Janus particle synthesis and assembly

Numerical Simulations of Colloidal Dimer Assembly into Chiral Clusters and Crystals under Combined Electric and Magnetic Fields

The directed assembly of colloidal particles into ordered structures is crucial for developing advanced functional materials. In this study, we perform Brownian dynamics simulations to investigate the active assembly of self-propelling dimers under orthogonally applied electric and magnetic fields. We systematically explore the effects of dimer geometry, electrohydrodynamic interactions, and field strengths on the formation of chiral clusters and their hierarchical assemblies. By tuning these parameters, we can achieve precise control over cluster size and chirality, providing a method for assembling monodisperse chiral clusters with defined handedness. Furthermore, we utilize the assembled clusters to construct hierarchical structures and chiral colloidal crystals, where global chirality emerges from local packing arrangements, even when individual clusters are achiral. This ability to dynamically manipulate chiral structures using external fields presents a promising route toward designing programmable colloidal architectures, with potential applications in optical metamaterials, microrobotics, and reconfigurable soft matter systems.

A novel dilution strategy for tuning Janus particle morphology

Morphology plays a critical role in determining the properties of colloidal particles. To better understand the morphological evolution of Janus particles formed via seeded emulsion polymerization, we constructed a phase diagram based on the seed-to-monomer ratio and cross-linking density. We found that systematically diluting swollen seed particles before polymerization induces distinct morphological transitions. Quantitative analysis of monomer uptake in seed particles revealed that these transitions are primarily driven by monomer diffusion during dilution. Computational simulations supported our experimental findings, demonstrating a sphere-to-dumbbell transition as seed cross-linking density increased. Simulations also captured changes in the interfacial curvature between the seed and monomer lobes, which were further validated through particle etching experiments. Using this new dilution strategy, we successfully synthesized amphiphilic Janus particles with fluorinated monomers. When combined with homogeneous binder particles, these Janus particles formed stratified coatings that significantly improved water resistance. Notably, the water contact angle remained stable even after repeated solvent rinsing and mechanical abrasion. This dilution approach provides a simple yet effective method for controlling Janus particle morphology and optimizing their functional properties.

Unilateral antibacterial Janus hydrogel hemostatic dressing prepared by the dragging effect of a brush

Hemostasis and subsequent anti-inflammatory measures are essential for wound healing in the human body following trauma or surgical procedures. Here, we try to use the dragging effect of a brush to prepare a Janus hydrogel with the least amount of bacteriostatic agent. The synthesized suspension of polyvinylbenzene-silica@quaternary ammonium salt (PDVB-SiO2@NR4+) Janus particles (JNPs) was selected as ink and brush coated onto one side of a polyacrylic acid (PAA) hydrogel, resulting in Janus hydrogel (JNPs≌PAA). The anisotropic chemical composition, wetting properties, adhesion capabilities, and the obtained hemostatic performance of the Janus hydrogel were studied thoroughly. The hydrophilic PAA side promoted tissue adhesion, while the hydrophobic JNPs side exhibited antibacterial effects. The Janus hydrogel presented perfect hemostatic effect in vivo, owing to the procoagulant effect of the adhesive layer, negative charges, and blood-blocking properties of the hydrophobic layer. The presence of quaternary ammonium groups in the Janus hydrogel imparted strong antibacterial activity against E. coli and S. aureus. Furthermore, the Janus hydrogel showed a low hemolysis rate and high cell safety. This multifunctional hydrogel material holds great promise for wound treatment and expands the applications of hydrogel materials in the biomedical field.

Magnetic Janus Particles: Synthesis and Multifunctional Applications

Magnetic Janus particles (MJPs) with compositional compartmentalization and strong magnetic responsiveness play a pivotal role in various application fields, such as biotechnology, medicine, and materials science. However, comprehensive reviews of the field of MJPs remain limited. Here, this article attempts to fill the gap by reviewing the current common synthetic strategies for MJPs, including masking, microfluidics, self-assembly, phase separation, and seeded emulsion polymerization, among others. It then covers the multifunctional applications of MJPs, beneficial from their magnetic properties and anisotropic topological structure, primarily involving environmental remediation, biomedicine, smart displays, interfacial catalysis, emulsion stabilization, and structured liquid materials are presented, as well. Finally, the current challenges and future perspectives for MJPs are also discussed, aiming to fully harness the potential for broader applications.

Beyond Surfactants: Janus Particles for Functional Interfaces and Coatings

Janus particles (JPs), initially introduced as soft matter, have evolved into a distinctive class of materials that set them apart from traditional surfactants, dispersants, and block copolymers. This mini-review examines the similarities and differences between JPs and their molecular counterparts to elucidate the unique properties of JPs. Key studies on the assembly behavior of JPs in bulk phases and at interfaces are reviewed, highlighting their unique ability to form diverse, complex structures. The superior interfacial stability and tunable amphiphilicity of JPs make them highly effective emulsifiers and dispersants, particularly in emulsion polymerization systems. Beyond these applications, JPs demonstrate immense potential as coating materials, facilitating the development of eco-friendly, anti-icing, and antifouling coatings. A comparative discussion with zwitterionic polymers also highlights the distinctive advantages of each system. This review emphasizes that while JPs mimic some of the behaviors of small molecular surfactants, they also open doors to entirely new applications, making them indispensable as next-generation functional materials.

Two sides of the coin: synthesis and applications of Janus particles

Named after the two-faced Roman god, Janus particles (JPs) are defined by their distinct dual chemical compositions on a single particle. Research on micron-sized JPs has yielded remarkable insights, showcasing their unique assembly behaviors both in bulk and at interfaces. However, significant challenges persist, particularly in the synthesis of smaller (<500 nm) JPs, which remains complex and difficult to scale up. To date, there has been no commercial success with JPs. Recently, seeded synthesis methods, such as emulsion polymerization that is already employed in industrial-scale manufacturing, have shown great promise. These methods enable the production of high-quality JPs with different sizes, morphologies, and functionalities. This advancement has inspired more efforts in exploring JP applications across various fields, including emulsion stabilization, drug delivery, electronic devices, and coatings. This review provides a comprehensive overview of the recent progress in the synthesis and application of polymeric JPs, with an emphasis on the seeded synthesis approach. It discusses the underlying reaction mechanisms and explores different strategies for controlling JP morphology. Serving as a roadmap, this review aims to guide the design of novel functional JPs and their potential future applications. The successful implementation of JPs will require careful consideration and a deep understanding of both synthesis and applications, as these are indeed two sides of the same coin.

