Graphene-Supported Ultrafine Metal Nanoparticles Encapsulated by Mesoporous Silica: Robust Catalysts for Oxidation and Reduction Reactions

Stabilizing ultra-close Pt clusters on all-in-one CeO2/Al2O3 fibril-in-tubes against sintering

Metal sintering poses significant challenges for developing reliable catalytic systems toward high-temperature reactions, particularly those based on metal clusters with sizes below 3 nm. In this work, electrospun dual-oxide fibril-in-tubes consisting of CeO2 and Al2O3 are rationally designed in an all-in-one manner, to stabilize 2.3 nm Pt clusters with a Tammann temperature (sintering onset temperature) lower than 250 °C. The abundant pores and channels effectively stabilize the Pt clusters physically, while the strong support, CeO2, with high adhesion, pins Pt clusters firmly, and the adjacent weak support, Al2O3, with low adhesion, provides energy barriers to prevent the clusters and emitted Pt atom(s) from moving across the support. Therefore, the ultra-close 2.3 nm Pt clusters, featuring an average nearest neighboring distance of only 2.1 nm, were carefully stabilized against sintering at temperatures exceeding 750 °C, even in oxidative and steam-containing environments. In addition, this catalytic system can efficiently and durably serve in diesel combustion, a high-temperature exothermic reaction, showing no activity decline after 5 cycles. This work provides a comprehensive understanding of sinter-resistant catalytic systems, and presents new insights for the development of advanced nanocatalysts.

Research progress on metal-organic framework compounds (MOFs) in electrocatalysis

Metal-organic frameworks (MOFs) have favorable characteristics such as large specific surface area, high porosity, structural diversity, and pore surface modification, giving them great potential for development and attractive prospects in the research area of modern materials electrocatalysis. However, unsatisfactory catalytic activity and poor electronic conductivity are the main challenges facing MOFs. This review focuses on MOF-based materials used in electrocatalysis, based on the types of catalytic reactions that have used MOF-based materials in recent years along with their applications, and also looks at some new electrocatalytic materials and their future development prospects.

A suitably fabricated ternary nanocomposite (Cu-CuO@rGO-SiO2) as a sustainable and common heterogeneous catalyst for C-S, C-O and C-N coupling reactions

A hybrid composite based on π-electron rich reduced graphene oxide (rGO) and mesoporous silica (SiO2) was prepared and decorated with copper species to afford a ternary nanocomposite material (Cu-CuO@rGO-SiO2). This copper-based nanocomposite was successfully used as a robust and multi-tasking heterogeneous catalyst for most common cross-coupling reactions (e.g. C-S, C-O and C-N coupling). A broad range of catalytic activities are believed to be originated from the synergism of different co-existing copper species (Cu(0) and CuO) and facile charge transfer from the metal ions towards rGO-SiO2 matrices, as established from XPS and other studies.

Controlling Pt nanoparticle sintering by sub-monolayer MgO ALD thin films

Metal nanoparticle (NP) sintering is a major cause of catalyst deactivation, as NP growth reduces the surface area available for reaction. A promising route to halt sintering is to deposit a protective overcoat on the catalyst surface, followed by annealing to generate overlayer porosity for gas transport to the NPs. Yet, such a combined deposition-annealing approach lacks structural control over the cracked protection layer and the number of NP surface atoms available for reaction. Herein, we exploit the tailoring capabilities of atomic layer deposition (ALD) to deposit MgO overcoats on archetypal Pt NP catalysts with thicknesses ranging from sub-monolayers to nm-range thin films. Two different ALD processes are studied for the growth of MgO overcoats on Pt NPs anchored on a SiO2 support, using Mg(EtCp)2 and H2O, and Mg(TMHD)2 and O3, respectively. Spectroscopic ellipsometry and X-ray photoelectron spectroscopy measurements reveal significant growth on both SiO2 and Pt for the former process, while the latter exhibits a drastically lower growth per cycle with an initial chemical selectivity towards Pt. These differences in MgO growth characteristics have implications for the availability of uncoated Pt surface atoms at different stages of the ALD process, as probed by low energy ion scattering, and for the sintering behavior during O2 annealing, as monitored in situ with grazing incidence small angle X-ray scattering (in situ GISAXS). The Mg(TMHD)2-O3 ALD process enables exquisite coverage control allowing a balance between physically blocking the Pt surface to prevent sintering and keeping Pt surface atoms free for reaction. This approach avoids the need for post-annealing, hence also safeguarding the structural integrity of the as-deposited overcoat.

A Novel Fluorescent Aptasensor Based on Mesoporous Silica Nanoparticles for Selective and Sensitive Detection of Saxitoxin in Shellfish

Background:

Saxitoxin (STX) stands as one of the most potent marine biotoxins, exhibiting high lethality. Despite its severity, current treatments remain ineffective, and existing detection techniques are limited due to ethical concerns and technical constraints.

