1
|
Bai X, Gou X, Zhang J, Liang J, Yang L, Wang S, Hou X, Chen F. A Review of Smart Superwetting Surfaces Based on Shape-Memory Micro/Nanostructures. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2206463. [PMID: 36609999 DOI: 10.1002/smll.202206463] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2022] [Revised: 12/04/2022] [Indexed: 06/17/2023]
Abstract
Bioinspired smart superwetting surfaces with special wettability have aroused great attention from fundamental research to technological applications including self-cleaning, oil-water separation, anti-icing/corrosion/fogging, drag reduction, cell engineering, liquid manipulation, and so on. However, most of the reported smart superwetting surfaces switch their wettability by reversibly changing surface chemistry rather than surface microstructure. Compared with surface chemistry, the regulation of surface microstructure is more difficult and can bring novel functions to the surfaces. As a kind of stimulus-responsive material, shape-memory polymer (SMP) has become an excellent candidate for preparing smart superwetting surfaces owing to its unique shape transformation property. This review systematically summarizes the recent progress of smart superwetting SMP surfaces including fabrication methods, smart superwetting phenomena, and related application fields. The smart superwettabilities, such as superhydrophobicity/superomniphobicity with tunable adhesion, reversible switching between superhydrophobicity and superhydrophilicity, switchable isotropic/anisotropic wetting, slippery surface with tunable wettability, and underwater superaerophobicity/superoleophobicity with tunable adhesion, can be obtained on SMP micro/nanostructures by regulating the surface morphology. Finally, the challenges and future prospects of smart superwetting SMP surfaces are discussed.
Collapse
Affiliation(s)
- Xue Bai
- Northwest Institute for Non-ferrous Metal Research, Xi'an, 710016, P. R. China
| | - Xiaodan Gou
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an, 710049, P. R. China
| | - Jialiang Zhang
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an, 710049, P. R. China
| | - Jie Liang
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an, 710049, P. R. China
| | - Lijing Yang
- Northwest Institute for Non-ferrous Metal Research, Xi'an, 710016, P. R. China
| | - Shaopeng Wang
- Northwest Institute for Non-ferrous Metal Research, Xi'an, 710016, P. R. China
| | - Xun Hou
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an, 710049, P. R. China
| | - Feng Chen
- State Key Laboratory for Manufacturing System Engineering and Shaanxi Key Laboratory of Photonics Technology for Information, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an, 710049, P. R. China
| |
Collapse
|
2
|
Zhou H, Niu H, Wang H, Lin T. Self-Healing Superwetting Surfaces, Their Fabrications, and Properties. Chem Rev 2023; 123:663-700. [PMID: 36537354 DOI: 10.1021/acs.chemrev.2c00486] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
The research on superwetting surfaces with a self-healing function against various damages has progressed rapidly in the recent decade. They are expected to be an effective approach to increasing the durability and application robustness of superwetting materials. Various methods and material systems have been developed to prepare self-healing superwetting surfaces, some of which mimic natural superwetting surfaces. However, they still face challenges, such as being workable only for specific damages, external stimulation to trigger the healing process, and poor self-healing ability in the water, marine, or biological systems. There is a lack of fundamental understanding as well. This article comprehensively reviews self-healing superwetting surfaces, including their fabrication strategies, essential rules for materials design, and self-healing properties. Self-healing triggered by different external stimuli is summarized. The potential applications of self-healing superwetting surfaces are highlighted. This article consists of four main sections: (1) the functional surfaces with various superwetting properties, (2) natural self-healing superwetting surfaces (i.e., plants, insects, and creatures) and their healing mechanism, (3) recent research development in various self-healing superwetting surfaces, their preparation, wetting properties in the air or liquid media, and healing mechanism, and (4) the prospects including existing challenges, our views and potential solutions to the challenges, and future research directions.
Collapse
Affiliation(s)
- Hua Zhou
- College of Textiles & Clothing, State Key Laboratory for Biofibers and Eco-textiles, Collaborative Innovation Centre for Eco-textiles of Shandong Province, Qingdao University, Qingdao 266071, China
| | - Haitao Niu
- College of Textiles & Clothing, State Key Laboratory for Biofibers and Eco-textiles, Collaborative Innovation Centre for Eco-textiles of Shandong Province, Qingdao University, Qingdao 266071, China
| | - Hongxia Wang
- Institute for Frontier Materials, Deakin University, Geelong Victoria 3216, Australia.,Institute for Nanofiber Intelligent Manufacture and Applications, School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China
| | - Tong Lin
- Institute for Nanofiber Intelligent Manufacture and Applications, School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China.,State Key Laboratory of Separation Membranes and Membrane Processes, School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China
| |
Collapse
|
3
|
Zhang Z, Pei G, Zhao K, Pang P, Gao W, Ye T, Ma B, Luo J, Deng J. Fresnel Diffraction Strategy Enables the Fabrication of Flexible Superomniphobic Surfaces. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:14508-14516. [PMID: 36377419 DOI: 10.1021/acs.langmuir.2c02658] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Doubly re-entrant surfaces inspired by springtails exhibit excellent repellency to low-surface-tension liquid. However, the flexible doubly re-entrant surfaces are difficult to fabricate, especially for the overhang of the structure. Herein, we demonstrate a simple Fresnel aperture diffraction modulation strategy in microscale lithography coupled with a molding process to obtain the flexible doubly re-entrant superomniphobic surfaces with nanoscale overhangs. The negative nanoscale overhang features were formed in a single-layer photoresist due to the fine-modulation of the optical intensity fluctuation of the Fresnel aperture diffraction. The as-prepared flexible non-fluorinated polydimethylsiloxane (PDMS) doubly re-entrant microstructure based on the Fresnel aperture diffraction (D-BF) surface (without any additional treatments) could repel ethanol droplets (21.8 mN m-1) in the Cassie-Baxter state. The robust nanoscale overhangs obtained by the molding process enable the maximum breakthrough pressure for the low-surface-tension ethanol droplets on the D-BF surfaces up to about 230 Pa, allowing ethanol liquids with Weber numbers up to 8.7 to fully bounce off. The fabricated non-fluorinated D-BF superomniphobic surface maintains outstanding liquid repellency after the surface wettability modification and deformation test.
Collapse
Affiliation(s)
- Zhonggang Zhang
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, 127 Youyi Road, Xi'an710072, China
| | - Guangyao Pei
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, 127 Youyi Road, Xi'an710072, China
| | - Keli Zhao
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, 127 Youyi Road, Xi'an710072, China
| | - Peng Pang
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, 127 Youyi Road, Xi'an710072, China
| | - Wei Gao
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, 127 Youyi Road, Xi'an710072, China
| | - Tao Ye
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, 127 Youyi Road, Xi'an710072, China
| | - Binghe Ma
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, 127 Youyi Road, Xi'an710072, China
| | - Jian Luo
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, 127 Youyi Road, Xi'an710072, China
| | - Jinjun Deng
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, 127 Youyi Road, Xi'an710072, China
| |
Collapse
|
4
|
Jiao Y, Zhang T, Ji J, Guo Y, Wang Z, Tao T, Xu J, Liu X, Liu K. Functional Microtextured Superhydrophobic Surface with Excellent Anti-Wear Resistance and Friction Reduction Properties. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:13166-13176. [PMID: 36252150 DOI: 10.1021/acs.langmuir.2c01959] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
The wear-resistant superhydrophobic (SHB) surfaces with excellent water-repellency ability were prepared by constructing a microtextured armor on an aluminum surface. With the assistance of laser-induced microtextures, the SHB surface could keep a longer water-repellency ability and a lower friction coefficient even after repeated friction tests under different loads and at different speeds. The mechanism of microtexture-protecting SHB coating is revealed based on both theoretical and elemental analysis. Additionally, we explore the relationship between the three-dimensional topography parameters (ISO 25178) and variation of water contact angles under different test recycles. The results show that the rough surface with appropriate Sa and higher Sku exhibits a better wear resistance, which is mainly related to the storing ability of SHB coating inside the microtextures. Moreover, the surface with appropriate Str exhibits excellent wear resistance, which is mainly associated with better chip-removal ability. Finally, the tribological properties of the microtextured SHB surface are researched. It is worth noting that compared with the microtextured surface without SHB coating and the SHB-coated surface without microtextures, the microtextured SHB surface has the lowest friction coefficient under dry friction because the SHB coating would largely decrease the surface energy of the interface, so the adhesion friction decreases. The microtexture armor on the surfaces would protect the wear of SHB coating, so the SHB coating inside the microtexture could continuously play the role of a particle lubricant at the sliding interface and decrease the friction force of the sliding interface. We believe that the present study would contribute to the further understanding of the constructing mechanism of anti-wear SHB surfaces and provide a new strategy for topography design of engineering surfaces with friction reduction properties.
Collapse
Affiliation(s)
- Yunlong Jiao
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| | - Tao Zhang
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| | - Jiawei Ji
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| | - Yuhang Guo
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| | - Zhaochang Wang
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| | - Tongtong Tao
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| | - Jimin Xu
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| | - Xiaojun Liu
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| | - Kun Liu
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| |
Collapse
|
5
|
Wang W, Sun J, Vallabhuneni S, Pawlowski B, Vahabi H, Nellenbach K, Brown AC, Scholle F, Zhao J, Kota AK. On-demand, remote and lossless manipulation of biofluid droplets. MATERIALS HORIZONS 2022; 9:2863-2871. [PMID: 36070425 PMCID: PMC9634865 DOI: 10.1039/d2mh00695b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The recent global outbreaks of epidemics and pandemics have shown us that we are severely under-prepared to cope with infectious agents. Exposure to infectious agents present in biofluids (e.g., blood, saliva, urine etc.) poses a severe risk to clinical laboratory personnel and healthcare workers, resulting in hundreds of millions of hospital-acquired and laboratory-acquired infections annually. Novel technologies that can minimize human exposure through remote and automated handling of infectious biofluids will mitigate such risk. In this work, we present biofluid manipulators, which allow on-demand, remote and lossless manipulation of virtually any liquid droplet. Our manipulators are designed by integrating thermo-responsive soft actuators with superomniphobic surfaces. Utilizing our manipulators, we demonstrate on-demand, remote and lossless manipulation of biofluid droplets. We envision that our biofluid manipulators will not only reduce manual operations and minimize exposure to infectious agents, but also pave the way for developing inexpensive, simple and portable robotic systems, which can allow point-of-care operations, particularly in developing nations.
Collapse
Affiliation(s)
- Wei Wang
- Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC, 27695, USA.
