Nature-Inspired Design of Molybdenum-Selenium Dual-Single-Atom Electrocatalysts for CO2 Reduction

Single-atom catalysts confined in shell layer achieved by a modified top-down strategy for efficient CO2 reduction

High-temperature pyrolysis is a primary method for synthesizing single-atom catalysts (SACs). However, this method accelerates the migration of metal atoms within the solid support, leading to low atom utilization. Herein, we report a novel top-down synthesis strategy wherein surface-sintered nickel sulfide (NiS2) nanoparticles (NPs) are in situ atomized into single atoms, achieving confinement of the single-atom catalyst within the shell layer and synthesizing a high-performance single-atom catalyst. Systematic investigations indicate that driven by strong interactions between metal atoms and the support, the NiS2 NPs on the surface of the support atomize into single Ni atoms, which are predominantly distributed on the support surface, thus enhancing the accessibility of the active sites. Furthermore, theoretical calculations indicate that introducing S atoms into the second coordination shell around Ni atoms significantly reduces the activation energy of the CO2 reduction reaction, thereby enhancing the catalytic performance of the single-atom catalyst. In the flow cell, the Ni single-atom catalyst achieving nearly 100% Faradaic efficiency for CO (FECO) over a wide potential range of -0.5 to -1.3 V versus reversible hydrogen electrode (vs. RHE). At -1.6 V vs. RHE, the partial current density for CO reaches a maximum of 709 mA cm-2 (turnover frequency of 28.67 s-1) with a FECO of 95.9%.

Main-Group Nonmetal Single-Selenium-Atom Electrocatalysts for Alkaline Hydrogen Evolution

Herein, we report a scalable strategy to fabricate nitrogen-doped carbon containing nonmetal selenium (Se) single atoms (SAs), termed Se SA/NC, by hydrogen bonding and subsequent calcination. The Se SA/NC loading 3.2 wt % Se SAs displays the best electrocatalytic activity, as well as excellent stability for alkaline hydrogen evolution reaction (HER), which is superior or at least comparable to the reported noble metal-based electrocatalysts. The experimental and theoretical studies reveal that the Se SAs at a lower loading can largely lower the reaction barrier for remarkably enhanced alkaline HER. This research provides a feasible strategy for designing high-performance nonmetal SAs for HER.

Inter-Site Distance Effect in Electrocatalysis

The inter-site distance effect (ISDE) has gained significant attention in heterogeneous catalysis, challenging classical models that treat adjacent nonbonded sites as isolated. Recent studies demonstrate that these sites can exhibit long-range cooperative interactions, enhancing reaction efficiencies. Fully leveraging the ISDE to overcome limitations in site reactivity requires a multidisciplinary approach and advanced techniques. This review provides a comprehensive overview of ISDE in electrocatalysis, starting with strategies for synthesizing materials with tunable inter-site distances. It examines ISDE across various catalyst models, including monometallic and heteronuclear atomic sites, active sites within clusters, and the lattice of nanocatalysts, focusing on their electronic structures, spatial geometries, and synergistic interactions. Advanced characterization and computational methods are highlighted as essential for identifying inter-site structures and distances, providing a systematic framework for understanding ISDE's role in electrocatalysis. The review also proposes best practices for studying ISDE, addressing current challenges and offering future perspectives. These insights aim to inform the design of highly efficient catalysts, enhance the understanding of catalytic mechanisms, and contribute to the development of more efficient energy conversion technologies, providing a foundation for further research into optimizing electrocatalysts.

Promoting Hydrogen Transfer in Electrochemical CO2 Reduction via a Hydrogen on Demand Pathway

The proceeding of electrochemical CO2 reduction reaction (CO2RR) requires the formation of active hydrogen species for CO2 protonation, while traditional catalysts fail to balance the rate of hydrogen supply and CO2 protonation. Herein, we propose a "hydrogen on demand" mechanism, in which the polarity of the adsorbed CO2 is enhanced to allow the capture of hydrogen from water without forming free hydrogen species, realizing the matching rate of hydrogen supply and CO2 protonation. As a proof of concept, we construct Zn-N sites modified by Se atoms, allowing the proceeding of CO2RR under the "hydrogen on demand" mechanism with superior efficiency. The catalyst achieves an industrial CO current of -539.7 mA cm-2, faradaic efficiencies of CO >90 % over a broad window from -0.5 to -1.1 V vs. reversible hydrogen electrode and a high turnover frequency of 7.6×104 h-1 in flow cell. In situ characterization and theoretical calculations reveal that the introduced Se sites enhance the electron localization around the Zn sites, thus increasing the polarity of adsorbed CO2 - with improved ability to acquire hydrogen species from water to facilitate the protonation process.

Clarifying the Active Structure and Reaction Mechanism of Atomically Dispersed Metal and Nonmetal Sites with Enhanced Activity for Oxygen Reduction Reaction

Atomically dispersed transition metal (ADTM) catalysts are widely implemented in energy conversion reactions, while the similar properties of TMs make it difficult to continuously improve the activity of ADTMs via tuning the composition of metals. Introducing nonmetal sites into ADTMs may help to effectively modulate the electronic structure of metals and significantly improve the activity. However, it is difficult to achieve the co-existence of ADTMs with nonmetal atoms and clarify their synergistic effect on the catalytic mechanism. Therefore, elucidating the active sites within atomically dispersed metal-nonmetal materials and unveiling catalytic mechanism is highly important. Herein, a novel hybrid catalyst, with coexistence of Co single-atoms and Co─Se dual-atom sites (Co─Se/Co/NC), is successfully synthesized and exhibits remarkable performance for oxygen reduction reaction (ORR). Theoretical results demonstrate that the Se sites can effectively modulate the charge redistribution at Co active sites. Furthermore, the synergistic effect between Co single-atom sites and Co─Se dual-atom sites can further adjust the d-band center, optimize the adsorption/desorption behavior of intermediates, and finally accelerate the ORR kinetics. This work has clearly clarified the reaction mechanism and shows the great potential of atomically dispersed metal-nonmetal nanomaterials for energy conversion and storage applications.

