ZnS nanostructure arrays: a developing material star

Nano-Zinc Sulfide Modified 3D Reconstructed Zinc Anode with Induced Deposition Effect Assists Long-Cycle Stable Aqueous Zinc Ion Battery

Aqueous zinc ion batteries are often adversely affected by the poor stability of zinc metal anodes. Persistent water-induced side reactions and uncontrolled dendrite growth have seriously damaged the long-term service life of aqueous zinc ion batteries. In this paper, it is reported that a zinc sulfide with optimized electron arrangement on the surface of zinc anode is used to modify the zinc anode to achieve long-term cycle stability of zinc anode. The effective active sites of the zinc metal anode surface are first significantly improved by a simple ultrasound-assisted etching strategy, and then the in situ zinc sulfide interface phase further guides the zinc ion deposition behavior on the surface of the zinc metal anode. The zinc sulfide protective layer well regulates the interfacial electric field and the migration of Zn2+, thereby significantly promoting the homogenization of zinc ion flux to achieve dendrite-free deposition. In addition, the aqueous zinc ion full cell assembled based on ZnS@3D-Zn anode achieves better output performance in long-term cycles. In summary, this work sheds light on the importance of reasonable interfacial modification for the development of dendrite-free and stable zinc anode chemistry, which opens up a new path for promoting the development of zinc-based batteries.

Utilizing High X-ray Energy Photon-In Photon-Out Spectroscopies and X-ray Scattering to Experimentally Assess the Emergence of Electronic and Atomic Structure of ZnS Nanorods

The key to controlling the fabrication process of transition metal sulfide nanocrystals is to understand the reaction mechanism, especially the coordination of ligands and solvents during their synthesis. We utilize in situ high-energy resolution fluorescence detected X-ray absorption spectroscopy (HERFD-XAS) as well as in situ valence-to-core X-ray emission spectroscopy (vtc-XES) combined with density functional theory (DFT) calculations to identify the formation of a tetrahedral [Zn(OA)4]2+ and an octahedral [Zn(OA)6]2+ complex, and the ligand exchange to a tetrahedral [Zn(SOA)4]2+ complex (OA = oleylamine, OAS = oleylthioamide), during the synthesis of ZnS nanorods in oleylamine. We observe in situ the transition of the electronic structure of [Zn(SOA)4]2+ with a HOMO/LUMO gap of 5.0 eV toward an electronic band gap of 4.3 and 3.8 eV for 1.9 nm large ZnS wurtzite nanospheres and 2 × 7 nm sphalerite nanorods, respectively. Thus, we demonstrate how in situ multimodal X-ray spectroscopy and scattering studies can not only resolve structure, size, and shape during the growth and synthesis of NPs in organic solvents and at high temperature but also give direct information about their electronic structure, which is not readily accessible through other techniques.

Controllable synthesize of ZnS/PbS nanostructure and their structural and morphological properties

ZnS is an appealing material with wide potential applications in optoelectronics, sensors, and photocatalysis due to its fascinating properties, low cost, and eco-friendly. In this paper, we report the synthesis of ZnS nanowires and nanorods via a simple thermal-evaporation method using different concentrations of PbS as a dopant. The prepared nanostrutures were investigated in detalis using a scanning electron microscopy (SEM), X-ray diffraction (XRD), and high resolution transmission electron microscopy (HRTEM). The results show that the fabricated ZnS nanowire/nanorod has a wurtzite (hcp) structure. In addition, based on the experimental results, the growth mechanism of the prepared nanostructures is reported. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray (EDX) mapping analyses confirmed that the ZnS nanorods were stoichiometric without impurities or defects, whereas PbS quantum dots were formed inside the high-quality nanowires. The formation mechanism of ZnS nanowires is discussed based on the vapor-liquid-solid (VLS) growth model. Results demonstrated that thermal evaporation is a simple and effective techniques for producing high-quality heterostructured ZnS nanowires with potential applications in different fields.

Zinc and cadmium thioamidate complexes: rational design of single-source precursors for the AACVD of ZnS

A series of zinc(II) thioamidate complexes [Zn{SC(iPr)NR}2]n for R = iPr (n = 2) (2), tBu (3) (n = 1), Ph (4) (n = 2) and Cy (5) (n = 2) and one cadmium(II) thioamidate complex [Cd{SC(iPr)NtBu}2]3, (6), were designed and synthesised as single-source precursors for AACVD ZnS and CdS. Solid-state structures of all four zinc(II) compounds revealed distorted tetrahedral or trigonal bipyramidal geometries, with varying tendencies for dimeric association, mediated by {Zn-S} bridging bonds. The thermogravimetric analysis identified the {tBu} derivertive, 3, as the most promising precursor based on its low decomposition onset (118 °C) and clean conversion to ZnS. This was attributed to the greater availability of β-hydrogen atoms promoting the pyrolysis mechanism. The corresponding cadmium thioamide 6 was found to crystallise as a trimetallic molecule which lacked the thermal stability to be considered viable for AACVD. Hence, 3 was used to deposit ZnS thin films by AACVD at 200-300 °C. Powder X-ray diffraction confirmed phase-pure growth of hexagonal wurtzite ZnS, with approximate crystallite sizes of 15-20 nm. Scanning electron microscopy revealed densely packed spherical nanoclusters. The morphology and crystallinity were most consistent for depositions between 250-300 °C. Energy dispersive X-ray spectroscopy indicated slightly sulfur-deficient stoichiometries.

