Artificial Nacre with High Toughness Amplification Factor: Residual Stress-Engineering Sparks Enhanced Extrinsic Toughening Mechanisms

Guidelines derived from biomineralized tissues for design and construction of high-performance biomimetic materials: from weak to strong

Living organisms in nature have undergone continuous evolution over billions of years, resulting in the formation of high-performance fracture-resistant biomineralized tissues such as bones and teeth to fulfill mechanical and biological functions, despite the fact that most inorganic biominerals that constitute biomineralized tissues are weak and brittle. During the long-period evolution process, nature has evolved a number of highly effective and smart strategies to design chemical compositions and structures of biomineralized tissues to enable superior properties and to adapt to surrounding environments. Most biomineralized tissues have hierarchically ordered structures consisting of very small building blocks on the nanometer scale (nanoparticles, nanofibers or nanoflakes) to reduce the inherent weaknesses and brittleness of corresponding inorganic biominerals, to prevent crack initiation and propagation, and to allow high defect tolerance. The bioinspired principles derived from biomineralized tissues are indispensable for designing and constructing high-performance biomimetic materials. In recent years, a large number of high-performance biomimetic materials have been prepared based on these bioinspired principles with a large volume of literature covering this topic. Therefore, a timely and comprehensive review on this hot topic is highly important and contributes to the future development of this rapidly evolving research field. This review article aims to be comprehensive, authoritative, and critical with wide general interest to the science community, summarizing recent advances in revealing the formation processes, composition, and structures of biomineralized tissues, providing in-depth insights into guidelines derived from biomineralized tissues for the design and construction of high-performance biomimetic materials, and discussing recent progress, current research trends, key problems, future main research directions and challenges, and future perspectives in this exciting and rapidly evolving research field.

Sustainable liquid metal-induced conductive nacre

Nacre has inspired research to fabricate tough bulk composites for practical applications using inorganic nanomaterials as building blocks. However, with the considerable pressure to reduce global carbon emissions, preparing nacre-inspired composites remains a significant challenge using more economical and environmentally friendly building blocks. Here we demonstrate tough and conductive nacre by assembling aragonite platelets exfoliated from natural nacre, with liquid metal and sodium alginate used as the "mortar". The formation of GaOC coordination bonding between the gallium ions and sodium alginate molecules reduces the voids and improves compactness. The resultant conductive nacre exhibits much higher mechanical properties than natural nacre. It also shows excellent impact resistance attributed to the synergistic strengthening and toughening fracture mechanisms induced by liquid metal and sodium alginate. Furthermore, our conductive nacre exhibits exceptional self-monitoring sensitivity for maintaining structural integrity. The proposed strategy provides a novel avenue for turning natural nacre into a valuable green composite.

Flexible Cages Enable Robust Supramolecular Elastomers

Advances in modern industrial technology continue to place stricter demands on engineering polymeric materials, but simultaneously possessing superior strength and toughness remains a daunting challenge. Herein, a pioneering flexible cage-reinforced supramolecular elastomer (CSE) is reported that exhibits superb robustness, tear resistance, anti-fatigue, and shape memory properties, achieved by innovatively introducing organic imide cages (OICs) into supramolecular networks. Intriguingly, extremely small amounts of OICs make the elastomer stronger, significantly improving mechanical strength (85.0 MPa; ≈10-fold increase) and toughness (418.4 MJ m-3; ≈7-fold increase). Significantly, the cooperative effect of gradient hydrogen bonds and OICs is experimentally and theoretically demonstrated as flexible nodes, enabling more robust supramolecular networks. In short, the proposed strengthening strategy of adding flexible cages effectively balances the inherent conflict between material strength and toughness, and the prepared CSEs are anticipated to be served in large-scale devices such as TBMs in the future.

Ultrafast universal fabrication of configurable porous silicone-based elastomers by Joule heating chemistry

Silicone-based elastomers (SEs) have been extensively applied in numerous cutting-edge areas, including flexible electronics, biomedicine, 5G smart devices, mechanics, optics, soft robotics, etc. However, traditional strategies for the synthesis of polymer elastomers, such as bulk polymerization, suspension polymerization, solution polymerization, and emulsion polymerization, are inevitably restricted by long-time usage, organic solvent additives, high energy consumption, and environmental pollution. Here, we propose a Joule heating chemistry method for ultrafast universal fabrication of SEs with configurable porous structures and tunable components (e.g., graphene, Ag, graphene oxide, TiO2, ZnO, Fe3O4, V2O5, MoS2, BN, g-C3N4, BaCO3, CuI, BaTiO3, polyvinylidene fluoride, cellulose, styrene-butadiene rubber, montmorillonite, and EuDySrAlSiOx) within seconds by only employing H2O as the solvent. The intrinsic dynamics of the in situ polymerization and porosity creation of these SEs have been widely investigated. Notably, a flexible capacitive sensor made from as-fabricated silicone-based elastomers exhibits a wide pressure range, fast responses, long-term durability, extreme operating temperatures, and outstanding applicability in various media, and a wireless human-machine interaction system used for rescue activities in extreme conditions is established, which paves the way for more polymer-based material synthesis and wider applications.

