Emerging Carbon-Based Heterogeneous Catalysts for Electrochemical Reduction of Carbon Dioxide into Value-Added Chemicals

2D monolayer electrocatalysts for CO2 electroreduction

The electrocatalytic carbon dioxide reduction reaction (CO2RR) is an attractive method for converting atmospheric CO2 into value-added chemicals and fuels. In order to overcome the low efficiency and durability that hinder its practical application, a significant amount of research has been dedicated to designing novel catalysts at the nanoscale and even the atomic scale. Two-dimensional (2D) monolayer materials inherit the merits of both 2D materials and single-atom materials. Through bridging the gap between heterogeneous and homogeneous catalysis, 2D monolayer materials exhibit great potential in the CO2RR due to their unique structural/electronic properties, high atom utilization, low mass transfer resistance and uniform active sites. Here, we systematically overview the development and application of 2D monolayer catalysts for the electrocatalytic CO2RR. First, an overview of the CO2RR technology is presented. Subsequently, a comprehensive discussion is undertaken on various types of 2D monolayer electrocatalysts, such as 2D graphene-based materials, 2D monolayer metal-organic frameworks (MOFs), 2D monolayer covalent organic frameworks (COFs) and 2D monolayer metal-based materials. Their respective electrocatalytic performances are also systematically analyzed. More importantly, novel perspectives on the primary challenges and opportunities associated with the utilization of 2D monolayer materials in the CO2RR are presented. Achieving high-quality 2D monolayer materials and producing highly selective multi-carbon products remain the two major challenges in the design, synthesis and application of 2D monolayer electrocatalysts. Addressing these synthesis-related and performance-related issues is significant for the progression and practical utilization of 2D monolayer materials in the CO2RR.

Transition Metal-Nitrogen-Carbon Single-Atom Catalysts Enhanced CO2 Electroreduction Reaction: A Review

As the global energy crisis and environmental challenges worsen, CO2 conversion has emerged as a focal point in international research. CO2 electroreduction reaction (CO2ER) is a green and sustainable technology that converts CO2 into high-value chemicals, thereby achieving the recycling of carbon resources. However, the activity and selectivity are constrained by the performance of the catalyst. Although traditional N-doped carbon-based catalysts exhibit excellent performance toward CO2ER, the atomic utilization rate in these materials is far from 100 %. Single atom catalysts (SACs) can attain nearly 100 % atomic utilization efficiency because of the fully exposing metal atoms. Therefore, SACs have emerged as one of the hot research materials in the field of CO2ER. Recently, transition metal-nitrogen-carbon single-atom catalysts (TM-N-C SACs) have flourished because of their extraordinary catalytic activity, low cost, and excellent stability, demonstrating enormous application prospects in CO2ER. In this review, we concentrate on TM-N-C SACs that electrochemically reduce CO2 to high value products. A comprehensive and detailed discussion were conducted on the synthesis method, chemical structure, chemical characterization of TM-N-C SACs, as well as their catalytic performance, active sources, and mechanism exploration for CO2ER. Finally, challenges and prospects for commercial application of TM-N-C SACs catalysts suitable for CO2ER are proposed.

Tailoring vinegar residue-derived all-carbon electrodes for efficient electrocatalytic carbon dioxide reduction to formate through heteroatom doping and defect enrichment

Electrocatalytic carbon dioxide reduction (ECO2R) to formate is the most technically and economically feasible approach to achieve electrochemical CO2 value addition. Here, a few-layer graphene is prepared from vinegar residue. Then a series of heteroatom-doped vertical graphene electrodes (X-rGO, X=P/S/N/B/, NS/NP/NB, NSP/NSB/NPB/NSPB) are prepared. The NS-rGO has improved ECO2R to formate selectivity (Faraday Efficiency (FEHCOO-) = 78.7 %) thanks to the synergistic effect between N and S. Carbon quantum dots (CQDs) are introduced into the electrode, the doped heteroatoms are further removed by high-temperature to form the defects-rich electrode (NS-CQDs-rGO-1100), which has better catalytic performance (FEHCOO-=90 %, stability over 10 h) with electrochemical double layer capacitance of 12.5 mF cm-2. The intrinsic effect of heteroatom doping and defects on the ECO2R activity of the electrodes are explored by density functional theory calculation. This work broadens the field of preparation of graphene and opens the door to the development of cost-effective electrocatalysts for efficient ECO2R.

Monolithic Nitrogen-Doped Carbon Electrode with Hierarchical Porous Structure for Efficient Electrochemical CO2 Reduction

N-doped carbon materials have garnered extensive development in electrochemical CO2 reduction due to their abundant sources, high structural plasticity, and excellent catalytic performance. However, the use of powder carbon materials for electrocatalytic reactions limits their current density and mechanical strength, which pose challenges for industrial applications. In this study, we synthesized a monolithic N-doped carbon electrode with high mechanical strength for efficient electrochemical reduction of CO2 to CO through a simple pyrolysis method, using phenolic resin as the precursor and ZIF-8 as the sacrificial template. At 900 °C, the decomposition of ZIF-8 and the volatilization of Zn atoms promote the formation of a hierarchical porous structure in the carbon matrix, characterized by macropores with extended mesoporous channels. Simultaneously, N active species derived from ZIF-8 are effectively generated around the pores and fully exposed. The efficient mass transfer facilitated by the hierarchical porous structure and high activity of exposed nitrogen species enables efficient conversion of CO2 to CO. When the ZIF-8 content is 30%, the catalyst achieves a Faradaic efficiency of 88.9% for CO at a low potential of -0.7 V (vs RHE), with a CO production rate of 244.05 μmol h-1 cm-2. After 50 h of potentiostatic electrolysis, the current density and FECO remain stable. This work not only provides a strategy for the synergistic effects of hierarchical porous structures and nitrogen doping but also offers an effective method to avoid using powder binders and prepare integrated, stable monolithic electrodes.