Immunomodulatory zinc-based materials for tissue regeneration

Zinc(Zn)-based materials have contributed greatly to the rapid advancements in tissue engineering. The qualities they possess that make them so beneficial include their excellent biodegradability, biocompatibility, anti-bacterial activity, among and several others. Biomedical materials that act as a foreign body, will inevitably cause host immune response when introduced to the human body. As the osteoimmunology develops, the immunomodulatory characteristics of biomaterials have become an appealing concept to improve implant-tissue interaction and tissue restoration. Recently, Zn-based materials have also displayed immunomodulatory functions, especially macrophage polarization states. It can promote the transformation of M1 macrophages into M2 macrophages to enhance the tissue regeneration and reconstruction. This review covers mainly Zn-based materials and their characteristics, including metallic Zn alloys and Zn ceramics. We highlight the current advancements in the type of immune responses, as well as the mechanisms, that are induced by Zn-based biomaterials, most importantly the regulation of innate immunity and the mechanism of promoting tissue regeneration. To this end, we discuss their applications in biomedicine, and conclude with an outlook on future research challenges.

Structural Morphology and Optical Properties of Strontium-Doped Cobalt Aluminate Nanoparticles Synthesized by the Combustion Method

The study of structural morphology and the optical properties of nanoparticles produced by combustion methods are gaining significance due to their multifold applications. In this regard, in the present work, the strontium-doped cobalt aluminate nanoparticles were synthesized by utilizing Co_1-xSr_xAl₂O₄ (0 ≤ x ≤ 0.5) L-Alanine as a fuel in an ignition cycle. Subsequently, several characterization studies viz., X-ray diffraction (XRD), energy-dispersive X-ray (EDX) analysis, high-resolution scanning electron microscopy (HRSEM), Fourier transform infrared spectroscopy (FTIR), ultraviolet (UV) spectroscopy and vibrating sample magnetometry (VSM) were accomplished to study the properties of the materials. The XRD analysis confirmed the cubic spinel structure, and the average crystallite size was found to be in the range of 14 to 20 nm using the Debye-Scherrer equation. High-resolution scanning electron microscopy was utilized to inspect the morphology of the Co_1-xSr_xAl₂O₄ (0 ≤ x ≤ 0.5) nanoparticles. Further, EDS studies were accomplished to determine the chemical composition. Kubelka-Munk's approach was used to determine the band gap, and the values were found to be in the range of 3.18-3.32 eV. The energy spectra for the nanoparticles were in the range of 560-1100 cm^-1, which is due to the spinel structure of Sr-doped CoAl₂O₄ nanoparticles. The behavior plots of magnetic induction (M) against the magnetic (H) loops depict the ferromagnetic behavior of the nanomaterials synthesized.

Interface characteristics of graphene/ZnS hybrid-dimensional heterostructures

Graphene/ZnS hybrid-dimensional heterostructure is an excellent combination to regulate and improve the conductivity and sensitivity of components, in which the interface effects have crucial impacts on the performance of devices. In this work, we investigate the interface characteristics of Graphene/ZnS 2D/3D heterostructures. X-ray photoelectron spectra show that the ZnS binding energy shifts to lower energy by 0.3 eV after forming heterojunction with graphene. The fluorescence and absorption spectra confirm the luminescence enhancement and blue-shift of the absorbance edge of ZnS caused by graphene. The composition of Graphene/ZnS heterostructure facilitates separation and transfer of spatial charges, resulting in rapid electron transport.

Bi2S3/ZnS heterostructures for H2S sensing in the dark: the synergy of increased surface-adsorbed oxygen and charge transfer

Bi2S3/ZnS heterostructures with increased surface-adsorbed oxygen and charge transfer in the dark were designed and used to achieve ppb level H2S detection at room temperature.

