Osteogenic/angiogenic dual growth factor delivery microcapsules for regeneration of vascularized bone tissue

Therapeutic Potential of Nano-Sustained-Release Factors for Bone Scaffolds

Research on nano-sustained-release factors for bone tissue scaffolds has significantly promoted the precision and efficiency of bone-defect repair by integrating biomaterials science, nanotechnology, and regenerative medicine. Current research focuses on developing multifunctional scaffold materials and intelligent controlled-release systems to optimize the spatiotemporal release characteristics of growth factors, drugs, and genes. Nano slow-release bone scaffolds integrate nano slow-release factors, which are loaded with growth factors, drugs, genes, etc., with bone scaffolds, which can significantly improve the efficiency of bone repair. In addition, these drug-loading systems have also been extended to the fields of anti-infection and anti-tumor. However, the problem of heterotopic ossification caused by high doses has led to a shift in research towards a low-dose multi-factor synergistic strategy. Multiple Phase II clinical trials are currently ongoing, evaluating the efficacy and safety of nano-hydroxyapatite scaffolds. Despite significant progress, this field still faces a series of challenges: the immunity risks of the long-term retention of nanomaterials, the precise matching of multi-factor release kinetics, and the limitations of the large-scale production of personalized scaffolds. Future development directions in this area include the development of responsive sustained-release systems, biomimetic sequential release design, the more precise regeneration of injury sites through a combination of gene-editing technology and self-assembled nanomaterials, and precise drug loading and sustained release through microfluidic and bioprinting technologies to reduce the manufacturing cost of bone scaffolds. The progress of these bone scaffolds has gradually changed bone repair from morphology-matched filling regeneration to functional recovery, making the clinical transformation of bone scaffolds safer and more universal.

Advances in growth factor-containing 3D printed scaffolds in orthopedics

Currently, bone tissue engineering is a research hotspot in the treatment of orthopedic diseases, and many problems in orthopedics can be solved through bone tissue engineering, which can be used to treat fractures, bone defects, arthritis, etc. More importantly, it can provide an alternative to traditional bone grafting and solve the problems of insufficient autologous bone grafting, poor histocompatibility of grafts, and insufficient induced bone regeneration. Growth factors are key factors in bone tissue engineering by promoting osteoblast proliferation and differentiation, which in turn increases the efficiency of osteogenesis and bone regeneration. 3D printing technology can provide carriers with better pore structure for growth factors to improve the stability of growth factors and precisely control their release. Studies have shown that 3D-printed scaffolds containing growth factors provide a better choice for personalized treatment, bone defect repair, and bone regeneration in orthopedics, which are important for the treatment of orthopedic diseases and have potential research value in orthopedic applications. This paper aims to summarize the research progress of 3D printed scaffolds containing growth factors in orthopedics in recent years and summarize the use of different growth factors in 3D scaffolds, including bone morphogenetic proteins, platelet-derived growth factors, transforming growth factors, vascular endothelial growth factors, etc. Optimization of material selection and the way of combining growth factors with scaffolds are also discussed.

ZIF-8-modified hydrogel sequentially delivers angiogenic and osteogenic growth factors to accelerate vascularized bone regeneration

To realize high-quality vascularized bone regeneration, we developed a multifunctional hydrogel (SHPP-ZB) by incorporating BMP-2@ZIF-8/PEG-NH2 nanoparticles (NPs) into a sodium alginate/hydroxyapatite/polyvinyl alcohol hydrogel loaded with PDGF-BB, allowing for the sequential release of angiogenic and osteogenic growth factors (GFs) during bone repair. ZIF-8 served as a protective host for BMP-2 from degradation, ensuring high encapsulation efficiency and long-term bioactivity. The SHPP-ZB hydrogel exhibited enhanced mechanical strength and injectability, making it suitable for complex bone defects. It provided a swelling interface for tissue interlocking and the early release of Zn2+ and tannin acid (TA) to exert antioxidant and antibacterial effects, followed by the sequential release of angiogenic and osteogenic GFs to promote high-quality vascularized bone regeneration. In vitro experiments demonstrated the superior angiogenic and osteogenic properties of SHPP-ZB compared to other groups. In vivo experiments indicated that the sequential delivery of GFs via SHPP-ZB hydrogel could improve vascularized bone regeneration. Further, RNA sequencing analysis of regenerative bone tissue revealed that SHPP-ZB hydrogel promoted vascularized bone regeneration by regulating JUN, MAPK, Wnt, and calcium signaling pathways in vivo. This study presented a promising approach for efficient vascularized bone regeneration in large-scale bone defects.

Rapid fabrication of biomimetic PLGA microsphere incorporated with natural porcine dermal aECM for bone regeneration

Bioactive microspheres coated with acellular extracellular matrix (aECM) have received extensive attention in bone tissue engineering. In this work, biomimetic microspheres with different aECM ratios, uniform size and controllable size were prepared easily by blending natural porcine dermal aECM and poly (lactic-co-glycolic acid) (PLGA) using electrohydrodynamic spraying and solidification actuated by solvent extraction method. In this work, the appropriate polymer concentration and preparation voltage were investigated, and the surface morphology of the microspheres was observed by scanning electron microscope. Sirius red was used to visualize aECM exposure on the surface of the microspheres. The in vitro and in vivo experiments were carried out to evaluate the bioactivity and osteogenic properties of the microspheres. The results showed that the morphology and size of PLGA microspheres had little influence on the aECM blending. In vitro experiments showed that the higher the content of aECM, the better the cell adhesion performance. In vivo, rat calvarial defect models were observed and characterized at 4 and 8 weeks postoperatively, and the values of BV/TV of 50aECM/PLGA were 47.57 ± 1.14% and 72.92 ± 2.19%, respectively. The results showed that the skull healing effect was better in aECM-containing microspheres. In conclusion, aECM/PLGA composite microspheres can increase cell adhesion performance through the addition of aECM. Moreover, in vivo experiments have proved that aECM/PLGA microspheres are beneficial to bone repair, which means the aECM/PLGA microspheres are a promising bone tissue engineering material.

Biomaterials-mediated radiation-induced diseases treatment and radiation protection

In recent years, the intersection of the academic and medical domains has increasingly spotlighted the utilization of biomaterials in radioactive disease treatment and radiation protection. Biomaterials, distinguished from conventional molecular pharmaceuticals, offer a suite of advantages in addressing radiological conditions. These include their superior biological activity, chemical stability, exceptional histocompatibility, and targeted delivery capabilities. This review comprehensively delineates the therapeutic mechanisms employed by various biomaterials in treating radiological afflictions impacting the skin, lungs, gastrointestinal tract, and hematopoietic systems. Significantly, these nanomaterials function not only as efficient drug delivery vehicles but also as protective agents against radiation, mitigating its detrimental effects on the human body. Notably, the strategic amalgamation of specific biomaterials with particular pharmacological agents can lead to a synergistic therapeutic outcome, opening new avenues in the treatment of radiation- induced diseases. However, despite their broad potential applications, the biosafety and clinical efficacy of these biomaterials still require in-depth research and investigation. Ultimately, this review aims to not only bridge the current knowledge gaps in the application of biomaterials for radiation-induced diseases but also to inspire future innovations and research directions in this rapidly evolving field.

Spatial Growth Factor Delivery for 3D Bioprinting of Vascularized Bone with Adipose-Derived Stem/Stromal Cells as a Single Cell Source

Encapsulating multiple growth factors within a scaffold enhances the regenerative capacity of engineered bone grafts through their localization and controls the spatiotemporal release profile. In this study, we bioprinted hybrid bone grafts with an inherent built-in controlled growth factor delivery system, which would contribute to vascularized bone formation using a single stem cell source, human adipose-derived stem/stromal cells (ASCs) in vitro. The strategy was to provide precise control over the ASC-derived osteogenesis and angiogenesis at certain regions of the graft through the activity of spatially positioned microencapsulated BMP-2 and VEGF within the osteogenic and angiogenic bioink during bioprinting. The 3D-bioprinted vascularized bone grafts were cultured in a perfusion bioreactor. Results proved localized expression of osteopontin and CD31 by the ASCs, which was made possible through the localized delivery activity of the built-in delivery system. In conclusion, this approach provided a methodology for generating off-the-shelf constructs for vascularized bone regeneration and has the potential to enable single-step, in situ bioprinting procedures for creating vascularized bone implants when applied to bone defects.

