Lateral Flow Assay Based on Paper-Hydrogel Hybrid Material for Sensitive Point-of-Care Detection of Dengue Virus

Aptamer-modified paper-based analytical devices for the detection of food hazards: Emerging applications and future perspective

Food analysis plays a critical role in assessing human health risks and monitoring food quality and safety. Currently, there is a pressing need for a reliable, portable, and quick recognition element for point-of-care testing (POCT) to better serve the demands of on-site food analysis. Aptamer-modified paper-based analytical devices (Apt-PADs) have excellent characteristics of high portability, high sensitivity, high specificity, and on-site detection, which have been widely used and concerned in the field of food safety. The article reviews the basic components and working principles of Apt-PADs, and introduces their representative applications detecting food hazards. Finally, the advantages, challenges, and future directions of Apt-PADs-based sensing performance are discussed, to provide new directions and insights for researchers to select appropriate Apt-PADs according to specific applications.

Agarose Hydrogel-Boosted One-Tube RPA-CRISPR/Cas12a Assay for Robust Point-of-Care Detection of Zoonotic Nematode Anisakis

Rapid and accurate detection of the zoonotic nematode Anisakis is poised to control its epidemic. The clustered regularly interspaced short palindromic repeats (CRISPR)/Cas-associated assay shows great potential in the detection of pathogenic microorganisms. The one-tube method integrated the CRISPR system with the recombinase polymerase amplification (RPA) system to avoid the risk of aerosol pollution; however, it suffers from low sensitivity due to the incompatibility of the two systems and additional manual operations. Therefore, in the present study, the agarose hydrogel boosted one-tube RPA-CRISPR/Cas12a assay was constructed by adding the CRISPR system to the agarose hydrogel, which avoided the initially low amplification efficiency of RPA caused by the cleavage of Cas12a and achieved reaction continuity. The sensitivity was 10-fold higher than that of the one-tube RPA-CRISPR/Cas12a system. This method was used for Anisakis detection within 80 min from the sample to result, achieving point-of-care testing (POCT) through a smartphone and a portable device. This study provided a novel toolbox for POCT with significant application value in preventing Anisakis infection.

Lateral flow immunoassay (LFIA) for dengue diagnosis: Recent progress and prospect

Dengue is one of the most widespread and fatal arboviral infections in the world. Early detection of dengue virus (DENV) is essential to prevent the spread of the disease and provide an immediate response. The lateral flow immunoassay (LFIA) systems are low-cost, rapid, sensitive, targeted, and straightforward detection, which is an ideal early detection candidate for point-of-care testing (POCT) in dengue-affected areas. However, current commercial LFIA kits cannot fully satisfy the sensitivity, specificity, serotype differentiation, and multiplex detection requirements. Therefore, various strategies have been applied to optimize the LFIA for DENV detection, including label material improvement, optical enhancement and novel structure design. In this review, we comprehensively presented the snapshot of dengue, the principle of LFIA, and recent progress in the LFIA optimization for dengue diagnoses. Furthermore, this review also discusses insights into the prospect of LFIA dengue diagnostic methods, such as microfluidics, multiplex design, nucleic acid-typed probes and smartphone-assisted result analysis.

Toward the Development of Simplified Lateral Flow Assays Using Hydrogels as the Universal Control Line

Lateral flow assays (LFA) have been widely utilized as point-of-care testing devices in diverse fields. However, it is imperative to preprint costly bioreceptors onto the lateral flow nitrocellulose membrane at the control line. The complex manufacturing process and relatively limited detection capabilities of LFA have impeded their utilization in more challenging fields. Here, we propose a novel and simple strategy to simplify the manufacture of LFA while simultaneously improving the sensitivity by modifying the hydrogel line (HL). In our study, it was observed that the sensitivity of commercial LFA strips could be enhanced by 2-5-fold by incorporating an extra HL. Particularly, a universal control line was developed to accommodate multiple LFA detection modes by substituting the conventional antibody control line with a hydrogel control line (HCL). As a proof of concept, the HCL performance could be associated with the slowdown and interception effect toward fluid, which are dependent on the permeation and hydrophilicity of the hydrogel with varying concentrations in the nitrocellulose membrane. This new design builds the foundation to enhance the sensitivity and develop the simplified LFA sensing platform without additional complicated processes.

Lateral flow assay of pathogenic viruses and bacteria in healthcare

Healthcare-associated pathogenic viruses and bacteria can have a serious impact on human health and have attracted widespread global attention. The lateral flow assay is a unidirectional detection based on the binding of a target analyte and a bioreceptor on the device via lateral flow. With incredible advantages over traditional chromatographic methods, such as rapid detection, ease of manufacture and cost effectiveness, these test strips are increasingly considered the ideal form for point-of-care applications. This review explores lateral flow assays for pathogenic viruses and bacteria, with a particular focus on methodologies, device components, construction methods, and applications. We anticipate that this review could provide exciting opportunities for developing new lateral flow devices for pathogens and advance related healthcare applications.

Paper-based colorimetric sensors for point-of-care testing

By eliminating the need for sample transportation and centralized laboratory analysis, point-of-care testing (POCT) enables on-the-spot testing, with results available within minutes, leading to improved patient management and overall healthcare efficiency. Motivated by the rapid development of POCT, paper-based colorimetric sensing, a powerful analytical technique that exploits the changes in color or absorbance of a chemical species to detect and quantify analytes of interest, has garnered increasing attention. In this review, we strive to provide a bird's eye view of the development landscape of paper-based colorimetric sensors that harness the unique properties of paper to create low-cost, easy-to-use, and disposable analytical devices, thematically covering both fundamental aspects and categorized applications. In the end, we authors summarized the review with the remaining challenges and emerging opportunities. Hopefully, this review will ignite new research endeavors in the realm of paper-based colorimetric sensors.