Precisely designing asymmetrical selenium-based dual-atom sites for efficient oxygen reduction

Owing to their synergistic interactions, dual-atom catalysts (DACs) with well-defined active sites are attracting increasing attention. However, more experimental research and theoretical investigations are needed to further construct explicit dual-atom sites and understand the synergy that facilitates multistep catalytic reactions. Herein, we precisely design a series of asymmetric selenium-based dual-atom catalysts that comprise heteronuclear SeN2-MN2 (M = Fe, Mn, Co, Ni, Cu, Mo, etc.) active sites for the efficient oxygen reduction reaction (ORR). Spectroscopic characterisation and theoretical calculations revealed that heteronuclear selenium atoms can efficiently polarise the charge distribution of other metal atoms through short-range regulation. In addition, compared with the Se or Fe single-atom sites, the SeFe dual-atom sites facilitate a reduction in the conversion energy barrier from *O to *OH via the coadsorption of *O intermediates. Among these designed selenium-based dual-atom catalysts, selenium-iron dual-atom catalysts achieves superior alkaline ORR performance, with a half-wave potential of 0.926 V vs. a reversible hydrogen electrode. In addition, the SeN2-FeN2-based Zn-air battery has a high specific capacity (764.8 mAh g-1) and a maximum power density (287.2 mW cm-2). This work may provide a good perspective for designing heteronuclear DACs to improve ORR efficiency.

Strategies for Achieving Carbon Neutrality: Dual-Atom Catalysts in Focus

Carbon neutrality is a fundamental strategy for achieving the sustainable development of human society. Catalyzing CO2 reduction into various high-value-added fuels serves as an effective pathway to achieve this strategic objective. Atom-dispersed catalysts have received extensive attention due to their maximum atomic utilization, high catalytic selectivity, and exceptional catalytic performance. Dual-atom catalysts (DACs), as an extension of single-atom catalysts (SACs), not only retain the advantages of SACs, but also produce many new properties. This review initiates its exploration by elucidating the mechanism of CO2 reduction reaction (CO2RR) from CO2 adsorption and CO2 activation. Then, a comprehensive summary of recently developed preparation methods of DACs is presented. Importantly, the mechanisms underlying the promoted catalytic performance of DACs in comparison to SACs are subjected to a comprehensive analysis from adjustable adsorption capacity, tunable electronic structure, strong synergistic effect, and enhanced spacing effect, elucidating their respective superiorities in CO2RR. Subsequently, the application of DACs in CO2RR is discussed in detail. Conclusively, the prospective trajectories and inherent challenges of CO2RR are expounded upon concerning the continued advancement of DACs. This thorough review not only enhances the comprehension of DACs within CO2RR but also accentuates the prospective developments in the design of sophisticated catalytic materials.

Hydrogen radical-boosted electrocatalytic CO2 reduction using Ni-partnered heteroatomic pairs

The electrocatalytic reduction of CO2 to CO is slowed by the energy cost of the hydrogenation step that yields adsorbed *COOH intermediate. Here, we report a hydrogen radical (H•)-transfer mechanism that aids this hydrogenation step, enabled by constructing Ni-partnered hetero-diatomic pairs, and thereby greatly enhancing CO2-to-CO conversion kinetics. The partner metal to the Ni (denoted as M) catalyzes the Volmer step of the water/proton reduction to generate adsorbed *H, turning to H•, which reduces CO2 to carboxyl radicals (•COOH). The Ni partner then subsequently adsorbs the •COOH in an exothermic reaction, negating the usual high energy-penalty for the electrochemical hydrogenation of CO2. Tuning the H adsorption strength of the M site (with Cd, Pt, or Pd) allows for the optimization of H• formation, culminating in a markedly improved CO2 reduction rate toward CO production, offering 97.1% faradaic efficiency (FE) in aqueous electrolyte and up to 100.0% FE in an ionic liquid solution.

Dual Fe/I Single-Atom Electrocatalyst for High-Performance Oxygen Reduction and Wide-Temperature Quasi-Solid-State Zn-Air Batteries

Oxygen reduction reaction (ORR) electrocatalysts are essential for widespread application of quasi-solid-state Zn-air batteries (ZABs), but the well-known Fe-N-C single-atom catalysts (SACs) suffer from low activity and stability because of unfavorable strong adsorption of oxygenated intermediates. Herein, the study synthesizes dual Fe/I single atoms anchored on N-doped carbon nanorods (Fe/I-N-CR) via a metal-organic framework (MOF)-mediated two-step tandem-pyrolysis method. Atomic-level I doping modulates the electronic structure of Fe-Nx centers via the long-range electron delocalization effect. Benefitting from the synergistic effect of dual Fe/I single-atom sites and the structural merits of 1D nanorods, the Fe/I-N-CR catalyst shows excellent ORR activity and stability, superior to Pt/C and Fe or I SACs. When the Fe/I-N-CR is employed as cathode for quasi-solid-state ZABs, a high power density of 197.9 mW cm-2 and an ultralong cycling lifespan of 280 h at 20 mA cm-2 are both achieved, greatly exceeding those of commercial Pt/C+IrO2 (119.1 mW cm-2 and 47 h). In addition, wide-temperature adaptability and superior stability from -40 to 60 °C are realized for the Fe/I-N-CR-based quasi-solid-state ZABs. This work provides a MOF-mediated two-step tandem-pyrolysis strategy to engineer high-performance dual SACs with metal/nonmetal centers for ORR and sustainable ZABs.

