The manipulation of natural mineral chalcopyrite CuFeS2via mechanochemistry: properties and thermoelectric potential

In this study, the properties of the natural mineral chalcopyrite CuFeS2 after mechanical activation in a planetary mill were studied. The intensity of mechanical activation was controlled by changing the revolutions of the mill in the range 100-600 min-1. A series of characterization techniques, such as XRD, SEM, TEM, TA (DTA, TG, and DTG), particle size analysis, and UV-vis spectroscopy was applied and reactivity studies were also performed. Several new features were revealed for the mechanically activated chalcopyrite, e.g. the poly-modal distribution of produced nanoparticles on the micrometer scale, agglomeration effects by prolonged milling, possibility to modify the shape of the particles, X-ray amorphization and a shift from a non-cubic (tetragonal) structure to pseudo-cubic structure. The thermoelectric response was evaluated on the "softly" compacted powder via the spark plasma sintering method (very short holding time, low sintering temperature, and moderate pressure) by measuring the Seebeck coefficient and electrical and thermal conductivity above room temperature. The milling process produced samples with lower resistivity compared to the original non-activated sample. The Seebeck data close to zero confirmed the "compensated" character of natural chalcopyrite, reflecting its close-to stoichiometric composition with low concentration of both n- and p-type charge carriers. Alternatively, an evident correlation between thermal conductivity and energy supply by milling was observed with the possibility of band gap manipulation, which is associated with the energy delivered by the milling procedure.

Electronic, magnetic, optical and thermoelectric properties of co-doped Sn1-2x Mn x A x O2 (A = Mo, Tc): a first principles insight

The electronic, magnetic, optical and thermoelectric (TE) properties of Sn_1-2x Mn _x A _x O₂ (A = Mo/Tc) have been examined using density functional theory (DFT) based on the FP-LAPW approach. The results suggested that all the doped compounds show a half-metallic ferromagnet property with a 100% spin polarization at the Fermi level within GGA and mBJ. Moreover, doping SnO₂ with double impurities reduces the bandgap. The reduced bandgaps are the result of impurity states which arise due to the Mn and Mo/Tc doping, leading to the shifts of the minima of the conduction band towards the Fermi energy caused by substantial hybridization between transition metals 3d-4d and O-2p states. Also, the (Mn, Mo) co-doped SnO₂ system exhibits a ferromagnetic ground state which may be explained by the Zener double exchange mechanism. While the mechanism that controls the ferromagnetism in the (Mn, Tc) co-doped SnO₂ system is p-d hybridization. Therefore, the role of this study is to illustrate the fact that half-metallic ferromagnet material is a good absorber of sunlight (visible range) and couples to give a combined effect of spintronics with optronics. Our analysis shows that Sn_1-2x Mn _x Mo _x O₂ and Sn_1-2x Mn _x Tc _x O₂ are more capable of absorbing sunlight in the visible range compared to pristine SnO₂. In addition, we report a significant result for the thermoelectric efficiency ZT of ∼0.114 and ∼0.11 for Sn_1-2x Mn _x Mo _x O₂ and Sn_1-2x Mn _x Tc _x O₂, respectively. Thus, the coupling of these magnetic, optical, and thermoelectric properties in (Mn, A = Mo or Tc) co-doped SnO₂ can predict that these materials are suitable for optoelectronic and thermoelectric systems.

Thermoelectric Performance of n-Type Magnetic Element Doped Bi2S3

Thermoelectric technology offers great potential for converting waste heat into electrical energy and is an emission-free technique for solid-state cooling. Conventional high-performance thermoelectric materials such as Bi₂Te₃ and PbTe use rare or toxic elements. Sulfur is an inexpensive and nontoxic alternative to tellurium. However, achieving high efficiencies with Bi₂S₃ is challenging due to its high electrical resistivity that reduces its power factor. Here, we report Bi₂S₃ codoped with Cr and Cl to enhance its thermoelectric properties. An enhanced conductivity was achieved due to an increase in the carrier concentration by the substitution of S with Cl. High values of the Seebeck coefficients were obtained despite high carrier concentrations; this is attributed to an increase in the effective mass, resulting from the magnetic drag introduced by the magnetic Cr dopant. A peak power factor of 566 μW m^-1 K^-2 was obtained for a cast sample of Bi_2-x/3Cr _x/3S_3-x Cl _x with x = 0.01 at 320 K, as high as the highest values reported in the literature for sintered samples. These results support the success of codoping thermoelectric materials with isovalent magnetic and carrier concentration tuning elements to enhance the thermoelectric properties of eco-friendly materials.

