Chitin microneedles for an easy-to-use tuberculosis skin test

An update on biomaterials as microneedle matrixes for biomedical applications

Microneedles (MNs) have been developed for various applications such as drug delivery, cosmetics, diagnosis, and biosensing. To meet the requirements of MNs used in these areas, numerous materials have been used for the fabrication of MNs. However, MNs will be exposed to skin tissues after piercing the stratum corneum barrier. Thus, it is necessary to ensure that the matrix materials of MNs have the characteristics of low toxicity, good biocompatibility, biodegradability, and sufficient mechanical properties for clinical application. In this review, the matrix materials currently used for preparing MNs are summarized and reviewed in terms of these factors. In addition, MN products used on the market and their applications are summarized in the end. This work may provide some basic information to researchers in the selection of MN matrix materials and in developing new materials.

Novel Pharmaceutical Strategies for Enhancing Skin Penetration of Biomacromolecules

Skin delivery of biomacromolecules holds great advantages in the systemic and local treatment of multiple diseases. However, the densely packed stratum corneum and the tight junctions between keratinocytes stand as formidable skin barriers against the penetration of most drug molecules. The large molecular weight, high hydrophilicity, and lability nature of biomacromolecules pose further challenges to their skin penetration. Recently, novel penetration enhancers, nano vesicles, and microneedles have emerged as efficient strategies to deliver biomacromolecules deep into the skin to exert their therapeutic action. This paper reviews the potential application and mechanisms of novel skin delivery strategies with emphasis on the pharmaceutical formulations.

Dissolvable polymer microneedles for drug delivery and diagnostics

Dissolvable transdermal microneedles (μND) are promising micro-devices used to transport a wide selection of active compounds into the skin. To provide an effective therapeutic outcome, μNDs must pierce the human stratum corneum (~10 to 20 μm), without rupturing or bending during penetration, then release their cargo at the predetermined area and time. The ability of dissolvable μND arrays/patches to sufficiently pierce the skin is a crucial requirement, which depends on the material composition, μND geometry and fabrication techniques. This comprehensive review not only provides contemporary knowledge on the μND design approaches, but also the materials science facilitating these delivery systems and the opportunities these advanced materials can provide to enhance clinical outcomes.

Recent Advancements in Microneedle Technology for Multifaceted Biomedical Applications

Microneedle (MNs) technology is a recent advancement in biomedical science across the globe. The current limitations of drug delivery, like poor absorption, low bioavailability, inadequate skin permeation, and poor biodistribution, can be overcome by MN-based drug delivery. Nanotechnology made significant changes in fabrication techniques for microneedles (MNs) and design shifted from conventional to novel, using various types of natural and synthetic materials and their combinations. Nowadays, MNs technology has gained popularity worldwide in biomedical research and drug delivery technology due to its multifaceted and broad-spectrum applications. This review broadly discusses MN's types, fabrication methods, composition, characterization, applications, recent advancements, and global intellectual scenarios.

Polymeric microneedle-mediated sustained release systems: Design strategies and promising applications for drug delivery

Parenteral sustained release drug formulations, acting as preferable platforms for long-term exposure therapy, have been wildly used in clinical practice. However, most of these delivery systems must be given by hypodermic injection. Therefore, issues including needle-phobic, needle-stick injuries and inappropriate reuse of needles would hamper the further applications of these delivery platforms. Microneedles (MNs) as a potential alternative system for hypodermic needles can benefit from minimally invasive and self-administration. Recently, polymeric microneedle-mediated sustained release systems (MN@SRS) have opened up a new way for treatment of many diseases. Here, we reviewed the recent researches in MN@SRS for transdermal delivery, and summed up its typical design strategies and applications in various diseases therapy, particularly focusing on the applications in contraception, infection, cancer, diabetes, and subcutaneous disease. An overview of the present clinical translation difficulties and future outlook of MN@SRS was also provided.

