High-Valence Oxides for High Performance Oxygen Evolution Electrocatalysis

Electronic and surface engineering of Mn active sites by femtosecond lasers: enhancing catalytic performance for seawater electrolysis through Mn4+-OH- layers

Laser-induced modifications of La0.51Sr0.49MnO3 (LSMO) perovskite electrocatalysts are explored for enhanced seawater oxidation under alkaline conditions. Femtosecond (FS) laser treatment stabilizes Mn in the high oxidation state (Mn4+), significantly altering the electronic structure and surface morphology of the catalyst. These changes lead to increased covalency between the Mn d-band and O 2p orbitals, facilitating efficient charge transfer and lowering activation barriers for oxygen evolution reaction (OER) intermediates. Laser treatment also induces a porous, roughened surface, enhancing active site density, hydrophilicity, and ion exchange, while minimizing Jahn-Teller distortions to further stabilize the catalyst during the OER. Additionally, the formation of a robust hydroxide layer protects against corrosive species in seawater, ensuring long-term durability. These combined effects result in significantly improved OER kinetics, selectivity, and stability, positioning laser-treated LSMO (LT-LSMO) as a promising candidate for direct seawater electrolysis applications.

Perovskite Catalysts for Pure-Water-Fed Anion-Exchange-Membrane Electrolyzer Anodes: Co-design of Electrically Conductive Nanoparticle Cores and Active Surfaces

Anion-exchange-membrane water electrolyzers (AEMWEs) are a possible low-capital-expense, efficient, and scalable hydrogen-production technology with inexpensive hardware, earth-abundant catalysts, and pure water. However, pure-water-fed AEMWEs remain at an early stage of development and suffer from inferior performance compared with proton-exchange-membrane water electrolyzers (PEMWEs). One challenge is to develop effective non-platinum-group-metal (non-PGM) anode catalysts and electrodes in pure-water-fed AEMWEs. We show how LaNiO3-based perovskite oxides can be tuned by cosubstitution on both A- and B-sites to simultaneously maintain high metallic electrical conductivity along with a degree of surface reconstruction to expose a stable Co-based active catalyst. The optimized perovskite, Sr0.1La0.9Co0.5Ni0.5O3, yielded pure-water AEMWEs operating at 1.97 V at 2.0 A cm-2 at 70 °C with a pure-water feed, thus illustrating the utility of the catalyst design principles.

Constructing Stable Bifunctional Electrocatalyst of Co─Co2Nb5O14 with Reversible Interface Reconstitution Ability for Sustainable Zn-Air Batteries

Transition metal and metal oxide heterojunctions have been widely studied as bifunctional oxygen reduction/evolution reaction (ORR/OER) electrocatalysts for Zn-air batteries, but the dynamic changes of transition metal oxides and the interface during catalysis are still unclear. Here, bifunctional electrocatalyst of Co─Co2Nb5O14 is reported, containing lattice interlocked Co nanodots and Co2Nb5O14 nanorods, which construct a strong metal-support interaction (SMSI) interface. Unlike the recognition that transition metals mainly serve as ORR active sites and metal oxides as OER active sites, it is found that both ORR/OER sites originate from Co2Nb5O14, while Co acts as an electronic regulatory unit. The SMSI interface promotes dynamic electron transfer between Co/Co2Nb5O14, and the reversible active sites of Nb4+/Nb5+ realize bidirectional adsorption/migration of intermediates, thereby achieving dynamic reversible interface reconstitution. The electrocatalyst shows a high ORR half-wave potential of 0.84 V, a low OER overpotential of 296.3 mV, and great cycling stability over 30000 s. The ZAB shows a high capacity of 850.6 mA h·gZn-1 and can stably run 2050 cycles at 10 mA·cm⁻2. Moreover, the constructed solid-state ZAB also shows leading cycling stability in comparison with the previous studies.

Highly Stable Bifunctional Heterostructured Electrocatalyst Integrated with LDPE-Derived Spherical Carbon for Longevous Alkaline Seawater Splitting

The development of innovative electrocatalysts for seawater splitting shows great potential for large-scale green energy. Specifically, interface engineering plays a vital role in improving surface properties and charge transfer. However, seawater electrolysis encounters considerable challenges like chloride-induced corrosion, impurities, and microorganisms that hinder efficiency. Herein, we design a highly durable electrocatalyst based on selenium-enriched NiMn-Sx  supported on low-density polyethylene-derived spherical carbon-Ni foam (Se-NiMnSx@SC/NF) using combination of pyrolysis and hydrothermal processes. The resulting Se-NiMnSx@SC/NF bifunctional catalyst with hollow cycas cone structure exhibited exceptional electrochemical performance and corrosion resistance in alkaline seawater with an ultralow overpotential of 146 and 262 mV for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) to achieve a large current density of 500 mA cm⁻2. In a simulated alkaline seawater splitting setup, the Se-NiMnSx@SC/NF catalyst maintained a cell voltage of 2.07 V at 500 mA cm⁻2, demonstrating outstanding durability for over 100 h with ≈100% Faradaic efficiency. Se and S doping in the heterostructured electrocatalyst refines the electronic structure and boosts reaction kinetics, while the hollow cycas cone design increases the exposure of active sites. Additionally, the carbon layer provided strong resistance to seawater corrosion, making Se-NiMnSx@SC/NF an excellent bifunctional catalyst for alkaline seawater electrolysis.

Fe doping intensifies the built-in electric field for tailoring the reconstruction of sulfides towards efficient oxygen evolution

The traditional view of sulfides as stable active centers has hindered the development of a clear structure-activity relationship and the rational design of high-performance oxygen evolution reaction (OER) catalysts. In this study, we focus on regulating sulfide reconstruction and have synthesized a Fe-Ni3S4/Cr2O3 pre-catalyst. Under the combined influence of the built-in electric field (BIEF) at the heterogeneous interface and Fe doping, both the sulfide reconstruction process and the electronic structure of the reconstructed product, namely Fe-NiOOH, were effectively tuned. The enhanced BIEF induced by Fe doping generated electron-rich regions on the sulfide surface, stabilizing the reconstruction process. Fe doping into the sulfide induced the incorporation of Fe into NiOOH, modulating the electronic states near the Fermi level of the metal-oxygen bond and subsequently activating the lattice oxygen mediated mechanism (LOM) of Fe-NiOOH, which serves as the true active center. Additionally, the BIEF optimized OH- diffusion dynamics and the energy consumption of hydroxyl deprotonation, reducing the energy barrier of the rate-limiting step of the LOM process, further enhancing OER activity. Remarkably, Fe-Ni3S4/Cr2O3 demonstrated excellent OER activity and commercial viability. This work offers a new perspective on the regulation of reconstruction products of pre-catalyst, providing fresh insights for the design of efficient OER catalysts.

