Visualizing Dynamic Mechanical Actions with High Sensitivity and High Resolution by Near-Distance Mechanoluminescence Imaging

Microstrain-Stimulated Elastico-Mechanoluminescence with Dual-Mode Stress Sensing

Elastico-mechanoluminescence technology has shown significant application prospects in stress sensing, artificial skin, remote interaction, and other research areas. Its progress mainly lies in realizing stress visualization and 2D or even 3D stress-sensing effects using a passive sensing mode. However, the widespread promotion of mechanoluminescence (ML) technology is hindered by issues such as high stress or strain thresholds and a single sensing mode based on luminous intensity. In this study, a highly efficient green-emitting ML with dual-mode stress-sensing characteristics driven by microscale strain is developed using LiTaO3:Tb3+. In addition to single-mode sensing based on the luminous intensity, the self-defined parameter (Q) is also introduced as a dual-mode factor for sensing the stress velocity. Impressively, the fabricated LiTaO3:Tb3+ film is capable of generating discernible ML signals even when supplied with strains as low as 500 µst. This is the current minimum strain value that can drive green-emitting ML. This study offers an ideal photonic platform for exploring the potential applications of rare-earth-doped elastico-ML materials in remote interaction devices, high-precision stress sensors, and single-molecule biological imaging.

MXene-Based Pressure Sensor with a Self-Healing Property for Joule Heating and Friction Sliding

As a kind of flexible electronic device, flexible pressure sensor has attracted wide attention in medical monitoring and human-machine interaction. With the continuous deepening of research, high-sensitivity sensor is developing from single function to multi-function. However, Current multifunctional sensors lack the ability to integrate joule heating, detect sliding friction, and self-healing. Herein, a MXene/polyurethane (PU) flexible pressure sensor with a self-healing property for joule heating and friction sliding is fabricated. The MXene/PU sensitive layer with special spinosum structure is prepared by a simple spraying method. After face-to-face assembly of the sensitive layers, the MXene/PU flexible pressure sensor is obtained and showed excellent sensitivity (150.65 kPa-1), fast response/recovery speed (75.5/63.9 ms), and good stability (10 000 cycles). Based on the self-healing property of PU, the sensor also has the ability to heal after mechanical damage. In addition, the sensor realizes the joule heating function under low voltage, and has the real-time monitoring ability of sliding objects. Combined with low cost and simple manufacturing method, the multi-functional MXene/PU flexible sensor shows a wide range of application potential in human activity monitoring, thermal management, and slip recognition.

Quantifying the interfacial triboelectricity in inorganic-organic composite mechanoluminescent materials

Mechanoluminescence (ML) sensing technologies open up new opportunities for intelligent sensors, self-powered displays and wearable devices. However, the emission efficiency of ML materials reported so far still fails to meet the growing application requirements due to the insufficiently understood mechano-to-photon conversion mechanism. Herein, we propose to quantify the ability of different phases to gain or lose electrons under friction (defined as triboelectric series), and reveal that the inorganic-organic interfacial triboelectricity is a key factor in determining the ML in inorganic-organic composites. A positive correlation between the difference in triboelectric series and the ML intensity is established in a series of composites, and a 20-fold increase in ML intensity is finally obtained by selecting an appropriate inorganic-organic combination. The interfacial triboelectricity-regulated ML is further demonstrated in multi-interface systems that include an inorganic phosphor-organic matrix and organic matrix-force applicator interfaces, and again confirmed by self-oxidization and reduction of emission centers under continuous mechanical stimulus. This work not only gives direct experimental evidences for the underlying mechanism of ML, but also provides guidelines for rationally designing high-efficiency ML materials.

Contact-separation-induced self-recoverable mechanoluminescence of CaF2:Tb3+/PDMS elastomer

Centrosymmetric-oxide/polydimethylsiloxane elastomers emit ultra-strong non-pre-irradiation mechanoluminescence under stress and are considered one of the most ideal mechanoluminescence materials. However, previous centrosymmetric-oxide/polydimethylsiloxane elastomers show severe mechanoluminescence degradation under stretching, which limits their use in applications. Here we show an elastomer based on centrosymmetric fluoride CaF2:Tb3+ and polydimethylsiloxane, with mechanoluminescence that can self-recover after each stretching. Experimentation indicates that the self-recoverable mechanoluminescence of the CaF2:Tb3+/polydimethylsiloxane elastomer occurs essentially due to contact electrification arising from contact-separation interactions between the centrosymmetric phosphors and the polydimethylsiloxane. Accordingly, a contact-separation cycle model of the phosphor-polydimethylsiloxane couple is established, and first-principles calculations are performed to model state energies in the contact-separation cycle. The results reveal that the fluoride-polydimethylsiloxane couple helps to induce contact electrification and maintain the contact-separation cycle at the interface, resulting in the self-recoverable mechanoluminescence of the CaF2:Tb3+/polydimethylsiloxane elastomer. Therefore, it would be a good strategy to develop self-recoverable mechanoluminescence elastomers based on centrosymmetric fluoride phosphors and polydimethylsiloxane.