A 3D-Printed Assemblable Bespoke Scaffold as a Versatile Microcryogel Carrier for Site-Specific Regenerative Medicine

Advances in additive manufacturing have led to diverse patient-specific implant designs utilizing computed tomography, but this requires intensive work and financial implications. Here, Digital Light Processing is used to fabricate a hive-structured assemblable bespoke scaffold (HIVE). HIVE can be manually assembled in any shape/size with ease, so a surgeon can create a scaffold that will best fit a defect before implantation. Simultaneously, it can have site-specific treatments by working as a carrier filled with microcryogels (MC) incorporating different biological factors in different pockets of HIVE. After characterization, possible site-specific applications are investigated by utilizing HIVE as a versatile carrier with incorporated treatments such as growth factors (GF), bioceramic, or cells. HIVE as a GF-carrier shows a controlled release of bone morphogenetic protein/vascular endothelial growth factor (BMP/VEGF) and induced osteogenesis/angiogenesis from human mesenchymal stem cells (hMSC)/human umbilical vein endothelial cells (HUVECs). Furthermore, as a bioceramic-carrier, HIVE demonstrates enhanced mineralization and osteogenesis, and as a HUVEC carrier, it upregulates both osteogenic and angiogenic gene expression of hMSCs. HIVE with different combinations of MCs yields a distinct local effect and successful cell migration is confirmed within assembled HIVEs. Finally, an in vivo rat subcutaneous implantation demonstrates site-specific osteogenesis and angiogenesis.

Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems

Novel tissue regeneration strategies are constantly being developed worldwide. Research on bone regeneration is noteworthy, as many promising new approaches have been documented with novel strategies currently under investigation. Innovative biomaterials that allow the coordinated and well-controlled repair of bone fractures and bone loss are being designed to reduce the need for autologous or allogeneic bone grafts eventually. The current engineering technologies permit the construction of synthetic, complex, biomimetic biomaterials with properties nearly as good as those of natural bone with good biocompatibility. To ensure that all these requirements meet, bioactive molecules are coupled to structural scaffolding constituents to form a final product with the desired physical, chemical, and biological properties. Bioactive molecules that have been used to promote bone regeneration include protein growth factors, peptides, amino acids, hormones, lipids, and flavonoids. Various strategies have been adapted to investigate the coupling of bioactive molecules with scaffolding materials to sustain activity and allow controlled release. The current manuscript is a thorough survey of the strategies that have been exploited for the delivery of biomolecules for bone regeneration purposes, from choosing the bioactive molecule to selecting the optimal strategy to synthesize the scaffold and assessing the advantages and disadvantages of various delivery strategies.

Bone Morphogenic Protein and Mesenchymal Stem Cells to Regenerate Bone in Calvarial Defects: A Systematic Review

BACKGROUND

The use of bone morphogenic protein and mesenchymal stem cells has shown promise in promoting bone regeneration in calvarial defects. However, a systematic review of the available literature is needed to evaluate the efficacy of this approach.

METHODS

We comprehensively searched electronic databases using MeSH terms related to skull defects, bone marrow mesenchymal stem cells, and bone morphogenic proteins. Eligible studies included animal studies that used BMP therapy and mesenchymal stem cells to promote bone regeneration in calvarial defects. Reviews, conference articles, book chapters, and non-English language studies were excluded. Two independent investigators conducted the search and data extraction.

RESULTS

Twenty-three studies published between 2010 and 2022 met our inclusion criteria after a full-text review of the forty-five records found in the search. Eight of the 23 studies used mice as models, while 15 used rats. The most common mesenchymal stem cell was bone marrow-derived, followed by adipose-derived. BMP-2 was the most popular. Stem cells were embedded in Scaffold (13), Transduction (7), and Transfection (3), and they were delivered BMP to cells. Each treatment used 2 × 10⁴-1 × 10⁷ mesenchymal stem cells, averaging 2.26 × 10⁶. Most BMP-transduced MSC studies used lentivirus.

CONCLUSIONS

This systematic review examined BMP and MSC synergy in biomaterial scaffolds or alone. BMP therapy and mesenchymal stem cells in calvarial defects, alone, or with a scaffold regenerated bone. This method treats skull defects in clinical trials. The best scaffold material, therapeutic dosage, administration method, and long-term side effects need further study.

Strategies for in situ tissue engineering of vascularized bone regeneration (Review)

Numerous physiological processes occur following bone fracture, including inflammatory cell recruitment, vascularization, and callus formation and remodeling. In particular circumstances, such as critical bone defects or osteonecrosis, the regenerative microenvironment is compromised, rendering endogenous stem/progenitor cells incapable of fully manifesting their reparative potential. Consequently, external interventions, such as grafting or augmentation, are frequently necessary. In situ bone tissue engineering (iBTE) employs cell-free scaffolds that possess microenvironmental cues, which, upon implantation, redirect the behavior of endogenous stem/progenitor cells towards a pro-regenerative inflammatory response and reestablish angiogenesis-osteogenesis coupling. This process ultimately results in vascularized bone regeneration (VBR). In this context, a comprehensive review of the current techniques and modalities in VBR-targeted iBTE technology is provided.

Strontium Ion-Functionalized Nano-Hydroxyapatite/Chitosan Composite Microspheres Promote Osteogenesis and Angiogenesis for Bone Regeneration

Critical-size bone defects are an important problem in clinical practice, which usually occurs in severe trauma, or tumor resection, and cannot heal completely and autonomously. Implantation of grafts is often required to promote the regeneration of critical-size bone defects. Metal ions play an important role in human health, as they affect the body's metabolism and the tissue function. Strontium ions (Sr²⁺) can promote osteogenesis and angiogenesis. Herein, we prepared nano-hydroxyapatite (nHA)/chitosan (CS) composite microspheres with a uniform particle size distribution and an extracellular matrix-like nanofiber structure using microfluidic technology and direct alkali-induced gelation. Strontium ions were stably added into the microspheres by using polydopamine (PDA) to chelate metal ions forming a bone repair material (nHA/CS@PDA-Sr) with good bioactivity. The coordination reaction of PDA can effectively control the release of strontium ions and avoid the negative effects caused by the high strontium concentration. Our in vitro experiments showed that the composite microspheres had good biocompatibility and that the PDA coating promotes cell adhesion. The slow release of strontium ions can effectively promote mesenchymal stem cells osteogenic differentiation and the vascularization of endothelial cells. In addition, we injected composite microspheres into cranial defects of rats to evaluate osseointegration in vivo. The results showed that nHA/CS@PDA-Sr could effectively promote bone regeneration in the defect area. This study demonstrates that composite microspheres stimulate bone repair providing a promising way for bone-defect regeneration.

Engineering of an Osteoinductive and Growth Factor-Free Injectable Bone-Like Microgel for Bone Regeneration

Bone autografts remain the gold standard for bone grafting surgeries despite having increased donor site morbidity and limited availability. Bone morphogenetic protein-loaded grafts represent another successful commercial alternative. However, the therapeutic use of recombinant growth factors has been associated with significant adverse clinical outcomes. This highlights the need to develop biomaterials that closely approximate the structure and composition of bone autografts, which are inherently osteoinductive and biologically active with embedded living cells, without the need for added supplements. Here, injectable growth factor-free bone-like tissue constructs are developed, that closely approximate the cellular, structural, and chemical composition of bone autografts. It is demonstrated that these micro-constructs are inherently osteogenic, and demonstrate the ability to stimulate mineralized tissue formation and regenerate bone in critical-sized defects in-vivo. Furthermore, the mechanisms that allow human mesenchymal stem cells (hMSCs) to be highly osteogenic in these constructs, despite the lack of osteoinductive supplements, are assessed, whereby Yes activated protein (YAP) nuclear localization and adenosine signaling appear to regulate osteogenic cell differentiation. The findings represent a step toward a new class of minimally invasive, injectable, and inherently osteoinductive scaffolds, which are regenerative by virtue of their ability to mimic the tissue cellular and extracellular microenvironment, thus showing promise for clinical applications in regenerative engineering.

The Delivery and Activation of Growth Factors Using Nanomaterials for Bone Repair

Bone regeneration is a comprehensive process that involves different stages, and various growth factors (GFs) play crucial roles in the entire process. GFs are currently widely used in clinical settings to promote bone repair; however, the direct application of GFs is often limited by their fast degradation and short local residual time. Additionally, GFs are expensive, and their use may carry risks of ectopic osteogenesis and potential tumor formation. Nanomaterials have recently shown great promise in delivering GFs for bone regeneration, as they can protect fragile GFs and control their release. Moreover, functional nanomaterials can directly activate endogenous GFs, modulating the regeneration process. This review provides a summary of the latest advances in using nanomaterials to deliver exogenous GFs and activate endogenous GFs to promote bone regeneration. We also discuss the potential for synergistic applications of nanomaterials and GFs in bone regeneration, along with the challenges and future directions that need to be addressed.