High-entropy layered double hydroxide with advanced structural regulation for electrochemical water splitting

Electrochemical water splitting (EWS) serves as a pivotal technology for green hydrogen production. However, its practical application is limited by the high cost and scarcity of noble metal-based catalysts. High-entropy layered double hydroxides (HE-LDHs) have emerged as a novel class of high-entropy materials attracting significant attention for their exceptional electrocatalytic performance. Compared with traditional bimetallic layered double hydroxides, HE-LDHs possess unique configurational entropy and "four core effects" (high-entropy effect, delayed diffusion effect, lattice distortion effect, and cocktail effect). In this review, we firstly introduced the concept of HE-LDHs and summarized their different synthesis methods such as the hydrothermal method, co-precipitation method, electrodeposition method and template etching method. Then, we presented advanced regulation strategies of HE-LDHs, including geometric structure design, single-atom doping, inert component doping and vacancy creation. Finally, we further explored the current important challenges and corresponding solutions to promote the practical development of HE-LDH catalysts.

Microenvironment-Engineered Multilayered Electrode Design for Sustainable Seawater Oxidation

The reliance on high-purity water for hydrogen production increases the strain on freshwater resources. Direct seawater electrolysis is a promising alternative but is impeded by complex challenges such as chloride-induced corrosion and electrode surface fouling. Herein, a microenvironment-engineered, multilayered electrode design for sustainable seawater electrolysis is presented, utilizing the strategic integration of carbonate (CO₃2⁻) Lewis base sites anchored on a Cobalt layered double hydroxides (Co LDH) embedded within a NiBOx nanostructure supported by a Ni(OH)₂/NF microarray. Incorporating boron into the Ni-OOH matrix forms a protective metaborate film, preventing metal dissolution and non-conductive oxide formation, thereby enhancing current collector corrosion resistance in saline seawater conditions. The CO₃2⁻ Lewis base covalently functionalized on Co-active sites, establishes a dynamic interaction that continuously splits water molecules while sequestering H⁺ ions, generating a localized acidic microenvironment. This acidification enhances OER kinetics and protects against chloride attack and precipitate formation, addressing key stability and efficiency barriers in direct seawater electrolysis. The advanced anode design achieves an industrially viable current density of 1.0 A cm⁻2 at 1.65 V under standard conditions, marking a significant step toward scalable, desalination-free hydrogen production directly from seawater.

Oxygen Vacancies Can Drive Surface Transformation of High-Entropy Perovskite Oxide for the Oxygen Evolution Reaction as Probed with Scanning Probe Microscopy

Epitaxial transition-metal oxide perovskite catalysts form a highly active catalyst class for the oxygen evolution reaction (OER). Understanding the origin of chemical dissolution and surface transformations during the OER is important to rationally design effective catalyst. These changes arise from complex interactions involving dynamic restructuring and electronic/structural adaptations. Although initial instability is common, surfaces can reach equilibrium through chemical transformations. High entropy perovskite oxides (HEPOs), which incorporate multiple 3d metal cations in near-equimolar ratios, have emerged as promising catalysts due to their enhanced OER activity compared to single-cation variants, attributed to their high configurational entropy and compositional flexibility. To advance HEPO catalyst applications, understanding the mechanisms governing their surface (in)stability is important. In this work, we examine surface degradation in epitaxial La(Cr,Mn,Fe,Co,Ni)O3-δ thin films before and after OER using complementary scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). STM reveals tip-induced degradation of as-grown films under positive bias, attributed to oxygen anion removal and charge trapping-induced lattice degradation, demonstrating its utility as a probe for surface stability dynamics. Post-OER XPS analysis shows irreversible surface transformations from the initial epitaxial phase, characterized by 3d-metal leaching and formation of La and d-metal (oxy)hydroxides. Our findings indicate that oxygen vacancies and lattice strain trigger structural breakdown in these multi-cation perovskite surfaces during the OER, leading to surface restructuring and diminished catalytic performance compared to the as-grown epitaxial HEPO phase. This work identifies oxygen leaching as the likely primary driver of surface transformation during the OER. We show that STM offers an important tool to probe the transformation even before operando conditions, which can find use in similar material studies.

Smart Compositional Design of B-Site Ordered Double Perovskite for Advanced Oxygen Catalysis at Ultra-High Current Densities

Perovskite oxides have been considered promising oxygen catalysts for oxygen reduction and evolution reactions (ORR and OER), owing to structural and compositional flexibility, and tailorable properties. Ingenious B-site ordered La1.5Sr0.5NiMn0.5Fe0.5O6 (LSNMF) double perovskite is strategically designed by simultaneously interposing Ni0.5Mn0.5 and Ni0.5Fe0.5 into B' and B″ sites. Controlling B-site cation systematically tailors the electronic structure of the B-site cation with a d-band center (Md) upshift close to the Fermi level, increasing the overlap of the Md center and O 2p center (OP). The strong interaction of Md and Op facilitates the adsorption of oxygen and activates the lattice oxygen to participate in the OER process, thereby enhancing the ORR and OER activity. For ORR, LSNMF exhibited an onset potential of 0.9 V along with a high limiting current of -8.05 mA cm-2. At the same time, for OER at 1 m KOH, LSNMF effectively reached a maximum current density of 3000 mA cm-2. Most importantly, the difference between EORR (at -1 mA cm-2) and EOER (at 10 mA cm-2), ΔE is 0.69 V, which stands among the best of recently reported perovskites. The as-designed LSNMF is stable, efficient, lucrative, and a promising candidate for practical application.

Probing Under-Utilized Melem as Host Scaffold with Strategic Modulation of Cobalt Oxidation State to Accelerate Alkaline Water Splitting

The potential of cobalt catalysts for sustainable, carbon-neutral hydrogen production through water splitting can be fully achieved by fundamental understanding-driven strategic tuning of metal oxidation states on a uniform scaffold. In pursuit of a stable scaffold that can enhance electrocatalytic activity through metal-N synergism and envisaging that g-C3N4 has inherited its properties from its structurally distinct predecessor, Melem; a comprehensive exploration of s-heptazine (Melem, M) is furnished as host for strategic tuning of cobalt electrocatalysts having variable oxidation states. Co(II)-doped heptazine (CoII@M) catalyzed oxygen evolution reaction (OER) with an overpotential of 302 mV achieving 50 mA cm-2 current density, with minimal charge-transfer resistance (0.41 Ω). Co(0)-doped heptazine nanotube (Co0@M) facilitated the arduous H-O-H bond cleavage for alkaline hydrogen evolution reaction (HER), achieving 50 mA cm-2 current density at 206 mV overpotential, with low charge-transfer resistance of 0.66 Ω, attesting to the scaffold's assistance to electron transfer. The CoII@M||Co0@M assembly shows low cell voltage (1.637 V @ 10 mA cm-2) and promising stability (114 h) for total water splitting. s-heptazine scaffold ensured finer dispersion and stabilization of cobalt active sites in a corrosive environment. The scaffold's substantial stability, attributes to its nitrogen-rich core and extensive H-bonding, unlocks the potential of under-explored melem-based systems for electrocatalytic applications.