Al2O3 buffer-facilitated epitaxial growth of high-quality ZnO/ZnS core/shell nanorod arrays

II-VI semiconductor heterojunctions show huge potential for application in nanodevice fabrication due to their type-II alignments owing to the better spatial separation of electrons and holes. However, the hetero-epitaxial growth of high-quality heterostructures is still a challenge, especially for materials with large lattice mismatch. In this work, well-aligned single-crystalline ZnO/ZnS core/shell nanorod arrays were obtained by introducing an Al2O3 buffer layer. It is interesting that the nature of the ZnS layer varies with the thickness of the Al2O3 layer. When Al2O3 is less than 2 nm, the interaction between the substrate and epilayer is strong enough to penetrate through the buffer layer, enabling the growth of ZnS on Al2O3-coated ZnO nanorod arrays. On the basis of detailed characterization, a rational growth mechanism of the core/shell heterostructure is proposed, in which the Al2O3 interlayer can eliminate voids due to the Kirkendall effect around the interface and accommodate a misfit dislocation between the inner ZnO and outer ZnS, resulting in more sufficient strain relaxation in the epitaxy. In addition, cathodoluminescence measurements demonstrate that the optical properties of the ZnO/ZnS heterostructure could be effectively improved by taking advantage of the thin Al2O3. The I-V curves characterized by PeakForce tunneling atomic force microscopy reveal that the heterostructure shows a typical rectifying behavior and good photoresponse to ultraviolet light. These findings may provide a reasonable and effective strategy for the growth of highly lattice-mismatched heterostructure arrays buffered by the Al2O3 layer, broadening the options for fabricating heterojunctions and promoting their applications in optoelectronic devices.

Self-Assembly of Ferrocenyl Phenylalanine into Nanohelical Arrays via Kinetic Control

The spontaneous alignment of self-assembled chiral nanostructures at macroscopic scales is appealing because of their unique structural features and physicochemical properties. Here we present the construction of highly ordered bioorganometallic nanohelical arrays on the basis of the hierarchical chiral self-assembly of the simple ferrocenyl l-phenylalanine (Fc-l-F). The formation of nanohelical arrays is under kinetic control, which can be controlled by changing the growth time and the vapor temperature. The chiral nanoarrays can generate circularly polarized luminescence by the incorporation of fluorescent dyes. Moreover, due to the redox activity of the Fc moiety, the nanohelical arrays show enhanced electrical capacity compared with previously reported peptide nanomaterials. The results shed light on the highly ordered chiral self-assembled nanomaterials, which have potential applications in fields of optics, sensing, and energy storage.

Dithiocarbamate Complexes as Single Source Precursors to Nanoscale Binary, Ternary and Quaternary Metal Sulfides

Nanodimensional metal sulfides are a developing class of low-cost materials with potential applications in areas as wide-ranging as energy storage, electrocatalysis, and imaging. An attractive synthetic strategy, which allows careful control over stoichiometry, is the single source precursor (SSP) approach in which well-defined molecular species containing preformed metal-sulfur bonds are heated to decomposition, either in the vapor or solution phase, resulting in facile loss of organics and formation of nanodimensional metal sulfides. By careful control of the precursor, the decomposition environment and addition of surfactants, this approach affords a range of nanocrystalline materials from a library of precursors. Dithiocarbamates (DTCs) are monoanionic chelating ligands that have been known for over a century and find applications in agriculture, medicine, and materials science. They are easily prepared from nontoxic secondary and primary amines and form stable complexes with all elements. Since pioneering work in the late 1980s, the use of DTC complexes as SSPs to a wide range of binary, ternary, and multinary sulfides has been extensively documented. This review maps these developments, from the formation of thin films, often comprised of embedded nanocrystals, to quantum dots coated with organic ligands or shelled by other metal sulfides that show high photoluminescence quantum yields, and a range of other nanomaterials in which both the phase and morphology of the nanocrystals can be engineered, allowing fine-tuning of technologically important physical properties, thus opening up a myriad of potential applications.

Understanding the role of zinc dithiocarbamate complexes as single source precursors to ZnS nanomaterials

Zinc sulfide is an important wide-band gap semi-conductor and dithiocarbamate complexes [Zn(S2CNR2)2] find widespread use as single-source precursors for the controlled synthesis of ZnS nanoparticulate modifications. Decomposition of [Zn(S2CNiBu2)2] in oleylamine gives high aspect ratio wurtzite nanowires, the average length of which was increased upon addition of thiuram disulfide to the decomposition mixture. To provide further insight into the decomposition process, X-ray absorption spectroscopy (XAS) of [Zn(S2CNMe2)2] was performed in the solid-state, in non-coordinating xylene and in oleylamine. In the solid-state, dimeric [Zn(S2CNMe2)2]2 was characterised in accord with the single crystal X-ray structure, while in xylene this breaks down into tetrahedral monomers. In situ XAS in oleylamine (RNH2) shows that the coordination sphere is further modified, amine binding to give five-coordinate [Zn(S2CNMe2)2(RNH2)]. This species is stable to ca. 70 °C, above which amine dissociates and at ca. 90 °C decomposition occurs to generate ZnS. The relatively low temperature onset of nanoparticle formation is associated with amine-exchange leading to the in situ formation of [Zn(S2CNMe2)(S2CNHR)] which has a low temperature decomposition pathway. Combining these observations with the previous work of others allows us to propose a detailed mechanistic scheme for the overall process.