Radiological and Histological Analyses of Nonrigid Versus Rigid Fixation for Free Bone Block Procedures in a Rabbit Model of Glenoid Defects

BACKGROUND

Nonrigid fixation techniques have been recently introduced in free bone block (FBB) procedures to treat substantial glenoid bone loss in patients with anterior shoulder instability. However, the radiological and histological effectiveness of nonrigid fixation versus conventional rigid fixation have not been comprehensively understood in vivo.

PURPOSE

To (1) explore the radiological and histological characteristics of nonrigid fixation for FBB procedures in a rabbit model of glenoid defects and (2) further compare them with those of conventional rigid fixation.

STUDY DESIGN

Controlled laboratory study.

METHODS

Unilateral shoulder glenoid defects were created in 36 mature New Zealand White rabbits, of which 24 underwent FBB procedures using allogenic iliac crest bone and were randomly divided into rigid fixation (RF) and nonrigid fixation (N-RF) groups, with the remaining divided into 2 control groups: 6 with sham surgery for glenoid defects (GD group) and 6 native glenoids (normal group). In the RF and N-RF groups, 6 rabbits were sacrificed at 6 or 12 weeks postoperatively for radiological and histological analyses of the reconstructed glenoid, and all rabbits in the GD and normal groups were sacrificed at 12 weeks. The radiological glenoid morphology was evaluated via micro-computed tomography. Moreover, the graft-glenoid healing and graft remodeling processes were determined using histological staining.

RESULTS

At 6 weeks, both the N-RF and RF groups had similarly improved radiological axial radian and en face area of the glenoid compared with the GD group, but the N-RF group showed superiority in restoration of the glenoid radian and area compared with the RF group at 12 weeks, with the native glenoid as the baseline. Histologically, the bone graft in both groups was substantively integrated into the deficient glenoid neck at 6 and 12 weeks, showing similar osseous healing processes at the graft-glenoid junction. Moreover, the bone graft histologically presented similar regenerated vascular density, total graft bone, and integrated graft bone in both groups. In contrast, the N-RF group had a different remodeling profile on radiological and histological analyses regarding regional bone resorption, mineralization, and fibrous tissue replacement during osseointegration.

CONCLUSION

Compared with rigid fixation, nonrigid fixation resulted in superior reconstructed glenoid morphology radiologically and similar graft-glenoid osseous healing histologically, showing different graft remodeling profiles of regional bone resorption, mineralization, and fibrous tissue replacement.

CLINICAL RELEVANCE

The nonrigid fixation technique can be feasible for FBB procedures to treat glenoid bone loss in anterior shoulder instability. More clinical evidence is required to determine its pros and cons compared with conventional rigid fixation.

One-Pot Facile Encapsulation of Dimethyloxallyl Glycine by Nanoscale Zeolitic Imidazolate Frameworks-8 for Enhancing Vascularized Bone Regeneration

In the process of bone tissue regeneration, regulation of osteogenesis-angiogenesis coupling is of great importance. Therefore, dimethyloxallyl glycine (DMOG) is loaded by nanoscale zeolitic imidazolate frameworks-8 (ZIF-8) to obtain a drug-loading system that can promote osteogenesis-angiogenesis coupling. Characterization of the drug-loading nanoparticles (DMOG@ZIF-8) reveals that DMOG is successfully loaded into ZIF-8 by two different methods, and the DMOG@ZIF-8 is prepared using the one-pot method (OD@ZIF-8) achieves higher loading efficiency and longer release time than those prepared using the post-loading method (PD@ZIF-8). In vitro studies found that DMOG@ZIF-8 significantly enhances the migration, tube formation, and angiogenesis-related protein secretion of human umbilical vein endothelial cells as well as the extracellular matrix mineralization, alkaline phosphatase activity, and osteogenesis-related protein secretion of bone marrow mesenchymal stem cells. Moreover, OD@ZIF-8 nanoparticles are more efficient than PD@ZIF-8 nanoparticles in induction of osteogenesis-angiogenesis coupling. Then, in vivo cranial critical defect model shows that the addition of OD@ZIF-8 significantly promotes vascularized bone formation as indicated by the results including microcomputed tomographic, histological and immunofluorescence staining, and so on. Taken together, loading ZIF-8 with DMOG may be a promising solution for critical-sized bone defect reconstruction and the one-pot method is preferred in the preparation of such drug-loading system.

Strontium and simvastatin dual loaded hydroxyapatite microsphere reinforced poly(ε-caprolactone) scaffolds promote vascularized bone regeneration

The promotion of vascular network formation in the early stages of implantation is considered a prerequisite for successful functional bone regeneration. In this study, we successfully constructed 3D printed scaffolds with strong mechanical strength and a controllable pore structure that can sustainably release strontium (Sr) ions and simvastatin (SIM) for up to 28 days by incorporation of Sr²⁺ and SIM-loaded hydroxyapatite microspheres (MHA) into a poly(ε-caprolactone) (PCL) matrix. In vitro cell experiments showed that Sr-doped scaffolds were beneficial to the proliferation and osteogenic differentiation of bone mesenchymal stem cells (BMSCs), an appropriate dose of SIM was beneficial to cell proliferation and angiogenesis, and a high dose of SIM was cytotoxic. The Sr- and SIM-dual-loaded scaffolds with an appropriate dose significantly induced osteogenic differentiation of BMSCs and tube formation of human umbilical vein endothelial cells (HUVECs) in vitro and promoted vascular network and functional bone formation in vivo. Ribose nucleic acid (RNA) sequencing analysis suggested that the mechanism of promotion of vascularized bone regeneration by fabricated scaffolds is that dual-loaded Sr²⁺ and SIM can upregulate osteogenic and vasculogenic-related genes and downregulate osteoclast-related genes, which is beneficial for vascular and new bone regeneration. The 3D printed composite scaffolds loaded with high-stability and low-cost inorganic Sr²⁺ ions and SIM small-molecule drugs hold great promise in the field of promoting vascularized bone regeneration.

From Basic Science to Clinical Perfection: What Defines the Orthopedic Biocompatible Implant?

The general improvement in life expectancy and standard of living makes it easier for patients to get access to routine medical exams and is anticipated to increase the prevalence of several degenerative joint illnesses. In addition, it is anticipated that their incidence will increase both nationally and internationally, which will raise the demand for novel and long-lasting implantable devices in the field of orthopedics. The current review’s goals are to define what constitutes a biocompatible orthopedic implant in terms of in vitro biocompatibility testing and to clarify important concepts and definitions that are already in use. The demand for materials and implants made of various tissues is now increasing, and the ongoing advancement of in vitro cell culture studies is a reliable practical tool for examining the biocompatibility of potential implantable materials. In vitro biocompatibility research has been reduced and, in most cases, diminished to laboratory studies that no longer or drastically reduce animal sacrifice as a response to the well-known three “Rs” (“reduction”, “refinement”, and “replacement”) introduced to literature by English academics in the 1960s. As technology advances at an astounding rate, a new generation of gene-activating biomaterials tailored for specific people and disease conditions might emerge in the near future.

Bio-Activated PEEK: Promising Platforms for Improving Osteogenesis through Modulating Macrophage Polarization

The attention on orthopedic biomaterials has shifted from their direct osteogenic properties to their osteoimmunomodulation, especially the modulation of macrophage polarization. Presently, advanced technologies endow polyetheretherketone (PEEK) with good osteoimmunomodulation by modifying PEEK surface characteristics or incorporating bioactive substances with regulating macrophage polarization. Recent studies have demonstrated that the fabrication of a hydrophilic surface and the incorporation of bioactive substances into PEEK (e.g., zinc, calcium, and phosphate) are good strategies to promote osteogenesis by enhancing the polarization of M2 macrophages. Furthermore, the modification by other osteoimmunomodulatory composites (e.g., lncRNA-MM2P, IL-4, IL-10, and chitosan) and their controlled and desired release may make PEEK an optimal bio-activated implant for regulating and balancing the osteogenic system and immune system. The purpose of this review is to comprehensively evaluate the potential of bio-activated PEEK in polarizing macrophages into M2 phenotype to improve osteogenesis. For this objective, we retrieved and discussed different kinds of bio-activated PEEK regarding improving osteogenesis through modulating macrophage polarization. Meanwhile, the relevant challenges and outlook were presented. We hope that this review can shed light on the development of bio-activated PEEK with more favorable osteoimmunomodulation.