Introducing different long-chain flexible ligands to regulate the transformation behavior of NiFe-MOF and as bifunctional catalysts for the HER/OER

The investigation of highly efficient metal-organic framework (MOF) electrocatalysts represents a pivotal challenge in enhancing the overall efficiency of water electrolysis. In this study, we present a co-liganding method based on molecular regulation, in which succinic (s.a), adipic (a.a), and decanedioic (d.a) acids are employed to modify the original ligand H2BDC-based bimetallic NiFe-MOF to obtain dual-ligand NiFe-MOF electrocatalysts with excellent OER and HER performance (NiFe-MOF s.a, NiFe-MOF a.a, and NiFe-MOF d.a). Notably, NiFe-MOF d.a performs the best, particularly in 1 M KOH solution, with an OER overpotential of 242 mV and an HER overpotential of 116 mV at a current density of 10 mA cm-2, and it demonstrates excellent stability under alkaline conditions, outperforming several recently reported Fe/Co/Ni-based catalysts. Bader charge and Mulliken charge calculations alongside experimental characterization data indicate that long-chain dicarboxylate ligands can influence the morphology, oxygen vacancy formation, and electronic structure of NiFe-MOFs. XPS and XRD analyses after the OER reveal that the four NiFe-MOFs undergo structural reorganization, with NiFe-MOF d.a having more unsaturated metal sites and more oxygen vacancies, promoting greater conversion of the MOF to NiOOH and FeOOH, which is beneficial for improving the OER performance. The density of states (DOS) results from DFT calculations demonstrate that the d-band center of NiFe-MOF d.a is relatively low, indicating that the adsorption energy of H* is reduced, which can promote the release of H2. Furthermore, the hydrogen adsorption free energy (ΔGH*) values of the Fe and Ni active sites within NiFe-MOF d.a are closer to zero, thus accelerating the HER kinetics. This work paves new pathways for realizing dual-ligand MOFs.

High-Entropy Selenides with Tunable Lattice Distortion as Efficient Electrocatalysts for Oxygen Evolution Reaction

Developing stable and active electrocatalysts is crucial for enhancing the oxygen evolution reaction (OER) efficiency, which sluggish kinetics hinder sustainable hydrogen production. High entropy selenides (HESes) feature with random distribution of multiple metals cations and unique electronic and size effect of Se anion, allowing for precious regulation of their catalytic properties towards high OER activity. In this work, we report a series of high-entropy selenides catalysts with tunable lattice strain for electrocatalytic oxygen evolution. Electrochemical measurements show that the quinary (NiCoMnMoFe)Sex requires only 291 mV to reach 10 mA cm-2 and exhibits a superior stability with negligible current decay during 100 h's continuous operation. By combining experimental measurements and theoretical calculation, the study reveals that the lattice distortion, reflected by the local microstrain near the active site, plays a vital role in boosting the OER activity of HESes.

Coupling Built-in Electric Field and Lewis Acid Triggers the Lattice Oxygen-Mediated Mechanism for Efficient Water Oxidation

The oxygen evolution reaction catalyst triggering lattice oxygen-mediated mechanism (LOM) can break the activity limitation imposed by the adsorbate evolution mechanism scaling relationship. However, triggering LOM is challenging due to the thermodynamic disadvantages associated with lattice oxygen redox reactions. Here, a Lewis acid-modified layered double hydroxides (LDH) heterojunction catalyst (LDH/Cr2O3) is designed. The asymmetric charge distribution at the heterojunction interface, induced by the built-in electric field, shifts the electron transfer center from the lower Hubbard band to non-bonding oxygen, thereby activating LOM. The enrichment of OH- and the enhanced covalency of the metal-oxygen bond by Lewis acid optimize the pH-dependent and high-energy consumption during the hydroxyl (OH*) deprotonation process of LOM. Furthermore, the activation of lattice oxygen and accelerated OH* deprotonation facilitate the surface reconstruction of LDH. Consequently, the LDH/Cr2O3 exhibits excellent catalytic activity, with an overpotential of only 237 mV (at 10 mA cm-2) in 1.0 m KOH electrolyte. The catalyst maintains excellent activity in simulated seawater and 0.1 m KOH electrolyte. Furthermore, it demonstrates outstanding practical functionality, as the assembled commercial-scale alkaline electrolyzer operates stably for 50 h. This work may provide new approaches and theoretical insights for triggering and optimizing LOM.

Ferrocyanide "Skin"-Mediated Anticatalysis: Mitigating Self-Discharge in Aqueous Electrochemical Devices

The interest in aqueous energy storage devices is surging due to their exceptional safety profile. However, in aqueous energy storage systems, interfacial side reactions, predominantly attributed to the oxygen evolution reaction (OER), result in significant self-discharge, which is concomitant with the deterioration of both voltage and capacity. Herein, we propose the construction of a ferrocyanide "skin" on transition metal compounds (TMCs) to mitigate this issue. This engineered "skin" creates Fe-C≡N terminations, initiating a new reaction pathway featured by the bonding process of N-O and N-H bonds. This reaction pathway presents a significant energy barrier, effectively shielding the active sites for the OER from H2O molecules and hydroxyl ions. Taking NiO as an example, the ferrocyanide "skin" effectively suppresses the undesired phase transition from NiOOH to Ni(OH)2 during the idling process of a fully charged electrode, enabling the as-modified electrode to achieve a remarkable voltage retention of 80.0% after 1 week of idling within a device. Furthermore, this concept demonstrates extensive applicability, extending to a range of TMC materials, including but not limited to manganese oxide, vanadium oxide, and nickel cobalt oxide. These findings highlight the efficacy of the ferrocyanide "skin" design strategy as a broadly applicable paradigm for suppressing H2O-induced undesirable phase transitions in aqueous energy storage devices.