Synthesis, structure and optimized field emission properties of highly oriented ZnO/Pt core–shell nanorods on a Zn substrate

The current density of as-fabricated Pt15/ZnO NR emitters was about 1900 times that of the bare ZnO emitters.

Phase-dependent structural, optical, phonon and UV sensing properties of ZnS nanoparticles

In order to investigate the influence of crystal structure on the photoresponse properties of ZnS nanoparticles under UV light exposure, electrical measurements on polyvinylpyrrolidone capepd cubic and hexagonal ZnS nanoparticles with average particle size 30-40 nm have been successfully carried out. Low-temperature solvothermal synthesis yields pure and highly crystalline w-ZnS nanoparticles with good stability. Different structures of prepared ZnS nanoparticles have been identified and confirmed with powder x-ray diffraction, high-resolution field-emission transmission electron microscopy and non-resonant Raman spectroscopic techniques, respectively. The energy band gap and emission properties of cubic and hexagonal ZnS have been studied using UV-vis absorption and photoluminescence spectroscopy. The interaction of phonons with free carriers and transport properties has a vital influence on the electronic and optical properties of nanomaterials. Hence, the resonant and non-resonant Raman spectral studies have been carried out for the prepared samples. Studies on the I-V characteristics and the mechanism behind the enhancement of photocurrent for the cubic and hexagonal ZnS nanoparticle-based photodetectors have shown an enhanced photocurrent for hexagonal ZnS nanoparticles rather than the cubic.

Structural and Optical Characterization of ZnS Ultrathin Films Prepared by Low-Temperature ALD from Diethylzinc and 1.5-Pentanedithiol after Various Annealing Treatments

The structural and optical evolution of the ZnS thin films prepared by atomic layer deposition (ALD) from the diethylzinc (DEZ) and 1,5-pentanedithiol (PDT) as zinc and sulfur precursors was studied. A deposited ZnS layer (of about 60 nm) is amorphous, with a significant S excess. After annealing, the stoichiometry improved for annealing temperatures ≥400 °C and annealing time ≥2 h, and 1:1 stoichiometry was obtained when annealed at 500 °C for 4 h. ZnS crystallized into small crystallites (1–7 nm) with cubic sphalerite structure, which remained stable under the applied annealing conditions. The size of the crystallites (D) tended to decrease with annealing temperature, in agreement with the EDS data (decreased content of both S and Zn with annealing temperature); the D for samples annealed at 600 °C (for the time ≤2 h) was always the smallest. Both reflectivity and ellipsometric spectra showed characteristics typical for quantum confinement (distinct dips/peaks in UV spectral region). It can thus be concluded that the amorphous ZnS layer obtained at a relatively low temperature (150 °C) from organic S precursor transformed into the layers built of small ZnS nanocrystals of cubic structure after annealing at a temperature range of 300–600 °C under Ar atmosphere.

Diameter- and Length-controlled Synthesis of Ultrathin ZnS Nanowires and Their Size-Dependent UV Absorption Properties, Photocatalytical Activities and Band-Edge Energy Levels

Benefiting from their ultra-small diameters and highly structural anisotropies, ultrathin semiconductor nanowires (USNWs) are well-known for their fascinating physical/chemical properties, as well as their promising applications in various fields. However, until now, it remains a challenge to synthesize high-quality USNWs with well-controlled diameters and lengths, let alone the exploration of their size-dependent properties and applications. To solve such a challenge, we report herein a ligand-induced low-temperature precursor thermolysis route for the controlled preparation of ultrathin ZnS nanowires, which is based on the oriented assembly of the in-situ formed ZnS clusters/tiny particles. Optimized synthetic conditions allowed the synthesis of ZnS nanowires with a diameter down to 1.0 nm and a length approaching 330 nm. The as-prepared ultrathin ZnS nanowires were then intensively examined by morphological, spectroscopic and electrochemical analytical means to explore their size-dependent optical absorption properties, photocatalytic activities and band-edge energy levels, as well as their underlying growth mechanism. Notably, these USNWs, especially for the thinnest nanowires, were identified to possess an excellent performance in both the selective absorption of ultraviolet (UV) light and photocatalytic degradation of dyes, thus enabling them to serve as longpass ultraviolet filters and high-efficiency photocatalysts, respectively. For the ultrathin ZnS nanowires with a diameter of 1.0 nm, it was also interesting to observe that their exciton absorption peak positions were kept almost unchanged during the continuous extension of their lengths, which has not been reported previously.