Additive Manufacturing and Physicomechanical Characteristics of PEGDA Hydrogels: Recent Advances and Perspective for Tissue Engineering

In this brief review, we discuss the recent advancements in using poly(ethylene glycol) diacrylate (PEGDA) hydrogels for tissue engineering applications. PEGDA hydrogels are highly attractive in biomedical and biotechnology fields due to their soft and hydrated properties that can replicate living tissues. These hydrogels can be manipulated using light, heat, and cross-linkers to achieve desirable functionalities. Unlike previous reviews that focused solely on material design and fabrication of bioactive hydrogels and their cell viability and interactions with the extracellular matrix (ECM), we compare the traditional bulk photo-crosslinking method with the latest three-dimensional (3D) printing of PEGDA hydrogels. We present detailed evidence combining the physical, chemical, bulk, and localized mechanical characteristics, including their composition, fabrication methods, experimental conditions, and reported mechanical properties of bulk and 3D printed PEGDA hydrogels. Furthermore, we highlight the current state of biomedical applications of 3D PEGDA hydrogels in tissue engineering and organ-on-chip devices over the last 20 years. Finally, we delve into the current obstacles and future possibilities in the field of engineering 3D layer-by-layer (LbL) PEGDA hydrogels for tissue engineering and organ-on-chip devices.

Biosensors for healthcare: current and future perspectives

Biosensors are utilized in several different fields, including medicine, food, and the environment; in this review, we examine recent developments in biosensors for healthcare. These involve three distinct types of biosensor: biosensors for in vitro diagnosis with blood, saliva, or urine samples; continuous monitoring biosensors (CMBs); and wearable biosensors. Biosensors for in vitro diagnosis have seen a significant expansion recently, with newly reported clustered regularly interspaced short palindromic repeats (CRISPR)/Cas methodologies and improvements to many established integrated biosensor devices, including lateral flow assays (LFAs) and microfluidic/electrochemical paper-based analytical devices (μPADs/ePADs). We conclude with a discussion of two novel groups of biosensors that have drawn great attention recently, continuous monitoring and wearable biosensors, as well as with perspectives on the commercialization and future of biosensors.

Progression of Paper-Based Point-of-Care Testing toward Being an Indispensable Diagnostic Tool in Future Healthcare

Point-of-care (POC) diagnostics in particular focuses on the timely identification of harmful conditions close to the patients' needs. For future healthcare these diagnostics could be an invaluable tool especially in a digitalized or telemedicine-based system. However, while paper-based POC tests, with the most prominent example being the lateral flow assay (LFA), have been especially successful due to their simplicity and timely response, the COVID-19 pandemic highlighted their limitations, such as low sensitivity and ambiguous responses. This perspective discusses strategies that are currently being pursued to evolve such paper-based POC tests toward a superior diagnostic tool that provides high sensitivities, objective result interpretation, and multiplexing options. Here, we pinpoint the challenges with respect to (i) measurability and (ii) public applicability, exemplified with select cases. Furthermore, we highlight promising endeavors focused on (iii) increasing the sensitivity, (iv) multiplexing capability, and (v) objective evaluation to also ready the technology for integration with machine learning into digital diagnostics and telemedicine. The status quo in academic research and industry is outlined, and the likely highly relevant role of paper-based POC tests in future healthcare is suggested.

Advanced Plasmonic Nanoparticle-Based Techniques for the Prevention, Detection, and Treatment of Current COVID-19

Coronavirus is an ongoing global pandemic caused by severe acute respiratory syndrome coronavirus 2. Coronavirus disease 2019 known as COVID-19 is the worst pandemic since World War II. The outbreak of COVID-19 had a significant repercussion on the health, economy, politics, and environment, making coronavirus-related issues more complicated and becoming one of the most challenging pandemics of the last century with deadly outcomes and a high rate of the reproduction number. There are thousands of different types - or variants - of COVID circulating across the world. Viruses mutate all the time; it emphasizes the critical need for the designing of efficient vaccines to prevent virus infection, early and fast diagnosis, and effective antiviral and protective therapeutics. In this regard, the use of nanotechnology offers new opportunities for the development of novel strategies in terms of prevention, diagnosis, and treatment of COVID-19. This review presents an outline of the platforms developed using plasmonic nanoparticles in the detection, treatment, and prevention of SARS-CoV-2. We select the best strategies in each of these approaches. The properties of metallic plasmon NPs and their relevance in the development of novel point-of-care diagnosis approaches for COVID-19 are highlighted. Also, we discuss the current challenges and the future perspectives looking towards the clinical translation and the commercial aspects of nanotechnology and plasmonic NP-based diagnostic tools and therapy to fight COVID-19 pandemic. The article could be of significance for researchers dedicated to developing suitable plasmonic detection tools and therapy approaches for COVID-19 viruses and future pandemics.

Flap Endonuclease-Induced Steric Hindrance Change Enables the Construction of Multiplex and Versatile Lateral Flow Strips for DNA Detection

A lateral flow strip (LFS) is an ideal tool for point-of-care testing (POCT), but traditional LFSs cannot be used for multiplex detection. Herein, a multiplex and versatile LFS based on flap endonuclease 1 (FEN1)-induced steric hindrance change (FISH-LFS) is proposed. In this method, multiplex PCR coupled with cascade invasive reactions was employed to yield single-stranded flaps, which were target-specific but independent of target sequences. Then, the amplicons were applied for FISH-LFS, and the single-stranded flaps would be efficiently captured by the complementary LFS-probes at different test lines. As flaps were cleaved from the specially designed hairpin probes, competition among flaps and hairpin probes would occur in capturing the probes at test lines. We enabled the hairpin probes to flow through the test lines while the flaps to stay at the test lines by making use of the difference in steric hindrance between hairpin probes and flaps. The assay is able to detect as low as two copies of blood pathogens (HBV, HCV, and HIV), to pick up as low as 0.1% mutants from wild-type gDNA, and to genotype 200 copies of SARS-CoV-2 variants α and β within 75 min at a conventional PCR engine. As the method is free of dye, a portable PCR engine could be used for a cost-effective multiplex detection on site. Results using an ultrafast mobile PCR system for FISH-LFS showed that as fast as 30 min was achieved for detecting three pathogens (HBV, HCV, and HIV) in blood, very suitable for POCT of pathogen screening. The method is convenient in operation, simple in instrumentation, specific in genotyping, and very easy in setting up multiplex POCT assays.

