Propagating Surface Plasmon Polaritons: Towards Applications for Remote-Excitation Surface Catalytic Reactions

Perspective on Tailored Nanostructure-Dominated SPP Effects for SERS

Localized surface plasmon resonance (LSPR) excited by an incident light can normally produce strong surface-enhanced Raman scattering (SERS) at the nanogaps among plasmonic nano-objects (so-called hot spots), which is extensively explored. In contrast, surface plasmon polaritons (SPPs) that can be generated by an incident beam via particular structures with a conservation of wave vectors can excite SERS effects as well. SPPs actually play an indispensable role in high-performance SERS devices but receive much less attention. In this perspective, SPPs and their couplings with LSPR for SERS excitations with differing effectiveness through particular plasmonic/dielectric structures/configurations, along with relevant fabrication approaches, are profoundly reviewed and commented on from a unique perspective from in situ to ex situ excitations of SERS enabled by spatiotemporally separated multiple processes of SPPs. Quantitative design of particular configurations/architectures enabling highly efficient and effective multiple processes of SPPs is particularly emphasized as one giant leap toward ultimate full quantitative design of intrinsically high-performance SERS chips and very critical for their batch manufacturability and applications as well. The viewpoints and prospects about innovative SERS devices based on tailored structure-dominated SPPs effects and their coupling with LSPR are presented and discussed.

Annealing temperature effects on monolayer WS2-veiled Ag nanoparticle array for surface catalytic reaction

Plasmonic-WS2 hybrids have attracted widespread interest for plasmon driven catalytic reactions. In this work, a Ag nanoparticles (NPs)/WS2 hybrid was fabricated by utilizing a one-step anodized Al template-assisted vacuum thermal evaporation technique and wet transfer method. To optimize the catalytic performance, the morphological evolution and corresponding changes in the catalytic properties of the Ag NPs/WS2 hybrid at different thermal annealing temperatures were investigated. It was found that the surface-enhanced Raman scattering (SERS) and catalytic activity of the hybrid were optimized by tuning the annealing temperature, with the optimal SERS and catalytic properties observed at 290 °C. These results may open new avenues for improving the efficiency and expanding the research field of plasmon-driven reactions.

Physicochemical properties of ultrasmall colloidal silver nanoparticles: an experimental and computational approach

Silver nanoparticles (AgNPs) exhibit very interesting properties that have been employed in several kinds of applications spanning from antibacterial activity to plasmon-polaritons generation. Nanoparticle size strongly influences these applications. However, the characterization of ultrasmall AgNPs (particle diameter < 10 nm) encompassing different aspects such as average size, polydispersion, shape (anisotropy), concentration, and density remains a challenging task. To address these challenges, we combined TEM measurements with a computational framework based on Mie-Gans theory. This allowed us to describe the aforementioned AgNP features accurately. The synthesis of AgNPs in an aqueous medium involved the use of silver nitrate as a chemical precursor and sodium borohydride as a reducing agent, with polyvinylpyrrolidone acting as a stabilizing agent. Our outcomes showed that increasing the concentration of the precursor and reducing agent with a fixed 1 : 2 molar ratio tends to yield ultrasmall AgNPs with low to moderate polydispersion, a nearly spherical shape (low anisotropy), concentration in the nanomolar range and density close to silver bulk. Also, we established an analytical expression that correlates the extinction molar absorptivity to AgNP size considering the nanoparticle shape. Notably, the computational framework proved to be highly effective in extracting crucial information about the AgNPs from UV-vis spectroscopy data. In conclusion, our study sheds light on the unique properties of ultrasmall AgNPs and presents a comprehensive approach for properly characterizing these nanoparticles, paving the way for further advancements in their applications.

Optical Control of the Localized Surface Plasmon Resonance in a Heterotype and Hollow Gold Nanosheet

The remote excitation and remote-controlling of the localized surface plasmon resonance (LSPR) in a heterotype and hollow gold nanosheet (HGNS) is studied using FDTD simulations. The heterotype HGNS contains an equilateral and hollow triangle in the center of a special hexagon, which forms a so-called hexagon-triangle (H-T) heterotype HGNS. If we focus the incident-exciting laser on one of the vertexes of the center triangle, the LSPR could be achieved among other remote vertexes of the outer hexagon. The LSPR wavelength and peak intensity depend sensitively on factors such as the polarization of the incident light, the size and symmetry of the H-T heterotype structure, etc. Several groups of the optimized parameters were screened out from numerous FDTD calculations, which help to further obtain some significant polar plots of the polarization-dependent LSPR peak intensity with two-petal, four-petal or six-petal patterns. Remarkably, based on these polar plots, the on-off switching of the LSPR coupled among four HGNS hotspots could be remote-controlled simply via only one polarized light, which shows promise for its potential application in remote-controllable surface-enhanced Raman scattering (SERS), optical interconnects and multi-channel waveguide switches.

Organic Solar Cells: Physical Principle and Recent Advances

Organic solar cells (OSC) based on organic semiconductor materials that convert solar energy into electric energy have been constantly developing at present, and also an effective way to solve the energy crisis and reduce carbon emissions. In the past several decades, efforts have been made to improve the power conversion efficiency (PCE) of OSCs. During this period, a variety of structural and material forms of OSCs have evolved. Commercializing OSCs, extending their service life and exploring their future development are promising but challenging. In this review, we first briefly introduce the development of OSCs and then summarize and analyze the working principle, performance parameters, and structural features of OSCs. Finally, we highlight some breakthrough related to OSCs in detail.