Manipulation of Oxygen Species on an Antimony-Modified Copper Surface to Tune the Product Selectivity in CO2 Electroreduction

Rational regulation of the electrochemical CO2 reduction reaction (CO2RR) pathway to produce desired products is particularly interesting, yet designing economical and robust catalysts is crucial. Here, we report an antimony-modified copper (CuSb) catalyst capable of selectively producing both CO and multicarbon (C2+) products in the CO2RR. At a current density of 0.3 A/cm2, the faradaic efficiency (FE) of CO was as high as 98.2% with a potential of -0.6 V vs reversible hydrogen electrode (RHE). When the current density increased to 1.1 A/cm2 at -1.1 V vs RHE, the primary products shifted to C2+ compounds with a FE of 75.6%. Experimental and theoretical studies indicate that tuning the potential could manipulate the oxygen species on the CuSb surface, which determined the product selectivity in the CO2RR. At a more positive potential, the existence of oxygen species facilitates the potential-limiting step involving *COOH formation and reduces the adsorption of *CO intermediates, thereby promoting CO production. At a more negative potential, the localized high CO concentration coupled with the enhanced adsorption of *CO intermediates due to Sb incorporation facilitates C-C coupling and deep hydrogenation processes, resulting in an increased C2+ selectivity.

Recent advancements in carbon/metal-based nano-catalysts for the reduction of CO2 to value-added products

Due to the increased human activities in burning of fossil fuels and deforestation, the CO2 level in the atmosphere gets increased up to 415 ppm; although it is an essential component for plant growth, an increased level of CO2 in the atmosphere leads to global warming and catastrophic climate change. Various conventional methods are used to capture and utilize CO2, among that a feasible and eco-friendly technique for creating value-added products is the CO2RR. Photochemical, electrochemical, thermochemical, and biochemical approaches can be used to decrease the level of CO2 in the atmosphere. The introduction of nano-catalysts in the reduction process helps in the efficient conversion of CO2 with improved selectivity, increased efficiency, and also enhanced stability of the catalyst materials. Thus, in this mini-review of nano-catalysts, some of the products formed during the reduction process, like CH3OH, C2H5OH, CO, HCOOH, and CH4, are explained. Among different types of metal catalysts, carbonaceous, single-atom catalysts, and MOF based catalysts play a significant role in the CO2 RR process. The effects of the catalyst material on the surface area, composition, and structural alterations are covered in depth. To aid in the design and development of high-performance nano-catalysts for value-added products, the current state, difficulties, and future prospects are provided.

Porous Bi Nanosheets Derived from β-Bi2O3 for Efficient Electrocatalytic CO2 Reduction to Formate

The electrochemical CO2 reduction reaction (ECO2RR) is a promising strategy for converting CO2 into high-value chemical products. However, the synthesis of effective and stable electrocatalysts capable of transforming CO2 into a specified product remains a huge challenge. Herein, we report a template-regulated strategy for the preparation of a Bi2O3-derived nanosheet catalyst with abundant porosity to achieve the expectantly efficient CO2-to-formate conversion. The resultant porous bismuth nanosheet (p-Bi) not only exhibited marked Faradaic efficiency of formate (FEformate), beyond 91% in a broad potential range from -0.75 to -1.1 V in the H-type cell, but also demonstrated an appreciable FEformate of 94% at a high current density of 262 mA cm-2 in the commercially important gas diffusion cell. State-of-the-art X-ray absorption near edge structure spectroscopy (XANES) and theoretical calculation unraveled the distinct formate production performance of the p-Bi catalyst, which was cocontributed by its smaller size, plentiful porous structure, and stronger Bi-O bond, thus accelerating the absorption of CO2 and promoting the subsequent formation of intermediates. This work provides an avenue to fabricate bismuth-based catalysts with high planar and porous morphologies for a broad portfolio of applications.

Crystalline CdS/Amorphous Cd(OH)2 Composite for Electrochemical CO2 Reduction to CO in a Wide Potential Window

Electrochemical CO2 reduction is a promising method for converting atmospheric CO2 into valuable low-carbon chemicals. In this study, a crystalline cadmium sulfide/amorphous cadmium hydroxide composite was successfully deposited on the carbon paper substrate surface by in-situ chemical bath deposition (named as c-CdS/a-Cd(OH)2/CP electrodes) for the efficient electrochemical CO2 reduction to produce CO. The c-CdS/a-Cd(OH)2/CP electrode exhibited high CO Faradaic efficiencies (>90 %) under a wide potential window of 1.0 V, with the highest value reaching ~100 % at the applied potential ranging from -2.16 V to -2.46 V vs. ferrocene/ferrocenium (Fc/Fc+), superior to the crystalline counterpart c-CdS/CP and c-CdS/c-Cd(OH)2@CP electrodes. Meanwhile, the CO partial current density reached up to 154.7 mA cm-2 at -2.76 V vs. Fc/Fc+ on the c-CdS/a-Cd(OH)2/CP electrode. The excellent performance of this electrode was mainly ascribed to its special three-dimensional structure and the introduction of a-Cd(OH)2. These structures could provide more active sites, accelerate the charge transfer, and enhance adsorption of *COOH intermediates, thereby improving the CO selectivity. Moreover, the electrolytes consisting of 1-butyl-3-methylimidazolium tetrafluoroborate and acetonitrile also enhanced the reaction kinetics of electrochemical CO2 reduction to CO.

Reaction Environment Regulation for Electrocatalytic CO2 Reduction in Acids

The electrocatalytic CO2 reduction reaction (CO2RR) is a sustainable route for converting CO2 into value-added fuels and feedstocks, advancing a carbon-neutral economy. The electrolyte critically influences CO2 utilization, reaction rate and product selectivity. While typically conducted in neutral/alkaline aqueous electrolytes, the CO2RR faces challenges due to (bi)carbonate formation and its crossover to the anolyte, reducing efficiency and stability. Acidic media offer promise by suppressing these processes, but the low Faradaic efficiency, especially for multicarbon (C2+) products, and poor electrocatalyst stability persist. The effective regulation of the reaction environment at the cathode is essential to favor the CO2RR over the competitive hydrogen evolution reaction (HER) and improve long-term stability. This review examines progress in the acidic CO2RR, focusing on reaction environment regulation strategies such as electrocatalyst design, electrode modification and electrolyte engineering to promote the CO2RR. Insights into the reaction mechanisms via in situ/operando techniques and theoretical calculations are discussed, along with critical challenges and future directions in acidic CO2RR technology, offering guidance for developing practical systems for the carbon-neutral community.