Cohesion mechanisms for bioadhesives

Due to the nature of non-invasive wound closure, the ability to close different forms of leaks, and the potential to immobilize various devices, bioadhesives are altering clinical practices. As one of the vital factors, bioadhesives' strength is determined by adhesion and cohesion mechanisms. As well as being essential for adhesion strength, the cohesion mechanism also influences their bulk functions and the way the adhesives can be applied. Although there are many published reports on various adhesion mechanisms, cohesion mechanisms have rarely been addressed. In this review, we have summarized the most used cohesion mechanisms. Furthermore, the relationship of cohesion strategies and adhesion strategies has been discussed, including employing the same functional groups harnessed for adhesion, using combinational approaches, and exploiting different strategies for cohesion mechanism. By providing a comprehensive insight into cohesion strategies, the paper has been integrated to offer a roadmap to facilitate the commercialization of bioadhesives.

•

Bioadhesive are altering clinical practices.

•

Bioadhesives for medical applications needs different cohesion strategies.

•

Better understanding of cohesion mechanism can design suitable bioadhesives.

3D printed hydrophobic barriers in a paper-based biosensor for point-of-care detection of dengue virus serotypes

Paper-based biosensor is one of the most commonly used platforms for point-of-care testing (POCT). Among these platforms, microfluidic paper-based analytical devices (μPADs) have the most versatile designs due to the different hydrophobic barrier patterns and layers of the devices. In addition, μPADs can also be used in combination with other biosensor platforms to improve the performance of the device. Simple and convenient methods for fabricating low-cost and design-adjustable hydrophobic barriers on paper are one of the most challenging aspects for creating μPADs. This work demonstrated a simple technique for using the common polylactic acid (PLA) filament and wax filament to create hydrophobic barriers on paper for μPADs using a commercialized 3D printer. As a proof of concept, the papers with 3D printed PLA barrier were used in combination with a fluidic chip in a prototype biosensor, in which the barrier paper housed four cell-free reactions and the fluidic chip achieved sample delivery to the reactions in the device. Our designed prototype was capable of discriminating dengue virus serotypes based on small nucleotide sequence differences. The proposed combination of 3D-printed barrier paper and fluidic chip provides a versatile platform for rapid prototyping of POCT with possible compatibility with various detection systems.

Ball pen writing-without-ink: a truly simple and accessible method for sensitivity enhancement in lateral flow assays

Lateral flow assays (LFAs), a popular point-of-care testing platform, have found widespread applications from laboratory to clinics. However, LFA-based testing is still subject to limited detection sensitivity, especially for classical gold nanoparticle-based LFAs. Inspired by traditional pen-based writing technologies, we developed a ball pen writing-without-ink method to amplify the detection signal of LFAs through controlling fluid flow rate. An enhancement of detection sensitivity by two times was obtained. Since the underlying mechanism of this method to improve detection sensitivity is to control the flow rate of the liquid on paper, it may be suitable for most paper-based platforms.

Pressed Lateral Flow Assay Strips for Flow Delay-Induced Signal Enhancement in Lateral Flow Assay Strips

This paper proposes that the signal intensity of a lateral flow assay (LFA) strip can be increased by pressing the top of the strip, effectively reducing its flow rate. The reduced flow rate allows more time for antigen-antibody interactions to occur, resulting in increased signal intensity and an improved detection limit. To assess the potential of the pressed LFA (pLFA) strip, C-reactive protein (CRP) diluted in phosphate-buffered saline (PBS) and serum is detected, affording signal enhancement and a lowered limit of detection. Additionally, to show that the signal enhancement by pressure-induced flow delay applies to existing LFA products, commercially available COVID-19 antigen test strips are pressed, and signal enhancement is observed. Lastly, we show that the signal intensity of COVID-19 LFA kits can be increased by approximately two-fold at maximum by applying pressure on top of the manufactured product. This study suggests that pressed LFA strips can be used to reduce the chances of determining ambiguous signals as false-negative results and can potentially improve the detection sensitivity.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s13206-022-00085-w.

Emitter-Quencher Pair of Single Atomic Co Sites and Monolayer Titanium Carbide MXenes for Luminol Chemiluminescent Reactions

A facile, one-step doping protocol was adopted to synthesize Co single atomic site catalysts (SASCs) in UiO-66 metal-organic frameworks. In view of highly uniform active sites of Co-O₆ moieties, the SASCs specifically contribute to catalyzing the generation of a large amount of singlet oxygen instead of superoxide or hydroxyl radicals, which endows Co SASCs with a the remarkable enhancement effect (∼3775 times) on luminol chemiluminescent (CL) emission. Interestingly, monolayer titanium carbide MXenes can drastically quench the CL signal of the Co SASC-boosted luminol reaction by ∼94.6% as highly efficient luminescent absorbents. Furthermore, the emitter-quencher pair of Co SASCs and titanium carbide MXenes was successfully adopted to develop an immunoassay method for cardiac troponin I (cTnI) on an immunochromatographic test strip platform. With a sandwich immunoreaction mode, a titanium carbide MXene-labeled cTnI tracer antibody was captured on the test line of a test strip, which significantly inhibited the CL response of the Co SACs-boosted luminol system. The dynamic range for quantitating cTnI is 1.0-100 pg mL^-1, with a detection limit of 0.33 pg mL^-1 (3σ). The test strip was successfully used to detect cTnI in human serum samples collected from cardiopathy patients. This proof-of-principle work manifests both the CL enhancement of SASCs and the quenching behavior of MXenes, which shows the thrilling prospects of combinational usage of the two functionalized nanomaterials for tracking biological recognition events.