Thermal Evolution of ZnS Nanostructures: Effect of Oxidation Phenomena on Structural Features and Photocatalytical Performances

ZnS nanosystems are being extensively studied for their possible use in a wide range of technological applications. Recently, the gradual oxidation of ZnS to ZnO was exploited to tune their structural, electronic, and functional properties. However, the inherent complexity and size dependence of the ZnS oxidation phenomena resulted in a very fragmented description of the process. In this work, different-sized nanosystems were obtained through two different low temperature wet chemistry routes, namely, hydrothermal and inverse miniemulsion approaches. These protocols were used to obtain ZnS samples consisting of 21 and 7 nm crystallites, respectively, to be used as reference material. The obtained samples were then calcinated at different temperatures, ranging from 400 to 800 °C toward the complete oxidation of ZnO, passing through the coexistence of the two phases (ZnS/ZnO). A thorough comparison of the effects of thermal handling on ZnS structural, chemical, and functional evolution was carried out by TEM, XRD, XAS, XPS, Raman, FT-IR, and UV-Vis. Finally, the photocatalytic activity in the H₂ evolution reaction was also compared for selected ZnS and ZnS/ZnO samples. A correlation between size and the oxidation process was observed, as the smaller nanosystems showed the formation of ZnO at lower temperature, or in a larger amount in the case of the ZnS and ZnO co-presence. A difference in the underlying mechanism of the reaction was also evidenced. Despite the ZnS/ZnO mixed samples being characterized by an increased light absorption in the visible range, their photocatalytic activity was found to be much lower.

One-dimensional nanostructures of II-VI ternary alloys: synthesis, optical properties, and applications

One-dimensional (1D) nanostructures of II-VI ternary alloys are of prime interest due to their compatible features of both 1D nanostructures and semiconducting alloys. These features can facilitate materials with tunable bandgaps, which are crucial to the performance of photoelectrical devices. Herein, we present a comprehensive review summarizing the recent research progress pertinent to the diverse synthesis, optical fundamentals and applications of 1D nanostructures of II-VI ternary alloys. Considering multifunctional applications, the different growth mechanisms of the rational design and synthesis techniques are highlighted. Investigations of the fundamentals of the optical and photoelectrical properties of ternary alloyed II-VI semiconductors via the corresponding characterization techniques are also particularly discussed. Furthermore, we present the versatile potential practical applications of these materials. Finally, we extend the discussion to the most recent research advances on quaternary alloys, which provides a possible prospective forecast for the sustained development of alloyed 1D nanostructures.

Structurally colored polymer films with narrow stop band, high angle-dependence and good mechanical robustness for trademark anti-counterfeiting

The photonic stop bands of colloidal crystals appear as structural colors, which are potentially useful for display devices, colorimetric sensors, optical filters, paints, and photonic papers. However, low durability and pale colors caused by the undesired scattering of light seriously limit their practical applications. In this article, a polydimethylsiloxane (PDMS)/photonic crystal (PC)/PDMS sandwich structure was designed as a free standing structural colored film with good durability and brilliant color. The monodispersed polystyrene (PS) spheres were self-assembled on the hydrophobic PDMS surface to facilitate the integrity of the assembled structure and then, PDMS with a refractive index of 1.41 was filled in the gaps between the PS spheres (nPS = 1.59), replacing air (nair = 1). The surface was finally covered with a thin layer of PS PCs, forming a continuous and free standing PC film. The continuous feature of the composite PC can greatly improve their mechanical properties. At the same time, the lower index contrast results in narrow reflection peaks for the composite films, which indicates that higher color purity and brightness could be achieved. Clearly distinguished, vivid structural colors can be observed between red to green or green to blue by tuning the viewing angle from 5° to 50° for films composed of PS spheres with diameters of 247 nm or 209 nm, respectively. They can also be easily patterned by spraying methods and embedded as a trademark on clothes. Patterns with different structural colors at different angle can be clearly be observed under sunlight, which makes them potentially useful as security materials.

The Study of Near-Band-Edge Property in Oxygen-Incorporated ZnS for Acting as an Efficient Crystal Photocatalyst

A wide gap semiconductor material has attracted attention as a heterophotocatalyst because of its light harvesting nature to be used in alternative energy production for the next generation. We, herein, grow and synthesize ZnS_(1-x)O _x series compounds using the chemical vapor transport (CVT) method with I₂ serving as the transport agent. Different crystals, such as undoped ZnS and oxygen-doped ZnS_0.94O_0.06 and ZnS_0.88O_0.12, revealed different bright palette emissions that were presented in photoluminescence spectra in our previous report. To study the electron-hole pair interaction of this sample series, the near-band-edge transitions of the sample series were characterized in detail by photoconductivity (PC) experiments. Additional results from surface photovoltage (SPV) spectra also detected the surface and defect-edge transitions from the higher oxygen-doped ZnS crystals. PC measurement results showed a red-shift in the bandgap with increasing incorporation of oxygen on ZnS. Consequently, the samples were subjected to photoirradiation by xenon lamp for the degradation of methylene blue (MNB) by acting as heterophotocatalysts. Undoped ZnS emerged as the best photocatalyst candidate with the fastest rate constant value of 0.0277 min^-1. In cubic {111} ZnS [{111} c-ZnS], the polarized Zn⁺ → S^- ions may play a vital role as a photocatalyst because of their strong electron-hole polarization, which leads to the mechanism for degradation of the MNB solution.

