP-PLGA stent had a significant effect on cell proliferation and apoptosis and clearly decreased the size of subcutaneous tumors in nude mice, whereas the systemic side effects were mild compared with those of intraperitoneal CDDP injection. Compared with the control group, CDDP-PLGA significantly increased the mRNA and protein levels of p-glycoprotein (P < 0.01; P < 0.01) and decreased vascular endothelial growth factor mRNA (P < 0.05) and protein levels (P < 0.01), however, CDDP-PLGA significantly decreased the mRNA and protein levels of p-glycoprotein (P < 0.01; P < 0.01) and vascular endothelial growth factor (P < 0.01; P < 0.01), which are associated with chemoresistance, in subcutaneous tumor tissue. Immunohistochemistry assay results revealed that, in the CDDP-PLGA group, the staining of the proliferation-related genes Ki67 and PCNA were lightly, and the apoptosis-related gene caspase-3 stained deeply.

Conclusions: PLGA biomaterials loaded with CDDP, as compared with the same amount of free CDDP, showed good efficacy in terms of cytotoxicity, as evidenced by changes in apoptosis. Continuous local CDDP release can decrease the systemic side effects of this drug and the occurrence of drug resistance and angiogenesis, and improve the therapeutic effect. This new approach may be an effective strategy for the local treatment of epithelial ovarian cancer.

Polysaccharides as Stabilizers for Polymeric Microcarriers Fabrication

Biodegradable polymeric microparticles are widely used in drug delivery systems with prolonged-release profiles and/or cell microcarriers. Their fabrication via the oil/water emulsion solvent evaporation technique has normally required emulsifiers in the aqueous phase. The present work aims to evaluate the effectiveness of various polysaccharides, such as chitosan, hyaluronic acid, cellulose, arabinogalactan, guar and their derivatives, as an alternative to synthetic surfactants for polylactide microparticle stabilization during their fabrication. Targeted modification of the biopolymer’s chemical structure was also tested as a tool to enhance polysaccharides’ emulsifying ability. The transformation of biomacromolecules into a form of nanoparticle via bottom-up or top-down methods and their subsequent application for microparticle fabrication via the Pickering emulsion solvent evaporation technique was useful as a one-step approach towards the preparation of core/shell microparticles. The effect of polysaccharides’ chemical structure and the form of their application on the polylactide microparticles’ total yield, size distribution and morphology was evaluated. The application of polysaccharides has great potential in terms of the development of green chemistry and the biocompatibility of the formed microparticles, which is especially important in biomedicine application.

Astaxanthin Delivery Systems for Skin Application: A Review

Astaxanthin (AST) is a biomolecule known for its powerful antioxidant effect, which is considered of great importance in biochemical research and has great potential for application in cosmetics, as well as food products that are beneficial to human health and medicines. Unfortunately, its poor solubility in water, chemical instability, and low oral bioavailability make its applications in the cosmetic and pharmaceutical field a major challenge for the development of new products. To favor the search for alternatives to enhance and make possible the use of AST in formulations, this article aimed to review the scientific data on its application in delivery systems. The search was made in databases without time restriction, using keywords such as astaxanthin, delivery systems, skin, cosmetic, topical, and dermal. All delivery systems found, such as liposomes, particulate systems, inclusion complexes, emulsions, and films, presented peculiar advantages able to enhance AST properties, among which are stability, antioxidant potential, biological activities, and drug release. This survey showed that further studies are needed for the industrial development of new AST-containing cosmetics and topical formulations.