Recent advances and challenges of biosensing in point-of-care molecular diagnosis

Molecular diagnosis, which plays a major role in infectious disease screening with successful understanding of the human genome, has attracted more attention because of the outbreak of COVID-19 recently. Since point-of-care testing (POCT) can expand the application of molecular diagnosis with the benefit of rapid reply, low cost, and working in decentralized environments, many researchers and commercial institutions have dedicated tremendous effort and enthusiasm to POCT-based biosensing for molecular diagnosis. In this review, we firstly summarize the state-of-the-art techniques and the construction of biosensing systems for POC molecular diagnosis. Then, the application scenarios of POCT-based biosensing for molecular diagnosis were also reviewed. Finally, several challenges and perspectives of POC biosensing for molecular diagnosis are discussed. This review is expected to help researchers deepen comprehension and make progresses in POCT-based biosensing field for molecular diagnosis applications.

Identification and validation of ferroptosis-associated gene-based on immune score as prognosis markers for hepatocellular carcinoma patients

Background

Ferroptosis has been found to affect the prognosis and immunotherapy of hepatocellular carcinoma (HCC). However, the association between ferroptosis-related genes and infiltrating immune cells in tumor immune microenvironment (TIME) has not been fully elucidated. This study aimed at establishing a prediction model for the progression of HCC using ferroptosis-associated genes based on immune score.

Methods

Transcriptomic, mutation and clinicopathological information were downloaded from TCGA and International Cancer Genome Consortium (ICGC) for this study. Construction of the prediction model was done by Lasso regression analysis. Estimation of the clustering ability of the prediction model was done by t-distributed stochastic neighbor embedding (t-SNE) and principal component analysis (PCA) analyses. Assessment of the accuracy of the prediction model was done by receiver operating characteristic (ROC) and Kaplan-Meier curves.

Results

A prediction model was formulated utilizing three ferroptosis-related genes (G6PD, SAT1 and SLC1A5). The model independently predicted the overall survival (OS). Differentially expressed genes (DEGs) linked to based on Kyoto Encyclopedia of Genes and Genomes (KEGG) and gene ontology (GO) analyses immune-associated pathways and functions. Single-sample gene set enrichment analysis (ssGSEA) strategy further confirmed the model was related to immune-associated functions as well as immune cell infiltration.

Conclusions

The three ferroptosis-associated gene-based prediction model was good at predicting the OS outcomes of HCC, improve HCC prognostication and treatment in the clinic.

Advanced Nanomaterials for Preparedness Against (Re-)Emerging Viral Diseases

While the coronavirus disease (COVID-19) accounts for the current global pandemic, the emergence of other unknown pathogens, named "Disease X," remains a serious concern in the future. Emerging or re-emerging pathogens continue to pose significant challenges to global public health. In response, the scientific community has been urged to create advanced platform technologies to meet the ever-increasing needs presented by these devastating diseases with pandemic potential. This review aims to bring new insights to allow for the application of advanced nanomaterials in future diagnostics, vaccines, and antiviral therapies, thereby addressing the challenges associated with the current preparedness strategies in clinical settings against viruses. The application of nanomaterials has advanced medicine and provided cutting-edge solutions for unmet needs. Herein, an overview of the currently available nanotechnologies is presented, highlighting the significant features that enable them to control infectious diseases, and identifying the challenges that remain to be addressed for the commercial production of nano-based products is presented. Finally, to conclude, the development of a nanomaterial-based system using a "One Health" approach is suggested. This strategy would require a transdisciplinary collaboration and communication between all stakeholders throughout the entire process spanning across research and development, as well as the preclinical, clinical, and manufacturing phases.

Modification of a nitrocellulose membrane with nanofibers for sensitivity enhancement in lateral flow test strips

Lateral-flow analysis (LFA) is a convenient, low-cost, and rapid detection method, which has been widely used for screening of diseases. However, sensitivity enhancement in LFA is still a focus in this field and remains challenging. Herein, we propose an electrospinning coating method to modify the conventional nitrocellulose (NC) membrane and optimize the liquid flow rate for enhancing the sensitivity of the NC based LFA strips in the detection of human chorionic gonadotropin (HCG) and luteinizing hormone (LH). It can be seen that coating the NC membrane with nitrocellulose fibers could obtain a NC based strip with HCG and LH detection limits of 0.22 and 0.36 mIU mL-1 respectively, and a quantitative linear range of 0.5-500 mIU mL-1. The results show that electrospinning is effective in modifying conventional NC membranes for LFA applications.

Dengue Detection: Advances in Diagnostic Tools from Conventional Technology to Point of Care

The dengue virus (DENV) is a vector-borne flavivirus that infects around 390 million individuals each year with 2.5 billion being in danger. Having access to testing is paramount in preventing future infections and receiving adequate treatment. Currently, there are numerous conventional methods for DENV testing, such as NS1 based antigen testing, IgM/IgG antibody testing, and Polymerase Chain Reaction (PCR). In addition, novel methods are emerging that can cut both cost and time. Such methods can be effective in rural and low-income areas throughout the world. In this paper, we discuss the structural evolution of the virus followed by a comprehensive review of current dengue detection strategies and methods that are being developed or commercialized. We also discuss the state of art biosensing technologies, evaluated their performance and outline strategies to address challenges posed by the disease. Further, we outline future guidelines for the improved usage of diagnostic tools during recurrence or future outbreaks of DENV.