Selenic Acid Etching Assisted Atomic Engineering for Designing Metal-Semimetal Dual Single-Atom Catalysts for Enhanced CO2 Electroreduction

Single-atom catalysts are promising for electrocatalytic CO2 conversion but face challenges in controllable syntheses. Herein, a facile selenic acid etching-assisted strategy has been developed to fabricate a hybrid metal-semimetal dual single-atom catalyst for electrocatalytic CO2 reduction. This strategy enables the simultaneous generation of monodisperse active sites and hierarchical morphologies with hollow nanostructures. The as-obtained catalyst with Fe-Se dual single-atom sites supported by porous nitrogen-doped carbon (FeSe-NC) shows exceptional catalytic activity and CO selectivity, delivering a Faradaic efficiency (FE) of >97% with industrially comparable jCO, superior to the Fe single-atom catalyst. Moreover, the FeSe-NC-based rechargeable Zn-CO2 battery delivers a high power density (2.01 mW cm-2) and outstanding FECO (>90%), as well as excellent cycling stability. Experimental results together with theoretical calculations reveal that the etching-induced defects and the Se-modulated Fe centers with asymmetrical polarized charge distributions synergistically facilitate the key intermediate *CO desorption and thus accelerate the CO2-to-CO conversion.

Asymmetric Microenvironment Tailoring Strategies of Atomically Dispersed Dual-Site Catalysts for Oxygen Reduction and CO2 Reduction Reactions

Dual-atom catalysts (DACs) with atomically dispersed dual-sites, as an extension of single-atom catalysts (SACs), have recently become a new hot topic in heterogeneous catalysis due to their maximized atom efficiency and dual-site diverse synergy, because the synergistic diversity of dual-sites achieved by asymmetric microenvironment tailoring can efficiently boost the catalytic activity by optimizing the electronic structure of DACs. Here, this work first summarizes the frequently-used experimental synthesis and characterization methods of DACs. Then, four synergistic catalytic mechanisms (cascade mechanism, assistance mechanism, co-adsorption mechanism and bifunction mechanism) and four key modulating methods (active site asymmetric strategy, transverse/axial-modification engineering, distance engineering and strain engineering) are elaborated comprehensively. The emphasis is placed on the effects of asymmetric microenvironment of DACs on oxygen/carbon dioxide reduction reaction. Finally, some perspectives and outlooks are also addressed. In short, the review summarizes a useful asymmetric microenvironment tailoring strategy to speed up synthesis of high-performance electrocatalysts for different reactions.

Regulating the Critical Intermediates of Dual-Atom Catalysts for CO2 Electroreduction

Electrocatalysis is a very attractive way to achieve a sustainable carbon cycle by converting CO2 into organic fuels and feedstocks. Therefore, it is crucial to design advanced electrocatalysts by understanding the reaction mechanism of electrochemical CO2 reduction reaction (eCO2RR) with multiple electron transfers. Among electrocatalysts, dual-atom catalysts (DACs) are promising candidates due to their distinct electronic structures and extremely high atomic utilization efficiency. Herein, the eCO2RR mechanism and the identification of intermediates using advanced characterization techniques, with a particular focus on regulating the critical intermediates are systematically summarized. Further, the insightful understanding of the functionality of DACs originates from the variable metrics of electronic structures including orbital structure, charge distribution, and electron spin state, which influences the active sites and critical intermediates in eCO2RR processes. Based on the intrinsic relationship between variable metrics and critical intermediates, the optimized strategies of DACs are summarized containing the participation of synergistic atoms, engineering of the atomic coordination environment, regulation of the diversity of central metal atoms, and modulation of metal-support interaction. Finally, the challenges and future opportunities of atomically dispersed catalysts for eCO2RR processes are discussed.

Recent progress in electrochemical C-N coupling: metal catalyst strategies and applications

Electrochemical C-N coupling reactions hold significant importance in the fields of organic chemistry and green chemistry. Conventional methods for constructing C-N bonds typically rely on high temperatures, high pressures, and other conditions that are energy-intensive and prone to generating environmental pollutants. In contrast, the electrochemical approaches employ electrical energy as the driving force to achieve C-N bond formation under ambient conditions, representing a more environment-friendly and sustainable alternative. The notable advantages of electrochemical C-N coupling include high efficiency, good selectivity, and mild reaction conditions. Through rational design of corresponding electrocatalysts, it is possible to achieve efficient C-N bond coupling at low potentials. Moreover, the electrochemical methods allow for precise control over reaction conditions, thereby avoiding side reactions and by-products that are common for conventional methods, improving both selectivity and product purity. Despite the extensive research efforts devoted to exploring the potential of electrochemical C-N coupling, the design of efficient and stable metal catalysts remains a significant challenge. In this review, we summarize and evaluate the latest strategies developed for designing metal catalysts, and their application prospects for different nitrogen sources such as N2 and NOx. We delineate how the control over nanoscale structures, morphologies, and electronic properties of metal catalysts can optimize their performance in C-N coupling reactions, and discuss the performances and advantages of single-metal catalysts, bimetallic catalysts, and single-atom catalysts under various reaction conditions. By summarizing the latest research achievements, particularly in the development of high-efficiency catalysts, the application of novel catalyst materials, and the in-depth study of reaction mechanisms, this review aims to provide insights for future research in the field of electrochemical C-N coupling, and demonstrates that rationally designed metal catalysts could not only enhance the efficiency and selectivity of electrochemical C-N coupling reactions, but also offer conceptual frameworks for other electrochemical reactions.

