Ultrafine MoP Nanoparticle Splotched Nitrogen-Doped Carbon Nanosheets Enabling High-Performance 3D-Printed Potassium-Ion Hybrid Capacitors

Ultrafast Na-Ion Storage in Amorphization Engineered Hollow Vanadium Oxide/MXene Nanohybrids for High-Performance Sodium-Ion Hybrid Capacitors

Sodium ion hybrid capacitors (SIHCs) address the high power and energy requirements in energy storage devices but face significant challenges arising from the slow kinetics and cycling instability of the anode side. Introducing atomic disorder and employing structural engineering in anode materials proves to be effective strategies for achieving rapid charge storage. Here, it is demonstrated that N-doped MXene encapsulated amorphous vanadium oxide hollow spheres (VOx@N-MXene HSs) offer multidirectional open pathways and sufficient vacancies, enabling reversible and fast Na+ insertion/extraction. Machine learning potentials, coupled with molecular simulation techniques, confirm the presence of more abundant pores within the amorphous vanadium oxide (VOx) structure. The simulation of the charging/discharging process elucidates the authentic reaction path and structural evolutions of the VOx@N-MXene HSs, providing sufficient insight into the atomic-scale mechanisms associated with these structural superiorities. The full SIHCs devices demonstrate a high energy density of 198.3 Wh kg-1, along with a long-term cycling lifespan of 8000 cycles. This study offers valuable strategies into the intricate design and exploration of amorphous electrodes, contributing to the advancement of next-generation electrochemical energy devices.

Constructing Multi-Electron Reactions by Doping Mn2+ to Increase Capacity and Stability in K3.2V2.8Mn0.2(PO4)4/C of Phosphate Cathodes for Potassium-Ion Batteries

Vanadium-based phosphate cathode materials (e.g., K3V2(PO4)3) have attracted widespread concentration in cathode materials in potassium-ion batteries owing to their stable structure but suffer from low capacity and poor conductivity. In this work, an element doping strategy is applied to promote its electrochemical performance so that K3.2V2.8Mn0.2(PO4)4/C is prepared via a simple sol-gel method. The heterovalent Mn2+ is introduced to stimulated multiple electron reactions to improve conductivity and capacity, as well as interlayer spacing. Galvanostatic intermittent titration technique (GITT) and in situ X-ray diffraction results further confirm that Mn-doping in the original electrode can obtain superior electrode process kinetics and structural stability. The prepared K3.2V2.8Mn0.2(PO4)4/C exhibits a high-capacity retention of 80.8% after 1 500 cycles at 2 C and an impressive rate capability, with discharge capacities of 87.6 at 0.2 C and 45.4 mA h g-1 at 5 C, which is superior to the majority of reported vanadium-based phosphate cathode materials. When coupled K3.2V2.8Mn0.2(PO4)4/C cathode with commercial porous carbon (PC) anode as the full cell, a prominent energy density of 175 Wh kg-1 is achieved based on the total active mass. Overall, this study provides an effective strategy for meliorating the cycling stability and capacity of the polyanion cathodes for KIB.

Dispersion strategies of nanomaterials in polymeric inks for efficient 3D printing of soft and smart 3D structures: A systematic review

Nanoscience-often summarized as "the future is tiny"-highlights the work of researchers advancing nanotechnology through incremental innovations. The design and innovation of new nanomaterials are vital for the development of next-generation three-dimensional (3D) printed structures characterized by low cost, high speed, and versatile capabilities, delivering exceptional performance in advanced applications. The integration of nanofillers into polymeric-based inks for 3D printing heralds a new era in additive manufacturing, allowing for the creation of custom-designed 3D objects with enhanced multifunctionality. To optimize the use of nanomaterials in 3D printing, effective disaggregation techniques and strong interfacial adhesion between nanofillers and polymer matrices are essential. This review provides an overview of the application of various types of nanomaterials used in 3D printing, focusing on their functionalization principles, dispersion strategies, and colloidal stability, as well as the methodologies for aligning nanofillers within the 3D printing framework. It discusses dispersive methods, synergistic dispersion, and in-situ growth, which have yielded smart 3D-printed structures with unique functionality for specific applications. This review also focuses on nanomaterial alignment in 3D printing, detailing methods that enhance selective deposition and orientation of nanofillers within established and customized printing techniques. By emphasizing alignment strategies, we explore their impact on the performance of 3D-printed composites and highlight potential applications that benefit from ordered nanoparticles. Through these continuing efforts, this review shows that the design and development of the new class of nanomaterials are crucial to developing the next generation of smart 3D printed architectures with versatile abilities for advanced structures with exceptional performance.

Design, application, and recycling of zinc alginate/guar gum hydrogel-based fibers

Extreme cold events are quite common, highlighting the urgent need for flexible wearable electronic devices capable of diagnosing human health in low-temperature environments. Using a wet spinning strategy, we successfully developed sodium zinc alginate/guar gum(SZA/GG) hydrogel fibers with excellent environmental resistance, antimicrobial properties, and electrical conductivity. Building on this, we developed a flexible wearable sensing device that operates stably at low temperatures and exhibits a sensitivity of 0.585 within the range of -20 °C to -40 °C, demonstrating excellent response performance. When evaluating the physical state of outdoor athletes, the amplitude and fluctuation range of electrical resistance provide valuable information about the monitored environment and the risk of frostbite for the individual. However, like any device, it eventually reaches its usage limit. To address the issue of recycling hydrogel fiber waste, we propose recycling and carbonizing the discarded devices to use as a biomass carbon source for fabricating button-type supercapacitors. After 10,000 charge-discharge cycles, the capacitance retention rate reached 92.53 %, demonstrating the potential of these supercapacitors and offering a new approach to reducing resource waste.

