Graphene and Other 2D Colloids: Liquid Crystals and Macroscopic Fibers

Graphene Nanoribbon Core Thermotropic Liquid Crystal with a Well-Defined Molecular Structure

Graphene nanoribbons (GNRs) with hierarchical and well-ordered structures are believed to deliver superior performance in semiconductor device applications. Despite this potential, traditional alignment techniques for GNRs often fall short in producing defect-free and precisely defined molecular architectures. Here, we introduce a strategy for the fabrication of highly ordered GNR by empowering them with thermotropic liquid crystallinity, utilizing a bottom-up solution synthesis approach. The resulting GNR liquid crystal (GNR-LC) molecule can self-assemble into a hexagonal columnar phase. The homeotropic alignment of GNR-LC is enabled by the intrinsic self-assembly capabilities of the thermotropic liquid crystalline state, thereby forming 1D charge transport pathways. Devices incorporating GNR-LC have demonstrated significantly enhanced hole mobility, reaching up to 2.4 cm2 V-1 s-1, underscoring their viability as organic semiconductors for optoelectronic applications.

Thermally Conductive Ti3C2Tx Fibers with Superior Electrical Conductivity

High-performance Ti3C2Tx fibers have garnered significant potential for smart fibers enabled fabrics. Nonetheless, a major challenge hindering their widespread use is the lack of strong interlayer interactions between Ti3C2Tx nanosheets within fibers, which restricts their properties. Herein, a versatile strategy is proposed to construct wet-spun Ti3C2Tx fibers, in which trace amounts of borate form strong interlayer crosslinking between Ti3C2Tx nanosheets to significantly enhance interactions as supported by density functional theory calculations, thereby reducing interlayer spacing, diminishing microscopic voids and promoting orientation of the nanosheets. The resultant Ti3C2Tx fibers exhibit exceptional electrical conductivity of 7781 S cm-1 and mechanical properties, including tensile strength of 188.72 MPa and Young's modulus of 52.42 GPa. Notably, employing equilibrium molecular dynamics simulations, finite element analysis, and cross-wire geometry method, it is revealed that such crosslinking also effectively lowers interfacial thermal resistance and ultimately elevates thermal conductivity of Ti3C2Tx fibers to 13 W m-1 K-1, marking the first systematic study on thermal conductivity of Ti3C2Tx fibers. The simple and efficient interlayer crosslinking enhancement strategy not only enables the construction of thermal conductivity Ti3C2Tx fibers with high electrical conductivity for smart textiles, but also offers a scalable approach for assembling other nanomaterials into multifunctional fibers.

Chiral Nematic Graphene Films with a mesoporous Structure

Ordering a crucial material like pure-graphene into the chiral nematic structure can potentially revolutionize the fields of photonics, chiral separation, and energy storage. However, the controlled fabrication of highly ordered graphene films with a long-range chiral nematic mesoporous structure is very challenging and as such, has not been achieved. Here, a chiral-template-directed chemical vapor deposition growth strategy is presented for the precise fabrication of mesoporous chiral nematic graphene films by using nanocrystalline cellulose as templates. It is evidenced that such graphene films possess the left-hand helical ordering, chiral nematic mesoporous structure with adjustable pore sizes (6.4-13.1 nm), tailored pitch, excellent electrical conductivity (556 S cm-1), high specific surface area (1508 m2 g-1) and mechanical flexibility. By coating Na anode with this film, uniform Na plating is achieved with no dendrite formation, resulting from its unique chiral nematic structure and tunable physicochemical properties. The films also achieved impressive thickness-dependent electromagnetic shielding, i.e., 35-63 dB, demonstrating their potentially multi-disciplinary applications.

Wet-spinning of carbon nanotube fibers: dispersion, processing and properties

Owing to the intrinsic excellent mechanical, electrical, and thermal properties of carbon nanotubes (CNTs), carbon nanotube fibers (CNTFs) have been expected to become promising candidates for the next-generation of high-performance fibers. They have received considerable interest for cutting-edge applications, such as ultra-light electric wire, aerospace craft, military equipment, and space elevators. Wet-spinning is a broadly utilized commercial technique for high-performance fiber manufacturing. Thus, compared with array spinning from drawable CNTs vertical array and direct dry spinning from floating catalyst chemical vapor deposition (FCCVD), the wet-spinning technique is considered to be a promising strategy to realize the production of CNTFs on a large scale. In this tutorial review, we begin with a summative description of CNTFs wet-spinning process. Then, we discuss the high-concentration CNTs wet-spinning dope preparation strategies and corresponding non-covalent adsorption/charge transfer mechanisms. The filament solidification during the coagulation process is another critical procedure for determining the configurations and properties for derived CNTFs. Next, we discuss post-treatment, including continuous drafting and thermal annealing, to further optimize the CNTs orientation and compact configuration. Finally, we summarize the physical property-structure relationship to give insights for further performance promotion in order to satisfy the prerequisite for detailed application. Insights into propelling high-performance CNTFs production from lab-scale to industry-scale are proposed, in anticipation of this novel fiber having an impact on our lives in the near future.

Chemistry, applications, and future prospects of structured liquids

Structured liquids are emerging functional soft materials that combine liquid flowability with solid-like structural stability and spatial organization. Here, we delve into the chemistry and underlying principles of structured liquids, ranging from nanoparticle surfactants (NPSs) to supramolecular assemblies and interfacial jamming. We then highlight recent advancements related to the design of intricate all-liquid 3D structures and examine their reconfigurability. Additionally, we demonstrate the versatility of these soft functional materials through innovative applications, such as all-liquid microfluidic devices and liquid microreactors. We envision that in the future, the vast potential of the liquid-liquid interface combined with human creativity will pave the way for innovative platforms, exemplified by current developments like liquid batteries and circuits. Although still in its nascent stages, the field of structured liquids holds immense promise, with future applications across various sectors poised to harness their transformative capabilities.

