Plasmonically Enhanced CRISPR/Cas13a-Based Bioassay for Amplification-Free Detection of Cancer-Associated RNA

DNA Tetrahedron-enhanced single-particle counting integrated with cascaded CRISPR Program for ultrasensitive dual RNAs logic sensing

CRISPR-Cas-based technology, emerging as a leading platform for molecular assays, has been extensively researched and applied in bioanalysis. However, achieving simultaneous and highly sensitive detection of multiple nucleic acid targets remains a significant challenge for most current CRISPR-Cas systems. Herein, a CRISPR Cas12a based calibratable single particle counting-mediated biosensor was constructed for dual RNAs logic and ultra-sensitive detection in one tube based on DNA Tetrahedron (DTN)-interface supported fluorescent particle probes coupled with a novel synergistic cascaded strategy between CRISPR Cas13a system and strand displacement amplification (SDA). As expected, our platform enables dual RNA molecules intelligent detection using only one crRNA of Cas13a, achieving a sensitivity enhancement of three orders of magnitude assisted with multiple signal amplification and accurate fluorescence particle counting with DTN mediated nano-biointerface enhancement, compared to traditional bulk Cas13a assays. Moreover, the effectiveness and universality of our strategy are experimentally investigated and demonstrated through the detection of mRNAs (cervical cancer swab clinical samples and cultured cancer cells) and bacterial 16s rRNAs. This work not only proposes a highly promising avenue for designing CRISPR-based multiplex detection systems that excel in ultra-sensitivity, specificity, and clinical molecular diagnostics, but also provide new insights into the potential applications of nanotechnology in molecular diagnostics, functional surface engineering, and interface-mediated bioreactions.

Nanotechnology-leveraged CRISPR/Cas systems: icebreaking in trace cancer-related nucleic acids biosensing

As promising noninvasive biomarkers, nucleic acids provide great potential to innovate cancer early detection methods and promote subsequent diagnosis to improve the survival rates of patient. Accurate, straightforward and sensitive detection of such nucleic acid-based cancer biomarkers in complex biological samples holds significant clinical importance. However, the low abundance creates huge challenges for their routine detection. As the next-generation diagnostic tool, Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)/CRISPR-associated protein (Cas) with their high programmability, sensitivity, fidelity, single-base resolution, and precise nucleic acid positioning capabilities are extremely attractive for trace nucleic acid-based cancer biomarkers (NABCBs), permitting rapid, ultra-sensitive and specific detection. More importantly, by combing with nanotechnology, it can solve the long-lasting problems of poor sensitivity, accuracy and simplicity, as well as to achieve integrated miniaturization and portable point-of-care testing (POCT) detection. However, existing literature lacks specific emphasis on this topic. Thus, we intend to propose a timely one for the readers. This review will bridge this gap by providing insights for CRISPR/Cas-based nano-biosensing development and highlighting the current state-of-art, challenges, and prospects. We expect that it can provide better understanding and valuable insights for trace NABCBs detection, thereby facilitating advancements in early cancer screening/detection/diagnostics and win practical applications in the foreseeable future.

CRISPR-Cas14a and allosteric transcription factors empowered cell-free electrochemical biosensor for highly sensitive and stable detection of progesterone in multiple scenarios

In this study, a cell-free electrochemical assay based on allosteric transcription factors (aTFs) and CRISPR-Cas14a was developed for the detection of progesterone in trace samples. This electrochemical biosensor helps to overcome the drawbacks of the traditional fluorescence assay based on the CRISPR-Cas system and aTFs combined for non-nucleic acid targets that is poorly effective for the detection of colored samples. By comparing and optimizing the concentration and length of the probes in the straight chain and hairpin structure, the sensor performance was improved. In addition, different sgRNA from other studies was designed to overcome the effect of sequence folding in the space region on Cas14a activation. Based on these optimization results, we constructed an electrochemical sensor for progesterone quantification in the range of 66.7pM to 3.33 × 10-1μM. This method requires only 2 μL of sample and does not necessitate complex pretreatment steps, with detection completed within 1.5 h. The method has been successfully applied to food, environmental, and biological samples, with recovery rates between 82.65% and 109%. This suggests that CRISPR and allosteric transcription factor-powered electrochemical detection methods have significant potential for use in the field of small molecule detection under various scenarios.