MXene/Nitrogen-Doped Carbon Nanosheet Scaffold Electrode toward High-Performance Solid-State Zinc Ion Supercapacitor

While MXene is widely used as an electrode material for supercapacitor, the intrinsic limitation of stacking caused by the interlayer van der Waals forces has yet to be overcome. In this work, a strategy is proposed to fabricate a composite scaffold electrode (MCN) by intercalating MXene with highly nitrogen-doped carbon nanosheets (CN). The 2D structured CN, thermally converted and pickling from Zn-hexamine (Zn-HMT), serves as a spacer that effectively prevents the stacking of MXene and contributes to a hierarchically scaffolded structure, which is conducive to ion movement; meanwhile, the high nitrogen-doping of CN tunes the electronic structure of MCN to facilitate charge transfer and providing additional pseudocapacitance. As a result, the MCN50 composite electrode achieves a high specific capacitance of 418.4 F g-1 at 1 A g-1. The assembled symmetric supercapacitor delivers a corresponding power density of 1658.9 W kg-1 and an energy density of 30.8 Wh kg-1. The all-solid-state zinc ion supercapacitor demonstrates a superior energy density of 68.4 Wh kg-1 and a power density of 403.5 W kg-1 and shows a high capacitance retention of 93% after 8000 charge-discharge cycles. This study sheds a new light on the design and development of novel MXene-based composite electrodes for high performance all-solid-state zinc ion supercapacitor.

Ultrathin NiO nanosheets anchored to a nitrogen-doped dodecahedral carbon framework for aqueous potassium-ion hybrid capacitors

Hierarchical porous structures and well-modulated interfacial interactions are essential for the performance of electrode materials. The energy storage performance can be promoted by regulating the diffusion behavior of the electrolyte and constructing a coupled interaction at heterogeneous interfaces. Herein, we have synthesized ultrathin NiO nanosheets anchored to nitrogen-doped hierarchical porous carbon (NiO/N-HPC) and applied it to construct aqueous potassium ion hybrid capacitors (APIHCs). The abundant and interconnected porous architecture promotes electrolyte penetration/diffusion and shortens the ion transport path, thereby accelerating storage reaction kinetics. The nitrogen-doped carbon support can achieve optimized metal oxides-carbon interaction and enhance the adsorption ability for the electrolyte ions, leading to earning higher storage capacity. Consequently, the prepared NiO/N-HPC exhibits a superior capacitance of 126.4 F g-1 at a current density of 0.5 A g-1, and the as-fabricated NiO/N-HPC//N-HPC APIHC achieves an ultra-high capacitance retention of 91.6% over 8000 cycles at a current density of 2 A g-1. Meanwhile, the APIHC device shows an excellent energy density of 21.95 W h kg-1 and a power density of 9000 W kg-1.

A review of hierarchical porous carbon derived from various 3D printing techniques

Hierarchical porous carbon is an area of advanced materials that plays a pivotal role in meeting the increasing demands across various industry sectors including catalysis, adsorption, and energy storage and conversion. Additive manufacturing is a promising technique to synthesize architectured porous carbon with exceptional design flexibility, guided by computer-aided precision. This review paper aims to provide an overview of porous carbon derived from various additive manufacturing techniques, including material extrusion, vat polymerization, and powder bed fusion. The respective advantages and limitations of these techniques will be examined. Some exemplary work on various applications will be showcased. Furthermore, perspectives on future research directions, opportunities, and challenges of additive manufacturing for porous carbon will also be offered.

Inducing Directional Charge Delocalization in 3D-Printable Micro-Supercapacitors Based on Strongly Coupled Black Phosphorus and ReS2 Nanocomposites

The growing interest in so-called interface coupling strategies arises from their potential to enhance the performance of active electrode materials. Nevertheless, designing a robust coupled interface in nanocomposites for stable electrochemical processes remains a challenge. In this study, an epitaxial growth strategy is proposed by synthesizing sulfide rhenium (ReS2) on exfoliated black phosphorus (E-BP) nanosheets, creating an abundance of robust interfacial linkages. Through spectroscopic analysis using X-ray photoelectron spectroscopy and X-ray absorption spectroscopy, the authors investigate the interfacial environment. The well-developed coupled interface and structural stability contribute to the impressive performance of the 3D-printed E-BP@ReS2-based micro-supercapacitor, achieving a specific capacitance of 47.3 mF cm-2 at 0.1 mA cm-2 and demonstrating excellent long-term cyclability (89.2% over 2000 cycles). Furthermore, density functional theory calculations unveil the positive impact of the strongly coupled interface in the E-BP@ReS2 nanocomposite on the adsorption of H+ ions, showcasing a significantly reduced adsorption energy of -2.17 eV. The strong coupling effect facilitates directional charge delocalization at the interface, enhancing the electrochemical performance of electrodes and resulting in the successful construction of advanced micro-supercapacitors.