Early Application of Quaternized Chitin Derivatives Inhibits Hypertrophic Scar Formation

Various treatments for hypertrophic scars (HS) are applied after wound re-epithelialization. However, the lack of early intervention within the wound bed leads to poor HS treatment outcomes. In this study, quaternized chitin (QC) derivatives with different degrees of deacetylation (7.4% and 78.9%) are synthesized and their effects on HS formation are evaluated in a rabbit ear scar model. Early application of QC alleviates scar hypertrophy without delayed wound healing. Fibroblast count, collagen content, and α-smooth muscle actin expression are decreased, while matrix metalloproteinase-1 is upregulated on day 35 in the QC treatment group. QC suppresses inflammatory cell infiltration and IL-6 expression. A subsequent reduction in transforming growth factor β1 expression is also observed. The inhibitory effect of QC on HS formation is eliminated through the administration of exogenous IL-6. Taken together, early application of QC inhibits HS formation by downregulating IL-6 expression, and QC with a low degree of deacetylation tends to be more effective. Considering its potential for accelerating wound healing, inhibiting HS formation, and its antibacterial activity, QC may be used as an effective dressing in clinical wound management.

A systematic review of carbohydrate-based microneedles: current status and future prospects

Microneedles (MNs) are minimally invasive tridimensional biomedical devices that bypass the skin barrier resulting in systemic and localized pharmacological effects. Historically, biomaterials such as carbohydrates, due to their physicochemical properties, have been used widely to fabricate MNs. Owing to their broad spectrum of functional groups, carbohydrates permit designing and engineering with tunable properties and functionalities. This has led the carbohydrate-based microarrays possessing the great potential to take a futuristic step in detecting, drug delivery, and retorting to biologicals. In this review, the crucial and extensive summary of carbohydrates such as hyaluronic acid, chitin, chitosan, chondroitin sulfate, cellulose, and starch has been discussed systematically, using PRISMA guidelines. It also discusses different approaches for drug delivery and the mechanical properties of biomaterial-based MNs, till date, progress has been achieved in clinical translation of carbohydrate-based MNs, and regulatory requirements for their commercialization. In conclusion, it describes a brief perspective on the future prospects of carbohydrate-based MNs referred to as the new class of topical drug delivery systems.

Marine polymeric microneedles for transdermal drug delivery

Transdermal drug delivery is considered one of the most attractive routes for administration of pharmaceutic and cosmetic active ingredients due to the numerous advantages, especially over oral and intravenous methodologies. However, some limitations still exist mainly regarding the need to improve the drugs permeation across the skin. For this, several strategies have been described, considering the application of chemical permeation enhancers, drugs' nanoformulations and physical methods. Of these, microneedles have been proposed in the last years as promising strategies to enhance transdermal drug delivery. In this review, different types of microneedles are described, and the most commonly used methods of fabrication systematized, as well as the materials typically used and their main therapeutical applications. A special attention is paid to polymeric microneedles, particularly those made from sustainable marine polysaccharides like chitosan, alginate and hyaluronic acid. The applications of marine based polymeric microneedle devices for transdermal drug delivery are examined in detail and the perspectives of translation from the clinical trials to the market demonstrated.

Microneedles Drug Delivery Systems for Treatment of Cancer: A Recent Update

Microneedles (MNs) are tiny needle like structures used in drug delivery through layers of the skin. They are non-invasive and are associated with significantly less or no pain at the site of administration to the skin. MNs are excellent in delivering both small and large molecules to the subjects in need thereof. There exist several strategies for drug delivery using MNs, wherein each strategy has its pros and cons. Research in this domain lead to product development and commercialization for clinical use. Additionally, several MN-based products are undergoing clinical trials to evaluate its safety, efficacy, and tolerability. The present review begins by providing bird's-eye view about the general characteristics of MNs followed by providing recent updates in the treatment of cancer using MNs. Particularly, we provide an overview of various aspects namely: anti-cancerous MNs that work based on sensor technology, MNs for treatment of breast cancer, skin carcinoma, prostate cancer, and MNs fabricated by additive manufacturing or 3 dimensional printing for treatment of cancer. Further, the review also provides limitations, safety concerns, and latest updates about the clinical trials on MNs for the treatment of cancer. Furthermore, we also provide a regulatory overview from the "United States Food and Drug Administration" about MNs.