Plasmon-driven catalytic reactions in optoplasmonic sandwich hybrid structure

As an interesting phenomenon in the field of surface enhanced Raman spectroscopy (SERS), the plasmon-driven catalytic reaction (PDSC) induced by plasmonic hot electrons has great value in the research of novel properties of surface plasmons and accuracy of SERS applications. In this work, an optoplasmonic sandwich hybrid structure is proposed for studying PDSC of p-aminothiophenol (PATP) molecules, which is composed of Au film, metal organic frameworks (MOFs) nanoparticles, zeolithic imidazolate (ZIF-8), and single S i O ₂ microsphere (Au f i l m@M O F s@S i O ₂). In order to analyze the novel, to the best of our knowledge, phenomenon of the PDSC in this micro-nano structure, the hot electron generation in the MOF without the plasmonic core is carried out by combining the plasmonic enhancement of gold film with the light concentration of microspheres. Experimental data show that the PDSC reactions is dependent on the size of the MOFs nanoparticle and the size of the S i O ₂ microsphere, which is confirmed by the electromagnetic field simulation of the finite-difference time-domain method (FDTD). Our work not only strengthens the understanding of surface plasmon in optoplasmonic hybrid structures but also has broad application prospects in the SERS and plasmon-driven catalytic fields.

Observation of resonant exciton and correlated plasmon yielding correlated plexciton in amorphous silicon with various hydrogen content

Hydrogenated amorphous silicon (a-Si: H) has received great attention for rich fundamental physics and potentially inexpensive solar cells. Here, we observe new resonant excitons and correlated plasmons tunable via hydrogen content in a-Si: H films on Indium Tin Oxide (ITO) substrate. Spectroscopic ellipsometry supported with High Resolution-Transmission Electron Microscopy (HR-TEM) is used to probe optical properties and the density of electronic states in the various crystallinity from nano-size crystals to amorphous a-Si: H films. The observed optical and electronic structures are analyzed by the second derivative with analytic critical-point line shapes. The complex dielectric function shows good agreement with microscopic calculations for the energy shift and the broadening inter-band transitions based on the electron-hole interaction. Interestingly, we observe an unusual spectral weight transfer over a broad energy range revealing electronic correlations that cause a drastic change in the charge carrier density and determine the photovoltaic performance. Furthermore, the interplay of resonant excitons and correlated plasmons is discussed in term of a correlated plexciton. Our result shows the important role of hydrogen in determining the coupling of excitons and plasmons in a-Si: H film for photovoltaic devices.

Surface-Plasmon-Assisted Growth, Reshaping and Transformation of Nanomaterials

Excitation of surface plasmon resonance of metal nanostructures is a promising way to break the limit of optical diffraction and to achieve a great enhancement of the local electromagnetic field by the confinement of optical field at the nanoscale. Meanwhile, the relaxation of collective oscillation of electrons will promote the generation of hot carrier and localized thermal effects. The enhanced electromagnetic field, hot carriers and localized thermal effects play an important role in spectral enhancement, biomedicine and catalysis of chemical reactions. In this review, we focus on surface-plasmon-assisted nanomaterial reshaping, growth and transformation. Firstly, the mechanisms of surface-plasmon-modulated chemical reactions are discussed. This is followed by a discussion of recent advances on plasmon-assisted self-reshaping, growth and etching of plasmonic nanostructures. Then, we discuss plasmon-assisted growth/deposition of non-plasmonic nanostructures and transformation of luminescent nanocrystal. Finally, we present our views on the current status and perspectives on the future of the field. We believe that this review will promote the development of surface plasmon in the regulation of nanomaterials.

Plasmon-assisted nanophase engineering of titanium dioxide for improved performances in single-particle based sensing and photocatalysis

Titanium dioxide (TiO₂) due to its large bandgap, has a very limited efficiency in utilizing sunlight for photocatalysis and photoanode applications. Sensitizing with metallic nanoparticles is one of the promising routes for resolving this issue but it requires thermal annealing and proper bandgap engineering to optimize the Schottky junctions. Here we use plasmonic nanoheating to locally anneal the TiO₂ medium with a sub-nanometer (sub-nm) feature, which results in a nanophase transition from amorphous TiO₂ to anatase and rutile with a gradient configuration. Such gradient nanocoatings of rutile/anatase establish a cascade hot electron transfer via a conduction band and defect states, which improves the surface enhanced Raman scattering (SERS) performance and photocatalytic efficiency over an order of magnitude. Unlike conventional global annealing, this nanoannealing strategy with plasmonic heating enables sub-nm control at the interface between the metal and semiconductors, and this strategy not only provides new opportunities for single particle SERS, but also shows significant implications for photocatalysis and hot-electron chemistry.

Enhancing SERS Intensity by Coupling PSPR and LSPR in a Crater Structure with Ag Nanowires

The sensitive characteristics of surface-enhanced Raman scattering (SERS) can be applied to various fields, and this has been of interest to many researchers. Propagating surface plasmon resonance (PSPR) was initially utilized but, recently, it has been studied coupled with localized surface plasmon resonance that occurs in metal nanostructures. In this study, a new type of metal microstructure, named crater, was used for generating PSPR and Ag nanowires (AgNWs) for the generation of LSPR. A crater structure was fabricated on a GaAs (100) wafer using the wet chemical etching method. Then, a metal film was deposited inside the crater, and AgNWs were uniformly coated inside using the spray coating method. Metal films were used to enhance the electromagnetic field when coupled with AgNWs to obtain a high SERS intensity. The SERS intensity measured inside the crater structure with deposited AgNWs was up to 17.4 times higher than that of the flat structure with a deposited Ag film. These results suggest a new method for enhancing the SERS phenomenon, and it is expected that a larger SERS intensity can be obtained by fine-tuning the crater size and diameter and the length of the AgNWs.

