Stable and Highly Efficient Hydrogen Evolution from Seawater Enabled by an Unsaturated Nickel Surface Nitride

Ru-regulated electronic structure CoNi-MOF nanosheets advance water electrolysis kinetics in alkaline and seawater media

Herein, an ion-exchange strategy is utilized to greatly improve the kinetics of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) by Ru-modified CoNi- 1,3,5-Benzenetricarboxylic acid (BTC)-metal organic framework nanosheets (Ru@CoNi-MOF). Due to the higher Ni active sites and lower electron transfer impedance, Ru@CoNi-MOF catalyst requires the overpotential as low as 47 and 279 mV, at a current density of 10 mA/cm2 toward HER and OER, respectively. Significantly, the mass activity of Ru@CoNi-MOF for HER and OER are 25.9 and 10.6 mA mg-1, nearly 15.2 and 8.8 times higher than that of Ni-MOF. In addition, the electrolyzer of Ru@CoNi-MOF demonstrates exceptional electrolytic performance in both KOH and seawater environment, surpasses the commercial Pt/C||IrO2 couple. Theoretical calculations prove that introducing Ru atoms in - CoNi-MOF modulates the electronic structure of Ni, optimizes adsorption energy for H* and reduces energy barrier of metal organic frameworks (MOFs). This modification significantly improves the kinetic rate of the Ru@CoNi-MOF during water splitting. Certainly, this study highlights the utilization of MOF nanosheets as advanced HER/OER electrocatalysts with immense potential, and will paves a way to develop more efficient MOFs for catalytic applications.

Seawater electrolysis for fuels and chemicals production: fundamentals, achievements, and perspectives

Seawater electrolysis for the production of fuels and chemicals involved in onshore and offshore plants powered by renewable energies offers a promising avenue and unique advantages for energy and environmental sustainability. Nevertheless, seawater electrolysis presents long-term challenges and issues, such as complex composition, potential side reactions, deposition of and poisoning by microorganisms and metal ions, as well as corrosion, thus hindering the rapid development of seawater electrolysis technology. This review focuses on the production of value-added fuels (hydrogen and beyond) and fine chemicals through seawater electrolysis, as a promising step towards sustainable energy development and carbon neutrality. The principle of seawater electrolysis and related challenges are first introduced, and the redox reaction mechanisms of fuels and chemicals are summarized. Strategies for operating anodes and cathodes including the development and application of chloride- and impurity-resistant electrocatalysts/membranes are reviewed. We comprehensively summarize the production of fuels and chemicals (hydrogen, carbon monoxide, sulfur, ammonia, etc.) at the cathode and anode via seawater electrolysis, and propose other potential strategies for co-producing fine chemicals, even sophisticated and electronic chemicals. Seawater electrolysis can drive the oxidation and upgrading of industrial pollutants or natural organics into value-added chemicals or degrade them into harmless substances, which would be meaningful for environmental protection. Finally, the perspective and prospects are outlined to address the challenges and expand the application of seawater electrolysis.

Phase Engineering and Dispersion Stabilization of Cobalt toward Enhanced Hydrogen Evolution

Phase engineering is promising to increase the intrinsic activity of the catalyst toward hydrogen evolution reaction (HER). However, the polymorphism interface is unstable due to the presence of metastable phases. Herein, phase engineering and dispersion stabilization are applied simultaneously to boost the HER activity of cobalt without sacrificing the stability. A fast and facile approach (plasma cathodic electro deposition) is developed to prepare cobalt film with a hetero-phase structure. The polymorphs of cobalt are realized through reduced stacking fault energy due to the doping of Mo, and the high temperature treatment resulted from the plasma discharge. Meanwhile, homogeneously dispersed oxide/carbide nanoparticles are produced from the reaction of plasma-induced oxygen/carbon atoms with electro-deposited metal. The existence of rich polymorphism interface and oxide/carbide help to facilitate H2 production by the tuning of electronic structure and the increase of active sites. Furthermore, oxide/carbide dispersoid effectively prevents the phase transition through a pinning effect on the grain boundary. As-prepared Co-hybrid/CoO_MoC exhibits both high HER activity and robust stability (44 mV at 10 mA cm-2, Tafel slope of 53.2 mV dec-1, no degradation after 100 h test). The work reported here provides an alternate approach to the design of advanced HER catalysts for real application.

High-Throughput Designed and Laser-Etched NiFeCrVTi High-Entropy Alloys with High Catalytic Activities and Corrosion Resistance for Hydrogen Evolution in Seawater

Electrocatalytic hydrogen evolution from seawater through wind or solar energy is a cost-effective way to produce green hydrogen fuel. However, the lack of highly active and anti-corrosive electrocatalysts in seawater severely hinders the industrial application. Herein, a novel Ni1.1FeCr0.4V0.3Ti0.3 high-entropy alloy (HEA) is designed through high throughput computing and prepared via powder metallurgy with the surface treated by laser etching under different laser power. The laser-etched NiFeCrVTi high-entropy alloys exhibit a unique periodically ordered structure with multiple active centers and high porosity. The Ni-HEA-30 displays remarkable hydrogen evolution reaction (HER) performance with an overpotential of 55.9 mV and a Tafel slope of 47.3 mV dec-1 in seawater. Density functional theory (DFT) calculations are applied to identify the real active sites for HER on the HEA surface as the key factor for both proton and intermediate transformation, which also reveals that the Cr atom promotes the adsorption energy of water molecules, and the modulation of the electronic structure plays a crucial role in optimizing the hydrogen binding capabilities of the Ni atoms within the alloy. Additionally, the electrocatalyst displays high corrosion resistance in seawater, contributing to the good durability for hydrogen production. This work uncovers a new paradigm to develop novel electrocatalysts with superior reaction activity in seawater.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Concurrent Mechanisms of Hot Electrons and Interfacial Water Molecule Ordering in Plasmon-Enhanced Nitrogen Fixation

The participation of high-energy hot electrons generated from the non-radiative decay of localized surface plasmons is an important mechanism for promoting catalytic processes. Herein, another vital mechanism associated with the localized surface plasmon resonance (LSPR) effect, significantly contributing to the nitrogen reduction reaction (NRR), is found. That is to say, the LSPR-induced strong localized electric fields can weaken the intermolecular hydrogen bonds and regulate the arrangement of water molecules at the solid-liquid interface. The AuCu pentacle nanoparticles with excellent light absorption ability and the capability to generate strong localized electric fields are chosen to demonstrate this effect. The in situ Raman spectra and theoretical calculations are employed to verify the mechanism at the molecular scale in a nitrogen fixation process. Meanwhile, due to the promoted electron transfer at the interface by the well-ordered interfacial water, as well as the participation of high-energy hot electrons, the optimal catalyst exhibits excellent performance with an NH3 yield of 52.09 µg h-1 cm-2 and Faradaic efficiency (FE) of 45.82% at ─0.20 V versus RHE. The results are significant for understanding the LSPR effect in catalysis and provide a new approach for regulating the reaction process.