Preparation of MoP-based quasi-two-dimensional belt-like composite fibers and its performance modulation for sodium/potassium ion storage

Beyond round nanofibers, electrospinning method is able to fabricate thin fibers with various cross-sectional shapes. In this work, using phosphomolybdic acid to trigger the polymerization reaction of pyrrole with addition of tin salt for the filler of carbon fibers, we prepared quasi-two-dimensional thick belt-like fibers through single spinneret electrospinning. The side-by-side welding nanofiber bundles with dog-bone-shaped cross-section improved the connection between fibers, endowing the fiber films with some flexibility and enabling it to be used as freestanding electrode. Employed as anode for sodium/potassium ion storage, the carbon fiber encapsulated MoP/SnO2 material exhibited promising electrochemical performance. Controlling the collection process of electrospinning, the electrode mass loading can be increased to 10 mg cm-2. Combined with surface selenizing modification, the performance of as-prepared MoP/SnO2/MoSe2 was further improved, which exhibited areal capacity about 1.5 mAh cm-2 as anode for sodium/potassium ion storage with mass loading of 8-9 mg cm-2.

Zn-ion Batteries: Charge Storing Mechanism and Development Challenges

Improving the energy share of renewable energy technologies is the only solution to reduce greenhouse gas emissions and air pollution. The high-performing green battery energy storage technologies are critical for storing energy to address the intermittent nature of renewable energy resources. In recent years, aqueous batteries, particularly Zn-ion batteries (ZIBs), have achieved and shown great potential for stationary energy storage systems owing to their low cost and safer operation. However, the practical applications of the ZIBs have significantly been impeded due to the gap between the breakthroughs achieved in academic research and industrial developments. The present review discusses the ZIB's advantages, possibilities, and shortcomings for stationary energy storage systems. The Review begins with a brief introduction to the ZIBs and their charge storage mechanisms based on the structural properties of cathode materials. The scientific and technical challenges that obstruct the commercialization of the ZIBs are discussed in detail concerning their impact on accelerating the utilization of the ZIBs for real-life applications. The final section highlights the outlook on research in this flourishing field.

Constructing abundant interfaces by decorating MoP quantum dots on CoP nanowires to induce electronic structure modulation for enhanced hydrogen evolution reaction

Interface engineering is a method of enhancing catalytic activity while maintaining a material's surface properties. Thus, we explored the interface effect mechanism via a hierarchical structure of MoP/CoP/Cu3P/CF. Remarkably, the heterostructure MoP/CoP/Cu3P/CF demonstrates an outstanding overpotential of 64.6 mV at 10 mA cm-2 with a Tafel slope of 68.2 mV dec-1 in 1 M KOH. DFT calculations indicate that the MoP/CoP interface in the catalyst exhibited the most favorable H* adsorption characteristics (-0.08 eV) compared to the pure phases of CoP (0.55 eV) and MoP (0.22 eV). This result can be attributed to the apparent modulation of electronic structures within the interface domains. Additionally, the CoCH/Cu(OH)2/CF‖MoP/CoP/Cu3P/CF electrolyzer demonstrates excellent overall water splitting performance, achieving 10 mA cm-2 in 1 M KOH solution with a modest voltage of only 1.53 V. This electronic structure adjustment via interface effects provides a new and efficient approach to prepare high-performance hydrogen production catalysts.

Dual roles of sub-nanometer NiO in alkaline hydrogen evolution reaction: breaking the Volmer limitation and optimizing d-orbital electronic configuration

Pt-based nanoclusters toward the hydrogen evolution reaction (HER) remain the most promising electrocatalysts. However, the sluggish alkaline Volmer-step kinetics and the high-cost have hampered progress in developing high-performance HER catalysts. Herein, we propose to construct sub-nanometer NiO to tune the d-orbital electronic structure of nanocluster-level Pt for breaking the Volmer-step limitation and reducing the Pt-loading. Theoretical simulations firstly suggest that electron transfer from NiO to Pt nanoclusters could downshift the Ed-band of Pt and result in the well-optimized adsorption/desorption strength of the hydrogen intermediate (H*), therefore accelerating the hydrogen generation rate. NiO and Pt nanoclusters confined into the inherent pores of N-doped carbon derived from ZIF-8 (Pt/NiO/NPC) were designed to realize the structure of computational prediction and boost the alkaline hydrogen evolution. The optimal 1.5%Pt/NiO/NPC exhibited an excellent HER performance and stability with a low Tafel slope (only 22.5 mv dec-1) and an overpotential of 25.2 mV at 10 mA cm-2. Importantly, the 1.5%Pt/NiO/NPC possesses a mass activity of 17.37 A mg-1 at the overpotential of 20 mV, over 54 times higher than the benchmark 20 wt% Pt/C. Furthermore, DFT calculations illustrate that the Volmer-step could be accelerated owing to the high OH- attraction of NiO nanoclusters, leading to the Pt nanoclusters exhibiting a balance of H* adsorption and desorption (ΔGH* = -0.082 eV). Our findings provide new insights into breaking the water dissociation limit of Pt-based catalysts by coupling with a metal oxide.

From atomic bonding to heterointerfaces: Co2P/WC constructed by lacunary polyoxometalates induced strategy as efficient hydrogen evolution electrocatalysts at all pH values

Herein, a novel in-situ "atomic binding to heterointerface" strategy is proposed to obtain Co₂P/WC@NC/CNTs catalyst with abundant heterointerface between cobalt phosphide and tungsten carbide (Co₂P/WC) by the polyoxometalates (POMs)-based metal-organic frameworks (MOFs) precursor. The natural quasi interfaces in K₁₀[Co₄(H₂O)₂(PW₉O₃₄)₂] molecule crucially guide the abundant Co₂P/WC heterointerfaces down to atomic level. Meanwhile, MOFs cages can effectively encapsulate nanosized POMs at molecular level to control the size and dispersion of Co₂P/WC nanoparticle, while carbon nanotubes (CNTs) enhance conductivity at nanoscale level. The interfacial electronic modulation between Co₂P and WC lowering the energy barrier of the rate determining step, thus Co₂P/WC@NC/CNTs showed reasonable hydrogen evolution reaction (HER) activity and stability in all-pH media including sea water. This work provides a "bottom-up" synthetic strategy for confined heterostructures, thus offering the prospect for more efficient interfacial charge modulation.