Dual-Redox Responsive Interfaces Based on Donor-Acceptor Interactions

Nanoparticle surfactant (NPS) is a highly competitive means for stabilizing liquid-liquid interfaces, endowing interfacial assemblies with functionalities, and enabling the construction of all-liquid devices. Integrating different types of supramolecular interactions into NPSs would open possibilities to generate interfaces that are responsive to multiple stimuli. Here, by using donor-acceptor interactions between polydopamine nanoparticles (PDA NPs) and methyl viologen (MV2+) terminated polystyrene, the formation, assembly, and jamming of a supramolecular NPS at the water-toluene interface is demonstrated. Harnessing the redox properties of both catechol and MV2+, the dual-redox responsiveness can be achieved, allowing the reconfiguration of NPS-based structured liquids. Using NPS as an emulsifier, oil-in-water (O/W), water-in-oil (W/O), and oil-in-water-in-oil (O/W/O) Pickering emulsions can be obtained in one step, which exhibit smart responsiveness to redox reagents. Taking advantage of the adsorption capacity of PDA NPs, the purification of dye-polluted water can be achieved through O/W Pickering emulsions. We envision that this unique dual-redox responsive biphasic system would hold great potential for developing sophisticated controlled-release systems as well as other intelligent, functional materials.

Efficient Aerial Water Harvesting with Self-Sensing Dynamic Janus Crystals

Water scarcity is one of the most pressing issues of contemporary societal development that requires innovative technologies where the material not only harvests water but also plays an active role in the process. Here, we demonstrate a highly efficient optical self-sensing approach to humidity capture from the air, where both humidity-harvesting and water-transduction functionalities are imparted on slender organic crystals by partial silanization via layer-by-layer hybridization. We report that due to the integration of the harvesting of aerial moisture and the collection of the condensed water, the ensuing Janus-type crystals capture humidity with the highest-to-date water collection efficiency of 15.96 ± 0.63 g cm-2 h-1. The water-collecting elements are also capable of delivering the water by reversible and periodic elastic deformation, and their high optical transparency allows real-time monitoring of the periodic fog collection process by deformational modulation of passively or actively transduced light that outcouples at the crystal-droplet interface. The results could inspire sophisticated approaches to humidity harvesting where optically transparent crystals combine fog capture with self-sensing capabilities for continuous and optimized operation to maximize the cost-gain balance of aerial fog capture.

Metal-Organic Frameworks (MOFs): Classification, Synthesis, Modification, and Biomedical Applications

Metal-organic frameworks (MOFs) are a new variety of solid crystalline porous functional materials. As an extension of inorganic porous materials, it has made important progress in preparation and application. MOFs are widely used in various fields such as gas adsorption storage, drug delivery, sensing, and biological imaging due to their high specific surface area, porosity, adjustable pore size, abundant active sites, and functional modification by introducing groups. In this paper, the types of MOFs are classified, and the synthesis methods and functional modification mechanisms of MOFs materials are summarized. Finally, the application prospects and challenges of metal-organic framework materials in the biomedical field are discussed, hoping to promote their application in multidisciplinary fields.

Influence of Sodium Ions and Carbon Black on the Formation and Structural Color of Photonic Balls by Silica Particles

In this study, photonic balls─spherical aggregates of submicrometer-sized silica particles with uniform particle size─were investigated as structural colored materials. The structural color of these photonic balls is influenced by the ordered arrangement of the silica particles. The research focused on how the addition of electrolytes, specifically NaCl, affects the formation of photonic balls to achieve the desired structural color. Without NaCl, the photonic balls formed onion-shaped colloidal crystals. At NaCl concentrations above 0.006 mol/L, the particles aggregated into short-range ordered structures. When the concentration exceeded 0.05 mol/L, the aggregates lost their spherical shape. The study also explored the addition of carbon black (CB), a water-dispersible material due to its surface charge. The findings revealed that NaCl induced the phase separation between the charged silica particles and CB, resulting in Janus-shaped photonic balls─one side exhibiting structural color and the other side appearing black due to the presence of CB. Changing the silica particle size altered the hues of these Janus-shaped photonic balls, though they appeared uniformly colored to the naked eye. While this study did not specifically examine the applications of Janus-shaped photonic balls composed of silica particles and CB, CB is known for its ability to absorb near-infrared radiation and convert it into heat as well as its conductive properties. Silica, on the other hand, has a low thermal conductivity and acts as an electrical insulator. The structurally colored Janus-shaped photonic balls created in this study may serve as pigments in applications requiring anisotropic heat generation and electrical conduction. Additionally, the study's findings suggest the potential for creating various types of Janus-shaped photonic balls from materials with differing densities.

Novel Orange-Emitting YPO4:Sm3+/Polymer Nanocomposite Phosphor Films for LED Applications

A polymer based nanocomposite (NC) material embedded with highly luminescent nanopowders could be promising for replacing traditional luminescent materials from a technological point of view. In this study, we have successfully obtained YPO4: Sm3+ /Polymer nanocomposite phosphor films by embedding YPO4: Sm3+ luminescent nanoparticles (NPs) for orange-light emitting diode (LED) applications. These luminescent NPs were synthesized using the sol gel method in different polymer matrices i.e. polystyrene (PS) and poly (methyl methacrylate) (PMMA) by using direct solution mixing. The structural, morphological, and photoluminescence characteristics of the nano-phosphors and resulting NC films were examined and discussed. The emission spectra of YPO4: Sm3+ (x at.%) nano-phosphors under near-UV excitation at 404 nm were dominated by orange emission attributed to 6H5/2 →   4F7/2 (601 nm) luminescence of Sm3+ ions. The optimum doping concentration of activator Sm3+ in YPO4 matrix was found to be 5 at.%. When the doping concentration of Sm3+ was higher than 5 at.%, concentration quenching occurred. The incorporation of YPO4: Sm3+ NPs into polymer matrices indicated that the NCs retained the original luminescence properties of the luminescent NPs, although a decrease in their emission intensity was observed for the NC films, attributable to a polymer matrix effect, which dominated in PS matrix. The fluorescence decay times of NPs in the NC films were measured and compared to those of proper YPO4: Sm3+ nano-phosphors. A decrease in decay time in NC film was observed due the effective refractive index effect. Temperature-dependent photoluminescence (TDPL) of PMMA NC film was studied in 100-400 K range, investigating the thermal stability of the film. Additionally, CIE coordinates confirmed the red-orange light emission of the prepared phosphors and NC films. The obtained results indicate that the synthesized polymer-nanophosphor NC films are promising candidates for orange-LED applications.