Tailored Poly(vinylidene fluoride-co-trifluoroethylene) Crystal Orientation for a Triboelectric Nanogenerator through Epitaxial Growth on a Chitin Nanofiber Film

Tailoring the crystal orientation of poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) has attracted widespread interest because of its effects on the ferroelectric properties required for various electronic devices. In this study, we investigated the epitaxial growth of PVDF-TrFE on a chitin film for developing triboelectric nanogenerators (TENGs). The crystallographic match between the chitin and PVDF-TrFE enables the development of the intended crystal orientation, with the PVDF-TrFE polarization axis aligned perpendicular to the substrate. In addition, the epitaxially grown PVDF-TrFE on chitin not only enhances the performance of the TENG but also increases the stability of the hygroscopic chitin film against water. The corresponding TENG exhibits a significantly higher output current compared to that of a nonepitaxial PVDF-TrFE/chitin film. Furthermore, the triboelectric sensors based on epitaxial PVDF-TrFE/chitin films allow the monitoring of subtle pressures, suggesting that tailoring the crystal orientation of PVDF-TrFE is a promising approach for developing high-performance TENGs.

A compendium of current developments on polysaccharide and protein-based microneedles

Microneedles (MNs), i.e. minimally invasive three-dimensional microstructures that penetrate the stratum corneum inducing relatively little or no pain, have been studied as appealing therapeutic vehicles for transdermal drug delivery. Over the last years, the fabrication of MNs using biopolymers, such as polysaccharides and proteins, has sparked the imagination of scientists due to their recognized biocompatibility, biodegradability, ease of fabrication and sustainable character. Owing to their wide range of functional groups, polysaccharides and proteins enable the design and preparation of materials with tunable properties and functionalities. Therefore, these biopolymer-based MNs take a revolutionary step offering great potential not only in drug administration, but also in sensing and response to physiological stimuli. In this review, a critical and comprehensive overview of the polysaccharides and proteins employed in the design and engineering of MNs will be given. The strategies adopted for their preparation, their advantages and disadvantages will be also detailed. In addition, the potential and challenges of using these matrices to deliver drugs, vaccines and other molecules will be discussed. Finally, this appraisal ends with a perspective on the possibilities and challenges in research and development of polysaccharide and protein MNs, envisioning the future advances and clinical translation of these platforms as the next generation of drug delivery systems.

Silk fibroin hydrogels for potential applications in photodynamic therapy

In this study, we prepared translucid hydrogels with different concentrations of silk fibroin, extracted from raw silk fibers, and used them as a matrix to incorporate the photosensitizer 5-(4-aminophenyl)-10,15,20-tris-(4-sulphonatophenyl) porphyrin trisodium for application in photodynamic therapy (PDT). The hydrogels obtained were characterized by rheology, spectrophotometry, and scattering techniques to elucidate the factors involved in the formation of the hydrogel, and to characterize the behavior of silk fibroin (SF) after incorporating of the porphyrin to the matrix. The rheology results demonstrated that the SF hydrogels had a shear thinning behavior. In addition, we were able to verify that the structure of the material was able to be recovered over time after shear deformation. The encapsulation of porphyrins in hydrogels leads to the formation of self-assembled peptide nanostructures that prevent porphyrin aggregation, thereby greatly increasing the generation of singlet oxygen. Also, our findings suggest that porphyrin can diffuse out of the hydrogel and permeate the outer skin layers. This evidence suggests that SF hydrogels could be used as porphyrin encapsulation and as a drug carrier for the sustained release of photosensitizers for PDT.

Advances in the Design of Transdermal Microneedles for Diagnostic and Monitoring Applications

Due to their intrinsic advantages over classical hypodermic needles, microneedles have received much attention over the last two decades and will likely soon appear in clinics. Although the vast majority of research is focused on designing microneedles for the painless delivery of drugs, their applications for diagnostic purposes have also provided promising results. In this paper, the main advances in the field of microneedles for diagnostic and patient monitoring purposes are introduced and critically discussed.

Polymeric microneedles for transdermal protein delivery

The intrinsic properties of therapeutic proteins generally present a major impediment for transdermal delivery, including their relatively large molecule size and susceptibility to degradation. One solution is to utilize microneedles (MNs), which are capable of painlessly traversing the stratum corneum and directly translocating protein drugs into the systematic circulation. MNs can be designed to incorporate appropriate structural materials as well as therapeutics or formulations with tailored physicochemical properties. This platform technique has been applied to deliver drugs both locally and systemically in applications ranging from vaccination to diabetes and cancer therapy. This review surveys the current design and use of polymeric MNs for transdermal protein delivery. The clinical potential and future translation of MNs are also discussed.