Preparation and Biocompatibility of Core-Shell Microspheres for Sequential, Sustained Release of BMP-2 and VEGF

Bone defect repair remains a challenge in orthopedics. This study describes the development and potential effectiveness of vascular endothelial growth factor (VEGF)/bone morphogenetic protein-2 (BMP-2) shell-core microspheres for promoting bone regeneration. Poly(L-lactic acid)/polylactic-co-glycolic acid (PLLA/PLGA) core-shell microspheres loaded with VEGF and BMP-2 were prepared by a coaxial electrospray technique, and their surface morphology, core-shell distribution, and particle size were examined. Different groups of microspheres were prepared with different placement of the growth factors, and the encapsulation efficiency and in vitro release curves were measured. Additionally, the effects of the different groups of microspheres on the proliferation and differentiation of osteoblasts and vascular endothelial cells were investigated. The prepared microspheres had a core-shell structure with good homogeneity and dispersion, a clear boundary, and a smooth surface. On scanning electron microscopy, the mean diameter of the microspheres was similar for all six preparations (P > 0.05). During in vitro release, growth factor was initially released via a brief burst release from the outer shell of the microsphere followed by a slower sustained release. The release of growth factors from the inner core remained relatively slow and sustained. Sequential release of different growth factors was achieved through the inconsistent release rates from the microsphere shell and inner core. All groups of microspheres showed no cytotoxicity, good biocompatibility, and the ability to promote osteoblast proliferation. The microspheres loaded with BMP-2 also promoted osteoblast differentiation, and VEGF-loaded microspheres promoted the proliferation and differentiation of vascular endothelial cells. The BMP-2 (core)/VEGF (shell) microsphere group best promoted osteoblast differentiation. The microspheres prepared in this study exhibited slow sequential release of BMP-2 and VEGF and showed good biocompatibility along with the ability to promote osteoblast differentiation and vascular endothelial cell proliferation.

Strategies to Promote Vascularization in 3D Printed Tissue Scaffolds: Trends and Challenges

Three-dimensional (3D) printing techniques for scaffold fabrication have shown promising advancements in recent years owing to the ability of the latest high-performance printers to mimic the native tissue down to submicron scales. Nevertheless, host integration and performance of scaffolds in vivo have been severely limited owing to the lack of robust strategies to promote vascularization in 3D printed scaffolds. As a result, researchers over the past decade have been exploring strategies that can promote vascularization in 3D printed scaffolds toward enhancing scaffold functionality and ensuring host integration. Various emerging strategies to enhance vascularization in 3D printed scaffolds are discussed. These approaches include simple strategies such as the enhancement of vascular in-growth from the host upon implantation by scaffold modifications to complex approaches wherein scaffolds are fabricated with their own vasculature that can be directly anastomosed or microsurgically connected to the host vasculature, thereby ensuring optimal integration. The key differences among the techniques, their pros and cons, and the future opportunities for utilizing each technique are highlighted here. The Review concludes with the current limitations and future directions that can help 3D printing emerge as an effective biofabrication technique to realize tissues with physiologically relevant vasculatures to ultimately accelerate clinical translation.

Effect of Angiogenesis in Bone Tissue Engineering

The reconstruction of large skeletal defects is still a tricky challenge in orthopedics. The newly formed bone tissue migrates sluggishly from the periphery to the center of the scaffold due to the restrictions of exchange of oxygen and nutrition impotent cells osteogenic differentiation. Angiogenesis plays an important role in bone reconstruction and more and more studies on angiogenesis in bone tissue engineering had been published. Promising advances of angiogenesis in bone tissue engineering by scaffold designs, angiogenic factor delivery, in vivo prevascularization and in vitro prevascularization are discussed in detail. Among all the angiogenesis mode, angiogenic factor delivery is the common methods of angiogenesis in bone tissue engineering and possible research directions in the future.

A brief review of mRNA therapeutics and delivery for bone tissue engineering

The therapeutics for bone tissue regeneration requires constant advancements owing to the steady increase in the number of patients suffering from bone-related disorders, and also to find efficient and cost-effective treatment modalities. One of the major advancements in the field of therapeutics is the development of mRNAs. mRNAs, which have been extensively tested for the vaccines, could be very well utilized as a potential inducer for bone regeneration. The ability of mRNAs to enter the cells and instruct the cellular machinery to produce the required native proteins such as BMP or VEGF is a great way to avoid the issues faced with growth factor deliveries such as the production cost, loss of biological function etc. However, there have been a few hurdles for using mRNAs as an effective therapeutic agent, such as proper dosing, tolerating the degradation by RNases, improving the half-life, controlling the spatio-temporal release and reducing the off-target effects. This brief review discusses the various developments in the field of mRNA therapeutics especially for bone tissue engineering, how nano-formulations are being developed to effectively deliver the mRNAs into the cells by evading the immune responses, how researchers have developed certain strategies to increase the half-life, to successfully deliver the mRNAs to specific bone defect area and bring about effective bone regeneration.

Advanced PLGA hybrid scaffold with a bioactive PDRN/BMP2 nanocomplex for angiogenesis and bone regeneration using human fetal MSCs

Biodegradable polymers have been used with various systems for tissue engineering. Among them, poly(lactic-co-glycolic) acid (PLGA) has been widely used as a biomaterial for bone regeneration because of its great biocompatibility and biodegradability properties. However, there remain substantial cruxes that the by-products of PLGA result in an acidic environment at the implanting site, and the polymer has a weak mechanical property. In our previous study, magnesium hydroxide (MH) and bone extracellular matrix are combined with a PLGA scaffold (PME) to improve anti-inflammation and mechanical properties and osteoconductivity. In the present study, the development of a bioactive nanocomplex (NC) formed along with polydeoxyribonucleotide and bone morphogenetic protein 2 (BMP2) provides synergistic abilities in angiogenesis and bone regeneration. This PME hybrid scaffold immobilized with NC (PME/NC) achieves outstanding performance in anti-inflammation, angiogenesis, and osteogenesis. Such an advanced PME/NC scaffold suggests an integrated bone graft substitute for bone regeneration.

Nanoscale mineralization of cell-laden methacrylated gelatin hydrogels using calcium carbonate-calcium citrate core-shell microparticles

Conventional biomaterials developed for bone regeneration fail to fully recapitulate the nanoscale structural organization and complex composition of the native bone microenvironment. Therefore, despite promoting osteogenic differentiation of stem cells, they fall short of providing the structural, biochemical, and mechanical stimuli necessary to drive osteogenesis for bone regeneration and function. To address this, we have recently developed a novel strategy to engineer bone-like tissue using a biomimetic approach to achieve rapid and controlled nanoscale mineralization of a cell-laden matrix in the presence of osteopontin, a non-collagenous protein, and a supersaturated solution of calcium and phosphate medium. Here, we build on this approach to engineer bone regeneration scaffolds comprising methacrylated gelatin (GelMA) hydrogels incorporated with calcium citrate core-shell microparticles as a sustained and reliable source of calcium ions for in situ mineralization. We demonstrate successful biomineralization of GelMA hydrogels by embedded calcium carbonate-calcium citrate core-shell microparticles with the resultant mineral chemistry, structure, and organization reminiscent of that of native bone. The biomimetic mineralization was further shown to promote osteogenic differentiation of encapsulated human mesenchymal stem cells even in the absence of other exogenous osteogenic induction factors. Ultimately, by combining the superior biological response engendered by biomimetic mineralization with the intrinsic tissue engineering advantages offered by GelMA, such as biocompatibility, biodegradability, and printability, we envision that our system offers great potential for bone regeneration efforts.

Affinity-Controlled Double-Network Hydrogel Facilitates Long-Term Release of Anti-Human Papillomavirus Protein

Hydrogels have recently received attention as delivery carriers owing to their good biocompatibility and structural similarity to natural extracellular matrices. However, the utilization of traditional single-network (SN) hydrogels is limited by poor mechanical properties and burst drug release. Therefore, we developed a novel double-network (DN) hydrogel, which employs an alginate (ALG)/polyethylene glycol diacrylate (PEGDA) network to adjust the mechanical strength and a positively charged monomer AETAC (2-(acryloyloxy)ethyl]trimethyl-ammonium chloride) to regulate the release curve of the electronegative anti-human papillomavirus (HPV) protein (bovine β-lactoglobulin modified with 3-hydroxyphthalic anhydride) based on an affinity-controlled delivery mechanism. The results show that the double-network hydrogel strongly inhibits the burst release, and the burst release amount is about one-third of that of the single-network hydrogel. By changing the concentration of the photoinitiator, the mechanical strength of the DN hydrogels can be adjusted to meet the stiffness requirements for various tissues within the range of 0.71 kPa to 10.30 kPa. Compared with the SN hydrogels, the DN hydrogels exhibit almost twice the mechanical strength and have smaller micropores. Cytotoxicity tests indicated that these SN and DN hydrogels were not cytotoxic with the result of over 100% relative proliferation rate of the HUVECs. Furthermore, DN hydrogels can significantly alleviate the burst release of antiviral proteins and prolong the release time to more than 14 days. Finally, we utilized digital light processing (DLP) technology to verify the printability of the DN hydrogel. Our study indicates that ALG/PEGDA-AETAC DN hydrogels could serve as platforms for delivering proteins and show promise for diverse tissue engineering applications.