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.

Label/immobilization-free Cas12a-based electrochemiluminescence biosensor for sensitive DNA detection

Electrochemiluminescence (ECL) is one of the most sensitive techniques in the field of diagnostics. However, they typically require luminescent labeling and electrode surface biological modification, which is a time-consuming and laborious process involving multiple steps and may also lead to low reaction efficiency. Fabricating label/modification-free biosensors has become one of the most attractive parts for simplifying the ECL assays. In this work, the ECL luminophores carbon dots (CDs) were encapsulated in DNA hydrogel in situ by a simple rolling circle amplification (RCA) reaction. Upon binding of the target DNA, active Cas12a induces a collateral cleavage of the hydrogel's ssDNA backbone, resulting in a programmable degradation of the hydrogel and the release of CDs. By directly measuring the released CDs ECL, a simple and rapid label/modification-free detection of the target HPV-16 was realized. It is noted that this method allowed for 0.63 pM HPV-16 DNA detection without any amplification step, and it could take only ∼60 min for a fast test of a human serum sample. These results showed that our label/modification-free ECL biosensor has great potential for use in simple, rapid, and sensitive point-of-care (POC) detection.

Development of a DNAzyme-Driven Fluorescent Light-Up Aptasensor for Label-Free Detection of Multiple lncRNAs

Long noncoding RNAs (lncRNAs) act as the dynamic regulatory molecules that control the expression of genes and affect numerous biological processes, and their dysregulation is associated with tumor progression. Herein, we develop a fluorescent light-up aptasensor to simultaneously measure multiple lncRNAs in living cells and breast tissue samples based on the DNAzyme-mediated cleavage reaction and transcription-driven synthesis of light-up aptamers. When target lncRNAs are present, they can be recognized by template probes to form the active DNAzyme structures, initiating the T4 PNK-catalyzed dephosphorylation-triggered extension reaction to generate double-strand DNAs with the T7 promoter sequences. The corresponding T7 promoters can initiate the transcription amplification catalyzed by the T7 RNA polymerase to generate abundant Broccoli aptamers and malachite green aptamers, which can bind DFHBI-1T and MG to generate strong fluorescence signals. Taking advantage of the good selectivity of DNAzyme-mediated cleavage of lncRNAs, high amplification efficiency of T7 transcription-driven amplification reaction, and bright fluorescence of the RNA aptamer-fluorophore complex, this method exhibits high sensitivity with a detection limit of 21.4 aM for lncRNA HOTAIR and 18.47 aM for lncRNA MALAT1, and it can accurately measure multiple lncRNAs in both tumor cell lines and breast tissue samples, providing a powerful paradigm for biomedical research and early clinic diagnostics.

High-Performance Detection of Mycobacterium bovis in Milk Using Recombinase-Aided Amplification-Clustered Regularly Interspaced Short Palindromic Repeat-Cas13a-Lateral Flow Detection

Mycobacterium bovis (M. bovis), the microorganism responsible for bovine tuberculosis (bTB), is transferred to people by the ingestion of unpasteurized milk and unprocessed fermented milk products obtained from animals with the infection. The identification of M. bovis in milk samples is of the utmost importance to successfully prevent zoonotic diseases and maintain food safety. This study presents a comprehensive description of a highly efficient molecular test utilizing recombinase-aided amplification (RPA)-clustered regularly interspaced short palindromic repeat (CRISPR)-associated protein (Cas) 13a-lateral flow detection (LFD) for M. bovis detection. In contrast to ELISA, RPA-CRISPR-Cas13a-LFD exhibited greater accuracy and sensitivity in the detection of M. bovis in milk, presenting a detection limit of 2 × 100 copies/μL within a 2 h time frame. The two tests exhibited a moderate level of agreement, as shown by a kappa value of 0.452 (95%CI: 0.287-0.617, p < 0.001). RPA-CRISPR-Cas13a-LFD holds significant potential as a robust platform for pathogen detection in complex samples, thereby enabling the more dependable regulation of food safety examination, epidemiology research, and medical diagnosis.

