Near-bulk conductivity of gold nanowires as nanoscale interconnects and the role of atomically smooth interface

Wafer-Scale Nanoprinting of 3D Interconnects beyond Cu

Cloud operations and services, as well as many other modern computing tasks, require hardware that is run by very densely packed integrated circuits (ICs) and heterogenous ICs. The performance of these ICs is determined by the stability and properties of the interconnects between the semiconductor devices and ICs. Although some ICs with 3D interconnects are commercially available, there has been limited progress on 3D printing utilizing emerging nanomaterials. Moreover, laying out reliable 3D metal interconnects in ICs with the appropriate electrical and physical properties remains challenging. Here, we propose high-throughput 3D interconnection with nanoscale precision by leveraging lines of forces. We successfully nanoprinted multiscale and multilevel Au, Ir, and Ru 3D interconnects on the wafer scale in non-vacuum conditions using a pulsed electric field. The ON phase of the pulsed field initiates in situ printing of nanoparticle (NP) deposition into interconnects, whereas the OFF phase allows the gas flow to evenly distribute the NPs over an entire wafer. Characterization of the 3D interconnects confirms their excellent uniformity, electrical properties, and free-form geometries, far exceeding those of any 3D-printed interconnects. Importantly, their measured resistances approach the theoretical values calculated here. The results demonstrate that 3D nanoprinting can be used to fabricate thinner and faster interconnects, which can enhance the performance of dense ICs; therefore, 3D nanoprinting can complement lithography and resolve the challenges encountered in the fabrication of critical device features.

Materials Quest for Advanced Interconnect Metallization in Integrated Circuits

Integrated circuits (ICs) are challenged to deliver historically anticipated performance improvements while increasing the cost and complexity of the technology with each generation. Front-end-of-line (FEOL) processes have provided various solutions to this predicament, whereas the back-end-of-line (BEOL) processes have taken a step back. With continuous IC scaling, the speed of the entire chip has reached a point where its performance is determined by the performance of the interconnect that bridges billions of transistors and other devices. Consequently, the demand for advanced interconnect metallization rises again, and various aspects must be considered. This review explores the quest for new materials for successfully routing nanoscale interconnects. The challenges in the interconnect structures as physical dimensions shrink are first explored. Then, various problem-solving options are considered based on the properties of materials. New materials are also introduced for barriers, such as 2D materials, self-assembled molecular layers, high-entropy alloys, and conductors, such as Co and Ru, intermetallic compounds, and MAX phases. The comprehensive discussion of each material includes state-of-the-art studies ranging from the characteristics of materials by theoretical calculation to process applications to the current interconnect structures. This review intends to provide a materials-based implementation strategy to bridge the gap between academia and industry.

Revealing the pulse-induced electroplasticity by decoupling electron wind force

Micro/nano electromechanical systems and nanodevices often suffer from degradation under electrical pulse. However, the origin of pulse-induced degradation remains an open question. Herein, we investigate the defect dynamics in Au nanocrystals under pulse conditions. By decoupling the electron wind force via a properly-designed in situ TEM electropulsing experiment, we reveal a non-directional migration of Σ3{112} incoherent twin boundary upon electropulsing, in contrast to the expected directional migration under electron wind force. Quantitative analyses demonstrate that such exceptional incoherent twin boundary migration is governed by the electron-dislocation interaction that enhances the atom vibration at dislocation cores, rather than driven by the electron wind force in classic model. Our observations provide valuable insights into the origin of electroplasticity in metallic materials at the atomic level, which are of scientific and technological significances to understanding the electromigration and resultant electrical damage/failure in micro/nano-electronic devices.

State of the art of ultra-thin gold layers: formation fundamentals and applications

Fabrication of ultra-thin gold (Au) layers (UTGLs) has been regarded as the key technique to achieve applications with tunable optical response, flexible sensors and electronic devices. Various strategies have been developed to optimize the wetting process of Au, resulting in the formation of UTGLs at a minimum thickness. The related studies on UTGLs attracted huge attention in recent years. On the one hand, the growth processes of UTGLs on different substrates were in-depth probed by advanced in situ characterization techniques and the effects of optimization strategies on the growth of UTGLs were also revealed. On the other hand, based on the understanding of the growth behavior and the assistance of optimization strategies, various applications of UTGLs were realized based on optical/plasmon responses, surface-enhanced Raman scattering and as electrodes for various sensors and electronic devices, as well as being seed layers for thin film growth. In this focused review, both the fundamental and practical studies on UTGLs in the most recent years are elaborated in detail. The growth processes of UTGLs revealed by in situ characterization techniques, such as grazing-incidence small-angle X-ray scattering (GISAXS), as well as the state of the art of UTGL-based applications, are reviewed.