Machine learning assisted sorting of active microswimmers

Active matter systems, being in a non-equilibrium state, exhibit complex behaviors, such as self-organization, giving rise to emergent phenomena. There are many examples of active particles with biological origins, including bacteria and spermatozoa, or with artificial origins, such as self-propelled swimmers and Janus particles. The ability to manipulate active particles is vital for their effective application, e.g., separating motile spermatozoa from nonmotile and dead ones, to increase fertilization chance. In this study, we proposed a mechanism-an apparatus-to sort and demix active particles based on their motility values (Péclet number). Initially, using Brownian simulations, we demonstrated the feasibility of sorting self-propelled particles. Following this, we employed machine learning methods, supplemented with data from comprehensive simulations that we conducted for this study, to model the complex behavior of active particles. This enabled us to sort them based on their Péclet number. Finally, we evaluated the performance of the developed models and showed their effectiveness in demixing and sorting the active particles. Our findings can find applications in various fields, including physics, biology, and biomedical science, where the sorting and manipulation of active particles play a pivotal role.

Amphiphilic Janus Particles for Aerobic Alcohol Oxidation in Oil Foams

Amphiphilic Janus silica particles, tunable with oleophobic-oleophilic properties and low fluorine content (8 wt % F), exhibited prominent foamability for a variety of aromatic alcohols at low particle concentrations (<1 wt %) compared to randomly functionalized silica particles. When selectively loaded with Pd nanoparticles on the oleophilic hemisphere, the particles displayed more than a 2-fold increase in catalytic activity for the aerobic oxidation of benzyl alcohol compared to nonfoam bulk catalysis under ambient O2 pressure. The particles were conveniently recycled with high foamability and catalytic activity maintained for at least five consecutive runs.

Ultrafine Asymmetric Soft/Stiff Nanohybrids with Tunable Patchiness via a Dynamic Surface-Mediated Assembly

Asymmetric soft-stiff patch nanohybrids with small size, spatially separated organics and inorganics, controllable configuration, and appealing functionality are important in applications, while the synthesis remains a great challenge. Herein, based on polymeric single micelles (the smallest assembly subunit of mesoporous materials), we report a dynamic surface-mediated anisotropic assembly approach to fabricate a new type of small asymmetric organic/inorganic patch nanohybrid for the first time. The size of this asymmetric organic/inorganic nanohybrid is ∼20 nm, which contains dual distinct subunits of a soft organic PS-PVP-PEO single micelle nanosphere (12 nm in size and 632 MPa in Young' modulus) and stiff inorganic SiO2 nanobulge (∼8 nm, 2275 MPa). Moreover, the number of SiO2 nanobulges anchored on each micelle can be quantitatively controlled (from 1 to 6) by dynamically tuning the density (fluffy or dense state) of the surface cap organic groups. This small asymmetric patch nanohybrid also exhibits a dramatically enhanced uptake level of which the total amount of intracellular endocytosis is about three times higher than that of the conventional nanohybrids.

Evolution Kinetics of Stabilizing Pickering Emulsion by Brush-Modified Janus Particles: DPD Simulation and Experimental Insights

In the present study, we report the evolution of stabilizing Pickering emulsions using brush-modified Janus particles (JPs), utilizing the dissipative particle dynamics (DPD) simulation technique. Our results are subsequently corroborated with experimental findings. Each JP has one-half of the hydrophobic surface, with the other half embedded with hydrophilic polymer brushes grown via atom transfer radical polymerization (ATRP). Our generic simulation model analyzes the chemical kinetics of polymer brush growth on one-half of the initiator-embedded microparticle (MP) surface, resulting in the formation of JP. This involves evaluating monomer conversion and reaction rates. Our results exhibit a substantial influence of the number of JPs, grafted brush density, and brush length on oil-in-water emulsion stability. We studied the evolution kinetics and stability of emulsion formation by analyzing the growth of average domain size and corresponding scaling functions up to a late time limit. This study aims to clarify the connection between the size, quantity, and functionality of JPs and the stability of Pickering emulsions.

Controlled Surface Textures of Elastomeric Polyurethane Janus Particles: A Comprehensive Review

Colloidal particle research has witnessed significant advancements in the past century, resulting in a plethora of studies, novel applications, and beneficial products. This review article presents a cost-effective and low-tech method for producing Janus elastomeric particles of varied geometries, including planar films, spherical particles, and cylindrical fibers, utilizing a single elastomeric material and easily accessible chemicals. Different surface textures are attained through strain application or solvent-induced swelling, featuring well-defined wavelengths ranging from sub-microns to millimeters and offering easy adjustability. Such versatility renders these particles potentially invaluable for medical applications, especially in bacterial adhesion studies. The coexistence of "young" regions (smooth, with a small surface area) and "old" regions (wrinkled, with a large surface area) within the same material opens up avenues for biomimetic materials endowed with additional functionalities; for example, a Janus micromanipulator where micro- or nano-sized objects are grasped and transported by an array of wrinkled particles, facilitating precise release at designated locations through wrinkle pattern adjustments. This article underscores the versatility and potential applications of Janus elastomeric particles while highlighting the intriguing prospects of biomimetic materials with controlled surface textures.

Insights into emulsion synthesis of self-assembled suprastructures formed by Janus silica particles with -NH2/-SH surface groups

Spherical particles with tunable anisotropic structures enabled by multiple surface functionalities have garnered interest for their potential applications in adsorption technologies. The presence of diverse functional groups in the surface layer, exhibiting varying acidity and hydrophilicity, can lead to unique characteristics in terms of surface structure and behaviour. In this study, the particles were synthesised using a two-step approach involving surface functionalisation of previously synthesised SiO2 Stöber particles. This was achieved by employing 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-aminopropyltrimethoxysilane (APTMS) in a toluene-in-water emulsion. The resulting particles were found to be nonporous, with a specific surface area of 8 m2 g-1. Their sizes were determined to be up to 350 nm through photon cross-correlation spectroscopy. Moreover, the particles exhibited a high net content of functional groups (both amino and mercapto) of 2 mmol g-1. The organisation of the particles during synthesis was observed through SEM images, providing insights into their structural characteristics. Additionally, the study of Eu(iii), Au(iii), and Ag(i) ions and fluorescein adsorption demonstrated varying interactions on the surface, highlighting the potential applications and versatility of these functionalised particles.