Cerium Oxide-Induced Synchronous Lattice Oxygen Activation and Accelerated Deprotonation Kinetics in Cobalt (oxy)Hydroxide for Robust Water Oxidation

Theoretically, triggering the lattice oxygen mechanism (LOM) of the catalysts during the alkaline oxygen evolution reaction (OER) can effectively break through the thermodynamic limitations, while following this path, the rate of simultaneous deprotonation also determines the overall kinetics. A cerium oxide units-modified cobalt (oxy)hydroxide nanocomposite of CeO2-CoOOH/NF is proposed, where the Ce(4f)-O(2p)-Co (3d) coupling with sites interaction mediates the Co─O Mott-Hubbard splitting state to trigger efficient LOM. Meanwhile, the 4f orbital electron-rich state near the Fermi level is favorable for proceeding the electron-involved deprotonation behavior. All these empower CeO2-CoOOH/NF with considerable OER activity, which delivers an overpotential of 249 mV at 10 mA cm-2, and coupling with commercial Pt/C in anion exchange membrane water electrolyze (AEMWE) to realize energy-saving hydrogen production. This work is instructive for the design of high-performance OER catalysts through controlling the electron orbitals hybridization state of the catalysts to synchronously accelerate the kinetics of each link in OER.

Co-MOF-derived carbon nanomaterials with size-controlled FeCo alloys for oxygen evolution

A porous carbon material with size-controlled FeCo alloys and carbon nanotubes (CNTs) was obtained from pyrolysis of a Co-based metal-organic framework (MOF), followed by the Fe3+-etching process and CNT growth. This catalyst (CoOF-1-FeCoNC-CNT) displayed satisfactory OER activity, attributed to its large specific surface area, improved electrical conductivity, and the synergistic effect of the bimetallic FeCo alloy.

Enhancing Oxygen Evolution Catalysis by Tuning the Electronic Structure of NiFe-Layered Double Hydroxides Through Selenization

Electrocatalytic water splitting is a critical approach for achieving carbon neutrality, playing an essential role in clean energy conversion. However, the slow kinetics of the oxygen evolution reaction (OER) remains a major bottleneck hindering energy conversion efficiency. Although noble metal catalysts (e.g., IrO2 and RuO2) show excellent catalytic activity, their high cost and scarcity limit their applicability in large-scale industrial processes. In this study, we introduce a novel electrocatalyst based on selenized NiFe-layered double hydroxides (NiFe-LDHs), synthesized via a simple hydrothermal method. Its key innovation lies in the selenization process, during which Ni atoms lose electrons to form selenides, while selenium (Se) gains electrons. This leads to a significant increase in the concentration of high-valent metal ions, enhances electronic mobility, and improves the structural stability of the catalyst through the formation of Ni-Se bonds. Experimental results show that selenized NiFe-LDHs exhibit excellent electrocatalytic performance in 1 M KOH alkaline solution. In the oxygen evolution reaction (OER), the catalyst achieved an ultra-low overpotential of 286 mV at a current density of 10 mA cm⁻2, with a Tafel slope of 63.6 mV dec⁻1. After 60 h of continuous testing, the catalyst showed almost no degradation, far outperforming conventional catalysts. These results highlight the potential of NiFe-LDH@selenized catalysts in large-scale industrial water electrolysis applications, providing an effective solution for efficient and sustainable clean energy production.

Enhancing the Kinetics of Glucose Electro-Oxidation by Modulating the Binding Energy of Hydroxyl on Cobalt-Based Catalysts

Replacing the sluggish anodic water oxidation reaction with the glucose oxidation reaction (GOR) offers an energy-saving strategy to obtain value-added products during the hydrogen production process. However, rational design of the GOR electrocatalyst with an explicit structure-property relationship remains a challenge. In this study, by using cobalt chalcogenides as model catalysts, we performed an in-depth study of the GOR catalytic mechanism of CoS and CoSe nanosheets. Experimental and theoretical results revealed that the reaction pathway on cobalt chalcogenides strongly depends on their binding energy to hydroxyl (OHBE). For CoS with a weak OHBE, the reaction proceeds through an "electrophilic oxygen" route. While for CoSe, due to the strong OHBE, a surface reconstruction occurs before the GOR and therefore follows the "electrochemical-chemical" route. Inspired by these findings, a customized strategy was proposed to regulate the OHBE of the catalysts, which involved introducing F atoms into CoS to enhance its OHBE, and weakening the OHBE of CoSe by doping with Zn atoms. The optimized F-doped CoS and Zn-doped CoSe catalysts both exhibited significantly improved performance for GOR. This study thus provides a verifiable paradigm for improving the GOR performance via a customized strategy and sheds light on the design of novel catalysts in the future.

Recent Progress in Balancing the Activity, Durability, and Low Ir Content for Ir-Based Oxygen Evolution Reaction Electrocatalysts in Acidic Media

Proton exchange membrane (PEM) electrolysis faces challenges associated with high overpotential and acidic environments, which pose significant hurdles in developing highly active and durable electrocatalysts for the oxygen evolution reaction (OER). Ir-based nanomaterials are considered promising OER catalysts for PEM due to their favorable intrinsic activity and stability under acidic conditions. However, their high cost and limited availability pose significant limitations. Consequently, numerous studies have emerged aimed at reducing iridium content while maintaining high activity and durability. Furthermore, the research on the OER mechanism of Ir-based catalysts has garnered widespread attention due to differing views among researchers. The recent progress in balancing activity, durability, and low iridium content in Ir-based catalysts is summarized in this review, with a particular focus on the effects of catalyst morphology, heteroatom doping, substrate introduction, and novel structure development on catalyst performance from four perspectives. Additionally, the recent mechanistic studies on Ir-based OER catalysts is discussed, and both theoretical and experimental approaches is summarized to elucidate the Ir-based OER mechanism. Finally, the perspectives on the challenges and future developments of Ir-based OER catalysts is presented.

Defect Engineering of Metal-Based Atomically Thin Materials for Catalyzing Small-Molecule Conversion Reactions

Recently, metal-based atomically thin materials (M-ATMs) have experienced rapid development due to their large specific surface areas, abundant electrochemically accessible sites, attractive surface chemistry, and strong in-plane chemical bonds. These characteristics make them highly desirable for energy-related conversion reactions. However, the insufficient active sites and slow reaction kinetics leading to unsatisfactory electrocatalytic performance limited their commercial application. To address these issues, defect engineering of M-ATMs has emerged to increase the active sites, modify the electronic structure, and enhance the catalytic reactivity and stability. This review provides a comprehensive summary of defect engineering strategies for M-ATM nanostructures, including vacancy creation, heteroatom doping, amorphous phase/grain boundary generation, and heterointerface construction. Introducing recent advancements in the application of M-ATMs in electrochemical small molecule conversion reactions (e.g., hydrogen, oxygen, carbon dioxide, nitrogen, and sulfur), which can contribute to a circular economy by recycling molecules like H2, O2, CO2, N2, and S. Furthermore, a crucial link between the reconstruction of atomic-level structure and catalytic activity via analyzing the dynamic evolution of M-ATMs during the reaction process is established. The review also outlines the challenges and prospects associated with M-ATM-based catalysts to inspire further research efforts in developing high-performance M-ATMs.