Direct Seawater Electrolysis: From Catalyst Design to Device Applications

Direct seawater electrolysis (DSE) for hydrogen production, using earth-abundant seawater as the feedstock and renewable electricity as the driving source, paves a new opportunity for flexible energy conversion/storage and smooths the volatility of renewable energy. Unfortunately, the complex environments of seawater impose significant challenges on the design of DSE catalysts, and the practical performance of many current DSE catalysts remains unsatisfactory on the device level. However, many studies predominantly concentrate on the development of electrocatalysts for DSE without giving due consideration to the specific devices. To mitigate this gap, the most recent progress (mainly published within the year 2020-2023) of DSE electrocatalysts and devices are systematically evaluated. By discussing key bottlenecks, corresponding mitigation strategies, and various device designs and applications, the tremendous challenges in addressing the trade-off among activity, stability, and selectivity for DSE electrocatalysts by a single shot are emphasized. In addition, the rational design of the DSE electrocatalysts needs to align with the specific device configuration, which is more effective than attempting to comprehensively enhance all catalytic parameters. This work, featuring the first review of this kind to consider rational catalyst design in the framework of DSE devices, will facilitate practical DSE development.

Electron Redistribution of Ru Site on MoO2@NiMoO4 Support for Efficient Ampere-Level Current Density Electrolysis of Alkaline Seawater

Seawater electrolysis is a promising but challenging strategy to generate carbon-neutral hydrogen. A grand challenge for hydrogen evolution reaction (HER) from alkaline seawater electrolysis is the development of efficient and stable electrocatalysts to overcome the limitation of sluggish kinetics. Here, a 3D nanorod hybrid catalyst is reported, which comprises heterostructure MoO2@NiMoO4 supported Ru nanoparticles (Ru/ MoO2@NiMoO4) with a size of ≈5 nm. Benefitting from the effect of strongly coupled interaction, Ru/MoO2@NiMoO4 catalyst exhibits a remarkable alkaline seawater hydrogen evolution performance, featured by a low overpotential of 184 mV at a current density of 1.0 A cm-2, superior to commercial Pt/C (338 mV). Experimental observations demonstrate that the heterostructure MoO2@NiMoO4 as an electron-accepting support makes the electron transfer from the Ru nanoparticles to MoO2, and thereby implements the electron redistribution of Ru site. Mechanistic analysis elucidates that the electron redistribution of active Ru site enhances the ability of hydrogen desorption, thereby promoting alkaline seawater HER kinetics and finally leading to a satisfactory catalysis performance at ampere-level current density of alkaline seawater electrolysis.

Constructing Heterogeneous Interface by Growth of Carbon Nanotubes on the Surface of MoB2 for Boosting Hydrogen Evolution Reaction in a Wide pH Range

Transition metal diborides represented by MoB2 have attracted widespread attention for their excellent acidic hydrogen evolution reaction (HER). Nevertheless, their electrocatalytic performance is generally unsatisfactory in high-pH electrolytes. Heterogeneous interface engineering is one of the most promising methods for optimizing the composition and structure of electrocatalysts, thereby greatly affecting their electrochemical performance. Herein, a heterostructure, composed of MoB2 and carbon nanotubes (CNTs), is rationally constructed by boronizing precursors including (NH4 )4 [NiH6 Mo6 O24 ]·5H2 O (NiMo6 ) and Co complexes on the carbon cloth (Co,Ni-MoB2 @CNT/CC). In this method, NiMo6 is boronized to form MoB2 by a modified molten-salt-assisted borothermal reduction. Meanwhile, Co catalyzes extra carbon sources to grow CNTs on the surface of MoB2 . Thanks to the successful production of the heterostructure, Co,Ni-MoB2 @CNT/CC exhibits remarkable HER performance with a low overpotential of 98.6, 113.0, and 73.9 mV at 10 mA cm-2 in acidic, neutral, and alkaline electrolytes, respectively. Notably, even at 500 mA cm-2 , the electrochemical activity of Co,Ni-MoB2 @CNT/CC exceeds that of Pt/C/CC in an alkaline solution and maintains over 50 h. Theoretical calculations reveal that the construction of the heterostructure is beneficial to both water dissociation and reactive intermediate adsorption, resulting in superior alkaline HER performance.

Enhanced Alkaline Hydrogen Evolution Reaction through Lanthanide-Modified Rhodium Intermetallic Catalysts

Design of highly efficient electrocatalysts for alkaline hydrogen evolution reaction (HER) is of paramount importance for water electrolysis, but still a considerable challenge because of the slow HER kinetics in alkaline environments. Alloying is recognized as an effective strategy to enhance the catalytic properties. Lanthanides (Ln) are recognized as an electronic and structural regulator, attributed to their unique 4f electron behavior and the phenomenon known as lanthanide contraction. Here, a new class of Rh3Ln intermetallics (IMs) are synthesized using the sodium vapor reduction method. The alloying process induced an upshift of the d-band center and electron transfer from Ln to Rh, resulting in optimized adsorption and dissociation energies for H2O molecules. Consequently, Rh3Tb IMs exhibited outstanding HER activity in both alkaline environments and seawater, displaying an overpotential of only 19 mV at 10 mA cm-2 and a Tafel slope of 22.2 mV dec-1. Remarkably, the current density of Rh3Tb IMs at 100 mV overpotential is 8.6 and 5.7 times higher than that of Rh/C and commercial Pt/C, respectively. This work introduces a novel approach to the rational design of HER electrocatalysis and sheds light on the role of lanthanides in electrocatalyst systems.

Bi-cation incorporated Ni3N nanosheets boost water dissociation kinetics for enhanced alkaline hydrogen evolution activity

Nickel nitride (Ni3N) is a promising electrocatalyst for the hydrogen evolution reaction (HER) owing to its excellent metallic features and has been demonstrated to exhibit considerable activity for water oxidation. However, its undesirable characteristics as an HER electrocatalyst due to its poor unfavourable d-band energy level significantly limit its water dissociation kinetics. Herein, the HER electrocatalytic activity of Ni3N was prominently enhanced via the simultaneous incorporation of bi-cations (vanadium (V) and iron (Fe), denoted as V-Fe-Ni3N). The optimized V-Fe-Ni3N displays impressive performance with an overpotential of 69 mV at 10 mA cm-2 and good stability in 1.0 M KOH, which is remarkably better than pristine Ni3N, V-doped Ni3N, and Fe-doped Ni3N and considerably closer to a commercial Pt/C catalyst. Based on density functional theory (DFT) studies, V and Fe atoms not only serve as active sites for promoting water dissociation kinetics but also tune the electronic structure of Ni3N to achieve optimized hydrogen adsorption capabilities. This work presents an inclusive understanding of the rational designing of high-performance transition metal nitride-based electrocatalysts for hydrogen production. Its electrocatalytic performance can be significantly enhanced by doping transition metal cations.