Scalable Compliant Graphene Fiber-Based Thermal Interface Material with Metal-Level Thermal Conductivity via Dual-Field Synergistic Alignment Engineering

High-performance thermal interface materials (TIMs) are highly desired for high-power electronic devices to accelerate heat dissipation. However, the inherent trade-off conflict between achieving high thermal conductivity and excellent compliance of filler-enhanced TIMs results in the unsatisfactory interfacial heat transfer efficiency of existing TIM solutions. Here, we report the graphene fiber (GF)-based elastic TIM with metal-level thermal conductivity via mechanical-electric dual-field synergistic alignment engineering. Compared with state-of-the-art carbon fiber (CF), GF features both superb high thermal conductivity of ∼1200 W m-1 K-1 and outstanding flexibility. Under dual-field synergistic alignment regulation, GFs are vertically aligned with excellent orientation (0.88) and high array density (33.5 mg cm-2), forming continuous thermally conductive pathways. Even at a low filler content of ∼17 wt %, GF-based TIM demonstrates extraordinarily high through-plane thermal conductivity of up to 82.4 W m-1 K-1, exceeding most CF-based TIMs and even comparable to commonly used soft indium foil. Benefiting from the low stiffness of GF, GF-based TIM shows a lower compressive modulus down to 0.57 MPa, an excellent resilience rate of 95% after compressive cycles, and diminished contact thermal resistance as low as 7.4 K mm2 W-1. Our results provide a superb paradigm for the directed assembly of thermally conductive and flexible GFs to achieve scalable and high-performance TIMs, overcoming the long-standing bottleneck of mechanical-thermal mismatch in TIM design.

Vertical Array of Graphite Oxide Liquid Crystal by Microwire Shearing for Highly Thermally Conductive Composites

Excellent through-plane thermally conductive composites are highly demanded for efficient heat dissipation. Giant sheets have large crystalline domain and significantly reduce interface phonon scattering, making them promising to build highly thermally conductive composites. However, realizing vertical orientation of giant sheets remains challenging due to their enormous mass and huge hydrodynamic drag force. Here, we achieve highly vertically ordered liquid crystals of giant graphite oxide (more than 100 µm in lateral dimension) by microwire shearing, which endows the composite with a recorded through-plane thermal conductivity of 94 W m^-1 K^-1 . Microscale shearing fields induced by vertical motion of microwires conquer huge hydrodynamic energy barrier and vertically reorient giant sheets. The resulting liquid crystals exhibit extremely retarded relaxation and impart large-scale vertical array with bidirectional ordering degree as high as 0.82. The graphite array-based composites demonstrate an ultrahigh thermal enhancement efficiency of over 35 times per unit volume. Furthermore, the composites improve cooling efficiency by 93% for thermal management tests compared to commercial thermal interface materials. This work offers a novel methodology to precisely manipulate the orientation of giant particles and promote large-scale fabrication of vertical array with advanced functionalities.

All-optical switching of liquid crystals at terahertz frequencies enabled by metamaterials

Nematic liquid crystals integrated with metallic resonators (metamaterials) are intriguing hybrid systems, which not only offer added optical functionalities, but also promote strong light-matter interactions. In this report, we show with an analytical model that the electric field generated by a conventional oscillator-based terahertz time domain spectrometer is strong enough to induce partial, all-optical switching of nematic liquid crystals in such hybrid systems. Our analysis provides a robust theoretical footing for the mechanism of all-optical nonlinearity of liquid crystals, which was recently hypothesised to explain an anomalous resonance frequency shift in liquid crystal-loaded terahertz metamaterials. The integration of metallic resonators with nematic liquid crystals offers a robust approach to explore optical nonlinearity within such hybrid material systems in the terahertz range; paves the way towards increased efficiency of existing devices; and broadens the range of applications of liquid crystals in the terahertz frequency range.

Anisotropic Nanomaterial Liquid Crystals: From Fiber Spinning to Additive Manufacturing

There have long been synergistic relationships among the discovery of new anisotropic materials, advancements in liquid crystal science, and the production of manufactured goods with exciting new properties. Ongoing progress in understanding the phase behavior and shear response of lyotropic liquid crystals comprised of one-dimensional and two-dimensional nanomaterials, coupled with advancements in extrusion-based manufacturing methods, promises to enable the scalable production of solid materials with outstanding properties and controlled order across multiple length scales. This Perspective highlights progress in using anisotropic nanomaterial liquid crystals in two extrusion-based manufacturing methods: solution spinning and direct ink writing. It also describes current challenges and opportunities at the interface of nanotechnology, liquid crystalline science, and manufacturing. The intent is to inspire additional transdisciplinary research that will enable nanotechnology to fulfill its potential for producing advanced materials with precisely controlled morphologies and properties.

Electrostatic Interfacial Cross-Linking and Structurally Oriented Fiber Constructed by Surface-Modified 2D MXene for High-Performance Flexible Pseudocapacitive Storage

Fiber supercapacitors are promising power supplies suitable for wearable electronics, but the internally insufficient cross-linking and random structure of fiber electrodes restrict their performance. This study describes how interfacial cross-linking and oriented structure can fabricate an MXene fiber with high flexibility and electrochemical performance. The continuous and highly oriented macroscopic fibers were constructed by 2D MXene sheets via a liquid-crystalline wet-spinning assembly. The oxyanion-enriched terminations of surface-modified MXene in situ could reinforce the interfacial cross-linking by electrostatic interactions while mediating the sheet-to-sheet lamellar structure within the fiber. The resultant MXene fiber exhibits high electrical conductivity (3545 S cm^-1) and mechanical strength (205.5 MPa) and high pseudocapacitance charge storage capability up to 1570.5 F cm^-3. Notably, the assembled fiber supercapacitor delivers an energy density of 77.6 mWh cm^-3 at 401.9 mW cm^-3, exceptional flexibility and stability exhibiting ∼99.5% capacitance retention under mechanical deformation, and can be integrated into commercial textiles to power microelectronic devices. This work provides insight into the fabrication of an advanced MXene fiber and the development of high-performance flexible fiber supercapacitors.

Shape-Tunable Biconcave Disc-Like Polymer Particles by Swelling-Induced Phase Separation of Seeded Particles with Hydrophilic Shells

Anisotropic shape-tunable polymer particles have gained significant attention for their wide applications, and their performances are usually strongly correlated to their shapes. In contrast to convex particles, the synthesis of highly uniform concave polymer particles remains a great challenge. Here, we present a facile and effective route to synthesize biconcave polystyrene (PS) discs by swelling-induced phase separation of hydrophilically modified PS microspheres and report an unexpected finding that even a tiny amount of hydrophilic units that were incorporated into PS microspheres can significantly change the shape of phase interfaces, resulting in the transformation of disc shapes from convex to flat to concave. This is realized by several typical hydrophilic monomers, such as sodium styrene sulfonate (NaSS), acrylic acid (AA), or (2-(methacryloyloxy)ethyl)trimethylammonium chloride (METAC). The effect of the distribution of hydrophilic units in microspheres was investigated, and the mechanism of shape tuning has been discussed. The curvatures of the bottom surfaces of discs show a strong correlation to the content of hydrophilic units. In particular, we emphasize that the shape control method is general since it does not depend on specific hydrophilic units. This research paves the way for precisely structuring polymer particle shapes, which is important for polymer particles to be used for self-assembly, diffusion, rheology, transport, filler, and many other applications.