Selective Synthesis of Organonitrogen Compounds via Electrochemical C-N Coupling on Atomically Dispersed Catalysts

The C-N coupling reaction demonstrates broad application in the fabrication of a wide range of high value-added organonitrogen molecules including fertilizers (e.g., urea), chemical feedstocks (e.g., amines, amides), and biomolecules (e.g., amino acids). The electrocatalytic C-N coupling pathways from waste resources like CO2, NO3-, or NO2- under mild conditions offer sustainable alternatives to the energy-intensive thermochemical processes. However, the complex multistep reaction routes and competing side reactions lead to significant challenges regarding low yield and poor selectivity toward large-scale practical production of target molecules. Among diverse catalyst systems that have been developed for electrochemical C-N coupling reactions, the atomically dispersed catalysts with well-defined active sites provide an ideal model platform for fundamental mechanism elucidation. More importantly, the intersite synergy between the active sites permits the enhanced reaction efficiency and selectivity toward target products. In this Review, we systematically assess the dominant reaction pathways of electrocatalytic C-N coupling reactions toward various products including urea, amines, amides, amino acids, and oximes. To guide the rational design of atomically dispersed catalysts, we identify four key stages in the overall reaction process and critically discuss the corresponding catalyst design principles, namely, retaining NOx/COx reactants on the catalyst surface, regulating the evolution pathway of N-/C- intermediates, promoting C-N coupling, and facilitating final hydrogenation steps. In addition, the advanced and effective theoretical simulation and characterization technologies are discussed. Finally, a series of remaining challenges and valuable future prospects are presented to advance rational catalyst design toward selective electrocatalytic synthesis of organonitrogen molecules.

Atomic Molybdenum Nanomaterials for Electrocatalysis

As a sustainable energy technology, electrocatalytic energy conversion requires electrocatalysts, which greatly motivates the exploitation of high-performance electrocatalysts based on nonprecious metals. Molybdenum-based nanomaterials have demonstrated promise as electrocatalysts because of their unique physiochemical and electronic properties. Among them, atomic Mo catalysts, also called Mo-based single-atom catalysts (Mo-SACs), have the most accessible active sites and tunable microenvironments and are thrivingly explored in various electrochemical conversion reactions. A timely review of such rapidly developing topics is necessary to provide guidance for further exploration of optimized Mo-SACs toward electrochemical energy technologies. In this review, recent advances in the synthetic strategies for Mo-SACs are highlighted, focusing on the microenvironment engineering of Mo atoms. Then, the representative achievements of their applications in various electrocatalytic reactions involving the N2, H2O, and CO2 cycles are summarized by combining experimental and computational results. Finally, prospects for the future development of Mo-SACs in electrocatalysis are provided and the key challenges that require further investigation and optimization are highlighted.

Metal-Organic Frameworks for Electrocatalytic CO2 Reduction: From Catalytic Site Design to Microenvironment Modulation

The electrochemical reduction of CO2 to high-value carbon-based chemicals provides a sustainable approach to achieving an artificial carbon cycle. In the decade, metal-organic frameworks (MOFs), a kind of porous crystalline porous materials featuring well-defined structures, large surface area, high porosity, diverse components, easy tailorability, and controllable morphology, have attracted considerable research attention, serving as electrocatalysts to drive CO2 reduction. In this review, the reaction mechanisms of electrochemical CO2 reduction and the structure/component advantages of MOFs meeting the requirements of electrocatalysts for CO2 reduction are analyzed. After that, the representative progress for the precise fabrication of MOF-based electrocatalysts for CO2 reduction, focusing on catalytic site design and microenvironment modulation, are systemically summarized. Furthermore, the emerging applications and promising research for more practical scenarios related to electrochemical CO2 conversion are specifically proposed. Finally, the remaining challenges and future outlook of MOFs for electrochemical CO2 reduction are further discussed.

Enhanced Electrochemical CO2 Reduction to Formate over Phosphate-Modified In: Water Activation and Active Site Tuning

Electrochemical CO2 reduction reaction (CO2RR) offers a sustainable strategy for producing fuels and chemicals. However, it suffers from sluggish CO2 activation and slow water dissociation. In this work, we construct a (P-O)δ- modified In catalyst that exhibits high activity and selectivity in electrochemical CO2 reduction to formate. A combination of in situ characterizations and kinetic analyses indicate that (P-O)δ- has a strong interaction with K+(H2O)n, which effectively accelerates water dissociation to provide protons. In situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) measurements together with density functional theory (DFT) calculations disclose that (P-O)δ- modification leads to a higher valence state of In active site, thus promoting CO2 activation and HCOO* formation, while inhibiting competitive hydrogen evolution reaction (HER). As a result, the (P-O)δ- modified oxide-derived In catalyst exhibits excellent formate selectivity across a broad potential window with a formate Faradaic efficiency as high as 92.1 % at a partial current density of ~200 mA cm-2 and a cathodic potential of -1.2 V vs. RHE in an alkaline electrolyte.

Customizing catalyst surface/interface structures for electrochemical CO2 reduction

Electrochemical CO2 reduction reaction (CO2RR) provides a promising route to converting CO2 into value-added chemicals and to neutralizing the greenhouse gas emission. For the industrial application of CO2RR, high-performance electrocatalysts featuring high activities and selectivities are essential. It has been demonstrated that customizing the catalyst surface/interface structures allows for high-precision control over the microenvironment for catalysis as well as the adsorption/desorption behaviors of key reaction intermediates in CO2RR, thereby elevating the activity, selectivity and stability of the electrocatalysts. In this paper, we review the progress in customizing the surface/interface structures for CO2RR electrocatalysts (including atomic-site catalysts, metal catalysts, and metal/oxide catalysts). From the perspectives of coordination engineering, atomic interface design, surface modification, and hetero-interface construction, we delineate the resulting specific alterations in surface/interface structures, and their effect on the CO2RR process. At the end of this review, we present a brief discussion and outlook on the current challenges and future directions for achieving high-efficiency CO2RR via surface/interface engineering.