Bottom-Up Film-to-Bulk Assembly Toward Bioinspired Bulk Structural Nanocomposites

Biological materials, although composed of meager minerals and biopolymers, often exhibit amazing mechanical properties far beyond their components due to hierarchically ordered structures. Understanding their structure-properties relationships and replicating them into artificial materials would boost the development of bulk structural nanocomposites. Layered microstructure widely exists in biological materials, serving as the fundamental structure in nanosheet-based nacres and nanofiber-based Bouligand tissues, and implying superior mechanical properties. High-efficient and scalable fabrication of bioinspired bulk structural nanocomposites with precise layered microstructure is therefore important yet remains difficult. Here, one straightforward bottom-up film-to-bulk assembly strategy is focused for fabricating bioinspired layered bulk structural nanocomposites. The bottom-up assembly strategy inherently offers a methodology for precise construction of bioinspired layered microstructure in bulk form, availability for fabrication of bioinspired bulk structural nanocomposites with large sizes and complex shapes, possibility for design of multiscale interfaces, feasibility for manipulation of diverse heterogeneities. Not limited to discussing what has been achieved by using the current bottom-up film-to-bulk assembly strategy, it is also envisioned how to promote such an assembly strategy to better benefit the development of bioinspired bulk structural nanocomposites. Compared to other assembly strategies, the highlighted strategy provides great opportunities for creating bioinspired bulk structural nanocomposites on demand.

Bioinspired Organic Porous Coupling Agent for Enhancement of Nanoparticle Dispersion and Interfacial Strength

Composite materials have significantly advanced with the integration of inorganic nanoparticles as fillers in polymers. Achieving fine dispersion of these nanoparticles within the composites, however, remains a challenge. This study presents a novel solution inspired by the natural structure of Xanthium. We have developed a polymer of intrinsic microporosity (PIM)-based porous coupling agent, named PCA. PCA's rigid backbone structure enhances interfacial interactions through a unique intermolecular interlocking mechanism. This approach notably improves the dispersion of SiO2 nanoparticles in various organic solvents and low-polarity polymers. Significantly, PCA-modified SiO2 nanoparticles embedded in polyisoprene rubber showed enhanced mechanical properties. The Young's modulus increases to 30.7 MPa, compared to 5.4 MPa in hexadecyltrimethoxysilane-modified nanoparticles. Further analysis shows that PCA-modified composites not only become stiffer but also gain strength and ductility. This research demonstrates a novel biomimetic strategy for enhancing interfacial interactions in composites, potentially leading to stronger, more versatile composite materials.

Magnesium Hydroxide as a Versatile Nanofiller for 3D-Printed PLA Bone Scaffolds

Polylactic acid (PLA) has attracted much attention in bone tissue engineering due to its good biocompatibility and processability, but it still faces problems such as a slow degradation rate, acidic degradation product, weak biomineralization ability, and poor cell response, which limits its wider application in developing bone scaffolds. In this study, Mg(OH)2 nanoparticles were employed as a versatile nanofiller for developing PLA/Mg(OH)2 composite bone scaffolds using fused deposition modeling (FDM) 3D printing technology, and its mechanical, degradation, and biological properties were evaluated. The mechanical tests revealed that a 5 wt% addition of Mg(OH)2 improved the tensile and compressive strengths of the PLA scaffold by 20.50% and 63.97%, respectively. The soaking experiment in phosphate buffered solution (PBS) revealed that the alkaline degradation products of Mg(OH)2 neutralized the acidic degradation products of PLA, thus accelerating the degradation of PLA. The weight loss rate of the PLA/20Mg(OH)2 scaffold (15.40%) was significantly higher than that of PLA (0.15%) on day 28. Meanwhile, the composite scaffolds showed long-term Mg2+ release for more than 28 days. The simulated body fluid (SBF) immersion experiment indicated that Mg(OH)2 promoted the deposition of apatite and improved the biomineralization of PLA scaffolds. The cell culture of bone marrow mesenchymal stem cells (BMSCs) indicated that adding 5 wt% Mg(OH)2 effectively improved cell responses, including adhesion, proliferation, and osteogenic differentiation, due to the release of Mg2+. This study suggests that Mg(OH)2 can simultaneously address various issues related to polymer scaffolds, including degradation, mechanical properties, and cell interaction, having promising applications in tissue engineering.

