Versatile Room-Temperature-Phosphorescent Materials Prepared from N-Substituted Naphthalimides: Emission Enhancement and Chemical Conjugation

Water-Ice Microstructures and Hydration States of Acridinium Iodide Studied by Phosphorescence Spectroscopy

Ice has been suggested to have played a significant role in the origin of life partly owing to its ability to concentrate organic molecules and promote reaction efficiency. However, the techniques for studying organic molecules in ice are absorption-based, which limits the sensitivity of measurements. Here we introduce an emission-based method to study organic molecules in water ice: the phosphorescence displays high sensitivity depending on the hydration state of an organic salt probe, acridinium iodide (ADI). The designed ADI aqueous system exhibits phosphorescence that can be severely perturbed when the temperature is higher than 110 K at a concentration of the order of 10-5 M, indicating changes in hydration for ADI. Using the ADI phosphorescent probe, it is found that the microstructures of water ice, i.e., crystalline vs. glassy, can be strongly dictated by a trace amount (as low as 10-5 M) of water-soluble organic molecules. Consistent with cryoSEM images and temperature-dependent Raman spectral data, the ADI is dehydrated in more crystalline ice and hydrated in more glassy ice. The current investigation serves as a starting point for using more sensitive spectroscopic techniques for studying water-organics interactions at a much lower concentration and wider temperature range.

Room-temperature phosphorescence from organic materials in aqueous media

In recent years, organic materials with room-temperature phosphorescence (RTP) features have gained significant attention due to their wide applications in the fields of bioimaging, light-harvesting materials, encryption technology, etc. Although several examples of organic RTP materials in the crystalline state and polymer-based systems have been reported in the last decade or so, achieving organic RTP in the solution phase, particularly in the aqueous phase has remained a challenging task. Herein in this review, we summarize the progress in this direction by highlighting design strategies based on supramolecular scaffolding and host-guest complexation and the applications of such aqueous organic RTP materials in bioimaging, sensing, etc.

Excellent Persistent Near-Infrared Room Temperature Phosphorescence from Highly Efficient Host-Guest Systems

Organic near-infrared (NIR) room temperature phosphorescence (RTP) materials become a hot topic in bioimaging and biosensing for the large penetration depth and high signal-to-background ratio (SBR). However, it is challenging to achieve persistent NIR phosphorescence for severe nonradiative transitions by energy-gap law. Herein, a universal system with persistent NIR RTP is built by visible (host) and NIR phosphorescence (guest) materials, which can efficiently suppress the nonradiative transitions by rigid environment of crystalline host materials with good matching, and further promote phosphorescence emission by the additional phosphorescence resonance energy transfer (≈100%) between them. The persistent NIR phosphorescence with ten-folds enhancement of RTP lifetimes, compared to those of guest luminogens, can be achieved by modulation of aggregated structures of host-guest systems. This work provides a convenient way to largely prolong the phosphorescence lifetimes of various NIR luminogens, promoting their application in afterglow imaging with deeper penetration and higher SBRs.

Stretchable phosphorescent polymers by multiphase engineering

Stretchable phosphorescence materials potentially enable applications in diverse advanced fields in wearable electronics. However, achieving room-temperature phosphorescence materials simultaneously featuring long-lived emission and good stretchability is challenging because it is hard to balance the rigidity and flexibility in the same polymer. Here we present a multiphase engineering for obtaining stretchable phosphorescent materials by combining stiffness and softness simultaneously in well-designed block copolymers. Due to the microphase separation, copolymers demonstrate an intrinsic stretchability of 712%, maintaining an ultralong phosphorescence lifetime of up to 981.11 ms. This multiphase engineering is generally applicable to a series of binary and ternary initiator systems with color-tunable phosphorescence in the visible range. Moreover, these copolymers enable multi-level volumetric data encryption and stretchable afterglow display. This work provides a fundamental understanding of the nanostructures and material properties for designing stretchable materials and extends the potential of phosphorescence polymers.