Field-induced orientational switching produces vertically aligned Ti3C2Tx MXene nanosheets

Controlling the orientation of two-dimensional materials is essential to optimize or tune their functional properties. In particular, aligning MXene, a two-dimensional carbide and/or nitride material, has recently received much attention due to its high conductivity and high-density surface functional group properties that can easily vary based on its arranged directions. However, erecting 2D materials vertically can be challenging, given their thinness of few nanometres. Here, vertical alignment of Ti₃C₂T_x MXene sheets is achieved by applying an in-plane electric field, which is directly observed using polarised optical microscopy and scanning electron microscopy. The electric field-induced vertical alignment parallel to the applied alternating-current field is demonstrated to be reversible in the absence of a field, back to a random orientation distribution. Interdigitated electrodes with uniaxially aligned MXene nanosheets are demonstrated. These can be further modulated to achieve various patterns using diversified electrode substrates. Anisotropic electrical conductivity is also observed in the uniaxially aligned MXene nanosheet film, which is quite different from the randomly oriented ones. The proposed orientation-controlling technique demonstrates potential for many applications including sensors, membranes, polarisers, and general energy applications.

In this work, authors demonstrate reversible vertical alignment of Ti₃C₂T_x MXene sheets induced by an applied in-plane electric field. Further modulation of the field can achieve programmed patterns onto various electrode substrates.

Monodomain Liquid Crystals of Two-Dimensional Sheets by Boundary-Free Sheargraphy

Eliminating topological defects to achieve monodomain liquid crystals is highly significant for the fundamental studies of soft matter and building long-range ordered materials. However, liquid crystals are metastable and sensitive to external stimuli, such as flow, confinement, and electromagnetic fields, which cause their intrinsic polycrystallinity and topological defects. Here, we achieve the monodomain liquid crystals of graphene oxide over 30 cm through boundary-free sheargraphy. The obtained monodomain liquid crystals exhibit large-area uniform alignment of sheets, which has the same optical polarized angle and intensity. The monodomain liquid crystals provide bidirectionally ordered skeletons, which can be applied as lightweight thermal management materials with bidirectionally high thermal and electrical conductivity. Furthermore, we extend the controllable topology of two-dimensional colloids by introducing singularities and disclinations in monodomain liquid crystals. Topological structures with defect strength from - 2 to + 2 were realized. This work provides a facile methodology to study the structural order of soft matter at a macroscopic level, facilitating the fabrication of metamaterials with tunable and highly anisotropic architectures.

Graphene fibre film/polydimethylsiloxane nanocomposites for high-performance electromagnetic interference shielding

Exploration of high-performance electromagnetic interference (EMI) shielding materials has become a trend to address the increasing electromagnetic (EM) wave pollution environment. In this paper, oriented graphene fibre film (GFF)/polydimethylsiloxane (PDMS) nanocomposites with one-ply unidirectional, two-ply cross-ply, and two-ply unidirectional configurations were prepared using wet-spinning and hot-pressing techniques in a two-step process. Due to the anisotropic electrical performance of GFF, the one-ply laminate exhibits EMI shielding anisotropy that is affected by fibre orientation relative to the electric field component in EM waves. The maximum shielding difference at 8.8 GHz is up to 32.0 dB between the fibre orientation parallel to and perpendicular to the electric field component. In addition, we found that adding a layer of GFF is an intuitive method to enhance the shielding efficiency (SE) of GFF/PDMS nanocomposites by providing more interfaces to enhance absorption losses. An optimal EMI shielding performance of a two-ply unidirectional laminate is observed with an SE value of 50.6 dB, which shields 99.999% of EM waves. The shielding mechanisms are also discussed and clarified from the results of both experimental and theoretical analyses by adjusting the GFF structural parameters, such as the fibre orientation, areal density, number of plies and stacking sequence.

Multiresponsive Polymer Nanocomposite Liquid Crystals Having Heterogeneous Phase Transitions for Battery-Free Temperature Maintenance Indicators

Multiresponsive functional materials that respond to more than one external stimulus are promising for novel photonic, electronic, and biomedical applications. However, the design or synthesis of new multiresponsive materials is challenging. Here, this work reports a facile method to prepare a multiresponsive colloidal material by mixing a liquid-crystalline 2D nanocolloid and a functional polymer colloid. For this purpose, electrically sensitive exfoliated α-ZrP 2D nanocolloids and thermosensitive block copolymer colloids that are dispersed well in water are mixed. In the liquid-crystalline nanocomposite, nematic, antinematic, or isotropic assemblies of α-ZrP, nanoparticles can be electrically and selectively obtained by applying electric fields with different frequencies; furthermore, their rheology is thermally and reversibly controlled through thesol-gel-sol transition. The nanocomposite exhibits a solid gel phase within a predesigned gel temperature range and a liquid sol phase outside this range. These properties facilitate the design of a simple display device in which information can be electrically written and thermally stabilized or erased, and using the device, a battery-free temperature maintenance indication function is demonstrated. The proposed polymer nanocomposite method can enrich the physical properties of 2D nanocolloidal liquid crystals and create new opportunities for eco-friendly, reusable, battery-free electro-optical devices.

Single Molecular Layer of Chitin Sub-Nanometric Nanoribbons: One-Pot Self-Exfoliation and Crystalline Assembly into Robust, Sustainable, and Moldable Structural Materials

Sub-nanometric materials (SNMs) represent a series of unprecedented size-/morphology-related properties applicable in theoretical research and diverse cutting-edge applications. However, in-depth investigation and wide utilization of organic SNMs are frequently hindered, owing to the complex synthesis procedures, insufficient colloidal stability, poor processability, and high cost. In this work, a low-cost, energy-efficient, convenient, effective, and scalable method is demonstrated for directly exfoliating chitin SNMs from their natural sources through a one-pot "tandem molecular intercalation" process. The resultant solution-like sample, which exhibits ribbon-like feature and contains more than 85% of the single molecular layer (thickness <0.6 nm), is capable of being solution-processed to different types of materials. Thanks to the sub-nanometric size and rich surface functional groups, chitin SNMs reveal versatile intriguing properties that rarely observe in their nano-counterparts (nanofibrils), e.g., crystallization-like assembly in the colloidal state and alcoplasticity/self-adhesiveness in the bulk aggregate state. The finding in this work not only opens a new avenue for the high value-added utilization of chitin, but also provides a new platform for both the theoretical study and practical applications of organic SNMs.