Constructing 2D Sandwich-like MOF/MXene Heterostructures for Durable and Fast Aqueous Zinc-Ion Batteries

Two-dimensional metal-organic frameworks (2D MOFs) can be used as the cathodes for high-performance zinc-ion battery due to their large one-dimensional channels. However, the conventionally poor electrical conductivity and low structural stability hinder their advances. Herein, we report an alternately stacked MOF/MX heterostructure, exhibiting the 2D sandwich-like structure with abundant active sites, improved electrical conductivity and exceptional structural stability. Ex situ characterizations and theoretical calculations reveal a reversible intercalation mechanism of zinc ions and high electrical conductivity in the 2D heterostructure. Electrochemical tests confirm excellent Zn²⁺ migration kinetics and ideal pseudocapacitive behaviors. As a consequence, Cu-HHTP/MX shows a superior rate performance (260.1 mAh g^-1 at 0.1 A g^-1 and 173.1 mAh g^-1 at 4 A g^-1 ) and long-term cycling stability of 92.5 % capacity retention over 1000 cycles at 4 A g^-1 .

3D Printed Integrated Gradient-Conductive MXene/CNT/Polyimide Aerogel Frames for Electromagnetic Interference Shielding with Ultra-Low Reflection

Construction of advanced electromagnetic interference (EMI) shielding materials with miniaturized, programmable structure and low reflection are promising but challenging. Herein, an integrated transition-metal carbides/carbon nanotube/polyimide (gradient-conductive MXene/CNT/PI, GCMCP) aerogel frame with hierarchical porous structure and gradient-conductivity has been constructed to achieve EMI shielding with ultra-low reflection. The gradient-conductive structures are obtained by continuous 3D printing of MXene/CNT/poly (amic acid) inks with different CNT contents, where the slightly conductive top layer serves as EM absorption layer and the highly conductive bottom layer as reflection layer. In addition, the hierarchical porous structure could extend the EM dissipation path and dissipate EM by multiple reflections. Consequently, the GCMCP aerogel frames exhibit an excellent average EMI shielding efficiency (68.2 dB) and low reflection (R = 0.23). Furthermore, the GCMCP aerogel frames with miniaturized and programmable structures can be used as EMI shielding gaskets and effectively block wireless power transmission, which shows a prosperous application prospect in defense industry and aerospace.

200 MPa cold isostatic pressing creates surface-microcracks in a Zn foil for scalable and long-life zinc anodes

The Zn anode suffers from severe dendrite growth and side reactions, which restrict its development in the realm of large-scale energy storage. Herein, in this study, we propose a method to create surface-microcracks in a Zn foil by 200 MPa cold isostatic pressing. The proposed pressing method can avoid the surface tip effect of Zn, and creates a subtly surface-microcracked zinc structure, providing more zinc ion transport channels, thereby effectively alleviating the dendrite growth and side reactions during the repeated Zn plating and stripping. Benefiting from these advantages, the 200 MPa Zn‖Zn symmetric cell can achieve a long cycle life (1525 h) of 1 mA h cm-2 at 2 mA cm-2. The 200 MPa Zn‖VO2 full cell can still maintain a capacity of 110 mA h g-1 after 1000 cycles at 0.1 A g-1. In addition, assembled pouch cells also show excellent cycling stability. The proposed cold isostatic pressing method is compatible with large-scale production applications and provides an effective strategy for realizing high-performance zinc anodes for zinc-ion batteries.

Humidity-Responsive Guar Gum Fibers by Wet Spinning

In this study, guar gum fibers were obtained by wet spinning, in which epichlorohydrin (ECH) and calcium chloride (CaCl₂) were used as the cross-linking agent and metal complexing agent, respectively. The fibers' chemical structure, morphology, crystallinity, and thermal and mechanical properties were analyzed by Fourier infrared spectroscopy, scanning electron microscopy, and so forth. The results showed that ECH reacted with guar gum and formed ether bonds. Meanwhile, ECH can effectively increase the number of cross-linking points and improve the mechanical properties of the fibers. When the ECH content was 12% (w/w), the breaking strength could reach 2.4 cN/dtex. The conductivity of MC-GG fibers varied with the relative humidity and could reach 2.845 × 10^-2 S/cm at maximum. Meanwhile, the contact angle of MC-GG fibers was 33°, indicating that the fibers had good hydrophilicity and humidity response ability and had excellent potential in the field of smart fabrics.

Revealing An Intercalation-Conversion-Heterogeneity Hybrid Lithium-Ion Storage Mechanism in Transition Metal Nitrides Electrodes with Jointly Fast Charging Capability and High Energy Output

The performance of electrode materials depends intensively on the lithium (Li)-ion storage mechanisms correlating ultimately with the Coulombic efficiency, reversible capacity, and morphology variation of electrode material upon cycling. Transition metal nitrides anode materials have exhibited high-energy density and superior rate capability; however, the intrinsic mechanism is largely unexplored and still unclear. Here, a typical 3D porous Fe2 N micro-coral anode is prepared and, an intercalation-conversion-heterogeneity hybrid Li-ion storage mechanism that is beyond the conventional intercalation or conversion reaction is revealed through various characterization techniques and thermodynamic analysis. Interestingly, using advanced in situ magnetometry, the ratio (ca. 24.4%) of the part where conversion reaction occurs to the entire Fe2 N can further be quantified. By rationally constructing a Li-ion capacitor comprising 3D porous Fe2 N micro-corals anode and commercial AC cathode, the hybrid full device delivers a high energy-density (157 Wh kg-1 ) and high power-density (20 000 W kg-1 ), as well as outstanding cycling stability (93.5% capacitance retention after 5000 cycles). This research provides an original and insightful method to confirm the reaction mechanism of material related to transition metals and a fundamental basis for emerging fast charging electrode materials to be efficiently explored for a next-generation battery.

