World population in a grid of spherical quadrilaterals

Spatially explicit downscaling and projection of population in mainland China

Spatially explicit population data is critical to investigating human-nature interactions, identifying at-risk populations, and informing sustainable management and policy decisions. Most long-term global population data have three main limitations: 1) they were estimated with simple scaling or trend extrapolation methods which are not able to capture detailed population variation spatially and temporally; 2) the rate of urbanization and the spatial patterns of settlement changes were not fully considered; and 3) the spatial resolution is generally coarse. To address these limitations, we proposed a framework for large-scale spatially explicit downscaling of populations from census data and projecting future population distributions under different Shared Socio-economic Pathways (SSP) scenarios with the consideration of distinctive changes in urban extent. We downscaled urban and rural population separately and considered urban spatial sprawl in downscaling and projection. Treating urban and rural populations as distinct but interconnected entities, we constructed a random forest model to downscale historical populations and designed a gravity-based population potential model to project future population changes at the grid level. This work built a new capacity for understanding spatially explicit demographic change with a combination of temporal, spatial, and SSP scenario dimensions, paving the way for cross-disciplinary studies on long-term socio-environmental interactions.

A simulated 'sandbox' for exploring the modifiable areal unit problem in aggregation and disaggregation

We present a spatial testbed of simulated boundary data based on a set of very high-resolution census-based areal units surrounding Guadalajara, Mexico. From these input areal units, we simulated 10 levels of spatial resolutions, ranging from levels with 5,515-52,388 units and 100 simulated zonal configurations for each level - totalling 1,000 simulated sets of areal units. These data facilitate interrogating various realizations of the data and the effects of the spatial coarseness and zonal configurations, the Modifiable Areal Unit Problem (MAUP), on applications such as model training, model prediction, disaggregation, and aggregation processes. Further, these data can facilitate the production of spatially explicit, non-parametric estimates of confidence intervals via bootstrapping. We provide a pre-processed version of these 1,000 simulated sets of areal units, meta- and summary data to assist in their use, and a code notebook with the means to alter and/or reproduce these data.

Small area population denominators for improved disease surveillance and response

The Covid-19 pandemic has highlighted the value of strong surveillance systems in supporting our abilities to respond rapidly and effectively in mitigating the impacts of infectious diseases. A cornerstone of such systems is basic subnational scale data on populations and their demographics, which enable the scale of outbreaks to be assessed, risk to specific groups to be determined and appropriate interventions to be designed. Ongoing weaknesses and gaps in such data have however been highlighted by the pandemic. These can include outdated or inaccurate census data and a lack of administrative and registry systems to update numbers, particularly in low and middle income settings. Efforts to design and implement globally consistent geospatial modelling methods for the production of small area demographic data that can be flexibly integrated into health-focussed surveillance and information systems have been made, but these often remain based on outdated population data or uncertain projections. In recent years, efforts have been made to capitalise on advances in computing power, satellite imagery and new forms of digital data to construct methods for estimating small area population distributions across national and regional scales in the absence of full enumeration. These are starting to be used to complement more traditional data collection approaches, especially in the delivery of health interventions, but barriers remain to their widespread adoption and use in disease surveillance and response. Here an overview of these approaches is presented, together with discussion of future directions and needs.

A data set of distributed global population and water withdrawal from 1960 to 2020

Population and water withdrawal data sets are currently faced with difficulties in collecting, processing and verifying multi-source time series, and the spatial distribution characteristics of long series are also relatively lacking. Time series is the basic guarantee for the accuracy of data sets, and the production of long series spatial distribution is a realistic requirement to expand the application scope of data sets. Through the time-consuming and laborious basic processing work, this research focuses on the population and water intake time series, and interpolates and extends them to specific land uses to ensure the accuracy of the time series and the demand of spatially distributed data sets. This research provides a set of population density and water intensity products from 1960 to 2020 distributed to the administrative units or the corresponding regions. The data set fills the gaps in the multi-year data set for the accuracy of population density and the intensity of water withdrawal.

Measurement(s)	distributed global population and water withdrawal
Technology Type(s)	mathematical statistics and analysis

Fine-scale population spatialization data of China in 2018 based on real location-based big data

Accurate location-based big data has a high resolution and a direct interaction with human activities, allowing for fine-scale population spatial data to be realized. We take the average of Tencent user location big data as a measure of ambient population. The county-level statistical population data in 2018 was used as the assigned input data. The log linear spatially weighted regression model was used to establish the relationship between location data and statistical data to allocate the latter to a 0.01° grid, and the ambient population data of mainland China was obtained. Extracting street-level (lower than county-level) statistics for accuracy testing, we found that POP2018 has the best fit with the actual permanent population (R² = 0.91), and the error is the smallest (MSE_POP2018 = 22.48 <MSE_WorldPop = 37.24 <MSE_LandScan = 100.91). This research supplemented in the refined spatial distribution data of people between census years, as well as presenting the application technique of big data in ambient population estimation and zoning mapping.