Iridescent coating of graphene oxide on various substrates

Two-dimensional nanomaterials have been incorporated into coating layers for exceptional properties in mechanic toughness, electronics, thermology and optics. Graphene oxide (GO), however, was greatly hindered by its strong adsorption within visible wavelength and hereby the intrinsic dark color at the solid state. Herein, we found a unique aqueous mixture of GO containing sodium dodecyl sulfate and l-ascorbic acid. It enabled to produce iridescent coating layers with tunable thickness of 0.3-50 μm on both hydrophilic and hydrophobic substrates (e.g., glass, aluminum foil, polytetrafluoroethylene), through brushing, liquid-casting, dipping and writing. Their iridescence could be further tuned by incorporating MXene nanosheets. And their mechanical properties could be enhanced by certain synthetic polymers (e.g., polyvinyl alcohol and polyethylene glycol). Their sensitivity to heat, laser and water also benefited to pattern the coating layers. Furthermore, by controlling laser intensity, the domain color could be changed (e.g., green to blue). Thus, this study may pave a new pathway of producing iridescent coatings of graphene oxide in a large scale for practical applications.

Liquid Crystals: Versatile Self-Organized Smart Soft Materials

Smart soft materials are envisioned to be the building blocks of the next generation of advanced devices and digitally augmented technologies. In this context, liquid crystals (LCs) owing to their responsive and adaptive attributes could serve as promising smart soft materials. LCs played a critical role in revolutionizing the information display industry in the 20th century. However, in the turn of the 21st century, numerous beyond-display applications of LCs have been demonstrated, which elegantly exploit their controllable stimuli-responsive and adaptive characteristics. For these applications, new LC materials have been rationally designed and developed. In this Review, we present the recent developments in light driven chiral LCs, i.e., cholesteric and blue phases, LC based smart windows that control the entrance of heat and light from outdoor to the interior of buildings and built environments depending on the weather conditions, LC elastomers for bioinspired, biological, and actuator applications, LC based biosensors for detection of proteins, nucleic acids, and viruses, LC based porous membranes for the separation of ions, molecules, and microbes, living LCs, and LCs under macro- and nanoscopic confinement. The Review concludes with a summary and perspectives on the challenges and opportunities for LCs as smart soft materials. This Review is anticipated to stimulate eclectic ideas toward the implementation of the nature's delicate phase of matter in future generations of smart and augmented devices and beyond.

Graphene Fiber-Based Wearable Supercapacitors: Recent Advances in Design, Construction, and Application

Fiber-based supercapacitors (FSCs) that display small volume, robust weavability, high power density, and long-term stability, have urgently become the indispensable power supplies in smart wearable industries. Graphene fiber is regarded as an ideal FSCs electrode due to its remarkable natures of anisotropic framework, adjustable layer spacing, porous structures, large specific-surface-area, processable electroactivity, and high electronical and mechanical properties. This review, mainly focuses on the graphene fiber-based supercapacitors (GFSCs), with respect to fiber preparation, micro-nanostructure modulation, supercapacitor construction, performance optimization, and wearable applications. Various fiber fabrication strategies, including wet-spinning, dry-spinning, film conversion, confined hydrothermal self-assembly, and microfluidic-spinning are presented for fiber's structure manipulation and large-scale production. Advanced nanostructures and electroactivity with various building principles, such as oriented alignment, porous network, hierarchical, and heterogeneous skeleton, engineered active-sites, and mechanical regulation are discussed for boosting charge transfer, and ionic kinetic diffusion and storage. Especially, the optimizing approaches for regular unit alignment, enhanced interlayer interactions, modulated structural nano-architecture are presented to deliver high capacitance and energy density. Moreover, the flexibility and stretchability of graphene fiber, together with wearable applications of power supply are highlighted. Finally, a short summary, current challenges and future perspectives for designing high energy density GFSCs are proposed.

Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures

The emergence of three-dimensional (3D) printing promises a disruption in the design and on-demand fabrication of smart structures in applications ranging from functional devices to human organs. However, the scale at which 3D printing excels is within macro- and microlevels and principally lacks the spatial ordering of building blocks at nanolevels, which is vital for most multifunctional devices. Herein, we employ liquid crystal (LC) inks to bridge the gap between the nano- and microscales in a single-step 3D printing. The LC ink is prepared from mixtures of LCs of nanocellulose whiskers and large sheets of graphene oxide, which offers a highly ordered laminar organization not inherently present in the source materials. LC-mediated 3D printing imparts the fine-tuning required for the design freedom of architecturally layered systems at the nanoscale with intricate patterns within the 3D-printed constructs. This approach empowered the development of a high-performance humidity sensor composed of self-assembled lamellar organization of NC whiskers. We observed that the NC whiskers that are flat and parallel to each other in the laminar organization allow facile mass transport through the structure, demonstrating a significant improvement in the sensor performance. This work exemplifies how LC ink, implemented in a 3D printing process, can unlock the potential of individual constituents to allow macroscopic printing architectures with nanoscopic arrangements.

Electrically Induced Alignment of Semiconductor Nanosheets in Niobate-Clay Binary Nanosheet Colloids toward Significantly Enhanced Photocatalysis

Aqueous binary colloids of niobate and clay nanosheets, prepared by the exfoliation of their mother layered crystals, are unique colloidal systems characterized by the separation of niobate and clay nanosheet phases, where niobate nanosheets form liquid crystalline domains with the size of several tens of micrometers among isotropically dispersed clay nanosheets. The binary colloids show unusual photocatalytic reactions because of the spatial separation of photocatalytically active niobate and photochemically inert clay nanosheets. The present study shows structural conversion of the binary colloids with an external electric field, resulting in the onsite alignment of colloidal nanosheets to improve the photocatalytic performance of the system. The colloidal structure is reshaped by the growth of liquid crystalline domains of photocatalytic niobate nanosheets and by their electric alignment. Niobate nanosheets are assembled by the domain growth process and then aligned by AC voltage, although clay nanosheets do not respond to the electric field. Photocatalytic decomposition of the cationic rhodamine 6G dye, which is selectively adsorbed on clay nanosheets, is examined for the niobate-clay binary nanosheet colloids with or without domain growth and electric field. The fastest decomposition is observed for the electrically aligned colloid without the domain growth, whereas the sample with the domain growth and without the electric alignment shows the slowest decomposition. The results demonstrate the improvement of the photocatalytic performance by changing the colloidal structure, even though the sample composition is the same.