Bioinspired Transparent Laminated Composite Film for Flexible Green Optoelectronics

Herein, we report a new version of a bioinspired chitin nanofiber (ChNF) transparent laminated composite film (HCLaminate) made of siloxane hybrid materials (hybrimers) reinforced with ChNFs, which mimics the nanofiber-matrix structure of hierarchical biocomposites. Our HCLaminate is produced via vacuum bag compressing and subsequent UV-curing of the matrix resin-impregnated ChNF transparent paper (ChNF paper). It is worthwhile to note that this new type of ChNF-based transparent substrate film retains the strengths of the original ChNF paper and compensates for ChNF paper's drawbacks as a flexible transparent substrate. As a result, compared with high-performance synthetic plastic films, such as poly(ethylene terephthalate), poly(ether sulfone), poly(ethylene naphthalate), and polyimide, our HCLaminate is characterized to exhibit extremely smooth surface topography, outstanding optical clarity, high elastic modulus, high dimensional stability, etc. To prove our HCLaminate as a substrate film, we use it to fabricate flexible perovskite solar cells and a touch-screen panel. As far as we know, this work is the first to demonstrate flexible optoelectronics, such as flexible perovskite solar cells and a touch-screen panel, actually fabricated on a composite film made of ChNF. Given its desirable macroscopic properties, we envision our HCLaminate being utilized as a transparent substrate film for flexible green optoelectronics.

Hierarchical Chitin Fibers with Aligned Nanofibrillar Architectures: A Nonwoven-Mat Separator for Lithium Metal Batteries

Here, we introduce regenerated fibers of chitin (Chiber), the second most abundant biopolymer after cellulose, and propose its utility as a nonwoven fiber separator for lithium metal batteries (LMBs) that exhibits an excellent electrolyte-uptaking capability and Li-dendrite-mitigating performance. Chiber is produced by a centrifugal jet-spinning technique, which allows a simple and fast production of Chibers consisting of hierarchically aligned self-assembled chitin nanofibers. Following the scrutinization on the Chiber-Li-ion interaction via computational methods, we demonstrate the potential of Chiber as a nonwoven mat-type separator by monitoring it in Li-O₂ and Na-O₂ cells.

Recent advances in the design of polymeric microneedles for transdermal drug delivery and biosensing

Microneedles are an efficient and minimally invasive approach to transdermal drug delivery and extraction of skin interstitial fluid. Compared to solid microneedles made of silicon, metals and ceramics, polymeric microneedles have attracted extensive attention due to their excellent biocompatibility, biodegradability and nontoxicity. They are easy to fabricate in large scale and can load drugs in high amounts. More importantly, polymers with different degradation profiles, swelling properties, and responses to biological/physical stimuli can be employed to fabricate polymeric microneedles with different mechanical properties and performance. This review provides a guideline for the selection of polymers and the corresponding fabrication methods for polymeric microneedles while summarizing their recent application in drug delivery and fluid extraction. It should be noted that although polymeric microneedles can achieve efficient transdermal delivery of drugs, their wide applications were limited by their unsatisfactory transdermal therapeutic efficiency. Delivery of nanomedicines that incorporate drugs into functional nanoparticles/capsules can address this problem and thus may be an interesting direction in the future.

New insights and perspectives into biological materials for flexible electronics

Materials based on biological materials are becoming increasingly competitive and are likely to be critical components in flexible electronic devices.

Engineering strategies for chitin nanofibers

Chitin nanofibers are the fundamental building blocks of numerous structural natural materials. From top-down to bottom-up, here we review engineering strategies to produce chitin nanofibers for engineered materials and their applications.

Chitin Nanofiber Transparent Paper for Flexible Green Electronics

A transparent paper made of chitin nanofibers (ChNF) is introduced and its utilization as a substrate for flexible organic light-emitting diodes is demonstrated. Given its promising macroscopic properties, biofriendly characteristics, and availability of the raw material, the utilization of the ChNF transparent paper as a structural platform for flexible green electronics is envisaged.