Measurement(s)	population
Technology Type(s)	location-based big data
Factor Type(s)	spatial region
Sample Characteristic - Environment	spatial region
Sample Characteristic - Location	China

Projecting 1 km-grid population distributions from 2020 to 2100 globally under shared socioeconomic pathways

Spatially explicit population grid can play an important role in climate change, resource management, sustainable development and other fields. Several gridded datasets already exist, but global data, especially high-resolution data on future populations are largely lacking. Based on the WorldPop dataset, we present a global gridded population dataset covering 248 countries or areas at 30 arc-seconds (approximately 1 km) spatial resolution with 5-year intervals for the period 2020-2100 by implementing Random Forest (RF) algorithm. Our dataset is quantitatively consistent with the Shared Socioeconomic Pathways' (SSPs) national population. The spatially explicit population dataset we predicted in this research is validated by comparing it with the WorldPop dataset both at the sub-national and grid level. 3569 provinces (almost all provinces on the globe) and more than 480 thousand grids are taken into verification, and the results show that our dataset can serve as an input for predictive research in various fields.

Small area population denominators for improved disease surveillance and response

The Covid-19 pandemic has highlighted the value of strong surveillance systems in supporting our abilities to respond rapidly and effectively in mitigating the impacts of infectious diseases. A cornerstone of such systems is basic subnational scale data on populations and their demographics, which enable the scale of outbreaks to be assessed, risk to specific groups to be determined and appropriate interventions to be designed. Ongoing weaknesses and gaps in such data have however been highlighted by the pandemic. These can include outdated or inaccurate census data and a lack of administrative and registry systems to update numbers, particularly in low and middle income settings. Efforts to design and implement globally consistent geospatial modelling methods for the production of small area demographic data that can be flexibly integrated into health-focussed surveillance and information systems have been made, but these often remain based on outdated population data or uncertain projections. In recent years, efforts have been made to capitalise on advances in computing power, satellite imagery and new forms of digital data to construct methods for estimating small area population distributions across national and regional scales in the absence of full enumeration. These are starting to be used to complement more traditional data collection approaches, especially in the delivery of health interventions, but barriers remain to their widespread adoption and use in disease surveillance and response. Here an overview of these approaches is presented, together with discussion of future directions and needs.

A Population Spatialization Model at the Building Scale Using Random Forest

Population spatialization reveals the distribution and quantity of the population in geographic space with gridded population maps. Fine-scale population spatialization is essential for urbanization and disaster prevention. Previous approaches have used remotely sensed imagery to disaggregate census data, but this approach has limitations. For example, large-scale population censuses cannot be conducted in underdeveloped countries or regions, and remote sensing data lack semantic information indicating the different human activities occurring in a precise geographic location. Geospatial big data and machine learning provide new fine-scale population distribution mapping methods. In this paper, 30 features are extracted using easily accessible multisource geographic data. Then, a building-scale population estimation model is trained by a random forest (RF) regression algorithm. The results show that 91% of the buildings in Lin’an District have absolute error values of less than six compared with the actual population data. In a comparison with a multiple linear (ML) regression model, the mean absolute errors of the RF and ML models are 2.52 and 3.21, respectively, the root mean squared errors are 8.2 and 9.8, and the R2 values are 0.44 and 0.18. The RF model performs better at building-scale population estimation using easily accessible multisource geographic data. Future work will improve the model accuracy in densely populated areas.

Exploring the Relationship between the Spatial Distribution of Different Age Populations and Points of Interest (POI) in China

Population spatialization data is crucial to conducting scientific studies of coupled human–environment systems. Although significant progress has been made in population spatialization, the spatialization of different age populations is still weak. POI data with rich information have great potential to simulate the spatial distribution of different age populations, but the relationship between spatial distributions of POI and different age populations is still unclear, and whether it can be used as an auxiliary variable for the different age population spatialization remains to be explored. Therefore, this study collected and sorted out the number of different age populations and POIs in 2846 county-level administrative units of the Chinese mainland in 2010, divided the research data by region and city size, and explored the relationship between the different age populations and POIs. We found that there is a complex relationship between POI and different age populations. Firstly, there are positive, moderate-to-strong linear correlations between POI and population indicators. Secondly, POI has a different explanatory power for different age populations, and it has a higher explanatory power for the young and middle-aged population than the child and old population. Thirdly, the explanatory power of POI to different age populations is positively correlated with the urban economic development level. Finally, a small number of a certain kinds of POIs can be used to effectively simulate the spatial distributions of different age populations, which can improve the efficiency of obtaining spatialization data of different age populations and greatly save on costs. The study can provide data support for the precise spatialization of different age populations and inspire the spatialization of the other population attributes by POI in the future.

Gridded population mapping for Germany based on building density, height and type from Earth Observation data using census disaggregation and bottom-up estimates

Gridded population data is widely used to map fine scale population patterns and dynamics to understand associated human-environmental processes for global change research, disaster risk assessment and other domains. This study mapped gridded population across Germany using weighting layers from building density, building height (both from previous studies) and building type datasets, all created from freely available, temporally and globally consistent Copernicus Sentinel-1 and Sentinel-2 data. We first produced and validated a nation-wide dataset of predominant residential and non-residential building types. We then examined the impact of different weighting layers from density, type and height on top-down dasymetric mapping quality across scales. We finally performed a nation-wide bottom-up population estimate based on the three datasets. We found that integrating building types into dasymetric mapping is helpful at fine scale, as population is not redistributed to non-residential areas. Building density improved the overall quality of population estimates at all scales compared to using a binary building layer. Most importantly, we found that the combined use of density and height, i.e. volume, considerably increased mapping quality in general and with regard to regional discrepancy by largely eliminating systematic underestimation in dense agglomerations and overestimation in rural areas. We also found that building density, type and volume, together with living floor area per capita, are suitable to produce accurate large-area bottom-up population estimates.