Advanced Signal-Amplification Strategies for Paper-Based Analytical Devices: A Comprehensive Review

Paper-based analytical devices (PADs) have emerged as a promising approach to point-of-care (POC) detection applications in biomedical and clinical diagnosis owing to their advantages, including cost-effectiveness, ease of use, and rapid responses as well as for being equipment-free, disposable, and user-friendly. However, the overall sensitivity of PADs still remains weak, posing a challenge for biosensing scientists exploiting them in clinical applications. This review comprehensively summarizes the current applicable potential of PADs, focusing on total signal-amplification strategies that have been applied widely in PADs involving colorimetry, luminescence, surface-enhanced Raman scattering, photoacoustic, photothermal, and photoelectrochemical methods as well as nucleic acid-mediated PAD modifications. The advances in signal-amplification strategies in terms of signal-enhancing principles, sensitivity, and time reactions are discussed in detail to provide an overview of these approaches to using PADs in biosensing applications. Furthermore, a comparison of these methods summarizes the potential for scientists to develop superior PADs. This review serves as a useful inside look at the current progress and prospective directions in using PADs for clinical diagnostics and provides a better source of reference for further investigations, as well as innovations, in the POC diagnostics field.

Paper Microfluidic Device with a Horizontal Motion Valve and a Localized Delay for Automatic Control of a Multistep Assay

A microfluidic paper-based analytical device (μPAD) is a cost-effective platform to implement assays, especially for point-of-care testing. Developing μPADs with fluidic control is important to implement multistep assays and provide high sensitivities. However, current localized delays in μPADs made of sucrose have a limited ability to decrease the flow rate. In addition, existing μPADs for automatic multistep assays are limited by their need for auxiliary instruments, their false activation, or their unavoidable tradeoff between available fluid volumes and temporal differences between steps. Here, a novel μPAD composed of a localized dissolvable delay and a horizontal motion mechanical valve for use as an automatic multistep assay is reported. A mixture of fructose and sucrose was used in the localized dissolvable delay and it provided an effective decrease in the flow rate to ensure adequate sensitivity in an assay. The dissolvable delay effectively doubled the flow time. A mechanical valve using a horizontal movement was developed to automatically implement a multistep process. Two-step and four-step processes were enabled with the μPAD. Cardiac troponin I (cTnI), a gold-standard biomarker for myocardial infarction, was used as a model analyte to show the performance of the developed μPAD in an assay. The designed μPAD, with the simple-to-make localized dissolvable delay and the robust mechanical valve, provides the potential to automatically implement high-performance multistep assays toward a versatile platform for point-of-care diagnostics.

Pathogenic Virus Detection by Optical Nanobiosensors

The novel coronavirus pandemic is sweeping the world and causing global crises. The lack of effective methods of early diagnosis and accurate detection may result in severe infection as well as mortality. Therefore, it is urgently required that rapid, selective, and accurate techniques for detecting pathogenic viruses are developed. Nanotechnology-based biosensors are finding many applications in biological detection, which may address these issues and realize direct detection of molecular targets in real time. Among various nanoplatforms, optical nanobiosensors have aroused much interest due to their inherent advantages of high sensitivity and direct readout. In this review, a summary of recent progress on the optical biosensors based on nanotechnology for pathogenic virus detection is provided, with focus on quantum dots (QDs), upconversion nanoparticles (UCNPs), noble metal nanoparticles, and organic fluorescent molecules-based nanoprobes and chemiluminescence assays. These representative studies demonstrate appealing performance as biosensors and hold great promise for clinical diagnosis.

Aspects of Point-of-Care Diagnostics for Personalized Health Wellness

Advancements in analytical diagnostic systems for point-of-care (POC) application have gained considerable attention because of their rapid operation at the site required to manage severe diseases, even in a personalized manner. The POC diagnostic devices offer easy operation, fast analytical outcome, and affordable cost, which promote their advanced research and versatile adoptability. Keeping advantages in view, considerable efforts are being made to design and develop smart sensing components such as miniaturized transduction, interdigitated electrodes-based sensing chips, selective detection at low level, portable packaging, and sustainable durability to promote POC diagnostics according to the needs of patient care. Such effective diagnostics systems are in demand, which creates the challenge to make them more efficient in every aspect to generate a desired bio-informatic needed for better health access and management. Keeping advantages and scope in view, this mini review focuses on practical scenarios associated with miniaturized analytical diagnostic devices at POC application for targeted disease diagnostics smartly and efficiently. Moreover, advancements in technologies, such as smartphone-based operation, paper-based sensing assays, and lab-on-a-chip (LOC) which made POC more sensitive, informative, and suitable for major infectious disease diagnosis, are the main focus here. Besides, POC diagnostics based on automated patient sample integration with a sensing platform is continuously improving therapeutics interventions against specific infectious disease. This review also discussed challenges associated with state-of-the-art technology along with future research opportunities to design and develop next generation POC diagnostic systems needed to manage infectious diseases in a personalized manner.

Rapid (30-second), equipment-free purification of nucleic acids using easy-to-make dipsticks

The complexity of current nucleic acid isolation methods limits their use outside of the modern laboratory environment. Here, we describe a fast and affordable method to purify nucleic acids from animal, plant, viral and microbial samples using a cellulose-based dipstick. Nucleic acids can be purified by dipping in-house-made dipsticks into just three solutions: the extract (to bind the nucleic acids), a wash buffer (to remove impurities) and the amplification reaction (to elute the nucleic acids). The speed and simplicity of this method make it ideally suited for molecular applications, both within and outside the laboratory, including limited-resource settings such as remote field sites and teaching institutions. Detailed instructions for how to easily manufacture large numbers of dipsticks in house are provided. Using the instructions, readers can create more than 200 dipsticks in <30 min and perform dipstick-based nucleic acid purifications in 30 s.