Modulating the Structure and Composition of Single-Atom Electrocatalysts for CO2 reduction

Electrochemical CO2 reduction reaction (eCO2 RR) is a promising strategy to achieve carbon cycling by converting CO2 into value-added products under mild reaction conditions. Recently, single-atom catalysts (SACs) have shown enormous potential in eCO2 RR due to their high utilization of metal atoms and flexible coordination structures. In this work, the recent progress in SACs for eCO2 RR is outlined, with detailed discussions on the interaction between active sites and CO2 , especially the adsorption/activation behavior of CO2 and the effects of the electronic structure of SACs on eCO2 RR. Three perspectives form the starting point: 1) Important factors of SACs for eCO2 RR; 2) Typical SACs for eCO2 RR; 3) eCO2 RR toward valuable products. First, how different modification strategies can change the electronic structure of SACs to improve catalytic performance is discussed; Second, SACs with diverse supports and how supports assist active sites to undergo catalytic reaction are introduced; Finally, according to various valuable products from eCO2 RR, the reaction mechanism and measures which can be taken to improve the selectivity of eCO2 RR are discussed. Hopefully, this work can provide a comprehensive understanding of SACs for eCO2 RR and spark innovative design and modification ideas to develop highly efficient SACs for CO2 conversion to various valuable fuels/chemicals.

Water-Mediated Selectivity Control of CH3 OH versus CO/CH4 in CO2 Photoreduction on Single-Atom Implanted Nanotube Arrays

Controllable methanol production in artificial photosynthesis is highly desirable due to its high energy density and ease of storage. Herein, single atom Fe is implanted into TiO2 /SrTiO3 (TSr) nanotube arrays by two-step anodization and Sr-induced crystallization. The resulting Fe-TSr with both single Fe reduction centers and dominant oxidation facets (001) contributes to efficient CO2 photoreduction and water oxidation for controlled production of CH3 OH and CO/CH4 . The methanol yield can reach to 154.20 µmol gcat -1 h-1 with 98.90% selectivity by immersing all the catalyst in pure water, and the yield of CO/CH4 is 147.48 µmol gcat -1 h-1 with >99.99% selectivity when the catalyst completely outside water. This CH3 OH yield is 50 and 3 times higher than that of TiO2 and TSr and stands among all the state-of-the-art catalysts. The facile gas-solid and gas-liquid-solid phase switch can selectively control CH3 OH production from ≈0% (above H2 O) to 98.90% (in H2 O) via slowly immersing the catalyst into water, where abundant •OH and H2 O around Fe sites play important role in selective CH3 OH production. This work highlights a new insight for water-mediated CO2 photoreduction to controllably produce CH3 OH.

Dual-axial engineering on atomically dispersed catalysts for ultrastable oxygen reduction in acidic and alkaline solutions

Atomically dispersed catalysts are a promising alternative to platinum group metal catalysts for catalyzing the oxygen reduction reaction (ORR), while limited durability during the electrocatalytic process severely restricts their practical application. Here, we report an atomically dispersed Co-doped carbon-nitrogen bilayer catalyst with unique dual-axial Co-C bonds (denoted as Co/DACN) by a smart phenyl-carbon-induced strategy, realizing highly efficient electrocatalytic ORR in both alkaline and acidic media. The corresponding half-wave potential for ORR is up to 0.85 and 0.77 V (vs. reversible hydrogen electrode (RHE)) in 0.5 M H2SO4 and 0.1 M KOH, respectively, representing the best ORR activity among all non-noble metal catalysts reported to date. Impressively, the Zn-air battery (ZAB) equipped with Co/DACN cathode achieves outstanding durability after 1,688 h operation at 10 mA cm-2 with a high current density (154.2 mA cm-2) and a peak power density (210.1 mW cm-2). Density functional theory calculations reveal that the unique dual-axial cross-linking Co-C bonds of Co/DACN significantly enhance the stability during ORR and also facilitate the 4e- ORR pathway by forming a joint electron pool due to the improved interlayer electron mobility. We believe that axial engineering opens a broad avenue to develop high-performance heterogeneous electrocatalysts for advanced energy conversion and storage.

Bioinspired Tandem Electrode for Selective Electrocatalytic Synthesis of Ammonia from Aqueous Nitrate

The electrocatalytic nitrate reduction reaction (NO3RR) has recently emerged as a promising technique for readily converting aqueous nitrate (NO3-) pollutants into valuable ammonia (NH3). It is vital to thoroughly understand the mechanism of the reaction to rationally design and construct advanced electrocatalytic systems that can effectively and selectively drive the NO3RR. There are several natural enzymes that incorporate molybdenum (Mo) and that can activate NO3-. Based on this, a cadmium (Cd) single-atom anchored Mo2TiC2Tx electrocatalyst (referred to as CdSA-Mo2TiC2Tx) through the NO3RR to generate NH3 was rationally designed and demonstrated. In an H-type electrolysis cell and at a current density of 42.5 mA cm-2, the electrocatalyst had a Faradaic efficiency of >95% and an impressive NH3 yield rate of 48.5 mg h-1 cm-2. Moreover, the conversion of NO3- to NH3 on the CdSA-Mo2TiC2Tx surface was further revealed by operando attenuated total reflection Fourier-transform infrared spectroscopy and an electrochemical differential mass spectrometer. The electrocatalyst significantly outperformed Mo2TiC2Tx as well as reported state-of-the-art catalysts. Density functional theory calculations revealed that CdSA-Mo2TiC2Tx decreased the ability of the d-p orbital to hybridize with NH3* intermediates, thereby decreasing the activation energy of the potential-determining step. This work not only highlights the application prospects of heavy metal single-atom catalysts in the NO3RR but also provides examples of bio-inspired electrocatalysts for the synthesis of NH3.

Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)

This topical review focuses on the distinct role of carbon support coordination environment of single-atom catalysts (SACs) for electrocatalysis. The article begins with an overview of atomic coordination configurations in SACs, including a discussion of the advanced characterization techniques and simulation used for understanding the active sites. A summary of key electrocatalysis applications is then provided. These processes are oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO2 RR). The review then shifts to modulation of the metal atom-carbon coordination environments, focusing on nitrogen and other non-metal coordination through modulation at the first coordination shell and modulation in the second and higher coordination shells. Representative case studies are provided, starting with the classic four-nitrogen-coordinated single metal atom (MN4 ) based SACs. Bimetallic coordination models including homo-paired and hetero-paired active sites are also discussed, being categorized as emerging approaches. The theme of the discussions is the correlation between synthesis methods for selective doping, the carbon structure-electron configuration changes associated with the doping, the analytical techniques used to ascertain these changes, and the resultant electrocatalysis performance. Critical unanswered questions as well as promising underexplored research directions are identified.

Two-way rushing travel: Cathodic-anodic coupling of Bi2O3-SnO@CuO nanowires, a bifunctional catalyst with excellent CO2RR and MOR performance for the efficient production of formate

Electrocatalytic carbon dioxide reduction reaction (CO2RR) generates high value-added products and simultaneously reduces excess atmospheric CO2 concentrations, is regarded as a potential approach to achieve carbon neutrality. However, the kinetic process of the anode oxygen evolution reaction (OER) is slow, resulting in a poor electrochemical efficiency of CO2RR. It is a breakthrough to replace OER with methanol oxidation reaction (MOR), which has more advantageous reaction kinetics. Herein, this work proposed a bifunctional catalyst Bi2O3-SnO modified CuO nanowires (Bi2O3-SnO@CuO NWs) with excellent CO2RR and MOR performance. For CO2RR, Bi2O3-SnO@CuO NWs achieved more than 90% formate selectivity at wide potential windows from -0.88 to -1.08 V (vs. reversible hydrogen electrode (RHE)), peaking at 96.6%. Meanwhile, anodic Bi2O3-SnO@CuO NWs achieved 100 mA cm-2 at a low potential of 1.53 V (vs. RHE), possessing nearly 100% formate selectivity ranging from 1.6 to 1.8 V (vs. RHE). Impressively, by coupling cathodic CO2RR and anodic MOR, the integrated electrolytic cell realized co-production of formate (cathode: 94.7% and anode: 97.5%), minimizing the energy input by approximately 69%, compared with CO2RR. This work provided a meaningful perspective for the design of bifunctional catalysts and coupling reaction systems in CO2RR.

A Bismuth-Based Zeolitic Organic Framework with Coordination-Linked Metal Cages for Efficient Electrocatalytic CO2 Reduction to HCOOH

Zeolitic metal-organic frameworks (ZMOFs) have emerged as one of the most promsing catalysts for energy conversion, but they suffer from either weak bonding between metal-organic cubes (MOCs) that decrease their stability during catalysis processes or low activity due to inadequate active sites. In this work, through ligand-directing strategy, we successfully obtain an unprecedented bismuth-based ZMOF (Bi-ZMOF) featuring a ACO topological crystal structure with strong coordination bonding between the Bi-based cages. As a result, it enables efficient reduction of CO2 to formic acid (HCOOH) with Faradaic efficiency as high as 91 %. A combination of in situ surface-enhanced infrared absorption spectroscopy and density functional theory calculation reveals that the Bi-N coordination contributes to facilitating charge transfer from N to Bi atoms, which stabilize the intermediate to boost the reduction efficiency of CO2 to HCOOH. This finding highlights the importance of the coordination environment of metal active sites on electrocatalytic CO2 reduction. We believe that this work will offer a new clue to rationally design zeolitic MOFs for catalytic reaction.

Intermediates Regulation via Electron-Deficient Cu Sites for Selective Nitrate-to-Ammonia Electroreduction

Ammonia (NH3 ), known as one of the fundamental raw materials for manufacturing commodities such as chemical fertilizers, dyes, ammunitions, pharmaceuticals, and textiles, exhibits a high hydrogen storage capacity of ≈17.75%. Electrochemical nitrate reduction (NO3 RR) to valuable ammonia at ambient conditions is a promising strategy to facilitate the artificial nitrogen cycle. Herein, copper-doped cobalt selenide nanosheets with selenium vacancies are reported as a robust and highly efficient electrocatalyst for the reduction of nitrate to ammonia, exhibiting a maximum Faradaic efficiency of ≈93.5% and an ammonia yield rate of 2360 µg h-1 cm-2 at -0.60 V versus reversible hydrogen electrode. The in situ spectroscopical and theoretical study demonstrates that the incorporation of Cu dopants and Se vacancies into cobalt selenide efficiently enhances the electron transfer from Cu to Co atoms via the bridging Se atoms, forming the electron-deficient structure at Cu sites to accelerate NO3 - dissociation and stabilize the *NO2 intermediates, eventually achieving selective catalysis in the entire NO3 RR process to produce ammonia efficiently.