Methods:

Herein, an innovative approach was constructed for STX detection, utilizing mesoporous silica nanoparticles (MSN) as a foundation. This innovative, easy, and label-free aptamer (Apt)- sensor was fabricated. Apts were employed as molecular identification probes and "gated molecules," while rhodamine 6G was encapsulated within particles to serve as a signal probe. In a lack of STX, Apts immobilized on an MSN surface kept a "gate" closed, preventing signal probe leakage. Upon the presence of STX, the "gate" opened, allowing a particular binding of Apts to STX and a subsequent release of a signal probe.

Results:

Experimental results demonstrated a positive correlation between fluorescence intensity and concentrations of STX within a range of 1 to 80 nM, with an exceptional limit of detection of 0.12 nM. Furthermore, the selectivity and stability of a biosensor were rigorously evaluated, validating its reliability.

Conclusion:

This newly developed sensing strategy exhibits remarkable performance in STX detection. Its success holds significant promise for advancing portable STX detection equipment, thereby addressing a pressing need for efficient and ethical detection methods in combating marine biotoxin contamination.

Synthesis of Azoxy Compounds: from Copper Compounds to Mesoporous Silica-Encaged Ultrasmall Copper Catalysts

Azoxy compounds have aroused extensive attention due to their unique biological activities, but the chemical synthesis of these compounds often suffers from limitations due to their requirement for stoichiometric oxidants, high costs, and restricted substrate range. Herein, a series of azoxy compounds were constructed via facile coupling reactions by using cost-effective N-methoxyformamide and nitroso compounds over Cu-based catalysts, affording high product yields with excellent tolerance of functional groups. Significantly, the mesoporous silica nanosphere-encapsulated ultrasmall Cu (Cu@MSN) catalyst was developed via a one-pot synthetic method and first used for the synthesis of azoxy compounds. As compared with copper salt catalysts, the Cu@MSN catalyst exhibited remarkably enhanced catalytic activity and superior recycling stability. Such a Cu@MSN catalyst overcame the inherent drawbacks of low activity, fast deactivation, and difficult recycling of traditional metal salt catalysts in organic reactions. This work provides a green and efficient method for the construction of azoxy compounds and also creates new prospects for the application of nanoporous materials confined metal catalysts in organic synthesis.

Morphology-Engineering Construction of Anti-Aggregated Co/N-Doped Hollow Carbon from Metal-Organic Frameworks for Efficient Biomass Upgrading

The controlled pyrolysis of metal/carbon-containing precursors is commonly used for fabricating multifunctional metal/carbon-based catalysts, nevertheless, the inevitable agglomeration of these precursors in pyrolysis is extremely negative for efficient catalysis. This study reports the first example of suppressing the interfacial fusion and agglomeration of metal/carbon-based catalyst in its pyrolysis-involved fabrication process by developing a facile morphology-engineering strategy. Metal-organic framework precursors are chosen as a proof of concept and five Co/N-doped hollow carbons with different morphologies (rhombic dodecahedron, cube, plate, interpenetration twin, and rod) are synthesized via the pyrolysis of their corresponding core-shell ZIF-8@ZIF-67 precursors. It is demonstrated that the interpenetration twin precursor shows the minimum interfacial contact of interparticles due to its partly-concave morphology with abundant facets, which endows it with the best resistibility from interfacial fusion and thus aggregation of interparticles during pyrolysis. Benefiting from its unique anti-aggregated structure with high specific surface area, abundant fully-exposed active sites, and good dispersibility, the resultant 36-facet Co/N-doped hollow carbon exhibit remarkably improved catalytic property for biomass upgrading as compared with its aggregated counterparts. This study highlights the crucial role of engineering morphology to prevent metal/carbon-containing precursors from detrimental agglomeration during pyrolysis, demonstrating a new approach to constructing anti-aggregated metal/carbon-based catalysts.

Double solvent synthesis of ultrafine Pt nanoparticles supported on halloysite nanotubes for chemoselective cinnamaldehyde hydrogenation

The development of highly active, low cost and durable catalysts for selective hydrogenation of aldehydes is imperative and challenging. In this contribution, we rationally constructed ultrafine Pt nanoparticles (Pt NPs) supported on the internal and external surfaces of halloysite nanotubes (HNTs) by a facile double solvent strategy. The influence of Pt loading, HNTs surface properties, reaction temperature, reaction time, H₂ pressure and solvents on the performance of cinnamaldehyde (CMA) hydrogenation was analyzed. The optimal catalysts with the Pt loading of 3.8 wt% and the average Pt particle size of 2.98 nm exhibited outstanding catalytic activity for the hydrogenation of CMA to cinnamyl alcohol (CMO) with 94.1% conversion of CMA and 95.1% selectivity to CMO. More impressively, the catalyst showed excellent stability during six cycles of use. The ultra-small size and high dispersion of Pt NPs, the negative charge on the outer surface of HNTs, the -OH on the inner surface of HNTs, and the polarity of anhydrous ethanol solvent account for the outstanding catalytic performance. This work offers a promising way to develop high-efficiency catalysts with high CMO selectivity and stability by combining clay mineral halloysite and ultrafine nanoparticles.