Self-Assembly Pathways of Triblock Janus Particles into 3D Open Lattices

The self-assembly of triblock Janus particles is simulated from a fluid to 3D open lattices: pyrochlore, perovskite, and diamond. The coarse-grained model explicitly takes into account the chemical details of the Janus particles (attractive patches at the poles and repulsion around the equator) and it contains explicit solvent particles. Hydrodynamic interactions are accounted for by dissipative particle dynamics. The relative stability of the crystals depends on the patch width. Narrow, intermediate, and wide patches stabilize the pyrochlore-, the perovskite-, and the diamond-lattice, respectively. The nucleation of all three lattices follows a two-step mechanism: the particles first agglomerate into a compact and disordered liquid cluster, which does not crystallize until it has grown to a threshold size. Second, the particles reorient inside this cluster to form crystalline nuclei. The free-energy barriers for the nucleation of pyrochlore and perovskite are ≈10 kBT, which are close to the nucleation barriers of previously studied 2D kagome lattices. The barrier height for the nucleation of diamond, however, is much larger (>20 kBT), as the symmetry of the triblock Janus particles is not perfect for a diamond structure. The large barrier is associated with the reorientation of particles, i.e., the second step of the nucleation mechanism.

Synthesis of Anisotropic Magnetic Polymeric Janus Particles by In Situ Separation of Magnetic Nanoparticles in a Microfluidic Device

Magnetic Janus particles have been studied extensively for medical and biological applications owing to their controllable mobility in fluid media. In this work, we report a novel microfluidic device designed for the synthesis of magnetically anisotropic Janus particles made of poly(ethylene glycol) diacrylate and embedded with magnetic iron oxide nanoparticles. Our method consists of a droplet generation step followed by magnetic separation using an external magnetic field and ultraviolet polymerization. The synthesized particles exhibit a monodisperse size distribution with a standard deviation of less than 3.5%, which is among the best size distributions obtained in the literature for magnetic Janus particles. The anisotropic magnetic property of the particles enable them to rotate about their own axes in the presence of an external magnetic field, introducing another degree of freedom to their motion. This microfluidic technique is simple, one-step, and versatile, offering control over the size distribution to synthesize magnetically anisotropic Janus particles.

Functional Zonation Strategy of Heterodimer Nanozyme for Multiple Chemiluminescence Imaging Immunoassay

Although nanozymes with intrinsic enzyme-like characteristics have aroused great interest in the biosensing field, the challenge is to keep high enzyme-like activity of the nanozyme after the modification of biomolecules onto nanozymes. Herein, a functional zonation strategy of a heterodimer nanozyme was proposed to tackle the challenge and further construct a multiple chemiluminescence (CL) imaging immunoassay. Here Fe3O4-Au as a heterodimer nanozyme model was divided into two zones, in which Fe3O4 nanoparticles (NPs) were regarded as a nanozyme zone and AuNPs were defined as an antibody immobilization zone. A signal amplification probe (Fe3O4-Au-Ab2) was prepared by modifying the secondary antibody (Ab2) on AuNPs of the Fe3O4-Au heterodimer owing to the Au-S bond. The exposed Fe3O4 of the Fe3O4-Au-Ab2 probe shows very high peroxidase-like activity and can efficiently catalyze H2O2-luminol to produce strong CL imaging signals for multiple antigens detection. Using chicken interleukin-4 (ChIL-4) and chicken gamma interferon (ChIFN-γ) as models, the proposed CL imaging immunoassay shows wide linear ranges (0.005-0.10 ng/mL for both ChIL-4 and ChIFN-γ) and low detection limits (0.58 pg/mL for ChIL-4, 0.47 pg/mL for ChIFN-γ) with the characteristics of high sensitivity, high specificity, and good stability. This work provides a promising functional zonation concept for nanozymes to construct new types of nanozyme probes for immunoassay of multiple biomolecules.

Janus Composite Particles and Interfacial Catalysis Thereby

Janus composite particles (JPs) with distinct compartmentalization of varied components thus performances and anisotropic shape display a variety of properties and have demonstrated great potentials in diversify practical applications. Especially, the catalytic JPs are advantageous for multi-phase catalysis with much easier separation of products and recycling the catalysts. In the first section of this review, typical methods to synthesize the JPs with varied morphologies are briefly surveyed in the category of polymeric, inorganic and polymer/inorganic composite. In the main section, recent progresses of the JPs in emulsion interfacial catalysis are summarized covering organic synthesis, hydrogenation, dye degradation, and environmental chemistry. The review will end by calling more efforts toward precision synthesis of catalytic JPs at large scale to meet the stringent requirements in practical applications such as catalytic diagnosis and therapy by the functional JPs.

Starch-based Janus particle: Fabrication, characterization and interfacial properties in stabilizing Pickering emulsion

Janus particles (J-OSPs) based on the composite of chitosan nanoparticles (CSNPs) and octadecenyl succinic anhydride starch (OSPs) were tailor-made by Pickering emulsion method and electrostatic interaction. With different positions of OSPs embedded in the oil phase of Pickering emulsion template and the diversified shapes of starch particles, J-OSPs exhibited various asymmetric structures, which was verified by scanning electron microscope (SEM) and confocal laser microscope (CLSM). By characterizing the interfacial characteristics of J-OSPs, directional distribution of CSNPs was found to enhance the hydrophobicity of J-OSPs and changed its surface charges from positive to negative as pH increased. When J-OSPs were taken as stabilizers, the formed Pickering emulsion had the highest emulsion index and viscosity compared with OSPs and OSPs fully covered by CSNPs (F-OSPs), which was attributed to the self-assembly property of Janus particles that enabled them to form larger aggregates to hinder the collapse of droplets. This study provides a new idea for the construction of plant-derived Janus particles, and its superiority in stabilizing the Pickering emulsion will broaden the application of Janus particles in the field of storage and delivery of active substances.

Amphiphilic Janus Particles Confined in Symmetrical and Janus-Like Slits

We use Monte Carlo simulations to investigate the behavior of Janus spheres composed of attractive and repulsive parts confined between two parallel solid surfaces. The slits with identical and competing walls are studied. The adsorption isotherms of Janus particles are determined, and the impact of the density in the pore on the morphology is discussed in detail. So far, this issue has not been systematically investigated. New, unique structures are observed along the isotherms, including the bilayer and three-layer structures located at different distances from the walls. We analyze how selected parameters affect the positional and orientational ordering in these layers. In some cases, the particles form highly ordered hexagonal lattices.