Crystal Structure and Thermoelectric Properties of Novel Quaternary Cu2MHf3S8 (M-Mn, Fe, Co, and Ni) Thiospinels with Low Thermal Conductivity

Uncovering of the origin of intrinsically low thermal conductivity in novel crystalline solids is among the main streams in modern thermoelectricity. Because of their earth-abundant nature and environmentally friendly content, Cu-based thiospinels are attractive functional semiconductors, including thermoelectric (TE) materials. Herein, we report the crystal structure, as well as electronic and TE properties of four new Cu2MHf3S8 (M-Mn, Fe, Co, and Ni) thiospinels. The performed density functional theory calculations predicted the decrease of the band gap and transition from p- to n-type conductivity in the Mn-Fe-Co-Ni series, which was confirmed experimentally. The best TE performance in this work was observed for the Cu2NiHf3S8 thiospinel due to its highest power factor and low thermal conductivity. Moreover, all the discovered compounds possess very low lattice thermal conductivity κlat over the investigated temperature range. The κlat for Cu2CoHf3S8 has been found to be as low as 0.8 W m-1 K-1 at 298 K and 0.5 W m-1 K-1 at 673 K, which are significantly lower values compared to the other Cu-based thiospinels reported up to date. The strongly disturbed phonon transport of the investigated alloys mainly comes from the peculiar crystal structure where the large cubic unit cells contain many vacant octahedral voids. As it was evaluated from the Callaway approach and confirmed by the speed of sound measurements, such a crystal structure promotes the increase in lattice anharmonicity, which is the main reason for the low κlat. This work provides a guideline for the engineering of thermal transport in thiospinels and offers the discovered Cu2MHf3S8 (M-Mn, Fe, Co, and Ni) compounds, as new promising functional materials with low lattice thermal conductivity.

Understanding the role of 5d electrons in ferromagnetism and spin-based transport properties of K2W(Cl/Br)6 for spintronics and thermoelectric applications

The DFT calculation showed the half-metallic nature of K2WCl6 and K2WBr6 with their high Tc. Furthermore, the thermoelectric calculation showed that higher ZT values of K2WCl6 and K2WBr6 originated from ultra-low ke and high PF.

Recent Progress in Multiphase Thermoelectric Materials

Thermoelectric materials, which directly convert thermal energy to electricity and vice versa, are considered a viable source of renewable energy. However, the enhancement of conversion efficiency in these materials is very challenging. Recently, multiphase thermoelectric materials have presented themselves as the most promising materials to achieve higher thermoelectric efficiencies than single-phase compounds. These materials provide higher degrees of freedom to design new compounds and adopt new approaches to enhance the electronic transport properties of thermoelectric materials. Here, we have summarised the current developments in multiphase thermoelectric materials, exploiting the beneficial effects of secondary phases, and reviewed the principal mechanisms explaining the enhanced conversion efficiency in these materials. This includes energy filtering, modulation doping, phonon scattering, and magnetic effects. This work assists researchers to design new high-performance thermoelectric materials by providing common concepts.

Thermoelectric materials taking advantage of spin entropy: lessons from chalcogenides and oxides

The interplay between charges and spins may influence the dynamics of the carriers and determine their thermoelectric properties. In that respect, magneto-thermoelectric power MTEP, i.e. the measurements of the Seebeck coefficient S under the application of an external magnetic field, is a powerful technique to reveal the role of magnetic moments on S. This is illustrated by different transition metal chalcogenides: CuCrTiS4 and CuMnTiS4 magnetic thiospinels, which are compared with magnetic oxides, Curie-Weiss (CW) paramagnetic misfit cobaltites, ruthenates, either ferromagnetic perovskite or Pauli paramagnet quadruple perovskites, and CuGa1-x Mn x Te2 chalcopyrite telluride and Bi1.99Cr0.01Te3 in which diluted magnetism is induced by 3%-Mn and 1%-Cr substitution, respectively. In the case of a ferromagnet (below TC) and CW paramagnetic materials, the increase of magnetization at low T when a magnetic field is applied is accompanied by a decrease of the entropy of the carriers and hence S decreases. This is consistent with the lack of MTEP in the Pauli paramagnetic quadruple perovskites. Also, no significant MTEP is observed in CuGa1-x Mn x Te2 and Bi1.99Cr0.01Te3, for which Kondo-type interaction between magnetic moments and carriers prevails. In contrast, spin glass CuCrTiS4 exhibits negative MTEP like in ferromagnetic ruthenates and paramagnetic misfit cobaltites. This investigation of some chalcogenides and oxides provides key ingredients to select magnetic materials for which S benefits from spin entropy.