Enhanced solid-state plasmon catalyzed oxidation and SERS signal in the presence of transition metal cations at the surface of gold nanostructures

The effect of several metal cations (Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) on the photochemical conversion of 4-aminothiophenol (4-ATP) into 4,4'-dimercaptoazobenzene (DMAB) is probed using surface enhanced Raman scattering (SERS). The coupling reaction is carried out on the surface of Au nanoparticles and Au nanorods using 532 nm and 632.8 nm laser excitations, respectively, in the absence and presence of metal cations. Here, we report that DMAB formation on the surface of Au nanostructures - when carried out in the solid state - is augmented significantly (by a factor of 1.98 to 4.07 and 3.34 to 5.74 for Au nanoparticle and Au nanorod substrates, respectively, and depending on the metal). Furthermore, the SERS signal is also markedly enhanced. Thus, the results underpin a new way of carrying out a photochemical reaction with a higher yield along with a higher SERS signal.

Plasmon-Driven Interfacial Catalytic Reactions in Plasmonic MOF Nanoparticles

Benefiting from the noble metal nanoparticle core and organic porous nanoshell, plasmonic metal-organic frameworks (MOFs) become a nanostructure with great enhancement of the electromagnetic field and a high density of reaction sites, which has fantastic optical properties in surface plasmon-related fields. In this work, the plasmon-driven interfacial catalytic reactions involving p-aminothiophenol to 4,4'-dimercaptoazobenzene (trans-DMAB) in both the liquid and gaseous phases are studied in plasmonic MOF nanoparticles, which consist of a Ag nanoparticle core and an organic shell (ZIF-8). The surface-enhanced Raman spectroscopy (SERS) spectra recorded at the plasmonic MOF in an aqueous environment demonstrate that the reversible plasmon-driven interfacial catalytic reactions could be modulated by a reductant (NaBH₄) or oxidant (H₂O₂). Also, the situ SERS spectra also point out that plasmonic MOF (AgNP@ZIF-8) nanoparticles exhibit much better catalytic performance in the H₂O₂ solution compared to pure Ag nanoparticles for the anti-oxidation caused by the MOF shell. It is surprising that although there is greater SERS enhancement obtained at pure Ag nanoparticles, the plasmon-driven interfacial catalytic reactions only occur at plasmonic AgNP@ZIF-8 nanoparticles in the gaseous phase. This interesting phenomenon is further confirmed and analyzed by simulated electromagnetic field distributions, which could be understood by the effective capture of gaseous molecules by the organic porous nanoshell. Our work not only explores the plasmonic MOF nanoparticles with unique optical properties but also strengthens the understanding of plasmon-driven interfacial catalytic reactions.

Binary Surfactant-Mediated Tunable Nanotip Growth on Gold Nanoparticles and Applications in Photothermal Catalysis

Plasmonic nanostructures with sharp tips are widely used for optical signal enhancement because of their strong light-confining abilities. These structures have a wide range of potential applications, for example, in sensing, bioimaging, and surface-enhanced Raman scattering. Au nanoparticles, which are important plasmonic materials with high photothermal conversion efficiencies in the visible to near-infrared region, have contributed greatly to the development of photothermal catalysis. However, the existing methods for synthesizing nanostructures with tips need the assistance of poly(vinylpyrrolidone), thiols, or biomolecules. This greatly hinders signal detection because of stubborn residues. Here, we propose an efficient binary surfactant-mediated method for controlling nanotip growth on Au nanoparticle surfaces. This avoids the effects of surfactants and can be used with other Au nanostructures. The Au architecture tip growth process can be controlled well by adjusting the ratio of hexadecyltrimethylammonium bromide to hexadecyltrimethylammonium chloride. This is due to the different levels of attraction between Br^-/Cl^- and Au³⁺ ions. The surface-enhanced Raman scattering and catalytic abilities of the synthesized nanoparticles with tips were evaluated by electromagnetic simulation and photothermal catalysis experiments (with 4-nitrothiophenol). The results show good potential for use in surface-enhanced Raman scattering applications. This method provides a new strategy for designing plasmonic photothermal nanostructures for chemical and biological applications.

Free-Standing Single Ag Nanowires for Multifunctional Optical Probes

Miniaturized and manipulable optical probes are the foundation for developing in situ characterization devices in confined space. We developed two methods for fabricating free-standing single Ag nanowires (AgNWs) directly at the tip of a glass capillary either by chemical or electrochemical reduction. The electrochemical nature of both methods resulted in a rapid growth rate of AgNWs up to 1.38 μm/s and a controllable length from 5 to 450 μm. The AgNWs with a unique anisotropic structure allow localized surface plasmon resonance and surface plasmon waveguides in the radial direction and axial direction, respectively. We verified the possibility of using single AgNWs as an optical dispersion device and waveguide probe. By controlling the experimental conditions, rough-surface AgNWs with high surface-enhanced Raman scattering (SERS) activity were also fabricated. These SERS-active probes also exhibited advantages in acquiring molecular information from a single living cell.