Inter-Metal Interaction of Dual-Atom Catalysts in Heterogeneous Catalysis

Dual-atom catalysts (DACs) have been a new frontier in heterogeneous catalysis due to their unique intrinsic properties. The synergy between dual atoms provides flexible active sites, promising to enhance performance and even catalyze more complex reactions. However, precisely regulating active site structure and uncovering dual-atom metal interaction remain grand challenges. In this review, we clarify the significance of the inter-metal interaction of DACs based on the understanding of active center structures. Three diatomic configurations are elaborated, including isolated dual single-atom, N/O-bridged dual-atom, and direct dual-metal bonding interaction. Subsequently, the up-to-date progress in heterogeneous oxidation reactions, hydrogenation/dehydrogenation reactions, electrocatalytic reactions, and photocatalytic reactions are summarized. The structure-activity relationship between DACs and catalytic performance is then discussed at an atomic level. Finally, the challenges and future directions to engineer the structure of DACs are discussed. This review will offer new prospects for the rational design of efficient DACs toward heterogeneous catalysis.

Dual-Active-Sites Single-Atom Catalysts for Advanced Applications

Dual-Active-Sites Single-Atom catalysts (DASs SACs) are not only the improvement of SACs but also the expansion of dual-atom catalysts. The DASs SACs contains dual active sites, one of which is a single atomic active site, and the other active site can be a single atom or other type of active site, endowing DASs SACs with excellent catalytic performance and a wide range of applications. The DASs SACs are categorized into seven types, including the neighboring mono metallic DASs SACs, bonded DASs SACs, non-bonded DASs SACs, bridged DASs SACs, asymmetric DASs SACs, metal and nonmetal combined DASs SACs and space separated DASs SACs. Based on the above classification, the general methods for the preparation of DASs SACs are comprehensively described, especially their structural characteristics are discussed in detail. Meanwhile, the in-depth assessments of DASs SACs for variety applications including electrocatalysis, thermocatalysis and photocatalysis are provided, as well as their unique catalytic mechanism are addressed. Moreover, the prospects and challenges for DASs SACs and related applications are highlighted. The authors believe the great expectations for DASs SACs, and this review will provide novel conceptual and methodological perspectives and exciting opportunities for further development and application of DASs SACs.

High-Rate CO2 Electrolysis to Formic Acid over a Wide Potential Window: An Electrocatalyst Comprised of Indium Nanoparticles on Chitosan-Derived Graphene

Realizing industrial-scale production of HCOOH from the CO2 reduction reaction (CO2 RR) is very important, but the current density as well as the electrochemical potential window are still limited to date. Herein, we achieved this by integration of chemical adsorption and electrocatalytic capabilities for the CO2 RR via anchoring In nanoparticles (NPs) on biomass-derived substrates to create In/X-C (X=N, P, B) bifunctional active centers. The In NPs/chitosan-derived N-doped defective graphene (In/N-dG) catalyst had outstanding performance for the CO2 RR with a nearly 100 % Faradaic efficiency (FE) of HCOOH across a wide potential window. Particularly, at 1.2 A ⋅ cm-2 high current density, the FE of HCOOH was as high as 96.0 %, and the reduction potential was as low as -1.17 V vs RHE. When using a membrane electrode assembly (MEA), a pure HCOOH solution could be obtained at the cathode without further separation and purification. The FE of HCOOH was still up to 93.3 % at 0.52 A ⋅ cm-2 , and the HCOOH production rate could reach 9.051 mmol ⋅ h-1  ⋅ cm-2 . Our results suggested that the defects and multilayer structure in In/N-dG could not only enhance CO2 chemical adsorption capability, but also trigger the formation of an electron-rich catalytic environment around In sites to promote the generation of HCOOH.

Oxalate-Assisted Synthesis of Hollow Carbon Nanocage With Fe Single Atoms for Electrochemical CO2 Reduction

Metal single-atom catalysts are promising in electrochemical CO2 reduction reaction (CO2 RR). The pores and cavities of the supports can promote the exposure of active sites and mass transfer of reactants, hence improve their performance. Here, iron oxalate is added to ZIF-8 and subsequently form hollow carbon nanocages during calcination. The formation mechanism of the hollow structure is studied in depth by controlling variables during synthesis. Kirkendall effect is the main reason for the formation of hollow porous carbon nanocages. The hollow porous carbon nanocages with Fe single atoms exhibit better CO2 RR activity and CO selectivity. The diffusion of CO2 facilitated by the mesoporous structure of carbon nanocage results in their superior activity and selectivity. This work has raised an effective strategy for the synthesis of hollow carbon nanomaterials, and provides a feasible pathway for the rational design of electrocatalysts for small molecule activation.

MXene-Regulated Metal-Oxide Interfaces with Modified Intermediate Configurations Realizing Nearly 100% CO2 Electrocatalytic Conversion

Electrocatalytic CO2 reduction via renewable electricity provides a sustainable way to produce valued chemicals, while it suffers from low activity and selectivity. Herein, we constructed a novel catalyst with unique Ti3 C2 Tx MXene-regulated Ag-ZnO interfaces, undercoordinated surface sites, as well as mesoporous nanostructures. The designed Ag-ZnO/Ti3 C2 Tx catalyst achieves an outstanding CO2 conversion performance of a nearly 100% CO Faraday efficiency with high partial current density of 22.59 mA cm-2 at -0.87 V versus reversible hydrogen electrode. The electronic donation of Ag and up-shifted d-band center relative to Fermi level within MXene-regulated Ag-ZnO interfaces contributes the high selectivity of CO. The CO2 conversion is highly correlated with the dominated linear-bonded CO intermediate confirmed by in situ infrared spectroscopy. This work enlightens the rational design of unique metal-oxide interfaces with the regulation of MXene for high-performance electrocatalysis beyond CO2 reduction.