Mechanochemistry for Energy Materials: Impact of High-Energy Milling on Chemical, Electric and Thermal Transport Properties of Chalcopyrite CuFeS2 Nanoparticles

Chalcopyrite CuFeS2 , a semiconductor with applications in chemical sector and energy conversion engineering, was synthetized in a planetary mill from elemental precursors. The synthesis is environmentally friendly, waste-free and inexpensive. The synthesized nano-powders were characterized by XRD, SEM, EDX, BET and UV/Vis techniques, tests of chemical reactivity and, namely, thermoelectric performance of sintered ceramics followed. The crystallite size of ∼13 nm and the strain of ∼17 were calculated for CuFeS2 powders milled for 60, 120, 180 and 240 min, respectively. The evolution of characteristic band gaps, Eg, and the rate constant of leaching, k, of nano-powders are corroborated by the universal evolution of the parameter SBET /X (SBET -specific surface area, X-crystallinity) introduced for complex characterization of mechanochemically activated solids in various fields such as chemical engineering and/or energy conversion. The focus on non-doped semiconducting CuFeS2 enabled to assess the role of impurities, which critically and often negatively influence the thermoelectric properties.

Enhanced thermoelectric performance in polymorphic heavily Co-doped Cu2SnS3 through carrier compensation by Sb substitution

Heavily acceptor-doped Cu₂SnS₃ (CTS) shows promisingly large power factor (PF) due to its rather high electrical conductivity (σ) which causes a modest ZT with a high electronic thermal conductivity (κ_e ). In the present work, a strategy of carrier compensation through Sb-doping at the Sn site in Cu₂Sn_0.8Co_0.2S₃ was investigated, aiming at tailoring electrical and phonon transport properties simultaneously. Rietveld analysis suggested a complex polymorphic microstructure in which the cation-(semi)ordered tetragonal phase becomes dominant over the coherently bonded cation-disordered cubic phase, as is preliminarily revealed using TEM observation, upon Sb-doping and Sb would substitute Sn preferentially in the tetragonal structure. With increasing content of Sb, the σ was lowered and the Seebeck coefficient (S) was enhanced effectively, which gave rise to high PFs maintained at ~10.4 μWcm^-1K^-2 at 773 K together with an optimal reduction in κ_e by 60-70% in the whole temperature range. The lattice thermal conductivity was effectively suppressed from 1.75 Wm^-1K^-1 to ~1.2 Wm^-1K^-1 at 323 K while maintained very low at 0.3-0.4 Wm^-1K^-1 at 773 K. As a result, a peak ZT of ~0.88 at 773 K has been achieved for Cu₂Sn_0.74Sb_0.06Co_0.2S₃, which stands among the tops so far of the CTS-based diamond-like ternary sulfides. These findings demonstrate that polymorphic microstructures with cation-disordered interfaces as an approach to achieve effective phonon-blocking and low lattice thermal conductivity, of which further crystal chemistry, microstructural and electrical tailoring are possible by appropriate doping.

Structure, electronic and optical properties of chalcopyrite-type nano-clusters XFeY2 (X=Cu, Ag, Au; Y=S, Se, Te): a density functional theory study

Iron-based chalcopyrite materials have diverse applications in solar cells, spintronic, thermoelectric devices, LEDs and medical sciences. In this report we have studied structure, electronic and optical properties of chalcopyrite-type nano-cluster XFeY2 (X=Cu, Ag, Au; Y=S, Se, Te) systematically by using Density Functional Theory (DFT). Our computed HOMO-LUMO energy gap of XFeY2 is in the range of 1.568–3.982 eV, which endorses its potential application in optoelectronic devices and solar cells. The result shows that chalcopyrite-type material AuFeS2 having a star-type structure with point group C2v and sextet spin multiplicity, is the most stable cluster with HOMO-LUMO energy gap of 3.982 eV. The optical properties viz. optical electronegativity, refractive index, dielectric constant, IR and Raman activity of these nano-clusters are also investigated. The result exhibits that HOMO-LUMO energy gap of XFeY2 along with optical electronegativity and vibrational frequency decreases from S to Se to Te, whereas refractive index and dielectric constant increases in the reverse order.