- Department of Mechanical, Aerospace, and Biomedical Engineering, University of Tennessee, Knoxville, TN, 37996, USA
| | - Jiefeng Sun
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO, 80523, USA.
| | - Sravanthi Vallabhuneni
- Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC, 27695, USA.
| | - Benjamin Pawlowski
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO, 80523, USA.
| | - Hamed Vahabi
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO, 80523, USA.
| | - Kimberly Nellenbach
- Joint Department of Biomedical Engineering, North Carolina State University and The University of North Carolina at Chapel Hill, Raleigh, NC, 27695, USA
- Comparative Medicine Institute, North Carolina State University, Raleigh, NC, 27695, USA
| | - Ashley C Brown
- Joint Department of Biomedical Engineering, North Carolina State University and The University of North Carolina at Chapel Hill, Raleigh, NC, 27695, USA
- Comparative Medicine Institute, North Carolina State University, Raleigh, NC, 27695, USA
| | - Frank Scholle
- Department of Biological Sciences, North Carolina State University, Raleigh, NC, 27695, USA
| | - Jianguo Zhao
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO, 80523, USA.
| | - Arun K Kota
- Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC, 27695, USA.
| |
Collapse
|
6
|
Zhang Z, Ma B, Ye T, Gao W, Pei G, Luo J, Deng J, Yuan W. One-Step Fabrication of Flexible Bioinspired Superomniphobic Surfaces. ACS APPLIED MATERIALS & INTERFACES 2022; 14:39665-39672. [PMID: 35983670 DOI: 10.1021/acsami.2c12483] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Flexible superomniphobic doubly re-entrant (Dual-T) microstructures inspired by springtails have attracted growing attention due to their excellent liquid-repellent properties. However, the simple and practical manufacturing processes of the flexible Dual-T microstructures are urgently needed. Here, we proposed a one-step molding process coupled with the lithography technique to fabricate the elastomeric polydimethylsiloxane (PDMS) Dual-T microstructure surfaces with high uniformity. The angle between the downward overhang and the horizontal direction could reach 90° (vertical overhang). The flexible superomniphobic Dual-T microstructure surfaces, without fluorination treatment and physical treatments, could repel liquids with a surface tension lower than 20 mN m-1 in the Cassie-Baxter state. Owing to the excellent robustness of the one-step molding downward overhanging, the max breakthrough pressure of this surface could reach up to 164.3 Pa for ethanol droplets. Furthermore, the flexible superomniphobic Dual-T surface allowed impinging ethanol droplets to completely rebound at the Weber number up to 7.1 with an impact velocity of ∼0.32 m s-1. The Dual-T microstructure surface maintained excellent superomniphobicity even after surface oxygen plasma treatment and exhibited excellent structural robustness and recoverability to various large mechanical deformations.
Collapse
Affiliation(s)
- Zhonggang Zhang
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, Xi'an 710072, China
| | - Binghe Ma
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, Xi'an 710072, China
| | - Tao Ye
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, Xi'an 710072, China
| | - Wei Gao
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, Xi'an 710072, China
| | - Guangyao Pei
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, Xi'an 710072, China
| | - Jian Luo
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, Xi'an 710072, China
| | - Jinjun Deng
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, Xi'an 710072, China
| | - Weizheng Yuan
- Ministry of Education Key Laboratory of Micro/Nano Systems for Aerospace, Northwestern Polytechnical University, Xi'an 710072, China
| |
Collapse
|
7
|
Song Y, Hu Y, Zhang Y, Li G, Wang D, Yang Y, Zhang Y, Zhang Y, Zhu W, Li J, Wu D, Chu J. Flexible Tri-switchable Wettability Surface for Versatile Droplet Manipulations. ACS APPLIED MATERIALS & INTERFACES 2022; 14:37248-37256. [PMID: 35938402 DOI: 10.1021/acsami.2c12890] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Smart surfaces with tunable wettability are promising due to their abilities to create diversified functionalities that the fixed surfaces cannot provide. However, limited by imprecise adjustment of structural geometry and almost conventional switching modes of wettability, it is still challenging to achieve the reversible switching between multiple wetting states. Herein, a novel tri-switchable wettability surface with an in situ switching ability is used for the manipulation of a given droplet, which consists of a stretchable substrate and a micron column array. The femtosecond laser direct writing technique is utilized to generate distinct wettability of the two components. Taking the advantage of good tensile properties, the surface morphology is adjusted in a rapid, reversible way to obtain diverse wetting performances from the lotus-like effect to rice-leaf-like anisotropy and then to the rose-petal-like effect. Based on the triplex wetting transition on the same surface, we further developed a multifunctional device to realize a range of in situ manipulations, including the surface self-cleaning, the directional transport of droplets, and the capture, the vertical transport, and release of droplets. This work paves the way for expanding the field of smart surfaces with tunable wettability beyond conventional dual-property wetting behavior and exhibits versatile manipulations of droplets for microfluidic applications.
Collapse
Affiliation(s)
- Yuegan Song
- School of Manufacture Science and Engineering, Key Laboratory of Testing Technology for Manufacturing Process, Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, P. R. China
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, P. R. China
| | - Yanlei Hu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, P. R. China
| | - Yachao Zhang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, P. R. China
| | - Guoqiang Li
- School of Manufacture Science and Engineering, Key Laboratory of Testing Technology for Manufacturing Process, Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, P. R. China
| | - Dawei Wang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, P. R. China
| | - Yi Yang
- School of Manufacture Science and Engineering, Key Laboratory of Testing Technology for Manufacturing Process, Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, P. R. China
| | - Yafeng Zhang
- School of Manufacture Science and Engineering, Key Laboratory of Testing Technology for Manufacturing Process, Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, P. R. China
| | - Yiyuan Zhang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, P. R. China
| | - Wulin Zhu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, P. R. China
| | - Jiawen Li
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, P. R. China
| | - Dong Wu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, P. R. China
| | - Jiaru Chu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, P. R. China
| |
Collapse
|
8
|
Cheng Z, He Y, Wang Z, Jiao X, Song Y, Meng J. Controllable droplet sliding on smart shape memory slippery surface. Chem Asian J 2022; 17:e202200481. [PMID: 35768903 DOI: 10.1002/asia.202200481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2022] [Revised: 06/29/2022] [Indexed: 11/07/2022]
Abstract
Recently, slippery surfaces with controllable droplet sliding have aroused much attention in both fundamental research and realistic application. However, for almost all existing surfaces, constant stimuli such as thermal, light, magnetic fields, etc., are indispensable. Herein, by constructing pit structures on shape memory polymer and further infusing oil with low surface tension, we report a shape memory slippery surface that can overcome the above imperfection. Based on the shape memory performance, the surface can memorize diverse pit size as the surface is stretched or recovered. With the variation of pit structure, the sliding performances for both water and organic liquid droplets can be reversibly adjusted between the rolling and pinning states. This work, based on the shape memory effect, reports smart droplet sliding control through regulating surface microstructure, which not only provides a strategy for droplet sliding control, but also offers some fresh ideas for designing novel intelligent slippery surface.
Collapse
Affiliation(s)
- Zhongjun Cheng
- Harbin Institute of Technology, Natural Science Research Center, Academy of Fundamental and Interdisciplinary Sciences, Xidazhi street 92th, 150001, Harbin, CHINA
| | - Yaoxu He
- Harbin Institute of Technology, School of chemical engineering and chemistry, CHINA
| | - Zhe Wang
- Harbin Institute of Technology, School of chemical engineering and chemistry, CHINA
| | - Xiaoyu Jiao
- Shanghai Institute of Space Power-Sources, State Key Laboratory of Space Power-sources Technology, CHINA
| | - Yinbin Song
- Harbin Institute of Technology, School of chemical engineering and chemistry, CHINA
| | - Junhui Meng
- Beijing Institute of Technology, School of Aerospace Engineering, CHINA
| |
Collapse
|
9
|
Shome A, Das A, Borbora A, Dhar M, Manna U. Role of chemistry in bio-inspired liquid wettability. Chem Soc Rev 2022; 51:5452-5497. [PMID: 35726911 DOI: 10.1039/d2cs00255h] [Citation(s) in RCA: 22] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
Chemistry and topography are the two distinct available tools for customizing different bio-inspired liquid wettability including superhydrophobicity, superamphiphobicity, underwater superoleophobicity, underwater superoleophilicity, and liquid infused slippery property. In nature, various living species possessing super and special liquid wettability inherently comprises of distinctly patterned surface topography decorated with low/high surface energy. Inspired from the topographically diverse natural species, the variation in surface topography has been the dominant approach for constructing bio-inspired antiwetting interfaces. However, recently, the modulation of chemistry has emerged as a facile route for the controlled tailoring of a wide range of bio-inspired liquid wettability. This review article aims to summarize the various reports published over the years that has elaborated the distinctive importance of both chemistry and topography in imparting and modulating various bio-inspired wettability. Moreover, this article outlines some obvious advantages of chemical modulation approach over topographical variation. For example, the strategic use of the chemical approach has allowed the facile, simultaneous, and independent tailoring of both liquid wettability and other relevant physical properties. We have also discussed the design of different antiwetting patterned and stimuli-responsive interfaces following the strategic and precise alteration of chemistry for various prospective applications.
Collapse
Affiliation(s)
- Arpita Shome
- Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology Guwahati, Kamrup, Assam-781039, India.
| | - Avijit Das
- Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology Guwahati, Kamrup, Assam-781039, India.
| | - Angana Borbora
- Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology Guwahati, Kamrup, Assam-781039, India.
| | - Manideepa Dhar
- Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology Guwahati, Kamrup, Assam-781039, India.
| | - Uttam Manna
- Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology Guwahati, Kamrup, Assam-781039, India. .,Centre for Nanotechnology, Indian Institute of Technology Guwahati, Kamrup, Assam-781039, India.,Jyoti and Bhupat Mehta School of Health Science and Technology, Indian Institute of Technology Guwahati, Kamrup, Assam-781039, India
| |
Collapse
|
10
|
Nakamura S, Yamauchi Y, Hozumi A. Long-Lasting Self-Healing Surface Dewettability through the Rapid Regeneration of Surface Morphologies. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:7611-7617. [PMID: 35635019 DOI: 10.1021/acs.langmuir.2c00956] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The development of self-healing systems for artificial superhydrophobic materials/surfaces based on the reconstruction of surface topologies rather than chemical makeup has been much less established. In this article, we report for the first time a simple and straightforward method for self-repairing surface dewettability over a long period of time by rapidly regenerating surface microstructures. We selected paraffin wax as a matrix for methyltrichlorosilane (MTCS) having strong reactivity with moisture/water and simply mixed them. When the as-prepared MTCS-loaded paraffin wax surfaces were exposed to air for a few hours, they spontaneously became highly hydrophobic with water contact angles of about 150° due to the formation of disordered surface microstructures. The use of paraffin wax with a few angstrom-scale space as a matrix was found to be more effective than the use of poly(dimethylsiloxane) with nanometer-size porosity in preventing both evaporation and degradation of MTCS's chemical reactivity for a long period. Therefore, for about 1 month, even after the surface microstructures were completely destroyed, surface dewettability could be self-repaired by rapidly regenerating surface morphologies. In addition, chemical damage by UV/ozone exposure could also be repeatably self-healed by the reconstruction of surface chemical makeup. We thus expect that this simple approach could provide future insights to impart the self-healing ability of manmade superhydrophobic materials/surfaces against chemical and physical damages.