In Situ Visualization of Dynamic Cellular Effects of Phospholipid Nanoparticles via High-Speed Scanning Ion Conductance Microscopy

Phospholipid nanoparticles have been actively employed for numerous biomedical applications. A key factor in ensuring effective and safe applications of these nanomaterials is the regulation of their interactions with target cells, which is significantly dependent on an in-depth understanding of the nanoparticle-cell interactions. To date, most studies investigating these nano-bio interactions have been performed under static conditions and may lack crucial real-time information. It is, however, noteworthy that the nanoparticle-cell interactions are highly dynamic. Consequently, to gain a deeper insight into the cellular effects of phospholipid nanoparticles, real-time observation of cellular dynamics after nanoparticle introduction is necessary. Herein, a proof-of-concept in situ visualization of the dynamic cellular effects of sub-100 nm phospholipid nanoparticles using high-speed scanning ion conductance microscopy (HS-SICM) is reported. It is revealed that upon introduction into the cellular environment, within a short timescale of hundreds of seconds, phospholipid nanoparticles can selectively modulate the edge motility and surface roughness of healthy fibroblast and cancerous epithelial cells. Furthermore, the dynamic deformation profiles of these cells can be selectively altered in the presence of phospholipid nanoparticles. This work is anticipated to further shed light on the real-time nanoparticle-cell interactions for improved formulation of phospholipid nanoparticles for numerous bioapplications.

Self-Healing and Shape-Editable Wearable Supercapacitors Based on Highly Stretchable Hydrogel Electrolytes

Shape editability combined with a self-healing capability and long-term cycling durability are highly desirable properties for wearable supercapacitors. Most wearable supercapacitors have rigid architecture and lack the capacity for editability into desirable shapes. Through sandwiching hydrogel electrolytes between two electrodes, a suite of wearable supercapacitors that integrate desirable properties namely: repeated shape editability, excellent self-healing capability, and long-term cycling durability is demonstrated. A strategy is proposed to enhance the long-term cycling durability by utilizing hydrogel electrolytes with unique cross-linking structures. The dynamic crosslinking sites are formed by quadruple H bonds and hydrophobic association, stabilizing the supercapacitors from inorganic ion disruption during charge-discharge processes. The fabricated supercapacitors result in the capacitance retention rates of 99.6% and 95.8% after 5000 and 10 000 charge-discharge cycles, respectively, which are much higher than others reported in the literature. Furthermore, the supercapacitor sheets can be repeatedly processed into various shapes without any capacitance loss. The supercapacitors exhibit a 95% capacitance retention rate after five cutting/self-healing cycles, indicative of their excellent self-healing performance. To demonstrate real-life applicability, the wearable supercapacitors are successfully used to power a light-emitting diode and an electronic watch.

Fundamental Understanding and Research Progress on the Interfacial Behaviors for Potassium-Ion Battery Anode

Potassium-ion batteries (PIBs) exhibit a considerable application prospect for energy storage systems due to their low cost, high operating voltage, and superior ionic conductivity. As a vital configuration in PIBs, the two-phase interface, which refers to K-ion diffusion from the electrolyte to the electrode surface (solid-liquid interface) and K-ion migration between different particles (solid-solid interface), deeply determines the diffusion/reaction kinetics and structural stability, thus significantly affecting the rate performance and cyclability. However, researches on two-phase interface are still in its infancy and need further attentions. This review first starts from the fundamental understanding of solid-liquid and solid-solid interfaces to in-depth analyzing the effect mechanism of different improvement strategies on them, such as optimization of electrolyte and binders, heterostructure design, modulation of interlayer spacing, etc. Afterward, the research progress of these improvement strategies is summarized comprehensively. Finally, the major challenges are proposed, and the corresponding solving strategies are presented. This review is expected to give an insight into the importance of two-phase interface on diffusion/reaction kinetics, and provides a guidance for developing other advanced anodes in PIBs.

Tailoring Nitrogen Species in Disk-Like Carbon Anode Towards Superior Potassium Ion Storage

Carbon materials, as promising anode candidates for K⁺ storage due to their low cost, abundant sources, and high physicochemical stability, however, encounter limited specific capacity and unfavorable cycling stability that seriously hinder their practical applications. Herein, a feasible strategy to tailor and stabilize the nitrogen species in unique P/N co-doped disk-like carbon through the Sn incorporation (P/N_Sn -CD) is presented, which can largely enhance the specific capacity and cycling capability for K⁺ storage. Specifically, it delivers a high specific capacity of 439.3 mAh g^-1 at 0.1 A g^-1 and ultra-stable cycling capability with a capacity retention of 93.5% at 5000 mA g^-1 over 5000 cycles for K⁺ storage. The underlying mechanism for the superior K⁺ storage performance is investigated by systematical experimental data combined with theoretical simulation results, which can be derived from the increased edge-nitrogen species, improved content and stability of P/N heteroatoms, and enhanced ionic/electronic kinetics. After coupling P/N_Sn -CD anode with activated carbon cathode, the KIHCs can deliver a high energy density of 171.7 Wh kg^-1 at 106.8 W kg^-1 , a superior power density (14027.0 W kg^-1 with 31.2 Wh kg^-1 retained), and ultra-stable lifespan (89.7% retention after 30 K cycles with cycled at 2 A g^-1 ).