A baicalin-loaded coaxial nanofiber scaffold regulated inflammation and osteoclast differentiation for vascularized bone regeneration

We demonstrate a simple, effective and feasible method to address the shrinkage of Poly (lactic-co-glycolic acid) (PLGA) through a core-shell structure fiber strategy. The results revealed that introducing size-stable poly-caprolactone (PCL) as the core fiber significantly improved the PLGA-based fibrous scaffold's dimensional maintenance. We further utilized fish collagen to modify the PLGA shell layer (PFC) of coaxial fibers and loaded baicalin (BA) into the PCL core layer (PCL-BA) to endow fibrous scaffold with more functional biological cues. The PFC/PCL-BA fibrous scaffold promoted the osteogenic differentiation of bone mesenchymal stem cells and stimulated the RAW264.7 cells to polarize into a pro-reparative phenotype. Importantly, the in vivo study demonstrated that the PFC/PCL-BA scaffold could regulate inflammation and osteoclast differentiation, favor neovascularization and bone formation. This work tactfully combined PLGA and PCL to establish a drug release platform based on the core-shell fibrous scaffold for vascularized bone regeneration.

•

A multifunctional baicalin-loaded coaxial fiber scaffold prepared by electrospinning.

•

The coaxial nanofiber can effectively resist the shrinkage of PLGA.

•

Baicalin endow the nanofibrous scaffold with excellent biological properties.

•

The scaffold can alleviate the inflammation and achieve vascularized bone regeneration.

Promotion of Bone Regeneration Using Bioinspired PLGA/MH/ECM Scaffold Combined with Bioactive PDRN

Current approaches of biomaterials for the repair of critical-sized bone defects still require immense effort to overcome numerous obstacles. The biodegradable polymer-based scaffolds have been required to expand further function for bone tissue engineering. Poly(lactic-co-glycolic) acid (PLGA) is one of the most common biopolymers owing to its biodegradability for tissue regenerations. However, there are major clinical challenges that the byproducts of the PLGA cause an acidic environment of implanting site. The critical processes in bone repair are osteogenesis, angiogenesis, and inhibition of excessive osteoclastogenesis. In this study, the porous PLGA (P) scaffold was combined with magnesium hydroxide (MH, M) and bone-extracellular matrix (bECM, E) to improve anti-inflammatory ability and osteoconductivity. Additionally, the bioactive polydeoxyribonucleotide (PDRN, P) was additionally incorporated in the existing PME scaffold. The prepared PMEP scaffold has pro-osteogenic and pro-angiogenic effects and inhibition of osteoclast due to the PDRN, which interacts with the adenosine A_2A receptor agonist that up-regulates expression of vascular endothelial growth factor (VEGF) and down-regulates inflammatory cytokines. The PMEP scaffold has superior biological properties for human bone-marrow mesenchymal stem cells (hBMSCs) adhesion, proliferation, and osteogenic differentiation in vitro. Moreover, the gene expressions related to osteogenesis and angiogenesis of hBMSCs increased and the inflammatory factors decreased on the PMEP scaffold. In conclusion, it provides a promising strategy and clinical potential candidate for bone tissue regeneration and repairing bone defects.

Gene activated scaffolds incorporating star-shaped polypeptide-pDNA nanomedicines accelerate bone tissue regeneration in vivo

Increasingly, tissue engineering strategies such as the use of biomaterial scaffolds augmented with specific biological cues are being investigated to accelerate the regenerative process. For example, significant clinical challenges still exist in efficiently healing large bone defects which are above a critical size. Herein, we describe a cell-free, biocompatible and bioresorbable scaffold incorporating a novel star-polypeptide biomaterial as a gene vector. This gene-loaded scaffold can accelerate bone tissue repair in vivo in comparison to a scaffold alone at just four weeks post implantation in a critical sized bone defect. This is achieved via the in situ transfection of autologous host cells which migrate into the implanted collagen-based scaffold via gene-loaded, star-shaped poly(l-lysine) polypeptides (star-PLLs). In vitro, we demonstrate that star-PLL nanomaterials designed with 64 short poly(l-lysine) arms can be used to functionalise a range of collagen based scaffolds with a dual therapeutic cargo (pDual) of the bone-morphogenetic protein-2 plasmid (pBMP-2) and vascular endothelial growth factor plasmid (pVEGF). The versatility of this polymeric vector is highlighted in its ability to transfect Mesenchymal Stem Cells (MSCs) with both osteogenic and angiogenic transgenes in a 3D environment from a range of scaffolds with various macromolecular compositions. In vivo, we demonstrate that a bone-mimetic, collagen-hydroxyapatite scaffold functionalized with star-PLLs containing either 32- or 64- poly(l-lysine) arms can be used to successfully deliver this pDual cargo to autologous host cells. At the very early timepoint of just 4 weeks, we demonstrate the 64-star-PLL-pDual functionalised scaffold as a particularly efficient platform to accelerate bone tissue regeneration, with a 6-fold increase in new bone formation compared to a scaffold alone. Overall, this article describes for the first time the incorporation of novel star-polypeptide biomaterials carrying two therapeutic genes into a cell free scaffold which supports accelerated bone tissue formation in vivo.

Triple growth factor delivery promotes functional bone regeneration following composite musculoskeletal trauma

Successful bone healing in severe trauma depends on early revascularization to restore oxygen, nutrient, growth factor, and progenitor cell supply to the injury. Therapeutic angiogenesis strategies have therefore been investigated to promote revascularization following severe bone injuries; however, results have been inconsistent. This is the first study investigating the effects of dual angiogenic growth factors (VEGF and PDGF) with low-dose bone morphogenetic protein-2 (BMP-2; 2.5 µg) on bone healing in a clinically challenging composite bone-muscle injury model. Our hydrogel-based delivery systems demonstrated a more than 90% protein entrapment efficiency and a controlled simultaneous release of three growth factors over 28 days. Co-stimulation of microvascular fragment constructs with VEGF and PDGF promoted vascular network formation in vitro compared to VEGF or PDGF alone. In an in vivo model of segmental bone and volumetric muscle loss injury, combined VEGF (5 µg) and PDGF (7.5 µg or 15 µg) delivery with a low dose of BMP-2 significantly enhanced regeneration of vascularized bone compared to BMP-2 treatment alone. Notably, the regenerated bone mechanics reached ~60% of intact bone, a value that was previously only achieved by delivery of high-dose BMP-2 (10 µg) in this injury model. Overall, sustained delivery of VEGF, PDFG, and BMP-2 is a promising strategy to promote functional vascularized bone tissue regeneration following severe composite musculoskeletal injury. Although this study is conducted in a clinically relevant composite injury model in rats using a simultaneous release strategy, future studies are necessary to test the regenerative potential of spatiotemporally controlled delivery of triple growth factors on bone healing using large animal models. STATEMENT OF SIGNIFICANCE: Volumetric muscle loss combined with delayed union or non-union bone defect causes deleterious effects on bone regeneration even with the supplementation of bone morphogenetic protein-2 (BMP-2). In this study, the controlled delivery of dual angiogenic growth factors (vascular endothelial growth factor [VEGF] + Platelet-derived growth factor [PDGF]) increases vascular growth in vitro. Co-delivering VEGF+PDGF significantly increase the bone formation efficacy of low-dose BMP-2 and improves the mechanics of regenerated bone in a challenging composite bone-muscle injury model.