Collapse
Affiliation(s)
- Satoshi Nakamura
- National Institute of Advanced Industrial Science and Technology (AIST), 2266-98, Anagahora, Shimoshidami, Moriyama, Nagoya 463-8560, Japan
| | - Yusuke Yamauchi
- Australian Institute for Bioengineering and Nanotechnology (AIBN), The University of Queensland, Brisbane, QLD 4072, Australia
- International Center for Materials Nanoarchitectonics (WPI-MANA), National Institute for Materials Science, Tsukuba, Ibaraki 305-0044, Japan
| | - Atsushi Hozumi
- National Institute of Advanced Industrial Science and Technology (AIST), 2266-98, Anagahora, Shimoshidami, Moriyama, Nagoya 463-8560, Japan
| |
Collapse
|
11
|
Shao Y, Dou H, Tao P, Jiang R, Fan Y, Jiang Y, Zhao J, Zhang Z, Yue T, Gorb SN, Ren L. Precise Controlling of Friction and Adhesion on Reprogrammable Shape Memory Micropillars. ACS APPLIED MATERIALS & INTERFACES 2022; 14:17995-18003. [PMID: 35389609 DOI: 10.1021/acsami.2c03589] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Microstructured surfaces with stimuli-responsive performances have aroused great attention in recent years, but it still remains a significant challenge to endow surfaces with precisely controlled morphological changes in microstructures, so as to get the precise control of regional properties (e.g., friction, adhesion). Herein, a kind of carbonyl iron particle-doped shape memory polyurethane micropillar with precisely controllable morphological changes is realized, upon remote near-infrared light (NIR) irradiation. Owing to the reversible transition of micropillars between bent and upright states, the micro-structured surface exhibits precisely controllable low-to-high friction transitions, together with the changes of friction coefficient ranging from ∼0.8 to ∼1.2. Hence, the changes of the surface friction even within an extremely small area can be precisely targeted, under local NIR laser irradiation. Moreover, the water droplet adhesion force of the surface can be reversibly switched between ∼160 and ∼760 μN, demonstrating the application potential in precisely controllable wettability. These features indicate that the smart stimuli-responsive micropillar arrays would be amenable to a variety of applications that require remote, selective, and on-demand responses, such as a refreshable Braille display system, micro-particle motion control, lab-on-a-chip, and microfluidics.
Collapse
Affiliation(s)
- Yanlong Shao
- Key Laboratory of Bionic Engineering, Ministry of Education, College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
| | - Haixu Dou
- Key Laboratory of Bionic Engineering, Ministry of Education, College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
| | - Peng Tao
- Key Laboratory of Bionic Engineering, Ministry of Education, College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
| | - Rujian Jiang
- Key Laboratory of Bionic Engineering, Ministry of Education, College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
| | - Yong Fan
- College of Chemistry, Jilin University, Changchun 130022, China
| | - Yue Jiang
- Key Laboratory of Bionic Engineering, Ministry of Education, College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
| | - Jie Zhao
- Key Laboratory of Bionic Engineering, Ministry of Education, College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
| | - Zhihui Zhang
- Key Laboratory of Bionic Engineering, Ministry of Education, College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
| | - Tailin Yue
- Key Laboratory of Bionic Engineering, Ministry of Education, College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
| | - Stanislav N Gorb
- Department of Functional Morphology and Biomechanics, Kiel University, Kiel 24118, Germany
| | - Luquan Ren
- Key Laboratory of Bionic Engineering, Ministry of Education, College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
| |
Collapse
|
12
|
Zhou X, Liu J, Liu W, Steffen W, Butt HJ. Fabrication of Stretchable Superamphiphobic Surfaces with Deformation-Induced Rearrangeable Structures. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2107901. [PMID: 34989448 DOI: 10.1002/adma.202107901] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/02/2021] [Revised: 12/21/2021] [Indexed: 06/14/2023]
Abstract
Stretchable superamphiphobic surfaces with a high deformation resistance are in demand to achieve liquid-repellent performance in flexible electronics, artificial skin, and textile dressings. However, it is challenging to make mechanically robust superamphiphobic coatings, which maintain their superliquid repellency in a highly stretched state. Here, a stretchable superamphiphobic surface is reported, on which the microstructures can rearrange during stretching to maintain a stable superamphiphobicity even under a high tensile strain. The surface is prepared by spray-coating silicone nanofilaments onto a prestretched substrate (e.g., cis-1,4-polyisoprene) with poly(dimethylsiloxane) (PDMS) layer as a binder. After subsequent fluorination, this surface keeps its superamphiphobicity to both water and n-hexadecane up to the tensile strain of at least 225%. The binding PDMS layer and rearrangeable structures maximize the deformation resistance of the surface during the stretching process. The superamphiphobicity and morphology of the surface are maintained even after 1000 stretch-release cycles. Taking advantage of the mentioned benefits, a liquid manipulation system is designed, which has the potential for fabricating reusable and low-cost platforms for biochemical detection and lab-on-a-chip systems.
Collapse
Affiliation(s)
- Xiaoteng Zhou
- Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100190, China
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
| | - Jie Liu
- Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100190, China
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
| | - Wendong Liu
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
| | - Werner Steffen
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
| | - Hans-Jürgen Butt
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany
| |
Collapse
|
13
|
Ezazi M, Shrestha B, Maharjan A, Kwon G. Water-Responsive Self-Repairing Superomniphobic Surfaces via Regeneration of Hierarchical Topography. ACS MATERIALS AU 2021; 2:55-62. [PMID: 36855698 PMCID: PMC9888626 DOI: 10.1021/acsmaterialsau.1c00036] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Superomniphobic surfaces that can self-repair physical damage are desirable for sustainable performance over time in many practical applications that include self-cleaning, corrosion resistance, and protective gears. However, fabricating such self-repairing superomniphobic surfaces has thus far been a challenge because it necessitates the regeneration of both low-surface-energy materials and hierarchical topography. Herein, a water-responsive self-repairing superomniphobic film is reported by utilizing cross-linked hydroxypropyl cellulose (HPC) composited with silica (SiO2) nanoparticles (HPC-SiO2) that is treated with a low-surface-energy perfluorosilane. The film can repair physical damage (e.g., a scratch) in approximately 10 s by regenerating its hierarchical topography and low-surface-energy material upon the application of water vapor. The repaired region shows an almost complete recovery of its inherent superomniphobic wettability and mechanical hardness. The repairing process is driven by the reversible hydrogen bond between the hydroxyl (-OH) groups which can be dissociated upon exposure to water vapor. This results in a viscous flow of the HPC-SiO2 film into the damaged region. A mathematical model composed of viscosity and surface tension of the HPC-SiO2 film can describe the experimentally measured viscous flow with reasonable accuracy. Finally, we demonstrate that the superomniphobic HPC-SiO2 film can repair physical damage by a water droplet pinned on a damaged area or by sequential rolling water droplets.
Collapse
|
14
|
Li J, Wang W, Zhu R, Huang Y. Superhydrophobic Artificial Compound Eye with High Transparency. ACS APPLIED MATERIALS & INTERFACES 2021; 13:35026-35037. [PMID: 34255480 DOI: 10.1021/acsami.1c05558] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Natural compound eyes have inspired the development of self-cleaning, waterproof, and antifog optical devices. However, the traditional methods generally sacrifice the transparency of optical units to introduce hydrophobicity, which significantly limits the practical applications of state-of-the-art hydrophobic technologies. This work aims to fabricate a microimaging system by combining photolithography, inkjet printing, and chemical growth. Herein, an artificial compound eye (ACE) is endowed with stable superhydrophobicity and high transparency without affecting its optical performance. The obtained ACE system possesses good static and dynamic dewetting properties along with excellent optical performance. Its static contact angle exceeds 160°, whereas the sliding angle and contact angle hysteresis values are ∼5.5° and ∼3.8°, respectively. Furthermore, the contact time is found to be 11.97 s for the Weber number of 12. The droplet undergoes a reversible process during compressing and stretching, and the ACE exhibits no adhesion under a pressure load of 4 mN. This proves that the introduction of nonwetting nanohairs on the sidewalls of the microcone arrays significantly improves the dynamic dewetting of the system. More importantly, the properly designed position of nanohairs ensures that the optical performance of ACE is maintained at a level of ∼95% compared to that of the bare glass. The superhydrophobic ACE exhibits low adhesion and great transparency. This rationally designed ACE may provide useful guidelines for fabrication of superhydrophobic optical devices with high transparency and enable potential applications in military, medical, and some outdoor activity fields.
Collapse
Affiliation(s)
- Jiang Li
- College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling 712100, China
| | - Wenjun Wang
- State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710054, China
| | - Ruixiang Zhu
- College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling 712100, China
| | - Yuxiang Huang
- College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling 712100, China
| |
Collapse
|
15
|
Shrestha B, Ezazi M, Kwon G. Engineered Nanoparticles with Decoupled Photocatalysis and Wettability for Membrane-Based Desalination and Separation of Oil-Saline Water Mixtures. NANOMATERIALS 2021; 11:nano11061397. [PMID: 34070494 PMCID: PMC8227411 DOI: 10.3390/nano11061397] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/08/2021] [Revised: 05/21/2021] [Accepted: 05/22/2021] [Indexed: 12/14/2022]
Abstract
Membrane-based separation technologies are the cornerstone of remediating unconventional water sources, including brackish and industrial or municipal wastewater, as they are relatively energy-efficient and versatile. However, membrane fouling by dissolved and suspended substances in the feed stream remains a primary challenge that currently prevents these membranes from being used in real practices. Thus, we directly address this challenge by applying a superhydrophilic and oleophobic coating to a commercial membrane surface which can be utilized to separate and desalinate an oil and saline water mixture, in addition to photocatalytically degrading the organic substances. We fabricated the photocatalytic membrane by coating a commercial membrane with an ultraviolet (UV) light-curable adhesive. Then, we sprayed it with a mixture of photocatalytic nitrogen-doped titania (N-TiO2) and perfluoro silane-grafted silica (F-SiO2) nanoparticles. The membrane was placed under a UV light, which resulted in a chemically heterogeneous surface with intercalating high and low surface energy regions (i.e., N-TiO2 and F-SiO2, respectively) that were securely bound to the commercial membrane surface. We demonstrated that the coated membrane could be utilized for continuous separation and desalination of an oil–saline water mixture and for simultaneous photocatalytic degradation of the organic substances adsorbed on the membrane surface upon visible light irradiation.
Collapse
|
16
|
Ye WQ, Wei YY, Wang DN, Yang CG, Xu ZR. A digital microfluidic platform based on a near-infrared light-responsive shape-memory micropillar array. LAB ON A CHIP 2021; 21:1131-1138. [PMID: 33533387 DOI: 10.1039/d0lc01324b] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
In this work, we developed a digital microfluidic platform based on a shape memory micropillar array responsive to near-infrared light, and the droplets were programmatically manipulated through light-induced micropillar deformation. The micropillar array was constructed on the surface of a poly(ethylene-vinyl acetate) copolymer, a shape memory polymer sensitive to near-infrared light. Before droplet manipulation, the micropillar array was kept temporarily tilted by heating and pressing. Under the irradiation of a near-infrared laser, the micropillar array achieved the transition from the temporary shape to the original shape. Temperature gradient and micropillar deformation caused by near-infrared light irradiation produce the driving force for droplet movement. The movement of the laser mounted on an electronically controlled displacement platform was controlled by a computer to achieve the programmed control of the droplets. Moreover, we demonstrated light-manipulated droplet movement and fusion, and achieved ascorbic acid detection using this digital microfluidic platform. In particular, the micropillar array chip is able to manipulate droplets in a wide range of 0.1 μL to 10 μL. The proposed digital microfluidic platform will broaden the application of digital microfluidic technology in analytical chemistry and biomedicine.