A Versatile Strategy for Achieving Fast-Charging Batteries via Interfacial Engineering: Pseudocapacitive Potassium Storage without Nanostructuring

The rapid transport of alkali ions in electrodes is a long-time dream for fast-charging batteries. Though electrode nanostructuring has increased the rate-capability, its practical use is limited because of the low tap density and severe irreversible reactions. Therefore, development of a strategy to design fast-charging micron-sized electrodes without nanostructuring is of significant importance. Herein, a simple and versatile strategy to accelerate the alkali ion diffusion behavior in micron-sized electrode is reported. It is demonstrated that the diffusion rate of K⁺ ions is significantly improved at the hetero-interface between orthorhombic Nb₂ O₅ (001) and monoclinic MoO₂ (110) planes. Lattice distortion at the hetero-interface generates an inner space large enough for the facile transport of K⁺ ions, and electron localization near oxygen-vacant sites further enhances the ion diffusion behavior. As a result, the interfacial-engineered micron-sized anode material achieves an outstanding rate capability in potassium-ion batteries (KIBs), even higher than nanostructured orthorhombic Nb₂ O₅  which is famous for fast-charging electrodes. This is the first study to develop an intercalation pseudocapacitive micron-sized anode without nanostructuring for fast-charging and high volumetric energy density KIBs. More interestingly, this strategy is not limited to K⁺ ion, but also applicable to Li⁺ ion, implying the versatility of interfacial engineering for alkali ion batteries.

An improved bioinspired strategy to construct nitrogen and phosphorus dual-doped network porous carbon with boosted kinetics potassium ion capacitors

Potassium-ion capacitors (PICs) have drawn appreciable attention because PICs can masterly integrate the virtues of the high energy density of battery-type anode and high power density of capacitor-type cathode. However, the sanguine scenario involves the incompatible capacity and sluggish kinetics in the PIC device. Herein, we report the synthesis of nitrogen and phosphorus-doped network porous carbon materials (NPMCs) via a self-sacrifice template strategy, which possesses a desired three-dimensional structure and prosperous electrochemical properties for K⁺ storage capacity. The obtained hierarchical porous carbon delivers a high reversible capacity of 420 mA h g^-1 at 0.05 A g^-1 and good cycling performance owing to its high concentration of reversible carbon defects and strong charge transfer kinetics. As expected, an advanced PIC device was assembled with a working voltage as high as 4.5 V, delivering an extraordinary energy density of 81.6 W h kg^-1 as well as a splendid long life. Systematic characterization analysis combined with density functional theory calculations indicates that the strategy for preparing PIC devices with outstanding performance in this work can provide new insights for the development of PICs for an extensive range of applications.

A Universal Polyiodide Regulation Using Quaternization Engineering toward High Value-Added and Ultra-Stable Zinc-Iodine Batteries

The development of aqueous rechargeable zinc-iodine (Zn-I2 ) batteries is still plagued by the polyiodide shuttle issue, which frequently causes batteries to have inadequate cycle lifetimes. In this study, quaternization engineering based on the concept of "electric double layer" is developed on a commercial acrylic fiber skeleton ($1.55-1.7 kg-1 ) to precisely constrain the polyiodide and enhance the cycling durability of Zn-I2 batteries. Consequently, a high-rate (1 C-146.1 mAh g-1 , 10 C-133.8 mAh g-1 ) as well as, ultra-stable (2000 cycles at 20 C with 97.24% capacity retention) polymer-based Zn-I2 battery is reported. These traits are derived from the strong electrostatic interaction generated by quaternization engineering, which significantly eliminates the polyiodide shuttle issue and simultaneously realizes peculiar solution-based iodine chemistry (I- /I3 - ) in Zn-I2 batteries. The quaternization strategy also presents high practicability, reliability, and extensibility in various complicated environments. In particular, cutting-edge Zn-I2 batteries based on the concept of derivative material (commercially available quaternized resin) demonstrate ≈100% capacity retention over 17 000 cycles at 20 C. This work provides a general and fresh insight into the design and development of large-scale, low-cost, and high-performance zinc-iodine batteries, as well as, other novel iodine storage systems.

Construction of Novel Bimetallic Oxyphosphide as Advanced Anode for Potassium Ion Hybrid Capacitor

Potassium ion hybrid capacitors (PIHCs) have attracted considerable interest due to their low cost, competitive power/energy densities, and ultra-long lifespan. However, the more sluggish insertion kinetics of battery-type anodes than capacitor-type cathodes in PIHCs seriously limits their practical application. Therefore, developing advanced anodes with high capacitor and suitable K⁺ intercalation is imperative and significant. A novel core-shell structure of NiCo oxide/NiCo oxyphosphide (NCOP) nanowires are designed and constructed in this study via efficient and facile strategy. Combining the merits of the core-shell structure and the massive active sites in the oxyphosphide layer, the as-prepared NCOP composites manifest highly reversible capacitors and outstanding rate capability. Meanwhile, the insertion and conversion potassium storage mechanisms of the NCOP are successfully revealed through in situ X-ray diffraction and density functional theory calculations, respectively. Furthermore, the PIHC was assembled with NCOP anode and borocarbonitride cathode, which displays a large energy density and high-power density, along with an exceptional capacity retention of ≈90% over 10 000 cycles at 1.0 A g^-1 . This work provides the anion regulation strategy for modifying the transition metal oxide and constructing the advancing electrode materials for next-generation energy storage and beyond.