Advanced "lab-on-a-chip" to detect viruses - Current challenges and future perspectives

Massive viral outbreaks draw attention to viruses that have not been thoroughly studied or understood. In recent decades, microfluidic chips, known as "lab-on-a-chip", appears as a promising tool for the detection of viruses. Here, we review the development of microfluidic chips that could be used in response to viral detection, specifically for viruses involved in more recent outbreaks. The advantages as well as the disadvantages of microfluidic systems are discussed and analyzed. We also propose ideas for future development of these microfluidic chips and we expect this advanced technology to be used in the future for viral outbreaks.

Paper/Soluble Polymer Hybrid-Based Lateral Flow Biosensing Platform for High-Performance Point-of-Care Testing

As a global shift continues to occur in high burden diseases toward developing countries, the importance of medical diagnostics based on point-of-care testing (POCT) is rapidly increasing. However, most diagnostic tests that meet clinical standards rely on high-end analyzers in central hospitals. Here, we report the development of a simple, low-cost, mass-producible, highly sensitive/quantitative, automated, and robust paper/soluble polymer hybrid-based lateral flow biosensing platform, paired with a smartphone-based reader, for high-performance POCT. The testing architecture incorporates a polymeric barrier that programs/automates sequential reactions via a polymer dissolving mechanism. The smartphone-based reader with simple opto-mechanical parts offers a stable framework for accurate quantification. Analytical performance of this platform was evaluated by testing human cardiac troponin I (cTnI), a preferred biomarker for the diagnosis of myocardial infarction, in serum/plasma samples. Coupled with catalytic/colorimetric gold-ion amplification, this platform produced results within 20 min with a detection limit of 0.92 pg mL^-1 and a coefficient of variation <10%, which is equivalent to the performance of a high-sensitivity standard analyzer, and operated within acceptable levels stipulated by clinical guidelines. Moreover, cTnI clinical sample tests indicate a high correlation (r = 0.981) with the contemporary analyzers, demonstrating the clinical utility of this platform in high-performance POCT.

Quantitatively controllable fluid flows with ballpoint-pen-printed patterns for programmable photo-paper-based microfluidic devices

Regulating the fluid flow in microfluidic devices enables a wide range of assay protocols for analytical applications. A programmable, photo-paper-based microfluidic device fabricated by using a method of cutting and laminating, followed by printing, is reported. The flow distance of fluid in the photo-paper-based channel was linearly proportional to time. By printing silver nanoparticle (AgNP) and poly[4,5-difluoro-2,2-bis(trifluoromethyl)-1,3-dioxole-co-tetrafluoroethylene] (PTFE) patterns on the surface of a photo-paper-based channel, we were able to either increase or decrease the fluid flow in the fabricated microfluidic devices, while maintaining the linearity in the flow distance-time relation. In comparison to the speed of fluid flow in a pristine channel, by using hydrophilic AgNP patterns, we were able to increase the speed in the channel by up to 15 times while we were able to slow the speed by a factor of 3 when using hydrophobic PTFE dots. We then further demonstrated a single-step protocol for detecting glucose and a multi-step protocol for detecting methyl paraoxon (MPO) with our methods in photo-paper-based microfluidic devices. This approach can lead to improved fluid handling techniques to achieve a wide range of complex, but programmable, assays without the need for any additional auxiliary devices for automated operation.

Reactive Polymer Targeting dsRNA as Universal Virus Detection Platform with Enhanced Sensitivity

Reactive poly(pentafluorophenyl acrylate) (PPFPA)-grafted surfaces offer a versatile platform to immobilize biomolecules. Here, we utilize PPFPA-grafted surface and double-stranded RNA (dsRNA) recognizing J2 antibody to construct a universal virus detection platform with enhanced sensitivity. PPFPA on silicon substrates is prepared, and surface hydrophilicity is modulated by partial substitution of the pentafluorophenyl units with poly(ethylene glycol). Following dsRNA antibody immobilization, the prepared surfaces can distinguish long dsRNAs from single-stranded RNAs of the same length and short dsRNAs. As long dsRNAs are common byproducts of viral transcription/replication, these surfaces can detect the presence of different kinds of viruses without prior knowledge of their genomic sequences. To increase dsRNA detection sensitivity, a two-step method is devised where the captured dsRNAs are visualized with multiple fluorophore-tagged J2 antibodies. We show that the developed platform can differentiate foreign long dsRNAs from cellular dsRNAs and other biomolecules present in the cell lysate. Moreover, when tested against cells infected with hepatitis A or C viruses, both viruses are successfully detected using a single platform. Our study shows that the developed PPFPA platform immobilized with J2 antibody can serve as a primary diagnostic tool to determine the infection status for a wide range of viruses.

Development of a Flow-Free Automated Colorimetric Detection Assay Integrated with Smartphone for Zika NS1

The Zika virus (ZIKV) is an emerging flavivirus transmitted to humans by Aedes mosquitoes that can potentially cause microcephaly, Guillain–Barré Syndrome, and other birth defects. Effective vaccines for Zika have not yet been developed. There is a necessity to establish an easily deployable, high-throughput, low-cost, and disposable point-of-care (POC) diagnostic platform for ZIKV infections. We report here an automated magnetic actuation platform suitable for a POC microfluidic sandwich enzyme-linked immunosorbent assay (ELISA) using antibody-coated superparamagnetic beads. The smartphone integrated immunoassay is developed for colorimetric detection of ZIKV nonstructural protein 1 (NS1) antigen using disposable chips to accommodate the reactions inside the chip in microliter volumes. An in-house-built magnetic actuator platform automatically moves the magnetic beads through different aqueous phases. The assay requires a total of 9 min to automatically control the post-capture washing, horseradish peroxidase (HRP) conjugated secondary antibody probing, washing again, and, finally, color development. By measuring the saturation intensity of the developed color from the smartphone captured video, the presented assay provides high sensitivity with a detection limit of 62.5 ng/mL in whole plasma. These results advocate a great promise that the platform would be useful for the POC diagnosis of Zika virus infection in patients and can be used in resource-limited settings.