Fluorescent aptamer-modified mesoporous silica nanoparticles for quantitative acetamiprid detection

Acetamiprid (ACE) is widely used to control aphids, brown planthoppers, and other pests in agricultural production. However, ACE is difficult to degrade in the environment, resulting in excessive residue, which causes acute and chronic toxicity to human beings and non-target organisms. Therefore, the development of a rapid, convenient, and highly sensitive method to quantify ACE is essential. In this study, aminated mesoporous silica nanoparticles (MSNs-NH₂) were synthesized by one-pot method, and 6-carboxyl fluorescein modified aptamers (FAM-Apt) of ACE were adsorbed on the surface of MSNs-NH₂ by electrostatic interaction. Finally, a simple and sensitive fluorescence analysis method for the rapid detection of ACE was established. In the absence of ACE, the negatively charged FAM-Apt was electrostatically bound to the positively charged MSNs-NH₂, followed by centrifugation to precipitate MSNs-NH₂@FAM-Apt, and no fluorescent signal was detected in the supernatant. In the presence of ACE, the specific combination of FAM-Apt with ACE was greater than its electrostatic interaction with MSNs-NH₂, so that FAM-Apt was separated from MSNs-NH₂, and the supernatant had strong fluorescence signal after centrifugation. For ACE detection, the linear concentration range was 50-1100 ng/mL, and the detection limit (LOD) was 30.26 ng/mL. The method exhibited high sensitivity, selectivity and reproducibility, which is suitable for practical sample analysis and provides guidance for rapid detection of pesticide residues.

Polydimethylsiloxane Sponge-Supported Metal Nanoparticles as Reusable Catalyst for Continuous Flow Reactions

In this manuscript, polydimethylsiloxane (PDMS) sponges supporting metal nanoparticles (gold and palladium) were developed and their catalytic properties were studied through a model reaction such as the hydrogenation of p-nitrophenol. Different synthetic conditions for gold and palladium were studied to obtain the best catalyst in terms of nanoparticle loading. The as-prepared catalysts were characterized by different techniques such as scanning electron microscopy (SEM) and inductively coupled plasma optical emission spectroscopy (ICP-OES). The catalytic efficiency and recyclability of the supported catalyst were tested in static conditions. In addition, thanks to the porous structure of the material where the catalytic centers (metal nanoparticles) are located, the model reaction for continuous flow systems was tested, passing the reaction components through the catalyst, observing a high efficiency and recyclability for these systems.

Green Synthesis of Au-NPs on g-C3N4 Hybrid Nanomaterials Based on Supramolecular Pillar[6]arene and Its Applications for Catalysis

Gold nanoparticles (Au NPs) are installed in situ on the surfaces of graphitic carbon nitride (g-C₃N₄) based on supramolecular hydroxylatopillar[6]arene (P6). The Au NPs can be obtained via the redox reaction between HAuCl₄ and P6 without any NH₂-NH₂, NaBH₄, and other reductants, where AuCl₄ ^- is reduced to Au⁰ by the -OH groups in the presence of OH^-, and the -OH groups are oxidized into -COOH. First, P6 is loaded onto the surface of g-C₃N₄ via π-π interaction between P6 and g-C₃N₄, which offers a stabilized and reduced site for in situ anchoring of Au NPs. The hybrid nanomaterial Au-NPs@P6@g-C₃N₄ exhibits higher catalytic capability than the Pd/C catalyst in 4-nitrophenol (4-NP) reduction and methylene blue degradation, which opens a new avenue for designing more efficient hybrid nanomaterials for application in catalysis, sensing, and other fields.

A Bioinspired Five-Coordinated Single-Atom Iron Nanozyme for Tumor Catalytic Therapy

Single-atom nanozymes (SAzymes) represent a new research frontier in the biomedical fields. The rational design and controllable synthesis of SAzymes with well-defined electronic and geometric structures are essential for maximizing their enzyme-like catalytic activity and therapeutic efficacy but remain challenging. Here, a melamine-mediated pyrolysis activation strategy is reported for the controllable fabrication of iron-based SAzyme containing five-coordinated structure (FeN₅ ), identified by transmission electron microscopy imaging and X-ray absorption fine structure analyses. The FeN₅ SAzyme exhibits superior peroxidase-like activity owing to the optimized coordination structure, and the corresponding catalytic efficiency of Fe-species in the FeN₅ SAzyme is 7.64 and 3.45 × 10⁵ times higher than those in traditional FeN₄ SAzyme and Fe₃ O₄ nanozyme, respectively, demonstrated by steady-state kinetic assay. In addition, the catalytic mechanism is jointly disclosed by experimental results and density functional theory studies. The as-synthesized FeN₅ SAzyme demonstrates significantly enhanced antitumor effect in vitro and in vivo due to the excellent peroxidase-like activity under tumor microenvironment.