Unique Visualization Growth Process of Long-Lived Room Temperature Phosphorescence in Polymer System

Recently, embedding organic phosphors into the polyvinyl alcohol (PVA) matrix has emerged as a convenient strategy to obtain efficient long-lived room temperature phosphorescence (RTP) via forming strong intermolecular hydrogen bonds with organic phosphors to minimize nonradiative relaxations. Regrettably, it is discovered that PVA is unable to trigger RTP emission when a novel functional phosphor THBE containing six extended biphenyl formaldehyde arms is doped into PVA matrix. Surprisingly, the excellent long-lived RTP emission can be easily obtained by doping THBE into PVA analogs, poly(vinyl alcohol-co-ethylene) (PVA-co-PE). The unique visualization growth process (i.e., white streak generation) of long-lived RTP is observed by UV light-driven aggregation of functional molecules THBE in PVA-co-PE matrix. The phosphorescent intensity of the luminescent film is enhanced by 55 times, from 729 to 40,785 a.u., and its phosphorescence lifetime is increased by 38 times, from 37.08 to 1415.41 ms. Due to the dynamically reversible RTP performance, as well as the permeability, flexibility, and wrinkle-free properties of the luminescent film, it can be utilized to create cutting-edge information storage devices.

Purely Organic Room-Temperature Phosphorescence Molecule for High-Performance Non-Doped Organic Light-Emitting Diodes

Purely organic molecules with room-temperature phosphorescence (RTP) are potential luminescent materials with high exciton utilization for organic light-emitting diodes (OLEDs), but those exhibiting superb electroluminescence (EL) performances are rarely explored, mainly due to their long phosphorescence lifetimes. Herein, a robust purely organic RTP molecule, 3,6-bis(5-phenylindolo[3,2-a]carbazol-12(5H)-yl)-xanthen-9-one (3,2-PIC-XT), is developed. The neat film of 3,2-PIC-XT shows strong green RTP with a very short lifetime (2.9 μs) and a high photoluminescence quantum yield (72 %), and behaviors balanced bipolar charge transport. The RTP nature of 3,2-PIC-XT is validated by steady-state and transient absorption and emission spectroscopies, and the working mechanism is deciphered by theoretical simulation. Non-doped multilayer OLEDs using thin neat films of 3,2-PIC-XT furnish an outstanding external quantum efficiency (EQE) of 24.91 % with an extremely low roll-off (1.6 %) at 1000 cd m-2. High-performance non-doped top-emitting and tandem OLEDs are also achieved, providing remarkable EQEs of 24.53 % and 42.50 %, respectively. Delightfully, non-doped simplified OLEDs employing thick neat films of 3,2-PIC-XT are also realized, furnishing an excellent EQE of 17.79 % and greatly enhanced operational lifetime. The temperature-dependent and transient EL spectroscopies demonstrate the electrophosphorescence attribute of 3,2-PIC-XT. These non-doped OLEDs are the best devices based on purely organic RTP materials reported so far.

Supermolecular Confined Silicon Phosphorescence Nanoprobes for Time-Resolved Hypoxic Imaging Analysis

Room temperature phosphorescence (RTP) nanoprobes play crucial roles in hypoxia imaging due to their high signal-to-background ratio (SBR) in the time domain. However, synthesizing RTP probes in aqueous media with a small size and high quantum yield remains challenging for intracellular hypoxic imaging up to present. Herein, aqueous RTP nanoprobes consisting of naphthalene anhydride derivatives, cucurbit[7]uril (CB[7]), and organosilicon are reported via supermolecular confined methods. Benefiting from the noncovalent confinement of CB[7] and hydrolysis reactions of organosilicon, such small-sized RTP nanoprobes (5-10 nm) exhibit inherent tunable phosphorescence (from 400 to 680 nm) with microsecond second lifetimes (up to ∼158.7 μs) and high quantum yield (up to ∼30%). The as-prepared RTP nanoprobes illustrate excellent intracellular hypoxia responsibility in a broad range from ∼0.1 to 21% oxygen concentrations. Compared to traditional fluorescence mode, the SBR value (∼108.69) of microsecond-range time-resolved in vitro imaging is up to 2.26 times greater in severe hypoxia (<0.1% O2), offering opportunities for precision imaging analysis in a hypoxic environment.