A tough bio-adhesive inspired by pearl layer and arthropod cuticle structure with desirable water resistance, flame-retardancy, and antibacterial property

Petroleum-derived formaldehyde resin adhesives are serious hazards to human health and depend on limited resources. Abundant, cheap and renewable biomass materials are expected to replace them. However, the contradictory mechanisms of high mechanical strength and fracture toughness affect the use of bioadhesives. Herein, a biomimetic soybean meal (SM) adhesive inspired by the structure of insect cuticles and shell pearl layer was proposed. Specifically, chitosan (CS@DA) modified 3,4-dihydroxybenzoic acid (DA, rich in catechol moiety) was anchored on molybdenum disulfide nanosheets (MoS2) to construct a biomimetic structure with copper hydroxide and SM substrate (SM-MoS2/CS@DA-Cu). Schiff base, ionic, and hydrogen bonding strengthened the cohesion of the adhesive. The ordered alternating stacking "brick-mortar" structure stimulated the lamellar sliding and crack deflection of MoS2, synergistically reinforcing the toughness. Compared to SM adhesive (0.57 MPa and 0.148 J), the wet shear strength and adhesion work of the SM-MoS2/CS@DA-Cu were 1.68 MPa and 0.867 J, with 194.7 % and 485.8 % increases, respectively. The multiple antimicrobial effects of CS@DA, Schiff base, and Cu2+ increased the applicability period of the adhesive to 40 days. The adhesive also displayed favorable water resistance and flame retardancy. Therefore, this peculiar and efficient biomimetic structural design inspired the development of multi-functional composites.

Nanograded artificial nacre with efficient energy dissipation

The renowned mechanical performance of biological ceramics can be attributed to their hierarchical structures, wherein structural features at the nanoscale play a crucial role. However, nanoscale features, such as nanogradients, have rarely been incorporated in biomimetic ceramics because of the challenges in simultaneously controlling the material structure at multiple length scales. Here, we report the fabrication of artificial nacre with graphene oxide nanogradients in its aragonite platelets through a matrix-directed mineralization method. The gradients are formed via the spontaneous accumulation of graphene oxide nanosheets on the surface of the platelets during the mineralization process, which then induces a lateral residual stress field in the platelets. Nanoindentation tests and mercury intrusion porosimetry demonstrate that the material's energy dissipation is enhanced both intrinsically and extrinsically through the compressive stress near the platelet surface. The energy dissipation density reaches 0.159 ± 0.007 nJ/μm3, and the toughness amplification is superior to that of the most advanced ceramics. Numerical simulations also agree with the finding that the stress field notably contributes to the overall energy dissipation. This work demonstrates that the energy dissipation of biomimetic ceramics can be further increased by integrating design principles spanning multiple scales. This strategy can be readily extended to the combinations of other structural models for the design and fabrication of structural ceramics with customized and optimized performance.

Biomimetic Mineralization: From Microscopic to Macroscopic Materials and Their Biomedical Applications

Biomineralization is an attractive pathway to produce mineral-based biomaterials with high performance and hierarchical structures. To date, the biomineralization process and mechanism have been extensively studied, especially for the formation of bone, teeth, and nacre. Inspired by those, abundant biomimetic mineralized materials have been fabricated for biomedical applications. Those bioinspired materials generally exhibit great mechanical properties and biological functions. Nevertheless, substantial gaps remain between biomimetic materials and natural materials, particularly with respect to mechanical properties and mutiscale structures. This Review summarizes the recent progress of micro- and macroscopic biomimetic mineralization from the perspective of materials synthesis and biomedical applications. To begin with, we discuss the progress of biomimetic mineralization at the microscopic level. The mechanical strength, stability, and functionality of the nano- and micromaterials are significantly improved by introducing biominerals, such as DNA nanostructures, nanovaccines, and living cells. Next, numerous biomimetic strategies based on biomineralization at the macroscopic scale are highlighted, including in situ mineralization and bottom-up assembly of mineralized building blocks. Finally, challenges and future perspectives regarding the development of biomimetic mineralization are also presented with the aim of offering insights for the rational design and fabrication of next-generation biomimetic mineralized materials.