Doping Liquid Crystals of Colloidal Inorganic Nanotubes by Additive-Free Metal Nanoparticles

Doping liquid-crystal phases with nanoparticles is a fast-growing field with potential breakthroughs due to the combination of the properties brought by the two components. One of the main challenges remains the long-term stability of the hybrid system, requiring complex functionalization of the nanoparticles at the expense of their self-assembly properties. Here we demonstrate the successful synthesis of additive-free noble-metal nanoparticles at the surface of charged inorganic nanotubes. Transmission electron microscopy and UV-visible spectroscopy confirm the stabilization of metallic nanoparticles on nanotubes. Meanwhile, the spontaneous formation of liquid-crystals phases induced by the nanotubes is observed, even after surface modification with metallic nanoparticles. Small-angle X-ray scattering experiments reveal that the average interparticle distance in the resulting hybrids can be easily modulated by controlling electrostatic interactions. As a proof-of-concept, we demonstrate the effectiveness of our method for the preparation of homogeneous transparent hybrid films with a high degree of alignment.

Highly Thermally Conductive 3D Printed Graphene Filled Polymer Composites for Scalable Thermal Management Applications

Efficient thermal transportation in a preferred direction is highly favorable for thermal management issues. The combination of 3D printing and two-dimensional (2D) materials such as graphene, BN, and so on enables infinite possibilities for hierarchically aligned structure programming. In this work, we report the formation of the asymmetrically aligned structure of graphene filled thermoplastic polyurethane (TPU) composites during 3D printing process. The as-printed vertically aligned structure demonstrates a through-plane thermal conductivity (TC) up to 12 W m^-1 K^-1 at 45 wt % graphene content, which is ∼8 times of that of a horizontally printed structure and surpasses many of the traditional particle reinforced polymer composites. The superior TC is mainly attributed to the anisotropic structure design that benefited from the preferable degree of orientation of graphene and the multiscale dense structure realized by finely controlling the printing parameters. Finite element method (FEM) confirms the essential impact of anisotropic TC design for highly thermal conductive composites. This study provides an effective way to develop 3D printed graphene-based polymer composites for scalable thermal-related applications such as battery thermal management, electric packaging, and so on.

Scallion-Inspired Graphene Scaffold Enabled High Rate Lithium Metal Battery

Graphene-based one-dimensional macroscopic assemblies (GBOMAs) have attracted great attention and extensive efforts have been devoted to enabling great progress. However, their applications are still restricted to less functionalized electronics, and the superior potentials remain scarce. Herein, inspired by natural scallion structure, a novel strategy was introduced to effectively improve battery performances through the mesoscale scallion-like wrapping of graphene. The obtained RGO/Ag-Li anodes demonstrated an ultralow overpotential of ∼11.3 mV for 1800 h at 1 mA cm^-2 in carbonate electrolytes, which is superior to those of the most previous reports. Besides, this strategy can also be further expanded to the high mass loading of various cathode nanomaterials, and the resulting RGO/LiFePO₄ cathodes exhibited remarkable rate performance and cycle stability. This work opens a new avenue to explore and broaden the applications of GBOMAs as scaffolds in fabricating full lithium batteries via maximizing their advantages derived from the unique structure and properties.

Nanoparticles Supported on Sub-Nanometer Oxide Films: Scaling Model Systems to Bulk Materials

Ultrathin layers of oxides deposited on atomically flat metal surfaces have been shown to significantly influence the electronic structure of the underlying metal, which in turn alters the catalytic performance. Upscaling of the specifically designed architectures as required for technical utilization of the effect has yet not been achieved. Here, we apply liquid crystalline phases of fluorohectorite nanosheets to fabricate such architectures in bulk. Synthetic sodium fluorohectorite, a layered silicate, when immersed into water spontaneously and repulsively swells to produce nematic suspensions of individual negatively charged nanosheets separated to more than 60 nm, while retaining parallel orientation. Into these galleries oppositely charged palladium nanoparticles were intercalated whereupon the galleries collapse. Individual and separated Pd nanoparticles were thus captured and sandwiched between nanosheets. As suggested by the model systems, the resulting catalyst performed better in the oxidation of carbon monoxide than the same Pd nanoparticles supported on external surfaces of hectorite or on a conventional Al2 O3 support. XPS confirmed a shift of Pd 3d electrons to higher energies upon coverage of Pd nanoparticles with nanosheets to which we attribute the improved catalytic performance. DFT calculations showed increasing positive charge on Pd weakened CO adsorption and this way damped CO poisoning.

Nanopartikel auf subnanometer dünnen oxidischen Filmen: Skalierung von Modellsystemen

Durch die Abscheidung von ultradünnen Oxidschichten auf atomar‐flachen Metalloberflächen konnte die elektronische Struktur des Metalls und hierdurch dessen katalytische Aktivität beeinflusst werden. Die Skalierung dieser Architekturen für eine technische Nutzbarkeit war bisher aber kaum möglich. Durch die Verwendung einer flüssigkristallinen Phase aus Fluorhectorit‐Nanoschichten, können wir solche Architekturen in skalierbarem Maßstab imitieren. Synthetischer Natriumfluorhectorit (NaHec) quillt spontan und repulsiv in Wasser zu einer nematischen flüssigkristallinen Phase aus individuellen Nanoschichten. Diese tragen eine permanente negative Schichtladung, sodass selbst bei einer Separation von über 60 nm eine parallele Anordnung der Schichten behalten wird. Zwischen diesen Nanoschichten können Palladium‐Nanopartikel mit entgegengesetzter Ladung eingelagert werden, wodurch die nematische Phase kollabiert und separierte Nanopartikel zwischen den Schichten fixiert werden. Die Aktivität zur CO‐Oxidation des so entstandenen Katalysators war höher als z. B. die der gleichen Nanopartikel auf konventionellem Al2O3 oder der externen Oberfläche von NaHec. Durch Röntgenphotoelektronenspektroskopie konnte eine Verschiebung der Pd‐3d‐Elektronen zu höheren Bindungsenergien beobachtet werden, womit die erhöhte Aktivität erklärt werden kann. Berechnungen zeigten, dass mit erhöhter positiver Ladung des Pd die Adsorptionsstärke von CO erniedrigt und damit auch die Vergiftung durch CO vermindert wird.