A nanotechnological approach in the current therapy of COVID-19: model drug oseltamivir-phosphate loaded PLGA nanoparticles targeted with spike protein binder peptide of SARS-CoV-2

Coronavirus disease 2019 (COVID-19) is today's most serious epidemic disease threatening the human race. The initial therapeutic approach of SARS-CoV-2 disease is based upon the binding the receptor-binding site of the spike protein to the host cell's ACE-2 receptor on the plasma membrane. In this study, it is aimed to develop a biocompatible and biodegradable polymeric drug delivery system that is targeted to the relevant receptor binding site and provides controlled drug release. Oseltamivir phosphate (OP) is an orally administered antiviral prodrug for primary therapy of the disease in biochemically activated carboxylate form (oseltamivir carboxylate OC). In the presented study, model drug OP loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) targeted with spike-binding peptide 1 (SBP1) of SARS-CoV-2 were designed to be used as an efficient and prolonged released antiviral drug delivery system. RY, EE, and DL values of the OP-loaded NPs produced by the solvent evaporation method were calculated to be 59.3%, 61.4%, and 26.9%, respectively. The particle size of OP-loaded NPs and OP-loaded NPs targeted with SBP1 peptide were 162.0 ± 11.0 and 226.9 ± 21.4 nm, respectively. While the zeta potential of the produced OP-loaded NPs was achieved negatively -23.9 ± 1.21 mV), the result of the modification with SBP1 peptide this value approached zero as -4.59 ± 0.728 mV. Morphological features of the OP-loaded NPs were evaluated using FEG-SEM. The further characterization and surface modification of the NPs were analyzed by FT-IR.In-vitrorelease studies of NPs showed that sustained release of OP occurred for two months that fitting the Higuchi kinetic model. By evaluating these outputs, it was reported that surface modification of OP-loaded NPs was significantly effective on characteristics such as size, zeta potential values, surface functionality, and release behavior. The therapeutic model drug-loaded polymeric formulation targeted with a specific peptide may serve as an alternative to more effective and controlled release pharmaceuticals in the treatment of COVID-19 upon an extensive investigation.

Materials Based on Chitosan and Polylactide: From Biodegradable Plastics to Tissue Engineering Constructions

Abstract

The transition to green chemistry and biodegradable polymers is a logical stage in the development of modern chemical science and technology. In the framework of this review, the advantages, disadvantages, and potential of biodegradable polymers of synthetic and natural origin are compared using the example of polylactide and chitosan as traditional representatives of these classes of polymers, and the possibilities of their combination via obtaining composite materials or copolymers are assessed. The mechanochemical approach to the synthesis of graft copolymers of chitosan with oligolactides/polylactides is considered in more detail.

Oral delivery of natural active small molecules by polymeric nanoparticles for the treatment of inflammatory bowel diseases

The incidence of inflammatory bowel disease (IBD) is rapidly rising throughout the world. Although tremendous efforts have been made, limited therapeutics are available for IBD management. Natural active small molecules (NASMs), which are a gift of nature to humanity, have been widely used in the prevention and alleviation of IBD; they have numerous advantageous features, including excellent biocompatibility, pharmacological activity, and mass production potential. Oral route is the most common and acceptable approach for drug administration, but the clinical application of NASMs in IBD treatment via oral route has been seriously restricted by their inherent limitations such as high hydrophobicity, instability, and poor bioavailability. With the development of nanotechnology, polymeric nanoparticles (NPs) have provided a promising platform that can efficiently encapsulate versatile NASMs, overcome multiple drug delivery barriers, and orally deliver the loaded NASMs to targeted tissues or cells while enhancing their stability and bioavailability. Thus, NPs can enhance the preventive and therapeutic effects of NASMs against IBD. Herein, we summarize the recent knowledge about polymeric matrix-based carriers, targeting ligands for drug delivery, and NASMs. We also discuss the current challenges and future developmental directions.

Chrono modulated multiple unit particulate systems (MUPS) via a continuous hot melt double extrusion technique: Investigation of the formulation and process suitability

The current study is aimed at the development of chrono modulated multiple unit particulate systems (MUPS) of nifedipine (ND) by a continuous double extrusion process. ND, a poorly soluble drug was formulated into an amorphous solid dispersion (ASD) to improve its solubility. Further, the ASD was converted into MUPS to control the drug release through a combination of pulsatile and sustained release portions. In the preparation of the ASD, the polymer HPMCAS LG was employed at different concentrations. MUPS were formulated by using Eudragit® FS100, Eudragit® RSPO, Klucel™ HF and lipids Precirol® ATO 5, Geleol™, Compritol® ATO5. The differential scanning calorimetry and powder X-ray diffraction studies of MUPS revealed the amorphous nature of ND. Scanning electron microscopy (SEM) studies depicted the surface morphology of the ASD and the gradual change in the surface of the coated MUPS during in-vitro release studies. The in-vitro drug release profiles of ASD indicated significant improvement (p < 0.05) of solubility of ND and MUPS demonstrated a combination of pulsatile and zero-order controlled release up to 12 h. Accelerated stability studies for MUPS at 40 °C/75% RH revealed the formulations were stable. These findings suggest hot melt double extrusion as a potential alternative for conventional techniques to produce MUPS.