Intraday Variation Mapping of Population Age Structure via Urban-Functional-Region-Based Scaling

The spatial distribution of the population is uneven for various reasons, such as urban-rural differences and geographical conditions differences. As the basic element of the natural structure of the population, the age structure composition of populations also varies considerably across the world. Obtaining accurate and spatiotemporal population age structure maps is crucial for calculating population size at risk, analyzing populations mobility patterns, or calculating health and development indicators. During the past decades, many population maps in the form of administrative units and grids have been produced. However, these population maps are limited by the lack of information on the change of population distribution within a day and the age structure of the population. Urban functional regions (UFRs) are closely related to population mobility patterns, which can provide information about population variation intraday. Focusing on the area within the Beijing Fifth Ring Road, the political and economic center of Beijing, we showed how to use the temporal scaling factors obtained by analyzing the population survey sampling data and population dasymetric maps in different categories of UFRs to realize the intraday variation mapping of elderly individuals and children. The population dasymetric maps were generated on the basis of covariates related to population. In this article, 50 covariates were calculated from remote sensing data and geospatial data. However, not all covariates are associate with population distribution. In order to improve the accuracy of dasymetric maps and reduce the cost of mapping, it is necessary to select the optimal subset for the dasymetric model of elderly and children. The random forest recursive feature elimination (RF-RFE) algorithm was introduced to obtain the optimal subset of different age groups of people and generate the population dasymetric model in this article, as well as to screen out the optimal subset with 38 covariates and 26 covariates for the dasymetric models of the elderly and children, respectively. An accurate UFR identification method combining point of interest (POI) data and OpenStreetMap (OSM) road network data is also introduced in this article. The overall accuracy of the identification results of UFRs was 70.97%, which is quite accurate. The intraday variation maps of population age structure on weekdays and weekends were made within the Beijing Fifth Ring Road. Accuracy evaluation based on sampling data found that the overall accuracy was relatively high—R2 for each time period was higher than 0.5 and root mean square error (RMSE) was less than 0.05. On weekdays in particular, R2 for each time period was higher than 0.61 and RMSE was less than 0.02.

Local Population Mapping Using a Random Forest Model Based on Remote and Social Sensing Data: A Case Study in Zhengzhou, China

High-resolution gridded population data are important for understanding and responding to many socioeconomic and environmental problems. Local estimates of the population allow officials and researchers to make a better local planning (e.g., optimizing public services and facilities). This study used a random forest algorithm, on the basis of remote sensing (i.e., satellite imagery) and social sensing data (i.e., point-of-interest and building footprint), to disaggregate census population data for the five municipal districts of Zhengzhou city, China, onto 100 × 100 m grid cells. We used a statistical tool to detect areas with an abnormal population density; e.g., areas containing many empty houses or houses rented by more people than allowed, and conducted field work to validate our findings. Results showed that some categories of points-of-interest, such as residential communities, parking lots, banks, and government buildings were the most important contributing elements in modeling the spatial distribution of the residential population in Zhengzhou City. The exclusion of areas with an abnormal population density from model training and dasymetric mapping increased the accuracy of population estimates in other areas with a more common population density. We compared our product with three widely used gridded population products: Worldpop, the Gridded Population of the World, and the 1-km Grid Population Dataset of China. The relative accuracy of our modeling approach was higher than that of those three products in the five municipal districts of Zhengzhou. This study demonstrated potential for the combination of remote and social sensing data to more accurately estimate the population density in urban areas, with minimum disturbance from the abnormal population density.

Predicting Near-Future Built-Settlement Expansion Using Relative Changes in Small Area Populations

Advances in the availability of multi-temporal, remote sensing-derived global built-/human-settlements datasets can now provide globally consistent definitions of “human-settlement” at unprecedented spatial fineness. Yet, these data only provide a time-series of past extents and urban growth/expansion models have not had parallel advances at high-spatial resolution. Here our goal was to present a globally applicable predictive modelling framework, as informed by a short, preceding time-series of built-settlement extents, capable of producing annual, near-future built-settlement extents. To do so, we integrated a random forest, dasymetric redistribution, and autoregressive temporal models with open and globally available subnational data, estimates of built-settlement population, and environmental covariates. Using this approach, we trained the model on a 11 year time-series (2000–2010) of European Space Agency (ESA) Climate Change Initiative (CCI) Land Cover “Urban Areas” class and predicted annual, 100m resolution, binary settlement extents five years beyond the last observations (2011–2015) within varying environmental, urban morphological, and data quality contexts. We found that our model framework performed consistently across all sampled countries and, when compared to time-specific imagery, demonstrated the capacity to capture human-settlement missed by the input time-series and the withheld validation settlement extents. When comparing manually delineated building footprints of small settlements to the modelled extents, we saw that the modelling framework had a 12 percent increase in accuracy compared to withheld validation settlement extents. However, how this framework performs when using different input definitions of “urban” or settlement remains unknown. While this model framework is predictive and not explanatory in nature, it shows that globally available “off-the-shelf” datasets and relative changes in subnational population can be sufficient for accurate prediction of future settlement expansion. Further, this framework shows promise for predicting near-future settlement extents and provides a foundation for forecasts further into the future.