Detection of Nucleic Acids of the Fish Pathogen Yersinia ruckeri from Planktonic and Biofilm Samples with a CRISPR/Cas13a-Based Assay

Yersinia ruckeri is the cause of hemorrhagic septicemia, known as enteric redmouth disease, in salmonid fish species. This bacterial pathogen can form biofilms on abiotic surfaces of aquaculture settings or even on the surfaces of the fish themselves, contributing to their persistence in the aquatic environment. Detection methods for this and other fish pathogens can be time-consuming and lack specificity and sensitivity, limiting timely monitoring, the treatment of microbial infections, and effective control of their transmission in aquaculture settings. Rapid and sensitive detection methods for nucleic acids can be crucial for an appropriate surveillance of bacterial pathogens, and the CRISPR/Cas-based assays have emerged as a good alternative since it has been proven to be a useful tool for the rapid, specific, and sensitive detection of viruses and some bacteria. In this study, we explored the capability of the CRISPR/Cas13a system (SHERLOCK) to specifically detect both DNA and RNA (gene transcripts) from planktonic and biofilm samples of the bacterial fish pathogen Y. ruckeri. The assay was designed to detect the gyrA gene and the small noncoding RNAs (sRNAs) MicA and RprA from planktonic cultures and biofilm samples prepared in marine broth. The specific crRNA designed for these gene targets included a 28 nt specific gene sequence, and a scaffold sequence necessary for Cas13-binding. For all the assays, the nucleic acids obtained from samples were previously subjected to isothermal amplification with the recombinase polymerase amplification (RPA) method and the subsequent T7 transcription of the RPA amplicons. Finally, the detection of nucleic acids of Y. ruckeri was by means of a reporter signal released by the Cas13a collateral RNA cleavage triggered upon target recognition, measured by fluorescence- or lateral-flow-based readouts. This CRISPR/Cas13a-based assay was able to specifically detect both DNA and sRNAs from the Y. ruckeri samples, and the sensitivity was comparable to that obtained with qPCR analysis, highlighting the potential applicability of this CRISPR/Cas13a-based assay for fish pathogen surveillance.

High-sensitive and rapid electrochemical detection of miRNA-31 in saliva using Cas12a-based 3D nano-harvester with improved trans-cleavage efficiency

Salivary miRNA-31 is a reliable diagnostic marker for early-stage oral squamous cell carcinoma (OSCC), but accurate detection of miRNA-31 in saliva samples is a challenge because of its low level and high sequence homology. The CRISPR/Cas12a system has the exceptional potential to enable simple nucleic acid analysis but suffers from low speed and sensitivity. To achieve rapid and high-sensitive detection of miRNA-31 using the CRISPR/Cas12a system, a Cas12a-based nano-harvester activated by a polymerase-driven DNA walker, named as dual 3D nanorobots, was developed. The target walked rapidly on the surface of DNA hairpin-modified magnetic nanoparticles driven by DNA polymerase, generating numerous double-strand DNA (dsDNA). Then, the Cas12a bound to the generated dsDNA for activating its trans-cleavage activity, forming 3D nano-harvester. Subsequently, the harvester cut and released methylene blue-labeled DNA hairpins immobilized on the sensing interface, leading to the change in electrochemical signal. We found that the trans-cleavage activity of the harvester was higher than the conventional CRISPR/Cas12a system. The developed dual 3D nanorobots could enable rapid (detection time within 60 min), high-sensitive (detection limit of femtomolar), and specific analysis of miRNA-31 in saliva samples. Thus, our established electrochemical biosensing strategy has great potential for early diagnosis of OSCC.