Tryptophan-Doped Poly(vinyl alcohol) Films with Ultralong-Lifetime Room-Temperature Phosphorescence and Color-Tunable Afterglow Under Ambient Conditions

The development of a persistent luminescence system with long-lived phosphorescence and color-tunable afterglow at room temperature represents a challenge, largely due to the intensive non-radiative deactivation pathway. In this study, an ultralong-lived room temperature phosphorescence (RTP) system has been achieved using a hydrogen-bonding strategy where poly(vinyl alcohol) (PVA) matrices were doped with tryptophan (Trp) derivatives. The PVA film doped with N-α-(9-Fluorenylmethoxycarbonyl)-L-tryptophan (Fmoc-L-Trp) exhibited a long-lived phosphorescence emission of up to 3859.70 ms, and a blue afterglow for a duration greater than 34 s, under ambient conditions. The introduction of two other fluorescent dyes (i. e., Rhodamine B and Basicred14) to the PVA film facilitates adjustment to the color of the afterglow from blue to orange, and pink, by a triplet-to-singlet Förster-resonance energy transfer (TS-FRET) process. These films have been successfully applied in silk-screen printing and in multicolor afterglow light-emitting diode (LED) arrays.

Recent progress in ion-regulated organic room-temperature phosphorescence

Organic room-temperature phosphorescence (RTP) materials have attracted considerable attention for their extended afterglow at ambient conditions, eco-friendliness, and wide-ranging applications in bio-imaging, data storage, security inks, and emergency illumination. Significant advancements have been achieved in recent years in developing highly efficient RTP materials by manipulating the intermolecular interactions. In this perspective, we have summarized recent advances in ion-regulated organic RTP materials based on the roles and interactions of ions, including the ion-π interactions, electrostatic interactions, and coordinate interactions. Subsequently, the current challenges and prospects of utilizing ionic interactions for inducing and modulating the phosphorescent properties are presented. It is anticipated that this perspective will provide basic guidelines for fabricating novel ionic RTP materials and further extend their application potential.

Dopants Induce Persistent Room Temperature Phosphorescence in Triarylamine Boronate Esters

Purely organic materials exhibiting room temperature phosphorescence (RTP) are promising candidates for oxygen sensors and information encryption owing to their cost-effective and environmentally friendly nature. Herein, we report a bimolecular RTP system where DTBU acts as the guest and TBBU serves as the host. In contrast to previously reported results, we find that both pure DTBU and TBBU do not exhibit RTP in the solid state even under N2 atmosphere. A DTBU/TBBU system with a low doping ratio (0.1 mol %) exhibits persistent yellowish-green afterglow with a lifetime of 340 ms and is highly sensitive to oxygen. A DTBU/TBBU system with a higher doping ratio (10 mol %) maintains a phosphorescence lifetime of 179 ms under air. Applications of DTBU/TBBU at varied doping ratios in both oxygen sensing and information encryption are demonstrated. We propose that the T1 state of TBBU acts as an energy transfer intermediate between Tn and T1 of DTBU, ultimately leading to the generation of persistent RTP. Overall, this work demonstrates the critical importance of material purity in the design of RTP systems, and how an understanding of host-guest doping enables their photophysical properties to be precisely tuned.