Annually modelling built-settlements between remotely-sensed observations using relative changes in subnational populations and lights at night

Mapping urban features/human built-settlement extents at the annual time step has a wide variety of applications in demography, public health, sustainable development, and many other fields. Recently, while more multitemporal urban features/human built-settlement datasets have become available, issues still exist in remotely-sensed imagery due to spatial and temporal coverage, adverse atmospheric conditions, and expenses involved in producing such datasets. Remotely-sensed annual time-series of urban/built-settlement extents therefore do not yet exist and cover more than specific local areas or city-based regions. Moreover, while a few high-resolution global datasets of urban/built-settlement extents exist for key years, the observed date often deviates many years from the assigned one. These challenges make it difficult to increase temporal coverage while maintaining high fidelity in the spatial resolution. Here we describe an interpolative and flexible modelling framework for producing annual built-settlement extents. We use a combined technique of random forest and spatio-temporal dasymetric modelling with open source subnational data to produce annual 100 m × 100 m resolution binary built-settlement datasets in four test countries located in varying environmental and developmental contexts for test periods of five-year gaps. We find that in the majority of years, across all study areas, the model correctly identified between 85 and 99% of pixels that transition to built-settlement. Additionally, with few exceptions, the model substantially out performed a model that gave every pixel equal chance of transitioning to built-settlement in each year. This modelling framework shows strong promise for filling gaps in cross-sectional urban features/built-settlement datasets derived from remotely-sensed imagery, provides a base upon which to create urban future/built-settlement extent projections, and enables further exploration of the relationships between urban/built-settlement area and population dynamics.

Spatially Explicit Mapping of Historical Population Density with Random Forest Regression: A Case Study of Gansu Province, China, in 1820 and 2000

This study established a random forest regression model (RFRM) using terrain factors, climatic and river factors, distances to the capitals of provinces, prefectures (Fu, in Chinese Pinyin), and counties as independent variables to predict the population density. Then, using the RFRM, we explicitly reconstructed the spatial distribution of the population density of Gansu Province, China, in 1820 and 2000, at a resolution of 10 by 10 km. By comparing the explicit reconstruction with census data at the township level from 2000, we found that the RFRM-based approach mostly reproduced the spatial variability in the population density, with a determination coefficient (R2) of 0.82, a positive reduction of error (RE, 0.72) and a coefficient of efficiency (CE) of 0.65. The RFRM-based reconstructions show that the population of Gansu Province in 1820 was mostly distributed in the Lanzhou, Gongchang, Pingliang, Qinzhou, Qingyang, and Ningxia prefecture. The macro-spatial pattern of the population density in 2000 kept approximately similar with that in 1820. However, fine differences could be found. The 79.92% of the population growth of Gansu Province from 1820 to 2000 occurred in areas lower than 2500 m. As a result, the population weighting in the areas above 2500 m was ~9% in 1820 while it was greater than 14% in 2000. Moreover, in comparison to 1820, the population density intensified in Lanzhou, Xining, Yinchuan, Baiyin, Linxia, and Tianshui, while it weakened in Gongchang, Qingyang, Ganzhou, and Suzhou.

Improving the Accuracy of Fine-Grained Population Mapping Using Population-Sensitive POIs

Many methods have been used to generate gridded population maps by downscaling demographic data. As one of these methods, the accuracy of the dasymetric model depends heavily on the covariates. Point-of-interest (POI) data, as important covariates, have been widely used for population estimation. However, POIs are often used indiscriminately in existing studies. A few studies further used selected categories of POIs identified based only on the nonspatial quantitative relationship between the POIs and population. In this paper, the spatial association between the POIs and population distribution was considered to identify the POIs with a strong spatial correlation with the population distribution, i.e., population-sensitive POIs. The ability of population-sensitive POIs to improve the fine-grained population mapping accuracy was explored by comparing the results of random forest dasymetric models driven by population-sensitive POIs, all POIs, and no POIs, along with the same sets of multisource remote sensing and social sensing data. The results showed that the model driven by population-sensitive POI had the highest accuracy. Population-sensitive POIs were also more effective in improving the population mapping accuracy than were POIs selected based only on their quantitative relationship with the population. The model built using population-sensitive POIs also performed better than the two popular gridded population datasets WorldPop and LandScan. The model we proposed in this study can be used to generate accurate spatial population distribution information and contributes to achieving more reliable analyses of population-related social problems.

The Role of Open Access Data in Geospatial Electrification Planning and the Achievement of SDG7. An OnSSET-Based Case Study for Malawi

Achieving universal access to electricity is a development challenge many countries are currently battling with. The advancement of information technology has, among others, vastly improved the availability of geographic data and information. That, in turn, has had a considerable impact on tracking progress as well as better informing decision making in the field of electrification. This paper provides an overview of open access geospatial data and GIS based electrification models aiming to support SDG7, while discussing their role in answering difficult policy questions. Upon those, an updated version of the Open Source Spatial Electrification Toolkit (OnSSET-2018) is introduced and tested against the case study of Malawi. At a cost of $1.83 billion the baseline scenario indicates that off-grid PV is the least cost electrification option for 67.4% Malawians, while grid extension can connect about 32.6% of population in 2030. Sensitivity analysis however, indicates that the electricity demand projection determines significantly both the least cost technology mix and the investment required, with the latter ranging between $1.65–7.78 billion.