Effect of synthesis conditions on the morphology and field-emission properties of hydrothermally grown Zn-doped SnO2 nanorods

Zn–SnO₂ nanorod arrays with various sizes and aspect ratios on a Cu substrate have been achieved and the sword-like nanorod arrays have the lowest E_on of ∼2.75 V μm⁻¹ and the highest β of ∼1970.

The behavior of Ni nanotubes under the influence of environments with different acidities

The results of research on the behavior of Ni nanotubes under the influence of environments with different pH values are presented.

One-step fabrication of single-crystalline ZnS nanotubes with a novel hollow structure and large surface area for photodetector devices

ZnS nanotubes (NTs) were successfully prepared via a one-step thermal evaporation process without using any templates. The resulting NTs were single crystalline and structurally uniform. Based on experimental analysis, a tube-growth vapor-liquid-solid process was proposed as the growth mechanism of ZnS NTs. A metal-semiconductor-metal full-nanostructured ultraviolet (UV) photodetector with ZnS NTs as the active layer, and Ag nanowires of low resistivity and high transmissivity as electrodes, was fabricated and characterized. The ZnS NT-based device displayed a high I _on/I _off ratio of up to ∼1.56 × 10⁵ with a high response to UV incident light at low operation voltage. This work is a meaningful exploration for preparing other one-dimensional semiconductor NTs, and developing a high-performance and power-saving UV sensor.

Fluorescence sensing of amine vapours based on ZnS-supramolecular organogel hybrid films

A selective fluorescent ZnS-supramolecular organogel hybrid film was constructed for sensing volatile organic monoamines and diamines vapour by adopting supramolecular gel films as substrates.

Self-Powered Ultrabroadband Photodetector Monolithically Integrated on a PMN-PT Ferroelectric Single Crystal

Photodetectors capable of detecting two or more bands simultaneously with a single system have attracted extensive attentions because of their critical applications in image sensing, communication, and so on. Here, we demonstrate a self-powered ultrabroadband photodetector monolithically integrated on a 0.72Pb(Mg_1/3Nb_2/3)O₃-0.28PbTiO₃ (PMN-28PT) single crystal. By combining the optothermal and pyroelectric effect, the multifunctional PMN-28PT single crystal can response to a wide wavelength range from UV to terahertz (THz). At room temperature, the photodetector could generate a pyroelectric current under the intermittent illumination of incident light in absence of external bias. A systematic study of the photoresponse was investigated. The pyroelectric current shows an almost linear relationship to illumination intensity. Benefiting from the excellent pyroelectric property of PMN-28PT single crystal and the optimized device architecture, the device exhibited a dramatic improvement in operation frequency up to 3 kHz without any obvious degradation in sensitivity. Such a self-powered photodetector with ultrabroadband response may open a window for the novel application of ferroelectric materials in optoelectronics.

Recent Advances in the Synthesis, Characterization and Application of Zn+-containing Heterogeneous Catalysts

Monovalent Zn+ (3d104s1) systems possess a special electronic structure that can be exploited in heterogeneous catalysis and photocatalysis, though it remains challenge to synthesize Zn+-containing materials. By careful design, Zn+-related species can be synthesized in zeolite and layered double hydroxide systems, which in turn exhibit excellent catalytic potential in methane, CO and CO2 activation. Furthermore, by utilizing advanced characterization tools, including electron spin resonance, X-ray absorption fine structure and density functional theory calculations, the formation mechanism of the Zn+ species and their structure-performance relationships can be understood. Such advanced characterization tools guide the rational design of high-performance Zn+-containing catalysts for efficient energy conversion.

Effect of isovalent dopants on photodegradation ability of ZnS nanoparticles

Isovalent (Mn, Cd, Cu, Co)-doped-ZnS nanoparticles having size vary in between 2 to 5nm are synthesized by co-precipitation route. Their photocatalytic activity for decoloration of Cango Red and Malachite Green dyes is tested in visible radiation under natural conditions. Structural and morphological features of the samples are investigated by X-ray diffraction, Raman spectroscopy, Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM) and UVVis spectrometer. Single phase zinc blende structure of as-synthesized undoped and doped-ZnS is confirmed by XRD and revealed by Rietveld fitting. SEM and TEM images show ultrafine nanoparticles having size in the range of 2 to 5nm. UV-Vis absorption spectra exhibit blue shift in absorption edge of undoped and doped ZnS as compared to bulk counterpart. The photocatalytic activity as a function of dopant concentration and irradiation time is systematically studied. The rate of de-coloration of dyes is detected by UVVis absorption spectroscopy and organic dye mineralization is confirmed by table of carbon (TOC) study. The photocatalytic activity of Mn-doped ZnS is highest amongst all dopants; however Co as a dopant is found to reduce photocatalytic activity than pure ZnS.