Ir-O-Mn embedded in porous nanosheets enhances charge transfer in low-iridium PEM electrolyzers

Using metal oxides to disperse iridium (Ir) in the anode layer proves effective for lowering Ir loading in proton exchange membrane water electrolyzers (PEMWE). However, the reported low-Ir-based catalysts still suffer from unsatisfying electrolytic efficiency and durability under practical industrial working conditions, mainly due to insufficient catalytic activity and mass transport in the catalyst layer. Herein we report a class of porous heterogeneous nanosheet catalyst with abundant Ir-O-Mn bonds, achieving a notable mass activity of 4 A mgIr-1 for oxygen evolution reaction at an overpotential of 300 mV, which is 150.6 times higher than that of commercial IrO2. Ir-O-Mn bonds are unraveled to serve as efficient charge-transfer channels between in-situ electrochemically-formed IrOx clusters and MnOx matrix, fostering the generation and stabilization of highly active Ir3+ species. Notably, Ir/MnOx-based PEMWE demonstrates comparable performance under 10-fold lower Ir loading (0.2 mgIr cm-2), taking a low cell voltage of 1.63 V to deliver 1 A cm-2 for over 300 h, which positions it among the elite of low Ir-based PEMWEs.

Fluorine-Lodged High-Valent High-Entropy Layered Double Hydroxide for Efficient, Long-Lasting Zinc-Air Batteries

Efficient and stable bifunctional oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts are urgently needed to unlock the full potential of zinc-air batteries (ZABs). High-valence oxides (HVOs) and high entropy oxides (HEOs) are suitable candidates for their optimal electronic structures and stability but suffer from demanding synthesis. Here, a low-cost fluorine-lodged high-valent high-entropy layered double hydroxide (HV-HE-LDH) (FeCoNi2F4(OH)4) is conveniently prepared through multi-ions co-precipitation, where F- are firmly embedded into the individual hydroxide layers. Spectroscopic detections and theoretical simulations reveal high valent metal cations are obtained in FeCoNi2F4(OH)4, which enlarge the energy band overlap between metal 3d and O 2p, enhancing the electronic conductivity and charge transfer, thus affording high intrinsic OER catalytic activity. More importantly, the strengthened metal-oxygen (M-O) bonds and stable octahedral geometry (M-O(F)6) in FeCoNi2F4(OH)4 prevent structural reorganization, rendering long-term catalytic stability. Furthermore, an efficient three-phase reaction interface with fast oxygen transportation was constructed, significantly improving the ORR activity. ZABs assembled with FeCoNi2F4(OH)4@HCC (hydrophobic carbon cloth) cathodes deliver a top performance with high round-trip energy efficiency (61.3 % at 10 mA cm-2) and long-term stability (efficiency remains at 58.8 % after 1050 charge-discharge cycles).

Structure-Activity Relationships in Oxygen Electrocatalysis

Oxygen electrocatalysis, as the pivotal circle of many green energy technologies, sets off a worldwide research boom in full swing, while its large kinetic obstacles require remarkable catalysts to break through. Here, based on summarizing reaction mechanisms and in situ characterizations, the structure-activity relationships of oxygen electrocatalysts are emphatically overviewed, including the influence of geometric morphology and chemical structures on the electrocatalytic performances. Subsequently, experimental/theoretical research is combined with device applications to comprehensively summarize the cutting-edge oxygen electrocatalysts according to various material categories. Finally, future challenges are forecasted from the perspective of catalyst development and device applications, favoring researchers to promote the industrialization of oxygen electrocatalysis at an early date.

Pumping Electrons from Oxygen-Bridged Cobalt for Low-Charging-Voltage Zn-Air Batteries

Reducing the charging voltage is a prerequisite for improving the chargeability and energy efficiency of Zn-air batteries (ZABs). Herein, Fe3+ pumps electrons from oxygen-bridged cobalt (Fe-O-Co) and induces the accelerated charging kinetics. For the liquid ZABs, a charging voltage of around 1.94 V at 10 mA cm-2 was displayed, which slightly increased 2% after continuous cycles for 180 h. A steady charging voltage of around 1.87 V at 10 mA cm-2 was also exhibited for quasi-solid-state ZABs. Control experiments and characterization show that the interactions between the O2- and Fe3+ sites are relatively weaker than those between the O2- and Co3+ sites. Compared with Mn3+, Zn2+, and Cu2+, Fe3+ effectively pumps electrons from Co sites to generate the active species for the oxygen evolution reaction. Thus, the deprotonation behavior and *OH conversion were improved. This work demonstrates the oxygen electron bridge modulated electron transfer between dual metal sites, contributing to the improvement of low-charging-voltage ZABs.

Asymmetric electron occupation of transition metals for the oxygen evolution reaction via a ligand-metal synergistic strategy

The performance of two-dimensional transition-metal (oxy)hydroxides (TMOOHs) for the electrocatalytic oxygen evolution reaction (OER), as well as their large-scale practical applications, are severely limited by the sluggish kinetics of the four-electron OER process. Herein, using a symmetry-breaking strategy, we simulated a complex catalyst composed of a single Co atom and a 1,10-phenanthroline (phen) ligand on CoOOH through density functional theory studies, which exhibits excellent OER performance. The active site Co undergoes a valence oscillation between +2, +3 and even high valence +4 oxidation states during the catalytic process, resulting from the distorted coordination effect after the ligand modification. The induced asymmetry in the electronic states of surrounding nitrogen and oxygen atoms modulates the eg occupation of Co-3d orbitals, which should be of benefit to reduce the overpotential in the OER process. By studying similar catalytic systems, the prominent role of ligands in creating asymmetric electronic structures and in modulating the valence of the active site and the OER performance was reconfirmed. This study provides a new dimension for optimizing the electrocatalytic performance of various TM-ligand complexes.

Atomic Manipulation to Create High-Valent Fe4+ for Efficient and Ultrastable Oxygen Evolution at Industrial-Level Current Density

Manipulating the electronic structure of a catalyst at the atomic level is an effective but challenging way to improve the catalytic performance. Here, by stretching the Fe-O bond in FeOOH with an inserted Mo atom, a Fe-O-Mo unit can be created, which will induce the formation of high-valent Fe4+ during the alkaline oxygen evolution reaction (OER). The highly active Fe4+ state has been clearly revealed by in situ X-ray absorption spectroscopy, which can both enhance the oxidation capability and lead to an efficient and stable adsorbate evolution mechanism (AEM) pathway for the OER. As a result, the obtained Fe-Mo-Ni3S2 catalyst exhibits both superior OER activity and outstanding stability, which can achieve an industrial-level current density of 1 A cm-2 at a low overpotential of 259 mV (at 60 °C) and can stably work at the large current for more than 2000 h. Moreover, by coupling with commercial Pt/C, the Fe-Mo-Ni3S2∥Pt/C system can be used in the anion exchange membrane cell to acquire 1 A cm-2 for overall water splitting at 1.68 V (2.03 V for 4 A cm-2), outperforming the benchmark RuO2∥Pt/C system. The efficient, low-cost, and ultrastable OER catalyst enabled by manipulating the atomic structure may provide potential opportunities for future practical water splitting.