Amine-Functionalized Metal-Free Nanocarbon to Boost Selective CO2 Electroreduction to CO in a Flow Cell

Highly efficient electrochemical CO2-to-CO conversion is a promising approach for achieving carbon neutrality. While nonmetallic carbon electrocatalysts have shown potential for CO2-to-CO utilization in H-type cells, achieving efficient conversion in flow cells at an industrial scale remains challenging. In this study, we present a cost-effective synthesis strategy for preparing ultrathin 2D carbon nanosheet catalysts through simple amine functionalization. The optimized catalyst, NCNs-2.5, demonstrates exceptional CO selectivity with a maximum Faradaic efficiency of 98% and achieves a high current density of 55 mA cm-2 in a flow cell. Furthermore, the catalyst exhibits excellent long-term stability, operating continuously for 50 h while maintaining a CO selectivity above 90%. The superior catalytic activity of NCNs-2.5 is attributed to the presence of amine-N active sites within the carbon lattice structure. This work establishes a foundation for the rational design of cost-effective nonmetallic carbon catalysts as sustainable alternatives to metals in energy conversion systems.

Oxygen-Bridged Cu Binuclear Sites for Efficient Electrocatalytic CO2 Reduction to Ethanol at Ultralow Overpotential

Electrocatalytic CO2 reduction (CO2RR) to alcohols offers a promising strategy for converting waste CO2 into valuable fuels/chemicals but usually requires large overpotentials. Herein, we report a catalyst comprising unique oxygen-bridged Cu binuclear sites (CuOCu-N4) with a Cu···Cu distance of 3.0-3.1 Å and concomitant conventional Cu-N4 mononuclear sites on hierarchical nitrogen-doped carbon nanocages (hNCNCs). The catalyst exhibits a state-of-the-art low overpotential of 0.19 V (versus reversible hydrogen electrode) for ethanol and an outstanding ethanol Faradaic efficiency of 56.3% at an ultralow potential of -0.30 V, with high-stable Cu active-site structures during the CO2RR as confirmed by operando X-ray adsorption fine structure characterization. Theoretical simulations reveal that CuOCu-N4 binuclear sites greatly enhance the C-C coupling at low potentials, while Cu-N4 mononuclear sites and the hNCNC support increase the local CO concentration and ethanol production on CuOCu-N4. This study provides a convenient approach to advanced Cu binuclear site catalysts for CO2RR to ethanol with a deep understanding of the mechanism.

Spatial Heterogeneity and Strong Coupling of FeII /FeIII in an Individual Metal-Organic Framework Nanoparticle for Efficient CO2 Photoreduction

The synthesis and characterization of an FeII /FeIII metal-organic framework (MOF) nanocrystal with spatial heterogeneity that arises from the non-uniform distribution of different valence states is disclosed. The FeII /FeIII -Ni Prussian blue analog (PBA) delivers superior photocatalytic performance in the selective CO2 reduction reaction thanks to the strong FeII /FeIII coupling, with CO yield up to 12.27 mmol g-1 h-1 and 90.6% selectivity under visible-light irradiation. Density functional theory calculation and experimental studies prove that the spatial heterogeneity of FeII /FeIII in the individual MOF nanocrystal not only directs and expedites the charge transfer within a catalyst particle but also creates the heterogeneity of catalytically-active Ni sites for efficient CO2 photoreduction. The current findings add to a growing literature of materials with compositional heterogeneity and provide a reference for future research.

Highly selective photoelectrochemical CO2 reduction by crystal phase-modulated nanocrystals without parasitic absorption

Photoelectrochemical (PEC) carbon dioxide (CO2) reduction (CO2R) holds the potential to reduce the costs of solar fuel production by integrating CO2 utilization and light harvesting within one integrated device. However, the CO2R selectivity on the photocathode is limited by the lack of catalytic active sites and competition with the hydrogen evolution reaction. On the other hand, serious parasitic light absorption occurs on the front-side-illuminated photocathode due to the poor light transmittance of CO2R cocatalyst films, resulting in extremely low photocurrent density at the CO2R equilibrium potential. This paper describes the design and fabrication of a photocathode consisting of crystal phase-modulated Ag nanocrystal cocatalysts integrated on illumination-reaction decoupled heterojunction silicon (Si) substrate for the selective and efficient conversion of CO2. Ag nanocrystals containing unconventional hexagonal close-packed phases accelerate the charge transfer process in CO2R reaction, exhibiting excellent catalytic performance. Heterojunction Si substrate decouples light absorption from the CO2R catalyst layer, preventing the parasitic light absorption. The obtained photocathode exhibits a carbon monoxide (CO) Faradaic efficiency (FE) higher than 90% in a wide potential range, with the maximum FE reaching up to 97.4% at -0.2 V vs. reversible hydrogen electrode. At the CO2/CO equilibrium potential, a CO partial photocurrent density of -2.7 mA cm-2 with a CO FE of 96.5% is achieved in 0.1 M KHCO3 electrolyte on this photocathode, surpassing the expensive benchmark Au-based PEC CO2R system.

C2 Product Formation over the C1 Product and HER on the 111 Plane of Specific Cu Alloy Nanoparticles Identified through Multiparameter Optimization

C2 products are more desirable than C1 products during CO2 electroreduction (CO2ER) because the former possess higher energy density and greater industrial value. For CO2ER, Cu is a well-known catalyst, but the selectivity toward C2 products is still a big challenge for researchers due to complex intermediates, different final products, and large space of the catalyst due to its morphology, plane, size, host surface etc. Using density functional theory (DFT) calculations, we find that alloying of Cu nanoparticles can help to enhance the selectivity toward C2 products during CO2ER with a low overpotential. By a systematic investigation of 111 planes (which prefer the C1 product in the case of bulk Cu), the alloys show the generation of C2 products via *CO-*CO dimerization (* indicates adsorbed state). It also suppresses the counter-pathway of hydrogenation of *CO to *CHO, which leads to C1 products. Further, we find that *CH2CHO is the bifurcating intermediate to distinguish between ethanol and ethylene as the final product. We have used simple graphical construction to identify the catalyst for CO2ER over HER, and vice versa. We have also defined the case of hydrogen poisoning and projected a parity plot to recognize the catalyst for C2 product evolution over the C1 product. Our study reveals that Cu-Ag and Cu-Zn catalysts selectively promote ethanol production on 111 planes. Moreover, an edge-doped 2SO2 graphene nanoribbon as the host layer further lowers the barrier and selectively promotes ethanol on Cu38- and Cu79-based alloys. This work provides new theoretical insights into designing Cu-based nanoalloy catalysts for C2 product formation on the 111 plane.