Implantation of Fe7S8 nanocrystals into hollow carbon nanospheres for efficient potassium storage

As a desirable candidate for lithium-ion batteries, potassium-ion batteries (PIBs) have aroused great interest because of their low cost and high power and energy densities. However, the insertion/extraction of K⁺ with a large radius (1.38 Å) usually bring about the destruction of the electrode materials. Here, ultrafine Fe₇S₈ nanocrystals are successfully implanted into hollow carbon nanospheres (Fe₇S₈@HCSs) via a facile solvothermal method and subsequent novel low-temperature sulfurization, which avoid the aggregation of Fe₇S₈ nanoparticles produced during high-temperature sulfidation. The ultrafine Fe₇S₈ nanoparticles and hollow carbon spheres can not only buffer the severe expansion/shrinkage of electrode materials caused by the repeated insertion/extraction of K⁺, but also provide additional accessible pathways for the high-rate K⁺ transmission. When tested as an anode material for PIBs, Fe₇S₈@HCSs achieve impressive K⁺ storage capacity of 523.2 mAh g^-1 at 0.1 A g^-1 after 100 cycles and remarkable rate capacity of 176.3 mAh g^-1 at 5 A g^-1. Further, assembling this anode with a K₂NiFe(CN)₆ cathode yields stable cycling performance, revealing its great potential for large-scale energy storage applications.

Recent advances and perspectives of 3D printed micro-supercapacitors: from design to smart integrated devices

3D-printed micro-supercapacitors (MSCs) have emerged as the ideal candidates for energy storage devices owing to their unique characteristics of miniaturization, structural diversity, and integration. Exploring the 3D printing technology for various materials and architectures of MSCs is key to realizing customization and optimizing the performance of 3D-printed MSCs. In this review, we summarize the latest progress in 3D-printed MSCs with regards to general printing approaches, printable materials, and rational design considerations. Specifically, several general types of 3D printing techniques (their working principles, available materials, resolutions, advantages, and disadvantages) and their applications to fabricate electrodes with different energy storage mechanisms, and various electrolytes, are summarized. We further discuss research directions in terms of integrated systems with other electronics. Finally, future perspectives on the research and development directions in this important field are further discussed.

Crystal Facet and Architecture Engineering of Metal Oxide Nanonetwork Anodes for High-Performance Potassium Ion Batteries and Hybrid Capacitors

Metal oxides are considered as prospective dual-functional anode candidates for potassium ion batteries (PIBs) and hybrid capacitors (PIHCs) because of their abundance and high theoretic gravimetric capacity; however, due to the inherent insulating property of wide band gaps and deficient ion-transport kinetics, metal oxide anodes exhibit poor K⁺ electrochemical performance. In this work, we report crystal facet and architecture engineering of metal oxides to achieve significantly enhanced K⁺ storage performance. A bismuth antimonate (BiSbO₄) nanonetwork with an architecture of perpendicularly crossed single crystal nanorods of majorly exposed (001) planes are synthesized via CTAB-mediated growth. (001) is found to be the preferential surface diffusion path for superior adsorption and K⁺ transport, and in addition, the interconnected nanorods gives rise to a robust matrix to enhance electrical conductivity and ion transport, as well as buffering dramatic volume change during insertion/extraction of K⁺. Thanks to the synergistic effect of facet and structural engineering of BiSbO₄ electrodes, a stable dual conversion-alloying mechanism based on reversible six-electron transfer per formula unit of ternary metal oxides is realized, proceeding by reversible coexistence of potassium peroxide conversion reactions (KO₂↔K₂O) and Bi_xSb_y alloying reactions (BiSb ↔ KBiSb ↔ K₃BiSb). As a result, BiSbO₄ nanonetwork anodes show outstanding potassium ion storage in terms of capacity, cycling life, and rate capability. Finally, the implementation of a BiSbO₄ nanonetwork anode in the state-of-the-art full cell configuration of both PIBs and PIHCs shows satisfactory performance in a Ragone plot that sheds light on their practical applications for a wide range of K⁺-based energy storage devices. We believe this study will propose a promising avenue to design advanced hierarchical nanostructures of ternary or binary conversion-type materials for PIBs, PIHCs, or even for extensive energy storage.

Recent Advances and Perspectives of Battery-Type Anode Materials for Potassium Ion Storage

Potassium ion energy storage devices are competitive candidates for grid-scale energy storage applications owing to the abundancy and cost-effectiveness of potassium (K) resources, the low standard redox potential of K/K⁺, and the high ionic conductivity in K-salt-containing electrolytes. However, the sluggish reaction dynamics and poor structural instability of battery-type anodes caused by the insertion/extraction of large K⁺ ions inhibit the full potential of K ion energy storage systems. Extensive efforts have been devoted to the exploration of promising anode materials. This Review begins with a brief introduction of the operation principles and performance indicators of typical K ion energy storage systems and significant advances in different types of battery-type anode materials, including intercalation-, mixed surface-capacitive-/intercalation-, conversion-, alloy-, mixed conversion-/alloy-, and organic-type materials. Subsequently, host-guest relationships are discussed in correlation with the electrochemical properties, underlying mechanisms, and critical issues faced by each type of anode material concerning their implementation in K ion energy storage systems. Several promising optimization strategies to improve the K⁺ storage performance are highlighted. Finally, perspectives on future trends are provided, which are aimed at accelerating the development of K ion energy storage systems.