Collapse
Affiliation(s)
- Wen-Qi Ye
- Research Center for Analytical Sciences, Northeastern University, Shenyang, 110819, China.
| | | | | | | | | |
Collapse
|
17
|
Remote, selective, and in situ manipulation of liquid droplets on a femtosecond laser-structured superhydrophobic shape-memory polymer by near-infrared light. Sci China Chem 2021. [DOI: 10.1007/s11426-020-9940-6] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
|
18
|
Zhao X, Park DS, Choi J, Park S, Soper SA, Murphy MC. Flexible-templated imprinting for fluorine-free, omniphobic plastics with re-entrant structures. J Colloid Interface Sci 2021; 585:668-675. [PMID: 33127056 PMCID: PMC8483707 DOI: 10.1016/j.jcis.2020.10.046] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/20/2020] [Revised: 10/12/2020] [Accepted: 10/13/2020] [Indexed: 10/23/2022]
Abstract
HYPOTHESIS Compared to vertical micro-pillars, re-entrant micro-structures exhibited superior omniphobicity for suspending liquids to Cassie-Baxter state. However, the existing re-entrant structures rely on complex multi-step deposition and etching procedures. The conventional, rigid-templated imprinting would instead damage the re-entrant structures. This leads to the question: is it possible to preserve the re-entrant curvatures by a flexible-templated imprinting? EXPERIMENTS We facilely imprinted the re-entrant structures on a plastic substrate using a flexible nylon-mesh template. The effect of imprinting time (15-35 min), temperature (110-120 °C) and pressure (15-50 Bar) was investigated. To further improve the liquid-repellency and abrasion resistance, the silica nanoparticles (30-650 nm) along with epoxy resin binder (10 mg/mL) were pre-coated. FINDINGS A one-step imprinting is sufficient to fabricate the re-entrant structures by utilizing flexible nylon-mesh template, without damaging the imprinted structures after the demolding process. The pre-coated silica nanoparticles and epoxy resin (1) improved liquid repellency by introducing hierarchical surface structures (e.g. contact angle hysteresis of olive oil reduced > 10°), and (2) acted as a protective layer against mechanical abrasion (omniphobicity maintained after 25 cycles, ~1.6 kPa sand paper abrasion). Additionally, the fluorine-free post-treatment was sufficient for the omniphobicity on the obtained plastic structures.
Collapse
Affiliation(s)
- Xiaoxiao Zhao
- Center for BioModular Multiscale Systems for Precision Medicine, Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, United States
| | - Daniel S Park
- Center for BioModular Multiscale Systems for Precision Medicine, Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, United States
| | - Junseo Choi
- Center for BioModular Multiscale Systems for Precision Medicine, Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, United States
| | - Sungook Park
- Center for BioModular Multiscale Systems for Precision Medicine, Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, United States
| | - Steven A Soper
- Departments of Chemistry and Mechanical Engineering, University of Kansas, Lawrence, KS 66045, United States
| | - Michael C Murphy
- Center for BioModular Multiscale Systems for Precision Medicine, Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, United States.
| |
Collapse
|
19
|
Zhang W, Wang D, Sun Z, Song J, Deng X. Robust superhydrophobicity: mechanisms and strategies. Chem Soc Rev 2021; 50:4031-4061. [PMID: 33554976 DOI: 10.1039/d0cs00751j] [Citation(s) in RCA: 137] [Impact Index Per Article: 45.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Abstract
Superhydrophobic surfaces hold great prospects for extremely diverse applications owing to their water repellence property. The essential feature of superhydrophobicity is micro-/nano-scopic roughness to reserve a large portion of air under a liquid drop. However, the vulnerability of the delicate surface textures significantly impedes the practical applications of superhydrophobic surfaces. Robust superhydrophobicity is a must to meet the rigorous industrial requirements and standards for commercial products. In recent years, major advancements have been made in elucidating the mechanisms of wetting transitions, design strategies and fabrication techniques of superhydrophobicity. This review will first introduce the mechanisms of wetting transitions, including the thermodynamic stability of the Cassie state and its breakdown conditions. Then we highlight the development, current status and future prospects of robust superhydrophobicity, including characterization, design strategies and fabrication techniques. In particular, design strategies, which are classified into passive resistance and active regeneration for the first time, are proposed and discussed extensively.
Collapse
Affiliation(s)
- Wenluan Zhang
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, China.
| | | | | | | | | |
Collapse
|
20
|
Cheng Z, Zhang D, Luo X, Lai H, Liu Y, Jiang L. Superwetting Shape Memory Microstructure: Smart Wetting Control and Practical Application. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2001718. [PMID: 33058318 DOI: 10.1002/adma.202001718] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/11/2020] [Revised: 04/27/2020] [Indexed: 06/11/2023]
Abstract
Smart control of wettability on superwetting surfaces has aroused much attention in the past few years. Compared with traditional strategies such as adjusting the surface chemistry, regulating the surface microstructure is more difficult, though it can bring lots of new functions. Recently, it was found that, based on the shape memory effect of a shape memory polymer, the surface microstructure can be controlled more easily and precisely. Here, recent developments in the smart control of wettability on superwetting shape memory microstructures and corresponding applications are summarized. The primary concern is the superhydrophobic surfaces that have demonstrated numerous attractive functions, including controllable droplet storage, transportation, bouncing, capture/release, and reprogrammable gradient wetting, under variation of the surface microstructure. Finally, some achievements in wetting control on other superwetting surfaces (such as superomniphobic surfaces and superslippery surfaces) and perspectives on future research directions are also discussed.
Collapse
Affiliation(s)
- Zhongjun Cheng
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150001, PR China
| | - Dongjie Zhang
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150001, PR China
| | - Xin Luo
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150001, PR China
| | - Hua Lai
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150001, PR China
| | - Yuyan Liu
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150001, PR China
| | - Lei Jiang
- CAS Key Laboratory of Bio-Inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, China
| |
Collapse
|
21
|
Chi J, Zhang X, Wang Y, Shao C, Shang L, Zhao Y. Bio-inspired wettability patterns for biomedical applications. MATERIALS HORIZONS 2021; 8:124-144. [PMID: 34821293 DOI: 10.1039/d0mh01293a] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Benefiting from the remarkable wettability heterogeneity, bio-inspired wettability patterns present a progressive and versatile platform for manipulating and patterning liquids, which provides an emerging strategy for operating liquid samples with crucial values in biomedical applications. In this review, we present a general summary of bio-inspired wettability patterns. After a compendious introduction of natural wettability phenomena and their underlying mechanisms, we summarize the general design principles and fabrication methods for preparing artificial wettability materials. Next, we shift to patterned surface wettability with an emphasis on the fabrication approaches. Then, we discuss in detail the various practical applications of wettability patterns in the biomedical field, including cell culture, drug screening and biosensors. Critical thinking about the current challenges and future outlook is also provided. We believe that this review would propel the prosperous development of bio-inspired wettability patterns to flourish in the field of biomedical engineering.
Collapse
Affiliation(s)
- Junjie Chi
- Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China.
| | | | | | | | | | | |
Collapse
|
22
|
Haghanifar S, Galante AJ, Leu PW. Challenges and Prospects of Bio-Inspired and Multifunctional Transparent Substrates and Barrier Layers for Optoelectronics. ACS NANO 2020; 14:16241-16265. [PMID: 33232118 DOI: 10.1021/acsnano.0c06452] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Bio-inspiration and advances in micro/nanomanufacturing processes have enabled the design and fabrication of micro/nanostructures on optoelectronic substrates and barrier layers to create a variety of functionalities. In this review article, we summarize research progress in multifunctional transparent substrates and barrier layers while discussing future challenges and prospects. We discuss different optoelectronic device configurations, sources of bio-inspiration, photon management properties, wetting properties, multifunctionality, functionality durability, and device durability, as well as choice of materials for optoelectronic substrates and barrier layers. These engineered surfaces may be used for various optoelectronic devices such as touch panels, solar modules, displays, and mobile devices in traditional rigid forms as well as emerging flexible versions.
Collapse
Affiliation(s)
- Sajad Haghanifar
- Department of Industrial Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, United States
| | - Anthony J Galante
- Department of Industrial Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, United States
| | - Paul W Leu
- Department of Industrial Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, United States
- Department of Mechanical Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, United States
- Department of Chemical Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, United States
| |
Collapse
|
23
|
Zhang Z, Cui Z, Wang H, Jiang C, Zhao J, Ren L. Tribological performance of microstructured surfaces with different wettability from superhydrophilic to superhydrophobic. BIOSURFACE AND BIOTRIBOLOGY 2020. [DOI: 10.1049/bsbt.2020.0023] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/30/2022] Open
Affiliation(s)
- Zhihui Zhang
- The Key Laboratory of Bionic Engineering of Ministry of Education and the College of Biological and Agricultural EngineeringJilin UniversityChangchun130022People's Republic of China
- State Key Laboratory of Automotive Simulation and ControlJilin UniversityChangchun130022People's Republic of China
| | - Zhenquan Cui
- The Key Laboratory of Bionic Engineering of Ministry of Education and the College of Biological and Agricultural EngineeringJilin UniversityChangchun130022People's Republic of China
| | - Hujun Wang
- The Key Laboratory of Bionic Engineering of Ministry of Education and the College of Biological and Agricultural EngineeringJilin UniversityChangchun130022People's Republic of China
| | - Chaorui Jiang
- College of Mechanical EngineeringXinjiang UniversityUrumqi830047People's Republic of China
| | - Jie Zhao
- The Key Laboratory of Bionic Engineering of Ministry of Education and the College of Biological and Agricultural EngineeringJilin UniversityChangchun130022People's Republic of China
| | - Luquan Ren
- The Key Laboratory of Bionic Engineering of Ministry of Education and the College of Biological and Agricultural EngineeringJilin UniversityChangchun130022People's Republic of China
| |
Collapse
|
24
|
Li J, Wang W, Mei X, Pan A. Designable Ultratransparent and Superhydrophobic Surface of Embedded Artificial Compound Eye with Extremely Low Adhesion. ACS APPLIED MATERIALS & INTERFACES 2020; 12:53557-53567. [PMID: 33176099 DOI: 10.1021/acsami.0c18881] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Real-world implementation of artificial compound eye (ACE) has been limited by its poor transparency and high requirement for the stable Cassie state. In general, the improvement of surface dewetting performance sacrifices the transparency of ACE. Herein, ACE was obtained by an integrated manufacturing technology that combined photolithography, microprinting, and chemical growth. Through skillful manipulation of the fabrication process, dewetting hairs were fabricated on the top of micropillars and around the microlens. The combination of nanohairs and micropillars resulted in outstanding superhydrophobicity (∼170°), pristine lotus effect with low sliding angle (∼1°), and contact angle hysteresis (∼2°). Moreover, the surface showed almost no adhesion under a preload of 4 mN, exhibiting excellent stable Cassie state and antiadhesion performance. Furthermore, dynamic impact showed that the impacting droplet was quickly detached from the surface (contact time ∼14.1 ms) without sticking for We = 60. The designed transparency resulted in high performance of optical unit (∼99%, bare glass for comparison). Moreover, ACE exhibited better focusing and imaging capability under larger aperture diameter than microlens without nanohairs. We envision that this research presents a significant advancement in imparting superhydrophobicity and transparency to a so-far inapplicable family of optical devices for many practical outdoor applications.