Engineering Unsymmetrically Coordinated Fe Sites via Heteroatom Pairs Synergetic Contribution for Efficient Oxygen Reduction

Single-atom Fe catalysts are considered as the promising catalysts for oxygen reduction reaction (ORR). However, the high electronegativity of the symmetrical coordination N atoms around Fe site generally results in too strong adsorption of *OOH intermediates on the active site, severely limiting the catalytic performance. Herein, a "heteroatom pair synergetic modulation" strategy is proposed to tailor the coordination environment and spin state of Fe sites, enabling breaking the shackles of unsuitable adsorption of intermediate products on the active centers toward a more efficient ORR pathway. The unsymmetrically Co and B heteroatomic coordinated Fe single sites supported on an N-doped carbon (Fe─B─Co/NC) catalyst perform excellent ORR activity with high half-wave potential (E1/2 ) of 0.891 V and a large kinetic current density (Jk ) of 60.6 mA cm-2 , which is several times better than those of commercial Pt/C catalysts. By virtue of in situ electrochemical impedance and synchrotron infrared spectroscopy, it is observed that the optimized Fe sites can effectively accelerate the evolution of O2 into the *O intermediate, overcoming the sluggish O─O bond cleavage of the *OOH intermediate, which is responsible for fast four-electron reaction kinetics.

Revealing the Kinetic Balance between Proton-Feeding and Hydrogenation in CO2 Electroreduction

Electrocatalytic reduction of CO₂ to high-value-added chemicals provides a feasible path for global carbon balance. Herein, the fabrication of Ni_{NP x} @Ni_{SA y} -NG (x,y = 1, 2, 3; NG = nitrogen-doped graphite) is reported, in which Ni single atom sites (Ni_SA ) and Ni nanoparticles (Ni_NP ) coexist. These Ni_{NP x} @Ni_{SA y} -NG presented a volcano-like trend for maximum CO Faradaic efficiency (FE_CO ) with the highest point at Ni_NP2 @Ni_SA2 -NG in CO₂ RR. Ni_NP2 @Ni_SA2 -NG exhibited ≈98% of maximum FE_CO and a large current density of -264 mA cm^-2 at -0.98 V (vs. RHE) in the flow cell. In situ experiment and density functional theory (DFT) calculations confirmed that the proper content of Ni_SA and Ni_NP balanced kinetic between proton-feeding and CO₂ hydrogenation. The Ni_NP in Ni_NP2 @Ni_SA2 -NG promoted the formation of H* and reduced the energy barrier of *CO₂ hydrogenation to *COOH, and CO desorption can be efficiently facilitated by Ni_SA sites, thereby resulting in enhanced CO₂ RR performance.

Recent advances in the theoretical studies on the electrocatalytic CO2 reduction based on single and double atoms

Excess of carbon dioxide (CO2) in the atmosphere poses a significant threat to the global climate. Therefore, the electrocatalytic carbon dioxide reduction reaction (CO2RR) is important to reduce the burden on the environment and provide possibilities for developing new energy sources. However, highly active and selective catalysts are needed to effectively catalyze product synthesis with high adhesion value. Single-atom catalysts (SACs) and double-atom catalysts (DACs) have attracted much attention in the field of electrocatalysis due to their high activity, strong selectivity, and high atomic utilization. This review summarized the research progress of electrocatalytic CO2RR related to different types of SACs and DACs. The emphasis was laid on the catalytic reaction mechanism of SACs and DACs using the theoretical calculation method. Furthermore, the influences of solvation and electrode potential were studied to simulate the real electrochemical environment to bridge the gap between experiments and computations. Finally, the current challenges and future development prospects were summarized and prospected for CO2RR to lay the foundation for the theoretical research of SACs and DACs in other aspects.

Challenges and Perspectives of Single-Atom-Based Catalysts for Electrochemical Reactions

Single-atom catalysts (SACs) are emerging as the most promising catalysts for various electrochemical reactions. The isolated dispersion of metal atoms enables high density of active sites, and the simplified structure makes them ideal model systems to study the structure-performance relationships. However, the activity of SACs is still insufficient, and the stability of SACs is usually inferior but has received little attention, hindering their practical applications in real devices. Moreover, the catalytic mechanism on a single metal site is unclear, leading the development of SACs to rely on trial-and-error experiments. How can one break the current bottleneck of active sites density? How can one further increase the activity/stability of metal sites? In this Perspective, we discuss the underlying reasons for the current challenges and identify precisely controlled synthesis involving designed precursors and innovative heat-treatment techniques as the key for the development of high-performance SACs. In addition, advanced operando characterizations and theoretical simulations are essential for uncovering the true structure and electrocatalytic mechanism of an active site. Finally, future directions that may arise breakthroughs are discussed.

Rational design of atomic site catalysts for electrochemical CO2 reduction

Renewable-energy-powered electrochemical CO₂ reduction (ECR) is a promising way of transforming CO₂ to value-added products and achieving sustainable carbon recycling. By virtue of the extremely high exposure rate of active sites and excellent catalytic performance, atomic site catalysts (ASCs), including single-atomic site catalysts and diatomic site catalysts, have attracted considerable attention. In this feature article, we focus on the rational design strategies of ASCs developed in recent years for the ECR reaction. The influence of these strategies on the activity and selectivity of ASCs for ECR is further discussed in terms of electronic regulation, synergistic activation, microenvironmental regulation and tandem catalytic system construction. Finally, the challenges and future directions are indicated. We hope that this feature article will be helpful in the development of novel ASCs for ECR.