Geometric control over surface plasmon polariton out-coupling pathways in metal-insulator-metal tunnel junctions

Metal-insulator-metal tunnel junctions (MIM-TJs) can electrically excite surface plasmon polaritons (SPPs) well below the diffraction limit. When inelastically tunneling electrons traverse the tunnel barrier under applied external voltage, a highly confined cavity mode (MIM-SPP) is excited, which further out-couples from the MIM-TJ to photons and single-interface SPPs via multiple pathways. In this work we control the out-coupling pathways of the MIM-SPP mode by engineering the geometry of the MIM-TJ. We fabricated MIM-TJs with tunneling directions oriented vertical or lateral with respect to the directly integrated plasmonic strip waveguides. With control over the tunneling direction, preferential out-coupling of the MIM-SPP mode to SPPs or photons is achieved. Based on the wavevector distribution of the single-interface SPPs or photons in the far-field emission intensity obtained from back focal plane (BFP) imaging, we estimate the out-coupling efficiency of the MIM-SPP mode to multiple out-coupling pathways. We show that in the vertical-MIM-TJs the MIM-SPP mode preferentially out-couples to single-interface SPPs along the strip waveguides while in the lateral-MIM-TJs photon out-coupling to the far-field is more efficient.

Interfering Plasmons in Coupled Nanoresonators to Boost Light Localization and SERS

Plasmonic self-assembled nanocavities are ideal platforms for extreme light localization as they deliver mode volumes of <50 nm³. Here we show that high-order plasmonic modes within additional micrometer-scale resonators surrounding each nanocavity can boost light localization to intensity enhancements >10⁵. Plasmon interference in these hybrid microresonator nanocavities produces surface-enhanced Raman scattering (SERS) signals many-fold larger than in the bare plasmonic constructs. These now allow remote access to molecules inside the ultrathin gaps, avoiding direct irradiation and thus preventing molecular damage. Combining subnanometer gaps with micrometer-scale resonators places a high computational demand on simulations, so a generalized boundary element method (BEM) solver is developed which requires 100-fold less computational resources to characterize these systems. Our results on extreme near-field enhancement open new potential for single-molecule photonic circuits, mid-infrared detectors, and remote spectroscopy.

Characterisation and Manipulation of Polarisation Response in Plasmonic and Magneto-Plasmonic Nanostructures and Metamaterials

Optical properties of metal nanostructures, governed by the so-called localised surface plasmon resonance (LSPR) effects, have invoked intensive investigations in recent times owing to their fundamental nature and potential applications. LSPR scattering from metal nanostructures is expected to show the symmetry of the oscillation mode and the particle shape. Therefore, information on the polarisation properties of the LSPR scattering is crucial for identifying different oscillation modes within one particle and to distinguish differently shaped particles within one sample. On the contrary, the polarisation state of light itself can be arbitrarily manipulated by the inverse designed sample, known as metamaterials. Apart from polarisation state, external stimulus, e.g., magnetic field also controls the LSPR scattering from plasmonic nanostructures, giving rise to a new field of magneto-plasmonics. In this review, we pay special attention to polarisation and its effect in three contrasting aspects. First, tailoring between LSPR scattering and symmetry of plasmonic nanostructures, secondly, manipulating polarisation state through metamaterials and lastly, polarisation modulation in magneto-plasmonics. Finally, we will review recent progress in applications of plasmonic and magneto-plasmonic nanostructures and metamaterials in various fields.

Nanoplasmonic Nanorods/Nanowires from Single to Assembly: Syntheses, Physical Mechanisms and Applications

Gold nanorods are anisotropic and exhibit different optical characteristics in both transverse and longitudinal directions, so the plasmon resonance in the near-infrared region will reflect two absorption peaks. Because of strong enhancements of electromagnetic fields of gold nanorods, gold nanorods are widely used in medical treatment, biological detection, sensors, solar cells and other fields. Since rapid developments of gold nanorods, it is necessary to sort out the recent achievements. In this review, we select three classifications of single nanorods/nanowires, dimers and assembled nanorods to introduce their syntheses methods, optical properties and applications respectively. We firstly overview the history of nanorods/nanowires syntheses and summarize the improvement of the commonly utilized seed-mediated growth synthesis method; and then, physically, nano-plasmonic and optical properties of single and assembled nanorod/nanowires are concluded in detail. Lastly, we mainly summarize the recent advances in applications and provide perspective in different fields.

Coherent Enhancement of Dual-Path-Excited Remote SERS

Combining both localized surface plasmon polaritons (LSPPs) and propagating surface plasmon polaritons, remote surface-enhanced Raman scattering (SERS) emerges as a novel sensing technology in recent years, which could avoid the overlap of incident light and inelastic scattering light in SERS. Compared to traditional SERS, it has novel applications in sensors, plasmon-driven surface-catalyzed reactions, Raman optical activity, etc. However, the weak Raman intensity of remote SERS impedes its further application. In this work, we demonstrated that the remote SERS signals could be enhanced by more than 100% through the subwavelength interference in dual-path-excited Ag-branched nanowire dimer and nanowire-nanoparticle systems. Our experiment has revealed that remote SERS intensities could be modulated by polarization and phase differences of two incident lights illuminating at two separate nanowire terminals. The simulated electromagnetic field distributions through the finite-difference time-domain (FDTD) method indicate that subwavelength interference occurs in Ag nanowires, which causes the Raman intensities collected at a remote site is greatly influenced by the coherent superposition of propagating surface plasmon polaritons (PSPPs). Our work on this coherent enhancement could not only promote the application of remote SERS but also enlarge the research on light manipulating in the subwavelength.