Revealing a Double-Volcano-Like Structure-Activity Relationship for Substitution-Functionalized Metal-Phthalocyanine Catalysts toward Electrochemical CO2 Reduction

Electron-donating/-withdrawing groups (EDGs/EWGs) substitution is widely used to regulate the catalytic performance of transition-metal phthalocyanine (MPc) toward electrochemical CO2 reduction, but the corresponding structure-activity relationships and regulation mechanisms are still ambiguous. Herein, by investigating a series of substitution-functionalized MPc (MPc-X), this work reveals a double-volcano-like relationship between the electron-donating/-withdrawing abilities of the substituents and the catalytic activities of MPc-X. The weak-EDG/-EWG substitution enhances whereas the strong-EDG/-EWG substitution mostly lowers the CO selectivity of MPc. Experimental and calculation results demonstrate that the electronic properties of the substituents influence the symmetry and energy of the highest occupied molecular orbitals of MPc-X, which in turn determine the CO2 adsorption/activation and lead to diverse CO2 reduction pathways on the EWG or EDG substituted MPc via different CO2 adsorption modes. This work provides mechanism insights that could be guidance for the design and regulation of molecular catalysts.

CO2 Reduction to Methane and Ethylene on a Single-Atom Catalyst: A Grand Canonical Quantum Mechanics Study

In recent years, two-dimensional metal-organic frameworks (2D MOF) have attracted great interest for their ease of synthesis and for their catalytic activities and semiconducting properties. The appeal of these materials is that they are layered and easily exfoliated to obtain a monolayer (or few layer) material with interesting optoelectronic properties. Moreover, they have great potential for CO2 reduction to obtain solar fuels with more than one carbon atom, such as ethylene and ethanol, in addition to methane and methanol. In this paper, we explore how a particular class of 2D MOF based on a phthalocyanine core provides the reactive center for the production of ethylene and ethanol. We examine the reaction mechanism using the new grand canonical potential kinetics (GCP-K) or grand canonical quantum mechanics (GC-QM) computational methodology, which obtains reaction rates at constant applied potential to compare directly with experimental results (rather than at constant electrons as in standard QM). We explain the reaction mechanism underlying the formation of methane and ethylene. Here, the key reaction step is direct coupling of CO into CHO, without the usual rate-determining CO-CO dimerization step observed on Cu metal surfaces. Indeed, the 2D MOF behaves like a single-atom catalyst.

Dual-Site Metal Catalysts for Electrocatalytic CO2 Reduction Reaction

Electrocatalytic CO2 reduction reaction (CO2 RR) is a promising and green approach for reducing atmospheric CO2 concentration and achieving high-valued conversion of CO2 under the carbon-neutral policy. In CO2 RR, the dual-site metal catalysts (DSMCs) have received wide attention for their ingenious design strategies, abundant active sites, and excellent catalytic performance attributed to the synergistic effect between dual-site in terms of activity, selectivity and stability, which plays a key role in catalytic reactions. This review provides a systematic summary and detailed classification of DSMCs for CO2 RR, describes the mechanism of synergistic effects in catalytic reactions, and also introduces in situ characterization techniques commonly used in CO2 RR. Finally, the main challenges and prospects of dual-site metal catalysts and even multi-site catalysts for CO2 recycling are analyzed. It is believed that based on the understanding of bimetallic site catalysts and synergistic effects in CO2 RR, well-designed high-performance, low-cost electrocatalysts are promising for achieving CO2 conversion, electrochemical energy conversion and storage in the future.

In situ Electropolymerized 3D Microporous Cobalt-Porphyrin Nanofilm for Highly Effective Molecular Electrocatalytic Reduction of Carbon Dioxide

Electrocatalytic CO2 reduction reaction (CO2 RR) based on molecular catalysts, for example, cobalt porphyrin, is promising to enhance the carbon cycle and mitigate current climate crisis. However, the electrocatalytic performance and accurate evaluations remain problems because of either the low loading amount or the low utilization rate of the electroactive CoN4 sites. Herein a monomer is synthesized, cobalt(II)-5,10,15,20-tetrakis(3,5-di(thiophen-2-yl)phenyl)porphyrin (CoP), electropolymerized onto carbon nanotubes (CNTs) networks, affording a molecular electrocatalyst of 3D microporous nanofilm (EP-CoP, 2-3 nm thickness) with highly dispersed CoN4 sites. The new electrocatalyst shortens the electron transfer pathway, accelerates the redox kinetics of CoN4 sites, and improves the durability of the electrocatalytic CO2 RR. From the intrinsic redox behavior of CoN4 sites, the effective utilization rate is obtained as 13.1%, much higher than that of the monomer assembled electrode (5.8%), and the durability is also promoted dramatically (>40 h) in H-type cells. In commercial flow cells, EP-CoP can achieve a faradic efficiency for CO (FECO ) over 92% at an overpotential of 160 mV. At a higher overpotential of 620 mV, the working current density can reach 310 mA cm-2 with a high FECO of 98.6%, representing the best performance for electrodeposited molecular porphyrin electrocatalysts.

In-modified Sn-MOFs with high catalytic performance in formate electrosynthesis from aqueous carbon dioxide

Electrochemical reduction of carbon dioxide (CO2ER) has become an effective solution to relieve the energy crisis and tackle climate change. In this study, a series of tin-based organic frameworks modified by In (Sn-MOF/Inx) were successfully synthesized via a simple hydrothermal method and explored for high formate-selective CO2ER. The pure Sn-MOF exhibits maximum formate selectivity with a faradaic efficiency (FEformate) of approximately 85.0% and a current density of 15 mA cm-2 at -1.16 VRHE, while the In (6%)-modified Sn-MOF (Sn-MOF/In6) delivers a much higher maximum FEformate (around 97.5%) and a current density of 16 mA cm-2 at -0.96 VRHE. Remarkably, the Sn-MOF/In6 exhibits a significantly larger specific surface area (183.3 m2 g-1) compared to the Sn-MOF (65.2 m2 g-1). These findings indicate that introducing In, an alien element with a slightly different outer orbital electron number from that of Sn, can significantly boost the selectivity and activity for CO2ER to formate. This study presents an efficient way to modify MOF catalysts through a well-designed introducing process.