Target-Specific Delivery and Bioavailability of Pharmaceuticals via Janus and Dendrimer Particles

Nanosized Janus and dendrimer particles have emerged as promising nanocarriers for the target-specific delivery and improved bioavailability of pharmaceuticals. Janus particles, with two distinct regions exhibiting different physical and chemical properties, provide a unique platform for the simultaneous delivery of multiple drugs or tissue-specific targeting. Conversely, dendrimers are branched, nanoscale polymers with well-defined surface functionalities that can be designed for improved drug targeting and release. Both Janus particles and dendrimers have demonstrated their potential to improve the solubility and stability of poorly water-soluble drugs, increase the intracellular uptake of drugs, and reduce their toxicity by controlling the release rate. The surface functionalities of these nanocarriers can be tailored to specific targets, such as overexpressed receptors on cancer cells, leading to enhanced drug efficacy The design of these nanocarriers can be optimized by tuning the size, shape, and surface functionalities, among other parameters. The incorporation of Janus and dendrimer particles into composite materials to create hybrid systems for enhancing drug delivery, leveraging the unique properties and functionalities of both materials, can offer promising outcomes. Nanosized Janus and dendrimer particles hold great promise for the delivery and improved bioavailability of pharmaceuticals. Further research is required to optimize these nanocarriers and bring them to the clinical setting to treat various diseases. This article discusses various nanosized Janus and dendrimer particles for target-specific delivery and bioavailability of pharmaceuticals. In addition, the development of Janus-dendrimer hybrid nanoparticles to address some limitations of standalone nanosized Janus and dendrimer particles is discussed.

Target-Specific Delivery and Bioavailability of Pharmaceuticals via Janus and Dendrimer Particles

Nanosized Janus and dendrimer particles have emerged as promising nanocarriers for the target-specific delivery and improved bioavailability of pharmaceuticals. Janus particles, with two distinct regions exhibiting different physical and chemical properties, provide a unique platform for the simultaneous delivery of multiple drugs or tissue-specific targeting. Conversely, dendrimers are branched, nanoscale polymers with well-defined surface functionalities that can be designed for improved drug targeting and release. Both Janus particles and dendrimers have demonstrated their potential to improve the solubility and stability of poorly water-soluble drugs, increase the intracellular uptake of drugs, and reduce their toxicity by controlling the release rate. The surface functionalities of these nanocarriers can be tailored to specific targets, such as overexpressed receptors on cancer cells, leading to enhanced drug efficacy The design of these nanocarriers can be optimized by tuning the size, shape, and surface functionalities, among other parameters. The incorporation of Janus and dendrimer particles into composite materials to create hybrid systems for enhancing drug delivery, leveraging the unique properties and functionalities of both materials, can offer promising outcomes. Nanosized Janus and dendrimer particles hold great promise for the delivery and improved bioavailability of pharmaceuticals. Further research is required to optimize these nanocarriers and bring them to the clinical setting to treat various diseases. This article discusses various nanosized Janus and dendrimer particles for target-specific delivery and bioavailability of pharmaceuticals. In addition, the development of Janus-dendrimer hybrid nanoparticles to address some limitations of standalone nanosized Janus and dendrimer particles is discussed.

Molecular Engineering of Colloidal Atoms

Creation of architectures with exquisite hierarchies actuates the germination of revolutionized functions and applications across a wide range of fields. Hierarchical self-assembly of colloidal particles holds the promise for materialized realization of structural programing and customizing. This review outlines the general approaches to organize atom-like micro- and nanoparticles into prescribed colloidal analogs of molecules by exploiting diverse interparticle driving motifs involving confining templates, interactive surface ligands, and flexible shape/surface anisotropy. Furthermore, the self-regulated/adaptive co-assembly of simple unvarnished building blocks is discussed to inspire new designs of colloidal assembly strategies.

Enzymatic Janus Liposome Micromotors

A liposome-based micromotor system that utilizes regional enzymatic conversion and gas generation to achieve directional motion in water is presented. Constituted mainly of a low-melting lipid and a high-melting lipid together with cholesterol, these liposomes maintain stable Janus configuration at room temperature as a result of lipid liquid-liquid phase separation. Local placement of enzymes such as horseradish peroxidase is realized via affinity binding between avidin and biotin, the latter as a lipid conjugate sorted specifically into one domain of these Janus liposomes as a minor component. In the presence of the substrate, hydrogen peroxide, these enzyme-decorated Janus liposomes undergo directional motion, yielding velocities exceeding thermal diffusion by three folds in some cases. Experimental details on liposome size control, motor assembly, and substrate distribution are presented; effects of key experimental factors on liposome motion, such as substrate concentration and liposome Janus ratio, are also examined. This work thus provides a viable approach to building asymmetrical lipid-assembled, enzyme-attached colloids and, in addition, stresses the importance of asymmetry in achieving particle directional motion.

Preparation of asymmetric Janus hollow silica microparticle and its application on oily wastewaters

Janus nanoparticles have aroused the interest of scholars because of their highly efficient emulsification of spilled oils in wastewater. In this work, interfacially active Janus hollow glass microparticles (J-HGMPs) of asymmetric wettability were designed and synthesized in order to achieve more efficient separation of emulsified oil droplets from oily wastewater. Surface characteristic techniques such as FTIR, SEM, zeta potential and contact angle measurements had been employed to assess the amphiphilic surface properties of J-HGMPs. The oil removal/recovery performance of J-HGMPs in different oil-water systems and their interfacial activities were studied. As a particulate emulsifier, J-HGMPs could remove/recover > 96% oil from oil-water mixed phase. The results showed that J-HGMPs had strong interfacial activities and anchored firmly at oil/water interfaces. This high adsorption energy was also evaluated and verified via the calculation of Gibbs free energy. Overall, this study provided a novel and low-cost oil recovery method via a convenient buoyancy force that could be effectively applied in the treatment of oil spills while achieving the goal of benign and green environmental protection.

A Robust Switchable Oil-In-Water Emulsion Stabilized by Electrostatic Repulsions between Surfactant and Similarly Charged Carbon Dots

How to control the stability of oil-in-water (O/W) emulsions is one of the main topics for scientists working in colloidal systems. Recently, carbon dots (CDs) have received great interest as smart materials because of their excellent physicochemical properties and versatile applications. Herein, for the first time, advanced and switchable O/W emulsions are presented that are stabilized by the synergistic effect of cationic surfactant cetyltrimethylammonium bromide CTAB (emulsifier) and similarly charged CDs (stabilizer). In the formulated emulsion, the cationic surfactant molecules are adsorbed at the oil and water interface to decrease the interfacial tension and enrich the drops with a positive charge to ensure intensive electrostatic repulsions among them. On the contrary, cationic CDs are distributed in the water phase among the droplets to reduce the water secretion and prevent flocculation and droplet coalescence. The stabilizing effect is found to be universal for emulsions of a range of oil phases. Furthermore, the formulated emulsion is found to be switchable between "stable" and "unstable" modes by adding an equivalent of anionic surfactant sodium dodecyl benzene sulphonate (SDBS). The stabilized and switchable O/W emulsions are believed to have wide practical applications in water purification, pharmaceuticals, protein recognition, as well as catalysis.