Multi-Functionalization of Single crystals Mediated by Gel-Incorporation: A Bioinspired Strategy

Biominerals are inherently organic-inorganic crystal composites. Drawing inspiration from this biomineral structure, functionalized single crystals can be synthesized using the gel-grown method, resulting in the incorporation of gel-networks into the host crystals. By incorporating gel-networks, diverse guest materials, such as nanoparticles and dye molecules, can be uniformly and isotropically distributed within the crystals, thereby imparting non-intrinsic optical or magnetic properties to the host crystals. Additionally, gel-incorporation enhances the toughness and stability of the crystals as the incorporated gel-fibers and accompanying guest materials act as bridges to prevent crack propagation. Furthermore, gel-incorporation enables protein crystals to exhibit self-healing properties, which can be attributed to the dynamic bonding interaction between gel-networks and crystals. Notably, recent research has demonstrated that the incorporation of zwitterionic gel-networks enhances the charge effects on crystal morphology evolution as the charged groups become bound to the developing crystal surfaces, and their detachment is impeded by the interconnected gel-networks. Therefore, preparing single crystals with gel-incorporation is a remarkable strategy for synthesizing functionalized crystal materials.

Purification of Intramineral Peptides from Cuttlebones and In Vitro Activity in CaCO3 Biomineralization

Living organisms develop functional hard structures such as teeth, bones, and shells from calcium salts through mineralization for managing vital functions to sustain life. However, the exact mechanism or role of biomolecules such as proteins and peptides in the biomineralization process to form defect-free hierarchical structures in nature is poorly understood. In this study, we have extracted, purified, and characterized five major peptides (CBP1-CBP5) from the soluble organic materials (SOMs) of cuttlefish bone (CB) and used for the in vitro mineralization of calcium carbonate crystals. The SOMs induced nucleation of the calcite phase at low concentrations and the vaterite phase at high concentrations. The purified peptides nucleated calcite crystals and enhanced aggregation under laboratory conditions. Among five peptides, only CBP2 and CBP3 showed concentration-dependent nucleation, aggregation, and morphological changes of the calcite crystals within 12 h. Circular dichroism studies showed that the peptides CBP2 and CBP3 are in alpha helix and β-sheet conformation, respectively, in solution. CBP1 and CBP4 and CBP5 are in random coil and β-sheet conformation, respectively. In addition, the peptides showed different sizes in solution in the absence (∼27 nm, low aggregation) and presence (∼118 nm, high aggregation) of calcium ions. Aragonite crystals with needle-type morphologies were nucleated in the presence of Mg²⁺ ions in solution. Overall, exploring the activities of such intramineral peptides from CB help to unravel the mechanism of calcium salt deposition in nature.

Molecular Orientation-Regulated Bioinspired Multilayer Composites with Largely Enhanced Mechanical Properties

Natural nacre's hierarchical brick-and-mortar architecture motivates intensive studies on inorganic platelet/polymer multilayer composites, targeting mechanical property enhancement only by two strategies: optimizing the size and alignment of inorganic platelets and improving the interfacial interaction between inorganic platelets and polymers. Herein, a new strategy of polymer chain orientation to enhance the property of bioinspired multilayered composites is presented, which facilitates more stress to be transferred from polymer layers to inorganic platelets by simultaneous stiffening of multiple polymer chains. To this end, bioinspired multilayer films consisting of oriented sodium carboxymethyl cellulose chains and alumina platelets are designed and fabricated by three successive steps of water evaporation-induced gelation in glycerol, high-ratio prestretching, and Cu²⁺ infiltration. Regulating the orientation state of sodium carboxymethyl cellulose leads to a large enhancement of mechanical properties, including Young's modulus (2.3 times), tensile strength (3.2 times), and toughness (2.5 times). It is observed experimentally and predicted theoretically that the increased chain orientation induces failure mode transition in the multilayered films from alumina platelet pull-out to alumina platelet fracture because more stress is transferred to the platelets. This strategy opens an avenue toward rational design and manipulation of polymer aggregation states in inorganic platelet/polymer multilayer composites and allows a highly effective increase in modulus, strength, and toughness.