Collapse
Affiliation(s)
- Jiang Li
- State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xian 710054, China
- Shaanxi Key Laboratory of Intelligent Robots, Xi'an Jiaotong University, Xian 710049, China
| | - Wenjun Wang
- State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xian 710054, China
- Shaanxi Key Laboratory of Intelligent Robots, Xi'an Jiaotong University, Xian 710049, China
| | - Xuesong Mei
- State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xian 710054, China
- Shaanxi Key Laboratory of Intelligent Robots, Xi'an Jiaotong University, Xian 710049, China
| | - Aifei Pan
- State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xian 710054, China
- Shaanxi Key Laboratory of Intelligent Robots, Xi'an Jiaotong University, Xian 710049, China
| |
Collapse
|
25
|
Liu P, Lai H, Luo X, Xia Q, Zhang D, Cheng Z, Liu Y, Jiang L. Superlyophilic Shape Memory Porous Sponge for Smart Liquid Permeation. ACS NANO 2020; 14:14047-14056. [PMID: 32970408 DOI: 10.1021/acsnano.0c06673] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Recently, smart liquid permeation has aroused much attention. However, existing strategies to achieve such a goal are often based on reversibly controlling hydrophobicity/hydrophilicity on static porous structures, which are unsuitable for oils with low surface tension, and meanwhile they cannot realize tunable permeation flux since the pore sizes are constant. Herein, we report a superlyophilic shape memory porous sponge (SSMS) that can demonstrate tunable pore size from about 28 nm to 900 μm as the material's shape is changed. Based on the controllability in pore size, not only ON/OFF penetration but also precisely tunable permeation flux can be obtained for both water and oil. Furthermore, by using the SSMS, an application in accurate release of small-molecule rhodamine B was also demonstrated. This work reports a material with tunable pore size for controllable liquid permeation, which provides some ideas for designing smart superwetting permeation materials.
Collapse
Affiliation(s)
- Pengchang Liu
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, People's Republic of China
| | - Hua Lai
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, People's Republic of China
| | - Xin Luo
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, People's Republic of China
| | - Qixing Xia
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, People's Republic of China
| | - Dongjie Zhang
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, People's Republic of China
| | - Zhongjun Cheng
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, People's Republic of China
| | - Yuyan Liu
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, People's Republic of China
| | - Lei Jiang
- CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, People's Republic of China
| |
Collapse
|
26
|
Shi X, Zhang Y, Wu D, Wu T, Jiang S, Jiao Y, Wu S, Zhang Y, Hu Y, Ding W, Chu J. Femtosecond Laser-Assisted Top-Restricted Self-Growth Re-Entrant Structures on Shape Memory Polymer for Dynamic Pressure Resistance. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2020; 36:12346-12356. [PMID: 32967422 DOI: 10.1021/acs.langmuir.0c02335] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Bioinspired surface material with re-entrant texture has been proven effective in exhibiting good pressure resistance to droplets with low surface tension under static conditions. In this work, we combined femtosecond laser cutting with shape memory polymer (SMP) and tape to fabricate re-entrant micropillar arrays by proposing a top-restricted self-growth (TRSG) strategy. Our proposed TRSG strategy simplifies the fabrication process and improves the processing efficiency of the re-entrant structure-based surface material. The structural parameters of the re-entrant micropillar array (microdisk diameter D, center-to-center distance P, and height H) can be adjusted through our TRSG processing method. To better characterize the anti-infiltration ability of various re-entrant micropillars, we studied the dynamic process of ethylene glycol droplet deformation by applying external vertical vibration to the surface material. Three parameters (vibration mode, amplitude, and frequency) of the external excitation and structural parameters of the re-entrant micropillar array were systemically investigated. We found that the surface material had better dynamic pressure resistance when P and D of the re-entrant texture were 650 and 500 μm, respectively, after heating for 6 min. This work provides new insights into the preparation and characterization of the surface material, which may find potential applications in microdroplet manipulation, drug testing, and biological sensors.
Collapse
Affiliation(s)
- Xiangchao Shi
- Department of Electronic Science and Technology, University of Science and Technology of China, Hefei 230026, China
| | - Yachao Zhang
- CAS Key Laboratory of Mechanical Behaviour and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Dong Wu
- CAS Key Laboratory of Mechanical Behaviour and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Tao Wu
- Department of Modern Mechanics, University of Science and Technology of China, Hefei 230026, China
| | - Shaojun Jiang
- CAS Key Laboratory of Mechanical Behaviour and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Yunlong Jiao
- Institute of Tribology, Hefei University of Technology, Hefei 230009, China
| | - Sizhu Wu
- School of Instrument Science and Optoelectronics Engineering, Hefei University of Technology, Hefei 230009, China
| | - Yiyuan Zhang
- CAS Key Laboratory of Mechanical Behaviour and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Yanlei Hu
- CAS Key Laboratory of Mechanical Behaviour and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Weiping Ding
- Department of Electronic Science and Technology, University of Science and Technology of China, Hefei 230026, China
| | - Jiaru Chu
- CAS Key Laboratory of Mechanical Behaviour and Design of Materials, Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| |
Collapse
|
27
|
Liu X, Gu H, Ding H, Du X, Wei M, Chen Q, Gu Z. 3D Bioinspired Microstructures for Switchable Repellency in both Air and Liquid. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2020; 7:2000878. [PMID: 33101848 PMCID: PMC7578892 DOI: 10.1002/advs.202000878] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/10/2020] [Revised: 04/30/2020] [Indexed: 06/04/2023]
Abstract
In addition to superhydrophobicity/superoleophobicity, surfaces with switchable water/oil repellency have also aroused considerable attention because of their potential values in microreactors, sensors, and microfluidics. Nevertheless, almost all those as-prepared surfaces are only applicable for liquids with higher surface tension (γ > 25.0 mN m-1) in air. In this work, inspired by some natural models, such as lotus leaf, springtail skin, and filefish skin, switchable repellency for liquids (γ = 12.0-72.8 mN m-1) in both air and liquid is realized via employing 3D deformable multiply re-entrant microstructures. Herein, the microstructures are fabricated by a two-photon polymerization based 3D printing technique and the reversible deformation is elaborately tuned by evaporation-induced bending and immersion-induced fast recovery (within 30 s). Based on 3D controlled microstructural architectures, this work offers an insightful explanation of repellency/penetration behavior at any three-phase interface and starts some novel ideas for manipulating opposite repellency by designing/fabricating stimuli-responsive microstructures.
Collapse
Affiliation(s)
- Xiaojiang Liu
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
- School of Mechanical and Aerospace EngineeringNanyang Technological University50 Nanyang AvenueSingapore639798Singapore
| | - Hongcheng Gu
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| | - Haibo Ding
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| | - Xin Du
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| | - Mengxiao Wei
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| | - Qiang Chen
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| | - Zhongze Gu
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| |
Collapse
|
28
|
Liu W, Xiang S, Liu X, Yang B. Underwater Superoleophobic Surface Based on Silica Hierarchical Cylinder Arrays with a Low Aspect Ratio. ACS NANO 2020; 14:9166-9175. [PMID: 32644775 PMCID: PMC7460563 DOI: 10.1021/acsnano.0c04670] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/04/2020] [Accepted: 07/09/2020] [Indexed: 06/11/2023]
Abstract
A superantiwetting surface based on low-aspect-ratio hierarchical cylinder arrays (HCAs) was successfully obtained on a silica substrate by colloidal lithography with photolithography. Colloidal lithography is a technique involving transfer of a pattern to a substrate by etching or exposure to a radiation source through a mask composed of a packed colloidal crystal, while photolithography is utilized by which a pattern is transferred photographically to a photoresist-coated substrate, and the substrate is subsequently etched. The surface provides an alternative approach to apply aligned micro-nano integrated structures with a relatively low aspect ratio in superantiwetting. The obtained HCAs successfully integrated micro- and nanoscale structures into one system, and the physical structure of the HCAs can be tuned by modulating the fabrication approach. Using a postmodification process, the underwater-oil wetting behavior of cylinder-array based surfaces can be easily modulated from the superoleophobic state (an oil contact angle (OCA) of 161°) to oleophilic state (an OCA of 19°). Moreover, the underwater-oil wettability can be reversibly transformed from the superoleophobic state (an OCA of approximately 153°) into the oleophilic state (an OCA of approximately 31°) by grafting stimuli-responsive polymer (PNIPAAm) brushes onto this specific hierarchical structure. Due to the temperature-responsive property, modifying the surface with PNIPAAm provides a possibility to control the oil wettability (repellent or sticky) by temperature, which will benefit the use of HCAs in oil-water separation and other application fields.
Collapse
Affiliation(s)
- Wendong Liu
- State
Key Laboratory of Supramolecular Structure and Materials, College
of Chemistry, Jilin University, Changchun 130012, People’s Republic of China
- Max
Planck Institute for Polymer Research, Ackermannweg 10, D-55128 Mainz, Germany
| | - Siyuan Xiang
- State
Key Laboratory of Supramolecular Structure and Materials, College
of Chemistry, Jilin University, Changchun 130012, People’s Republic of China
- Max
Planck Institute for Polymer Research, Ackermannweg 10, D-55128 Mainz, Germany
| | - Xueyao Liu
- State
Key Laboratory of Supramolecular Structure and Materials, College
of Chemistry, Jilin University, Changchun 130012, People’s Republic of China
| | - Bai Yang
- State
Key Laboratory of Supramolecular Structure and Materials, College
of Chemistry, Jilin University, Changchun 130012, People’s Republic of China
| |
Collapse
|
29
|
Kang SM, Choi JS, An JH. Reliable and Robust Fabrication Rules for Springtail-Inspired Superomniphobic Surfaces. ACS APPLIED MATERIALS & INTERFACES 2020; 12:21120-21126. [PMID: 32297728 DOI: 10.1021/acsami.0c03986] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
We report a reliable and robust method for the fabrication of bioinspired superomniphobic surfaces with precise concave-cap-shaped micropillar arrays. This method includes silicon-based conventional microelectromechanical systems (MEMS) and polymer replication processes. We have elucidated two critical cases of fabrication rules for precise micromachining of a negative-shaped bioinspired silicon master. The fabricated polymeric structure replicated from the semipermanent silicon master based on the design rules exhibited high structural fidelity and robustness. Finally, we validated the superomniphobic properties, structural durability, and long-term stability of the fabricated bioinspired surfaces.
Collapse
Affiliation(s)
- Seong Min Kang
- Department of Mechanical Engineering, Chungnam National University, Daejeon 34134, Republic of Korea
| | - Ji Seong Choi
- Department of Mechanical Engineering, Chungnam National University, Daejeon 34134, Republic of Korea
| | - Joon Hyung An
- Department of Mechanical Engineering, Chungnam National University, Daejeon 34134, Republic of Korea
| |
Collapse
|
30
|
Li C, Jiao Y, Lv X, Wu S, Chen C, Zhang Y, Li J, Hu Y, Wu D, Chu J. In Situ Reversible Tuning from Pinned to Roll-Down Superhydrophobic States on a Thermal-Responsive Shape Memory Polymer by a Silver Nanowire Film. ACS APPLIED MATERIALS & INTERFACES 2020; 12:13464-13472. [PMID: 32100537 DOI: 10.1021/acsami.9b20223] [Citation(s) in RCA: 29] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Shape memory polymer (SMP) surfaces with tunable wettability have attracted extensive attention due to their widespread applications. However, there have been rare reports on in situ tuning wettability with SMP materials. In this paper, we reported a kind of distinct superhydrophobic SMP microconed surface on the silver nanowire (AgNW) film to achieve in situ reversible transition between pinned and roll-down states. The mechanism is taking advantage of the in situ heating functionality of the silver nanowire film by voltage, which provides the transition energy for SMP to achieve the fixation and recovery of temporary shape. It is noteworthy that the reversible transition could be repeated many times (>100 cycles), and we quantitatively investigate the shape memory ability of microcones with varied height and space under different applied voltages. These results show that the tilted microcones could recover its original upright state under a small voltage (4-11 V) in a short time, and the shortest recovery time is about 0.5 min under an applied voltage of ∼10 V. Finally, we utilize SMP microcone arrays with tunable wettability to realize lossless droplet transportation, and the tilted microconed surface also achieves liquid unidirectional transport due to its anisotropic water adhesion force. The robust microconed SMP surface with reversible morphology transitions will have far-ranging applications including droplet manipulation, reprogrammable fog harvesting, and so on.