Interfacial jamming reinforced Pickering emulgel for arbitrary architected nanocomposite with connected nanomaterial matrix

Three-dimensional (3D) nanocomposite (NC) printing has emerged as a major approach to translate nanomaterial physical properties to 3D geometries. However, 3D printing of conventional NCs with polymer matrix lacks control over nanomaterial connection that facilitates maximizing nanomaterial advantages. Thus, a printable NC that features nanomaterials matrix necessitates development, nevertheless, faces a challenge in preparation because of the trade-off between viscosity and interfacial stability. Here, we develop viscoelastic Pickering emulgels as NC inks through jamming nanomaterials on interfaces and in continuous phase. Emulgel composed of multiphases allow a vast range of composition options and superior printability. The excellent attributes initiate NC with spatial control over geometrics and functions through 3D printing of graphene oxide/phase-change materials emulgel, for instance. This versatile approach provides the means for architecting NCs with nanomaterial continuous phase whose performance does not constrain the vast array of available nanomaterials and allows for arbitrary hybridization and patterns.

Nanocomposite (NC) printing emerged as a major approach to translate nanomaterial properties to 3D geometries but printing of conventional NCs lacks control over nanomaterial connection. Here, the authors develop viscoelastic Pickering emulgels as NC inks through jamming nanomaterials on interfaces and in continuous phase

Nature-Inspired Emerging Chiral Liquid Crystal Nanostructures: From Molecular Self-Assembly to DNA Mesophase and Nanocolloids

Liquid crystals (LCs) are omnipresent in living matter, whose chirality is an elegant and distinct feature in certain plant tissues, the cuticles of crabs, beetles, arthropods, and beyond. Taking inspiration from nature, researchers have recently devoted extensive efforts toward developing chiral liquid crystalline materials with self-organized nanostructures and exploring their potential applications in diverse fields ranging from dynamic photonics to energy and safety issues. In this review, an account on the state of the art of emerging chiral liquid crystalline nanostructured materials and their technological applications is provided. First, an overview on the significance of chiral liquid crystalline architectures in various living systems is given. Then, the recent significant progress in different chiral liquid crystalline systems including thermotropic LCs (cholesteric LCs, cubic blue phases, achiral bent-core LCs, etc.) and lyotropic LCs (DNA LCs, nanocellulose LCs, and graphene oxide LCs) is showcased. The review concludes with a perspective on the future scope, opportunities, and challenges in these truly advanced functional soft materials and their promising applications.

Carbon Nanomaterials: A New Sustainable Solution to Reduce the Emerging Environmental Pollution of Turbomachinery Noise and Vibration

The vibration and noise that resulted from turbomachinery, such as fans, compressors, and centrifugal pumps, are known to bring considerable disturbance and pollution to the machine itself, the environment, and the operators. Hence, how to cope with the vibration and noise has become a recent research focus. With the advancement of materials science, more and more new nanomaterials have been applied in the field of noise and vibration reduction. To be specific, carbon-based nanomaterials, such as carbon fibers, carbon nanotubes, and graphenes, have achieved outstanding results. Carbon nanocomposites, such as carbon nanofibers, carbon nanotubes, and graphenes, are characterized by their low densities, high strengths, and high elastic moduli, all of which made carbon nanocomposites the most promising vibration and noise-reduction composites, thanks to their damping properties, compatibilities, noise and vibration absorption qualities, and wide wave-absorbing frequency bands. In light of this, this paper summarizes the progresses and application prospects of such carbon nanocomposites as carbon nanofibers, carbon nanotubes, and graphenes in the field of turbomachinery vibration and noise reduction.

Nanoscale Assembly of 2D Materials for Energy and Environmental Applications

Rational design of 2D materials is crucial for the realization of their profound implications in energy and environmental fields. The past decade has witnessed significant developments in 2D material research, yet a number of critical challenges remain for real-world applications. Nanoscale assembly, precise control over the orientational and positional ordering, and complex interfaces among 2D layers are essential for the continued progress of 2D materials, especially for energy storage and conversion and environmental remediation. Herein, recent progress, the status, future prospects, and challenges associated with nanoscopic assembly of 2D materials are highlighted, specifically targeting energy and environmental applications. Geometric dimensional diversity of 2D material assembly is focused on, based on novel assembly mechanisms, including 1D fibers from the colloidal liquid crystalline phase, 2D films by interfacial tension (Marangoni effect), and 3D nanoarchitecture assembly by electrochemical processes. Relevant critical advantages of 2D material assembly are highlighted for application fields, including secondary batteries, supercapacitors, catalysts, gas sensors, desalination, and water decontamination.

Novel Trends in Lyotropic Liquid Crystals

We introduce and shortly summarize a variety of more recent aspects of lyotropic liquid crystals (LLCs), which have drawn the attention of the liquid crystal and soft matter community and have recently led to an increasing number of groups studying this fascinating class of materials, alongside their normal activities in thermotopic LCs. The diversity of topics ranges from amphiphilic to inorganic liquid crystals, clays and biological liquid crystals, such as viruses, cellulose or DNA, to strongly anisotropic materials such as nanotubes, nanowires or graphene oxide dispersed in isotropic solvents. We conclude our admittedly somewhat subjective overview with materials exhibiting some fascinating properties, such as chromonics, ferroelectric lyotropics and active liquid crystals and living lyotropics, before we point out some possible and emerging applications of a class of materials that has long been standing in the shadow of the well-known applications of thermotropic liquid crystals, namely displays and electro-optic devices.

Lightweight Ultra-High-Barrier Liners for Helium and Hydrogen

Upcoming efficient air-borne wind energy concepts and communication technologies applying lighter-than-air platforms require high-performance barrier coatings, which concomitantly and nonselectively block permeation not only of helium but also of ozone and water vapor. Similarly, with the emergence of green hydrogen economy, lightweight barrier materials for storage and transport of this highly diffusive gas are very much sought-after, particularly in aviation technology. Here the fabrication of ultraperformance nanocomposite barrier liners by spray coating lamellar liquid crystalline dispersions of high aspect ratio (∼20 000) silicate nanosheets mixed with poly(vinyl alcohol) on a PET substrate foil is presented. Lightweight nanocomposite liners with 50 wt % filler content are obtained showing helium and hydrogen permeabilities as low as 0.8 and 0.6 cm³ μm m^-2 day^-1 atm^-1, respectively. This exhibits an improvement up to a factor of 4 × 10³ as compared to high-barrier polymers such as ethylene vinyl alcohol copolymers. Furthermore, ozone resistance, illustrated by oxygen permeability measurements at elevated relative humidity (75% r.h.), and water vapor resistance are demonstrated. Moreover, the technically benign processing by spray coating will render this barrier technology easily transferable to real lighter-than-air technologies or irregular- and concave-shaped hydrogen tanks.