Manipulating the Microenvironment of Single Atoms by Switching Support Crystallinity for Industrial Hydrogen Evolution

Modulating the microenvironment of single-atom catalysts (SACs) is critical to optimizing catalytic activity. Herein, we innovatively propose a strategy to improve the local reaction environment of Ru single atoms by precisely switching the crystallinity of the support from high crystalline and low crystalline, which significantly improves the hydrogen evolution reaction (HER) activity. The Ru single-atom catalyst anchored on low-crystalline nickel hydroxide (Ru-LC-Ni(OH)2 ) reconstructs the distribution balance of the interfacial ions due to the activation effect of metal dangling bonds on the support. Single-site Ru with a low oxidation state induces the aggregation of hydronium ions (H3 O+ ), leading to the formation of a local acidic microenvironment in alkaline media, breaking the pH-dependent HER activity. As a comparison, the Ru single-atom catalyst anchored on high-crystalline nickel hydroxide (Ru-HC-Ni(OH)2 ) exhibits a sluggish Volmer step and a conventional local reaction environment. As expected, Ru-LC-Ni(OH)2 requires low overpotentials of 9 and 136 mV at 10 and 1000 mA cm-2 in alkaline conditions and operates stably at 500 mA cm-2 for 500 h in an alkaline seawater anion exchange membrane (AEM) electrolyzer. This study provides a new perspective for constructing highly active single-atom electrocatalysts.

Bifunctional Amorphous Transition-Metal Phospho-Boride Electrocatalysts for Selective Alkaline Seawater Splitting at a Current Density of 2A cm-2

Hydrogen production by direct seawater electrolysis is an alternative technology to conventional freshwater electrolysis, mainly owing to the vast abundance of seawater reserves on earth. However, the lack of robust, active, and selective electrocatalysts that can withstand the harsh and corrosive saline conditions of seawater greatly hinders its industrial viability. Herein, a series of amorphous transition-metal phospho-borides, namely Co-P-B, Ni-P-B, and Fe-P-B are prepared by simple chemical reduction method and screened for overall alkaline seawater electrolysis. Co-P-B is found to be the best of the lot, requiring low overpotentials of ≈270 mV for hydrogen evolution reaction (HER), ≈410 mV for oxygen evolution reaction (OER), and an overall voltage of 2.50 V to reach a current density of 2 A cm-2 in highly alkaline natural seawater. Furthermore, the optimized electrocatalyst shows formidable stability after 10,000 cycles and 30 h of chronoamperometric measurements in alkaline natural seawater without any chlorine evolution, even at higher current densities. A detailed understanding of not only HER and OER but also chlorine evolution reaction (ClER) on the Co-P-B surface is obtained by computational analysis, which also sheds light on the selectivity and stability of the catalyst at high current densities.

The Recent Progresses of Electrodes and Electrolysers for Seawater Electrolysis

The utilization of renewable energy for hydrogen production presents a promising pathway towards achieving carbon neutrality in energy consumption. Water electrolysis, utilizing pure water, has proven to be a robust technology for clean hydrogen production. Recently, seawater electrolysis has emerged as an attractive alternative due to the limitations of deep-sea regions imposed by the transmission capacity of long-distance undersea cables. However, seawater electrolysis faces several challenges, including the slow kinetics of the oxygen evolution reaction (OER), the competing chlorine evolution reaction (CER) processes, electrode degradation caused by chloride ions, and the formation of precipitates on the cathode. The electrode and catalyst materials are corroded by the Cl- under long-term operations. Numerous efforts have been made to address these issues arising from impurities in the seawater. This review focuses on recent progress in developing high-performance electrodes and electrolyser designs for efficient seawater electrolysis. Its aim is to provide a systematic and insightful introduction and discussion on seawater electrolysers and electrodes with the hope of promoting the utilization of offshore renewable energy sources through seawater electrolysis.

Fabrication of a hierarchical NiTe@NiFe-LDH core-shell array for high-efficiency alkaline seawater oxidation

Herein, a hierarchical NiTe@NiFe-LDH core-shell array on Ni foam (NiTe@NiFe-LDH/NF) demonstrates its effectiveness for oxygen evolution reaction (OER) in alkaline seawater electrolyte. This NiTe@NiFe-LDH/NF array showcases remarkably low overpotentials of 277 mV and 359 mV for achieving current densities of 100 and 500 mA cm-2, respectively. Also, it shows a low Tafel slope of 68.66 mV dec-1. Notably, the electrocatalyst maintains robust stability over continuous electrolysis for at least 50 h at 100 mA cm-2. The remarkable performance and hierarchical structure advantages of NiTe@NiFe-LDH/NF offer innovative insights for designing efficient seawater oxidation electrocatalysts.

Precisely Control Relationship between Sulfur Vacancy and H Absorption for Boosting Hydrogen Evolution Reaction

Effective and robust catalyst is the core of water splitting to produce hydrogen. Here, we report an anionic etching method to tailor the sulfur vacancy (VS) of NiS2 to further enhance the electrocatalytic performance for hydrogen evolution reaction (HER). With the VS concentration change from 2.4% to 8.5%, the H* adsorption strength on S sites changed and NiS2-VS 5.9% shows the most optimized H* adsorption for HER with an ultralow onset potential (68 mV) and has long-term stability for 100 h in 1 M KOH media. In situ attenuated-total-reflection Fourier transform infrared spectroscopy (ATR-FTIRS) measurements are usually used to monitor the adsorption of intermediates. The S- H* peak of the NiS2-VS 5.9% appears at a very low voltage, which is favorable for the HER in alkaline media. Density functional theory calculations also demonstrate the NiS2-VS 5.9% has the optimal |ΔGH*| of 0.17 eV. This work offers a simple and promising pathway to enhance catalytic activity via precise vacancies strategy.

Metal nitrides for seawater electrolysis

Electrocatalytic high-throughput seawater electrolysis for hydrogen production is a promising green energy technology that offers possibilities for environmental and energy sustainability. However, large-scale application is limited by the complex composition of seawater, high concentration of Cl- leading to competing reaction, and severe corrosion of electrode materials. In recent years, extensive research has been conducted to address these challenges. Metal nitrides (MNs) with excellent chemical stability and catalytic properties have emerged as ideal electrocatalyst candidates. This review presents the electrode reactions and basic parameters of the seawater splitting process, and summarizes the types and selection principles of conductive substrates with critical analysis of the design principles for seawater electrocatalysts. The focus is on discussing the properties, synthesis, and design strategies of MN-based electrocatalysts. Finally, we provide an outlook for the future development of MNs in the high-throughput seawater electrolysis field and highlight key issues that require further research and optimization.

Recent Advancements in Electrochemical Hydrogen Production via Hybrid Water Splitting

As one of the most promising approaches to producing high-purity hydrogen (H2 ), electrochemical water splitting powered by the renewable energy sources such as solar, wind, and hydroelectric power has attracted considerable interest over the past decade. However, the water electrolysis process is seriously hampered by the sluggish electrode reaction kinetics, especially the four-electron oxygen evolution reaction at the anode side, which induces a high reaction overpotential. Currently, the emerging hybrid electrochemical water splitting strategy is proposed by integrating thermodynamically favorable electro-oxidation reactions with hydrogen evolution reaction at the cathode, providing a new opportunity for energy-efficient H2 production. To achieve highly efficient and cost-effective hybrid water splitting toward large-scale practical H2 production, much work has been continuously done to exploit the alternative anodic oxidation reactions and cutting-edge electrocatalysts. This review will focus on recent developments on electrochemical H2 production coupled with alternative oxidation reactions, including the choice of anodic substrates, the investigation on electrocatalytic materials, and the deep understanding of the underlying reaction mechanisms. Finally, some insights into the scientific challenges now standing in the way of future advancement of the hybrid water electrolysis technique are shared, in the hope of inspiring further innovative efforts in this rapidly growing field.