Hybrid Nanoparticles at Fluid-Fluid Interfaces: Insight from Theory and Simulation

Hybrid nanoparticles that combine special properties of their different parts have numerous applications in electronics, optics, catalysis, medicine, and many others. Of the currently produced particles, Janus particles and ligand-tethered (hairy) particles are of particular interest both from a practical and purely cognitive point of view. Understanding their behavior at fluid interfaces is important to many fields because particle-laden interfaces are ubiquitous in nature and industry. We provide a review of the literature, focusing on theoretical studies of hybrid particles at fluid-fluid interfaces. Our goal is to give a link between simple phenomenological models and advanced molecular simulations. We analyze the adsorption of individual Janus particles and hairy particles at the interfaces. Then, their interfacial assembly is also discussed. The simple equations for the attachment energy of various Janus particles are presented. We discuss how such parameters as the particle size, the particle shape, the relative sizes of different patches, and the amphiphilicity affect particle adsorption. This is essential for taking advantage of the particle capacity to stabilize interfaces. Representative examples of molecular simulations were presented. We show that the simple models surprisingly well reproduce experimental and simulation data. In the case of hairy particles, we concentrate on the effects of reconfiguration of the polymer brushes at the interface. This review is expected to provide a general perspective on the subject and may be helpful to many researchers and technologists working with particle-laden layers.

Bottom-Up Construction of the Interaction between Janus Particles

While the interaction between two uniformly charged spheres─viz colloids─is well-known, the interaction between nonuniformly charged spheres such as Janus particles is not. Specifically, the Derjaguin approximation relates the potential energy between two spherical particles with the interaction energy Vpl per unit area between two planar surfaces. The formalism has been extended to obtain a quadrature expression for the screened electrostatic interaction between Janus colloids with variable relative orientations. The interaction is decomposed into three zones in the parametric space, distinguished by their azimuthal symmetry. Different specific situations are examined to estimate the contributions of these zones to the total energy. The effective potential Vpl is renormalized such that the resulting potential energy is identical with the actual one for the most preferable relative orientations between the Janus particles. The potential energy as a function of the separation distance and the mutual orientation of a pair of particles compares favorably between the analytical (but approximate) form and the rigorous point-wise computational model used earlier. Coarse-grained models of Janus particles can thus implement this potential model efficiently without loss of generality.

Mechanical Janus Structures by Soft-Hard Material Integration

Engineering Janus structures that possess anisotropic features in functions have attracted growing attention for a wide range of applications in sensors, catalysis, and biomedicine, and are yet usually designed at the nanoscale with distinct physical or chemical functionalities in their opposite sides. Inspired by the seamless integration of soft and hard materials in biological structures, here a mechanical Janus structure composed of soft and hard materials with a dramatic difference in mechanical properties at an additively manufacturable macroscale is presented. In the combination of extensive experimental, theoretical, and computational studies, the design principle of soft-hard materials integrated mechanical Janus structures is established and their unique rotation mechanism is addressed. The systematic studies of assembling the Janus structure units into superstructures with well-ordered organizations by programming the local rotations are further shown, providing a direct route of designing superstructures by leveraging mechanical Janus structures with unique soft-hard material integration. Applications are conducted to demonstrate the features and functionalities of assembled superstructures with local ordered organizations in regulating and filtering acoustic wave propagations, thereby providing exemplification applications of mechanical Janus design in functional structures and devices.

A Janus Au-Polymersome Heterostructure with Near-Field Enhancement Effect for Implant-Associated Infection Phototherapy

Polymer-inorganic hybrid Janus nanoparticles (PI-JNPs) have attracted extensive attention due to their special structures and functions. However, achieving the synergistic enhancement of photochemical activity between polymer and inorganic moieties in PI-JNPs remains challenging. Herein, the construction of a novel Janus Au-porphyrin polymersome (J-AuPPS) heterostructure by a facile one-step photocatalytic synthesis is reported. The near-field enhancement (NFE) effect between porphyrin polymersome (PPS) and Au nanoparticles in J-AuPPS is achieved to enhance its near-infrared (NIR) light absorption and electric/thermal field intensity at their interface, which improves the energy transfer and energetic charge-carrier generation. Therefore, J-AuPPS shows a higher NIR-activated photothermal conversion efficiency (48.4%) and generates more singlet oxygen compared with non-Janus core-particle Au-PPS nanostructure (28.4%). As a result, J-AuPPS exhibits excellent dual-mode (photothermal/photodynamic) antibacterial and anti-biofilm performance, thereby significantly enhancing the in vivo therapeutic effect in an implant-associated-infection rat model. This work is believed to motivate the rational design of advanced hybrid JNPs with desirable NFE effect and further extend their biological applications.

Colloidal Synthesis of Metal Nanocrystals: From Asymmetrical Growth to Symmetry Breaking

Nanocrystals offer a unique platform for tailoring the physicochemical properties of solid materials to enhance their performances in various applications. While most work on controlling their shapes revolves around symmetrical growth, the introduction of asymmetrical growth and thus symmetry breaking has also emerged as a powerful route to enrich metal nanocrystals with new shapes and complex morphologies as well as unprecedented properties and functionalities. The success of this route critically relies on our ability to lift the confinement on symmetry by the underlying unit cell of the crystal structure and/or the initial seed in a systematic manner. This Review aims to provide an account of recent progress in understanding and controlling asymmetrical growth and symmetry breaking in a colloidal synthesis of noble-metal nanocrystals. With a touch on both the nucleation and growth steps, we discuss a number of methods capable of generating seeds with diverse symmetry while achieving asymmetrical growth for mono-, bi-, and multimetallic systems. We then showcase a variety of symmetry-broken nanocrystals that have been reported, together with insights into their growth mechanisms. We also highlight their properties and applications and conclude with perspectives on future directions in developing this class of nanomaterials. It is hoped that the concepts and existing challenges outlined in this Review will drive further research into understanding and controlling the symmetry breaking process.