CRISPR/Cas-Powered Amplification-Free Detection of Nucleic Acids: Current State of the Art, Challenges, and Futuristic Perspectives

CRISPR/Cas system is becoming an increasingly influential technology that has been repositioned in nucleic acid detection. A preamplification step is usually required to improve the sensitivity of CRISPR/Cas-based detection. The striking biological features of CRISPR/Cas, including programmability, high sensitivity and sequence specificity, and single-base resolution. More strikingly, the target-activated trans-cleavage could act as a biocatalytic signal transductor and amplifier, thereby empowering it to potentially perform nucleic acid detection without a preamplification step. The reports of such work are on the rise, which is not only scientifically significant but also promising for futuristic end-user applications. This review started with the introduction of the detection methods of nucleic acids and the CRISPR/Cas-based diagnostics (CRISPR-Dx). Next, we objectively discussed the pros and cons of preamplification steps for CRISPR-Dx. We then illustrated and highlighted the recently developed strategies for CRISPR/Cas-powered amplification-free detection that can be realized through the uses of ultralocalized reactors, cascade reactions, ultrasensitive detection systems, or others. Lastly, the challenges and futuristic perspectives were proposed. It can be expected that this work not only makes the researchers better understand the current strategies for this emerging field, but also provides insight for designing novel CRISPR-Dx without a preamplification step to win practicable use in the near future.

A Plasmonic Fluor-Lightened Microneedle Array Enables Ultrasensitive Multitarget Whole Blood Diagnosis of Anemia in A Paper Origami-Based Device

This work reports a portable, origami-type paper device with a plasmonic fluor-labeled microneedle sensing module for the multiplexed quantification of anemia biomarkers in whole blood. Sequential steps, including serum separation, target enrichment, and multiplexed readout by a gel imager, are rapidly accomplished with the flexible and highly integrated device. The microneedle array enabled efficient sampling of trace targets from ng mL^-1 to pg mL^-1 level. Combined with the plasmonic fluor label, the signal is improved by ≈7.6 folds compared with the flat substrate-based assay. The device is applied to simultaneously quantify hemoglobin (Hb), ferritin, folic acid (FA), and vitamin B₁₂ (VB₁₂ ), which are four anemia biomarkers distributed in different environments with different concentration ranges. Featured by the small sample volume (150 µL), short assay time (20 min), low cost (2 $), robust stability, and user-friendliness, the device is promising for the rapid and accurate diagnosis of anemia in real practice.

PddCas: A Polydisperse Droplet Digital CRISPR/Cas-Based Assay for the Rapid and Ultrasensitive Amplification-Free Detection of Viral DNA/RNA

Clustered regularly interspaced short palindromic repeats (CRISPR)-based assays have been an emerging diagnostic technology for pathogen diagnosis. In this work, we developed a polydisperse droplet digital CRISPR-Cas-based assay (PddCas) for the rapid and ultrasensitive amplification-free detection of viral DNA/RNA with minimum instruments. LbaCas12a and LbuCas13a were used for the direct detection of viral DNA and RNA, respectively. The reaction mixtures were partitioned with a common vortex mixer to generate picoliter-scale polydisperse droplets in several seconds. The limit of detection (LoD) for the target DNA and RNA is approximately 100 aM and 10 aM, respectively, which is about 3 × 10⁴-10⁵ fold more sensitive than corresponding bulk CRISPR assays. We applied the PddCas to successfully detect severe acute respiratory syndrome coronavirus (SARS-CoV-2) and human papillomavirus type 18 (HPV 18) in clinical samples. For the 23 HPV 18-suspected cervical epithelial cell samples and 32 nasopharyngeal swabs for SARS-CoV-2, 100% sensitivity and 100% specificity were demonstrated. The dual-gene virus detection with PddCas was also established and verified. Therefore, PddCas has potential for point-of-care application and is envisioned to be readily deployed for frequent testing as part of an integrated public health surveillance program.