Tuning the electro-optical properties of nanowire networks

Conductive and transparent metallic nanowire networks are regarded as promising alternatives to Indium-Tin-Oxides (ITOs) in emerging flexible next-generation technologies due to their prominent optoelectronic properties and low-cost fabrication. The performance of such systems closely relies on many geometrical, physical, and intrinsic properties of the nanowire materials as well as the device-layout. A comprehensive computational study is essential to model and quantify the device's optical and electrical responses prior to fabrication. Here, we present a computational toolkit that exploits the electro-optical specifications of distinct device-layouts, namely standard random nanowire network and transparent mesh pattern structures. The target materials for transparent conducting electrodes of this study are aluminium, gold, copper, and silver nanowires. We have examined a variety of tunable parameters including network area fraction, length to diameter aspect ratio, and nanowires angular orientations under different device designs. Moreover, the optical extinction efficiency factors of each material are estimated by two approaches: Mie light scattering theory and finite element method (FEM) algorithm implemented in COMSOL®Multiphysics software. We studied various nanowire network structures and calculated their respective figures of merit (optical transmittance versus sheet resistance) from which insights on the design of next-generation transparent conductor devices can be inferred.

From spherical compartments to polymer films: exploiting vesicle fusion to generate solid supported thin polymer membranes

Solid supported polymer membranes as scaffold for the insertion of functional biomolecules provide the basis for mimicking natural membranes. They also provide the means for unraveling biomolecule-membrane interactions and engineering platforms for biosensing. Vesicle fusion is an established procedure to obtain solid supported lipid bilayers but the more robust polymer vesicles tend to resist fusion and planar membranes rarely form. Here, we build on vesicle fusion to develop a refined and efficient way to produce solid supported membranes based on poly(dimethylsiloxane)-poly(2-methyl-2-oxazoline) (PMOXA-b-PDMS-b-PMOXA) amphiphilic triblock copolymers. We first create thiol-bearing polymer vesicles (polymersomes) and anchor them on a gold substrate. An osmotic shock then provokes polymersome rupture and drives planar film formation. Prerequisite for a uniform amphiphilic planar membrane is the proper combination of immobilized polymersomes and osmotic shock conditions. Thus, we explored the impact of the hydrophobic PDMS block length of the polymersome on the formation and the characteristics of the resulting solid supported polymer assemblies by quarz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM) and spectroscopic ellipsometry (SE). When the PDMS block is short enough, attached polymersomes restructure in response to osmotic shock, resulting in a uniform planar membrane. Our approach to rapidly form planar polymer membranes by vesicle fusion brings many advantages to the development of synthetic planar membranes for bio-sensing and biotechnological applications.

Synergistic effects of immunoregulation and osteoinduction of ds-block elements on titanium surface

Ds-block elements have been gaining increasing attention in the field of biomaterials modification, owing to their excellent biological properties, such as antibiosis, osteogenesis, etc. However, their function mechanisms are not well understood and conflicting conclusions were drawn by previous studies on this issue, which are mainly resulted from the inconsistent experimental conditions. In this work, three most widely used ds-block elements, copper, zinc, and silver were introduced on titanium substrate by plasma immersion ion implantation method to investigate the rule of ds-block elements in the immune responses. Results showed that the implanted samples could decrease the inflammatory responses compared with Ti sample. The trend of anti-inflammatory effects of macrophages on samples was in correlation with cellular ROS levels, which was induced by the implanted biomaterials and positively correlated with the number of valence electrons of ds-block elements. The co-culture experiments of macrophages and bone marrow mesenchymal stem cells showed that these two kinds of cells could enhance the anti-inflammation and osteogenesis of samples by the paracrine manner of PGE2. In general, in their steady states on titanium substrate (Cu2+, Zn2+, Ag), the ds-block elements with more valence electrons exhibit better anti-inflammatory and osteogenic effects. Moreover, molecular biology experiments indicate that the PGE2-related signaling pathway may contribute to the desired immunoregulation and osteoinduction capability of ds-block elements. These findings suggest a correlation between the number of valence electrons of ds-block elements and the relevant biological responses, which provides new insight into the selection of implanted ions and surface design of biomaterials.

Gold Nanowires from Nanorods

Gold nanowires (AuNWs) possess strong potential application in micro- and nanoelectronics as well as in plasmonic waveguides because of their low electrical resistance. However, the synthesis of pure solvent-dispersible AuNWs with full control over their length still remains a challenge. All the previously reported methods produce AuNWs with other impurities such as smaller nanorods, platelets, and spherical particles and are limited to a certain length (typically below 10 μm). This article describes a one-step synthesis of extremely long AuNWs (up to 25 μm) with great control over their dimensions by using pentahedrally twinned gold nanorods (AuNRs) as seed particles. To induce the AuNW growth, the reduction of Au(I) to Au(0) was carried out on the surface of AuNRs at a very low pH by introducing HCl into the growth solution. The slow conversion of Au(I) to Au(0) due to the increase in reduction potential at lower pH promoted the preferential deposition of metallic gold on the more reactive tips of AuNRs compared to their sides, resulting in the formation of AuNWs. In analogy to the "living" polymerization reaction, the length of the AuNWs was proportional to the amount of Au(I) added to the growth solution; thus, the desired length of AuNWs was achieved by controlling the supply of Au(I) ions in the reaction mixture. The AuNWs longer than 6 μm were found to be responsive to microwave radiation. When an aqueous solution of AuNWs was exposed to microwaves, the formation of sharp kinks was observed in several locations of AuNWs without their disintegration into smaller pieces.