Flexible Photodetectors Based on 1D Inorganic Nanostructures

Flexible photodetectors with excellent flexibility, high mechanical stability and good detectivity, have attracted great research interest in recent years. 1D inorganic nanostructures provide a number of opportunities and capabilities for use in flexible photodetectors as they have unique geometry, good transparency, outstanding mechanical flexibility, and excellent electronic/optoelectronic properties. This article offers a comprehensive review of several types of flexible photodetectors based on 1D nanostructures from the past ten years, including flexible ultraviolet, visible, and infrared photodetectors. High-performance organic-inorganic hybrid photodetectors, as well as devices with 1D nanowire (NW) arrays, are also reviewed. Finally, new concepts of flexible photodetectors including piezophototronic, stretchable and self-powered photodetectors are examined to showcase the future research in this exciting field.

Ultrasensitive, Real-time and Discriminative Detection of Improvised Explosives by Chemiresistive Thin-film Sensory Array of Mn(2+) Tailored Hierarchical ZnS

A simple method combing Mn²⁺ doping with a hierarchical structure was developed for the improvement of thin-film sensors and efficient detection of the explosives relevant to improvised explosive devices (IEDs). ZnS hierarchical nanospheres (HNs) were prepared via a solution-based route and their sensing performances were manipulated by Mn²⁺ doping. The responses of the sensors based on ZnS HNs towards 8 explosives generally increase firstly and then decrease with the increase of the doped Mn²⁺ concentration, reaching the climate at 5% Mn²⁺. Furthermore, the sensory array based on ZnS HNs with different doping levels achieved the sensitive and discriminative detection of 6 analytes relevant to IEDs and 2 military explosives in less than 5 s at room temperature. Importantly, the superior sensing performances make ZnS HNs material interesting in the field of chemiresistive sensors, and this simple method could be a very promising strategy to put the sensors based on thin-films of one-dimensional (1D) nanostructures into practical IEDs detection.

High Performance Field Emitters

The field electron emission performance of bulk, 1D, and 2D nanomaterials is here empirically compared in the largest metal-analysis of its type. No clear trends are noted between the turn-on electric field and maximum current density as a function of emitter work function, while a more pronounced correlation with the emitters dimensionality is noted. The turn-on field is found to be twice as large for bulk materials compared to 1D and 2D materials, empirically confirming the wider communities view that high aspect ratios, and highly perturbed surface morphologies allow for enhanced field electron emitters.

Structural Coloration Pigments based on Carbon Modified ZnS@SiO2 Nanospheres with Low-Angle Dependence, High Color Saturation, and Enhanced Stability

Vividly structurally colored pigments produced by employing materials with high indices of refraction such as ZnS, TiO2, or ZrO2 have attracted great attention recently. Generally, pigments with high refractive index based on three-dimensional ordered macroporous (3DOM) structures were prepared by a colloidal crystal template method. However, the preparation of 3DOM structures is time-consuming. Moreover, it will also lead to iridescent colors. In this work, structurally colored pigments based on carbon-modified core-shell nanospheres of ZnS@SiO2 were prepared by a homogeneous deposition method, followed by a modified Stöber method and a calcination process. Compared with conventional method, the pigments prepared in our work shows high color saturation, enhanced stability and low angle dependent. Typical paints composed of pigments and ethanol could be spray coated on any substrates without limitation. These core-shell structural coloration pigments have potential applications for displays, colorimetric sensors, and pigments.

Well-aligned Nd-doped SnO2 nanorod layered arrays: preparation, characterization and enhanced alcohol-gas sensing performance

Nd-doped SnO₂ nanoarrays with novel nanostructures of double nanorod layers prepared by a facile hydrothermal route greatly improve alcohol-sensing performance.

High-Performance Fully Nanostructured Photodetector with Single-Crystalline CdS Nanotubes as Active Layer and Very Long Ag Nanowires as Transparent Electrodes

Long and single-crystalline CdS nanotubes (NTs) have been prepared via a physical evaporation process. A metal-semiconductor-metal full-nanostructured photodetector with CdS NTs as active layer and Ag nanowires (NWs) of low resistivity and high transmissivity as electrodes has been fabricated and characterized. The CdS NTs-based photodetectors exhibit high performance, such as lowest dark currents (0.19 nA) and high photoresponse ratio (Ilight/Idark ≈ 4016) (among CdS nanostructure network photodetectors and NTs netwok photodetectors reported so far) and very low operation voltages (0.5 V). The photoconduction mechanism, including the formation of a Schottky barrier at the interface of Ag NW and CdS NTs and the effect of oxygen adsorption process on the Schottky barrier has also been provided in detail based on the studies of CdS NTs photodetector in air and vacuum. Furthermore, CdS NTs photodetector exhibits an enhanced photosensitivity as compared with CdS NWs photodetector. The enhancement in performance is dependent on the larger surface area of NTs adsorbing more oxygen in air and the microcavity structure of NTs with higher light absorption efficiency and external quantum efficiency. It is believed that CdS NTs can potentially be useful in the designs of 1D CdS-based optoelectronic devices and solar cells.