Stable Cu Catalysts Supported by Two-dimensional SiO2 with Strong Metal-Support Interaction

Cu-based catalysts exhibit excellent performance in hydrogenation reactions. However, the poor stability of Cu catalysts under high temperatures has restricted their practical applications. The preparation of stable Cu catalysts supported by SiO₂ with strong metal-support interaction (SMSI) has thus aroused great interest due to the high abundance, low toxicity, feasible processability, and low cost of SiO₂ . The challenge in the construction of such SMSI remains to be the inertness of SiO₂ . Herein, a simple and scalable method is developed to prepare 2D silica (2DSiO₂ ) supported Cu catalysts with SMSI by carefully manipulating the topological exfoliation of CaSi₂ with CuCl₂ and thereafter calcination. The prepared Cu-2DSiO₂ catalysts with the unique encapsulated Cu nanoparticles exhibit excellent activity and long-term stability in high-temperature CO₂ hydrogenation reactions. This feasible and low-cost solution for stabilizing Cu catalysts might shed light on their realistic applications.

Efficient Suzuki-Miyaura cross-coupling reaction by loading trace Pd nanoparticles onto copper-complex-derived Cu/C-700 solid support

The development of efficient carbon-carbon cross-coupling catalysts with low noble metal amounts attracts much attention recently. Herein, a Cu/C-700/Pd nanocomposite is obtained by loading trace Pd²⁺ onto carbon support derived from a novel mononuclear copper complex, {[Cu(POP)₂(Phen)₂]BF₄}. The as-prepared nanomaterial features the facial structure of highly dispersed copper phosphide nanoparticles as well as Pd nanoparticles via neighboring Cu-Pd sites. The Cu/C-700/Pd nanocomposite shows excellent catalytic activity (99.73%) and selectivity in Suzuki-Miyaura cross-coupling reaction, at trace Pd loading (0.43 mol%). Compared with the reported palladium nano catalysts, its advantages are proved. The appealing gateway to this stable, innovative and recyclability, Cu/C-700/Pd nanostructure recommends its beneficial utilization in carbon-carbon coupling and other environmentally friendly processes.

Recent advancement in Bi5O7I-based nanocomposites for high performance photocatalysts

Bi₅O₇I belongs to the family of bismuth oxyhalides (BiOX, X = Cl, Br, I), having a unique layered structure with an internal electrostatic field that promotes the separation and transfer of photo-generated charge carriers. Interestingly, Bi₅O₇I exhibits higher thermal stability compared to its other BiOX member compounds and absorption spectrum extended to the visible region. Bi₅O₇I has demonstrated applications in diverse fields such as photocatalytic degradation of various organic pollutants, marine antifouling, etc. Unfortunately, owing to its wide band gap of ∼2.9 eV, its absorption lies mainly in the ultraviolet region, and a tiny portion of absorption lies in the visible region. Due to limited absorption, the photocatalytic performance of pure Bi₅O₇I is still facing challenges. In order to reduce the band gap and increase the light absorption capability of Bi₅O₇I, doping and formation of heterostructure strategies have been employed, which showed promising results in the photocatalytic performance. In addition, the plasmonic heterostructures of Bi₅O₇I were also developed to further boost the efficiency of Bi₅O₇I as a photocatalyst. Here, in this review article, we present such recent efforts made for the advanced development of Bi₅O₇I regarding its synthesis, properties and applications. The strategies for photocatalytic performance enhancement have been discussed in detail. Moreover, in the conclusion section, we have presented the current challenges and discussed possible prospective developments in this field.

Quantification of critical particle distance for mitigating catalyst sintering

Supported metal nanoparticles are of universal importance in many industrial catalytic processes. Unfortunately, deactivation of supported metal catalysts via thermally induced sintering is a major concern especially for high-temperature reactions. Here, we demonstrate that the particle distance as an inherent parameter plays a pivotal role in catalyst sintering. We employ carbon black supported platinum for the model study, in which the particle distance is well controlled by changing platinum loading and carbon black supports with varied surface areas. Accordingly, we quantify a critical particle distance of platinum nanoparticles on carbon supports, over which the sintering can be mitigated greatly up to 900 °C. Based on in-situ aberration-corrected high-angle annular dark-field scanning transmission electron and theoretical studies, we find that enlarging particle distance to over the critical distance suppress the particle coalescence, and the critical particle distance itself depends sensitively on the strength of metal-support interactions.

Deactivation of supported metal catalysts via thermally induced sintering is a major concern in the catalysis community. Here, the authors demonstrate that enlarging particle distance to over the critical distance could suppress the particle coalescence greatly up to 900 °C.