Cold welding assisted self-healing of fractured ultrathin Au nanowires

In nano-electronic field, cold welding is a simple novel method to join ultrathin noble metal nanowires (NWs) without introducing extra energy and defects. In previous works, it always occurred between ultrathin noble metal NWs, tensile fracture parts of a single NW, or a NW formation from nanoparticles. However, some external force is still needed to drive the materials as close to each other as possible before the process. Here, we proposed a new method to achieve cold welding without introducing artificial loadings. The bending fractured ultrathin gold (Au) NW can be self-healed assisted by cold welding during the removal of the tungsten (W) tip by in situ transmission electron microscope (TEM). A new interface with lattice mismatch formed in the welding zone after multiple periodic cycles, leaving an angle between the two rebonded fracture parts. Furthermore, the cold welding assisted self-healing of the bending fractured ultrathin Au NW and atom evolutions were also confirmed by molecular dynamics (MD) simulations. The successful implementation of cold welding makes the self-healing come true when the ultrathin Au NW fractures under the unexpected vibrations.

Beyond linearity: bent crystalline copper nanowires in the small-to-moderate regime

Several models can describe the nonlinear response of 1D objects to bending under a concentrated load. Successive stages consisting of geometrical and, additionally, mechanical non-linearity can be identified in moderately large extensions. We provide an explicit bending moment function with terms accounting for the linearity (Euler-Bernoulli), quasi-linearity, geometrical and finally, mechanical non-linearity as global features of a moderately large elastic deformation. We apply our method, also suitable for other metals, to the experimental data of Cu nanowires (NWs) with an aspect ratio of about 16 under different concentrated loadings. The spatial distribution of strain-hardening/softening along the wire or through the cross-section is also demonstrated. As a constitutive parameter, the strain-dependent stretch modulus represents, undoubtedly, changes in the material properties as the deformation progresses. At the highest load, the Green-Lagrange strain reaches a 12.5% extension with a corresponding ultra-high strength of about 7.45 GPa at the most strained volume still in the elastic regime. The determined stretch modulus indicates a significantly lower elastic response with an approximated Young's modulus (E ≅ 65 GPa) and a third-order elastic constant, C 111 ≅ -350 GPa. Surprisingly, these constants suggest a 25-35% of that of the bulk counterparts. Ultimately, the method not only provides a quantitative description of the bent Cu NWs, but also indicates the robustness of the theory of nonlinear elasticity.

Key factors affecting Rayleigh instability of ultrathin 4H hexagonal gold nanoribbons

Rayleigh instability was originally used to describe the phenomenon of a cylindrical fluid jet that transforms into a chain of droplets. Very recently, it has been extended to metallic nanostructures like gold (Au) and silver (Ag) nanowires (NWs), as well as mixed alloy NWs by some thermodynamic processes. To date, the key factors affecting the Rayleigh instability have not been well studied. To clarify this, we systematically investigate the features of Rayleigh instability in ultrathin 4H hexagonal Au nanoribbons (NRBs) under electron beam (E-beam) irradiation. We prove that by decreasing the initial widths of 4H Au NRBs and the E-beam current density, as well as the irradiation time and intensity per unit area, the Rayleigh instability can be effectively restrained. Our work thus sheds light on how to effectively reduce or even eliminate the Rayleigh instability of one dimensional nanomaterials.

High-Rate Printing of Micro/Nanoscale Patterns Using Interfacial Convective Assembly

Printing of electronics has been receiving increasing attention from academia and industry over the recent years. However, commonly used printing techniques have limited resolution of micro- or sub-microscale. Here, a directed-assembly-based printing technique, interfacial convective assembly, is reported, which utilizes a substrate-heating-induced solutal Marangoni convective flow to drive particles toward patterned substrates and then uses van der Waals interactions as well as geometrical confinement to trap the particles in the pattern areas. The influence of various assembly parameters including type of mixing solvent, substrate temperature, particle concentration, and assembly time is investigated. The results show successful assembly of various nanoparticles in patterns of different shapes with a high resolution down to 25 nm. In addition, the assembly only takes a few minutes, which is two orders of magnitude faster than conventional convective assembly. Small-sized (diameter below 5 nm) nanoparticles tend to coalesce during the assembly process and form sintered structures. The fabricated silver nanorods show single-crystal structure with a low resistivity of 8.58 × 10^-5 Ω cm. With high versatility, high resolution, and high throughput, the interfacial convective assembly opens remarkable opportunities for printing next generation nanoelectronics and sensors.