Exploring Topochemical Oxidation Reactions for Reversible Tuning of Thermal Conductivity in Perovskite Fe Oxides

We present a study on the reversibility of thermal conductivity in iron oxides through topochemical oxygen exchange between brownmillerite (BM) (Ca,Sr)FeO2.5 and perovskite (PV) (Ca,Sr)FeO3.0. By using different oxidation methods, including gas phase (O2/O3), liquid phase (NaOCl in H2O), and solid electrolyte (Y2O3:ZrO2), we demonstrate that the oxidation pathway has a critical influence on the reversibility of the ionic-exchange process. Cyclic oxidation and reduction using O2/O3 or NaOCl lead to an important accumulation of structural defects, undermining the reversibility of thermal conductivity. In the case of wet oxidation, we demonstrate an inherent tendency of negative charge-transfer oxides toward amorphization and elucidate the origin of this effect. Conversely, the electrochemical injection of the O2- ions via a Y2O3:ZrO2 solid electrolyte reduces structural damage significantly, enhancing both reversibility and durability. This study underscores the importance of selecting appropriate topochemical oxygen exchange methods to maintain structural integrity and optimize functional performance in oxide-based tunable devices.

Boosting Oxygen Evolution Reaction Performance on NiFe-Based Catalysts Through d-Orbital Hybridization

Anion-exchange membrane water electrolyzers (AEMWEs) for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts. By introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units, the d-orbital and electronic structures can be adjusted, which is an important strategy to achieve sufficient oxygen evolution reaction (OER) performance in AEMWEs. Herein, the ternary NiFeM (M: La, Mo) catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this work. Experimental and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen, resulting in enhanced adsorption strength of oxygen intermediates, and reduced rate-determining step energy barrier, which is responsible for the enhanced OER performance. More critically, the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm-2 in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.

Nickel Hydroxide-Based Electrocatalysts for Promising Electrochemical Oxidation Reactions: Beyond Water Oxidation

Transition metal hydroxides have attracted significant research interest for their energy storage and conversion technique applications. In particular, nickel hydroxide (Ni(OH)2), with increasing significance, is extensively used in material science and engineering. The past decades have witnessed the flourishing of Ni(OH)2-based materials as efficient electrocatalysts for water oxidation, which is a critical catalytic reaction for sustainable technologies, such as water electrolysis, fuel cells, CO2 reduction, and metal-air batteries. Coupling the electrochemical oxidation of small molecules to replace water oxidation at the anode is confirmed as an effective and promising strategy for realizing the energy-saving production. The physicochemical properties of Ni(OH)2 related to conventional water oxidation are first presented in this review. Then, recent progress based on Ni(OH)2 materials for these promising electrochemical reactions is symmetrically categorized and reviewed. Significant emphasis is placed on establishing the structure-activity relationship and disclosing the reaction mechanism. Emerging material design strategies for novel electrocatalysts are also highlighted. Finally, the existing challenges and future research directions are presented.

Intercalation-Induced Irreversible Lattice Distortion in Layered Double Hydroxides

Inducing strain in the lattice effectively enhances the intrinsic activity of electrocatalysts by shifting the metal's d-band center and tuning the binding energy of reaction intermediates. NiFe-layered double hydroxides (NiFe LDHs) are promising electrocatalysts for the oxygen evolution reaction (OER) due to their cost-effectiveness and high catalytic activity. The distorted β-NiOOH phase produced by the Jahn-Teller effect under the oxidation polarization is known to exhibit superior catalytic activity, but it eventually transforms to the undistorted γ-NiOOH phase during the OER process. Such a reversible lattice distortion limits the OER activity. In this study, we propose a facile boron tungstate (BWO) anion intercalation method to induce irreversible lattice distortion in NiFe LDHs, leading to significantly enhanced OER activity. Strong interactions with BWO anions induce significant stress on the LDH's metal-hydroxide slab, leading to an expansion of metal-oxygen bonds and subsequent lattice distortion. In situ Raman spectroscopy revealed that lattice-distorted NiFe LDHs (D-NiFe LDHs) stabilize the β-NiOOH phase under the OER conditions. Consequently, D-NiFe LDHs exhibited low OER overpotentials (209 and 276 mV for 10 and 500 mA cm-2, respectively), along with a modest Tafel slope (33.4 mV dec-1). Moreover, D-NiFe LDHs demonstrated excellent stability at 500 mA cm-2 for 50 h, indicating that the lattice distortion of the LDHs is irreversible. The intercalation-induced lattice strain reported in this study can provide a general strategy to enhance the activity of electrocatalysts.

Advancing electrocatalytic reactions through mapping key intermediates to active sites via descriptors

Descriptors play a crucial role in electrocatalysis as they can provide valuable insights into the electrochemical performance of energy conversion and storage processes. They allow for the understanding of different catalytic activities and enable the prediction of better catalysts without relying on the time-consuming trial-and-error approaches. Hence, this comprehensive review focuses on highlighting the significant advancements in commonly used descriptors for critical electrocatalytic reactions. First, the fundamental reaction processes and key intermediates involved in several electrocatalytic reactions are summarized. Subsequently, three types of descriptors are classified and introduced based on different reactions and catalysts. These include d-band center descriptors, readily accessible intrinsic property descriptors, and spin-related descriptors, all of which contribute to a profound understanding of catalytic behavior. Furthermore, multi-type descriptors that collectively determine the catalytic performance are also summarized. Finally, we discuss the future of descriptors, envisioning their potential to integrate multiple factors, broaden application scopes, and synergize with artificial intelligence for more efficient catalyst design and discovery.

Engineering high-valence metal-enriched cobalt oxyhydroxide catalysts for an enhanced OER under near-neutral pH conditions

Understanding water splitting in pH-neutral media has important implications for hydrogen production from seawater. Despite their significance, electrochemical water oxidation and reduction in neutral electrolytes still face great challenges. This study focuses on designing efficient electrocatalysts capable of promoting the oxygen evolution reaction (OER) in neutral media by incorporating high-valence elements into transition-metal hydroxides. The as-prepared and optimized two-dimensional Mo-Co(OH)2 nanosheets, which undergo operando transformation into oxyhydroxide active species, demonstrated an overpotential of 550 mV at 10 mA cm-2 with a Tafel slope of 110.1 mV dec-1 in 0.5 M KHCO3. In situ X-ray absorption spectroscopy revealed that the incorporation of high-valence elements facilitates the generation of CoOOH active sites at low potential and enhances electron transfer kinetics by altering the electronic environment of the Co center. This study offers new insights for developing more efficient OER electrocatalysts and provides fresh ideas for seawater utilization through the study of the reaction mechanism of the near-neutral-pH OER.