Covalent Organic Frameworks for Energy Conversion in Photocatalysis

Intensifying energy crises and severe environmental issues have led to the discovery of renewable energy sources, sustainable energy conversion, and storage technologies. Photocatalysis is a green technology that converts eco-friendly solar energy into high-energy chemicals. Covalent organic frameworks (COFs) are porous materials constructed by covalent bonds that show promising potential for converting solar energy into chemicals owing to their pre-designable structures, high crystallinity, and porosity. Herein, we highlight recent progress in the synthesis of COF-based photocatalysts and their applications in water splitting, CO2 reduction, and H2 O2 production. The challenges and future opportunities for the rational design of COFs for advanced photocatalysts are discussed. This Review is expected to promote further development of COFs toward photocatalysis.

Curvature Effect of Pyridinic N-Modified Carbon Atom Sites for Electrocatalyzing CO2 Conversion to CO

Carbon material is considered a promising electrocatalyst for the CO2 reduction reaction (CO2RR); especially, N-doped carbon material shows high CO Faradic efficiency (FECO) when using pyridinic N species as the active site. However, in the past decade, more efforts were focused on the preparation of various carbon nanostructures containing abundant pyridinic N species and few researchers studied the electronic structure modulation of the pyridinic N site. The curvature of the carbon substrate is an easily controllable parameter for modulating the local electronic environment of catalytic sites. In this research, carbon nanotubes (CNTs) with different diameters are applied to modulate the electronic environment of pyridinic N by the curvature effect. The pyridinic N sites doped on CNTs with the average curvature of 0.04 show almost 100% FECO at the current density of 3 mA cm-2 at -0.6 V vs RHE and 91% FECO retention after 12 h test, which is superior to most of the carbon-based electrocatalysts. As demonstrated by density functional theory simulation, the pyridinic N site forms a strong local electric field around the nearby C active site and protrudes out of the curved CNT surface like a tip, which remarkably enriches the protons around the adsorbed CO2 molecule.

Cu-based high-entropy two-dimensional oxide as stable and active photothermal catalyst

Cu-based nanocatalysts are the cornerstone of various industrial catalytic processes. Synergistically strengthening the catalytic stability and activity of Cu-based nanocatalysts is an ongoing challenge. Herein, the high-entropy principle is applied to modify the structure of Cu-based nanocatalysts, and a PVP templated method is invented for generally synthesizing six-eleven dissimilar elements as high-entropy two-dimensional (2D) materials. Taking 2D Cu₂Zn₁Al_0.5Ce₅Zr_0.5O_x as an example, the high-entropy structure not only enhances the sintering resistance from 400 °C to 800 °C but also improves its CO₂ hydrogenation activity to a pure CO production rate of 417.2 mmol g^-1 h^-1 at 500 °C, 4 times higher than that of reported advanced catalysts. When 2D Cu₂Zn₁Al_0.5Ce₅Zr_0.5O_x are applied to the photothermal CO₂ hydrogenation, it exhibits a record photochemical energy conversion efficiency of 36.2%, with a CO generation rate of 248.5 mmol g^-1 h^-1 and 571 L of CO yield under ambient sunlight irradiation. The high-entropy 2D materials provide a new route to simultaneously achieve catalytic stability and activity, greatly expanding the application boundaries of photothermal catalysis.

Revisiting the Role of Discharge Products in Li-CO2 Batteries

Rechargeable lithium-carbon dioxide (Li-CO2 ) batteries are promising devices for CO2 recycling and energy storage. However, thermodynamically stable and electrically insulating discharge products (DPs) (e.g., Li2 CO3 ) deposited at cathodes require rigorous conditions for completed decomposition, resulting in large recharge polarization and poor battery reversibility. Although progress has been achieved in cathode design and electrolyte optimization, the significance of DPs is generally underestimated. Therefore, it is necessary to revisit the role of DPs in Li-CO2 batteries to boost overall battery performance. Here, a critical and systematic review of DPs in Li-CO2 batteries is reported for the first time. Fundamentals of reactions for formation and decomposition of DPs are appraised; impacts on battery performance including overpotential, capacity, and stability are demonstrated; and the necessity of discharge product management is highlighted. Practical in situ/operando technologies are assessed to characterize reaction intermediates and the corresponding DPs for mechanism investigation. Additionally, achievable control measures to boost the decomposition of DPs are evidenced to provide battery design principles and improve the battery performance. Findings from this work will deepen the understanding of electrochemistry of Li-CO2 batteries and promote practical applications.

Retrospective insights into recent MXene-based catalysts for CO2 electro/photoreduction: how far have we gone?

The electro/photocatalytic CO₂ reduction reaction (CO₂RR) is a long-term avenue toward synthesizing renewable fuels and value-added chemicals, as well as addressing the global energy crisis and environmental challenges. As a result, current research studies have focused on investigating new materials and implementing numerous fabrication approaches to increase the catalytic performances of electro/photocatalysts toward the CO₂RR. MXenes, also known as 2D transition metal carbides, nitrides, and carbonitrides, are intriguing materials with outstanding traits. Since their discovery in 2011, there has been a flurry of interest in MXenes in electrocatalysis and photocatalysis, owing to their several benefits, including high mechanical strength, tunable structure, surface functionality, high specific surface area, and remarkable electrical conductivity. Herein, this review serves as a milestone for the most recent development of MXene-based catalysts for the electrocatalytic and photocatalytic CO₂RR. The overall structure of MXenes is described, followed by a summary of several synthesis pathways classified as top-down and bottom-up approaches, including HF-etching, in situ HF-formation, electrochemical etching, and halogen etching. Additionally, the state-of-the-art development in the field of both the electrocatalytic and photocatalytic CO₂RR is systematically reviewed. Surface termination modulation and heterostructure engineering of MXene-based electro/photocatalysts, and insights into the reaction mechanism for the comprehension of the structure-performance relationship from the CO₂RR via density functional theory (DFT) have been underlined toward activity enhancement. Finally, imperative issues together with future perspectives associated with MXene-based electro/photocatalysts are proposed.