Collapse
Affiliation(s)
- Chuanzong Li
- School of Instrument Science and Opto-Electronics Engineering, Hefei University of Technology, Hefei 230009, China
| | - Yunlong Jiao
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Xiaodong Lv
- School of Instrument Science and Opto-Electronics Engineering, Hefei University of Technology, Hefei 230009, China
| | - Sizhu Wu
- School of Instrument Science and Opto-Electronics Engineering, Hefei University of Technology, Hefei 230009, China
| | - Chao Chen
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Yiyuan Zhang
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Jiawen Li
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Yanlei Hu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Dong Wu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| | - Jiaru Chu
- CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China
| |
Collapse
|
31
|
Kang SM, Choi JS. Selective Liquid Sliding Surfaces with Springtail-Inspired Concave Mushroom-Like Micropillar Arrays. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2020; 16:e1904612. [PMID: 31833201 DOI: 10.1002/smll.201904612] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/19/2019] [Revised: 11/07/2019] [Indexed: 06/10/2023]
Abstract
Herein, a mushroom-like reentrant structure is proposed, inspired by springtails, to create a selective liquid sliding surface by implementing a simple yet sturdy silicon fabrication and lithography method. The fabricated arrays display high structural fidelity, presenting a novel geometry of a concave tip. The mushroom-like head shape of these structures is found to have superomniphobicity, which is independent of a variation of temperatures for even low surface tension liquids such as mineral oil. A design rule for the novel cap of the proposed structures, which results in a selective liquid sliding property with deionized (DI) water and mineral oil, is also investigated. It is demonstrated that oil starts to slide at a roll-off angle (ROA) 10° and then DI water rolls off at ROA 15° on the same fabricated transparent and flexible surface with repeatable durability.
Collapse
Affiliation(s)
- Seong Min Kang
- Department of Mechanical Engineering, Chungnam National University, Daejeon, 34134, Korea
| | - Ji Seong Choi
- Department of Mechanical Engineering, Chungnam National University, Daejeon, 34134, Korea
| |
Collapse
|
32
|
Cai R, De Smet D, Vanneste M, Nysten B, Glinel K, Jonas AM. One-Step Aqueous Spraying Process for the Fabrication of Omniphobic Fabrics Free of Long Perfluoroalkyl Chains. ACS OMEGA 2019; 4:16660-16666. [PMID: 31616848 PMCID: PMC6788208 DOI: 10.1021/acsomega.9b02583] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/12/2019] [Accepted: 09/17/2019] [Indexed: 06/10/2023]
Abstract
We report on a simple and versatile method for the preparation in one-step of omniphobic textiles, using only aqueous suspensions of silica particles and polyurethane devoid of long perfluoroalkyl chains (C8) that are now legally-banned because of severe environmental concerns. The omniphobic coatings can be applied on different substrates including fabrics, can resist acidic and basic conditions and a moderate number of washing cycles, and repel liquids such as n-octane, dodecane, hexadecane, ethylene glycol, glycerol, olive oil, and water. Analysis of the wetting properties of coated fabrics indicates that the liquid repellence results from the trapping of air in the re-entrant roughness created by aggregates of silica particles, together with the low surface tension of the polyurethane which bears legally accepted short perfluoroalkyl chains (C4). Our study is a significant step forward toward achieving more environmentally-friendly and robust omniphobic textiles.
Collapse
Affiliation(s)
- Ronggang Cai
- Bio
& Soft Matter, Institute of Condensed Matter and Nanosciences, Université catholique de Louvain, Croix du Sud 1/box L7.04.02, 1348 Louvain-la-Neuve, Belgium
| | - David De Smet
- Centexbel, Technologiepark 70, 9052 Zwijnaarde, Belgium
| | | | - Bernard Nysten
- Bio
& Soft Matter, Institute of Condensed Matter and Nanosciences, Université catholique de Louvain, Croix du Sud 1/box L7.04.02, 1348 Louvain-la-Neuve, Belgium
| | - Karine Glinel
- Bio
& Soft Matter, Institute of Condensed Matter and Nanosciences, Université catholique de Louvain, Croix du Sud 1/box L7.04.02, 1348 Louvain-la-Neuve, Belgium
| | - Alain M. Jonas
- Bio
& Soft Matter, Institute of Condensed Matter and Nanosciences, Université catholique de Louvain, Croix du Sud 1/box L7.04.02, 1348 Louvain-la-Neuve, Belgium
| |
Collapse
|
33
|
Movafaghi S, Wang W, Bark DL, Dasi LP, Popat KC, Kota AK. Hemocompatibility of Super-Repellent surfaces: Current and Future. MATERIALS HORIZONS 2019; 6:1596-1610. [PMID: 31903188 PMCID: PMC6941870 DOI: 10.1039/c9mh00051h] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
Virtually all blood-contacting medical implants and devices initiate immunological events in the form of thrombosis and inflammation. Typically, patients receiving such implants are also given large doses of anticoagulants, which pose a high risk and a high cost to the patient. Thus, the design and development of surfaces with improved hemocompatibility and reduced dependence on anticoagulation treatments is paramount for the success of blood-contacting medical implants and devices. In the past decade, the hemocompatibility of super-repellent surfaces (i.e., surfaces that are extremely repellent to liquids) has been extensively investigated because such surfaces greatly reduce the blood-material contact area, which in turn reduces the area available for protein adsorption and blood cell or platelet adhesion, thereby offering the potential for improved hemocompatibility. In this review, we critically examine the progress made in characterizing the hemocompatibility of super-repellent surfaces, identify the unresolved challenges and highlight the opportunities for future research on developing medical implants and devices with super-repellent surfaces.
Collapse
Affiliation(s)
- Sanli Movafaghi
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA
| | - Wei Wang
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA
| | - David L Bark
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA
- School of Biomedical Engineering, Colorado State University, Fort Collins, CO 80523, USA
| | - Lakshmi P Dasi
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH 43210, USA
| | - Ketul C Popat
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA
- School of Biomedical Engineering, Colorado State University, Fort Collins, CO 80523, USA
| | - Arun K Kota
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA
- School of Biomedical Engineering, Colorado State University, Fort Collins, CO 80523, USA
- Department of Chemical & Biological Engineering, Colorado State University, Fort Collins, CO 80523, USA
| |
Collapse
|
34
|
Wang W, Vahabi H, Movafaghi S, Kota AK. Superomniphobic Surfaces with Improved Mechanical Durability: Synergy of Hierarchical Texture and Mechanical Interlocking. ADVANCED MATERIALS INTERFACES 2019; 6:1900538. [PMID: 33042731 PMCID: PMC7546319 DOI: 10.1002/admi.201900538] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/26/2019] [Indexed: 06/11/2023]
Abstract
Due to their unique functionality, superomniphobic surfaces that display extreme repellency toward virtually any liquid, have a wide range of potential applications. However, to date, the mechanical durability of superomniphobic surfaces remains a major obstacle that prevents their practical deployment. In this work, a two-layer design strategy was developed to fabricate superomniphobic surfaces with improved durability via synergistic effect of interconnected hierarchical porous texture and micro/nano-mechanical interlocking. The improved mechanical robustness of these surfaces was assessed through water shear test, ultrasonic washing test, blade scratching test, and Taber abrasion test.
Collapse
Affiliation(s)
| | | | - Sanli Movafaghi
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO, USA
| | - Arun K Kota
- Department of Mechanical Engineering, Department of Chemical and Biological Engineering, School of Biomedical Engineering, School of Advanced Materials Discovery, Colorado State University, Fort Collins, CO 80523, USA
| |
Collapse
|
35
|
Wang H, Zhang Z, Wang Z, Liang Y, Cui Z, Zhao J, Li X, Ren L. Multistimuli-Responsive Microstructured Superamphiphobic Surfaces with Large-Range, Reversible Switchable Wettability for Oil. ACS APPLIED MATERIALS & INTERFACES 2019; 11:28478-28486. [PMID: 31307191 DOI: 10.1021/acsami.9b07941] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
The switchable wettability is essential for widespread applications in droplet manipulation, rewritable liquid patterning, fluid carrying, and so forth. However, it remains difficult to achieve the multistimuli-responsive, large-range, and reversible wetting switching especially for liquids with low surface tensions through surface topographical management. Here, we apply a simple and effective template-free self-assembly strategy to fabricate microstructured superamphiphobic surfaces that can reversibly switch the wetting performance for oil by transforming the surface morphology in response to multiple stimuli of magnetic fields and mechanical strains. Notably, the noticeably different wetting switching of oil triggered by different stimuli is demonstrated. The contact angles of hexadecane droplets on the as-prepared surfaces can be reversibly switched between 150 ± 1° and 38 ± 2° in response to mechanical strains. Furthermore, the underlying mechanism of wetting switching has been further elucidated using mathematical models. Interestingly, these switchable surfaces dramatically demonstrate the ability to transport oil droplets, without requiring lubricating liquid films. This work not only achieves the large-range and reversible wetting switching for oil but also opens new avenues for fabricating tunable superamphiphobic surfaces with transformable mushroom-like microstructures that can be easily extended to microstructure-dependent friction or adhesion control and used in other fields.
Collapse
Affiliation(s)
| | | | - Zuankai Wang
- Department of Mechanical Engineering , City University of Hong Kong , Hong Kong 999077 , People's Republic of China
| | | | | | | | | | | |
Collapse
|
36
|
Trade-off in membrane distillation with monolithic omniphobic membranes. Nat Commun 2019; 10:3220. [PMID: 31324790 PMCID: PMC6642111 DOI: 10.1038/s41467-019-11209-6] [Citation(s) in RCA: 66] [Impact Index Per Article: 13.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/19/2018] [Accepted: 06/23/2019] [Indexed: 01/27/2023] Open
Abstract
Omniphobic membranes are attractive for membrane distillation (MD) because of their superior wetting resistance. However, a design framework for MD membrane remains incomplete, due to the complexity of omniphobic membrane fabrication and the lack of fundamental relationship between wetting resistance and water vapor permeability. Here we present a particle-free approach that enables rapid fabrication of monolithic omniphobic membranes for MD desalination. Our monolithic omniphobic membranes display excellent wetting resistance and water purification performance in MD desalination of hypersaline feedwater containing surfactants. We identify that a trade-off exists between wetting resistance and water vapor permeability of our monolithic MD membranes. Utilizing membranes with tunable wetting resistance and permeability, we elucidate the underlying mechanism of such trade-off. We envision that our fabrication method as well as the mechanistic insight into the wetting resistance-vapor permeability trade-off will pave the way for smart design of MD membranes in diverse water purification applications.