Solvent-Free Organic Liquids: An Efficient Fluid Matrix for Unexplored Functional Hybrid Materials

ConspectusThe invention of solvent-free organic liquids (SOLs) was serendipitous. However, the curiosity-driven research in the later stage delivered new soft materials with exciting optical, and optoelectronic properties along with appealing physical characteristics suitable for the futuristic applications. A slight change in the molecular design resulted in a drastic change in the physical state of molecules demonstrating monomer-like features in the bulk. The basic idea of core isolation has been successful in delivering new SOLs with attractive functional properties. The unique fluid matrix associated with SOLs offers a tremendous opportunity for making hybrid materials by simple mixing. The chance to study the fundamentally important electron transfer, energy transfer, charge transfer interactions, triplet-state emissions, and even detailed NMR experiments in the solvent-free neat state is the major attraction of SOLs. Usually, solvents and their polarity control such molecular properties, and in the case of SOLs, it avoids the use of solvents to study such fundamentally important properties. Besides, SOLs protect the triplet emitters and excited state processes involving triplet states from quenchers and make the analysis possible under ambient conditions.Our effort in this direction was focused on tuning the ground and excited state properties by transforming conventional organic molecules to SOLs and further value addition by preparing the hybrid SOLs. We developed a series of hybrid SOLs, exploring room-temperature phosphorescence, thermally activated delayed fluorescence, charge or energy transfer between donor and acceptor SOLs, selective explosive sensing, etc. A slight variation in the chemical structure or optoelectronic properties of the individual components imparted exciting optical features for the hybrid SOLs. It includes nonemissive charge transfer, tunable emission exciplex, room temperature phosphorescence, and thermally activated delayed fluorescence SOLs. The liquid matrix of donor SOLs accommodated varying amounts of acceptor SOLs to tune the ground and excited state features. In all examples of donor-acceptor-based hybrid SOLs, even a low amount of acceptor, such as a donor-acceptor ratio of 1000:1, can cause pronounced optical properties. Hence, the evaluation of the optical properties of SOLs, especially, in the absence of solvents is so special that it avoids the interference of solvent molecules. Still, the major drawback of SOLs remains unsolved until we report polymerizable SOLs. Although a large variety of SOLs have been reported in the literature, the long-lasting problem of surface stickiness of SOLs was resolved by polymerizable SOLs. It enabled the development of flexible, foldable, and stretchable large-area luminescent films suitable for lighting and display devices. In this Account, we summarize our work on SOLs, hybrid SOLs, polymerizable SOLs, and the application of SOLs in selective sensing of explosives. Finally, an outlook on the feasibility of luminescent polymerizable SOLs in futuristic applications is provided.

Synthesis, Characterization, and Properties of Sila-Annulated Phenanthrene Imides

A series of sila-annulated phenanthrene imides were synthesized through a three-step synthetic route, which represent a hybrid class of biphenyl-based π-conjugated molecules incorporating an imide unit and silole. A comprehensive investigation of their structural, photophysical, and electronic properties was studied by experiment and theoretical calculations. Notably, sila-annulated phenanthrene imides with significant aggregation-induced emission (AIE) properties were observed.

Switching thermally activated delayed fluorescence to room temperature phosphorescence for oxygen sensing: Effect of donor substituents of trifluoromethylphenyl

Two compounds consisting of electron-accepting trifluoromethylphenyl moiety and electron-donating phenoxazine and phenothiazine moieties were designed and synthesized via Buchwald-Hartwig coupling reaction. Thermal, photophysical, and electrochemical properties of the compounds are discussed. Only compound with phenothiazine form molecular glass, with glass transition temperatures of 90 °C. The geometry and electronic characteristics of the compounds were substantiated within density functional theory (DFT). 10,10'-(2-(Trifluoromethyl)-1,4-phenylene)bis(10H-phenoxazine) shows efficient thermally activated delayed fluorescence with high spin-orbit coupling values. 10,10'-(2-(Trifluoromethyl)-1,4-phenylene)bis(10H-phenothiazine) as efficient room-temperature phosphor shows high oxygen sensitivity.