NiM (Sb, Sn)/N-doped hollow carbon tube as high-rate and high-capacity anode for lithium-ion batteries

Alloy-type materials are regarded as prospective anode replacements for lithium-ion batteries (LIBs) owing to their attractive theoretical capacity. However, the drastic volume expansion leads to structural collapse and pulverization, resulting in rapid capacity decay during cycling. Here, a simple and scalable approach to prepare NiM (M: Sb, Sn)/nitrogen-doped hollow carbon tubes (NiMC) via template and substitution reactions is proposed. The nanosized NiM particles are uniformly anchored in the robust hollow N-doped carbon tubes via NiNC coordination bonds, which not only provides a buffer for volume expansion but also avoids agglomerating of the reactive material and ensures the integrity of the conductive network and structural framework during lithiation/delithiation. As a result, NiSbC and NiSnC exhibit high reversible capacities (1259 and 1342 mAh/g after 100 cycles at 0.1 A/g) and fascinating rate performance (627 and 721 mAh/g at 2 A/g), respectively, when employed as anodes of LIBs. The electrochemical kinetic analysis reveals that the dominant lithium storage behavior of NiMC electrodes varies from capacitive contribution to diffusion contribution during the cycling corresponding to the activation of the electrode exposing more NiM sites. Meanwhile, M (Sb, Sn) is gradually transformed into stable NiM during the de-lithium process, making the NiMC structure more stable and reversible in the electrochemical reaction. This work brings a novel thought to construct high-performance alloy-based anode materials.

Recent Advances in Hybrid Seawater Electrolysis for Hydrogen Production

Seawater electrolysis (SWE) is a promising and potentially cost-effective approach to hydrogen production, considering that seawater is vastly abundant and SWE is able to combine with offshore renewables producing green hydrogen. However, SWE has long been suffering from technical challenges including the high energy demand and interference of chlorine chemistry, leading electrolyzers to a low efficiency and short lifespan. In this context, hybrid SWE, operated by replacing the energy-demanding oxygen evolution reaction and interfering chlorine evolution reaction (CER) with a thermodynamically more favorable anodic oxidation reaction (AOR) or by designing innovative electrolyzer cells, has recently emerged as a better alternative, which not only allows SWE to occur in a safe and energy-saving manner without the notorious CER, but also enables co-production of value-added chemicals or elimination of environmental pollutants. This review provides a first account of recent advances in hybrid SWE for hydrogen production. The substitutional AOR of various small molecules or redox mediators, in couple with hydrogen evolution from seawater, is comprehensively summarized. Moreover, how the electrolyzer cell design helps in hybrid SWE is briefly discussed. Last, the current challenges and future outlook about the development of the hybrid SWE technology are outlined.

Constructing of CoP-Nb2O5 p-n heterojunction with built-in electric field to accelerate the charge migration in electrocatalytic hydrogen evolution

Studying interfacial charge transfer is of great significance for the preparation of electrocatalysts with high activity for the hydrogen evolution reaction (HER). Particularly, exploring the in-depth catalytic mechanisms and facile fabrication methods of narrow bandgap metal phosphides remains worthwhile. This work successfully combined catalytically inert n-type Nb2O5 with p-type CoP to prepare a p-n heterojunction (CoP-Nb2O5). The self-supporting heterojunction was fabricated by gas-phase phosphorization of the Co(OH)2-Nb2O5 precursor obtained through hydrothermal-electrodeposition strategy. By analyzing the electronic and band structures of CoP and Nb2O5, it was found that there exists a built-in electric field (BEF) in the heterojunction. This BEF can modulate the electronic structure of CoP at the interface, enhance its intrinsic activity and accelerate charge migration. The subsequent experimental results also demonstrate that Nb2O5 can significantly enhance the activity and stability of CoP. Our findings can serve as a novel perspective on the application of p-n heterojunction in the field of energy storage and conversion.

Materials Design and System Innovation for Direct and Indirect Seawater Electrolysis

Green hydrogen production from renewably powered water electrolysis is considered as an ideal approach to decarbonizing the energy and industry sectors. Given the high-cost supply of ultra-high-purity water, as well as the mismatched distribution of water sources and renewable energies, combining seawater electrolysis with coastal solar/offshore wind power is attracting increasing interest for large-scale green hydrogen production. However, various impurities in seawater lead to corrosive and toxic halides, hydroxide precipitation, and physical blocking, which will significantly degrade catalysts, electrodes, and membranes, thus shortening the stable service life of electrolyzers. To accelerate the development of seawater electrolysis, it is crucial to widen the working potential gap between oxygen evolution and chlorine evolution reactions and develop flexible and highly efficient seawater purification technologies. In this review, we comprehensively discuss present challenges, research efforts, and design principles for direct/indirect seawater electrolysis from the aspects of materials engineering and system innovation. Further opportunities in developing efficient and stable catalysts, advanced membranes, and integrated electrolyzers are highlighted for green hydrogen production from both seawater and low-grade water sources.

Corrosion-resistant cobalt phosphide electrocatalysts for salinity tolerance hydrogen evolution

Seawater electrolysis is a viable method for producing hydrogen on a large scale and low-cost. However, the catalyst activity during the seawater splitting process will dramatically degrade as salt concentrations increasing. Herein, CoP is discovered that could reject chloride ions far from catalyst in electrolyte based on molecular dynamic simulation. Thus, a binder-free electrode is designed and constructed by in-situ growth of homogeneous CoP on rGO nanosheets wrapped around the surface of Ti fiber felt for seawater splitting. As expected, the as-obtained CoP/rGO@Ti electrode exhibits good catalytic activity and stability in alkaline electrolyte. Especially, benefitting from the highly effective repulsive Cl- intrinsic characteristic of CoP, the catalyst maintains good catalytic performance with saturated salt concentration, and the overpotential increasing is less than 28 mV at 10 mA cm-2 from 0 M to saturated NaCl in electrolyte. Furthermore, the catalyst for seawater splitting performs superior corrosion-resistance with a low solubility of 0.04%. This work sheds fresh light into the development of efficient HER catalysts for salinity tolerance hydrogen evolution.

One-step electrodeposition of V-doped NiFe nanosheets for low-overpotential alkaline oxygen evolution

As a non-noble metal electrocatalyst for the oxygen evolution reaction (OER), the binary NiFe layer double hydroxide (LDH) is expected to replace Ru-based and Ir-based anode materials for water decomposition. To attain threshold current density, nevertheless, a somewhat significant overpotential is still needed. In this work, layered double hydroxides of NiFe LDH are doped with V to form the terpolymer NiFeV LDH, which greatly increases the intrinsic activity of NiFe LDH and improves OER performance. This process is a straightforward and quick one-step electrodeposition process. Notably, NiFeV/NF has a low overpotential (218 mV at 10 mA cm-2) and faster kinetics (Tafel slope of 31 mV dec-1) as well as excellent durability and stability in 1 M KOH solution. In addition, the OER performance of the catalyst prepared in this work is better than that of a non-valuable metal catalyst that was recently reported. The V-doped NiFe LDH layered double hydroxides and the investigation of electrodeposition electrocatalytic methods in this work offer a fresh opportunity for the advancement of electrochemical technology.