Collapse
|
37
|
Zhong X, Hu H, Yang L, Sheng J, Fu H. Robust Hyperbranched Polyester-Based Anti-Smudge Coatings for Self-Cleaning, Anti-Graffiti, and Chemical Shielding. ACS APPLIED MATERIALS & INTERFACES 2019; 11:14305-14312. [PMID: 30762340 DOI: 10.1021/acsami.8b22447] [Citation(s) in RCA: 33] [Impact Index Per Article: 6.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
In this work, a novel anti-smudge coating system was developed by using hydroxyl-terminated hyperbranched polyester as a coating precursor, mono-hydroxyl-terminated poly(dimethylsiloxane) (PDMS) as an anti-smudge agent, and hexamethylene diisocyanate trimer as a curing agent. The resultant coatings with 0.5 wt % PDMS content incorporated are highly transparent and liquid repellent. They exhibit striking repellency against various liquids and display remarkable self-cleaning performance. Water, hexadecane, salt solution, strong alkali solution, strong acid solution, pump oil, and crude oil could slide off the coated surface without leaving any traces, and the dirt on the coated surface could be readily removed by water or oil. Besides, these coatings show potential application for anti-fingerprint and anti-graffiti due to the exceptional repellency of coated surface against artificial fingerprint liquid, oil-based ink, paint, and water-based smudge. Furthermore, they also possess superb chemical shielding ability and thus endow substrates with remarkable protection against exposure to harsh chemical conditions. Moreover, these coatings are mechanically robust against extensive abrasion, impact, and bending without compromising anti-smudge properties, and they also exhibit excellent adhesion to various substrates. Therefore, these newly developed coatings have tremendous potential for widespread applications.
Collapse
Affiliation(s)
- Ximing Zhong
- School of Chemistry and Chemical Engineering, Guangdong Provincial Key Lab of Green Chemical Product Technology , South China University of Technology , Guangzhou 510640 , P. R. China
| | - Hengfeng Hu
- School of Chemistry and Chemical Engineering, Guangdong Provincial Key Lab of Green Chemical Product Technology , South China University of Technology , Guangzhou 510640 , P. R. China
| | - Lei Yang
- College of Chemistry and Environmental Engineering , Shaoguan University , Shaoguan 512005 , P. R. China
| | - Jie Sheng
- School of Chemistry and Chemical Engineering , Guangzhou University , Guangzhou 510006 , P. R. China
| | - Heqing Fu
- School of Chemistry and Chemical Engineering, Guangdong Provincial Key Lab of Green Chemical Product Technology , South China University of Technology , Guangzhou 510640 , P. R. China
| |
Collapse
|
38
|
Corti G, Schmiesing NC, Barrington GT, Humphreys MG, Sommers AD. Characterization of Methyl-Functionalized Silica Nanosprings for Superhydrophobic and Defrosting Coatings. ACS APPLIED MATERIALS & INTERFACES 2019; 11:4607-4615. [PMID: 30615841 DOI: 10.1021/acsami.8b18873] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Thin non-perfluoroalkoxy superhydrophobic coatings are desirable for heat exchangers because of their lower thermal resistance and reduced environmental concerns. Coatings requirements must also include robustness and longevity and facilitate high defrosting rates in refrigeration applications to warrant their adoption and use. Methyl-functionalized silica nanosprings (SN) possess water droplet static contact angles above 160° with contact angle hysteresis values as low as 6.9° for a sub-micrometer-thick coating. The methyl functional groups render the silica surface hydrophobic, whereas the geometrical and topographical characteristics of the nanosprings make it super-hydrophobic. Results show that SN are capable of removing 95% of the frost from the surface at a lower temperature than the base aluminum substrate. The sub-micrometer SN coating also decreases the time to defrost by ≈1.5 times and can withstand more than 20 frosting-defrosting cycles in a high humidity environment akin to real working conditions for heat exchangers.
Collapse
Affiliation(s)
- Giancarlo Corti
- Department of Mechanical and Manufacturing Engineering , Miami University , Oxford , Ohio 45056 , United States
| | - Nickolas C Schmiesing
- Department of Mechanical and Manufacturing Engineering , Miami University , Oxford , Ohio 45056 , United States
| | - Griffin T Barrington
- Department of Mechanical and Manufacturing Engineering , Miami University , Oxford , Ohio 45056 , United States
| | - Morgan G Humphreys
- Department of Mechanical and Manufacturing Engineering , Miami University , Oxford , Ohio 45056 , United States
| | - Andrew D Sommers
- Department of Mechanical and Manufacturing Engineering , Miami University , Oxford , Ohio 45056 , United States
| |
Collapse
|
39
|
Sun Y, Guo Z. Recent advances of bioinspired functional materials with specific wettability: from nature and beyond nature. NANOSCALE HORIZONS 2019; 4:52-76. [PMID: 32254145 DOI: 10.1039/c8nh00223a] [Citation(s) in RCA: 107] [Impact Index Per Article: 21.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Through 3.7 billion years of evolution and natural selection, plants and animals in nature have ingeniously fulfilled a broad range of fascinating functions to achieve optimized performance in responding and adapting to changes in the process of interacting with complex natural environments. It is clear that the hierarchically organized micro/nanostructures of the surfaces of living organisms decisively manage fascinating and amazing functions, regardless of the chemical components of their building blocks. This conclusion now allows us to elucidate the underlying mechanisms whereby these hierarchical structures have a great impact on the properties of the bulk material. In this review, we mainly focus on advances over the last three years in bioinspired multiscale functional materials with specific wettability. Starting from selected naturally occurring surfaces, manmade bioinspired surfaces with specific wettability are introduced, with an emphasis on the cooperation between structural characteristics and macroscopic properties, including lotus leaf-inspired superhydrophobic surfaces, fish scale-inspired superhydrophilic/underwater superoleophobic surfaces, springtail-inspired superoleophobic surfaces, and Nepenthes (pitcher plant)-inspired slippery liquid-infused porous surfaces (SLIPSs), as well as other multifunctional surfaces that combine specific wettability with mechanical properties, optical properties and the unidirectional transport of liquid droplets. Afterwards, various top-down and bottom-up fabrication techniques are presented, as well as emerging cutting-edge applications. Finally, our personal perspectives and conclusions with regard to the transfer of micro- and nanostructures to engineered materials are provided.
Collapse
Affiliation(s)
- Yihan Sun
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China.
| | | |
Collapse
|
40
|
Ai J, Guo Z. Biomimetic polymeric superamphiphobic surfaces: their fabrication and applications. Chem Commun (Camb) 2019; 55:10820-10843. [DOI: 10.1039/c9cc03813b] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Abstract
In this review, we summarize recent developments in polymeric superamphiphobic surfaces, including their design, fabrication, and potential applications.
Collapse
Affiliation(s)
- Jixin Ai
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials and Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials
- Hubei University
- Wuhan 430062
- People's Republic of China
- State Key Laboratory of Solid Lubrication
| | - Zhiguang Guo
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials and Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials
- Hubei University
- Wuhan 430062
- People's Republic of China
- State Key Laboratory of Solid Lubrication
| |
Collapse
|
41
|
Zhang D, Cheng Z, Liu Y. Smart Wetting Control on Shape Memory Polymer Surfaces. Chemistry 2018; 25:3979-3992. [DOI: 10.1002/chem.201804192] [Citation(s) in RCA: 32] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/16/2018] [Indexed: 01/10/2023]
Affiliation(s)
- Dongjie Zhang
- MIIT Key Laboratory of Critical Materials Technology for New Energy, Conversion and StorageSchool of Chemistry and Chemical EngineeringHarbin Institute of Technology Harbin 150001 P.R. China
| | - Zhongjun Cheng
- Academy of Fundamental and Interdisciplinary SciencesHarbin Institute of Technology Harbin 150090 P.R. China
| | - Yuyan Liu
- MIIT Key Laboratory of Critical Materials Technology for New Energy, Conversion and StorageSchool of Chemistry and Chemical EngineeringHarbin Institute of Technology Harbin 150001 P.R. China
| |
Collapse
|
42
|
Vahabi H, Wang W, Mabry JM, Kota AK. Coalescence-induced jumping of droplets on superomniphobic surfaces with macrotexture. SCIENCE ADVANCES 2018; 4:eaau3488. [PMID: 30430135 PMCID: PMC6226286 DOI: 10.1126/sciadv.aau3488] [Citation(s) in RCA: 52] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/31/2018] [Accepted: 10/05/2018] [Indexed: 05/19/2023]
Abstract
When two liquid droplets coalesce on a superrepellent surface, the excess surface energy is partly converted to upward kinetic energy, and the coalesced droplet jumps away from the surface. However, the efficiency of this energy conversion is very low. In this work, we used a simple and passive technique consisting of superomniphobic surfaces with a macrotexture (comparable to the droplet size) to experimentally demonstrate coalescence-induced jumping with an energy conversion efficiency of 18.8% (i.e., about 570% increase compared to superomniphobic surfaces without a macrotexture). The higher energy conversion efficiency arises primarily from the effective redirection of in-plane velocity vectors to out-of-plane velocity vectors by the macrotexture. Using this higher energy conversion efficiency, we demonstrated coalescence-induced jumping of droplets with low surface tension (26.6 mN m-1) and very high viscosity (220 mPa·s). These results constitute the first-ever demonstration of coalescence-induced jumping of droplets at Ohnesorge number >1.
Collapse
Affiliation(s)
- Hamed Vahabi
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA
| | - Wei Wang
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA
| | - Joseph M. Mabry
- Rocket Propulsion Division, Air Force Research Laboratory, Edwards AFB, CA 93524, USA
| | - Arun K. Kota
- Department of Mechanical Engineering, Colorado State University, Fort Collins, CO 80523, USA
- School of Biomedical Engineering, Colorado State University, Fort Collins, CO 80523, USA
- Department of Chemical Engineering, Colorado State University, Fort Collins, CO 80523 USA
| |
Collapse
|
43
|
Singh N, Kakiuchida H, Sato T, Hönes R, Yagihashi M, Urata C, Hozumi A. Omniphobic Metal Surfaces with Low Contact Angle Hysteresis and Tilt Angles. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:11405-11413. [PMID: 30207475 DOI: 10.1021/acs.langmuir.8b02430] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Various metal (Al, Ti, Fe, Ni, and Cu) surfaces with native oxide layers were rendered "omniphobic" by a simple thermal treatment of neat liquid trimethylsiloxy-terminated polymethylhydrosiloxanes (PMHSs) with a range of different molecular weights (MWs). Because of this treatment, the PMHS chains were covalently attached to the oxidized metal surfaces, giving 2-10 nm thick PMHS layers. The resulting surfaces were fairly smooth, liquid-like, and showed excellent dynamic omniphobicity with both low contact angle hysteresis (≲5°) and substrate tilt angles (≲8°) toward small-volume liquid drops (5 μL) with surface tensions ranging from 20.5 to 72.8 mN/m. Droplet mobility was improved overall as a result of heating the substrates to 70 °C. The reaction kinetics and final dynamic dewetting properties were found to be not dependent of the types of metals employed or MWs of PMHS, but mainly dominated by both reaction temperatures and reaction times.