Recent advancements in Janus nanoparticle-based biosensing platforms

Nanoparticles have aided in the development of nano-based sensors for diagnostic applications. However, use of nanoparticles in the development of sensing devices for multiple analyte detection is constrained due to their inability to detect several analytes with a single type of nanoparticle. The term "Janus particle" refers to micro or nanoscale particles that have been divided into sections or compartments, each of which has a distinct set of chemical or physical properties, producing multifunctional particles endowed with distinctive qualities. Furthermore, Janus particles have the ability to perform multiple functions within a single particle at the same time, with no interference from adjacent sections. This review focuses on the use of Janus particles in the fabrication of biosensors as well as in the investigation of various properties endowed by these Janus particles for their use as biosensors. It also discusses the various types of Janus particle-based biosensors that are currently available. Finally, the limitations of Janus particles in sensor technologies and their future scope have been discussed.

Graphical abstract

Interfacial-assembly engineering of asymmetric magnetic-mesoporous organosilica nanocomposites with tunable architectures

The asymmetric morphology of nanomaterials plays a crucial role in regulating their physical and chemical properties, which can be tuned by two key factors: (i) interfacial interaction between seed particles and growth materials (anisotropic island nucleation) and (ii) reaction kinetics of the growth material (growth approach). However, controllable preparation of asymmetric nanoarchitectures is a daunting challenge because it is difficult to tune the interfacial energy profile of a nanoparticle. Here, we report an interfacial-assembly strategy that makes use of different surfactant/organosilica-oligomer micelles to actively regulate interfacial energy profiles, thus enabling controllable preparation of well-defined asymmetric nanoarchitectures (i.e., organosilica nano-tails) on magnetic Fe₃O₄ nanoparticles. For our magnetic nanocomposite system, the assembly structure of surfactant/organosilica-oligomer micelles and the interfacial electrostatic interaction are found to play critical roles in controlling the nucleation and architectures of asymmetric magnetic-mesoporous organosilica nanocomposite particles (AMMO-NCPs). Surfactant/organosilica-oligomer micelles with a one-dimensional wormlike linear structure could strengthen the interfacial assembly behavior between seed particles and growth materials, and thus achieved the longest tail length (25 μm) exceeding the previously reported highest recorded value (2.5 μm) of one order of magnitude. In addition, clickable AMMO-NCPs can employ a thiol-ene click reaction to modify their surface with a broad range of functional groups, such as amines, carboxyls, and even long alkyl chains, which allows for expanding functionalities. We demonstrate that C18 alkyl-grafted AMMO-NCPs can self-assemble into self-standing membranes with robust superhydrophobicity. In addition, carboxyl-modified AMMO-NCPs exhibit excellent adsorption capacity for cationic compounds. This study paves the way for designing and synthesizing asymmetric nanomaterials, which possess immense potential for future engineering applications in nanomaterial assembly, nanoreactors, biosensing, drug delivery, and beyond.

Preparation of Janus Droplets and Hydrogels with Controllable Morphologies by an Aqueous Two-Phase System on the Superamphiphobic Surface

Janus particles, having the property integration of each component, have attracted increasing attention due to their considerable potential in the field of material engineering applications. However, organic solvents or sophisticated equipment during the fabrication processes is generally inevitable. Here, we report a facile route to prepare Janus droplets and hydrogels via aqueous two-phase systems (ATPS). Simply merging two polymers, i.e., polyethylene glycol (PEG) and dextran (DEX), as aqueous droplets on a superamphiphobic surface leads to phase separation, provided that their concentrations exceed the threshold in the mixed aqueous droplets, thus generating a Janus structure. Various morphologies of such Janus droplets can be well controlled by manipulating the locations of these two polymers' concentration on the phase diagram, and the evolution of the mixed droplets are deterministic on the basis of the kinetics of their phase separation and the degree of hydrophobicity of the substrate. Introducing monomers and/or nanoparticles, further, into a certain phase of the ATPS droplet followed by photopolymerizing enables Janus hydrogel particles with diverse functionalities to be obtained. The ease and green techniques with which the Janus balance and curvature between two phases of the Janus droplet can be finely tuned point to new directions in designing Janus particles and hold great promises in biological engineering.

Self-Assembly of Matchstick-Shaped Inorganic Nano-Surfactants with Controlled Surface Amphiphilicity

Molecular and nanoscale amphiphiles have been extensively studied as building blocks for organizing macroscopic matter through specific and local interactions. Among various amphiphiles, inorganic Janus nanoparticles have attracted a lot of attention owing to their ability to impart multifunctionalities, although the programmability to achieve complicated self-assembly remains a challenge. Here, we synthesized matchstick-shaped Janus nano-surfactants that mimic organic surfactant molecules and studied their programmable self-assembly. High amphiphilicity was achieved through the hard-soft acid-base-based ligand-exchange reaction with strong selectivity on the surface of nano-matchsticks consisting of Ag₂S heads and CdS stems. The obtained nano-surfactants spontaneously assembled into diverse ordered structures such as lamellar, curved, wrinkled, cylindrical, and micellar structures depending on the vertical asymmetry and the interfacial tension controlled by their geometry and surface ligands. The correlation between the phase selectivity of suprastructures and the characteristics of nano-surfactants is discussed. This study realized the molecular amphiphile-like programmability of inorganic Janus nanostructures in self-assembly with the precise control on the surface chemistry.

Microfluidic Methods in Janus Particle Synthesis

Janus particles have been at the center of attention over the years due to their asymmetric nature that makes them superior in many ways to conventional monophase particles. Several techniques have been reported for the synthesis of Janus particles; however, microfluidic-based techniques are by far the most popular due to their versatility, rapid prototyping, low reagent consumption and superior control over reaction conditions. In this review, we will go through microfluidic-based Janus particle synthesis techniques and highlight how recent advances have led to complex functionalities being imparted to the Janus particles.

Naturally Derived Janus Cellulose Nanomaterials: Anisotropic Cellulose Nanomaterial Building Blocks and Their Assembly into Asymmetric Structures

Naturally derived cellulose nanomaterials (CNMs) with desirable physicochemical properties have drawn tremendous attention for their versatile applications in a broad range of fields. More recently, Janus amphiphilic cellulose nanomaterial particles with asymmetric structures (i.e., reducing and nonreducing ends and crystalline and amorphous domains) have been in the spotlight, offering a rich and sophisticated toolbox for Janus nanomaterials. With careful surface and interfacial engineering, Janus CNM particles have demonstrated great potential as surface modifiers, emulsifiers, stabilizers, compatibilizers, and dispersants in emulsions, nanocomposites, and suspensions. Naturally derived Janus CNM particles offer a fascinating opportunity for scaling up the production of self-standing Janus CNM membranes. Nevertheless, most Janus CNM membranes to date are constructed by asymmetric fabrication or asymmetric modification without considering the Janus traits of CNM particles. More future research should focus on the self-assembly of Janus CNM particles into bulk self-standing Janus CNM membranes to enable more straightforward and sustainable approaches for Janus membranes. This review explores the fabrication, structure-property relationship, and Janus configuration mechanisms of Janus CNM particles and membranes. Janus CNM membranes are highlighted for their versatile applications in liquid, thermal, and light management. This review also highlights the significant advances and future perspectives in the construction and application of sustainable Janus CNM particles and membranes.