Recent advances in PLGA-based biomaterials for bone tissue regeneration

Bone regeneration is an interdisciplinary complex lesson, including but not limited to materials science, biomechanics, immunology, and biology. Having witnessed impressive progress in the past decades in the development of bone substitutes; however, it must be said that the most suitable biomaterial for bone regeneration remains an area of intense debate. Since its discovery, poly (lactic-co-glycolic acid) (PLGA) has been widely used in bone tissue engineering due to its good biocompatibility and adjustable biodegradability. This review systematically covers the past and the most recent advances in developing PLGA-based bone regeneration materials. Taking the different application forms of PLGA-based materials as the starting point, we describe each form's specific application and its corresponding advantages and disadvantages with many examples. We focus on the progress of electrospun nanofibrous scaffolds, three-dimensional (3D) printed scaffolds, microspheres/nanoparticles, hydrogels, multiphasic scaffolds, and stents prepared by other traditional and emerging methods. Finally, we briefly discuss the current limitations and future directions of PLGA-based bone repair materials. STATEMENT OF SIGNIFICANCE: As a key synthetic biopolymer in bone tissue engineering application, the progress of PLGA-based bone substitute is impressive. In this review, we summarized the past and the most recent advances in the development of PLGA-based bone regeneration materials. According to the typical application forms and corresponding crafts of PLGA-based substitutes, we described the development of electrospinning nanofibrous scaffolds, 3D printed scaffolds, microspheres/nanoparticles, hydrogels, multiphasic scaffolds and scaffolds fabricated by other manufacturing process. Finally, we briefly discussed the current limitations and proposed the newly strategy for the design and fabrication of PLGA-based bone materials or devices.

Vascular Endothelial Growth Factor and Mesenchymal Stem Cells Revealed Similar Bone Formation to Allograft in a Sheep Model

Introduction

Mesenchymal stem cells (MSCs) and vascular endothelial growth factor (VEGF) are key factors in bone regeneration. Further stimulation should establish an enhanced cell environment optimal for vessel evolvement and hereby being able to attract bone-forming cells. The aim of this study was to generate new bone by using MSCs and VEGF, being able to stimulate growth equal to allograft.

Methods

Eight Texel/Gotland sheep had four titanium implants in a size of 10 × 12 mm inserted into bilateral distal femurs, containing a 2 mm gap. In the gap, autologous 3 × 10⁶ MSCs seeded on hydroxyapatite (HA) granules in combination with 10 ng, 100 ng, and 500 ng VEGF release/day were added. After 12 weeks, the implant-bone blocks were harvested, embedded, and sectioned for histomorphometric analysis. Bone formation and mechanical fixation were evaluated. Blood samples were collected for the determination of bone-related biomarkers and VEGF in serum at weeks 0, 1, 4, 8, and 12.

Results

The combination of 3 × 10⁶ MSCs with 10 ng, 100 ng, and 500 ng VEGF release/day exhibited similar amount of bone formation within the gap as allograft (P > 0.05). Moreover, no difference in mechanical fixation was observed between the groups (P > 0.05). Serum biomarkers showed no significant difference compared to baseline (all P > 0.05).

Conclusion

MSCs and VEGF exhibit significant bone regeneration, and their bone properties equal to allograft, with no systemic increase in osteogenic markers or VEGF with no visible side effects. This study indicates a possible new approach into solving the problem of insufficient allograft, in larger bone defects.

Prevascularized hydrogels with mature vascular networks promote the regeneration of critical-size calvarial bone defects in vivo

Adequate vascularization of scaffolds is a prerequisite for successful repair and regeneration of lost and damaged tissues. It has been suggested that the maturity of engineered vascular capillaries, which is largely determined by the presence of functional perivascular mural cells (or pericytes), plays a vital role in maintaining vessel integrity during tissue repair and regeneration. Here, we investigated the role of pericyte-supported-engineered capillaries in regenerating bone in a critical-size rat calvarial defect model. Prior to implantation, human umbilical vein endothelial cells and human bone marrow stromal cells (hBMSCs) were cocultured in a collagen hydrogel to induce endothelial cell morphogenesis into microcapillaries and hBMSC differentiation into pericytes. Upon implantation into the calvarial bone defects (8 mm), the prevascularized hydrogels showed better bone formation than either untreated controls or defects treated with autologous bone grafts (positive control). Bone formation parameters such as bone volume, coverage area, and vascularity were significantly better in the prevascularized hydrogel group than in the autologous bone group. Our results demonstrate that tissue constructs engineered with pericyte-supported vascular capillaries may approximate the regenerative capacity of autologous bone, despite the absence of osteoinductive or vasculogenic growth factors.

Advances in Growth Factor Delivery for Bone Tissue Engineering

Shortcomings related to the treatment of bone diseases and consequent tissue regeneration such as transplants have been addressed to some extent by tissue engineering and regenerative medicine. Tissue engineering has promoted structures that can simulate the extracellular matrix and are capable of guiding natural bone repair using signaling molecules to promote osteoinduction and angiogenesis essential in the formation of new bone tissues. Although recent studies on developing novel growth factor delivery systems for bone repair have attracted great attention, taking into account the complexity of the extracellular matrix, scaffolding and growth factors should not be explored independently. Consequently, systems that combine both concepts have great potential to promote the effectiveness of bone regeneration methods. In this review, recent developments in bone regeneration that simultaneously consider scaffolding and growth factors are covered in detail. The main emphasis in this overview is on delivery strategies that employ polymer-based scaffolds for spatiotemporal-controlled delivery of both single and multiple growth factors in bone-regeneration approaches. From clinical applications to creating alternative structural materials, bone tissue engineering has been advancing constantly, and it is relevant to regularly update related topics.

Sequential dual-drug delivery of BMP-2 and alendronate from hydroxyapatite-collagen scaffolds for enhanced bone regeneration

The clinical use of bioactive molecules in bone regeneration has been known to have side effects, which result from uncontrolled and supraphysiological doses. In this study, we demonstrated the synergistic effect of two bioactive molecules, bone morphogenic protein-2 (BMP-2) and alendronate (ALN), by releasing them in a sequential manner. Collagen-hydroxyapatite composite scaffolds functionalized using BMP-2 are loaded with biodegradable microspheres where ALN is encapsulated. The results indicate an initial release of BMP-2 for a few days, followed by the sequential release of ALN after two weeks. The composite scaffolds significantly increase osteogenic activity owing to the synergistic effect of BMP-2 and ALN. Enhanced bone regeneration was identified at eight weeks post-implantation in the rat 8-mm critical-sized defect. Our findings suggest that the sequential delivery of BMP-2 and ALN from the scaffolds results in a synergistic effect on bone regeneration, which is unprecedented. Therefore, such a system exhibits potential for the application of cell-free tissue engineering.

Nanohydroxyapatite/polyamide 66 crosslinked with QK and BMP-2-derived peptide prevented femur nonunion in rats

A dual-peptide controlled released system based on nHA/PA66 scaffold for enhancing bone regeneration.

Targeted nanomedicines for the treatment of bone disease and regeneration

Targeted delivery by either passive or active targeting of therapeutics to the bone is an attractive treatment for various bone related diseases such as osteoporosis, osteosarcoma, multiple myeloma, and metastatic bone tumors. Engineering novel drug delivery carriers can increase therapeutic efficacy and minimize the risk of side effects. Developmnet of nanocarrier delivery systems is an interesting field of ongoing studies with opportunities to provide more effective therapies. In addition, preclinical nanomedicine research can open new opportunities for preclinical bone-targeted drug delivery; nevertheless, further research is needed to progress these therapies towards clinical applications. In the present review, the latest advancements in targeting moieties and nanocarrier drug delivery systems for the treatment of bone diseases are summarized. We also review the regeneration capability and effective delivery of nanomedicines for orthopedic applications.

Embedding cells within nanoscale, rapidly mineralizing hydrogels: A new paradigm to engineer cell-laden bone-like tissue

Bone mineralization is a highly specific and dynamic nanoscale process that has been studied extensively from a structural, chemical, and biological standpoint. Bone tissue, therefore, may be defined by the interplay of its intricately mineralized matrix and the cells that regulate its biological function. However, the far majority of engineered bone model systems and bone replacement materials have been unable to replicate this key characteristic of bone tissue; that is, the ability of cells to be gradually and rapidly embedded in a three-dimensional (3D) heavily calcified matrix material. Here we review the characteristics that define the bone matrix from a nanostructural perspective. We then revisit the benefits and challenges of existing model systems and engineered bone replacement materials, and discuss recent efforts to replicate the biological, cellular, mechanical, and materials characteristics of bone tissue on the nano- to microscale. We pay particular attention to a recently proposed method developed by our group, which seeks to replicate key aspects of the entrapment of bone cells within a mineralized matrix with precisions down to the level of individual nano-crystallites, inclusive of the bone vasculature, and osteogenic differentiation process. In summary, this paper discusses existing and emerging evidence pointing towards future developments bridging the gap between the fields of biomineralization, structural biology, stem cells, and tissue engineering, which we believe will hold the key to engineer truly functional bone-like tissue in the laboratory.