Improved immunogenicity of individual influenza vaccine components delivered with a novel dissolving microneedle patch stable at room temperature

Prevention of seasonal influenza epidemics and pandemics relies on widespread vaccination coverage to induce protective immunity. In addition to a good antigenic match with the circulating viruses, the effectiveness of individual strains represented in the trivalent vaccines depends on their immunogenicity. In this study, we evaluated the immunogenicity of H1N1, H3N2, and B seasonal influenza virus vaccine strains delivered individually with a novel dissolving microneedle patch and the stability of this formulation during storage at 25 °C. Our data demonstrate that all strains retained their antigenic activity after incorporation in the dissolving patches as measured by single radial diffusion (SRID) assay and immune responses to vaccination in BALB/c mice. After a single immunization, all three antigens delivered with microneedle patches induced superior neutralizing antibody titers compared to intramuscular immunization. Cutaneous antigen delivery was especially beneficial for the less immunogenic B strain. Mice immunized with dissolving microneedle patches encapsulating influenza A/Brisbane/59/07 (H1N1) vaccine were fully protected against lethal challenge by homologous mouse-adapted influenza virus. All vaccine components retained activity during storage at room temperature for at least 3 months as measured in vitro by SRID assay and in vivo by mouse immunization studies. Our data demonstrate that dissolving microneedle patches are a promising advance for influenza cutaneous vaccination due to improved immune responses using less immunogenic influenza antigens and enhanced stability.

Ultrastrong and Flexible Hybrid Hydrogels based on Solution Self-Assembly of Chitin Nanofibers in Gelatin Methacryloyl (GelMA)

We demonstrate ultrastrong and flexible hydrogels by self-assembling chitin nanofiber in the presence of gelatin methacryloyl. We tune the mechanical properties of the hydrogel with chitin nanofiber content and show proof-of-concept applications in engineering vascular tissue.

Production and electrical characterization of the reflectin A2 isoform from Doryteuthis (Loligo) pealeii

​We report an improved methodology for the production of cephalopod proteins known as reflectins. Our findings may afford new opportunities for the study of these proteins’ multifaceted materials properties.

Squid beak inspired water processable chitosan composites with tunable mechanical properties

By modulating the degree of cross-linking, this lightweight composite can be tuned with a range of mechanical properties.

Sample-free quantification of blood biomarkers via laser-treated skin

Surface modified microneedle (MN) arrays are being developed to capture circulating biomarkers from the skin, but inefficiency and unreliability of the current method limit its clinical applications. We describe here that illumination of a tiny area of the skin with hemoglobin-preferably absorbent laser increased the amount of circulating biomarkers in the upper dermis by more than 1000-fold. The hemoglobin-specific light altered the permeability of capillaries leading to extravasation of molecules but not blood cells beneath the skin involved. When specific probe-coated MN arrays were applied into the laser-treated skin, the biomarkers accumulated in the upper dermis were reliably, accurately, and sufficiently captured as early as 15 min of the assay. The maximal binding occurred in 1 h in a manner independent of penetration depth or a molecular mass of the biomarker. With anti-fluorescein isothiocyanate (FITC)-MNs, we were able to measure blood concentrations of FITC in mice receiving FITC intravenously. The sensitivity and accuracy were comparable to those attained by fluorescence spectrophotometer. Likewise, MNs containing influenza hemagglutinin (HA) could detect anti-HA antibody in mice or swine receiving influenza vaccines as effectively as standard immunoassays. The novel, minimally invasive approach holds great promise for measurement of multiple biomarkers by a single array for point-of-care diagnosis.

Smart microneedle coatings for controlled delivery and biomedical analysis

The work presented demonstrates an unconventional approach in the preparation of smart microneedle (MN) coatings utilising electrohydrodynamic atomisation (EHDA) principles. Stainless steel (600-900 µm in height) MNs were coupled to a ground electrode (in the EHDA coating set-up) with the deposition distance and collecting methodology varied for an ethanol:methanol (50:50) vehicle system. The preparation of nano- and micrometre-scaled pharmaceutical coatings was achieved. Fluorescein dye (serving as potential drug, sensory materials or disease state markers) and polyvinylpyrrolidone (PVP, polymer matrix system) formed the remaining components of the coating formulation. Based on these excipients and by varying the coating process, particles (100 nm to 3 µm) and fibres (400 nm to 1 µm) were deposited directly on MNs in controlled and selectable fashion (flow rates variable ∼ 5-50 µL/min, applied voltage variable 6-19 kV). These demonstrated options for multiple targeting and analysis applications. The underlying EHDA process permits room temperature fabrication, controlled output and scale-up potential for emerging MN devices as drug systems or lab-chip testing devices.