Local delivery to malignant brain tumors: potential biomaterial-based therapeutic/adjuvant strategies

Glioblastoma (GBM) is the most aggressive malignant brain tumor and is associated with a very poor prognosis. The standard treatment for newly diagnosed patients involves total tumor surgical resection (if possible), plus irradiation and adjuvant chemotherapy. Despite treatment, the prognosis is still poor, and the tumor often recurs within two centimeters of the original tumor. A promising approach to improving the efficacy of GBM therapeutics is to utilize biomaterials to deliver them locally at the tumor site. Local delivery to GBM offers several advantages over systemic administration, such as bypassing the blood-brain barrier and increasing the bioavailability of the therapeutic at the tumor site without causing systemic toxicity. Local delivery may also combat tumor recurrence by maintaining sufficient drug concentrations at and surrounding the original tumor area. Herein, we critically appraised the literature on local delivery systems based within the following categories: polymer-based implantable devices, polymeric injectable systems, and hydrogel drug delivery systems. We also discussed the negative effect of hypoxia on treatment strategies and how one might utilize local implantation of oxygen-generating biomaterials as an adjuvant to enhance current therapeutic strategies.

Engineered PLGA microspheres for extended release of brexpiprazole: in vitro and in vivo studies

OBJECTIVE

To develop poly(d,l-lactide-co-glycolide) (PLGA) microspheres to achieve controlled and sustained release of brexpiprazole in vivo.

METHODS

Brexpiprazole microspheres were prepared by oil-in-water emulsion-solvent evaporation method and evaluated for morphology, particle size, encapsulation efficiency, drug loading, conformation and compatibility of drug and polymer, in vitro release, and in vivo pharmacokinetics. By establishing the relationship between in vitro and in vivo release, it helps identify the appropriate in vitro release conditions to explore release profiles of brexpiprazole microspheres.

RESULTS

Porous PLGA microspheres with near spherical morphology were obtained displaying an average diameter of 20.43 ± 0.06 μm, a drug loading capacity of 27.24 ± 0.33% and an encapsulation efficiency of 81.87 ± 1.07%. Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), and differential scanning calorimetry (DSC) analysis showed that some drugs encapsulated in the microspheres remained in the amorphous state and some were in the crystalline state. Different release setups resulted in different release kinetics. The dialysis release setup displayed a cumulative release of about 65% within 60 days, while the sample-and-separate setup showed a cumulative release of about 77% within 35 days. Per pharmacokinetic studies in rats, a burst phase in the plasma concentration-time curve was observed after intramuscular injection in the first 2 h followed by a clear zero-order release phase. Overall, brexpiprazole achieved in vivo sustained release from PLGA microspheres for up to 40 days.

CONCLUSION

A PLGA microsphere loaded with brexpiprazole was successfully developed and demonstrated potential for extended-release of therapeutics for schizophrenia treatment.

Development of novel biopolymer-based nanoparticles loaded cream for potential treatment of topical fungal infections

OBJECTIVE

Biodegradable polymers are extensively used due to their efficient safety profiles. The aim of the current study was to fabricate, evaluate, and characterize biodegradable, biocompatible fluconazole (FLZ) loaded chitosan (CHS) chondroitin sulfate (CS) nanoparticles (NPs) for topical delivery. Polymers utilized in the formulation not only served as a carrier system but also aided in fighting with complex etiology of the disease due to their innate antifungal activities.

METHODS

NPs were prepared by the complex coacervation method, then were optimized for various parameters and subsequently loaded into a cream.