Dual-Ligand Strategy to Construct Metal Organic Gel Catalyst with the Optimized Electronic Structure for High-Efficiency Overall Water Splitting and Flexible Metal-Air Battery

Non-noble metal catalysts are known for their efficient catalytic performance for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). Metal organic gels (MOGs) can be considered as a promising electrocatalyst owing to the diverse physicochemical properties but usually suffer from its poor electrical conductivity and catalytic stability. Here, a FeCo-MOG is constructed with considerable trifunctional activity. The optimal P-CoFe-H3 prepared by using phytic acid (PA) and 2,4,6-Tris[(p-carboxyphenyl)amino]-1,3,5-triazine benzoic acid (H3 TATAB) as dual ligands), exhibits outstanding ORR, OER, and HER activities as well as stability, exceeding most of state-of-the-art catalysts. As expected, the flexible Zn-air battery applied with P-CoFe-H3 as air cathode displays considerable power density, discharge voltage plateau, and cycling stability. Impressively, it is also capable of driving the overall water-splitting device by applying the P-CoFe-H3 as anode and cathode. Furthermore, theoretical calculations reveal that dual ligands can optimize the coordination environment and charge density of active sites, thereby reducing the absorption energy of intermediate species and boosting the catalytic performance. This work endows the dual-ligands coordination strategy with great potentiality for MOGs-based electrocatalysts in energy conversion devices.

Construction of Ni4Mo/MoO2 heterostructure on oxygen vacancy enriched NiMoO4 nanorods as an efficient bifunctional electrocatalyst for overall water splitting

Despite great efforts over the past decade, rational design of bifunctional electrocatalysts with low cost and high efficiency still remains a challenge to achieve industrial water splitting. Herein, we synthesized the nickel-molybdenum nanorod array catalyst supported on NF (NMO@NM/MO) by a two-step process of hydrothermal and reductive annealing. Partial reduction of the NiMoO4 induces the structural reconstruction and formation of the Ni4Mo/MoO2 heterostructure on oxygen vacancy enriched nanorod, which bring out sufficient active sites, large specific surface area and favorable interfacial charge transfer. Thanks to the unique core-shell structure with the heterostructured Ni4Mo/MoO2 surface and defect-rich NiMoO4 core, the obtained electrocatalyst shows greatly improved hydrogen evolution reaction (HER) activity with an ultralow overpotential of 63 mV at 100 mA cm-2 (vs. 314 mV for the NiMoO4). Density function theory calculations reveal that the construction of the Ni4Mo/MoO2 heterostructure effectively accelerates H2O dissociation kinetics, while the defective NiMoO4 facilitates H* adsorption/desorption. Moreover, the heterostructure catalyst also displays excellent oxygen evolution reaction (OER) performance with the low overpotential of 274 mV at 100 mA cm-2. When coupling HER and OER by using NMO@NM/MO as both the cathode and anode, the alkaline electrolyzer delivers a current density of 10 mA cm-2 at only 1.50 V as well as good robustness. The synergistic effect of the hetero-interface and the defect engineering endows the electrocatalyst with excellent bifunctional catalytic activity for HER and OER. This work may provide a route for rational design of heterostructure electrocatalysts with multiple active components.

High-Performance Alkaline Seawater Electrolysis with Anomalous Chloride Promoted Oxygen Evolution Reaction

A highly selective and durable oxygen evolution reaction (OER) electrocatalyst is the bottleneck for direct seawater splitting because of side reactions primarily caused by chloride ions (Cl- ). Most studies about OER catalysts in seawater focus on the repulsion of the Cl- to reduce its negative effects. Herein, we demonstrate that the absorption of Cl- on the specific site of a popular OER electrocatalyst, nickel-iron layered double hydroxide (NiFe LDH), does not have a significant negative impact; rather, it is beneficial for its activity and stability enhancement in natural seawater. A set of in situ characterization techniques reveals that the adsorption of Cl- on the desired Fe site suppresses Fe leaching, and creates more OER-active Ni sites, improving the catalyst's long-term stability and activity simultaneously. Therefore, we achieve direct alkaline seawater electrolysis for the very first time on a commercial-scale alkaline electrolyser (AE, 120 cm2 electrode area) using the NiFe LDH anode. The new alkaline seawater electrolyser exhibits a reduction in electricity consumption by 20.7 % compared to the alkaline purified water-based AE using commercial Ni catalyst, achieving excellent durability for 100 h at 200 mA cm-2 .

Metastable Hexagonal-Phase Nickel with Ultralow Pt Content for an Efficient Alkaline/Seawater Hydrogen Evolution Reaction

Hydrogen has been hailed as the core of the world's future energy architecture. It is imperative to develop catalysts with an efficient and sustained hydrogen evolution reaction (HER) to scale up alkaline/seawater electrolysis, yet significant difficulties and challenges, such as the high usage of precious metals, still remain. In this paper, a metastable-phase hexagonal close-packed (hcp) Ni-based catalyst with ultralow Pt content (3.1 at %) was designed, which has excellent catalytic performance in the alkaline/seawater HER. The optimal catalyst offers low overpotentials of 21 and 137 mV at 10 mA cm-2 and remains stable during operation for 100 and 300 h at this current density in 1.0 M KOH and real seawater, respectively. A mechanistic study shows that the metastable-phase Ni acts as an anchor site for OH-, which promotes the dissociation of water and greatly improves the formation rate of H2.

Emerging materials and technologies for electrocatalytic seawater splitting

The limited availability of freshwater in renewable energy-rich areas has led to the exploration of seawater electrolysis for green hydrogen production. However, the complex composition of seawater presents substantial challenges such as electrode corrosion and electrolyzer failure, calling into question the technological and economic feasibility of direct seawater splitting. Despite many efforts, a comprehensive overview and analysis of seawater electrolysis, including electrochemical fundamentals, materials, and technologies of recent breakthroughs, is still lacking. In this review, we systematically examine recent advances in electrocatalytic seawater splitting and critically evaluate the obstacles to optimizing water supply, materials, and devices for stable hydrogen production from seawater. We demonstrate that robust materials and innovative technologies, especially selective catalysts and high-performance devices, are critical for efficient seawater electrolysis. We then outline and discuss future directions that could advance the techno-economic feasibility of this emerging field, providing a roadmap toward the design and commercialization of materials that can enable efficient, cost-effective, and sustainable seawater electrolysis.

Ferricyanide Armed Anodes Enable Stable Water Oxidation in Saturated Saline Water at 2 A/cm2

The direct seawater electrolysis at high current density and low overpotential affords an effective strategy toward clean and renewable hydrogen fuel production. However, the severe corrosion of anode as a result of the saturation of Cl- upon continuous seawater feeding seriously hamper the electrolytic process. Herein, cobalt ferricyanide / cobalt phosphide (CoFePBA/Co2 P) anodes with Cap/Pin structure are synthesized, which stably catalyze alkaline saturated saline water oxidation at 200-2000 mA cm-2 over hundreds of hours without corrosion. Together with the experimental findings, the molecular dynamics simulations reveal that PO4 3- and Fe(CN)6 3- generated by the electrode play synergistic role in repelling Cl- via electrostatic repulsion and dense coverage, which reduced Cl- adsorption by nearly 5-fold. The novel anionic synergy endow superior corrosion protection for the electrode, and is expected to promote the practical application of saline water electrolysis.