A Bifunctional Luminescent Whitening and Sensing Material Based on Photoluminescence and Mechanoluminescence

A bifunctional luminescent whitening and luminescent sensing composite material, BaMgAl12O17:Eu2+/polydimethylsiloxane (BAM/PDMS), that utilizes natural sunlight and mechanical energy is presented. By increasing the Eu2+ content, the photoluminescence (PL) excitation spectrum of the material shows a maximum redshift of 23 nm due to 5d level splitting of Eu2+, resulting in more spectral overlap with sunlight and an excellent PL whitening effect. Meanwhile, the self-recoverable mechanoluminescence (ML) of the material can be easily excited under mechanical stimuli due to contact electrification, exhibiting a unique stress sensing effect. Based on the unique features of PL whitening and ML sensing, the material is applied to model cars through a spray process, and the results demonstrate that the bifunctional BAM/PDMS material shows promising applications in automobile decoration.

Interfacial Triboelectricity Lights Up Phosphor-Polymer Elastic Composites: Unraveling the Mechanism of Mechanoluminescence in Zinc Sulfide Microparticle-Embedded Polydimethylsiloxane Films

Composites comprising copper-doped zinc sulfide phosphor microparticles embedded in polydimethylsiloxane (ZnS:Cu-PDMS) have received significant attention over the past decade because of their bright and durable mechanoluminescence (ML); however, the underlying mechanism of this unique ML remains unclear. This study reports empirical and theoretical findings that confirm this ML is an electroluminescence (EL) of the ZnS:Cu phosphor induced by the triboelectricity generated at the ZnS:Cu microparticle-PDMS matrix interface. ZnS:Cu microparticles that exhibit bright ML are coated with alumina, an oxide with strong positive triboelectric properties; the contact separation between this oxide coating and PDMS, a polymer with strong negative triboelectric properties, produces sufficient interfacial triboelectricity to induce EL in ZnS:Cu microparticles. The ML of ZnS:Cu-PDMS composites varies on changing the coating material, exhibiting an intensity that is proportional to the amount of interfacial triboelectricity generated in the system. Finally, based on these findings, a mechanism that explains the ML of phosphor-polymer elastic composites (interfacial triboelectric field-driven alternating-current EL model) is proposed in this study. It is believed that understanding this mechanism will enable the development of new materials (beyond ZnS:Cu-PDMS systems) with bright and durable ML.

Visualized Stress-Temperature Sensor with the Zinc Sulfide and Perovskite Glass Ceramics Composite

The visualized dual-modal stress-temperature sensing refers to the ability of a sensor to provide real-time and visible information about both stress and temperature and has indeed attracted significant interest in various fields. However, the development of convenient methods for achieving this capability remains a challenge. In this work, a dual-modal stress-temperature sensor is successfully fabricated using a ZnS/Cu@CsPbBr1.2I1.8 glass ceramics (GCs)/polydimethylsiloxane (PDMS) (ZCP) composite film. The tunable ML color is achieved by modulating the concentration of CsPbBr1.2I1.8 GCs in the ZCP composite films based on the light conversion process from ZnS/Cu to CsPbBr1.2I1.8 GCs. Additionally, the stress and temperature can be visualized simultaneously by integrating the ML intensity and ML color of the ZCP composite film. This feature allows for the real-time monitoring of automotive tire temperature by embedding the ZCP composite film on the tire surface, enabling a strong and stable response to both stress and temperature changes. Overall, this work offers a convenient, efficient, and repeatable approach for achieving visualized dual-modal stress-temperature sensing in the fields of mechanical engineering, structural health monitoring, and intelligent devices.

Ultrasensitive and robust mechanoluminescent living composites

Mechanosensing, the transduction of extracellular mechanical stimuli into intracellular biochemical signals, is a fundamental property of living cells. However, endowing synthetic materials with mechanosensing capabilities comparable to biological levels is challenging. Here, we developed ultrasensitive and robust mechanoluminescent living composites using hydrogels embedded with dinoflagellates, unicellular microalgae with a near-instantaneous and ultrasensitive bioluminescent response to mechanical stress. Not only did embedded dinoflagellates retain their intrinsic mechanoluminescence, but with hydrophobic coatings, living composites had a lifetime of ~5 months under harsh conditions with minimal maintenance. We 3D-printed living composites into large-scale mechanoluminescent structures with high spatial resolution, and we also enhanced their mechanical properties with double-network hydrogels. We propose a counterpart mathematical model that captured experimental mechanoluminescent observations to predict mechanoluminescence based on deformation and applied stress. We also demonstrated the use of the mechanosensing composites for biomimetic soft actuators that emitted colored light upon magnetic actuation. These mechanosensing composites have substantial potential in biohybrid sensors and robotics.