Morphological Evolution of Calcite Grown in Zwitterionic Hydrogels: Charge Effects Enhanced by Gel-Incorporation

The incorporation of charged biomacromolecules is widely found in biomineralization. To investigate the significance of this biological strategy for mineralization control, gelatin-incorporated calcite crystals grown from gelatin hydrogels with different charge concentrations along the gel networks are examined. It is found that the bound charged groups on gelatin networks (amino cations, gelatin-NH₃ ⁺ and carboxylic anions, gelatin-COO^- ) play crucial roles in controlling the single-crystallinity and the crystal morphology. And the charge effects are greatly enhanced by the gel-incorporation because the incorporated gel networks force the bound charged groups on them to attach to crystallization fronts. In contrast, ammonium ions (NH₄ ⁺ ) and acetate ions (Ac^- ) dissolve in the crystallization media do not exhibit the similar charge effects because the balance of attachment/detachment make them more difficult to be incorporated. Employing the revealed charge effects, the calcite crystal composites with different morphologies can be flexibly prepared.

Determination of the Pressure Dependence of Raman Mode for an Alumina-Glass Pair in Hertzian Contact

Optimising the performance of materials requires, among other things, the characterisation of residual stresses during the design stage. Raman spectroscopy offers access to these residual stresses at the micrometre scale when this inelastic light scattering is active in these materials. In this case, the relationship between the Raman mode shift and the pressure must be known. High-pressure cells with diamond anvils or bending instruments coupled to Raman spectrometers are habitually used to determine this relationship. In this article, we propose a new method that involves a Hertzian contact to obtain this relationship. A device that compresses an alumina ball against a transparent glass plane is connected to a Raman spectrometer. Under these conditions, the contact pressure can be as high as 1.5 GPa. The contact between the glass plane and the ball is observed through a diaphragm. Several hundred Raman spectra are recorded depending on the contact diameter. The spectral profiles obtained represent the shift in the Raman modes of alumina and glass along the contact diameter. Hertz's theory accurately describes the pressure profile as a function of position for elastic materials. Therefore, the contact diameter can be measured by fitting the spectral profile with a function identical to the Hertz profile. We then deduce the maximum pressure. Next, the calculated pressure profile along the contact diameter is correlated with the spectral profile. We obtain a pressure dependence of the Raman mode with a coefficient equal to 2.07 cm-1/GPa for the Eg modes of alumina at 417 cm-1, which is in good agreement with the literature. In the case of glass, we refine the measurement of the Q3 mode shift at 1096 cm-1 in the studied pressure range compared to the literature. We find a coefficient of 4.31 cm-1/GPa. This work on static contacts opens up promising prospects for investigations into dynamic contacts in tribology.

Ultralight and Superelastic Gd2O3/Bi2O3 Nanofibrous Aerogels with Nacre-Mimetic Brick-Mortar Structure for Superior X-ray Shielding

The widespread use of X-rays has prompted a surge in demand for effective and wearable shielding materials. However, the Pb-containing materials currently used to shield X-rays are commonly bulky, hard, and biotoxic, severely limiting their applications in wearable scenarios. Inspired by the nacre, we report on ultralight, superelastic, and nontoxic X-ray shielding nanofibrous aerogels with microarch-engineered brick/mortar structure by combining polyurethane/Bi₂O₃ nanofibers (brick) and Gd₂O₃ nanosheets (mortar). The synergistic attenuation effect toward X-rays from the reflection of microarches and absorption of Bi/Gd elements significantly enhances the shielding efficiency of aerogels, and microarches/robust nanofibrous networks endow the materials with superelasticity. The resultant materials exhibit integrated properties of superior X-ray shielding efficiency (91-100%), ultralow density (52 mg cm^-3), large stretchability of 800% reversible elongation, and high water vapor permeability (8.8 kg m^-2 day^-1). The fabrication of such novel aerogels paves the way for developing next-generation effective and wearable X-ray shielding materials.

Matrix-Directed Mineralization for Bulk Structural Materials

Mineral-based bulk structural materials (MBSMs) are known for their long history and extensive range of usage. The inherent brittleness of minerals poses a major problem to the performance of MBSMs. To overcome this problem, design principles have been extracted from natural biominerals, in which the extraordinary mechanical performance is achieved via the hierarchical organization of minerals and organics. Nevertheless, precise and efficient fabrication of MBSMs with bioinspired hierarchical structures under mild conditions has long been a big challenge. This Perspective provides a panoramic view of an emerging fabrication strategy, matrix-directed mineralization, which imitates the in vivo growth of some biominerals. The advantages of the strategy are revealed by comparatively analyzing the conventional fabrication techniques of artificial hierarchically structured MBSMs and the biomineral growth processes. By introducing recent advances, we demonstrate that this strategy can be used to fabricate artificial MBSMs with hierarchical structures. Particular attention is paid to the mass transport and the precursors that are involved in the mineralization process. We hope this Perspective can provide some inspiring viewpoints on the importance of biomimetic mineralization in material fabrication and thereby spur the biomimetic fabrication of high-performance MBSMs.