Ultrathin 2D Fe-Nanosheets Stabilized by 2D Mesoporous Silica: Synthesis and Application in Ammonia Synthesis

Developing high-performance Fe-based ammonia catalysts through simple and cost-efficient methods has received an increased level of attention. Herein, we report for the first time, the synthesis of two-dimensional (2D) FeOOH nanoflakes encapsulated by mesoporous SiO₂ (mSiO₂) via a simple solution-based method for ammonia synthesis. Due to the sticking of the mSiO₂ coating layers and the limited spaces in between, the Fe after reduction retains the 2D morphology, showing high resistance against the sintering in the harsh Haber-Bosch process. Compared to supported Fe particles dispersed on mSiO₂ spheres, the coated catalyst shows a significantly improved catalytic activity by 50% at 425 °C. Thermal desorption spectroscopy (TDS) reveals the existence of a higher density of reactive sites for N₂ activation in the 2D Fe catalyst, which is possibly coupled to a larger density of surface defect sites (kinks, steps, point defects) that are generally considered as active centers in ammonia synthesis. Besides the structural impact of the coating on the 2D Fe, the electronic one is elucidated by partially substituting Si with Al in the coating, confirmed by ²⁹Si and ²⁷Al magic-angle spinning nuclear magnetic resonance (MAS NMR). An increased apparent activation energy (E_a) of the Al-containing catalyst evidences an influence on the nature of the active site. The herein-developed stable 2D Fe nanostructures can serve as an example of a 2D material applied in catalysis, offering the chance of a rational catalyst design based on a stepwise introduction of various promoters, in the coating and on the metal, maintaining the spatial control of the active centers.

Interfacial Microenvironment Modulation Boosting Electron Transfer between Metal Nanoparticles and MOFs for Enhanced Photocatalysis

Interfacial electron transfer between cocatalyst and photosensitizer is key in heterogeneous photocatalysis, yet the underlying mechanism remains subtle and unclear. Surfactant coated on the metal cocatalysts, greatly modulating the microenvironment of catalytic sites, is largely ignored. Herein, a series of Pt co-catalysts with modulated microenvironments, including polyvinylpyrrolidone (PVP) capped Pt nanoparticles (denoted as Pt_PVP ), Pt with partially removed PVP (Pt_rPVP ), and clean Pt without PVP (Pt), were encapsulated into a metal-organic framework (MOF), UiO-66-NH₂ , to afford Pt_PVP @UiO-66-NH₂ , Pt_rPVP @UiO-66-NH₂ , and Pt@UiO-66-NH₂ , respectively, for photocatalytic hydrogen production. The PVP appears to have a negative influence on the interfacial electron transfer between Pt and the MOF. Compared with Pt_PVP @UiO-66-NH₂ , the removal of interfacial PVP improves the sluggish kinetics of electron transfer, boosting photocatalytic hydrogen production.

All-Graphitic Multilaminate Mesoporous Membranes by Interlayer-Confined Molecular Assembly

Layered mesostructured graphene, which combines the intrinsic advantages of planar graphene and mesoporous materials, has become interestingly important for energy storage and conversion applications. Here, an interlayer-confined molecular assembly method is presented for constructing all-graphitic multilaminate membranes (MMG⊂rGO), which are composed of monolayer mesoporous graphene (MMG) sandwiched between reduced graphene oxide (rGO) sheets. Hybrid assembly of iron-oleate complexes and organically modified GO sheets enables the preferential assembly of iron-oleate precursors at the interlayer space of densely stacked GO, driven by the like-pair molecular van der Waals interactions. Confined pyrolysis of iron-oleate complexes at GO interlayers leads to close-packed, carbon-coated Fe₃ O₄ nanocrystal arrays, which serve as intermediates to template the subsequent formation of MMG⊂rGO membranes. To demonstrate their application potentials, MMG⊂rGO membranes are exploited as dual-functional interlayers to boost the performance of Li-S batteries by concurrently suppressing the shuttle of polysulfides and the growth of Li dendrites. This work showcases the capability of molecular-based hybrid assembly for synthesizing multilayer mesostructured graphene with high packing density and its use in electrochemical energy applications.

Graphene-Based Two-Dimensional Mesoporous Materials: Synthesis and Electrochemical Energy Storage Applications

Graphene (G)-based two dimensional (2D) mesoporous materials combine the advantages of G, ultrathin 2D morphology, and mesoporous structures, greatly contributing to the improvement of power and energy densities of energy storage devices. Despite considerable research progress made in the past decade, a complete overview of G-based 2D mesoporous materials has not yet been provided. In this review, we summarize the synthesis strategies for G-based 2D mesoporous materials and their applications in supercapacitors (SCs) and lithium-ion batteries (LIBs). The general aspect of synthesis procedures and underlying mechanisms are discussed in detail. The structural and compositional advantages of G-based 2D mesoporous materials as electrodes for SCs and LIBs are highlighted. We provide our perspective on the opportunities and challenges for development of G-based 2D mesoporous materials. Therefore, we believe that this review will offer fruitful guidance for fabricating G-based 2D mesoporous materials as well as the other types of 2D heterostructures for electrochemical energy storage applications.