MOF-derived transition metal-based catalysts for the electrochemical reduction of CO2 to CO: a mini review

The excessive emission of CO₂ derived from the consumption of fossil fuels has caused severe energy and environmental crises. The electrochemical reduction of CO₂ into value-added products such as CO not only reduces the CO₂ concentration in the atmosphere but also promotes sustainable development in chemical engineering. Thus, tremendous work has been devoted to developing highly efficient catalysts for the selective CO₂ reduction reaction (CO₂RR). Recently, MOF-derived transition metal-based catalysts have shown great potential for the CO₂RR due to their various compositions, adjustable structures, competitive ability, and acceptable cost. Herein, based on our work, a mini-review is proposed for an MOF-derived transition metal-based catalyst for the electrochemical reduction of CO₂ to CO. The catalytic mechanism of the CO₂RR was first introduced, and then we summarized and analyzed the MOF-derived transition metal-based catalysts in terms of MOF-derived single atomic metal-based catalysts and MOF-derived metal nanoparticle-based catalysts. Finally, we present the challenges and perspectives for the subject topic. Hopefully, this review could be helpful and instructive for the design and application of MOF-derived transition metal-based catalysts for the selective CO₂RR to CO.

Electrochemical C-N coupling of CO2 and nitrogenous small molecules for the electrosynthesis of organonitrogen compounds

Electrochemical C-N coupling reactions based on abundant small molecules (such as CO₂ and N₂) have attracted increasing attention as a new "green synthetic strategy" for the synthesis of organonitrogen compounds, which have been widely used in organic synthesis, materials chemistry, and biochemistry. The traditional technology employed for the synthesis of organonitrogen compounds containing C-N bonds often requires the addition of metal reagents or oxidants under harsh conditions with high energy consumption and environmental concerns. By contrast, electrosynthesis avoids the use of other reducing agents or oxidants by utilizing "electrons", which are the cleanest "reagent" and can reduce the generation of by-products, consistent with the atomic economy and green chemistry. In this study, we present a comprehensive review on the electrosynthesis of high value-added organonitrogens from the abundant CO₂ and nitrogenous small molecules (N₂, NO, NO₂^-, NO₃^-, NH₃, etc.) via the C-N coupling reaction. The associated fundamental concepts, theoretical models, emerging electrocatalysts, and value-added target products, together with the current challenges and future opportunities are discussed. This critical review will greatly increase the understanding of electrochemical C-N coupling reactions, and thus attract research interest in the fixation of carbon and nitrogen.

Defective Metal Oxides: Lessons from CO2 RR and Applications in NOx RR

Sluggish reaction kinetics and the undesired side reactions (hydrogen evolution reaction and self-reduction) are the main bottlenecks of electrochemical conversion reactions, such as the carbon dioxide and nitrate reduction reactions (CO₂ RR and NO₃ RR). To date, conventional strategies to overcome these challenges involve electronic structure modification and modulation of the charge-transfer behavior. Nonetheless, key aspects of surface modification, focused on boosting the intrinsic activity of active sites on the catalyst surface, are yet to be fully understood. Engingeering of oxygen vacancies (OVs) can tune surface/bulk electronic structure and improve surface active sites of electrocatalysts. The continuous breakthroughs and significant progress in the last decade position engineering of OVs as a potential technique for advancing electrocatalysis. Motivated by this, the state-of-the-art findings of the roles of OVs in both the CO₂ RR and the NO₃ RR are presented. The review starts with a description of approaches to constructing and techniques for characterizing OVs. This is followed by an overview of the mechanistic understanding of the CO₂ RR and a detailed discussion on the roles of OVs in the CO₂ RR. Then, insights into the NO₃ RR mechanism and the potential of OVs on NO₃ RR based on early findings are highlighted. Finally, the challenges in designing CO₂ RR/NO₃ RR electrocatalysts and perspectives in studying OV engineering are provided.

A rational design of functional porous frameworks for electrocatalytic CO2 reduction reaction

The electrocatalytic CO₂ reduction reaction (ECO₂RR) is considered one of the approaches with the most potential to achieve lower carbon emissions in the future, but a huge gap still exists between the current ECO₂RR technology and industrial applications. Therefore, the design and preparation of catalysts with satisfactory activity, selectivity and stability for the ECO₂RR have attracted extensive attention. As a classic type of functional porous framework, crystalline porous materials (e.g., metal organic frameworks (MOFs) and covalent organic frameworks (COFs)) and derived porous materials (e.g., MOF/COF composites and pyrolysates) have been regarded as superior catalysts for the ECO₂RR due to their advantages such as designable porosity, modifiable skeleton, flexible active site structure, regulable charge transfer pathway and controllable morphology. Meanwhile, with the rapid development of nano-characterization and theoretical calculation technologies, the structure-activity relationships of functional porous frameworks have been comprehensively considered, i.e., metallic element type, local coordination environment, and microstructure, corresponding to selectivity, activity and mass transfer efficiency for the ECO₂RR, respectively. In this review, the rational design strategy for functional porous frameworks is briefly but precisely generalized based on three key factors including metallic element type, local coordination environment, and microstructure. Then, details about the structure-activity relationships for functional porous frameworks are illustrated in the order of MOFs, COFs, composites and pyrolysates to analyze the effect of the above-mentioned three factors on their ECO₂RR performance. Finally, the challenges and perspectives of functional porous frameworks for the further development of the ECO₂RR are reasonably proposed, aiming to offer insights for future studies in this intriguing and significant research field.

Recent Progress in Surface-Defect Engineering Strategies for Electrocatalysts toward Electrochemical CO2 Reduction: A Review

Climate change, caused by greenhouse gas emissions, is one of the biggest threats to the world. As per the IEA report of 2021, global CO2 emissions amounted to around 31.5 Gt, which increased the atmospheric concentration of CO2 up to 412.5 ppm. Thus, there is an imperative demand for the development of new technologies to convert CO2 into value-added feedstock products such as alcohols, hydrocarbons, carbon monoxide, chemicals, and clean fuels. The intrinsic properties of the catalytic materials are the main factors influencing the efficiency of electrochemical CO2 reduction (CO2-RR) reactions. Additionally, the electroreduction of CO2 is mainly affected by poor selectivity and large overpotential requirements. However, these issues can be overcome by modifying heterogeneous electrocatalysts to control their morphology, size, crystal facets, grain boundaries, and surface defects/vacancies. This article reviews the recent progress in electrochemical CO2 reduction reactions accomplished by surface-defective electrocatalysts and identifies significant research gaps for designing highly efficient electrocatalytic materials.