Thioester synthesis through geoelectrochemical CO2 fixation on Ni sulfides

A prevailing scenario of the origin of life postulates thioesters as key intermediates in protometabolism, but there is no experimental support for the prebiotic CO₂ fixation routes to thioesters. Here we demonstrate that, under a simulated geoelectrochemical condition in primordial ocean hydrothermal systems (-0.6 to -1.0 V versus the standard hydrogen electrode), nickel sulfide (NiS) gradually reduces to Ni⁰, while accumulating surface-bound carbon monoxide (CO) due to CO₂ electroreduction. The resultant partially reduced NiS realizes thioester (S-methyl thioacetate) formation from CO and methanethiol even at room temperature and neutral pH with the yield up to 35% based on CO. This thioester formation is not inhibited, or even improved, by 50:50 coprecipitation of NiS with FeS or CoS (the maximum yields; 27 or 56%, respectively). Such a simple thioester synthesis likely occurred in Hadean deep-sea vent environments, setting a stage for the autotrophic origin of life.

Natural Radioactive Environments as Sources of Local Disequilibrium for the Emergence of Life

Certain subterranean environments of Earth have naturally accumulated long-lived radionuclides, such as ²³⁸U, ²³²Th, and ⁴⁰K, near the presence of liquid water. In these natural radioactive environments, water radiolysis can produce chemical species of biological importance, such as H₂. Although the proposal of radioactive decay as an alternative source of energy for living systems has existed for >30 years, this hypothesis gained strength after the recent discovery of a peculiar ecosystem in a gold mine in South Africa, whose existence is dependent on chemical species produced by water radiolysis. In this study, we calculate the chemical disequilibrium generated locally by water radiolysis due to gamma radiation. We then analyze the possible contribution of this disequilibrium for the emergence of life, considering conditions of early Earth and having as reference the alkaline hydrothermal vent theory. Results from our kinetic model point out the similarities between the conditions caused by water radiolysis and those found on alkaline hydrothermal systems. Our model produces a steady increase of pH with time, which favors the formation of a natural electrochemical gradient and the precipitation of minerals with catalytic activity for protometabolism in this aqueous environment. We conclude by describing a possible free-energy conversion mechanism based on protometabolism, which could be a requisite for the emergence of life in Hadean Earth.

SAKE: first-principles electron transport calculation code

We developed and implemented a numerical code called SAKE, which stands for (simulation code for atomistic Kohn-Sham equation). We developed it for first-principle electron transport calculations based on density-functional theory and non-equilibrium Green's function formalism. First, we present the central calculation parts of the formalism of the electronic states and transport properties for open and non-equilibrium systems. We show specific computational techniques, such as the use of a complex contour integration for charge density from the density matrix, which is compared with the calculation method of summing the residues of the Fermi-Dirac distribution, as well as the efficient achievement of the self-consistent procedures. Thereafter, for applications of the present computation code, SAKE, we present first-principle calculation results of three different systems. We first analyze electronic structures of polythiophene molecular wires, compare summation techniques for the density matrix. We show thermoelectric properties of an n-type antiferromagnetic semiconductor CuFeS2as a second application. The electrical conductance, electrical thermal conductance, and the Seebeck coefficients with carrier doping are examined, and the analytical form of the Seebeck coefficient is briefly described. For the third application, we analyze the electron transport properties of polyaniline molecular wires under structural deformations, i.e. rotations around the transport direction. The thermally averaged current-voltage characteristics are also analyzed. The results show that the current decreases as the temperature increases which are determined based on the competition between the thermal energy and the electronic energy, which increases with the rotation angle.

A strategy for boosting the thermoelectric performance of famatinite Cu3SbS4

Famatinite Cu₃SbS₄ has attracted attention for its potential application in thermoelectric (TE) contexts. In this work, we report the impacts of co-substituting Ge and P for Sb on TE properties. Melting and heat treatment methods were adopted to synthesize samples of Cu₃Sb_1-x-yGe_xP_yS₄ (x≤ 0.4, y≤ 0.3). In this system, Ge functioned as an acceptor for doping a hole to the valence band, which led to enhancement of the TE power factor. Contrastingly, P barely altered the electronic structure. Furthermore, both Ge and P acted as point defects, which effectively decreased lattice thermal conductivity. The combined effects of the co-substitution gave rise to an enhanced dimensionless figure of merit, ZT, of 0.67 at 673 K.

Improvement in the thermoelectric properties of porous networked Al-doped ZnO nanostructured materials synthesized via an alternative interfacial reaction and low-pressure SPS processing

This work presents a novel, simpler and faster bottom-up approach to produce relatively high performance thermoelectric Al-doped ZnO ceramics from nanopowders produced by interfacial reaction followed by consolidation with Spark Plasma Sintering.