DNA-Guided Room-Temperature Synthesis of Single-Crystalline Gold Nanostructures on Graphdiyne Substrates

Nobel metal nanoparticles with tunable morphologies are highly desirable due to their unique electronic, magnetic, optical, and/or catalytic features. Here we report the use of multilayered graphdyine (GD) as a substrate for the reductant-free, room-temperature synthesis of single-crystal Au nanostructures with tunable morphology. We find that the GD template rich in sp-carbon atoms possesses high affinity with Au atoms on the {111} facets, and that the intrinsic reductivity of GD facilitates the rapid growth of Au nanoplates. The introduction of single-stranded DNA strands further results in the synthesis of Au nanostructures with decreased anisotropy, i.e., polygons and flower-like nanoparticles. The DNA-guided tunable Au growth arises from the strong adsorption of DNA on the GD template that alters the uniformity of the interface, which provides a direct route to synthesize Au nanostructures with tailorable morphology and photonic properties.

Solution synthesis of anisotropic gold microcrystals

Amplification of pentahedrally twinned gold nanorods with Au(i)/AA results in the formation of very well-defined anisotropic microcrystals of gold referred to as gold microrods.

AFM Manipulation of Gold Nanowires To Build Electrical Circuits

We introduce scanning-probe-assisted nanowire circuitry (SPANC) as a new method to fabricate electrodes for the characterization of electrical transport properties at the nanoscale. SPANC uses an atomic force microscope (AFM) to manipulate nanowires to create complex and highly conductive nanostructures (paths) that work as nanoelectrodes, allowing connectivity and electrical characterization of other nano-objects. The paths are formed by the spontaneous cold welding of gold nanowires upon mechanical contact, leading to an excellent contact resistance of ∼9 Ω/junction. SPANC is an easy to use and cost-effective technique that fabricates clean nanodevices. Hence, this new method can complement and/or be an alternative to other well-established methods to fabricate nanocircuits such as electron beam lithography (EBL). The circuits made by SPANC are easily reconfigurable, and their fabrication does not require the use of polymers and chemicals. In this work, we present a few examples that illustrate the capabilities of this method, allowing robust device fabrication and electrical characterization of several nano-objects with sizes down to ∼10 nm, well below the current smallest size able to be contacted in a device using the standard available technology (∼30 nm). Importantly, we also provide the first experimental determination of the sheet resistance of thin antimonene flakes.

Effect of the Crystallization Process of Surfactant Bilayer Lamellar Structures on the Elongation of High-Aspect-Ratio Gold Nanorods

The growth mechanism of an "in-gel synthesis method", that is, the effects of composition and structure of the lamellar gel phase below the Krafft temperature of surfactant solutions on the growth of long gold nanorods, was investigated. We changed the alkyl chain length of surfactant molecules to investigate the effect of surfactant self-assembly on the elongation of gold nanorods systematically; eight mixed solutions of alkyltrimethylammonium bromide (C nTAB; n = 2-16; n = even) with C18TAB were used for investigation. The Krafft temperature, self-assembly of surfactant molecules, and the crystallization process of each mixture were observed by differential scanning calorimetry, wide-angle X-ray scattering, visual inspection, and small-angle X-ray scattering. Gold nanorods were synthesized in these eight surfactant mixtures. These observations demonstrated that when the surfactant L_β phase sustains for a long time, the space of the water layer is also kept large enough for the seeds to take up Au ions bound to surfactant micelles. In this case, the seeds can form long nanorods between bilayers. We conclude that not only the stability of the lamellar gel phase but also co-existence of Au-ion carriers, that is, surfactant micelles, is essential for the elongation of long gold nanorods.

Chemical Transformation of Nanorods to Nanowires: Reversible Growth and Dissolution of Anisotropic Gold Nanostructures

This manuscript describes a reversible wet chemical process for the tip-selective one-dimensional (1D) growth and dissolution of gold nanorods (AuNRs) and gold nanowires (AuNWs). Tip-selective dissolution was achieved by oxidation of AuNRs with a Au(III)/CTAB complex, whereas the growth of AuNRs was carried out by the reduction of Au(I) ions on the AuNR surface with a mild reducing agent, ascorbic acid (AA). Both the dissolution and growth processes are highly tip selective and proceed exclusively in one dimension. A decrease in the aspect ratio (AR) of AuNRs during the dissolution resulted in a blue shift in the longitudinal plasmon band (LPB) position, and red shifts in the LPB position were achieved by increasing the AR by 1D growth of AuNRs. Both growth and dissolution processes are fully controllable and can be stopped and resumed at any given time when the desired AR and/or LPB position is achieved. In addition, the tip-selective 1D growth of AuNRs can be continued with the additional supply of Au(I)/CTAB/AA solution to produce extremely long AuNWs.

Morphology-controlled copper nanowire synthesis and magnetic field assisted self-assembly

Morphology, dimensions, crystalline structure and compositions of nanomaterials are very critical in determining their unique characteristics. Here we report how the reducing agent concentration affects the surface morphology of copper nanowires and establish the optimized reaction conditions to synthesize high aspect ratio nanowires with a smooth surface. Also, reported is the magnetic field assisted technique to control the orientational and positional ordering of cupronickel nanowires (Cu/Ni NWs) on a large-scale area. A combination of magnetic field, surface derivatization and photolithographic techniques allowed self-assembly of Cu/Ni NWs into channels. The channel resistance as a function of the applied magnetic field during fabrication shows an anomalous decrease owing to the positional end-to-end alignment of NWs. Magnetic field and areal NW density dependence of NW sheet resistance in channels is presented and analyzed using scaling theoretical models.