Exfoliated 2D Layered and Nonlayered Metal Phosphorous Trichalcogenides Nanosheets as Promising Electrocatalysts for CO2 Reduction

Two-dimensional (2D) materials catalysts provide an atomic-scale view on a fascinating arena for understanding the mechanism of electrocatalytic carbon dioxide reduction (CO₂ ECR). Here, we successfully exfoliated both layered and nonlayered ultra-thin metal phosphorous trichalcogenides (MPCh₃ ) nanosheets via wet grinding exfoliation (WGE), and systematically investigated the mechanism of MPCh₃ as catalysts for CO₂ ECR. Unlike the layered CoPS₃ and NiPS₃ nanosheets, the active Sn atoms tend to be exposed on the surfaces of nonlayered SnPS₃ nanosheets. Correspondingly, the nonlayered SnPS₃ nanosheets exhibit clearly improved catalytic activity, showing formic acid selectivity up to 31.6 % with -7.51 mA cm^-2 at -0.65 V vs. RHE. The enhanced catalytic performance can be attributed to the formation of HCOO* via the first proton-electron pair addition on the SnPS₃ surface. These results provide a new avenue to understand the novel CO₂ ECR mechanism of Sn-based and MPCh₃ -based catalysts.

Effects of ligand tuning and core doping of atomically precise copper nanoclusters on CO2 electroreduction selectivity

Atomically precise nanoclusters (NCs) provide opportunities for correlating the structure and electrocatalytic properties at atomic level. Herein, we report the single-atom doping effect and ligand effect on CO₂ electroreduction (eCO₂RR) by comparing monogold-doped Au₁Cu₂₄ and homocopper Cu₂₅ NCs protected by triphenylphosphine or/and tris(4-fluorophenyl)phosphine. Catalytic results revealed that the electronic distribution of Cu₂₅ NCs is enormously contracted by doping Au atoms, entitling it to exhibit the unique inhibition of hydrogen evolution reaction. And the inductive effect of ligand strongly favors the formation of formate in eCO₂RR. Overall, this work will provide guidance for the rational design of the copper-based catalysts in the eCO₂RR.

Selective CO2 electroreduction to methanol via enhanced oxygen bonding

The reduction of carbon dioxide using electrochemical cells is an appealing technology to store renewable electricity in a chemical form. The preferential adsorption of oxygen over carbon atoms of intermediates could improve the methanol selectivity due to the retention of C-O bond. However, the adsorbent-surface interaction is mainly related to the d states of transition metals in catalysts, thus it is difficult to promote the formation of oxygen-bound intermediates without affecting the carbon affinity. This paper describes the construction of a molybdenum-based metal carbide catalyst that promotes the formation and adsorption of oxygen-bound intermediates, where the sp states in catalyst are enabled to participate in the bonding of intermediates. A high Faradaic efficiency of 80.4% for methanol is achieved at -1.1 V vs. the standard hydrogen electrode.

The Advance and Critical Functions of Energetic Carbon Dots in Carbon Dioxide Photo/Electroreduction Reactions

As a unique carbon-based nano material, carbon dots (CDs) have attracted great attention because of their special structures and properties, and have been widely used in various fields, such as bio-imaging technology, catalyst design, pollutant degradation, chemical analysis, clean energy development and so on. CDs are used as catalysts or cocatalysts for multiple energy conversion reactions due to their advantages of valid visible light utilization, fast transmission of charge carriers, excellent catalytic activity, and good electrical conductivity. This review first summarizes the basic structure and properties of CDs. The advance and critical functions of energetic CDs in carbon dioxide photo/electroreduction reactions are discussed in detail. Due to the excellent optical absorption, electron transfer properties and good conductivity of CDs, they can enhance catalytic activity and stability effectively. In the end, the existing problems and future development opportunities of CDs-based catalysts in CO₂ reduction reaction are proposed and outlined.

Fight for carbon neutrality with state-of-the-art negative carbon emission technologies

After the Industrial Revolution, the ever-increasing atmospheric CO2 concentration has resulted in significant problems for human beings. Nearly all countries in the world are actively taking measures to fight for carbon neutrality. In recent years, negative carbon emission technologies have attracted much attention due to their ability to reduce or recycle excess CO2 in the atmosphere. This review summarizes the state-of-the-art negative carbon emission technologies, from the artificial enhancement of natural carbon sink technology to the physical, chemical, or biological methods for carbon capture, as well as CO2 utilization and conversion. Finally, we expound on the challenges and outlook for improving negative carbon emission technology to accelerate the pace of achieving carbon neutrality.

Design strategy of a Cu-based catalyst for optimizing the performance in the electrochemical CO2 reduction reaction to multicarbon alcohols

The electrochemical CO₂ reduction reaction (ECRR) is a promising method to reduce excessive CO₂ emissions and achieve a sustainable carbon cycle. Due to the high reaction kinetics and efficiency, copper-based catalysts have shown great application potential for preparing multicarbon (C₂₊) products. C₂₊ alcohols have high economic value and use-value, playing an essential role in modern industry. Therefore, we summarize the latest research progress of the ECRR to synthesize C₂₊ alcohols on Cu-based catalysts and discuss the state-of-the-art catalyst design strategies to improve CO₂ reduction performance. Moreover, we analyzed in detail the specific reaction pathways for the conversion of CO₂ to C₂₊ alcohols based on DFT calculations. Finally, we propose the problems and possible solutions for synthesizing C₂₊ alcohols with copper-based catalysts. We hope that this review can provide ideas for devising ECRR catalysts for C₂₊ alcohols.

Atomistic Understanding of Two-dimensional Electrocatalysts from First Principles

Two-dimensional electrocatalysts have attracted great interest in recent years for renewable energy applications. However, the atomistic mechanisms are still under debate. Here we review the first-principles studies of the atomistic mechanisms of common 2D electrocatalysts. We first introduce the first-principles models for studying heterogeneous electrocatalysis then discuss the common 2D electrocatalysts with a focus on N doped graphene, single metal atoms in graphene, and transition metal dichalcogenides. The reactions include hydrogen evolution, oxygen evolution, oxygen reduction, and carbon dioxide reduction. Finally, we discuss the challenges and the future directions to improve the fundamental understanding of the 2D electrocatalyst at atomic level.