Improved population mapping for China using remotely sensed and points-of-interest data within a random forests model

Remote sensing image products (e.g. brightness of nighttime lights and land cover/land use types) have been widely used to disaggregate census data to produce gridded population maps for large geographic areas. The advent of the geospatial big data revolution has created additional opportunities to map population distributions at fine resolutions with high accuracy. A considerable proportion of the geospatial data contains semantic information that indicates different categories of human activities occurring at exact geographic locations. Such information is often lacking in remote sensing data. In addition, the remarkable progress in machine learning provides toolkits for demographers to model complex nonlinear correlations between population and heterogeneous geographic covariates. In this study, a typical type of geospatial big data, points-of-interest (POIs), was combined with multi-source remote sensing data in a random forests model to disaggregate the 2010 county-level census population data to 100 × 100 m grids. Compared with the WorldPop population dataset, our population map showed higher accuracy. The root mean square error for population estimates in Beijing, Shanghai, Guangzhou, and Chongqing for this method and WorldPop were 27,829 and 34,193, respectively. The large under-allocation of the population in urban areas and over-allocation in rural areas in the WorldPop dataset was greatly reduced in this new population map. Apart from revealing the effectiveness of POIs in improving population mapping, this study promises the potential of geospatial big data for mapping other socioeconomic parameters in the future.

Population Mapping with Multisensor Remote Sensing Images and Point-Of-Interest Data

Fine-resolution population distribution mapping is necessary for many purposes, which cannot be met by aggregated census data due to privacy. Many approaches utilize ancillary data that are related to population density, such as nighttime light imagery and land use, to redistribute the population from census to finer-scale units. However, most of the ancillary data used in the previous studies of population modeling are environmental data, which can only provide a limited capacity to aid population redistribution. Social sensing data with geographic information, such as point-of-interest (POI), are emerging as a new type of ancillary data for urban studies. This study, as a nascent attempt, combined POI and multisensor remote sensing data into new ancillary data to aid population redistribution from census to grid cells at a resolution of 250 m in Zhejiang, China. The accuracy of the results was assessed by comparing them with WorldPop. Results showed that our approach redistributed the population with fewer errors than WorldPop, especially at the extremes of population density. The approach developed in this study—incorporating POI with multisensor remotely sensed data in redistributing the population onto finer-scale spatial units—possessed considerable potential in the era of big data, where a substantial volume of social sensing data is increasingly being collected and becoming available.

Examining the correlates and drivers of human population distributions across low- and middle-income countries

Geographical factors have influenced the distributions and densities of global human population distributions for centuries. Climatic regimes have made some regions more habitable than others, harsh topography has discouraged human settlement, and transport links have encouraged population growth. A better understanding of these types of relationships enables both improved mapping of population distributions today and modelling of future scenarios. However, few comprehensive studies of the relationships between population spatial distributions and the range of drivers and correlates that exist have been undertaken at all, much less at high spatial resolutions, and particularly across the low- and middle-income countries. Here, we quantify the relative importance of multiple types of drivers and covariates in explaining observed population densities across 32 low- and middle-income countries over four continents using machine-learning approaches. We find that, while relationships between population densities and geographical factors show some variation between regions, they are generally remarkably consistent, pointing to universal drivers of human population distribution. Here, we find that a set of geographical features relating to the built environment, ecology and topography consistently explain the majority of variability in population distributions at fine spatial scales across the low- and middle-income regions of the world.

Spatially disaggregated population estimates in the absence of national population and housing census data

Population numbers at local levels are fundamental data for many applications, including the delivery and planning of services, election preparation, and response to disasters. In resource-poor settings, recent and reliable demographic data at subnational scales can often be lacking. National population and housing census data can be outdated, inaccurate, or missing key groups or areas, while registry data are generally lacking or incomplete. Moreover, at local scales accurate boundary data are often limited, and high rates of migration and urban growth make existing data quickly outdated. Here we review past and ongoing work aimed at producing spatially disaggregated local-scale population estimates, and discuss how new technologies are now enabling robust and cost-effective solutions. Recent advances in the availability of detailed satellite imagery, geopositioning tools for field surveys, statistical methods, and computational power are enabling the development and application of approaches that can estimate population distributions at fine spatial scales across entire countries in the absence of census data. We outline the potential of such approaches as well as their limitations, emphasizing the political and operational hurdles for acceptance and sustainable implementation of new approaches, and the continued importance of traditional sources of national statistical data.

Improving Large Area Population Mapping Using Geotweet Densities

Many different methods are used to disaggregate census data and predict population densities to construct finer scale, gridded population data sets. These methods often involve a range of high resolution geospatial covariate datasets on aspects such as urban areas, infrastructure, land cover and topography; such covariates, however, are not directly indicative of the presence of people. Here we tested the potential of geo-located tweets from the social media application, Twitter, as a covariate in the production of population maps. The density of geo-located tweets in 1x1 km grid cells over a 2-month period across Indonesia, a country with one of the highest Twitter usage rates in the world, was input as a covariate into a previously published random forests-based census disaggregation method. Comparison of internal measures of accuracy and external assessments between models built with and without the geotweets showed that increases in population mapping accuracy could be obtained using the geotweet densities as a covariate layer. The work highlights the potential for such social media-derived data in improving our understanding of population distributions and offers promise for more dynamic mapping with such data being continually produced and freely available.

High-resolution African population projections from radiative forcing and socio-economic models, 2000 to 2100

For its fifth assessment report, the Intergovernmental Panel on Climate Change divided future scenario projections (2005–2100) into two groups: Socio-Economic Pathways (SSPs) and Representative Concentration Pathways (RCPs). Each SSP has country-level urban and rural population projections, while the RCPs are based on radiative forcing caused by greenhouse gases, aerosols and associated land-use change. In order for these projections to be applicable in earth system models, SSP and RCP population projections must be at the same spatial scale. Thus, a gridded population dataset that takes into account both RCP-based urban fractions and SSP-based population projection is needed. To support this need, an annual (2000–2100) high resolution (approximately 1km at the equator) gridded population dataset conforming to both RCPs (urban land use) and SSPs (population) country level scenario data were created.