Twin-ZnSe nanowires as surface enhanced Raman scattering substrate with significant enhancement factor upon defect

Semiconductor-based surface enhanced Raman scattering (SERS) substrate design has attracted much interest due to the excellent photoelectronic and biochemical properties. The structural change caused by twin in semiconductor will have an influence on improving the Raman signals enhancement based on the chemical mechanism (CM). Here, we demonstrated the twin in semiconductor ZnSe nanowires as an ultrasensitive CM-based SERS platform. The SERS signals of the rhodamine 6G (R6G) and crystal violet (CV) molecules adsorbed on twin-ZnSe nanowires could be easily detected even with an ultralow concentration of 10^-11 M and 10^-8 M, respectively, and the corresponding enhancement factor (EF) were up to 6.12 × 10⁷ and 3.02 × 10⁵, respectively. In addition, the charge transfer (CT) between the twin-ZnSe nanowires and R6G molecule has been demonstrated theoretically with first-principles calculations based on density-functional theory (DFT). These results demonstrated the proposed ZnSe nanowires with twin as SERS substrate has a broader application in the field of biochemical sensing.

Electron-plasmon interaction on lithium niobate with gold nanolayer and its field distribution dependent modulation

Surface plasmon resonance (SPR) enables strong field confinement, opening thereby new avenues for device miniaturization and reducing energy consumption. Plasmonic devices with electrical tunability attract tremendous interest for various applications. Most of the current researches achieved SPR modulation with relatively large driving voltages, or by other relatively low-speed tuning approaches, such as thermo-optic, magneto-optic, acousto-optic etc. In this paper, we propose and demonstrate an efficiently electrical SPR modulation based on lithium niobate (LN) with gold nanolayer (~81 nm) via electron-plasmon interaction. Efficient intensity modulation and wavelength shift (in visible band) of ~5.7 dB/V and ~36.3 nm/V are respectively obtained with low DC current. More importantly, modulation phenomenon of field distribution dependent is also observed and experimentally unveiled. Further performance is analyzed in terms of AC modulation and polarization characteristics. This key achievement opens up opportunities for applications such as optical interconnection, electric field sensing, electrically plasmonic modulation, etc.

Rapid identification and antibiotic susceptibility test of pathogens in blood based on magnetic separation and surface-enhanced Raman scattering

An effective surface-enhanced Raman scattering (SERS) method is presented for the rapid identification and drug sensitivity analysis of pathogens in blood. In a first step, polyethyleneimine-modified magnetic microspheres (Fe₃O₄@PEI) were used to enrich bacteria from blood samples. Next, the Fe₃O₄@PEI@bacteria complex was cultured on both ordinary and drug-sensitive plates. Lastly, the SERS spectra of single colonies were acquired in order to identify different pathogens and their resistant strains by comparison with established standardized bacterial SERS spectras and orthogonal partial least squares discriminant analysis (OPLS-DA) method. Staphylococcus aureus, Acinetobacter baumannii, Pseudomonas aeruginosa and their resistant strains were used to evaluate the performance of the SERS method. The results demonstrate that the method can accurately detect and identify all the tested sensitive and drug-resistant strains of bacteria, including 77 clinical blood infection samples. The method provides a way for rapid identification and susceptibility test of pathogens, and has great potential to replace currently used time-consuming methods. Graphical abstract Schematic presentation of a method for the rapid identification and drug sensitivity analysis of pathogens in blood. It is based on a combination of magnetic separation, SERS fingerprint analysis and orthogonal partial least squares discriminant analysis (OPLS-DA).

Polarization-dependent surface plasmon-driven catalytic reaction on a single nanowire monitored by SERS

The polarizing effect of an excitation laser on a plasmon-driven catalytic reaction on a single nanowire (NW) was investigated experimentally and theoretically. The dimerization of 4-nitrobenzenethiol (4NBT) to p,p'-dimercaptoazobenzene (DMAB) due to localized surface plasmon resonance (LSPR) was realized and monitored via surface enhanced Raman scattering (SERS). The SERS signal degradation has been compensated by using different equivalent points on the NW. It was shown that the SERS signals of both the reactant and product were sensitive to the angles (θ) between the longitude of the NW and the polarization direction of the excitation laser. When the polarization is along the transverse direction of the NW, the SERS signals are drastically enhanced by the LSPR. The efficiency of the plasmon-driven catalytic reaction increased significantly. The mechanism of the polarization-dependent plasmon-driven catalytic reaction was revealed by our dark field experiment and numerical finite-difference time-domain simulation. It was demonstrated that the maximum intensity of the electric field near the surface of the NW would also be a function of the angle θ. The theoretical and experimental results were consistent with each other. This research may pave a way for controlling plasmon-driven catalytic reactions by changing the polarization of an excitation laser incident on single anisotropic nanostructures such as a single NW.

Exciton-plasmon hybrids for surface catalysis detected by SERS

Surface plasmons (SPs), in which the free electrons are collectively excited on the metal surface, have been successfully used in chemical analysis and signal detection. Generally, SPs possess two types of decay channels. SPs decay either nonradiatively via the generation of hot electrons or radiatively through re-emitted photons, which can trigger surface chemical reactions when the molecules are adsorbed on the surface of metal nanoparticles. An excitation light with a special wavelength is irradiated on the surface of the plasmonic nanostructure, the strong coupling interaction between electrons and light will then occur on this, and this is followed by the development of a series of unique properties. 2D materials have been a hot topic of research for more than a decade, since graphene was found in 2004. Recently, the combination of graphene with metal NPs has been shown to possess many supernormal advantages, such as high stability and catalytic activity, which have been successfully applied in plasmon-exciton co-driven chemical reactions.