Reverse Atom Capture on Perovskite Surface Enabling Robust and Efficient Cathode for Protonic Ceramic Fuel Cells

Protonic ceramic fuel cells (PCFCs) hold potential for sustainable energy conversion, yet their widespread application is hindered by the sluggish kinetics and inferior stability of cathode materials. Here, a facile and efficient reverse atom capture technique is developed to manipulate the surface chemistry of PrBa0.5Sr0.5Co1.5Fe0.5O5+ δ (PBSCF) cathode for PCFCs. This method successfully captures segregated Ba and Sr cations on the PBSCF surface using W species, creating a (Ba/Sr)(Co/Fe/W)O3- δ (BSCFW)@PBSCF heterostructure. Benefiting from enhanced kinetics of proton-involved oxygen reduction reaction and strengthened chemical stability, the single cell using the optimized 2W-PBSCF cathode demonstrates an exceptional peak power density of 1.32 W cm-2 at 650 °C and maintains durable performance for 240 h. Theoretical calculations unveil that the BSCFW perovskite delivers lower oxygen vacancy formation energy, hydration energy, and proton transfer energy compared to the PBSCF perovskite. This protocol offers new insights into advanced atom capture techniques for sustainable energy infrastructures.

Crystalline-Amorphous Heterophase PdMoCrW Tetrametallene: Highly Efficient Oxygen Reduction Electrocatalysts for a Long-Term Zn-Air Battery

Metallenes have received sustained attention owing to their unique microstructure characteristics and compelling catalytic applications, but the synthesis of multielement crystalline-amorphous metallenes remains a formidable challenge. Herein, we report a one-step wet chemical reduction method to synthesize composition-tunable crystalline-amorphous heterophase PdMoCrW tetrametallene. As-synthesized PdMoCrW tetrametallene is composed of approximately six to seven atomic layers and has flexible crimpiness, a crystalline-amorphous heterophase structure, and high-valence metal species. Time-dependent experiments show that PdMoCrW tetrametallene follows a three-step growth mechanism that includes nucleation, lateral growth, and atom diffusion, respectively. The novel ultrathin structure, optimized Pd electronic structure, and hydrophilic surface together greatly promote the activity and stability of PdMoCrW tetrametallene in the alkaline oxygen reduction reaction. Pd75.9Mo9.4Cr8.9W5.8/C exhibits excellent mass and specific activities of 2.81 A mgPd-1 and 4.05 mA cm-2, which are 20.07/14.46 and 23.42/16.20 times higher than those of commercial Pt/C and Pd/C, respectively. Furthermore, a Zn-air battery assembled using Pd75.9Mo9.4Cr8.9W5.8/C as a cathode catalyst achieves a peak power density of 156 mW cm-2 and an ultralong durability of 329 h. This study reports an effective strategy for constructing crystalline-amorphous quaternary metallenes to advance non-Pt electrocatalysts toward oxygen reduction reaction (ORR) performance and for a Zn-air battery.

A universal method to fabricate high-valence transition metal-based HER electrocatalysts and direct Raman spectroscopic evidence for interfacial water regulation

Valence modulation of transition metal oxides represents a highly effective approach in designing high-performance catalysts, particularly for pivotal applications such as the hydrogen evolution reaction (HER) in solar/electric water splitting and the hydrogen economy. Recently, there has been a growing interest in high-valence transition metal-based electrocatalysts (HVTMs) due to their demonstrated superiority in HER performance, attributed to the fundamental dynamics of charge transfer and the evolution of intermediates. Nevertheless, the synthesis of HVTMs encounters considerable thermodynamic barriers, which presents challenges in their preparation. Moreover, the underlying mechanism responsible for the enhancement in HVTMs still needs to be discovered. Hence, the universal synthesis strategies of the HVTMs are discussed, and direct Raman spectroscopic evidence for intermediates regulation is revealed to guide the further design of the HVTM electrocatalysts. This work offers new insights for facile designing of HVTMs electrocatalysts for energy conversion and storage through adjusting the reaction pathway.

Novel mixed heterovalent (Mo/Co)Ox-zerovalent Cu system as bi-functional electrocatalyst for overall water splitting

A novel hybrid ternary metallic electrocatalyst of amorphous Mo/Co oxides and crystallized Cu metal was deposited over Ni foam using a one-pot, simple, and scalable solvothermal technique. The chemical structure of the prepared ternary electrocatalyst was systematically characterized and confirmed via XRD, FTIR, EDS, and XPS analysis techniques. FESEM images of (Mo/Co)Ox-Cu@NF display the formation of 3D hierarchical structure with a particle size range of 3-5 µm. The developed (Mo/Co)Ox-Cu@NF ternary electrocatalyst exhibits the maximum activity with 188 mV and 410 mV overpotentials at 50 mA cm-2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Electrochemical impedance spectroscopy (EIS) results for the (Mo/Co)Ox-Cu@NF sample demonstrate the minimum charge transfer resistance (Rct) and maximum constant phase element (CPE) values. A two-electrode cell based on the ternary electrocatalyst just needs a voltage of about 1.86 V at 50 mA cm-2 for overall water splitting (OWS). The electrocatalyst shows satisfactory durability during the OWS for 24 h at 10 mA cm-2 with an increase of only 33 mV in the cell potential.