High-resolution gridded population datasets for Latin America and the Caribbean in 2010, 2015, and 2020

The Latin America and the Caribbean region is one of the most urbanized regions in the world, with a total population of around 630 million that is expected to increase by 25% by 2050. In this context, detailed and contemporary datasets accurately describing the distribution of residential population in the region are required for measuring the impacts of population growth, monitoring changes, supporting environmental and health applications, and planning interventions. To support these needs, an open access archive of high-resolution gridded population datasets was created through disaggregation of the most recent official population count data available for 28 countries located in the region. These datasets are described here along with the approach and methods used to create and validate them. For each country, population distribution datasets, having a resolution of 3 arc seconds (approximately 100 m at the equator), were produced for the population count year, as well as for 2010, 2015, and 2020. All these products are available both through the WorldPop Project website and the WorldPop Dataverse Repository.

Dynamic population mapping using mobile phone data

During the past few decades, technologies such as remote sensing, geographical information systems, and global positioning systems have transformed the way the distribution of human population is studied and modeled in space and time. However, the mapping of populations remains constrained by the logistics of censuses and surveys. Consequently, spatially detailed changes across scales of days, weeks, or months, or even year to year, are difficult to assess and limit the application of human population maps in situations in which timely information is required, such as disasters, conflicts, or epidemics. Mobile phones (MPs) now have an extremely high penetration rate across the globe, and analyzing the spatiotemporal distribution of MP calls geolocated to the tower level may overcome many limitations of census-based approaches, provided that the use of MP data is properly assessed and calibrated. Using datasets of more than 1 billion MP call records from Portugal and France, we show how spatially and temporarily explicit estimations of population densities can be produced at national scales, and how these estimates compare with outputs produced using alternative human population mapping methods. We also demonstrate how maps of human population changes can be produced over multiple timescales while preserving the anonymity of MP users. With similar data being collected every day by MP network providers across the world, the prospect of being able to map contemporary and changing human population distributions over relatively short intervals exists, paving the way for new applications and a near real-time understanding of patterns and processes in human geography.

Methods for estimating population density in data-limited areas: evaluating regression and tree-based models in Peru

Obtaining accurate small area estimates of population is essential for policy and health planning but is often difficult in countries with limited data. In lieu of available population data, small area estimate models draw information from previous time periods or from similar areas. This study focuses on model-based methods for estimating population when no direct samples are available in the area of interest. To explore the efficacy of tree-based models for estimating population density, we compare six different model structures including Random Forest and Bayesian Additive Regression Trees. Results demonstrate that without information from prior time periods, non-parametric tree-based models produced more accurate predictions than did conventional regression methods. Improving estimates of population density in non-sampled areas is important for regions with incomplete census data and has implications for economic, health and development policies.

High resolution population distribution maps for Southeast Asia in 2010 and 2015

Spatially accurate, contemporary data on human population distributions are vitally important to many applied and theoretical researchers. The Southeast Asia region has undergone rapid urbanization and population growth over the past decade, yet existing spatial population distribution datasets covering the region are based principally on population count data from censuses circa 2000, with often insufficient spatial resolution or input data to map settlements precisely. Here we outline approaches to construct a database of GIS-linked circa 2010 census data and methods used to construct fine-scale (∼100 meters spatial resolution) population distribution datasets for each country in the Southeast Asia region. Landsat-derived settlement maps and land cover information were combined with ancillary datasets on infrastructure to model population distributions for 2010 and 2015. These products were compared with those from two other methods used to construct commonly used global population datasets. Results indicate mapping accuracies are consistently higher when incorporating land cover and settlement information into the AsiaPop modelling process. Using existing data, it is possible to produce detailed, contemporary and easily updatable population distribution datasets for Southeast Asia. The 2010 and 2015 datasets produced are freely available as a product of the AsiaPop Project and can be downloaded from: www.asiapop.org.

Effects of anthropogenic disturbance and climate on patterns of bat fly parasitism

Environmental conditions, including anthropogenic disturbance, can significantly alter host and parasite communities. Yet, our current knowledge is based mainly on endoparasites, while ectoparasites remain little studied. We studied the indirect effects of anthropogenic disturbance (human population density) and climate (temperature, precipitation and elevation) on abundance of highly host-specific bat flies in four Neotropical bat species across 43 localities in Venezuela. We formulated a set of 11 a priori hypotheses that included a combination of the two effectors and host species. Statistically, each of these hypotheses was represented by a zero-inflated negative binomial mixture model, allowing us to control for excess zeros in the data. The best model was selected using Akaike's information criteria. Fly abundance was affected by anthropogenic disturbance in Artibeus planirostris, Carollia perspicillata and Pteronotus parnellii, but not Desmodus rotundus. Climate affected fly abundance in all bat species, suggesting mediation of these effects via the host or by direct effects on flies. We conclude that human disturbance may play a role in shaping bat-bat fly interactions. Different processes could determine fly abundance in the different bat species.

Large-scale spatial population databases in infectious disease research

Modelling studies on the spatial distribution and spread of infectious diseases are becoming increasingly detailed and sophisticated, with global risk mapping and epidemic modelling studies now popular. Yet, in deriving populations at risk of disease estimates, these spatial models must rely on existing global and regional datasets on population distribution, which are often based on outdated and coarse resolution data. Moreover, a variety of different methods have been used to model population distribution at large spatial scales. In this review we describe the main global gridded population datasets that are freely available for health researchers and compare their construction methods, and highlight the uncertainties inherent in these population datasets. We review their application in past studies on disease risk and dynamics, and discuss how the choice of dataset can affect results. Moreover, we highlight how the lack of contemporary, detailed and reliable data on human population distribution in low income countries is proving a barrier to obtaining accurate large-scale estimates of population at risk and constructing reliable models of disease spread, and suggest research directions required to further reduce these barriers.