Emerging local delivery strategies to enhance bone regeneration

In orthopedics and dentistry there is an increasing need for novel biomaterials and clinical strategies to achieve predictable bone regeneration. These novel molecular strategies have the potential to eliminate the limitations of currently available approaches. Specifically, they have the potential to reduce or eliminate the need to harvest autogenous bone, and the overall complexity of the clinical procedures. In this review, emerging tissue engineering strategies that have been, or are currently being, developed based on the current understanding of bone biology, development and wound healing will be discussed. In particular, protein/peptide based approaches, DNA/RNA therapeutics, cell therapy, and the use of exosomes will be briefly covered. The review ends with a summary of the current status of these approaches, their clinical translational potentials and their challenges.

Controlled Delivery of Growth Factor by Hierarchical Nanostructured Core-Shell Nanofibers for the Efficient Repair of Critical-Sized Rat Calvarial Defect

Electrospun nanofibers have received much attention as bone tissue-engineered scaffolds for their capacity to mimic the structure of natural extracellular matrix (ECM). Most studies have reproduced nanofibers with smooth surface for tissue engineering. This is quite different from the triple-helical nanotopography of natural collagen nanofibrils. In this study, hierarchical nanostructures were coated on the surface of drug-loaded core-shell nanofibers to mimic natural collagen nanofibrils. The nanoshish-kebab (SK) structure was decorated regularly on the surface of the nanofibers, and the inner-loaded bone morphogenetic protein 2 (BMP2) exhibited a gentle release pattern, similar to a zero-order release pattern in kinetics. The in vitro study also showed that the SK structure could accelerate cell proliferation, attachment, and osteogenic differentiation. Four groups of scaffolds were implanted in vivo to repair critical-sized rat calvarial defects: (1) PCL/PVA (control); (2) SK-PCL/PVA; (3) PCL/PVA-BMP2; and (4) SK-PCL/PVA-BMP2. Much more bone was formed in the SK-PCL/PVA group (24.57 ± 3.81%) than in the control group (1.21 ± 0.23%). The BMP2-loaded core-shell nanofibers with nanopatterned structure (SK-PCL/PVA-BMP2) displayed the best repair efficacy (76.38 ± 4.13%), followed by the PCL/PVA-BMP2 group (39.86 ± 5.74%). It was believed that the hierarchical nanostructured core-shell nanofibers could promote osteogeneration and that the SK structure showed synergistic ability with nanofiber-loaded BMP2 in vivo for bone regeneration. Thus, this BMP2-loaded core-shell nanofiber scaffold with hierarchical nanostructure holds great potential for bone tissue engineering applications.

Magnetically Responsive Polymeric Microparticles for the Triggered Delivery of a Complex Mixture of Human Placental Proteins

Bone loss through traumatic injury is a significant clinical issue. Researchers have created many scaffold types to mimic an extracellular matrix to provide structural support for the formation of new bone, however functional regeneration of larger scaffolds has not been fully achieved. Newer scaffolds aim to deliver bioactive molecules to improve tissue regeneration. To achieve a more comprehensive regenerative response, a magnetically triggerable polymeric microparticle platform is developed for the on-demand release of a complex mixture of isolated human placental proteins. This system is composed of polycaprolactone (PCL) microparticles, encapsulating magnetic nanoparticles (MNPs), and placental proteins. When subjected to an alternating magnetic field (AMF), the MNPs heat and melt the PCL, enhancing the diffusion of proteins from microparticles. When the field is off, the PCL re-solidifies. This potentially allows for cyclic drug delivery. Here the design, synthesis, and proof-of-concept experiments for this system are reported. In addition, it is shown that the proteins retain function after being magnetically released. The ability to trigger the release of complex protein mixtures on-demand may provide a significant advantage with wounds where stagnation of healing processes can occur (e.g., large segmented bone defects).

Effects of controlled dual growth factor delivery on bone regeneration following composite bone-muscle injury

The objective of this study was to investigate the controlled release of two growth factors (BMP-2 and VEGF) as a treatment strategy for bone healing in clinically challenging composite injuries, consisting of a femoral segmental bone defect and volumetric muscle loss. This is the first investigation of dual growth factor delivery in a composite injury model using an injectable delivery system consisting of heparin microparticles and alginate gel. The loading efficiency of growth factors into these biomaterials was found to be >90%, revealing a strong affinity of VEGF and BMP-2 to heparin and alginate. The system could achieve simultaneous or tunable release of VEGF and BMP-2 by varying the loading strategy. Single growth factor delivery (VEGF or BMP-2 alone) significantly enhanced vascular growth in vitro. However, no synergistic effect was observed for dual growth factor (BMP-2 + VEGF) delivery in vitro. Effective bone healing was achieved in all treatment groups (BMP-2, simultaneous or tunable delivery of BMP-2 and VEGF) in the composite injury model. The mechanics of the regenerated bone reached a maximum strength of ~52% of intact bone with tunable delivery of VEGF and BMP-2. Overall, simultaneous or tunable co-delivery of low-dose BMP-2 and VEGF failed to fully restore the mechanics of bone in this injury model. Given the severity of the composite injury, VEGF alone may not be sufficient to establish mature and stable blood vessels when compared with previous studies co-delivering BMP-2+VEGF enhanced bone tissue regeneration. Hence, future studies are warranted to develop an alternative treatment strategy focusing on better control over growth factor dose, spatiotemporal delivery, and additional growth factors to regenerate fully functional bone tissue. STATEMENT OF SIGNIFICANCE: We have developed an injectable delivery system consisting of heparin microparticles and an alginate hydrogel that is capable of delivering multiple growth factors in a tunable manner. We used this delivery system to deliver BMP-2 and VEGF in a rodent model of composite bone-muscle injury that mimics clinical type III open fractures. An advanced treatment strategy is necessary for these injuries in order to avoid the negative side effects of high doses of growth factors and because it has been shown that the addition of a muscle injury in this model attenuates the bone regenerative effect of BMP-2. This is the first study to test the effects of dual growth factor delivery (BMP-2/VEGF) on bone healing in a composite bone-muscle injury model and is expected to open up new directions in protein delivery for regenerative medicine.

Immobilization of BMP-2 and VEGF within Multilayered Polydopamine-Coated Scaffolds and the Resulting Osteogenic and Angiogenic Synergy of Co-Cultured Human Mesenchymal Stem Cells and Human Endothelial Progenitor Cells

We have previously reported the fabrication of a polycaprolactone and hydroxyapatite composite scaffold incorporating growth factors to be used for bone regeneration. Two growth factors were incorporated employing a multilayered coating based on polydopamine (PDA). In particular, Bone morphogenetic protein-2 (BMP-2) was bound onto the inner PDA layer while vascular endothelial growth factor (VEGF) was immobilized onto the outer one. Herein, the in vitro release of both growth factors is evaluated. A fastest VEGF delivery followed by a slow and more sustained release of BMP-2 was demonstrated, thus fitting the needs for bone tissue engineering applications. Due to the relevance of the crosstalk between bone-promoting and vessel-forming cells during bone healing, the functionalized scaffolds are further assessed on a co-culture setup of human mesenchymal stem cells and human endothelial progenitor cells. Osteogenic and angiogenic gene expression analysis indicates a synergistic effect between the growth factor-loaded scaffolds and the co-culture conditions. Taken together, these results indicate that the developed scaffolds hold great potential as an efficient platform for bone-tissue applications.

Multi-layered polydopamine coatings for the immobilization of growth factors onto highly-interconnected and bimodal PCL/HA-based scaffolds

For bone tissue engineering applications, scaffolds that mimic the porous structure of the extracellular matrix are highly desirable. Herein, we employ a PCL/HA-based scaffold with a double-scaled architecture of small pores coupled to larger ones. To improve the osteoinductivity of the scaffold, we incorporate two different growth factors via polydopamine (PDA) coating. As a first step, we identify the maximum amount of PDA that can be deposited onto the scaffold. Next, to allow for the deposition of a second PDA layer which, in turn, will allow to increase the loading of growth factors, we incorporate a dithiol connecting layer. The thiol groups covalently react with the first PDA coating through Michael addition while also allowing for the incorporation of a second PDA layer. We load the first and second PDA layers with bone morphogenic protein-2 (BMP2) and vascular endothelial growth factor (VEGF), respectively, and evaluate the osteogenic potential of the functionalised scaffold by cell viability, alkaline phosphatase activity and the expression of three different osteogenesis-related genes of pre-seeded human mesenchymal stem cells. Through these studies, we demonstrate that the osteogenic activity of the scaffolds loaded with both BMP2 and VEGF is greater than scaffolds loaded only with BMP2. Importantly, the osteoinductivity is higher when the scaffolds are loaded with BMP2 and VEGF in two different PDA layers. Taken together, these results indicate that the as-prepared scaffolds could be a useful construct for bone-tissue applications.