Point Spread Function of Objective-Based Surface Plasmon Resonance Microscopy

Objective-based surface plasmon resonance microscopy (SPRM) is a novel optical imaging technique that can map the spatial distribution of a local refractive index based on propagating surface plasmon polaritons (SPPs). Different from some other optical microscopy that shows a dot-like point spread function (PSF), a nanosized object appears as a wave-like pattern containing parabolic tails in SPRM. The geometrical complexity of the wave-like pattern hampered the quantitative interpretation of the PSF of SPRM. Previous studies have shown that two adjacent rings were obtained in the frequency domain by applying a two-dimensional Fourier transform to such patterns. In the present work, a ring-fitting method was developed to extract geometrical features out of the dual rings and to connect these features with several experimental parameters. It was found that the radius of ring equaled to the wavevector of SPPs. Its orientation revealed the propagation direction of SPPs. The coordinate distance of the center of ring gave the parallel component of the wavevector of the incident light, which was regulated by the incident angle. The ring-broadening factor reflected the propagation length of SPPs in a reciprocal relationship. Systematical and quantitative interpretations in the frequency domain not only advanced the basic understanding on the PSF of SPRM but also opened up the possibility to utilize these frequency-domain features for detection and sensing purposes in future.

Remote excitation and detection of surface-enhanced Raman scattering from graphene

We demonstrate the remote excitation and detection of surface-enhanced Raman scattering (SERS) from graphene using a silver nanowire as a plasmonic waveguide. By investigating a nanowire touching a graphene sheet at only one terminal, we first show the remote excitation of SERS from graphene by propagating surface plasmon polaritons (SPPs) launched by a focused laser over distances on the order of 10 μm. Remote detection of SERS is then demonstrated for the same nanowire by detecting light emission at the distal end of the nanowire that was launched by graphene Raman scattering and carried to the end of the nanowire by SPPs. We then show that the transfer of the excitation and Raman scattered light along the nanowire can also be visualized through spectrally selective back focal plane imaging. Back focal plane images detected upon focused laser excitation at one of the nanowire's tips reveal propagating surface plasmon polaritons at the laser energy and at the energies of the most prominent Raman bands of graphene. With this approach the identification of remote excitation and detection of SERS for nanowires completely covering the Raman scatterer is achieved, which is typically not possible by direct imaging.

Electromagnetic Field Redistribution in Metal Nanoparticle on Graphene

Benefiting from the induced image charge on metal film, the light energy is confined on a film surface under metal nanoparticle dimer, which is called electromagnetic field redistribution. In this work, electromagnetic field distribution of metal nanoparticle monomer or dimer on graphene is investigated through finite-difference time-domain method. The results point out that the electromagnetic field (EM) redistribution occurs in this nanoparticle/graphene hybrid system at infrared region where light energy could also be confined on a monolayer graphene surface. Surface charge distribution was analyzed using finite element analysis, and surface-enhanced Raman spectrum (SERS) was utilized to verify this phenomenon. Furthermore, the data about dielectric nanoparticle on monolayer graphene demonstrate this EM redistribution is attributed to strong coupling between light-excited surface charge on monolayer graphene and graphene plasmon-induced image charge on dielectric nanoparticle surface. Our work extends the knowledge of monolayer graphene plasmon, which has a wide range of applications in monolayer graphene-related film.

Coaxial nanowires as plasmon-mediated remote nanosensors

This study reports on the plasmon-mediated remote Raman sensing promoted by specially designed coaxial nanowires. This unusual geometry for Raman study is based on the separation, by several micrometres, of the excitation laser spot, on one tip of the nanowire, and the Raman detection at the other tip. The very weak efficiency of Raman emission makes it challenging in a remote configuration. For the proof-of-concept, we designed coaxial nanowires consisting of a gold core to propagate surface plasmon polaritons and a Raman-emitting shell of poly(3,4-ethylene-dioxythiophene). The success of the fabrication was demonstrated by correlating, for the same single nanowire, a morphological analysis by electron microscopy and Raman spectroscopy analysis. Importantly for probing the remote-Raman effect, the original hard template-based process allows one to control the location of the polymer shell all along the nanowire, or only close to one or the two nanowire tips. Such all-in-one single nanowires could have applications in the remote detection of photo-degradable substances and for exploring 1D nanosources for integrated photonic and plasmonic systems.

Hollow TiO2@Co9S8 Core-Branch Arrays as Bifunctional Electrocatalysts for Efficient Oxygen/Hydrogen Production

Designing ever more efficient and cost-effective bifunctional electrocatalysts for oxygen/hydrogen evolution reactions (OER/HER) is greatly vital and challenging. Here, a new type of binder-free hollow TiO2@Co9S8 core-branch arrays is developed as highly active OER and HER electrocatalysts for stable overall water splitting. Hollow core-branch arrays of TiO2@Co9S8 are readily realized by the rational combination of crosslinked Co9S8 nanoflakes on TiO2 core via a facile and powerful sulfurization strategy. Arising from larger active surface area, richer/shorter transfer channels for ions/electrons, and reinforced structural stability, the as-obtained TiO2@Co9S8 core-branch arrays show noticeable exceptional electrocatalytic performance, with low overpotentials of 240 and 139 mV at 10 mA cm-2 as well as low Tafel slopes of 55 and 65 mV Dec-1 for OER and HER in alkaline medium, respectively. Impressively, the electrolysis cell based on the TiO2@Co9S8 arrays as both cathode and anode exhibits a remarkably low water splitting voltage of 1.56 V at 10 mA cm-2 and long-term durability with no decay after 10 d. The versatile fabrication protocol and smart branch-core design provide a new way to construct other advanced metal sulfides for energy conversion and storage.