Ultrasmall Cu Nanocrystals Dispersed in Nitrogen-Doped Carbon as Highly Efficient Catalysts for CO2 Electroreduction

The electroreduction of carbon dioxide (CO₂) to a liquid product is a viable method for establishing an artificial carbon cycle. Unfortunately, most electrocatalysts' low efficiency and instability prevent them from being used in practical applications. In the current study, we developed ultrasmall Cu nanocrystals embedded in nitrogen-doped carbon nanosheets (Cu/NC-NSs) for selective CO₂ electroreduction by adjusting the potential. Cu/NC-NSs had 43.7 and 63.5% Faradaic efficiencies for the synthesis of ethanol and formate with applied potentials of -0.37 and -0.77 V vs reversible hydrogen electrode (RHE) using a flow cell architecture, respectively. Moreover, these Cu/NC-NSs show a steady catalytic performance up to 16 h. Density functional theory (DFT) calculations were performed to investigate the reaction mechanism. Furthermore, the synergistic effect formed by nitrogen-doped carbon and highly dispersed copper atoms led to their excellent performance in CO₂ electroreduction.

CO2 Electroreduction over Metallic Oxide, Carbon-Based, and Molecular Catalysts: A Mini-Review of the Current Advances

Electrochemical CO2 reduction reaction (CO2RR) is one of the most challenging targets of current energy research. Multi-electron reduction with proton-coupled reactions is more thermodynamically favorable, leading to diverse product distribution. This requires the design of stable electroactive materials having selective product generation and low overpotentials. In this review, we have explored different CO2RR electrocatalysts in the gas phase and H-cell configurations. Five groups of electrocatalysts ranging from metals and metal oxide, single atom, carbon-based, porphyrins, covalent, metal–organic frameworks, and phthalocyanines-based electrocatalysts have been reviewed. Finally, conclusions and prospects have been elaborated.

Electrochemical CO2 reduction toward multicarbon alcohols - The microscopic world of catalysts & process conditions

Tackling climate change is one of the undoubtedly most important challenges at the present time. This review deals mainly with the chemical aspects of the current status for converting the greenhouse gas CO2 via electrochemical CO2 reduction reaction (CO2RR) to multicarbon alcohols as valuable products. Feasible reaction routes are presented, as well as catalyst synthesis methods such as electrodeposition, precipitation, or sputtering. In addition, a comprehensive overview of the currently achievable selectivities for multicarbon alcohols in CO2RR is given. It is also outlined to what extent, for example, modifications of the catalyst surfaces or the use of bifunctional compounds the product distribution is shifted. In addition, the influence of varying electrolyte, temperature, and pressure is described and discussed.

Electric-Field-Induced Solid-Gas Interfacial Chemical Reaction in Carbon Nanotube Ensembles: Route toward Ultra-sensitive Gas Detectors

The electric field at the sharp pointed tips of single wall carbon nanotube ensembles has been utilized to kinetically accelerate hitherto unobserved chemical reactions at the heterogeneous solid-gas interfaces. The principle of ″action-of-points″ drives specific chemical reactions between the defect sites of single wall carbon nanotubes (CNTs) and ppb levels of gaseous hydrogen sulfide. This is manifested as changes in the electrical conductivity of the conductive CNT-ensemble (cCNT) and visually tracked as enthalpic modulations at the site of the reaction through infrared thermometry. Importantly, the principle has been observed for a variety of analytes such as NH₃, H₂O, and H₂S, leading to distinctly correlatable changes in reactivity and conductivity changes. Theoretical calculations based on the density functional theory in the presence and absence of applied electric field reveal that the applied electric field activates the H₂S gas molecules by charge polarization, yielding favorable energetics. These results imply the possibility of carrying out site-specific chemical modifications for nanomaterials and also provide transformative opportunities for the development of miniaturized e-nose-based gas analyzers.

Boosting Mass Exchange between Pd/NC and MoC/NC Dual Junctions via Electron Exchange for Cascade CO2 Fixation

Merging existing catalysts together as a cascade catalyst may achieve "one-pot" synthesis of complex but functional molecules by simplifying multistep reactions, which is the blueprint of sustainable chemistry with low pollutant emission and consumption of energy and materials only when the smooth mass exchange between different catalysts is ensured. Effective strategies to facilitate the mass exchange between different active centers, which may dominate the final activity of various cascade catalysts, have not been reached until now, even though charged interfaces due to work function driven electron exchange have been widely observed. Here, we successfully constructed mass (reactants and intermediates) exchange paths between Pd/N-doped carbon and MoC/N-doped carbon induced by interfacial electron exchange to trigger the mild and cascade methylation of amines using CO₂ and H₂. Theoretical and experimental results have demonstrated that the mass exchange between electron-rich MoC and electron-deficient Pd could prominently improve the production of N,N-dimethyl tertiary amine, which results in a remarkably high turnover frequency value under mild conditions, outperforming the state-of-the-art catalysts in the literature by a factor of 5.9.

Dual-Atom Metal and Nonmetal Site Catalyst on a Single Nickel Atom Supported on a Hybridized BCN Nanosheet for Electrochemical CO2 Reduction to Methane: Combining High Activity and Selectivity

Atomically dispersed nitrogen-coordinated transition-metal sites supported on graphene (TM-N₄-C) offer promising potential for the electrochemical carbon dioxide reduction reaction (CO₂RR). However, a few TM-N_x-C single-atom catalysts (SAC) are capable of reducing CO₂ to multielectron products with high activity and selectivity. Herein, using density functional theory calculations, we investigated the electrocatalytic performance of a single TM atom embedded into a defective BCN nanosheet for CO₂RR. The N and B atom co-coordinated TM center, namely, TM-B₂N₂, constructs a symmetry-breaking site, which strengthens the overlapping of atomic orbitals, and enables the linear CO₂ to be curved and activated, compared to the weak coupling of CO₂ with the symmetric TM-N₄ site. Moreover, the TM-B₂N₂ sites play a role of dual-atom active sites, in which the TM atom serves as the carbon adsorption site and the B atom acts as the oxygen adsorption site, largely stabilizing the key intermediates, especially *COOH. The symmetry-breaking coordination structures shift the d-band center of the TM atom toward the Fermi level and thus facilitate CO₂ reduction to hydrocarbons and oxygenates. As a result, different from the TM-N₄-C structure that leads to CO as the major product, the Ni atom supported on BCN can selectively catalyze CO₂ conversion into CH₄, with an ultralow limiting potential of -0.07 V, while suppressing the hydrogen evolution reaction. Our finding suggests that introduction of a nonmetal active site adjacent to the metal site provides a new avenue for achieving efficient multi-intermediate electrocatalytic reactions.