Injectable hydrogel systems with multiple biophysical and biochemical cues for bone regeneration

Bone regeneration is a complex process in which angiogenesis and osteogenesis are crucial. Introducing multiple angiogenic and osteogenic cues simultaneously into a single system and tuning these cues to optimize the niche remains a challenge for bone tissue engineering. Herein, based on our injectable biomimetic hydrogels composed of silk nanofibers (SNF) and hydroxyapatite nanoparticles (HA), deferoxamine (DFO) and bone morphogenetic protein-2 (BMP-2) were loaded on SNF and HA to introduce more angiogenic and osteogenic cues. The angiogenesis and osteogenesis capacity of injectable hydrogels could be regulated by tuning the delivery of DFO and BMP-2 independently, resulting in vascularization and bone regeneration in cranial defects. The angiogenesis and osteogenesis outcomes accelerated the regeneration of vascularized bones toward similar composition and structure to natural bones. Therefore, the multiple biophysical and chemical cues provided by the nanofibrous structures, organic-inorganic compositions, and chemical and biochemical angiogenic and osteogenic inducing cues suggest the potential for clinical applicability of these hydrogels in bone tissue engineering.

Adjuvant Drug-Assisted Bone Healing: Advances and Challenges in Drug Delivery Approaches

Bone defects of critical size after compound fractures, infections, or tumor resections are a challenge in treatment. Particularly, this applies to bone defects in patients with impaired bone healing due to frequently occurring metabolic diseases (above all diabetes mellitus and osteoporosis), chronic inflammation, and cancer. Adjuvant therapeutic agents such as recombinant growth factors, lipid mediators, antibiotics, antiphlogistics, and proangiogenics as well as other promising anti-resorptive and anabolic molecules contribute to improving bone healing in these disorders, especially when they are released in a targeted and controlled manner during crucial bone healing phases. In this regard, the development of smart biocompatible and biostable polymers such as implant coatings, scaffolds, or particle-based materials for drug release is crucial. Innovative chemical, physico- and biochemical approaches for controlled tailor-made degradation or the stimulus-responsive release of substances from these materials, and more, are advantageous. In this review, we discuss current developments, progress, but also pitfalls and setbacks of such approaches in supporting or controlling bone healing. The focus is on the critical evaluation of recent preclinical studies investigating different carrier systems, dual- or co-delivery systems as well as triggered- or targeted delivery systems for release of a panoply of drugs.

Cell-modified bioprinted microspheres for vascular regeneration

Cell therapy is a promising strategy in which living cells or cellular materials are delivered to treat a variety of diseases. Here, we developed an electrospray bioprinting method to rapidly generate cell-laden hydrogel microspheres, which limit the migration of the captured cells and provide an immunologically privileged microenvironment for cell survival in vivo. Currently, therapeutic angiogenesis aims to induce collateral vessel formation after limb ischemia. However, the clinical application of gene and cell therapy has been impeded by concerns regarding its inefficacy, as well as the associated risk of immunogenicity and oncogenicity. In this study, hydrogel microspheres encapsulating VEGF-overexpressing HEK293T cells showed good safety via subcutaneously injecting into male C57BL/6 mice. In addition, these cell-modified microspheres effectively promoted angiogenesis in a mouse hind-limb ischemia model. Therefore, we demonstrated the great therapeutic potential of this approach to induce angiogenesis in limb ischemia, indicating that bioprinting has a bright future in cell therapy.

PL/Vancomycin/Nano-hydroxyapatite Sustained-release Material to Treat Infectious Bone Defect

Objective

To evaluate the therapeutic effect of platelet lysate (PL)/vancomycin/nano-hydroxyapatite sustained-release material on treating staphylococcus aureus-induced infectious bone defects.

Methods

40 New Zealand white rabbits were inoculated with staphylococcus aureus to construct the chronic tibial infectious bone defect model. After incision, debridement and washing, control group 1 was not given any filling, control group 2 was filled with PL/nano-hydroxyapatite sustained release material, control group 3 was filled with vancomycin/ nano-hydroxyapatite sustained release material, and the treatment group was filled with PL/vancomycin/nano-hydroxyapatite sustained-release material. Afterwards, the drug release profiles were determined in vitro and in vivo. Then, X-rays and bone specimens were used to evaluate the efficacy of the treatments.

Results

TGF-β and PDGF were effectively released for 28 days in vitro. In addition, results of the inhibition zone experiment of the composite material proved that vancomycin had favorable antibacterial activity, which effectively suppressed bacteria for as long as 43 days, thus achieving the sustained-release antibacterial effect. The drug release profiles in vitro also demonstrated that the vancomycin concentration within the lesion region was the highest in composite material, and the infection in experimental rabbits was markedly alleviated. The original backbone deformity regained the normal shape, the normal bone marrow structure began to recover 6 weeks later, and the nano-hydroxyapatite transformed into the trabecula structure. By contrast, the inflammation in the control group still existed, with no obvious new bone formation.

Conclusion

The PL/vancomycin/nano-hydroxyapatite sustained-release material effectively treats chronic infectious bone defects.

Combination of a biomolecule-aided biphasic cryogel scaffold with a barrier membrane adhering PDGF-encapsulated nanofibers to promote periodontal regeneration

OBJECTIVE AND BACKGROUND

To achieve periodontal regeneration, numerous investigations have concentrated on biomolecule supplement and optimization of bone substitute or barrier membrane. This study evaluated the benefit of combining these strategies for periodontal regeneration.

METHODS

Biphasic cryogel scaffold (BCS) composed of gelatin (ligament phase) and gelatin with beta-tricalcium phosphate/hydroxyapatite (BH) (bone phase) was designed as tested bone substitute, and both enamel matrix derivatives (EMD) and bone morphogenetic protein-2 (BMP-2) were applied to formulate a biomolecule-aided BCS (BBS). Functionally graded membrane (FGM) was designed as tested barrier membrane by adhering PDGF-encapsulated poly(L-lactide-co-D/L-lactide) nanofibers on the conventional membrane (CM). BBS and FGM were characterized and tested for biocompatibility in vitro. Thirty 4 × 4 × 5 mm³ periodontal intrabony defects were created on 6 Beagle dogs. Each defect was evenly assigned to one of the following treatments including BH-CM, BCS-CM, BBS-CM, BH-FGM, BCS-FGM, and BBS-FGM, for 12 weeks. The therapeutic efficiency was assessed by micro-CT and histology.

RESULTS

BCS and FGM sustained the release of biomolecules. The viability of MSCs was maintained in both phases of BCS and was promoted while seeding on the PDGF-encapsulated nanofibers. In CM-covered sites, BBS showed significantly greater osteogenesis (P < .01) and early defect fill (P < .05) relative to BH. FGM significantly promoted osteogenesis (P < .05) in BH-treated sites but showed limited benefit in BBS-treated sites. On denuded roots, cementum deposition was evident in BBS-treated sites.

CONCLUSIONS

PDGF-loaded FGM promoted periodontal osteogenesis, and BBS with EMD-BMP-2 had potential for reconstructing alveolar ridge, periodontal ligament, and cementum. FGM and BBS combination provided limited additional benefit.

Immobilization of nanocarriers within a porous chitosan scaffold for the sustained delivery of growth factors in bone tissue engineering applications

To guide the natural bone regeneration process, bone tissue engineering strategies rely on the development of a scaffold architecture that mimics the extracellular matrix and incorporates important extracellular signaling molecules, which promote fracture healing and bone formation pathways. Incorporation of growth factors into particles embedded within the scaffold can offer both protection of protein bioactivity and a sustained release profile. In this work, a novel method to immobilize carrier nanoparticles within scaffold pores is proposed. A biodegradable, osteoconductive, porous chitosan scaffold was fabricated via the "freeze-drying method," leading to scaffolds with a storage modulus of 8.5 kPa and 300 μm pores, in line with existing bone scaffold properties. Next, poly(methyl methacrylate-co-methacrylic acid) nanoparticles were synthesized and immobilized to the scaffold via carbodiimide-crosslinker chemistry. A fluorescent imaging study confirmed that the conventional methods of protein and nanocarrier incorporation into scaffolds can lead to over 60% diffusion out of the scaffold within the first 5 min of implantation, and total disappearance within 4 weeks. The novel method of nanocarrier immobilization to the scaffold backbone via carbodiimide-crosslinker chemistry allows full retention of particles for up to 4 weeks within the scaffold bulk, with no negative effects on the viability and proliferation of human umbilical vein endothelial cells.