Symmetry or asymmetry: which one is the platform of nitrogen vacancies for alkaline hydrogen evolution

Conventional nitrogen vacancies with a symmetric coordination of metal cations (i.e., M1-Nv-M1) play a crucial role in tuning the local environment of the metal sites in metal nitrides and improving their electrochemical activity in the hydrogen evolution reaction (HER). However, the symmetric Nv sites, which feature a uniform charge distribution on adjacent metal sites, suffer from sluggish water dissociation kinetics and a poor capability for hydrogen desorption. Here, we fabricated Cr-doped and Nv-rich Co4N nanorods grown on a Ni foam (Cr-Co4N-Nv/NF) with asymmetric Cr-Nv-Co sites to effectively catalyze hydrogen evolution under alkaline conditions, with a low overpotential of 33 mV at a current density of 10 mA cm-2 and a small Tafel slope of 37 mV dec-1. The experimental characterizations and theoretical simulations collectively reveal that the construction of asymmetric Cr-Nv-Co sites gives rise to the upshift of the d-band center, thus promoting water adsorption and activation. Moreover, asymmetric Nv sites allow a balance between hydrogen adsorption and desorption, which avoids the limited desorption process over the symmetric Co-Nv-Co sites.

Ni-CeO2 Heterostructure Promotes Hydrogen Evolution Reaction via Tuning of the O-H Bond Length of Adsorbed Water at the Electrolyte/Electrode Interface

Understanding the properties and structure of reactant water molecules at the electrolyte solution/electrode interface is relevant to know the mechanisms of hydrogen evolution reaction (HER). However, this approach has rarely been implemented due to the elusive local microenvironment in the vicinity of the catalyst. Taking the Ni-CeO2 heterostructure immobilized onto carbon paper (Ni-CeO2 /CP) as a model, the dynamic behavior of adsorbed intermediates during the reaction was measured by in situ surface-enhanced infrared absorption spectroscopy with attenuated total reflection configuration (ATR-SEIRAS). Theoretical calculations are used in combination to comprehend the potential causes of increased HER activity. The results show that the O-H bond of adsorbed water at the electrolyte solution/electrode interface becomes longer for promoting the dissociation of water and accelerating the kinetically slow Volmer step. In addition, forming the Ni-CeO2 heterostructure interface optimizes the hydrogen adsorption Gibbs free energy, thus increasing HER activity. Therefore, the Ni-CeO2 /CP electrode exhibits remarkably low HER overpotentials of 37 and 119 mV at 10 and 100 mA cm-2 , which are close to commercial Pt/C (16 and 102.6 mV, respectively).

Cooperative Ni(Co)-Ru-P Sites Activate Dehydrogenation for Hydrazine Oxidation Assisting Self-powered H2 Production

Water electrolysis for H2 production is restricted by the sluggish oxygen evolution reaction (OER). Using the thermodynamically more favorable hydrazine oxidation reaction (HzOR) to replace OER has attracted ever-growing attention. Herein, we report a twisted NiCoP nanowire array immobilized with Ru single atoms (Ru1 -NiCoP) as superior bifunctional electrocatalyst toward both HzOR and hydrogen evolution reaction (HER), realizing an ultralow working potential of -60 mV and overpotential of 32 mV for a current density of 10 mA cm-2 , respectively. Inspiringly, two-electrode electrolyzer based on overall hydrazine splitting (OHzS) demonstrates outstanding activity with a record-high current density of 522 mA cm-2 at cell voltage of 0.3 V. DFT calculations elucidate the cooperative Ni(Co)-Ru-P sites in Ru1 -NiCoP optimize H* adsorption, and enhance adsorption of *N2 H2 to significantly lower the energy barrier for hydrazine dehydrogenation. Moreover, a self-powered H2 production system utilizing OHzS device driven by direct hydrazine fuel cell (DHzFC) achieve a satisfactory rate of 24.0 mol h-1  m-2 .

Highly Efficient and Stable Hydrogen Evolution from Natural Seawater by Boron-Doped Three-Dimensional Ni2P-MoO2 Heterostructure Microrod Arrays

The rational design of highly active and stable electrocatalysts toward the hydrogen evolution reaction (HER) is highly desirable but challenging in seawater electrolysis. Herein we propose a strategy of boron-doped three-dimensional Ni2P-MoO2 heterostructure microrod arrays that exhibit excellent catalytic activity for hydrogen evolution in both alkaline freshwater and seawater electrolytes. The incorporation of boron into Ni2P-MoO2 heterostructure microrod arrays could modulate the electronic properties, thereby accelerating the HER. Consequently, the B-Ni2P-MoO2 heterostructure microrod array electrocatalyst exhibits a superior catalyst activity for HER with low overpotentials of 155, 155, and 157 mV at a current density of 500 mA cm-2 in 1 M KOH, 1 M KOH + NaCl, and 1 M KOH + seawater, respectively. It also exhibits exceptional performance for HER in natural seawater with a low overpotential of 248 mV at 10 mA cm-2 and a long-lasting lifetime of over 100 h.

Design and Synthesis of Noble Metal-Based Alloy Electrocatalysts and Their Application in Hydrogen Evolution Reaction

Hydrogen energy is regarded as the ultimate energy source for future human society, and the preparation of hydrogen from water electrolysis is recognized as the most ideal way. One of the key factors to achieve large-scale hydrogen production by water splitting is the availability of highly active and stable electrocatalysts. Although non-precious metal electrocatalysts have made great strides in recent years, the best hydrogen evolution reaction (HER) electrocatalysts are still based on noble metals. Therefore, it is particularly important to improve the overall activity of the electrocatalysts while reducing the noble metals load. Alloying strategies can shoulder the burden of optimizing electrocatalysts cost and improving electrocatalysts performance. With this in mind, recent work on the application of noble metal-based alloy electrocatalysts in the field of hydrogen production from water electrolysis is summarized. In this review, first, the mechanism of HER is described; then, the current development of synthesis methods for alloy electrocatalysts is presented; finally, an example analysis of practical application studies on alloy electrocatalysts in hydrogen production is presented. In addition, at the end of this review, the prospects, opportunities, and challenges facing noble metal-based alloy electrocatalysts are tried to discuss.

Optimized Electronic Modification of S-Doped CuO Induced by Oxidative Reconstruction for Coupling Glycerol Electrooxidation with Hydrogen Evolution

Glycerol (electrochemical) oxidation reaction (GOR) producing organic small molecule acid and coupling with hydrogen evolution reaction is a critical aspect of ensuring balanced glycerol capacity and promoting hydrogen generation on a large scale. However, the development of highly efficient and selective non-noble metal-based GOR electrocatalysts is still a key problem. Here, an S-doped CuO nanorod array catalyst (S-CuO/CF) constructed by sulfur leaching and oxidative remodeling is used to drive GOR at low potentials: It requires potentials of only 1.23 and 1.33 V versus RHE to provide currents of 100 and 500 mA cm-2, respectively. Moreover, it shows satisfactory comprehensive performance (at 100 mA cm-2, Vcell = 1.37 V) when assembled as the anode in asymmetric coupled electrolytic cell. Furthermore, we propose a detailed cycle reaction pathway (in alkaline environment) of S-doped CuO surface promoting GOR to produce formic acid and glycolic acid. Among them, the C-C bond breaking and lattice oxygen deintercalation steps frequently involved in the reaction pathway are the key factors to determine the catalytic performance and product selectivity. This research provides valuable guidance for the development of transition metal-based electrocatalysts for GOR and valuable insights into the glycerol oxidation cycle reaction pathway.