Phase stability of dispersions of hollow silica nanocubes mediated by non-adsorbing polymers

Although there are theoretical predictions (Eur. Phys. J. E 41, 110 (2018)) for the rich-phase behaviour of colloidal cubes mixed with non-adsorbing polymers, a thorough verification of this phase behaviour is still underway; experimental studies on mixtures of cubes and non-adsorbing polymers in bulk are scarce. In this paper, mixtures of hollow silica nanocubes and linear polystyrene in N,-N-dimethylformamide are used to measure the structure factor of the colloidal cubes as a function of non-adsorbing polymer concentration. Together with visual observations these structure factors enabled us to assess the depletion-mediated phase stability of cube-polymer mixtures. The theoretical and experimental phase boundaries for cube-depletant mixtures are in remarkable agreement, despite the simplifications underlying the theory employed.

A review on strategies for the fabrication of graphene fibres with graphene oxide

Graphene fibres have been recognized as ideal building blocks to make advanced, macroscopic, and functional materials for a variety of applications. Direct fabrication of graphene fibres with ideal graphene sheets is still far from reality due to the weak intermolecular bonding between graphene sheets. In contrast, the construction of graphene oxide fibres by following a reduction process is a common compromise. The self-assembly of graphene oxide is an effective strategy for the continuous fabrication of graphene fibre. Different fabrication strategies endow graphene fibres with different performances. Over the past decade, various studies have been carried out into integrating graphene oxide nanosheets into graphene fibres. In this review, we summarize the assembly methods of graphene fibres and compare the mechanical and electrical performances of the graphene fibres fabricated by different strategies. Also the influence of the fabrication strategy on mechanical performance is discussed. Finally, the expectation of macroscopic graphene fibres in the future is further presented.

Graphene-Based Fibers: Recent Advances in Preparation and Application

Graphene-based fibers (GBFs) are macroscopic 1D assemblies formed by using microscopic 2D graphene sheets as building blocks. Their unique structure exhibits the same merits as graphene such as low weight, high specific surface area, excellent mechanical/electrical properties, and ease of functionalization. Furthermore, the fibrous nature of GBFs is intrinsically compatible with existing textile technologies, making them suitable for applications in flexible and wearable electronics. Recently, novel synthetic methods have endowed GBFs with new structures and functions, further improving their mechanical and electrical properties. These improvements have rapidly bridged the gaps between laboratory demonstrations and real-life applications in fiber-shaped batteries, supercapacitors, and electrochemical sensors. Recent advances in the fabrication, optimization, and application of GBFs are systematically reviewed and a perspective on their future development is given.

A Review on Graphene Fibers: Expectations, Advances, and Prospects

Graphene fiber (GF) is a macroscopically assembled fibrous material made of individual units of graphene and its derivatives. Beyond traditional carbon fibers, graphene building blocks consisting of regulable sizes and regular orientations of GF are expected to generate extreme mechanical and transport properties, as well as multiple functions in smart electronic fibrous devices and textiles. Here, the features of GF are presented along four lines: preparation, morphology, structure-performance correlations, and state-of-the-art applications as flexible and wearable electronics. The principles, experiments, and keys of fabricating GF from graphite with different methods, focusing on the industrially viable mainstream strategy, wet spinning, are introduced. Then, the fundamental relationship between the mechanical and transport properties and the structure, including both highly condensed structures for high-performance and hierarchical structures for multiple functions, is presented. The advances of GF based on structure-performance formulas boost its functional applications, especially in electronic devices. Finally, the possible promotion methods and structural-functional integrated applications of GF are discussed.

Chondroinductive Alginate-Based Hydrogels Having Graphene Oxide for 3D Printed Scaffold Fabrication

Scaffolds based on bioconjugated hydrogels are attractive for tissue engineering because they can partly mimic human tissue characteristics. For example, they can further increase their bioactivity with cells. However, most of the hydrogels present problems related to their processability, consequently limiting their use in 3D printing to produce tailor-made scaffolds. The goal of this work is to develop bioconjugated hydrogel nanocomposite inks for 3D printed scaffold fabrication through a micro-extrusion process having improved both biocompatibility and processability. The hydrogel is based on a photocrosslinkable alginate bioconjugated with both gelatin and chondroitin sulfate in order to mimic the cartilage extracellular matrix, while the nanofiller is based on graphene oxide to enhance the printability and cell proliferation. Our results show that the incorporation of graphene oxide into the hydrogel inks considerably improved the shape fidelity and resolution of 3D printed scaffolds because of a faster viscosity recovery post extrusion of the ink. Moreover, the nanocomposite inks produce anisotropic threads after the 3D printing process because of the templating of the graphene oxide liquid crystal. The in vitro proliferation assay of human adipose tissue-derived mesenchymal stem cells (hADMSCs) shows that bioconjugated scaffolds present higher cell proliferation than pure alginate, with the nanocomposites presenting the highest values at long times. Live/Dead assay otherwise displays full viability of hADMSCs adhered on the different scaffolds at day 7. Notably, the scaffolds produced with nanocomposite hydrogel inks were able to guide the cell proliferation following the direction of the 3D printed threads. In addition, the bioconjugated alginate hydrogel matrix induced chondrogenic differentiation without exogenous pro-chondrogenesis factors as concluded from immunostaining after 28 days of culture. This high cytocompatibility and chondroinductive effect toward hADMSCs, together with the improved printability and anisotropic structures, makes these nanocomposite hydrogel inks a promising candidate for cartilage tissue engineering based on 3D printing.

Ultra-tough and highly ordered macroscopic fiber assembly from 2D functional metal oxide nanosheet liquid crystals and strong ionic interlayer bridging

Macroscopic assembly of 2D nanomaterials, especially for the one-dimensional macroscopic ordered fiber assembly from 2D liquid crystals (LCs), is rising to an unprecedented height and will continue to be an important topic in materials. However, this case of 2D functional metal oxide nanosheets is quite challenging. For the first time, the high-performance tungstate macroscopic fiber has been realized through an LC wet-spinning process involving the formation of LC colloid with spinnability and performance improvement by interlayer bridging in macroscopic assembly. The resultant macroscopic fiber yields record high tensile strength (198.5 MPa) and fracture toughness (3.0 MJ m-3) owing to their highly ordered structure and strong ionic interlayer bridging. Despite the intrinsically weak mechanical strength of the nanosheets, with only a few percent of graphene, the fibers manifest mechanical properties comparable to that of graphene fibers. Inspired by this concept, the possible macroscopic fibers assembled from other 2D functional metal oxide nanosheets will become a reality in the near future, holding great promise in aerospace and wearable applications.