Precise Determination of the Crystallographic Orientations in Single ZnS Nanowires by Second-Harmonic Generation Microscopy

We report on the systematical study of the second-harmonic generation (SHG) in single zinc sulfide nanowires (ZnS NWs). The high-quality ZnS NWs with round cross-section were fabricated by chemical vapor deposition method. The transmission electron microscopy images show that the actual growth axis has a deviation angle of 0°∼20° with the preferential growth direction [120], which leads to the various polarization-dependent SHG response patterns in different individual ZnS NWs. The SHG response is quite sensitive to the orientations of c axis as well as the (100) and (010) crystal-axis of ZnS NWs; thus, all the three crystal-axis orientations of ZnS NWs are precisely determined by the SHG method. A high SHG conversion efficiency of 7 × 10(-6) is obtained in single ZnS NWs, which shows potential applications in nanoscale ultraviolet light source, nonlinear optical microscopy, and nanophotonic devices.

High-temperature stable field emission of B-doped SiC nanoneedle arrays

Current emission stability is one of the key issues for field emitters for them to be practically applied as electron sources. In the present work, large-scale and well-aligned B-doped SiC nanoneedle arrays have been grown on 6H-SiC wafer substrates via pyrolysis of polymeric precursors. The measured field emission (FE) characteristics suggest that the turn-on fields of the as-synthesized SiC nanoneedle arrays are reduced from 1.92 to 0.98 V μm(-1) with temperature increasing from room temperature (RT) to 500 °C, suggesting their excellent FE performances. The slightly changed current fluctuations (only ∼1.3%) between RT and 200 °C confirm that the present SiC nanoarrays with B dopants could be highly stable field emitters to be used in service under harsh conditions of high temperatures.

Ultraviolet photodetectors with high photosensitivity based on type-II ZnS/SnO2 core/shell heterostructured ribbons

Semiconducting heterostructures with type-II band structure have attracted much attention due to their novel physical properties and wide applications in optoelectronics. Herein, we report, for the first time, a controlled synthesis of type-II ZnS/SnO2 heterostructured ribbon composed of SnO2 nanoparticles that uniformly cover the surface of ZnS ribbon via a simple and versatile thermal evaporation approach. Structural analysis indicated that the majority of SnO2 nanoparticles have an equivalent zone axis, i.e., <-313> of rutile SnO2, which is perpendicular to ±(2-1-10) facets (top/down surfaces) of ZnS ribbon. For those SnO2 nanoparticles decorated on ±(01-10) facets (side surfaces) of ZnS ribbon, an epitaxial relationship of (01-10)ZnO//(020)SnO2 and [2-1-10]ZnO//[001]SnO2 was identified. To explore their electronic and optoelectronic properties, we constructed field-effect transistors from as-prepared new heterostructures, which exhibited an n-type characteristic with an on/off ratio of ∼10(3) and a fast carrier mobility of ∼33.2 cm2 V(-1) s(-1). Owing to the spatial separation of photogenerated electron-hole pairs from type-II band alignment together with the good contacts between electrodes and ribbon, the resultant photodetector showed excellent photoresponse properties, including large photocurrent, high sensitivity (external quantum efficiency as high as ∼2.4×10(7)%), good stability and reproducibility, and relatively fast response speed. Our results suggest great potential of ZnS/SnO2 heterostructures for efficient UV light sensing, and, more importantly, signify the advantages of type-II semiconducting heterostructures for construction of high-performance nano-photodetectors.

Large-scale growth of well-aligned SiC tower-like nanowire arrays and their field emission properties

Fabrication of well-aligned one-dimensional (1D) nanostrucutres is critically important and highly desired since it is the key step to realize the patterned arrays to be used as the display units. In the present work, we report the large-scale and well-aligned growth of n-type SiC nanowire arrays on the 6H-SiC wafer substrates via pyrolysis of polymeric precursors assisted by Au catalysts. The obtained n-type SiC nanowires are highly qualified with sharp tips and numerous sharp corners around the wire bodies, which bring the emitters excellent field emission (FE) performance with low turn-on fields (1.50 V/μm), low threshold fields (2.65 V/μm), and good current emission stabilities (fluctuation <3.8%). The work abilities of the n-type SiC tower-like nanowire arrays under high-temperature harsh environments have been investigated, suggesting that the resultant field emitters could be well serviced up to 500 °C. The temperature-enhanced FE behaviors could be attributed to the reduction of the work function induced by the rise of temperatures and the incorporated N dopants. It is believed that the present well-aligned n-type SiC tower-like nanowire arrays could meet nearly all stringent requirements for an ideal FE emitter with excellent FE properties, making their applications very promising in displays and other electronic nanodevices.