Stabilizing Highly Active Ru Sites by Electron Reservoir in Acidic Oxygen Evolution

Proton exchange membrane water electrolysis is hindered by the sluggish kinetics of the anodic oxygen evolution reaction. RuO2 is regarded as a promising alternative to IrO2 for the anode catalyst of proton exchange membrane water electrolyzers due to its superior activity and relatively lower cost compared to IrO2. However, the dissolution of Ru induced by its overoxidation under acidic oxygen evolution reaction (OER) conditions greatly hinders its durability. Herein, we developed a strategy for stabilizing RuO2 in acidic OER by the incorporation of high-valence metals with suitable ionic electronegativity. A molten salt method was employed to synthesize a series of high-valence metal-substituted RuO2 with large specific surface areas. The experimental results revealed that a high content of surface Ru4+ species promoted the OER intrinsic activity of high-valence doped RuO2. It was found that there was a linear relationship between the ratio of surface Ru4+/Ru3+ species and the ionic electronegativity of the dopant metals. By regulating the ratio of surface Ru4+/Ru3+ species, incorporating Re, with the highest ionic electronegativity, endowed Re0.1Ru0.9O2 with exceptional OER activity, exhibiting a low overpotential of 199 mV to reach 10 mA cm-2. More importantly, Re0.1Ru0.9O2 demonstrated outstanding stability at both 10 mA cm-2 (over 300 h) and 100 mA cm-2 (over 25 h). The characterization of post-stability Re0.1Ru0.9O2 revealed that Re promoted electron transfer to Ru, serving as an electron reservoir to mitigate excessive oxidation of Ru sites during the OER process and thus enhancing OER stability. We conclude that Re, with the highest ionic electronegativity, attracted a mass of electrons from Ru in the pre-catalyst and replenished electrons to Ru under the operating potential. This work spotlights an effective strategy for stabilizing cost-effective Ru-based catalysts for acidic OER.

Surface Reconstruction Facilitated by Fluorine Migration and Bimetallic Center in NiCo Bimetallic Fluoride Toward Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is a critical anodic reaction of electrochemical water splitting, developing a high-efficiency electrocatalyst is essential. Transition metal-based catalysts are much more cost-effective if comparable activities can be achieved. Among them, fluorides are rarely reported due to their low aqueous stability of coordination and low electric conductivity. Herein, a NiCo bimetallic fluoride with good crystallinity is designed and constructed, and significantly enhanced catalytic activity and conductivity are observed. The inevitable oxidation of transition metal ions at high potential and the dissociation of F- are attributed to the low aqueous stability of coordination. The theoretical researches predicte that transition metal fluorides should have a strong tendency to electrochemical reconstruction. Therefore, based on the observations on their electrochemical behavior, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and bode plots, it is further demonstrated that surface reconstruction occurred during the electrochemical process, meanwhile a significant increase of electrochemically active area, which is created by F migration, are also directly observed. Additionally, DFT calculation results show that the electronic structure of the catalysts is modulated by the bimetallic centers, and this reconstruction helps optimizing the adsorption energy of oxygen-containing species and improves OER activity.

A novel electrochemical flow-cell for operando XAS investigations in X-ray opaque supports

Improvement of electrochemical technologies is one of the most popular topics in the field of renewable energy. However, this process requires a deep understanding of the electrode-electrolyte interface behavior under operando conditions. X-ray absorption spectroscopy (XAS) is widely employed to characterize electrode materials, providing element-selective oxidation state and local structure. Several existing cells allow studies as close as possible to realistic operating conditions, but most of them rely on the deposition of the electrodes on conductive and X-ray transparent materials, from where the radiation impinges the sample. In this work, we present a new electrochemical flow-cell for operando XAS that can be used with X-ray opaque substrates, since the signal is effectively detected from the electrode surface, as the radiation passes through a thin layer of electrolyte (∼17 μm). The electrolyte can flow over the electrode, reducing bubble formation and avoiding strong reactant concentration gradients. We show that high-quality data can be obtained under operando conditions, thanks to the high efficiency of the cell from the hard X-ray regime down to ∼4 keV. We report as a case study the operando XAS investigation at the Fe and Ni K-edges on Ni-doped γ-Fe2O3 films, epitaxially grown on Pt substrates. The effect of the Ni content on the catalytic performances for the oxygen evolution reaction is discussed.

Importance of the Walden Inversion for the Activity Volcano Plot of Oxygen Evolution

Since the birth of the computational hydrogen electrode approach, it is considered that activity trends of electrocatalysts in a homologous series can be quantified by the construction of volcano plots. This method aims to steer materials discovery by the identification of catalysts with an improved reaction kinetics, though evaluated by means of thermodynamic descriptors. The conventional approach for the volcano plot of the oxygen evolution reaction (OER) relies on the assumption of the mononuclear mechanism, comprising the * OH, * O, and * OOH intermediates. In the present manuscript, two new mechanistic pathways, comprising the idea of the Walden inversion in that bond-breaking and bond-making occurs simultaneously, are factored into a potential-dependent OER activity volcano plot. Surprisingly, it turns out that the Walden inversion plays an important role since the activity volcano is governed by mechanistic pathways comprising Walden steps rather than by the traditionally assumed reaction mechanisms under typical OER conditions.

Interface Engineering a High Content of Co3+ Sites on Co3O4 Nanoparticles to Boost Acidic Oxygen Evolution

Non-noble metal oxides have emerged as potential candidate electrocatalysts for acidic oxygen evolution reactions (OERs) due to their earth abundance; however, improving their catalytic activity and stability simultaneously in strong acidic electrolytes is still a major challenge. In this work, we report Co3O4@carbon core-shell nanoparticles on 2D graphite sheets (Co3O4@C-GS) as mixed-dimensional hybrid electrocatalysts for acidic OER. The obtained Co3O4@C-GS catalyst exhibits a low overpotential of 350 mV and maintains stability for 20 h at a current density of 10 mA cm-2 in H2SO4 (pH = 1) electrolyte. X-ray photoelectron and X-ray absorption spectroscopies illustrate that the higher content of Co3+ sites boosts acidic OER. Operando Raman spectroscopy reveals that the catalytic stability of Co3O4@C nanoparticles during the acidic OER is enhanced by the introduction of graphite sheets. This interface engineering of non-noble metal sites with high valence states provides an efficient approach to boost the catalytic activity and enhance the stability of noble-metal-free electrocatalysts for acidic OER.

High-Valence Oxides for High Performance Oxygen Evolution Electrocatalysis

Valence tuning of transition metal oxides is an effective approach to design high-performance catalysts, particularly for the oxygen evolution reaction (OER) that underpins solar/electric water splitting and metal-air batteries. Recently, high-valence oxides (HVOs) are reported to show superior OER performance, in association with the fundamental dynamics of charge transfer and the evolution of the intermediates. Particularly considered are the adsorbate evolution mechanism (AEM) and the lattice oxygen-mediated mechanism (LOM). High-valence states enhance the OER performance mainly by optimizing the eg -orbital filling, promoting the charge transfer between the metal d band and oxygen p band. Moreover, HVOs usually show an elevated O 2p band, which triggers the lattice oxygen as the redox center and enacts the efficient LOM pathway to break the "scaling" limitation of AEM. In addition, oxygen vacancies, induced by the overall charge-neutrality, also promote the direct oxygen coupling in LOM. However, the synthesis of HVOs suffers from relatively large thermodynamic barrier, which makes their preparation difficult. Hence, the synthesis strategies of the HVOs are discussed to guide further design of the HVO electrocatalysts. Finally, further challenges and perspectives are outlined for potential applications in energy conversion and storage.