Vertical 3D Nanostructures Boost Efficient Hydrogen Production Coupled with Glycerol Oxidation Under Alkaline Conditions

Hydrogen production from electrolytic water is an important sustainable technology to realize renewable energy conversion and carbon neutrality. However, it is limited by the high overpotential of oxygen evolution reaction (OER) at the anode. To reduce the operating voltage of electrolyzer, herein thermodynamically favorable glycerol oxidation reaction (GOR) is proposed to replace the OER. Moreover, vertical NiO flakes and NiMoNH nanopillars are developed to boost the reaction kinetics of anodic GOR and cathodic hydrogen evolution, respectively. Meanwhile, excluding the explosion risk of mixed H2/O2, a cheap organic membrane is used to replace the expensive anion exchange membrane in the electrolyzer. Impressively, the electrolyzer delivers a remarkable reduction of operation voltage by 280 mV, and exhibits good long-term stability. This work provides a new paradigm of hydrogen production with low cost and good feasibility.

Tailoring a local acid-like microenvironment for efficient neutral hydrogen evolution

Electrochemical hydrogen evolution reaction in neutral media is listed as the most difficult challenges of energy catalysis due to the sluggish kinetics. Herein, the Ir-H_xWO₃ catalyst is readily synthesized and exhibits enhanced performance for neutral hydrogen evolution reaction. H_xWO₃ support is functioned as proton sponge to create a local acid-like microenvironment around Ir metal sites by spontaneous injection of protons to WO₃, as evidenced by spectroscopy and electrochemical analysis. Rationalize revitalized lattice-hydrogen species located in the interface are coupled with H_ad atoms on metallic Ir surfaces via thermodynamically favorable Volmer-Tafel steps, and thereby a fast kinetics. Elaborated Ir-H_xWO₃ demonstrates acid-like activity with a low overpotential of 20 mV at 10 mA cm^-2 and low Tafel slope of 28 mV dec^-1, which are even comparable to those in acidic environment. The concept exemplified in this work offer the possibilities for tailoring local reaction microenvironment to regulate catalytic activity and pathway.

Hydrogen-bond induced and hetero coupling dual effects in N-doped carbon coated CrN/Ni nanosheets for efficient alkaline freshwater/seawater hydrogen evolution

Developing efficient and robust non-precious-metal-based hydrogen evolution reaction (HER) catalysts is highly desirable but remains quite challenging for alkaline freshwater/seawater electrolysis. In the present study, we report a theory-guided design and synthesis of a nickel foam (NF) supported N-doped carbon-coated (NC) nickel (Ni)/chromium nitride (CrN) nanosheets (NC@CrN/Ni) as a highly active and durable electrocatalyst. Our theoretical calculation firstly reveals that CrN/Ni heterostructure can greatly promote the H₂O dissociation via hydrogen-bond induced effect, and the N site can be optimized by hetero coupling to achieve a facile hydrogen associative desorption, thereby significantly boosting alkaline HER. Guided by theoretical calculation, we prepared the nickel-based metal-organic framework as a precursor, and introduced the Cr by the subsequent hydrothermal treatment, finally obtained the target catalyst by ammonia pyrolysis. Such a simple process ensures the exposure of abundant accessible active sites. Consequently, the as-prepared NC@CrN/Ni catalyst exhibits outstanding performance in both alkaline freshwater and seawater, with the respective overpotential of only 24 and 28 mV at a current density of 10 mA cm^-2, respectively. More impressively, the catalyst also possesses superior durability in the constant-current test of 50 h at the different current densities of 10, 100, and 1000 mA cm^-2.

Improved Alkaline Seawater Splitting of NiS Nanosheets by Iron Doping

Seawater electrolysis driven by renewable electricity is deemed a promising and sustainable strategy for green hydrogen production, but it is still formidably challenging. Here, we report an iron-doped NiS nanosheet array on Ni foam (Fe-NiS/NF) as a high-performance and stable seawater splitting electrocatalyst. Such Fe-NiS/NF catalyst needs overpotentials of only 420 and 270 mV at 1000 mA cm^-2 for the oxygen evolution reaction and hydrogen evolution reaction in alkaline seawater, respectively. Furthermore, its two-electrode electrolyzer needs a cell voltage of 1.88 V for 1000 mA cm^-2 with 50 h of long-term electrochemical durability in alkaline seawater. Additionally, in situ electrochemical Raman and infrared spectroscopy were employed to detect the reconstitution process of NiOOH and the generation of oxygen intermediates under reaction conditions.

Nitrogen substitution induced lattice contraction in nickel nanoparticles for electrochemical hydrogen evolution from simulated seawater

Herein, we demonstrate a facile method for the introduction of nitrogen in the lattices of nickel nanoparticles to form NiN_x (x = 0.13, 0.20, 0.27). X-ray absorption spectroscopy reveals the contraction of the Ni-Ni bond and modulated coordination environment after nitrogen introduction. The NiN_0.20 required 87 mV overpotential for -10 mA cm^-2 cathodic current density in simulated seawater. The density functional theory calculations revealed favorable E_H2Oads and ΔG_Hads after N-introduction.

P and Se Binary Vacancies and Heterostructures Modulated MoP/MoSe2 Electrocatalysts for Improving Hydrogen Evolution and Coupling Electricity Generation

It is not enough to develop an ideal hydrogen evolution reaction (HER) electrocatalysts by single strategy. Here, the HER performances are significantly improved by the combined strategies of P and Se binary vacancies and heterostructure engineering, which is rarely explored and remain unclear. As a result, the overpotentials of MoP/MoSe₂ -H heterostructures rich in P and Se binary vacancies are 47 and 110 mV at 10 mA cm^-2 in 1 m KOH and 0.5 m H₂ SO₄ electrolytes, respectively. Especially, in 1 m KOH, the overpotential of MoP/MoSe₂ -H is very close to commercial Pt/C at the beginning and even better than Pt/C when current density is over 70 mA cm^-2 . The strong interactions between MoSe₂ and MoP facilitate electrons transfer from P to Se. Thus, MoP/MoSe₂ -H possesses more electrochemically active sites and faster charge transfer capability, which are all in favor of high HER activities. Additionally, Zn-H₂ O battery with MoP/MoSe₂ -H as cathode is fabricated for simultaneous generation of hydrogen and electricity, which displays the maximum power density of up to 28.1 mW cm^-2 and stable discharging performance for 125 h. Overall, this work validates a vigorous strategy and provides guidance for the development of efficient HER electrocatalysts.