Collapse
Affiliation(s)
- Narendra Singh
- National Institute of Advanced Industrial Science and Technology (AIST) , 2266-98, Anagahora, Shimoshidami , Moriyama-ku, Nagoya 463-8560 , Japan
| | - Hiroshi Kakiuchida
- National Institute of Advanced Industrial Science and Technology (AIST) , 2266-98, Anagahora, Shimoshidami , Moriyama-ku, Nagoya 463-8560 , Japan
| | - Tomoya Sato
- National Institute of Advanced Industrial Science and Technology (AIST) , 2266-98, Anagahora, Shimoshidami , Moriyama-ku, Nagoya 463-8560 , Japan
| | - Roland Hönes
- National Institute of Advanced Industrial Science and Technology (AIST) , 2266-98, Anagahora, Shimoshidami , Moriyama-ku, Nagoya 463-8560 , Japan
| | - Makoto Yagihashi
- Nagoya Municipal Industrial Research Institute , 3-4-41, Rokuban , Atsuta-ku, Nagoya 456-0058 , Japan
| | - Chihiro Urata
- National Institute of Advanced Industrial Science and Technology (AIST) , 2266-98, Anagahora, Shimoshidami , Moriyama-ku, Nagoya 463-8560 , Japan
| | - Atsushi Hozumi
- National Institute of Advanced Industrial Science and Technology (AIST) , 2266-98, Anagahora, Shimoshidami , Moriyama-ku, Nagoya 463-8560 , Japan
| |
Collapse
|
44
|
Petersen DS, Kleinteich T, Gorb SN, Heepe L. Competing with barnacle cement: wetting resistance of a re-entrant surface reduces underwater adhesion of barnacles. J R Soc Interface 2018; 15:rsif.2018.0396. [PMID: 30135262 DOI: 10.1098/rsif.2018.0396] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2018] [Accepted: 07/24/2018] [Indexed: 12/17/2022] Open
Abstract
Surfaces with re-entrant topographies can repel liquids even of extremely low surface tension, almost independently of the material's inherent wettability. We show that this topography-based wetting resistance can also be applied to underwater applications, reducing the permanent adhesion of marine hardfouling organisms. Having combined a biofouling assay in the marine environment with microscopic analyses, we demonstrate how a synergistic effect of a soft silicone-based material with a re-entrant mushroom-shaped surface topography strongly increases the fouling release ability of such coatings compared with a smooth control made from the same material. Our coating inhibited the complete wetting of the solidifying glues produced by marine organisms, which resulted in a decreased contact area and, consequently, low adhesion. Our work suggests that topography-induced wetting resistance of surfaces may become a viable approach in preventing permanent adhesion of marine hardfouling organisms.
Collapse
Affiliation(s)
- Dennis S Petersen
- Department of Functional Morphology and Biomechanics Zoological Institute, Kiel University, Am Botanischen Garten 1-9, 24098 Kiel, Germany
| | - Thomas Kleinteich
- Department of Functional Morphology and Biomechanics Zoological Institute, Kiel University, Am Botanischen Garten 1-9, 24098 Kiel, Germany
| | - Stanislav N Gorb
- Department of Functional Morphology and Biomechanics Zoological Institute, Kiel University, Am Botanischen Garten 1-9, 24098 Kiel, Germany
| | - Lars Heepe
- Department of Functional Morphology and Biomechanics Zoological Institute, Kiel University, Am Botanischen Garten 1-9, 24098 Kiel, Germany
| |
Collapse
|
45
|
An S, Kim HJ, Chi S, Lee J. Enhanced Adhesion of Polydimethylsiloxane Using an Interlocked Finger Structure. Macromol Rapid Commun 2018; 39:e1800106. [DOI: 10.1002/marc.201800106] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/04/2018] [Revised: 06/02/2018] [Indexed: 01/12/2023]
Affiliation(s)
- Suyeong An
- Department of Chemical Engineering and Materials Science; Chung-Ang University; 221, Heukseok-dong Dongjak-gu Seoul 156-756 Republic of Korea
| | - Hyun Jin Kim
- Department of Chemical Engineering and Materials Science; Chung-Ang University; 221, Heukseok-dong Dongjak-gu Seoul 156-756 Republic of Korea
| | - Sangwon Chi
- Department of Chemical Engineering and Materials Science; Chung-Ang University; 221, Heukseok-dong Dongjak-gu Seoul 156-756 Republic of Korea
| | - Jonghwi Lee
- Department of Chemical Engineering and Materials Science; Chung-Ang University; 221, Heukseok-dong Dongjak-gu Seoul 156-756 Republic of Korea
| |
Collapse
|
46
|
Liu X, Gu H, Wang M, Du X, Gao B, Elbaz A, Sun L, Liao J, Xiao P, Gu Z. 3D Printing of Bioinspired Liquid Superrepellent Structures. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1800103. [PMID: 29603422 DOI: 10.1002/adma.201800103] [Citation(s) in RCA: 73] [Impact Index Per Article: 12.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/04/2018] [Revised: 01/29/2018] [Indexed: 05/18/2023]
Abstract
Bioinspired re-entrant structures have been proved to be effective in achieving liquid superrepellence (including anti-penetration, anti-adhesion, and anti-spreading). However, except for a few reports relying on isotropic etching of silicon wafers, most fluorination-dependent surfaces are still unable to repel liquids with extreme low surface energy (i.e., γ < 15 mN m-1 ), especially those fluorinated solvents. Herein, triply re-entrant structures, possessing superrepellence to water (with surface tension γ of 72.8 mN m-1 ) and various organic liquids (γ = 12.0-27.1 mN m-1 ), are fabricated via two-photon polymerization based 3D printing technology. Such structures can be constructed both on rigid and flexible substrates, and the liquid superrepellent properties can be kept even after oxygen plasma treatment. Based on the prepared triply re-entrant structures, micro open capillaries are constructed on them to realize directional liquid spreading, which may be applied in microfluidic platforms and lab-on-a-chip applications. The fabricated arrays can also find potential applications in electronic devices, gas sensors, microchemical/physical reactors, high-throughput biological sensors, and optical displays.
Collapse
Affiliation(s)
- Xiaojiang Liu
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Hongcheng Gu
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Min Wang
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Xin Du
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Bingbing Gao
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Abdelrahman Elbaz
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Liangdong Sun
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Julong Liao
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Pengfeng Xiao
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Zhongze Gu
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
- Suzhou Key Laboratory of Environment and Biosafety, Research Institute of Southeast University in Suzhou, Suzhou, 215123, China
- National Demonstration Center for Experimental Biomedical Engineering Education, Southeast University, Nanjing, 210096, China
| |
Collapse
|
47
|
Fabrication of Self-healing Superhydrophobic Surfaces from Water-Soluble Polymer Suspensions Free of Inorganic Particles through Polymer Thermal Reconstruction. COATINGS 2018. [DOI: 10.3390/coatings8040144] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
|
48
|
Ren Y, Guo J, Lu Q, Xu D, Qin J, Yan F. Polypropylene Nonwoven Fabric@Poly(ionic liquid)s for Switchable Oil/Water Separation, Dye Absorption, and Antibacterial Applications. CHEMSUSCHEM 2018; 11:1092-1098. [PMID: 29334177 DOI: 10.1002/cssc.201702320] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/07/2017] [Revised: 01/15/2018] [Indexed: 06/07/2023]
Abstract
Pollutants in wastewater include oils, dyes, and bacteria, making wastewater cleanup difficult. Multifunctional wastewater treatment media consisting of poly(ionic liquid)-grafted polypropylene (PP) nonwoven fabrics (PP@PIL) are prepared by a simple and scalable surface-grafting process. The fabricated PP@PIL fabrics exhibit impressive switchable oil/water separation (η>99 %) and dye absorption performance (q=410 mg g-1 ), as well as high antibacterial properties. The oil/water separation can be easily switched by anion exchanging of the PIL segments. Moreover, the multiple functions (oil/water separation, dye absorption, and antibacterial properties) occurred at the same time, and did not interfere with each other. The multifunctional fibrous filter can be easily regenerated by washing with an acid solution, and the absorption capacity is maintained after many recycling tests. These promising features make PIL-grafted PP nonwoven fabric a potential one-step treatment for multicomponent wastewater.
Collapse
Affiliation(s)
- Yongyuan Ren
- State and Local Joint Engineering Laboratory for Novel Functional, Polymeric Materials, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, China
| | - Jiangna Guo
- State and Local Joint Engineering Laboratory for Novel Functional, Polymeric Materials, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, China
| | - Qian Lu
- State and Local Joint Engineering Laboratory for Novel Functional, Polymeric Materials, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, China
| | - Dan Xu
- State and Local Joint Engineering Laboratory for Novel Functional, Polymeric Materials, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, China
| | - Jing Qin
- State and Local Joint Engineering Laboratory for Novel Functional, Polymeric Materials, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, China
| | - Feng Yan
- State and Local Joint Engineering Laboratory for Novel Functional, Polymeric Materials, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, China
| |
Collapse
|
49
|
Zhang D, Cheng Z, Kang H, Yu J, Liu Y, Jiang L. A Smart Superwetting Surface with Responsivity in Both Surface Chemistry and Microstructure. Angew Chem Int Ed Engl 2018; 57:3701-3705. [DOI: 10.1002/anie.201800416] [Citation(s) in RCA: 82] [Impact Index Per Article: 13.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2018] [Revised: 02/05/2018] [Indexed: 01/07/2023]
Affiliation(s)
- Dongjie Zhang
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage; School of Chemistry and Chemical Engineering; Harbin Institute of Technology; Harbin 150001 P. R. China
| | - Zhongjun Cheng
- Academy of Fundamental and Interdisciplinary Sciences; Harbin Institute of Technology; Harbin 150090 P. R. China
| | - Hongjun Kang
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage; School of Chemistry and Chemical Engineering; Harbin Institute of Technology; Harbin 150001 P. R. China
| | - Jianxin Yu
- Center of Analysis and Measurement; Harbin Institute of Technology; Harbin 150090 P. R. China
| | - Yuyan Liu
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage; School of Chemistry and Chemical Engineering; Harbin Institute of Technology; Harbin 150001 P. R. China
| | - Lei Jiang
- Institute of Chemistry; Chinese Academy of Sciences; Beijing 100080 P. R. China
| |
Collapse
|
50
|
Zhang D, Cheng Z, Kang H, Yu J, Liu Y, Jiang L. A Smart Superwetting Surface with Responsivity in Both Surface Chemistry and Microstructure. Angew Chem Int Ed Engl 2018. [DOI: 10.1002/ange.201800416] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Affiliation(s)
- Dongjie Zhang
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage; School of Chemistry and Chemical Engineering; Harbin Institute of Technology; Harbin 150001 P. R. China
| | - Zhongjun Cheng
- Academy of Fundamental and Interdisciplinary Sciences; Harbin Institute of Technology; Harbin 150090 P. R. China
| | - Hongjun Kang
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage; School of Chemistry and Chemical Engineering; Harbin Institute of Technology; Harbin 150001 P. R. China
| | - Jianxin Yu
- Center of Analysis and Measurement; Harbin Institute of Technology; Harbin 150090 P. R. China
| | - Yuyan Liu
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage; School of Chemistry and Chemical Engineering; Harbin Institute of Technology; Harbin 150001 P. R. China
| | - Lei Jiang
- Institute of Chemistry; Chinese Academy of Sciences; Beijing 100080 P. R. China
| |
Collapse
|