Ultrafast measurements of the dynamics of single nanostructures: a review

The ability to study single particles has revolutionized nanoscience. The advantage of single particle spectroscopy measurements compared to conventional ensemble studies is that they remove averaging effects from the different sizes and shapes that are present in the samples. In time-resolved experiments this is important for unraveling homogeneous and inhomogeneous broadening effects in lifetime measurements. In this report, recent progress in the development of ultrafast time-resolved spectroscopic techniques for interrogating single nanostructures will be discussed. The techniques include far-field experiments that utilize high numerical aperture (NA) microscope objectives, near-field scanning optical microscopy (NSOM) measurements, ultrafast electron microscopy (UEM), and time-resolved x-ray diffraction experiments. Examples will be given of the application of these techniques to studying energy relaxation processes in nanoparticles, and the motion of plasmons, excitons and/or charge carriers in different types of nanostructures.

Alloying-induced spin Seebeck effect and spin figure of merit in Pt-based bimetallic atomic wires of noble metals

The chemical potential of electrodes can be tuned to generate pure thermal spin voltages in certain bimetallic wires of noble metals.

Size-Dependent Grain-Boundary Structure with Improved Conductive and Mechanical Stabilities in Sub-10-nm Gold Crystals

Low-angle grain boundaries generally exist in the form of dislocation arrays, while high-angle grain boundaries (misorientation angle >15°) exist in the form of structural units in bulk metals. Here, through in situ atomic resolution aberration corrected electron microscopy observations, we report size-dependent grain-boundary structures improving both stabilities of electrical conductivity and mechanical properties in sub-10-nm-sized gold crystals. With the diameter of a nanocrystal decreasing below 10 nm, the high-angle grain boundary in the crystal exists as an array of dislocations. This size effect may be of importance to a new generation of interconnects applications.

Mechanically Assisted Self-Healing of Ultrathin Gold Nanowires

As the critical feature sizes of integrated circuits approaching sub-10 nm, ultrathin gold nanowires (diameter <10 nm) have emerged as one of the most promising candidates for next-generation interconnects in nanoelectronics. Also due to their ultrasmall dimensions, however, the structures and morphologies of ultrathin gold nanowires are more prone to be damaged during practical services, for example, Rayleigh instability can significantly alter their morphologies upon Joule heating, hindering their applications as interconnects. Here, it is shown that upon mechanical perturbations, predamaged, nonuniform ultrathin gold nanowires can quickly recover into uniform diameters and restore their smooth surfaces, via a simple mechanically assisted self-healing process. By examining the local self-healing process through in situ high-resolution transmission electron microscopy, the underlying mechanism is believed to be associated with surface atomic diffusion as evidenced by molecular dynamics simulations. In addition, mechanical manipulation can assist the atoms to overcome the diffusion barriers, as suggested by ab initio calculations, to activate more surface adatoms to diffuse and consequently speed up the self-healing process. This result can provide a facile method to repair ultrathin metallic nanowires directly in functional devices, and quickly restore their microstructures and morphologies by simple global mechanical perturbations.

Ultrasonication-assisted synthesis of high aspect ratio gold nanowires on a graphene template and investigation of their growth mechanism

We report a facile synthesis of Au nanowires (AuNWs) with a high aspect ratio (l/D) of up to 5000 on a plasma activated graphene template with ultrasound assistance. We demonstrate that the ultrasonication induced symmetry breaking of Au clusters facilitates the growth of AuNWs from the embryonic stages. Furthermore, the growth mechanism of AuNWs is systematically investigated using high resolution electron transmission microscopy (HRTEM), which reveals the unique role of the defective graphene template in directing the growth of AuNWs.

Seed-Mediated Growth of Colloidal Metal Nanocrystals

Seed-mediated growth is a powerful and versatile approach for the synthesis of colloidal metal nanocrystals. The vast allure of this approach mainly stems from the staggering degree of control one can achieve over the size, shape, composition, and structure of nanocrystals. These parameters not only control the properties of nanocrystals but also determine their relevance to, and performance in, various applications. The ingenuity and artistry inherent to seed-mediated growth offer extensive promise, enhancing a number of existing applications and opening the door to new developments. This Review demonstrates how the diversity of metal nanocrystals can be expanded with endless opportunities by using seeds with well-defined and controllable internal structures in conjunction with a proper combination of capping agent and reduction kinetics. New capabilities and future directions are also highlighted.

Solution-Grown Silver Nanowire Ordered Arrays as Transparent Electrodes

A transparent conducting film composed of regular networks of silver nanowires is obtained by combining a soft solution process (Tollens' reaction) and nanoimprint lithography. The solution-grown nanowire networks show a threefold higher conductivity than grids obtained by metal evaporation. This is due to the larger grain size in the solution-grown nanowires, which results in a strong reduction of electron scattering by grain boundaries.