Artificial colloidal liquid metacrystals by shearing microlithography

Meta-periodicity beyond intrinsic atomic and molecular order, such as metacrystalline and quasicrystalline lattices, exists in solids, but is usually elusive in lyotropic liquid crystals for its energetic instability. The stable meta-periodicity in lyotropic liquid crystals in the absence of external stimuli remains unexplored, and how to achieve it keeps a great challenge. Here we create lyotropic liquid crystals with stable meta-periodicity in a free state, coined as liquid metacrystals, in colloidal systems by an invented shearing microlithography. The meta-periodicity is dynamically stabilized by the giant molecular size and strong excluded volume repulsion. Liquid metacrystals are designed to completely cover a library of symmetries, including five Bravais and six quasicrystalline lattices. Liquid metacrystal promises an extended form of liquid crystals with rich meta-periodicity and the shearing microlithography emerges as a facile technology to fabricate liquid meta-structures and metamaterials, enabling the digital design of structures and functionalities of liquid crystalline materials.

Stable periodic structures can be difficult to obtain in a liquid crystal compared to a solid due to the energetic instability of the former. Here the authors present a technique to fabricate quasicrystalline structures of graphene oxide liquid crystals which have high stability.

Iridescence in nematics: Photonic liquid crystals of nanoplates in absence of long-range periodicity

Photonic materials with positionally ordered structure can interact strongly with light to produce brilliant structural colors. Here, we found that the nonperiodic nematic liquid crystals of nanoplates can also display structural color with only significant orientational order. Owing to the loose stacking of the nematic nanodiscs, such colloidal dispersion is able to reflect a broad-spectrum wavelength, of which the reflection color can be further enhanced by adding carbon nanoparticles to reduce background scattering. Upon the addition of electrolytes, such vivid colors of nematic dispersion can be fine-tuned via electrostatic forces. Furthermore, we took advantage of the fluidity of the nematic structure to create a variety of colorful arts. It was expected that the concept of implanting nematic features in photonic structure of lyotropic nanoparticles may open opportunities for developing advanced photonic materials for display, sensing, and art applications.

Lyotropic Liquid Crystals from Colloidal Suspensions of Graphene Oxide

Lyotropic liquid crystals from colloidal particles have been known for more than a century, but have attracted a revived interest over the last few years. This is due to the developments in nanoscience and nanotechnology, where the liquid crystal order can be exploited to orient and reorient the anisotropic colloids, thus enabling, increasing and switching the preferential properties of the nanoparticles. In particular, carbon-based colloids like carbon nanotubes and graphene/graphene–oxide have increasingly been studied with respect to their lyotropic liquid crystalline properties over the recent years. We critically review aspects of lyotropic graphene oxide liquid crystal with respect to properties and behavior which seem to be generally established, but also discuss those effects that are largely unfamiliar so far, or as of yet of controversial experimental or theoretical outcome.

Highly Ordered Graphene Solid: An Efficient Platform for Capacitive Sodium-Ion Storage with Ultrahigh Volumetric Capacity and Superior Rate Capability

As an emerging type of electrochemical energy storage devices, sodium-ion capacitors (SICs) are potentially capable of high energy density and high power density, as well as low cost and long lifespan. Unfortunately, the lack of high-performance capacitive cathodes that can fully couple with the well-developed battery-type anodes severely restricts the further development of SICs. Here, we develop a compact yet highly ordered graphene solid (HOGS), which combines the merits of high density and high porosity and, more attractively, possesses a highly ordered lamellar texture with low pore tortuosity. As the capacitive cathode of SICs,  HOGS delivers a record-high volumetric capacity (303 F cm^-3 or 219 mA h cm^-3 at 0.05 A g^-1), a superior rate capability (185 F cm^-3 or 139 mA h cm^-3 even at 10 A g^-1), and an outstanding cycling stability (over 80% after 10 000 cycles). The material design and construction strategies reported here can be easily extended to other metal-ion-based energy storage technologies, exhibiting universal potentials in compact electrochemical energy storage systems.

Nonsphere Drop Impact Assembly of Graphene Oxide Liquid Crystals

Creating long-lived topological textured liquid crystals (LCs) in confined nonspherical space is of significance in both generations of structures and fundamental studies of topological physics. However, it remains a great challenge due to the fluid character of LCs and the unstable tensional state of transient nonspheres. Here, we realize a rich series of topological textures confined in nonspherical geometries by drop impact assembly (DIA) of graphene oxide (GO) aqueous LCs. Various highly curved nonspherical morphologies of LCs were captured by gelator bath, generating distinct out-of-equilibrium yet long-lived macroscopic topological textures in 3D confinement. Our hydrodynamic investigations on DIA processes reveal that the shear-thinning fluid behavior of LCs and the arrested GO alignments mainly contribute to the topological richness in DIA. Utilizing the shaping behavior of GO LCs compared to other conventional linear polymers such as alginate, we further extend the DIA methodology to design more complex yet highly controllable functional composites and hybrids. This work thus reveals the potential to scale production of uniform yet anisotropic materials with rich topologic textures and tailored composition.

Three-Dimensional Porous Carbon Nanotubes/Reduced Graphene Oxide Fiber from Rapid Phase Separation for a High-Rate All-Solid-State Supercapacitor

Graphene fiber-based supercapacitors (SCs) are rising as having the greatest potential for portable/wearable energy storage devices. However, their rate performance is not well pleasing, which greatly impedes their broad practical applications. Herein, three-dimensional porous carbon nanotube/reduced graphene oxide fibers were prepared by a nonsolvent-induced rapid phase separation method followed by hydrazine vapor reduction. Benefitting from their three-dimensional porous structure, large specific surface area, and high conductivity, the fabricated SC exhibits a high volume capacitance of 54.9 F cm^-3 and high energy and power densities (4.9 mW h cm^-3 and 15.5 W cm^-3, respectively). Remarkably, the SC works well at a high scan rate of 50 V s^-1 and shows a fast frequency response with a short time constant of 78 ms. Furthermore, the fiber-shaped SC also exhibits very stable electrochemical performances when it is subjected to mechanical bending and succeeding straightening process, indicating its great potential application in flexible electronic devices.