Amplification-free CRISPR/Cas detection technology: challenges, strategies, and perspectives

Rapid and accurate molecular diagnosis is a prerequisite for precision medicine, food safety, and environmental monitoring. The clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas)-based detection, as a cutting-edged technique, has become an immensely effective tool for molecular diagnosis because of its outstanding advantages including attomolar level sensitivity, sequence-targeted single-base specificity, and rapid turnover time. However, the CRISPR/Cas-based detection methods typically require a pre-amplification step to elevate the concentration of the analyte, which may produce non-specific amplicons, prolong the detection time, and raise the risk of carryover contamination. Hence, various strategies for target amplification-free CRISPR/Cas-based detection have been developed, aiming to minimize the sensitivity loss due to lack of pre-amplification, enable detection for non-nucleic acid targets, and facilitate integration in portable devices. In this review, the current status and challenges of target amplification-free CRISPR/Cas-based detection are first summarized, followed by highlighting the four main strategies to promote the performance of target amplification-free CRISPR/Cas-based technology. Furthermore, we discuss future perspectives that will contribute to developing more efficient amplification-free CRISPR/Cas detection systems.

CRISPR-Cas13a system: A novel tool for molecular diagnostics

The clustered regularly interspaced short palindromic repeats (CRISPR) system is a natural adaptive immune system of prokaryotes. The CRISPR-Cas system is currently divided into two classes and six types: types I, III, and IV in class 1 systems and types II, V, and VI in class 2 systems. Among the CRISPR-Cas type VI systems, the CRISPR/Cas13a system has been the most widely characterized for its application in molecular diagnostics, gene therapy, gene editing, and RNA imaging. Moreover, because of the trans-cleavage activity of Cas13a and the high specificity of its CRISPR RNA, the CRISPR/Cas13a system has enormous potential in the field of molecular diagnostics. Herein, we summarize the applications of the CRISPR/Cas13a system in the detection of pathogens, including viruses, bacteria, parasites, chlamydia, and fungus; biomarkers, such as microRNAs, lncRNAs, and circRNAs; and some non-nucleic acid targets, including proteins, ions, and methyl groups. Meanwhile, we highlight the working principles of some novel Cas13a-based detection methods, including the Specific High-Sensitivity Enzymatic Reporter UnLOCKing (SHERLOCK) and its improved versions, Cas13a-based nucleic acid amplification-free biosensors, and Cas13a-based biosensors for non-nucleic acid target detection. Finally, we focus on some issues that need to be solved and the development prospects of the CRISPR/Cas13a system.

High-resolution imaging of protein secretion at the single-cell level using plasmon-enhanced FluoroDOT assay

Secreted proteins mediate essential physiological processes. With conventional assays, it is challenging to map the spatial distribution of proteins secreted by single cells, to study cell-to-cell heterogeneity in secretion, or to detect proteins of low abundance or incipient secretion. Here, we introduce the "FluoroDOT assay," which uses an ultrabright nanoparticle plasmonic-fluor that enables high-resolution imaging of protein secretion. We find that plasmonic-fluors are 16,000-fold brighter, with nearly 30-fold higher signal-to-noise compared with conventional fluorescence labels. We demonstrate high-resolution imaging of different secreted cytokines in the single-plexed and spectrally multiplexed FluoroDOT assay that revealed cellular heterogeneity in secretion of multiple proteins simultaneously. Using diverse biochemical stimuli, including Mycobacterium tuberculosis infection, and a variety of immune cells such as macrophages, dendritic cells (DCs), and DC-T cell co-culture, we demonstrate that the assay is versatile, facile, and widely adaptable for enhancing biological understanding of spatial and temporal dynamics of single-cell secretome.