Vapor-phase preparation of single-crystalline thin gold microplates using HAuCl4 as the precursor for plasmonic applications

Vapor-phase preparation of single-crystalline thin gold microplates and their application in defining high-quality plasmonic nanostructures.

Mask-Free Patterning of High-Conductivity Metal Nanowires in Open Air by Spatially Modulated Femtosecond Laser Pulses

A novel high-resolution nanowire fabrication method is developed by thin-film patterning using a spatially modulated femtosecond laser pulse. Deep subwavelength (≈1/13 of the laser wavelength) and high conductivity (≈1/4 of the bulk gold) nanowires are fabricated in the open air without using masks, which offers a single-step arbitrary direct patterning approach for electronics, plasmonics, and optoelectronics nanodevices.

Copper nanowires as nanoscale interconnects: their stability, electrical transport, and mechanical properties

Application of copper nanowires (Cu NWs) for interconnects in future nanodevices must meet the following needs: environmental stability and superior electrical transport properties. Here, we demonstrate a kind of Cu NW that possesses the both properties. The Cu NWs were synthesized through a hydrothermal route with the reduction of copper chloride using octadecylamine (ODA). The reasons for their environmental stability could be due to interaction of ODA(+) molecules with the surface of Cu NWs and forming strong N-Cu chemical bonds. Electrical transport properties of individual Cu NW were investigated by using the four-probe measurement, showing the temperature-dependent resistance of the Cu NW was fairly linear in the temperature range from 25 to 300 K and the Cu NW retained the low resistivity of approximately 3.5 × 10(-6) Ω · cm at room temperature, near the resistivity value of bulk copper. The maximum transport current density for the Cu NW should be superior to 1.06 × 10(7) A · cm(-2). In addition, the Cu NWs have ultralow junction resistance. The present study indicates that the Cu NWs could act as a multifunctional building blocks for interconnects in future nanoscale devices.

Cyanide-free preparation of gold nanowires: controlled crystallinity, crystallographic orientation and enhanced field emission

Gold nanowires with controlled crystallinity and preferred crystallographic orientations have been fabricated in ion track-etched templates using a cyanide-free bath.

Comparative analysis of the electronic structures of mono- and bi-atomic chains of IV, III–V and II–VI group elements calculated using the DFT LCAO and LACW methods

Ab initio non-relativistic LCAO and relativistic LACW methods are used to calculate the electronic properties of the covalent and partially ionic ANB8−N atomic chains. Their band structures are found to be markedly different when using both methods.

One-pot synthesis of long twin gold nanorods in a gelled surfactant solution

A new one-pot synthesis method was developed for producing long twin gold nanorods with lengths of ca. 1755 nm, which have the potential to be arranged on a substrate using anisotropic surface modification.

Metal nanowire networks: the next generation of transparent conductors

There is an ongoing drive to replace the most common transparent conductor, indium tin oxide (ITO), with a material that gives comparable performance, but can be coated from solution at speeds orders of magnitude faster than the sputtering processes used to deposit ITO. Metal nanowires are currently the only alternative to ITO that meets these requirements. This Progress Report summarizes recent advances toward understanding the relationship between the structure of metal nanowires, the electrical and optical properties of metal nanowires, and the properties of a network of metal nanowires. Using the structure-property relationship of metal nanowire networks as a roadmap, this Progress Report describes different synthetic strategies to produce metal nanowires with the desired properties. Practical aspects of processing metal nanowires into high-performance transparent conducting films are discussed, as well as the use of nanowire films in a variety of applications.

Characterization of conductive nanobiomaterials derived from viral assemblies by low-voltage STEM imaging and Raman scattering

New technologies require the development of novel nanomaterials that need to be fully characterized to achieve their potential. High-resolution low-voltage scanning transmission electron microscopy (STEM) has proven to be a very powerful technique in nanotechnology, but its use for the characterization of nanobiomaterials has been limited. Rotavirus VP6 self-assembles into nanotubular assemblies that possess an intrinsic affinity for Au ions. This property was exploited to produce hybrid nanobiomaterials by the in situ functionalization of recombinant VP6 nanotubes with gold nanoparticles. In this work, Raman spectroscopy and advanced analytical electron microscopy imaging with spherical aberration-corrected (Cs) STEM and nanodiffraction at low-voltage doses were employed to characterize nanobiomaterials. STEM imaging revealed the precise structure and arrangement of the protein templates, as well as the nanostructure and atomic arrangement of gold nanoparticles with high spatial sub-Angstrom resolution and avoided radiation damage. The imaging was coupled with backscattered electron imaging, ultra-high resolution scanning electron microscopy and x-ray spectroscopy. The hybrid nanobiomaterials that were obtained showed unique properties as bioelectronic conductive devices and showed enhanced Raman scattering by their precise arrangement into superlattices, displaying the utility of viral assemblies as functional integrative self-assembled nanomaterials for novel applications.