Boosting the K+-adsorption capacity in edge-nitrogen doped hierarchically porous carbon spheres for ultrastable potassium ion battery anodes

Although carbon materials have great potential for potassium ion battery (KIB) anodes due to their structural stability and abundant carbon-containing resources, the limited K⁺-intercalated capacity impedes their extensive applications in energy storage devices. Current research studies focus on improving the surface-induced capacitive behavior to boost the potassium storage capacity of carbon materials. Herein, we designed edge-nitrogen (pyridinic-N and pyrrolic-N) doped carbon spheres with a hierarchically porous structure to achieve high potassium storage properties. The electrochemical tests confirmed that the edge-nitrogen induced active sites were conducive for the adsorption of K⁺, and the hierarchical porous structure promoted the generation of stable solid electrolyte interphase (SEI) films, both of which endow the resulting materials with a high reversible capacity of 381.7 mA h g^-1 at 0.1 A g^-1 over 200 cycles and an excellent rate capability of 178.2 mA h g^-1 at 5 A g^-1. Even at 5 A g^-1, the long-term cycling stability of 5000 cycles was achieved with a reversible capacity of 190.1 mA h g^-1. This work contributes to deeply understand the role of the synergistic effect of edge-nitrogen induced active sites and the hierarchical porous structure in the potassium storage performances of carbon materials.

Ultra-High Sulfur-Doped Hierarchical Porous Hollow Carbon Sphere Anodes Enabling Unprecedented Durable Potassium-Ion Hybrid Capacitors

Sulfur doping is a promising path to ameliorate the kinetics of carbon-based anodes. However, the similar electronegativity of sulfur and carbon and the poor thermal stability of sulfur severely restrict the development of high-sulfur-content carbon-based anodes. In this work, ultra-high sulfur-doped hierarchical porous hollow carbon spheres (SHCS) with a sulfur content of 6.8 at % are synthesized via a direct high-temperature sulfur-doping strategy. An SHCS has sulfur bonded to the carbon framework including C-S-C and C-SO_x-C, which enlarges its interlayer distance (0.411 nm). In the K half-cell, benefiting from the considerable content and the reasonable architecture of sulfur, the SHCS exhibits significantly improved reversible specific capacity, initial Coulombic efficiency, and cyclability than hierarchical porous hollow carbon spheres without sulfur. Remarkably, the potassium ion hybrid capacitor device fabricated with the SHCS anode achieves excellent energy/power density (135.6 W h kg^-1/17.7 kW kg^-1) and unprecedented durability over 26,000 cycles at 2 A g^-1. This research provides a superior strategy to design high-sulfur-content carbon-based anodes with excellent potassium storage performance.

Preparation of Graphene Oxide/La2Ti2O7 Composites with Enhanced Electrochemical Performances for Supercapacitors

A series of graphene oxide (GO)/lanthanum titanate (La2Ti2O7, LTO) fiber composites were prepared through a hydrothermal method. The LTO fibers were homogeneously dispersed between the GO sheets. The structure and micromorphology of the GO/LTO composites were systematically studied. The composite exhibited a high specific capacitance of 900.6 F g-1 at a current density of 1 A g-1 in the 1 M H2SO4 and 10 wt % sucrose aqueous solution as the electrolyte. With the extended potential window of 1.8 V, the fabricated asymmetric supercapacitor device delivered a maximum energy density of 94.0 Wh kg-1 at a power density of 750.1 W kg-1. The GO/LTO composites could be promising materials for energy storage.

Facile synthesis of porous MoS2nanofibers for efficient drug delivery and cancer treatment

Porous MoS₂nanofibers were synthesized by electroplating and post-annealing and applied in a responsive drug delivery system. The one-dimensional (1D) MoS₂nanofibers displayed a high specific surface area, controllable morphology, and uniform size, serving as a promising drug carrier for chemotherapy. After surface modification with polyethylene glycol (PEG) through PEGylation, the MoS₂/PEG composite displayed excellent physical/chemical stability and biocompatibility. More importantly, MoS₂/PEG loaded with doxorubicin (DOX) exhibited a controllable release responsive to pH and near-infrared (NIR) irradiation and demonstrated precise DOX dose release. Such remarkable anticancer effects were mainly attributed to outstanding photothermal performance and stability of porous MoS₂nanofibers. This work offered a new opportunity of employing porous MoS₂nanofibers as drug carriers for effective cancer chemotherapy.

Recent Advances on MOF Derivatives for Non-Noble Metal Oxygen Electrocatalysts in Zinc-Air Batteries

Oxygen electrocatalysts are of great importance for the air electrode in zinc-air batteries (ZABs). Owing to the high specific surface area, controllable pore size and unsaturated metal active sites, metal-organic frameworks (MOFs) derivatives have been widely studied as oxygen electrocatalysts in ZABs. To date, many strategies have been developed to generate efficient oxygen electrocatalysts from MOFs for improving the performance of ZABs. In this review, the latest progress of the MOF-derived non-noble metal-oxygen electrocatalysts in ZABs is reviewed. The performance of these MOF-derived catalysts toward oxygen reduction, and oxygen evolution reactions is discussed based on the categories of metal-free carbon materials, single-atom catalysts, metal cluster/carbon composites and metal compound/carbon composites. Moreover, we provide a comprehensive overview on the design strategies of various MOF-derived non-noble metal-oxygen electrocatalysts and their structure-performance relationship. Finally, the challenges and perspectives are provided for further advancing the MOF-derived oxygen electrocatalysts in ZABs.