Design of Domain Structure and Realization of Ultralow Thermal Conductivity for Record-High Thermoelectric Performance in Chalcopyrite

Chalcopyrite compound CuGaTe₂ is the focus of much research interest due to its high power factor. However, its high intrinsic lattice thermal conductivity seriously impedes the promotion of its thermoelectric performance. Here, it is shown that through alloying of isoelectronic elements In and Ag in CuGaTe₂ , a quinary alloy compound system Cu_{1- x} Ag_x Ga_0.4 In_0.6 Te₂ (0 ≤ x ≤ 0.4) with complex nanosized strain domain structure is prepared. Due to strong phonon scattering mainly by this domain structure, thermal conductivity (at 300 K) drops from 6.1 W m^-1 K^-1 for the host compound to 1.5 W m^-1 K^-1 for the sample with x = 0.4. As a result, the optimized chalcopyrite sample Cu_0.7 Ag_0.3 Ga_0.4 In_0.6 Te₂ presents an outstanding performance, with record-high figure of merit (ZT) reaching 1.64 (at 873 K) and average ZT reaching 0.73 (between ≈300 and 873 K), which are ≈37 and ≈35% larger than the corresponding values for pristine CuGaTe₂ , respectively, demonstrating that such domain structure arising from isoelectronic multielement alloying in chalcopyrite compound can effectively suppress its thermal conductivity and elevate its thermoelectric performance remarkably.

Indium thiospinel In1-x□xIn2S4- structural characterization and thermoelectric properties

A detailed study of polycrystalline indium-based In_1-x□_xIn₂S₄ (x = 0.16, 0.22, 0.28, and 0.33) thiospinel is presented (□- vacancy). Comprehensive investigation of synthesis conditions, phase composition and thermoelectric properties was performed by means of various diffraction, microscopic and spectroscopic methods. Single-phase α- and β-In_1-x□_xIn₂S₄ were found in samples with 0.16 ≤x≤ 0.22 and x = 0.33 (In₂S₃), respectively. In contrast, it is shown that In_0.72□_0.28In₂S₄ contains both α- and β-polymorphic modifications. Consequently, the thermoelectric characterization of well-defined α- and β-In_1-x□_xIn₂S₄ is conducted for the first time. α-In_1-x□_xIn₂S₄ (x = 0.16 and 0.22) revealed n-type semiconducting behavior, a large Seebeck coefficient (>|200|μV K^-1) and moderate charge carrier mobility on the level of ∼20 cm² V^-1 s^-1 at room temperature (RT). Decreases in charge carrier concentration (increase of electrical resistivity) and thermal conductivity (even below 0.6 W m^-1 K^-1 at 760 K) for larger In-content are observed. Although β-In_0.67□_0.33In₂S₄ (β-In₂S₃) is a distinct polymorphic modification, it followed the abovementioned trend in thermal conductivity and displayed significantly higher charge carrier mobility (∼10⁴ cm² V^-1 s^-1 at RT). These findings indicate that structural disorder in the α-modification affects both electronic and thermal properties in this thiospinel. The reduction of thermal conductivity counterbalances a lowered power factor and, thus, the thermoelectric figure of merit ZT_max = 0.2 at 760 K is nearly the same for both α- and β-In_1-x□_xIn₂S₄.

Structural stability and thermoelectric performance of high quality synthetic and natural pyrites (FeS2)

Single crystalline pyrite of high quality reveals good thermal- and bad electrical conductivities resulting in poor thermoelectric performance.

The Paleomineralogy of the Hadean Eon Revisited

A preliminary list of plausible near-surface minerals present during Earth’s Hadean Eon (>4.0 Ga) should be expanded to include: (1) phases that might have formed by precipitation of organic crystals prior to the rise of predation by cellular life; (2) minerals associated with large bolide impacts, especially through the generation of hydrothermal systems in circumferential fracture zones; and (3) local formation of minerals with relatively oxidized transition metals through abiological redox processes, such as photo-oxidation. Additional mineral diversity arises from the occurrence of some mineral species that form more than one ‘natural kind’, each with distinct chemical and morphological characteristics that arise by different paragenetic processes. Rare minerals, for example those containing essential B, Mo, or P, are not necessary for the origins of life. Rather, many common minerals incorporate those and other elements as trace and minor constituents. A rich variety of chemically reactive sites were thus available at the exposed surfaces of common Hadean rock-forming minerals.