Assessing the use of global land cover data for guiding large area population distribution modelling

Gridded population distribution data are finding increasing use in a wide range of fields, including resource allocation, disease burden estimation and climate change impact assessment. Land cover information can be used in combination with detailed settlement extents to redistribute aggregated census counts to improve the accuracy of national-scale gridded population data. In East Africa, such analyses have been done using regional land cover data, thus restricting application of the approach to this region. If gridded population data are to be improved across Africa, an alternative, consistent and comparable source of land cover data is required. Here these analyses were repeated for Kenya using four continent-wide land cover datasets combined with detailed settlement extents and accuracies were assessed against detailed census data. The aim was to identify the large area land cover dataset that, combined with detailed settlement extents, produce the most accurate population distribution data. The effectiveness of the population distribution modelling procedures in the absence of high resolution census data was evaluated, as was the extrapolation ability of population densities between different regions. Results showed that the use of the GlobCover dataset refined with detailed settlement extents provided significantly more accurate gridded population data compared to the use of refined AVHRR-derived, MODIS-derived and GLC2000 land cover datasets. This study supports the hypothesis that land cover information is important for improving population distribution model accuracies, particularly in countries where only coarse resolution census data are available. Obtaining high resolution census data must however remain the priority. With its higher spatial resolution and its more recent data acquisition, the GlobCover dataset was found as the most valuable resource to use in combination with detailed settlement extents for the production of gridded population datasets across large areas.

Global estimates of ambient fine particulate matter concentrations from satellite-based aerosol optical depth: development and application

BACKGROUND

Epidemiologic and health impact studies of fine particulate matter with diameter < 2.5 microm (PM2.5) are limited by the lack of monitoring data, especially in developing countries. Satellite observations offer valuable global information about PM2.5 concentrations.

OBJECTIVE

In this study, we developed a technique for estimating surface PM2.5 concentrations from satellite observations.

METHODS

We mapped global ground-level PM2.5 concentrations using total column aerosol optical depth (AOD) from the MODIS (Moderate Resolution Imaging Spectroradiometer) and MISR (Multiangle Imaging Spectroradiometer) satellite instruments and coincident aerosol vertical profiles from the GEOS-Chem global chemical transport model.

RESULTS

We determined that global estimates of long-term average (1 January 2001 to 31 December 2006) PM2.5 concentrations at approximately 10 km x 10 km resolution indicate a global population-weighted geometric mean PM2.5 concentration of 20 microg/m3. The World Health Organization Air Quality PM2.5 Interim Target-1 (35 microg/m3 annual average) is exceeded over central and eastern Asia for 38% and for 50% of the population, respectively. Annual mean PM2.5 concentrations exceed 80 microg/m3 over eastern China. Our evaluation of the satellite-derived estimate with ground-based in situ measurements indicates significant spatial agreement with North American measurements (r = 0.77; slope = 1.07; n = 1057) and with noncoincident measurements elsewhere (r = 0.83; slope = 0.86; n = 244). The 1 SD of uncertainty in the satellite-derived PM2.5 is 25%, which is inferred from the AOD retrieval and from aerosol vertical profile errors and sampling. The global population-weighted mean uncertainty is 6.7 microg/m3.

CONCLUSIONS

Satellite-derived total-column AOD, when combined with a chemical transport model, provides estimates of global long-term average PM2.5 concentrations.

Toward critical spatial thinking in the social sciences and humanities

The integration of geographically referenced information into the conceptual frameworks and applied uses of the social sciences and humanities has been an ongoing process over the past few centuries. It has gained momentum in recent decades with advances in technologies for computation and visualization and with the arrival of new data sources. This article begins with an overview of this transition, and argues that the spatial integration of information resources and the cross-disciplinary sharing of analysis and representation methodologies are important forces for the integration of scientific and artistic expression, and that they draw on core concepts in spatial (and spatio-temporal) thinking. We do not suggest that this is akin to prior concepts of unified knowledge systems, but we do maintain that the boundaries to knowledge transfer are disintegrating and that our abilities in problem solving for purposes of artistic expression and scientific development are enhanced through spatial perspectives. Moreover, approaches to education at all levels must recognize the need to impart proficiency in the critical and efficient application of these fundamental spatial concepts, if students and researchers are to make use of expanding access to a broadening range of spatialized information and data processing technologies.

Determining global population distribution: methods, applications and data

Evaluating the total numbers of people at risk from infectious disease in the world requires not just tabular population data, but data that are spatially explicit and global in extent at a moderate resolution. This review describes the basic methods for constructing estimates of global population distribution with attention to recent advances in improving both spatial and temporal resolution. To evaluate the optimal resolution for the study of disease, the native resolution of the data inputs as well as that of the resulting outputs are discussed. Assumptions used to produce different population data sets are also described, with their implications for the study of infectious disease. Lastly, the application of these population data sets in studies to assess disease distribution and health impacts is reviewed. The data described in this review are distributed in the accompanying DVD.