RESULTS

Scanning electron microscopic (SEM) analysis showed spherical morphology of the NPs. Prepared NPs showed an average particle size in the range of 350-450 nm and an encapsulation efficiency (EE) of 86%. The polydispersity index (PDI) was found to be 0.148 that showed a uniform distribution of NPs. Fourier transform infrared (FTIR) spectroscopy confirmed the absence of any electrostatic interaction between ingredients. In vitro drug release analyses exhibited a sustained release of the drug and higher antifungal activity than free FLZ. Ex vivo permeability and drug distribution in different skin layers ensured a site-specific delivery of the FLZ-NPs. As compared with free FLZ and other control groups, the prepared NPs also exhibited significantly higher antifungal activity against Candida albicans (p < .01).

CONCLUSION

It was concluded from the results that the FLZ-NPs laden cream could be a potential candidate for topical and site-specific delivery of the drug cargo for the potential treatment of fungal infections.

PLGA-CS-PEG Microparticles for Controlled Drug Delivery in the Treatment of Triple Negative Breast Cancer Cells

In this study, we explore the development of controlled PLGA-CS-PEG microspheres, which are used to encapsulate model anticancer drugs (prodigiosin (PGS) or paclitaxel (PTX)) for controlled breast cancer treatment. The PLGA microspheres are blended with hydrophilic polymers (chitosan and polyethylene glycol) in the presence of polyvinyl alcohol (PVA) that were synthesized via a water-oil-water (W/O/W) solvent evaporation technique. Chitosan (CS) and polyethylene glycol (PEG) were used as surface-modifying additives to improve the biocompatibility and reduce the adsorption of plasma proteins onto the microsphere surfaces. These PLGA-CS-PEG microspheres are loaded with varying concentrations (5 and 8 mg/mL) of PGS or PTX, respectively. Scanning electron microscopy (SEM) revealed the morphological properties while Fourier transform infrared spectroscopy (FTIR) was used to elucidate the functional groups of drug-loaded PLGA-CS-PEG microparticles. A thirty-day, in vitro, encapsulated drug (PGS or PTX) release was carried out at 37 °C, which corresponds to human body temperature, and at 41 °C and 44 °C, which correspond to hyperthermic temperatures. The thermodynamics and kinetics of in vitro drug release were also elucidated using a combination of mathematical models and the experimental results. The exponents of the Korsmeyer–Peppas model showed that the kinetics of drug release was well characterized by anomalous non-Fickian drug release. Endothermic and nonspontaneous processes are also associated with the thermodynamics of drug release. Finally, the controlled in vitro release of cancer drugs (PGS and PTX) is shown to decrease the viability of MDA-MB-231 cells. The implications of the results are discussed for the development of drug-encapsulated PLGA-CS-PEG microparticles for the controlled release of cancer drugs in treatment of triple negative breast cancer.

Bulky Barbiturates as Non-Toxic Ionic Dye Insulators for Enhanced Emission in Polymeric Nanoparticles

Bulky hydrophobic counterions (weakly coordinating anions) can insulate ionic dyes against aggregation-caused quenching (ACQ) and enable preparation of highly fluorescent dye-loaded nanoparticles (NPs) for bioimaging, biosensing and light harvesting. Here, we introduce a family of hydrophobic anions based on fluorinated C-acyl barbiturates with delocalized negative charge and bulky non-polar groups. Similarly to fluorinated tetraphenylborates, these barbiturates prevent ACQ of cationic dye alkyl rhodamine B inside polymer NPs made of biodegradable poly(lactic-co-glycolic acid) (PLGA). Their efficiency to prevent ACQ increases for analogues with higher acidity and bulkiness. Their structure controls dye-dye communication, yielding bright NPs with on/off switching or stable emission. They enhance dye encapsulation inside NPs, allowing intracellular imaging without dye leakage. Compared to fluorinated tetraphenylborates known as cytotoxic transmembrane ion transporters, the barbiturates display a significantly lower cytotoxicity. These chemically available and versatile barbiturate derivatives are promising counterion scaffolds for preparation of bright non-toxic fluorescent nanomaterials.