Chemical Diversity of Metal Sulfide Minerals and Its Implications for the Origin of Life

Prebiotic organic synthesis catalyzed by Earth-abundant metal sulfides is a key process for understanding the evolution of biochemistry from inorganic molecules, yet the catalytic functions of sulfides have remained poorly explored in the context of the origin of life. Past studies on prebiotic chemistry have mostly focused on a few types of metal sulfide catalysts, such as FeS or NiS, which form limited types of products with inferior activity and selectivity. To explore the potential of metal sulfides on catalyzing prebiotic chemical reactions, here, the chemical diversity (variations in chemical composition and phase structure) of 304 natural metal sulfide minerals in a mineralogy database was surveyed. Approaches to rationally predict the catalytic functions of metal sulfides are discussed based on advanced theories and analytical tools of electrocatalysis such as proton-coupled electron transfer, structural comparisons between enzymes and minerals, and in situ spectroscopy. To this end, we introduce a model of geoelectrochemistry driven prebiotic synthesis for chemical evolution, as it helps us to predict kinetics and selectivity of targeted prebiotic chemistry under “chemically messy conditions”. We expect that combining the data-mining of mineral databases with experimental methods, theories, and machine-learning approaches developed in the field of electrocatalysis will facilitate the prediction and verification of catalytic performance under a wide range of pH and Eh conditions, and will aid in the rational screening of mineral catalysts involved in the origin of life.

Geochemistry and the Origin of Life: From Extraterrestrial Processes, Chemical Evolution on Earth, Fossilized Life's Records, to Natures of the Extant Life

In 2001, the first author (S.N.) led the publication of a book entitled "Geochemistry and the origin of life" in collaboration with Dr. Andre Brack aiming to figure out geo- and astro-chemical processes essential for the emergence of life. Since then, a great number of research progress has been achieved in the relevant topics from our group and others, ranging from the extraterrestrial inputs of life's building blocks, the chemical evolution on Earth with the aid of mineral catalysts, to the fossilized records of ancient microorganisms. Here, in addition to summarizing these findings for the origin and early evolution of life, we propose a new hypothesis for the generation and co-evolution of photosynthesis with the redox and photochemical conditions on the Earth's surface. Besides these bottom-up approaches, we introduce an experimental study on the role of water molecules in the life's function, focusing on the transition from live, dormant, and dead states through dehydration/hydration. Further spectroscopic studies on the hydrogen bonding behaviors of water molecules in living cells will provide important clues to solve the complex nature of life.

Geoelectrodes and Fuel Cells for Simulating Hydrothermal Vent Environments

Gradients generated in hydrothermal systems provide a significant source of free energy for chemosynthetic life and may play a role in present-day habitability on ocean worlds. Electron/proton/ion gradients, particularly in the context of hydrothermal chimney structures, may also be relevant to the origins of life on Earth. Hydrothermal vents are similar in some ways to typical fuel cell devices: redox/pH gradients between seawater and hydrothermal fluid are analogous to the fuel cell oxidant and fuel reservoirs; the porous chimney wall is analogous to a separator or ion-exchange membrane and is also a conductive path for electrons; and the hydrothermal minerals are analogous to electrode catalysts. The modular and scalable characteristics of fuel cell systems make for a convenient planetary geology test bed in which geologically relevant components may be assembled and investigated in a controlled simulation environment. We have performed fuel cell experiments and electrochemical studies to better understand the catalytic potential of seafloor minerals and vent chimneys, using samples from a black smoker vent chimney as an initial demonstration. In a fuel cell with Na⁺-conducting Nafion^® membranes and liquid fuel/oxidant reservoirs (simulating the vent environment), the black smoker mineral catalyst in the membrane electrode assembly was effective in reducing O₂ and oxidizing sulfide. In a H₂/O₂ polymer electrolyte membrane (PEM) fuel cell with H⁺-conducting Nafion membranes, the black smoker catalyst was effective in reducing O₂ but not in oxidizing H₂. These fuel cell experiments accurately simulated the redox reactions that could occur in a geological setting with this particular catalyst, and also tested whether the minerals are sufficiently active to replace a commercial fuel cell catalyst. Similar experiments with other geocatalysts could be utilized to test which redox reactions could be driven in other hydrothermal systems, including hypothesized vent systems on other worlds.

Lanthanide Contraction as a Design Factor for High-Performance Half-Heusler Thermoelectric Materials

Forming solid solutions, as an effective strategy to improve thermoelectric performance, has a dilemma that alloy scattering will reduce both the thermal conductivity and carrier mobility. Here, an intuitive way is proposed to decouple the opposite effects, that is, using lanthanide contraction as a design factor to select alloying atoms with large mass fluctuation but small radius difference from the host atoms. Typical half-Heusler alloys, n-type (Zr,Hf)NiSn and p-type (Nb,Ta)FeSb solid solutions, are taken as paradigms to attest the validity of this design strategy, which exhibit greatly suppressed lattice thermal conductivity and maintained carrier mobility. Furthermore, by considering lanthanide contraction, n-type (Zr,Hf)CoSb-based alloys with high zT of ≈1.0 are developed. These results highlight the significance of lanthanide contraction as a design factor in enhancing the thermoelectric performance and reveal the practical potential of (Zr,Hf)CoSb-based half-Heusler compounds due to the matched n-type and p-type thermoelectric performance.