An Updating System for the Gridded Population Database of China Based on Remote Sensing, GIS and Spatial Database Technologies

The spatial distribution of population is closely related to land use and land cover (LULC) patterns on both regional and global scales. Population can be redistributed onto geo-referenced square grids according to this relation. In the past decades, various approaches to monitoring LULC using remote sensing and Geographic Information Systems (GIS) have been developed, which makes it possible for efficient updating of geo-referenced population data. A Spatial Population Updating System (SPUS) is developed for updating the gridded population database of China based on remote sensing, GIS and spatial database technologies, with a spatial resolution of 1 km by 1 km. The SPUS can process standard Moderate Resolution Imaging Spectroradiometer (MODIS L1B) data integrated with a Pattern Decomposition Method (PDM) and an LULC-Conversion Model to obtain patterns of land use and land cover, and provide input parameters for a Population Spatialization Model (PSM). The PSM embedded in SPUS is used for generating 1 km by 1 km gridded population data in each population distribution region based on natural and socio-economic variables. Validation results from finer township-level census data of Yishui County suggest that the gridded population database produced by the SPUS is reliable.

The spatial distribution of leprosy cases during 15 years of a leprosy control program in Bangladesh: an observational study

BACKGROUND

An uneven spatial distribution of leprosy can be caused by the influence of geography on the distribution of risk factors over the area, or by population characteristics that are heterogeneously distributed over the area. We studied the distribution of leprosy cases detected by a control program to identify spatial and spatio-temporal patterns of occurrence and to search for environmental risk factors for leprosy.

METHODS

The houses of 11,060 leprosy cases registered in the control area during a 15-year period (1989-2003) were traced back, added to a geographic database (GIS), and plotted on digital maps. We looked for clusters of cases in space and time. Furthermore, relationships with the proximity to geographic features, such as town center, roads, rivers, and clinics, were studied.

RESULTS

Several spatio-temporal clusters were observed for voluntarily reported cases. The cases within and outside clusters did not differ in age at detection, percentage with multibacillary leprosy, or sex ratio. There was no indication of the spread from one point to other parts of the district, indicating a spatially stable endemic situation during the study period. The overall risk of leprosy in the district was not associated with roads, rivers, and leprosy clinics. The risk was highest within 1 kilometer of town centers and decreased with distance from town centers.

CONCLUSION

The association of a risk of leprosy with the proximity to towns indicates that rural towns may play an important role in the epidemiology of leprosy in this district. Further research on the role of towns, particularly in rural areas, is warranted.

Release of hydrogen sulfide by asteroid impacts in Black Sea and risks for inland human population

The hydrogen sulfide rich waters of the Black Sea pose a potential danger for the surrounding land regions. The impact of an asteroid may cause a catastrophic poisonous gas release in the atmosphere. Some effects of this last phenomenon on the Eastern Black Sea coastal regions are evaluated in this article. Two simple models are proposed to describe the generation of the H(2)S cloud. The initial diameter of the cloud depends on asteroid size. The initial thickness of the cloud depends, in addition, on sea depth at impact location. The wind speed plays an important role in H(2)S cloud dynamics. At 10 m/s wind-speed the cloud margins may be seen at about 150 km from impact location in about 3.2 h. The maximum distance traveled by the hydrogen sulfide cloud increases by increasing the asteroid size and wind speed. The influence of the impact position on the distance traveled by hydrogen sulfide clouds is rather weak, as far as the seawater depth does not change significantly. Two values are considered when referring to the effect of hydrogen sulfide concentrations on humans: the lower concentration limit of 19.88 ppm (which corresponds to fatigue, loss of appetite, headache, irritability, poor memory, dizziness) and the upper concentration limit of 497 ppm (which corresponds to death after single exposures). The land surface area covered by the H(2)S cloud generated by a 1000 m size asteroid during the run-in ranges between about 6080 and 11,520 km(2). This may affect between 145,000 and 276,000 people. When a 250 m size asteroid is considered, the covered land surface area ranges between about 840 and 1,890 km(2) and between 20,000 and 45,000 people may be affected. In case of a 70 m size asteroid, the cloud covers up to 105 km(2) of land during the run-in. This may affect about 2500 people. These are moderate estimates. They do not include the urban population and may be 10 times underestimated for some particular wind directions. General recommendations to diminish the social effects of the impacts are presented.

The accuracy of human population maps for public health application

OBJECTIVES

Human population totals are used for generating burden of disease estimates at global, continental and national scales to help guide priority setting in international health financing. These exercises should be aware of the accuracy of the demographic information used.

METHODS

The analysis presented in this paper tests the accuracy of five large-area, public-domain human population distribution data maps against high spatial resolution population census data enumerated in Kenya in 1999. We illustrate the epidemiological significance, by assessing the impact of using these different human population surfaces in determining populations at risk of various levels of climate suitability for malaria transmission. We also describe how areal weighting, pycnophylactic interpolation and accessibility potential interpolation techniques can be used to generate novel human population distribution surfaces from local census information and evaluate to what accuracy this can be achieved.

RESULTS

We demonstrate which human population distribution surface performed best and which population interpolation techniques generated the most accurate bespoke distributions. Despite various levels of modelling complexity, the accuracy achieved by the different surfaces was primarily determined by the spatial resolution of the input population data. The simplest technique of areal weighting performed best.

CONCLUSIONS

Differences in estimates of populations at risk of malaria in Kenya of over 1 million persons can be generated by the choice of surface, highlighting the importance of these considerations in deriving per capita health metrics in public health. Despite focussing on Kenya the results of these analyses have general application and are discussed in this wider context.