Palladium oxide-decorated mesoporous silica on graphene oxide nanosheets as a heterogeneous catalyst for the synthesis of β-substituted indole derivatives

In this work, an efficient and facile strategy has been adopted for the stepwise synthesis of the RGO-MSiO2/PdO hybrid nanomaterial (HY-NM). Herein, a hybrid nanostructure of mesoporous silica over graphene oxide (GO) sheets has been developed followed by immobilizing palladium oxide nanoparticles (PdO NPs), and then it has been utilized for catalyzing a multicomponent reaction (MCR). To authenticate the successful synthesis of the HY-NM and successive immobilization of PdO NPs, various physicochemical characterization techniques were utilized such as SEM, EDAX, HR-TEM, HR-XRD, TGA, BET, FT-IR, and XPS analysis. The activity of the HY-NM has been determined by performing the catalyst-mediated synthesis of β-substituted indole derivatives (yield 90-98%). The excellent catalytic activity of the prepared HY-NM could be observed due to its high surface area and large porosity, which facilitates the penetration and interaction of reactant molecules with the catalytic active species. This protocol eliminates the requirement of further purification after the isolation of the product from the reaction mixture. The ease of handling, recyclability of the catalyst, and simple work-up procedure are the main features of this protocol. The synthesized HY-NM could be recycled for multiple catalytic cycles making it a very effective heterogeneous catalyst.

Micro-mesoporous submicron silica particles with pore size tunable in a wide range: synthesis, properties and prospects for LED manufacturing

An approach has been developed that allows the synthesis of submicron spherical silica particles with a controlled micro-mesoporous structure possessing a large specific surface area (up to 1300 m²g^-1). Particle synthesis is carried out by the hydrolysis of a mixture of various organosilanes mostly associated either with CTAB or with each other. A change in the concentration of CTAB in the reaction mixture apparently leads to a change in the formation mechanism of nuclei for the silica particle growth, which allows for varying the diameter of the synthesized particles in the range from 40-450 nm. The effect of the composition of the silica precursor ([3-(methacryloyloxy)propyl]trimethoxysilane, (3-aminopropyl)triethoxysilane and tetraethoxysilane) on the formation process and porosity of the resulting particles is studied. It was shown that by simply varying the ratio of organosilanes in the composition of the precursor, one can control the pore diameter of the particles in a wide range from 0.6-15 nm. The large-pore (up to 15 nm) silica particles are used as a matrix for the spatial distribution of luminescent carbon dots. The incorporation of carbon dots into SiO₂particles prevents their aggregation leading to emission quenching after drying, thus allowing us to obtain highly luminescent composite particles. LEDs based on the obtained composite material show bright visible luminescence with spectral characteristics similar to that of a commercial cold white LED.

3D Porous Polymeric-Foam-Supported Pd Nanocrystal as a Highly Efficient and Recyclable Catalyst for Organic Transformations

The efficient recovery of noble metal nanocrystals used in heterogeneous organic transformations has remained a significant challenge, hindering their use in industry. Herein, highly catalytic Pd nanoparticles (NPs) were first prepared having a yield of >98% by a novel hydrothermal method using PVP as the reducing cum stabilizing agent that exhibited excellent turnover frequencies of ∼38,000 h^-1 for Suzuki-Miyaura cross-coupling and ∼1200 h^-1 for catalytic reduction of nitroarene compounds in a benign aqueous reaction medium. The Pd NPs were more efficient for cross-coupling of aryl compounds with electron-donating substituents than with electron-donating ones. Further, to improve their recyclability, a strategy was developed to embed these Pd NPs on mechanically robust polyurethane foam (PUF) for the first time and a "dip-catalyst" (Pd-PUF) containing 3D interconnected 100-500 μm pores was constructed. The PUF was chosen as the support with an expectation to reduce the fabrication cost of the "dip-catalyst" as the production of PUF is already commercialized. Pd-PUF could be easily separated from the reaction aliquot and reused without any loss of activity because the leaching of Pd NPs was found to be negligible in the various reaction mixtures. We show that the Pd-PUF could be reused for over 50 catalytic cycles maintaining a similar activity. We further demonstrate a scale-up reaction with a single-reaction 1.5 g yield for the Suzuki-Miyaura cross-coupling reaction.

A Novel Carbon Support: Few-Layered Graphdiyne-Decorated Carbon Nanotubes Capture Metal Clusters as Effective Metal-Supported Catalysts

Carbon-supported metal nanocatalysts have received substantial attention for heterogeneous catalysis in industry. Hunting for suitable and impactful carbon supports that have strong interactions with metal nanocatalyst is a matter of great urgency. Herein, a well-designed graphdiyne layer decorated on the carbon nanotubes sidewalls (CNT@GDY) serves as a novel carbon support. This unique hybrid structure effectively traps platinum and palladium atomic clusters (Pt/Pd-ACs) with dimensions of 0.65 nm and 1.05 nm uniformly and firmly, forming novel carbon-supported metal nanocatalysts (Pt(Pd)-ACs/CNT @ GDY) for efficient hydrogen generation and aromatic nitroreduction, respectively. The Pt-ACs/CNT@GDY can deliver an HER current density of 10 mA cm^-2 with a small overpotential of 23 mV in 0.5 M H₂ SO₄ , showing a greatly enhanced mass activity, intrinsic activity than the commercial Pt/C catalyst. The Pd-ACs/CNT@GDY also exhibits excellent catalytic activity and a high turnover frequency of 38.0 min^-1 for aromatic nitroreduction. The carbon support turns out to possess excellent conductivity, abundant and uniform reactive sites, low redox potential, more negative surface and large specific surface area as well as a strong interaction with ACs, as anticipated in ideal supports, which can be applied in other metal-supported catalysts.