Ultrahigh Power Factor in Thermoelectric System Nb0.95M0.05FeSb (M = Hf, Zr, and Ti)

Conversion efficiency and output power are crucial parameters for thermoelectric power generation that highly rely on figure of merit ZT and power factor (PF), respectively. Therefore, the synergistic optimization of electrical and thermal properties is imperative instead of optimizing just ZT by thermal conductivity reduction or just PF by electron transport enhancement. Here, it is demonstrated that Nb0.95Hf0.05FeSb has not only ultrahigh PF over ≈100 µW cm-1 K-2 at room temperature but also the highest ZT in a material system Nb0.95M0.05FeSb (M = Hf, Zr, Ti). It is found that Hf dopant is capable to simultaneously supply carriers for mobility optimization and introduce atomic disorder for reducing lattice thermal conductivity. As a result, Nb0.95Hf0.05FeSb distinguishes itself from other outstanding NbFeSb-based materials in both the PF and ZT. Additionally, a large output power density of ≈21.6 W cm-2 is achieved based on a single-leg device under a temperature difference of ≈560 K, showing the realistic prospect of the ultrahigh PF for power generation.

Geoelectrochemical CO production: Implications for the autotrophic origin of life

Wächtershäuser's proposal of the autotrophic origin of life theory and subsequent laboratory demonstrations of relevant organic reactions have opened a new gate for the exploration of the origin of life. However, this scenario remains controversial because, at present, it requires a high pressure of CO as a source of carbon and reducing energy, although CO must have been a trace C species on the Hadean Earth. We show that, simulating a geoelectrochemical environment in deep-sea hydrothermal fields, CO production with up to ~40% Faraday efficiency was attainable on CdS in CO₂-saturated NaCl solution at ≤-1 V (versus the standard hydrogen electrode). The threshold potential is readily generated in the H₂-rich, high-temperature, and alkaline hydrothermal vents that were probably widespread on the early komatiitic and basaltic ocean crust. Thus, Wächtershäuser's scenario starting from CO₂ was likely to be realized in the Hadean ocean hydrothermal systems.

Why Does CuFeS2 Resemble Gold?

While several potential applications of CuFeS₂ quantum dots have already been reported, doubts regarding their optical and physical properties persist. In particular, it is unclear if the quantum dot material is metallic, a degenerately doped semiconductor, or else an intrinsic semiconductor material. Here we examine the physical properties of CuFeS₂ quantum dots in order to address this issue. Specifically, we study the bump that is observed in the optical spectra of these quantum dots at ∼500 nm. Using a combination of structural and optical characterization methods, ultrafast spectroscopy, as well as electronic structure calculations, we ascertain that the unusual purple color of CuFeS₂ quantum dots as well the golden luster of CuFeS₂ films arise from the existence of a plasmon resonance in these materials. While the presence of free carriers causes this material to resemble gold, surface treatments are also described to suppress the plasmon resonance altogether.

Anodic and Cathodic Extracellular Electron Transfer by the Filamentous Bacterium Ardenticatena maritima 110S

Ardenticatena maritima strain 110S is a filamentous bacterium isolated from an iron-rich coastal hydrothermal field, and it is a unique isolate capable of dissimilatory iron or nitrate reduction among the members of the bacterial phylum Chloroflexi. Here, we report the ability of A. maritima strain 110S to utilize electrodes as a sole electron acceptor and donor when coupled with the oxidation of organic compounds and nitrate reduction, respectively. In addition, multicellular filaments with hundreds of cells arranged end-to-end increased the extracellular electron transfer (EET) ability to electrodes by organizing filaments into bundled structures, with the aid of microbially reduced iron oxide minerals on the cell surface of strain 110S. Based on these findings, together with the attempt to detect surface-localized cytochromes in the genome sequence and the demonstration of redox-dependent staining and immunostaining of the cell surface, we propose a model of bidirectional electron transport by A. maritima strain 110S, in which surface-localized multiheme cytochromes and surface-associated iron minerals serve as a conduit of bidirectional EET in multicellular filaments.