Automated, Universal, and Mass-Producible Paper-Based Lateral Flow Biosensing Platform for High-Performance Point-of-Care Testing

Paper-based lateral flow assays (LFAs) are among the most widely used biosensing platforms for point-of-care testing (POCT). However, the conventional colloidal gold label of LFAs show low sensitivity and limited quantitative capacity. Alternatively, the use of enzyme/chemical reaction-based signal amplification with structural modifications has enhanced analytical capacity but requires multiple user interventions as a trade-off, increasing complexity, test imprecision, and time. These platforms are also difficult to manufacture, limiting their practical applications. In this study, within the current LFA production framework, we developed a highly sensitive, automated, universal, and manufacturable LFA biosensing platform by (i) incorporating gold nanoparticles into a polymer-networked peroxidase with an antibody as a new scheme for enhanced enzyme conjugation and (ii) integrating a mass-producible and time-programmable amplification part based on a water-swellable polymer for automating the sequential reactions in the immunoassay and signal amplification, without compromising performance, simplicity, and production feasibility. We applied this platform to evaluate cardiac troponin I (cTnI), a gold-standard biomarker for myocardial infarction diagnosis. Quantitative analysis of cTnI in clinical setting remains limited to the laboratory-based high-end and costly standard equipment. Coupled with an enzyme-catalyzed chemiluminescence method, this platform enables automated, cost-effective (0.66 USD per test), and high-performance testing of human cTnI in serum samples within 20 min with a detection range of 6 orders of magnitude, detection limit of 0.84 pg mL^-1 (595-fold higher than conventional cTnI-LFA), and a coefficient of variation of 2.9-8.5%, which are comparable to the standard equipment and acceptable for clinical use. Moreover, cTnI analysis results using clinical serum/plasma samples revealed a strong correlation (R² = 0.991) with contemporary standard equipment, demonstrating the practical application of this platform for high-performance POCT.

Programmable Paper-Based Microfluidic Devices for Biomarker Detections

Recent advanced paper-based microfluidic devices provide an alternative technology for the detection of biomarkers by using affordable and portable devices for point-of-care testing (POCT). Programmable paper-based microfluidic devices enable a wide range of biomarker detection with high sensitivity and automation for single- and multi-step assays because they provide better control for manipulating fluid samples. In this review, we examine the advances in programmable microfluidics, i.e., paper-based continuous-flow microfluidic (p-CMF) devices and paper-based digital microfluidic (p-DMF) devices, for biomarker detection. First, we discuss the methods used to fabricate these two types of paper-based microfluidic devices and the strategies for programming fluid delivery and for droplet manipulation. Next, we discuss the use of these programmable paper-based devices for the single- and multi-step detection of biomarkers. Finally, we present the current limitations of paper-based microfluidics for biomarker detection and the outlook for their development.

Lateral and Vertical Flow Assays for Point-of-Care Diagnostics

Lateral flow assays (LFAs) have been the pillar of rapid point-of-care (POC) diagnostics due to their simplicity, rapid process, and low cost. Recent advances in sensitivity, selectivity, and chemical stability enhancement have ensured the foothold of LFAs in commercial POC diagnostics. This paper reviews recent developments in labeling strategies and detection methods of LFAs. Moreover, vertical flow assays (VFAs) have emerged as an alternate paper-based assay due to faster detection time and unique multiplexing capabilities. Smartphones as LFA readers have been transformed into a universal integrated platform for imaging, data processing, and storage, providing quantitative results in low-resource settings. Commercial LFAs and VFAs products are evaluated with regards to their performance, market trends, and regulatory issues. The future outlook of the flow-based assays for POC diagnostics is also discussed.

Sensitivity Enhancement of Nucleic Acid Lateral Flow Assays through a Physical-Chemical Coupling Method: Dissoluble Saline Barriers

Nucleic acid lateral flow assays (NALFAs) have attracted much attention due to their rapid, robust, simple, and cost-effective features. However, the current NALFAs are still limited by low sensitivity because of the poor understanding and control of the underlying complex flow and reaction processes. Although enormous efforts have been devoted to enhancing detection sensitivity of NALFAs, developing simple NALFAs with high sensitivity remains difficult. Thus, we proposed a novel physical-chemical coupling method using dissoluble saline barriers and developed the corresponding mathematical model to better understand the underlying processes to enhance the NALFA sensitivity. Through optimizing the design parameters (e.g., saline barriers patterns, volume, and concentrations) experimentally and numerically, we achieved the highest 10-fold sensitivity enhancement for detection of nucleic acids (including HBV, Staphylococcus aureus, and salmonella as model targets) using this method. The physical-chemical coupling method offers a facile strategy for developing highly sensitive NALFAs.

Dengue virus: a review on advances in detection and trends - from conventional methods to novel biosensors

Dengue virus is an important arbovirus infection which transmitted by the Aedes female mosquitoes. The attempt to control and early detection of this infection is a global public health issue at present. Because of the clinical importance of its detection, the main focus of this review is on all of the methods that can offer the new diagnosis strategies. The advantages and disadvantages of reported methods have been discussed comprehensively from different aspects like biomarkers type, sensitivity, accuracy, rate of detection, possibility of commercialization, availability, limit of detection, linear range, simplicity, mechanism of detection, and ability of usage for clinical applications. The optical, electrochemical, microfluidic, enzyme linked immunosorbent assay (ELISA), and smartphone-based biosensors are the main approaches which developed for detection of different biomarkers and serotypes of Dengue virus. Future efforts in miniaturization of these methods open the horizons for development of commercial biosensors for early-diagnosis of Dengue virus infection. Graphical abstract Transmission of Dengue virus by the biting of an Aedes aegypti mosquito, the symptoms of Dengue hemorrhagic fever and the structure of Dengue virus and application of biosensors for its detection.