Novel cost-effective synthesis of non-doped turbostratic graphene from a graphite intercalation compound: development of a durable and stable electrocatalyst for the oxygen reduction reaction

A cost-effective novel preparation of turbostratic graphene and its efficient use as an electrocatalyst for the oxygen reduction reaction is presented here.

Magnetic-responsive Pickering emulsion and its catalytic application at the water–oil interface

Schematic diagram of interfacial catalysis reactions by MRGO–Pd Pickering emulsion.

Highly active ultrafine Pd NPs confined in imine-linked COFs for nitrobenzene hydrogenation

Ultrafine Pd NPs with an average size of 1.8 nm were stabilized on an imine-linked COF. The Pd/COF with electron rich surface properties and a high surface area showed high catalytic activity in the hydrogenation of nitrobenzene.

Novel mesoporous Ag@SiO2 nanospheres as a heterogeneous catalyst with superior catalytic performance for hydrogenation of aromatic nitro compounds

Mesoporous core–shell structure Ag@SiO₂ nanospheres are constructed to prevent Ag nanoparticles from aggregation during the hydrogenation reaction. The prepared catalyst shows superior catalytic performance for hydrogenation of nitro compounds with 100% conversion and selectivity without any by-products, which also indicates good recycling performance for several times use.

Mesoporous core–shell structure Ag@SiO₂ nanospheres are constructed to prevent Ag nanoparticles from aggregation during the hydrogenation reaction.

Cluster Superlattice Membranes

Cluster superlattice membranes consist of a two-dimensional hexagonal lattice of similar-sized nanoclusters sandwiched between single-crystal graphene and an amorphous carbon matrix. The fabrication process involves three main steps, the templated self-organization of a metal cluster superlattice on epitaxial graphene on Ir(111), conformal embedding in an amorphous carbon matrix, and subsequent lift-off from the Ir(111) substrate. The mechanical stability provided by the carbon-graphene matrix makes the membrane stable as a free-standing material and enables transfer to other substrates. The fabrication procedure can be applied to a wide variety of cluster materials and cluster sizes from the single-atom limit to clusters of a few hundred atoms, as well as other two-dimensional layer/host matrix combinations. The versatility of the membrane composition, its mechanical stability, and the simplicity of the transfer procedure make cluster superlattice membranes a promising material in catalysis, magnetism, energy conversion, and optoelectronics.

Silica Mesoporous Structures: Effective Nanocarriers in Drug Delivery and Nanocatalysts

The application of silica mesoporous structures in drug delivery and the removal of pollutants and organic compounds through catalytic reactions is increasing due to their unique characteristics, including high loading capacities, tunable pores, large surface areas, sustainability, and so on. This review focuses on very well-studied class of different construction mesoporous silica nano(particles), such as MCM-41, SBA-15, and SBA-16. We discuss the essential parameters involved in the synthesis of these materials with providing a diverse set of examples. In addition, the recent advances in silica mesoporous structures for drug delivery and catalytic applications are presented to fill the existing gap in the literature with providing some promising examples on this topic for the scientists in both industry and academia active in the field. Regarding the catalytic applications, mesoporous silica particles have shown some promises to remove the organic pollutants and to synthesize final products with high yields due to the ease with which their surfaces can be modified with various ligands to create appropriate interactions with target molecules. In the drug delivery process, as nanocarriers, they have also shown very good performance thanks to the easy surface functionalization but also adjustability of their porosities to providing in-vivo and in-vitro cargo delivery at the target site with appropriate rate.

The big effect of a small change: formation of CuO nanoparticles instead of covalently bound Cu(ii) over functionalized mesoporous silica and its impact on catalytic efficiency