Subwavelength core/shell cylindrical nanostructures for novel plasmonic and metamaterial devices

In this review, we introduce novel plasmonic and metamaterial devices based on one-dimensional subwavelength nanostructures with cylindrical symmetry. Individual single devices with semiconductor/metal core/shell or dielectric/metal core/multi-shell structures experience strong light-matter interaction and yield unique optical properties with a variety of functions, e.g., invisibility cloaking, super-scattering/super-absorption, enhanced luminescence and nonlinear optical activities, and deep subwavelength-scale optical waveguiding. We describe the rational design of core/shell cylindrical nanostructures and the proper choice of appropriate constituent materials, which allow the efficient manipulation of electromagnetic waves and help to overcome the limitations of conventional homogeneous nanostructures. The recent developments of bottom-up synthesis combined with the top-down fabrication technologies for the practical applications and the experimental realizations of 1D subwavelength core/shell nanostructure devices are briefly discussed.

Unified Treatment for Plasmon-Exciton Co-driven Reduction and Oxidation Reactions

Revealing the nature of plasmon-exciton co-driven surface catalytic reactions is important and urgent for developing potential applications in energy and environmental science. In this work, we propose a mechanism for plasmon-exciton co-driven surface catalytic reactions based on our experimental results. We provide a method for a unified treatment for reduction and oxidation reactions, which not only strongly supports our proposed mechanism but also promotes a deeper understanding of plasmon-exciton co-driven surface catalytic reactions.

Hollow Au-Ag Alloy Nanorices and Their Optical Properties

Hollow noble metal nanoparticles have excellent performance not only in surface catalysis but also in optics. In this work, the hollow Au-Ag alloy nanorices are fabricated by the galvanic replacement reaction. The dark-field spectrum points out that there is a big difference in the optical properties between the pure Ag nanorices and the hollow alloy nanorices that exhibit highly tunable localized surface plasmon resonances (LSPR) and that possess larger radiative damping, which is also indicated by the finite element method. Furthermore, the surface enhanced Raman scattering (SERS) and oxidation test indicate that hollow Au-Ag alloy nanorices show good anti-oxidation and have broad application prospects in surface-plasmon-related fields.

Utilizing light-triggered plasmon-driven catalysis reactions as a template for molecular delivery and release

Due to the facile manipulation and non-invasive nature of light-triggered release, it is one of the most potent ways to selectively and remotely deliver a molecular target. Among the various carrier platforms, plasmonic nanoparticles possess advantages such as enhanced cellular uptake and easy loading of "cargo" molecules. Two general strategies are currently utilized to achieve light-induced molecule release from plasmonic nanoparticles. The first uses femtosecond laser pulses to directly break the bond between the nanoparticle and the loaded target. The other requires significant photo-thermal effects to weaken the interaction between the cargo molecules and nanoparticle-attached host molecules. Different from above mechanisms, herein, we introduce a new light-controlled molecular-release method by taking advantage of a plasmon-driven catalytic reaction at the particle surface. In this strategy, we link the target to a plasmon responsive molecule, 4-aminobenzenethiol (4-ABT), through the robust and simple EDC coupling reaction and subsequently load the complex onto the particles via the strong Au-thiol interaction. Upon continuous-wave (CW) laser illumination, the excited surface plasmon catalyzes the formation of 4,4'-dimercaptoazobenzenethiol (DMAB) and simultaneously releases the loaded molecules with high efficiency. This method does not require the use of high-power pulsed lasers, nor does it rely on photo-thermal effects. We believe that plasmon-driven release strategies open a new direction for the designing of next-generation light-triggered release processes.

Ag gyrus-nanostructure supported on graphene/Au film with nanometer gap for ideal surface enhanced Raman scattering

The physical phenomenon, surface-enhanced Raman scattering (SERS), is mainly based on the local electromagnetic fields enhancement located at the nano-gaps between metal nanostructures attributed to localized surface plasmon resonance. Therefore, nano-gaps are very important for obtaining high-density hot spots and optimal and uniform SERS signals. However, it remains a challenge to form the three-dimensional ultra-narrow nano-gaps. Here, a gyrus-inspired Gyrus-SERS substrate was fabricated with the nanostructure of Ag gyrus/graphene/Au film using an extremely simple method. The lateral and vertical hot spots respectively were obtained from the dense nano-gaps (~3 nm) between gyrus and the coupling of Ag gyrus and Au film in bilayer graphene nano-gaps (0.68 nm), which were demonstrated in experiment and theory. The proposed Gyrus-SERS platform performs an excellent SERS activity (EF~5 × 10⁹), high sensitivity (the minimum detected concentration of R6G and CV respectively is 10^-13 and 10^-12 M), and outstanding reproducibility (RSD~7.11%). For practical application, the in situ detection of Malachite green (MG) residue on prawn skin was executed using the prepared flexible Gyrus-SERS substrate, which shows the wide potential in food safety field.