Polymer-mediated self-assembly, dispersion, and phase separation of Janus nanorods

The challenge of stabilizing polymer nanocomposites lies in the fact that nanoparticles tend to phase separate from the polymer melt due to an entropic 'depletion attraction' between nanoparticles. Additionally, composites of polymer and nanorods show a decrease in miscibility with increasing nanorod aspect ratio [U. K. Sankar and M. Tripathy, Macromolecules, 2015, 48, 432-442; U. Erigi, U. Dhumal and M. Tripathy, J. Chem. Phys., 2021, 154, 124903]. In this work, we have studied the structure and phase behaviour of polymer-Janus nanorod mixtures using Polymer Reference Interaction Site Model (PRISM) theory and molecular dynamics simulations. The composite system of polymer and Janus nanorods of two different thicknesses, at various Janus nanorod densities, and for different interaction strengths between polymer and attractive sites of Janus nanorods (ε_pa), is investigated for their miscibility and self-assembly. At low Janus nanorod density, PRISM theory predicts transitions from the entropic depletion-driven contact aggregation of Janus nanorods to a well-dispersed phase to the bridging-driven phase separation of Janus nanorods, with increasing ε_pa. This behaviour is similar to earlier predictions for homogeneous nanorods. However, molecular dynamics simulations do not confirm the bridging-driven phase separation at high ε_pa predicted by PRISM theory. We find that both PRISM theory and molecular dynamics simulations are in agreement in the intermediate and high Janus nanorod density regimes. PRISM theory predicts, and simulations confirm, that at high Janus nanorod densities, the system undergoes a transition from depletion-driven macrophase separation to dispersion to chemical anisotropy-driven self-assembly with increasing ε_pa. The self-assembly at high ε_pa is mediated by the polymer. At intermediate Janus nanorod densities, the usual transition from an entropic depletion-driven macrophase separation to dispersion is predicted at low ε_pa. At high ε_pa, both PRISM theory and molecular dynamics simulations show transition to a state that is simultaneously macrophase separated and microphase separated (self-assembled).

Electrochemiluminescence Systems for the Detection of Biomarkers: Strategical and Technological Advances

Electrochemiluminescence (ECL)-based sensing systems rely on light emissions from luminophores, which are generated by high-energy electron transfer reactions between electrogenerated species on an electrode. ECL systems have been widely used in the detection and monitoring of diverse, disease-related biomarkers due to their high selectivity and fast response times, as well as their spatial and temporal control of luminance, high controllability, and a wide detection range. This review focuses on the recent strategic and technological advances in ECL-based biomarker detection systems. We introduce several sensing systems for medical applications that are classified according to the reactions that drive ECL signal emissions. We also provide recent examples of sensing strategies and technologies based on factors that enhance sensitivity and multiplexing abilities as well as simplify sensing procedures. This review also discusses the potential strategies and technologies for the development of ECL systems with an enhanced detection ability.

Supramolecular Precursor Strategy to Construct g-C3N4/Silica Hybrid Nanosheets for Photocatalytic Degradation of Dye and Antibiotic Pollutants

To construct a highly active g-C₃N₄ (CN)/silica hybrid nanosystem, the supramolecular precursor strategy of introducing melamine-cyanuric acid (MCA) by synergistically using micromolecular melamine (m) and urea (u) for CN nanostructure construction on the silica nanosheets (SiNSs) surface was researched. The results showed that the introduction of MCA supramolecular aggregates promoted the generation of ordered CN nanostructures attached to SiNSs, and the morphology of the CN nanostructure could be regulated through the m/u mass ratio. When the ratio is equal to 1/30, a typical g-C₃N₄/silica hybrid nanosheet (mu-CN/SiNSs-3) was successfully prepared, which showed the ultra-high photocatalytic activity for Rhodamine B dye degradation within 25 min with an apparent rate constant of 0.186 min^-1, owing to the large surface area of highly dispersed and ordered CN nanosheets, a strong interaction between CN and SiNSs, high photogenerated carriers separation efficiency, and the more negative conduction band potential offering more active species of ¹O₂ and ^•O₂^-. Unexpectedly, the mu-CN/SiNSs-2 composite (m/u = 1/10) exhibited the highest activity for tetracycline antibiotic degradation, mainly due to the morphological advantage of a certain number of nanotubes generated on the CN/SiNSs hybrid nanosheets. It indicates that the supramolecular precursor strategy by synergistically using melamine and urea is highly efficient for the nanostructure construction of the CN/SiNSs hybrid system, enabling an appropriate nanostructure for the photodegradation of various pollutants.

Nano-architectural design of TiO2 for high performance photocatalytic degradation of organic pollutant: A review

In the past several decades, significant efforts have been paid toward photocatalytic degradation of organic pollutants in environmental research. During the past years, titanium dioxide nano-architectures (TiO2 NAs) have been widely used in water purification applications with photocatalytic degradation processes under Uv/Vis light illumination. Photocatalysis process with nano-architectural design of TiO2 is viewed as an efficient procedure for directly channeling solar energy into water treatment reactions. The considerable band-gap values and the subsequent short life time of photo-generated charge carriers are showed among the limitations of this approach. One of these effective efforts is the using of oxidation processes with advance semiconductor photocatalyst NAs for degradation the organic pollutants under UV/Vis irradiation. Among them, nano-architectural design of TiO2 photocatalyst (such as Janus, yolk-shell (Y@S), hollow microspheres (HMSs) and nano-belt) is an effective way to improve oxidation processes for increasing photocatalytic activity in water treatment applications. In the light of the above issues, this study tends to provide a critical overview of the used strategies for preparing TiO2 photocatalysts with desirable physicochemical properties like enhanced absorption of light, low density, high surface area, photo-stability, and charge-carrier behavior. Among the various nanoarchitectural design of TiO2, the Y@S and HMSs have created a great appeal given their considerable large surface area, low density, homogeneous catalytic environment, favorable light harvesting properties, and enhanced molecular diffusion kinetics of the particles. In this review was summarized the developments that have been made for nano-architectural design of TiO2 photocatalyst. Additional focus is placed on the realization of interfacial charge and the possibility of achieving charge carriers separation for these NAs as electron migration is the extremely important factor for increasing the photocatalytic activity.