Two different heterogeneous catalysts, one with Cu(ii) covalently bonded to functionalized mesoporous silica (FMS-Cu(II)) and another with CuO nanoparticles immobilized over the same silica (FMS-CuO-np), have been synthesized by a common route but with a minor alteration in the sequence of addition of reagents. It is interesting to find that by merely changing the order of the addition of reagents Cu(ii) can be incorporated into the framework in two different forms. In one case Cu(ii) binds to the N and O donor centers present in the functionalized material whereas in the other case CuO nanoparticles are generated in situ. The materials have been thoroughly characterized by powder X-ray diffraction, nitrogen adsorption/desorption, transmission electron microscopy, thermal analysis, FT-IR spectroscopy, solid state MAS-NMR spectroscopy and atomic absorption spectrophotometric studies. The synthesized products have been examined for their catalytic efficiencies in the oxidation of olefins, as a model case. Styrene, α-methyl styrene, cyclohexene, trans-stilbene and cyclooctene have been used as substrates in the presence of tert-butyl hydroperoxide as the oxidant in acetonitrile medium under mild conditions. The products of the catalytic reactions have been identified and estimated by gas chromatography and gas chromatography-mass spectrometry. The rate of conversion of the substrates for both the catalysts is high and the selectivity is also good. But from comparative studies, it is found that FMS-CuO-np which contains CuO nanoparticles shows better efficiency than FMS-Cu(II). The catalysts have been recycled for five catalytic cycles without showing much decrease in their catalytic activity.

Rapid Detection of Kaempferol Using Surface Molecularly Imprinted Mesoporous Molecular Sieves Embedded with Carbon Dots

This work demonstrates rapid sensing of kaempferol using active sensing material synthesized using the one-pot surface-imprinting synthesis method. This sensor consisted of molecularly imprinted polymer (MIP) consisting of mesoporous molecular sieves (SBA-15) loaded with carbon dots (CDs). Fourier transform infrared (FT-IR) spectroscopy confirmed successful incorporation of CDs onto the surface of imprinted mesoporous molecular sieves. Ordered hexagonal arrays of CDs@SBA-15@MIP mesopore structure were confirmed with transmission electron microscopy. Fluorescence intensity of CDs@SBA-15@MIP composites linearly correlated with kaempferol content in the 0.05-2 mg/L range. Detection limit was 14 μg/L. MIPs were used for efficient detection of kaempferol in fruit and vegetable samples with recovery values from 80% to 112%. The method has high sensitivity, low cost, good selectivity, and many application potentials useful for research and development of flavonoid monomer presence in food.

Efficient Noble-Metal-Free Catalysts Supported by Three-Dimensional Ordered Hierarchical Porous Carbon

Development of heterogeneous catalysts has attracted increasing attention, owing to their remarkable catalytic performance and recyclability. Herein, we report well-developed heterogeneous catalysts with a three-dimensional ordered hierarchical structure, constructed from nickel or cobalt nanoparticles embedded in porous carbon. The obtained catalysts were fully characterized by several techniques. On account of the uniform distribution of metal nanoparticles in the porous carbon matrix and large diffusion channels that allow for effective mass transport, the catalysts exhibited superior catalytic performance for styrene epoxidation reaction. In particular, the catalysts showed good catalytic activity, high selectivity and excellent recyclability toward the styrene epoxidation. Thus, this facile approach developed allows for fabricating advanced heterogeneous catalysts with high catalytic activities for useful practical applications.

Surfactant-Triggered Molecular Gate Tested on Different Mesoporous Silica Supports for Gastrointestinal Controlled Delivery

In recent decades, the versatility of mesoporous silica particles and their relevance to develop controlled release systems have been demonstrated. Within them, gated materials able to modulate payload delivery represent great advantages. However, the role played by the porous matrix in this kind of systems is scarce. In this work, different mesoporous silica materials (MCM-41, MCM-48, SBA-15 and UVM-7) are functionalized with oleic acid as a molecular gate. All systems are fully characterized and their ability to confine the entrapped cargo and release it in the presence of bile salts is validated with release assays and in vitro digestion experiments. The cargo release profile of each synthesized support is studied, paying attention to the inorganic scaffold. Obtained release profiles fit to Korsmeyer–Peppas model, which explains the differences among the studied supports. Based on the results, UVM-7 material was the most appropriate system for duodenal delivery and was tested in an in vivo model of the Wistar rat. Payload confinement and its complete release after gastric emptying is achieved, establishing the possible use of mesoporous silica particles as protection and direct release agents into the duodenum and, hence, demonstrating that these systems could serve as an alternative to the administration methods employed until now.

CoP/RGO-Pd Hybrids with Heterointerfaces as Highly Active Catalysts for Ethanol Electrooxidation

The ethanol oxidation reaction is of critical importance to the commercial viability of direct ethanol fuel cell technology. However, owing to the poor C-C bond cleavage capability, almost all ethanol oxidation is incomplete and suffers from low selectivity toward the C1 pathway. Herein, under the support of theoretical calculations that the heterointerfaces between CoP and Pd can reduce the energy barrier of C-C bond cleavage, rich heterointerfaces in CoP/RGO-Pd hybrids were designed to improve ethanol electrooxidation performance through enhancing the selectivity toward the C1 pathway. The experimental results show that the faradaic efficiency of the C1 pathway of CoP/RGO-Pd hybrids is as high as 27.6%, surpassing most reported catalysts in the literature. As a result of this enhancement, CoP/RGO-Pd10 exhibits mass activity as high as 4597 mA·mg_Pd^-1 and specific activity as high as 10 mA·cm^-2, which are much higher than those of other Pd-based electrocatalysts.