Subcellular neural probes from single-crystal gold nanowires

Size reduction of neural electrodes is essential for improving the functionality of neuroprosthetic devices, developing potent therapies for neurological and neurodegenerative diseases, and long-term brain–computer interfaces. Typical neural electrodes are micromanufactured devices with dimensions ranging from tens to hundreds of micrometers. Their further miniaturization is necessary to reduce local tissue damage and chronic immunological reactions of the brain. Here we report the neural electrode with subcellular dimensions based on single-crystalline gold nanowires (NWs) with a diameter of ∼100 nm. Unique mechanical and electrical properties of defect-free gold NWs enabled their implantation and recording of single neuron-activities in a live mouse brain despite a ∼50× reduction of the size compared to the closest analogues. Reduction of electrode dimensions enabled recording of neural activity with improved spatial resolution and differentiation of brain activity in response to different social situations for mice. The successful localization of the epileptic seizure center was also achieved using a multielectrode probe as a demonstration of the diagnostics potential of NW electrodes. This study demonstrated the realism of single-neuron recording using subcellular-sized electrodes that may be considered a pivotal point for use in diverse studies of chronic brain diseases.

CuGeO₃ nanowires covered with graphene as anode materials of lithium ion batteries with enhanced reversible capacity and cyclic performance

A facile one-step route was developed to synthesize crystalline CuGeO₃ nanowire/graphene composites (CGCs). Crystalline CuGeO₃ nanowires were tightly covered and anchored by graphene sheets, forming a layered structure. Subsequently, CGCs were exploited as electrode materials for lithium ion batteries (LIBs). The reversible formation of Li₂O buffer layer and elastic graphene sheets accommodated the volume change during the charge and discharge processes. CGC containing 37 wt% graphene exhibited a superior electrochemical performance, that is, a remarkable reversible capacity (1265 mA h g(-1) for the first cycle), an outstanding cyclic performance (853 mA h g(-1) after 50 cycles under a current density of 200 mA g(-1)), a high coulombic efficiency, and an excellent rate capability. Clearly, CGCs may stand out as a promising anode material for LIBs.

Encapsulated annealing: enhancing the plasmon quality factor in lithographically-defined nanostructures

Lithography provides the precision to pattern large arrays of metallic nanostructures with varying geometries, enabling systematic studies and discoveries of new phenomena in plasmonics. However, surface plasmon resonances experience more damping in lithographically–defined structures than in chemically–synthesized nanoparticles of comparable geometries. Grain boundaries, surface roughness, substrate effects, and adhesion layers have been reported as causes of plasmon damping, but it is difficult to isolate these effects. Using monochromated electron energy–loss spectroscopy (EELS) and numerical analysis, we demonstrate an experimental technique that allows the study of these effects individually, to significantly reduce the plasmon damping in lithographically–defined structures. We introduce a method of encapsulated annealing that preserves the shape of polycrystalline gold nanostructures, while their grain-boundary density is reduced. We demonstrate enhanced Q–factors in lithographically–defined nanostructures, with intrinsic damping that matches the theoretical Drude damping limit.

In situ electron microscopy four-point electromechanical characterization of freestanding metallic and semiconducting nanowires

Electromechanical coupling is a topic of current interest in nanostructures, such as metallic and semiconducting nanowires, for a variety of electronic and energy applications. As a result, the determination of structure-property relations that dictate the electromechanical coupling requires the development of experimental tools to perform accurate metrology. Here, a novel micro-electro-mechanical system (MEMS) that allows integrated four-point, uniaxial, electromechanical measurements of freestanding nanostructures in-situ electron microscopy, is reported. Coupled mechanical and electrical measurements are carried out for penta-twinned silver nanowires, their resistance is identified as a function of strain, and it is shown that resistance variations are the result of nanowire dimensional changes. Furthermore, in situ SEM piezoresistive measurements on n-type, [111]-oriented silicon nanowires up to unprecedented levels of ∼7% strain are demonstrated. The piezoresistance coefficients are found to be similar to bulk values. For both metallic and semiconducting nanowires, variations of the contact resistance as strain is applied are observed. These variations must be considered in the interpretation of future two-point electromechanical measurements.

Influence of cross sectional geometry on surface plasmon polariton propagation in gold nanowires

We investigated the effects of cross sectional geometry on surface plasmon polariton propagation in gold nanowires (NWs) using bleach-imaged plasmon propagation and electromagnetic simulations. Chemically synthesized NWs have pentagonally twinned crystal structures, but recent advances in synthesis have made it possible to amplify this pentagonal shape to yield NWs with a five-pointed-star cross section and sharp end tips. We found experimentally that NWs with a five-pointed-star cross section, referred to as SNWs, had a shorter propagation length for surface plasmon polaritons at 785 nm, but a higher effective incoupling efficiency compared to smooth NWs with a pentagonal cross section, labeled as PNWs. Electromagnetic simulations revealed that the electric fields were localized at the sharp ridges of the SNWs, leading to higher absorptive losses and hence shorter propagation lengths compared to PNWs. On the other hand, scattering losses were found to be relatively uncorrelated with cross sectional geometry, but were strongly dependent on the plasmon mode excited. Our results provide insight into the shape-dependent waveguiding properties of chemically synthesized metal NWs and the mode-dependent loss mechanisms that govern surface plasmon polariton propagation.