Low temperature thermoelectric and magnetoresistive properties of Tl2Cu3FeQ4 (Q = S, Se, Te)

Layered Tl₂Cu₃FeSe₄ and Tl₂Cu₃FeTe₄ possess low thermal conductivity, of which the selenide offers promising thermoelectric features and the presence of Fe in the weakly connected Cu square-net substructure results in intriguing ferromagnetic and magnetoresistance features.

Novel Principles and Nanostructuring Methods for Enhanced Thermoelectrics

Thermoelectrics (TE), the direct solid-state conversion of waste heat to electricity, is a promising field with potential wide-scale application for power generation. Intrinsic conflicts in the requirements for high electrical conductivity but (a) low thermal conductivity and (b) a large Seebeck coefficient have made enhancing TE performance difficult. Several recent striking advances in the field are reviewed. In regard to the former conflict, notable bottom-up nanostructuring methods for phonon-selective scattering are discovered, namely using nanosheets, dislocations, and most strikingly a process to fabricate nano-micropores leading to a 100% enhancement in the figure of merit (ZT ≈ 1.6) for rare-earth-free skutterudites. Porous materials are hitherto considered as having poor TE performance, so this is a new paradigm. In regard to the latter conflict, nanocomposite materials with hybrid effects and use of magnetism are emerging as novel bottom-up methods to enhance TE. Material informatics efforts to identify high-ZT materials are also reviewed.

Spontaneous and Widespread Electricity Generation in Natural Deep-Sea Hydrothermal Fields

Deep-sea hydrothermal vents discharge abundant reductive energy into oxidative seawater. Herein, we demonstrated that in situ measurements of redox potentials on the surfaces of active hydrothermal mineral deposits were more negative than the surrounding seawater potential, driving electrical current generation. We also demonstrated that negative potentials in the surface of minerals were widespread in the hydrothermal fields, regardless of the proximity to hydrothermal fluid discharges. Lab experiments verified that the negative potential of the mineral surface was induced by a distant electron transfer from the hydrothermal fluid through the metallic and catalytic properties of minerals. These results indicate that electric current is spontaneously and widely generated in natural mineral deposits in deep-sea hydrothermal fields. Our discovery provides important insights into the microbial communities that are supported by extracellular electron transfer and the prebiotic chemical and metabolic evolution of the ocean hydrothermal systems.

Unique magnetic and thermoelectric properties of chemically functionalized narrow carbon polymers

We analyze magnetic, transport and thermoelectric properties of narrow carbon polymers, which are chemically functionalized with nitroxide groups. Numerical calculations of the electronic band structure and the corresponding transmission function are based on density functional theory. Transport and thermoelectric parameters are calculated in the linear response regime, with particular interest in charge and spin thermopowers (charge and spin Seebeck effects). Such nanoribbons are shown to have thermoelectric properties described by large thermoelectric efficiency, which makes these materials promising from the application point of view.

Tailoring the structure and thermoelectric properties of BaTiO3via Eu2+ substitution

The presence of filled Eu²⁺ 4f states at the top of the valence band significantly affect the electrical transport properties of Ba_1−xEu_xTiO_3−δ compounds.

Layered structure of the near-surface region of oxidized chalcopyrite (CuFeS2): hard X-ray photoelectron spectroscopy, X-ray absorption spectroscopy and DFT+U studies

Metal-depleted layers with different S species are found, and mechanisms for their formation and metal sulfide ‘passivation’ are proposed.

CuFeS2 Quantum Dots and Highly Luminescent CuFeS2 Based Core/Shell Structures: Synthesis, Tunability, and Photophysics

We report the synthesis of copper iron sulfide (CuFeS2) quantum dots (QDs). These materials exhibit a tunable band gap that spans the range 0.5-2 eV (600-2500 nm). Although the as-prepared material is nonemissive, CuFeS2/CdS core/shell structures are shown to exhibit quantum yields that exceed 80%. Like other members of the I-III-VI2 family QDs, CuFeS2 based nanoparticles exhibit a long-lived emission that is significantly red-shifted compared to the band gap. CuFeS2 QDs are unique in terms of their composition. In particular, these QDs are the only band-gap-tunable infrared chromophore composed entirely of elements with atomic numbers less than 30.

Thermoelectric properties of the chalcopyrite Cu1−xMxFeS2−y series (M = Mn, Co, Ni)

This study presents the thermoelectric properties of the substituted on the Cu site and/or sulfur deficiency CuFeS₂ chalcopyrite based series Cu_1−xMxFeS_2−y (M = Mn, Co, Ni, x ≤ 0.05 and y ≤ 0.02).