Phase Evolution on the Hydrogen Adsorption Kinetics of NiFe-Based Heterogeneous Catalysts for Efficient Water Electrolysis

Transition metal layered double hydroxides, especially nickel-iron layered double hydroxide (NiFe-LDH) shows significant advancement as efficient oxygen evolution reaction (OER) electrocatalyst but also plays a momentous role as a precursor for NiFe-based hydrogen evolution reaction (HER) catalysts. Herein, a simple strategy for developing Ni-Fe-derivative electrocatalysts via phase evolution of NiFe-LDH under controllable annealing temperatures in an argon atmosphere is reported. The optimized catalyst annealed at 340 ^o C (denoted NiO/FeNi₃ ) exhibits superior HER properties with an ultralow overpotential of 16 mV@10 mA cm^-2 . Density functional theory simulation and in situ Raman analyses reveal that the excellent HER properties of the NiO/FeNi₃ can be attributed to the strong electronic interaction at the interface of the metallic FeNi₃ and semiconducting NiO, which optimizes the H₂ O and H adsorption energies for efficient HER and OER catalytic processes. This work will provide rational insights into the subsequent development of related HER electrocatalysts and other corresponding compounds via LDH-based precursors.

Killing Two Birds with One Stone: Upgrading Organic Compounds via Electrooxidation in Electricity-Input Mode and Electricity-Output Mode

The electrochemically oxidative upgrading reaction (OUR) of organic compounds has gained enormous interest over the past few years, owing to the advantages of fast reaction kinetics, high conversion efficiency and selectivity, etc., and it exhibits great potential in becoming a key element in coupling with electricity, synthesis, energy storage and transformation. On the one hand, the kinetically more favored OUR for value-added chemical generation can potentially substitute an oxygen evolution reaction (OER) and integrate with an efficient hydrogen evolution reaction (HER) or CO₂ electroreduction reaction (CO₂RR) in an electricity-input mode. On the other hand, an OUR-based cell or battery (e.g., fuel cell or Zinc-air battery) enables the cogeneration of value-added chemicals and electricity in the electricity-output mode. For both situations, multiple benefits are to be obtained. Although the OUR of organic compounds is an old and rich discipline currently enjoying a revival, unfortunately, this fascinating strategy and its integration with the HER or CO₂RR, and/or with electricity generation, are still in the laboratory stage. In this minireview, we summarize and highlight the latest progress and milestones of the OUR for the high-value-added chemical production and cogeneration of hydrogen, CO₂ conversion in an electrolyzer and/or electricity in a primary cell. We also emphasize catalyst design, mechanism identification and system configuration. Moreover, perspectives on OUR coupling with the HER or CO₂RR in an electrolyzer in the electricity-input mode, and/or the cogeneration of electricity in a primary cell in the electricity-output mode, are offered for the future development of this fascinating technology.

Defect-Rich PdIr Bimetallene Nanoribbons with Interatomic Charge Localization for Isopropanol-Assisted Seawater Splitting

Metallene with outstanding physicochemical properties is an efficient two-dimensional electrocatalysts for sustainable hydrogen (H₂ ) production applications. However, the controllable fabrication of extended atomically thin metallene nanoribbons remains a formidable challenge. Herein, this work proposes a controllable preparation strategy for atomically thin defect-rich PdIr bimetallene nanoribbons (PdIr BNRs) with a thickness of only 1.5 nm for the efficient and stable isopropanol-assisted seawater electrolytic H₂ production. When using PdIr BNRs as catalyst to build an isopropanol-assisted seawater electrolysis system, a voltage of only 0.38 V is required at @10 mA cm^-2 to achieve energy-saving H₂ production, while producing high value-added acetone at the anode. The aberration-corrected high-resolution transmission electron microscopy (HRTEM) clearly reveals that the PdIr BNRs possess abundant structural defects, which can additionally serve as highly catalytically active sites. Density functional theory (DFT) calculations combined with X-ray absorption spectroscopy studies reveal that the introduction of Ir atoms can induce the formation of a localized charge region and shift the d-band center of Pd down, thereby reducing the adsorption energy on the catalyst in favor of the rapid desorption of H₂ . This work opens the way for the controllable design and construction of defect-rich atomically thin metallene nanoribbons for efficient electrocatalytic applications.

A RuCoBO Nanocomposite for Highly Efficient and Stable Electrocatalytic Seawater Splitting

Efficient and stable electrocatalysts are critically needed for the development of practical overall seawater splitting. The nanocomposite of RuCoBO has been rationally engineered to be an electrocatalyst that fits these criteria. The study has shown that a calcinated RuCoBO-based nanocomposite (Ru₂Co₁BO-350) exhibits an extremely high catalytic activity for H₂ and O₂ production in alkaline seawater (overpotentials of 14 mV for H₂ evolution and 219 mV for O₂ evolution) as well as a record low cell voltage (1.466 V@10 mA cm^-2) and long-term stability (230 h @50 mA cm^-2 and @100 mA cm^-2) for seawater splitting. The results show that surface reconstruction of Ru₂Co₁BO-350 occurs during hydrogen evolution reaction and oxygen evolution reaction, which leads to the high activity and stability of the catalyst. The reconstructed surface is highly resistant to Cl^- corrosion. The investigation suggests that a new strategy exists for the design of high-performance Ru-based electrocatalysts that resist anodic corrosion during seawater splitting.

Enhancing Resistance to Chloride Corrosion by Controlling the Morphologies of PtNi Electrocatalysts for Alkaline Seawater Hydrogen Evolution

A solvothermal method to prepare PtNi alloys that have differing morphologies is described. By adjusting the feed ratio of Pt and Ni precursors in this process, PtNi alloys with different compositions (Pt : Ni atomic ratio from 1 : 3 to 3 : 1) and morphologies (evolution from nanobranches to nanoparticles) are generated. The prepared Pt₄₈ Ni₅₂ alloy, which has a composite morphology comprised of nanobranches and nanoparticles, exhibits superior activity and durability towards the hydrogen evolution reaction (HER) in seawater compared to those of commercial Pt/C catalyst and other PtNi alloys that have different compositions and morphologies. The excellent seawater HER performance of Pt₄₈ Ni₅₂ is ascribed to its nanobranch/nanoparticle morphology that optimally facilitates electron accumulation on Pt, which enhances resistance to chloride corrosion in seawater.

Superaerophilic/superaerophobic cooperative electrode for efficient hydrogen evolution reaction via enhanced mass transfer

Hydrogen evolution reaction (HER), as an effective method to produce green hydrogen, is greatly impeded by inefficient mass transfer, i.e., bubble adhesion on electrode, bubble dispersion in the vicinity of electrode, and poor dissolved H₂ diffusion, which results in blocked electrocatalytic area and large H₂ concentration overpotential. Here, we report a superaerophilic/superaerophobic (SAL/SAB) cooperative electrode to efficiently promote bubble transfer by asymmetric Laplace pressure and accelerate dissolved H₂ diffusion through reducing diffusion distance. Benefiting from the enhanced mass transfer, the overpotential for the SAL/SAB cooperative electrode at -10 mA cm^-2 is only -19 mV, compared to -61 mV on the flat Pt electrode. By optimizing H₂SO₄ concentration, the SAL/SAB cooperative electrode can achieve ultrahigh current density (-1867 mA cm^-2) at an overpotential of -500 mV. We can envision that the SAL/SAB cooperative strategy is an effective method to improve HER efficiency and stimulate the understanding of various gas-involved processes.