Polarization dependence of plasmon enhanced fluorescence on Au nanorod array

The spatial anisotropy of Au nanorod results in two distinct orientational modes by which the polarization orientation dependence of excitation and emission can be studied. In this work, a periodical distributed metallic nanostructure substrate, which contains an array of Au nanorods, is synthesized, and the polarization dependence of the plasmon enhanced fluorescence effect is investigated experimentally and numerically. It is found that the fluorescence emission enhancement of organic probe fluorophores located at the surface of Au nanorods depends on the polarization angle very sensitively. Different polarization orientations of the excitation light result in very different enhancement effects. As a result, the change of the polarization orientation of the excitation light can be a sensitive marker of surface chemistry and other possible practical applications.

Recent advances in surface plasmon-driven catalytic reactions

Surface plasmons, the free electrons' collective oscillations, have been used in the signal detection and analysis of target molecules, where the local surface plasmon resonance (LSPR) can produce a huge EM field, thus enhancing the SERS signal.

Ultra-thin Au tip structure: a novel SERS substrate for in situ observation of a p-aminothiophenol surface-catalytic reaction

In situ observation of a p-aminothiophenol surface-catalytic reaction on a novel Au nano-tip structured SERS substrate.

Control on Surface Plasmon Polaritons Propagation Properties by Continuously Moving a Nanoparticle along a Silver Nanowire Waveguide

Surface plasmon polaritons (SPPs)-based nanowire waveguides possess potential applications for nanophotonic circuits. Precise control on the propagation of SPPs in metal nanowires is thus of significant importance. In this work, we report the control on SPPs propagation properties by moving a silver nanoparticle (Ag NP) along a silver nanowire (Ag NW). The emission intensity at NP can be attenuated to about 25% of the maximum emission value with increasing the distance between excitation end and NP. When NP is gradually moved away from excitation end, the intensity of emission light at Ag NP shows an exponential decay with a superposition of wavy appearance, while the emission at NW end is almost a constant value. It is found that the former is related to the local SPPs field distribution in NW, and the latter is dependent on the distance between excitation end and NW terminal. Moreover, the propagation loss in Ag NP-NW structure has been investigated. Our experiments demonstrate the important role of NP location in NW-based waveguides and provide an effective method of tuning scattering light in NW, which is instructive to design the future specialized function of SPPs-based nanophotonic circuits and devices.

Plasmon-driven surface catalysis on photochemically deposited-based SERS substrates

For the virtues of convenience and repeatability, photochemically deposited nanoparticles (NPs) as ferroelectric-based surface-enhanced Raman scattering (SERS) substrates have great potential in the surface-plasmon-related applications. In this work, the plasmon-driven surface catalysis (PDSC) reaction is investigated on lithium niobate (LiNbO₃) film with photochemically deposited Au NPs. The SERS spectra indicate that the performance of PDSC reaction on a substrate with various Au³⁺ concentrations in photochemical deposition is obviously different. Combining structure characterization and electromagnetic field simulation, this result is mainly attributed to the surface plasmon coupling between Au NPs. Furthermore, the results also point out that the exposure time in photochemical deposition plays an important role in PDSC reactions. Our studies on photochemically deposited Au NP substrates provide strong support and further understanding to the research on PDSC reactions and also to other surface-plasmon-related fields.

Influence of symmetry breaking degrees on surface plasmon polaritons propagation in branched silver nanowire waveguides

Surface plasmon polaritons (SPPs)-based nanowire (NW) waveguides demonstrate promising potentials in the integrated nanophotonic circuits and devices. The realization of controlling SPPs propagation in NWs is significant for the performance of nanophotonic devices when employed for special function. In this work, we report the effect of symmetry breaking degrees on SPPs propagation behavior in manually fabricated branched silver NW structures. The symmetry breaking degree can be tuned by the angle between main NW and branch NW, which influences the emissions at the junction and the main NW terminal in a large extent. Our results illustrate the significance of symmetry breaking degree on SPPs propagation in NW-based waveguides which is crucial for designing the future nanophotonic circuits.

The discovery of the hydrogen bond from p-Nitrothiophenol by Raman spectroscopy: Guideline for the thioalcohol molecule recognition tool

Inter- and intra- molecular hydrogen bonding plays important role in determining molecular structure, physical and chemical properties, which may be easily ignored for molecules with a non-typical hydrogen bonding structure. We demonstrated in this paper that the hydrogen bonding is responsible for the different Raman spectra in solid and solution states of p-Nitrothiophenol (PNTP). The consistence of the theoretical calculation and experiment reveals that the intermolecular hydrogen bonding yields an octatomic ring structure (8) of PNTP in the solid state, confirmed by the characteristic S-H---O stretching vibration mode at 2550 cm^-1; when it comes to the solution state, the breakage of hydrogen bond of S-H---O induced the S-H stretching vibration at 2590 cm^-1. Our findings may provide a simple and fast method for identifying the intermolecular hydrogen bonding.

Tip-Enhanced Raman Spectroscopy

Tip-enhanced Raman spectroscopy (TERS), a combination of Raman spectroscopy and apertureless near-field scanning optical microscopy using a metallic tip which resonates with the local mode of the surface plasmon, can provide a high-sensitive and high-spatial-resolution optical analytical approach. The basic principle of TERS, common experimental setups, various SPM technologies, and excitation/collection configurations are introduced as well as recent research progress with respect to TERS.