Optimizing the Mechanoluminescent Properties of CaZnOS:Tb via Microwave-Assisted Synthesis: A Comparative Study with Conventional Thermal Methods

Recent developments in lighting and display technologies have led to an increased focus on materials and phosphors with high efficiency, chemical stability, and eco-friendliness. Mechanoluminescence (ML) is a promising technology for new lighting devices, specifically in pressure sensors and displays. CaZnOS has been identified as an efficient ML material, with potential applications as a stress sensor. This study focuses on optimizing the mechanoluminescent properties of CaZnOS:Tb through microwave-assisted synthesis. We successfully synthesized CaZnOS doped with Tb3+ using this method and compared it with samples obtained through conventional solid-state methods. We analyzed the material's characteristics using various techniques to investigate their structural, morphological, and optical properties. We then studied the material's mechanoluminescent properties through single impacts with varying energies. Our results show that materials synthesized through microwave methods exhibit similar optical and, primarily, mechanoluminescent properties, making them suitable for use in photonics applications. The comparison of the microwave and conventional solid-state synthesis methods highlights the potential of microwave-assisted methods to optimize the properties of mechanoluminescent materials for practical applications.

Multi-Dimensional Mechanical Mapping Sensor Based on Flexoelectric-Like and Optical Signals

Mechanical sensors execute multi-mode response to external force, which are cornerstones for applications in human-machine interactions and smart wearable equipments. Nevertheless, an integrated sensor responding to mechanical stimulation variables and providing the information of the corresponding signals, as velocity, direction, and stress distribution, remains a challenge. Herein, a Nafion@Ag@ZnS/polydimethylsiloxanes (PDMS) composite sensor is explored, which realizes the description of mechanical action via optics and electronics signals simultaneously. Combined with the mechano-luminescence (ML) originated from ZnS/PDMS and the flexoelectric-like effect of Nafion@Ag, the corresponding explored sensor achieves the detection of magnitude, direction, velocity, mode of mechanical stimulation, and the visualization of the stress distribution. Moreover, the outstanding cyclic stability, linearity response character, and rapid response time are demonstrated. Accordingly, the intelligent recognition and manipulation of a target are realized, which indicate a smarter human-machine interface sensing applied for wearable devices and mechanical arms can be expected.

Technology Roadmap for Flexible Sensors

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.

Recoverable Dual-Modal Responsive Sensing Materials Based on Mechanoluminescence and Thermally Stimulated Luminescence toward Noncontact Tactile Sensors

Tactile sensing with stress and temperature sensing as core elements have shown promising prospects in intelligent robots and the human-machine interface. Mechanoluminescence (ML)-based stress sensing can realize the direct sensing of mechanical stimulation, whereas indirect temperature sensing based on luminescent sensing materials usually requires the stimulation of extra light or force. Herein, a trap-controlled material Sr₂MgAl₂₂O₃₆:Mn²⁺ with bifunctional mechano/thermal sensing applications was developed and investigated in detail. Visualized bright green-emitting ML and thermally stimulated luminescence (TSL) directly and rapidly responded to mechano/thermal dual stimulation in the Sr₂MgAl₂₂O₃₆:Mn²⁺/PDMS composite film. It is worth mentioning that this study proposed a new idea of direct temperature sensing by the initial intensity of TSL due to thermal-photo energy conversion, unlike previous temperature sensor technology. Based on this, we designed a flexible optical skin with a simple structure and verified its application prospect as a tactile sensing material with dual mechano/thermal response, establishing a unique imaging mode and providing a convenient, reliable, and sensitive way to remotely visualize the distribution of stress and temperature. This study paves a new way for the development of optical skins with simple structures and sensitive visibility in the application of intelligent robot tactile sensing.

Smart Mechanoluminescent Phosphors: A Review of Strontium-Aluminate-Based Materials, Properties, and Their Advanced Application Technologies

Mechanoluminescence, a smart luminescence phenomenon in which light energy is directly produced by a mechanical force, has recently received significant attention because of its important applications in fields such as visible strain sensing and structural health monitoring. Up to present, hundreds of inorganic and organic mechanoluminescent smart materials have been discovered and studied. Among them, strontium-aluminate-based materials are an important class of inorganic mechanoluminescent materials for fundamental research and practical applications attributed to their extremely low force/pressure threshold of mechanoluminescence, efficient photoluminescence, persistent afterglow, and a relatively low synthesis cost. This paper presents a systematic and comprehensive review of strontium-aluminate-based luminescent materials' mechanoluminescence phenomena, mechanisms, material synthesis techniques, and related applications. Besides of summarizing the early and the latest research on this material system, an outlook is provided on its environmental, energy issue and future applications in smart wearable devices, advanced energy-saving lighting and displays.

Mechanoluminescence ratiometric thermometry via MgF2:Tb3

Mechanoluminescent materials have attracted considerable attention over the past two decades, owing to the ability to convert external mechanical stimuli into useful photons. Here we present a new, to the best of our knowledge, type of mechanoluminescent material, i.e., MgF₂:Tb³⁺. In addition to the demonstration of traditional applications, such as stress sensing, we show the possibility of ratiometric thermometry using this mechanoluminescent material. Under stimulation of an external force, rather than the conventional photoexcitation, the luminescence ratio of ⁵D₃→⁷F₆ to ⁵D₄→⁷F₅ emission lines of Tb³⁺ is confirmed to be a good indicator of temperature. Our work not only expands the family of mechanoluminescent materials, but also provides a new and energy-saving route for temperature sensing.