Self-assembly of copper sulfide nanoparticles into nanoribbons with continuous crystallinity

Copper chalcogenide nanoparticles (NPs) represent a promising material for solar energy conversion, electrical charge storage, and plasmonic devices. However, it is difficult to achieve high-quality NP dispersions in experimentally convenient and technologically preferred aqueous media. Also problematic is the transition from NP dispersion to continuously crystalline nanoscale materials, for instance, nanowires, nanoribbons, or similar high aspect ratio nano/microstructures capable of charge transport necessary for such applications. All previous examples of copper sulfide assemblies contained insulating gaps between NPs. Here we show that aqueous synthesis of high-quality monodispersed high-chalcocite β-Cu2S NPs, with sizes from 2 to 10 nm, is possible. When reaction time increased, the NP shape evolved from nearly spherical particles into disks with predominantly hexagonal shape. Moreover, the monodispersed β-Cu2S NPs were found to spontaneously self-assemble into nanochains and, subsequently, to nanoribbons. The width and length of the nanoribbons were 4-20 nm and 50-950 nm, respectively, depending on the assembly conditions. We observed the formation of the nanoribbons with continuous crystal lattice and charge transport pathways, making possible the utilization of self-assembly processes in the manufacturing of photovoltaic, plasmonic, and charge storage devices.

Why single-beam optical tweezers trap gold nanowires in three dimensions

Understanding whether noble-metal nanostructures can be trapped optically and under what conditions will enable a range of applications that exploit their plasmonic properties. However, there are several nontrivial issues that first need to be resolved. A major one is that metal particles experience strong radiation pressure in optical beams, while stable optical trapping requires an attractive force greater than this radiation pressure. Therefore, it has generally been considered impossible to obtain sufficiently strong gradient forces using single-beam optical tweezers to trap relatively large metal nanostructures in three dimensions. Here we demonstrate that a single, tightly focused laser beam with a wavelength of 800 nm can achieve three-dimensional optical trapping of individual gold (Au) nanowires with lengths over 2 μm. Nanowires can be trapped by the beam at one of their ends, in which case they undergo significant angular fluctuations due to Brownian motion of the untrapped end. They can also be trapped close to their midpoints, in which case they are oriented approximately perpendicular to the light polarization direction. The behavior is markedly different from that of Ag nanowires with similar length and diameter, which cannot be trapped in three dimensions by a single focused Gaussian beam. Our results, including electrodynamics simulations that help to explain our experimental findings, suggest that the conventional wisdom, which holds that larger metal particles cannot be trapped, needs to be replaced with an understanding based on the details of plasmon resonances in the particles.

Nano-storage wires

We report the development of "nano-storage wires" (NSWs), which can store chemical species and release them at a desired moment via external electrical stimuli. Here, using the electrodeposition process through an anodized aluminum oxide template, we fabricated multisegmented nanowires composed of a polypyrrole segment containing adenosine triphosphate (ATP) molecules, a ferromagnetic nickel segment, and a conductive gold segment. Upon the application of a negative bias voltage, the NSWs released ATP molecules for the control of motor protein activities. Furthermore, NSWs can be printed onto various substrates including flexible or three-dimensional structured substrates by direct writing or magnetic manipulation strategies to build versatile chemical storage devices. Since our strategy provides a means to store and release chemical species in a controlled manner, it should open up various applications such as drug delivery systems and biochips for the controlled release of chemicals.

Seed-mediated growth of ultralong gold nanorods and nanowires with a wide range of length tunability

This study reports a systematic approach to synthesize ultralong gold nanorods and nanowires using a seed-mediated growth approach. In the first series, the effect of growth solution pH on the lengths of nanorods prepared was investigated. Interestingly, although shorter rods (230-310 nm) were produced in a basic solution environment than in an acidic condition (330-410 nm), the nanorod yield is greatly improved with relatively few nanoplate byproducts formed. Nanorod growth proceeds quickly in a basic solution as evidenced by the fast solution color changes. By adjusting several experimental parameters with the aim to elongate the nanorod length in a tunable fashion, gold nanorods and nanowires with average lengths from 580 to 2850 nm can be synthesized by progressively increasing the HNO3 concentration in the final growth solution. Nanowire growth in a highly acidic solution is slower, and a substantially longer time is needed to reach long lengths. Further extension of the nanowire length can be achieved simply by reducing the volume of second growth solution transferred to the final growth solution. Nanorods and nanowires with lengths spanning from 700 nm to 4.5 μm were prepared in this series of experimental conditions. The longest nanowires can reach a length of up to 6 μm. The nanowires still maintain thin average diameters of 33-53 nm. The ability to make gold nanorods and nanowires over this exceptionally wide and useful length range is exciting because applications and demonstrations using ultralong gold nanorods and nanowires of most suitable lengths are now possible.