Exploring Matrix Effects on Binding Properties and Characterization of Cotinine Molecularly Imprinted Polymer on Paper-Based Scaffold

Commercially available sorbent materials for solid-phase extraction are widely used in analytical laboratories. However, non-selective binding is a major obstacle for sample analysis. To overcome this problem, molecularly imprinted polymers (MIPs) were used as selective adsorbent materials prior to determining target analysts. In this study, the use of non-covalent molecularly imprinted polymers (MIPs) for cotinine adsorption on a paper-based scaffold was studied. Fiberglass paper was used as a paper scaffold for cotinine-selective MIP adsorption with the use of 0.5% agarose gel. The effects of salt, pH, sample matrix, and solvent on the cotinine adsorption and extraction process were investigated. Under optimal conditions, the adsorption isotherm of synthesized MIPs increased to 125.41 µg/g, whereas the maximum adsorption isotherm of non-imprinted polymers (NIPs) was stable at 42.86 µg/g. The ability of the MIP paper scaffold to absorb cotinine in water medium was approximately 1.8–2.8-fold higher than that of the NIP scaffold. From Scatchard analysis, two dissociation constants of MIPs were calculated to be 2.56 and 27.03 µM. Nicotine, myosmine, and N-nitrosonornicotine were used for selectivity testing, and the calculated selectivity factor of cotinine to nicotine, myosmine, and N-nitrosonornicotine was 1.56, 2.69, and 2.05, respectively. Overall, the MIP paper scaffold is promising for simple onsite sampling of cotinine and can be used to assess tobacco smoke exposure.

Visual Detection of Cucumber Green Mottle Mosaic Virus Based on Terminal Deoxynucleotidyl Transferase Coupled with DNAzymes Amplification

A simple, rapid, and sensitive visual detection method for observing cucumber green mottle mosaic virus was reported based on the template-independent polymerization activity of terminal deoxynucleotidyl transferase (TdT), coupled with the cascade amplification of Mg²⁺-dependent DNAzyme and hemin/G-quadruplex DNAzyme. Briefly, the hybridized dsDNA of T1/P1 was cut into two parts at its position of 5′-AA↓CG↑TT-3′ by the restricted enzyme AcII. The longer, newborn fragment originating from P1 was tailed at its 3’-end by oligo dG, and an intact enzymatic sequence of Mg²⁺-dependent DNAzyme was generated. The substrate sequence in the loop segment of the hairpin probe (HP) hybridized with the newborn enzymatic sequence and was cleaved into two parts in the presence of Mg²⁺. The locked G-quadruplex sequence in the stem segment of the HP was released, which catalyzed the oxidation of ABTS^2- in the presence of H₂O₂, and the resulting solution turned green. A correlation between the absorbance and concentration of T1 was obtained in a range from 0.1 pM to 2 nM, with a detection limit of 0.1 pM. In addition to promoting a lower detection limit and shorter monitoring time, this method also demonstrated an excellent selectivity to single or double nucleotide changes. Therefore, the designed strategy provided a rapid and efficient platform for viral inspection and plant protection.

A two-dimensional mathematical model for analyzing the effects of capture probe properties on the performance of lateral flow assays

Lateral flow assays (LFAs) are promising candidates in biomedical diagnosis fields due to their rapid, low-cost, and portable features.

Electrospun Polycaprolactone Nanofibers as a Reaction Membrane for Lateral Flow Assay

Electrospun polycaprolactone (PCL) nanofibers have emerged as a promising material in diverse biomedical applications due to their various favorable features. However, their application in the field of biosensors such as point-of-care lateral flow assays (LFA) has not been investigated. The present study demonstrates the use of electrospun PCL nanofibers as a reaction membrane for LFA. Electrospun PCL nanofibers were treated with NaOH solution for different concentrations and durations to achieve a desirable flow rate and optimum detection sensitivity in nucleic acid-based LFA. It was observed that the concentration of NaOH does not affect the physical properties of nanofibers, including average fiber diameter, average pore size and porosity. However, interestingly, a significant reduction of the water contact angle was observed due to the generation of hydroxyl and carboxyl groups on the nanofibers, which increased their hydrophilicity. The optimally treated nanofibers were able to detect synthetic Zika viral DNA (as a model analyte) sensitively with a detection limit of 0.5 nM. Collectively, the benefits such as low-cost of fabrication, ease of modification, porous nanofibrous structures and tunability of flow rate make PCL nanofibers a versatile alternative to nitrocellulose membrane in LFA applications. This material offers tremendous potential for a broad range of point-of-care applications.

Valve-Enabled Sample Preparation and RNA Amplification in a Coffee Mug for Zika Virus Detection

The recent outbreaks of Zika virus (ZIKV) infection represent a public health challenge. Rapid, cost-effective, and reliable diagnostic tools for ZIKV detection at the point of care (POC) are highly desirable, especially for resource-limited nations. To address the need, we have developed an integrated device to achieve sample-to-answer ZIKV detection. The device features innovative ball-based valves enabling the storage and sequential delivery of reagents for virus lysis and a paper-based unit for RNA enrichment and purification. The paper unit is placed in a commercially available coffee mug that provides a constant temperature for reverse transcription loop-mediated isothermal amplification (RT-LAMP), followed by colorimetric detection by naked eye or a cellphone camera. Using the device, we demonstrated the reproducible detection of ZIKV in human urine and saliva samples.