Fused-Ring Pyrrole-Based Near-Infrared Emissive Organic RTP Material for Persistent Afterglow Bioimaging

Organic near-infrared room temperature phosphorescence (RTP) materials offer remarkable advantages in bioimaging due to their characteristic time scales and background noise elimination. However, developing near-infrared RTP materials for deep tissue imaging still faces challenges since the small band gap may increase the non-radiative decay, resulting in weak emission and short phosphorescence lifetime. In this study, fused-ring pyrrole-based structures were employed as the guest molecules for the construction of long wavelength emissive RTP materials. Compared to the decrease of the singlet energy level, the triplet energy level showed a more effectively decrease with the increase of the conjugation of the substituent groups. Moreover, the sufficient conjugation of fused ring structures in the guest molecule suppresses the non-radiative decay of triplet excitons. Therefore, a near-infrared RTP material (764 nm) was achieved for deep penetration bioimaging. Tumor cell membrane is used to coat RTP nanoparticles (NPs) to avoid decreasing the RTP performance compared to traditional coating by amphiphilic surfactants. RTP NPs with tumor-targeting properties show favorable phosphorescent properties, superior stability, and excellent biocompatibility. These NPs are applied for time-resolved luminescence imaging to eliminate background interference with excellent tissue penetration. This study provides a practical solution to prepare long-wavelength and long-lifetime organic RTP materials and their applications in bioimaging.

Ambient Phosphor with High Efficiency and Long Lifetime in Poly(Methyl Methacrylate) Through Charge-Transfer-Mediated Triplet Exciton Formation for Photolithography Applications

Currently, purely organic compounds showing ambient phosphorescence with high efficiency (ΦP ) and ultra-long lifetime (τP ) are quite rare and often need to be achieved in hydrophilic poly(vinyl alcohol)-based hosts. This severely limits their applications. Here, we provide a solution to this issue by constructing an ortho-linked donor-acceptor (D-A) dyad whose D moiety has not only a long-lived T1 state to achieve a long τP , but also a Tn state that is close to the S1 state of the dyad to trigger effective spin-orbit charge transfer intersystem crossing (SOCT-ISC). The rationality of this strategy was validated by a new phosphor OF-BCz that is able to show a τP of 1.92 s and a ΦP of 30 % even in a less rigid matrix of poly(methyl methacrylate) (PMMA). Excitingly, OF-BCz exhibited its potential as both a photocuring initiator and an in situ quality indicator, allowing for the visual detection of defects in photolithographic patterning.

Disorder-Enhanced Charge-Transfer-Mediated Room-Temperature Phosphorescence in Polymer Media

Room-temperature phosphorescence (RTP) polymers have important applications for biological imaging, oxygen sensing, data encryption, and photodynamic therapy. Despite the many advantages polymeric materials offer such as great control over gas permeability and processing flexibility, disorder is traditionally considered as an intrinsic negative impact on the efficiency for embedded RTP luminophores, as various allowed thermal motions could quench the emitting states. However, we propose that such disorder-enabled freedoms of microscopic motions can be beneficial for charge-transfer-mediated RTP, which is facilitated by molecular conformational changes among different electronic transition states. Using the "classic" pyrene-aniline exciplex as an example, we demonstrate the mutual enhancement of red/near-infrared and green RTP emissions from the pyrene and aniline moieties, respectively, upon doping the aniline polymer with trace pyrene derivatives. In comparison, a pyrene-doped crystal formed with the same aniline structure exhibits only charge-transfer fluorescence with no red or green RTP observed, suggesting that order suppresses the RTP channels. The proposed polymerization strategy may be used as a unified method to generate multi-emissive polymeric RTP materials from a vast pool of known and unknown exciplexes and charge-transfer complexes.

Room-temperature phosphorescent materials derived from natural resources

Room-temperature phosphorescent (RTP) materials have enormous potential in many different areas. Additionally, the conversion of natural resources to RTP materials has attracted considerable attention. Owing to their inherent luminescent properties, natural materials can be efficiently converted into sustainable RTP materials. However, to date, only a few reviews have focused on this area of endeavour. Motivated by this lack of coverage, in this Review, we address this shortcoming and introduce the types of natural resource available for the preparation of RTP materials. We mainly focus on the inherent advantages of natural resources for RTP materials, strategies for activating and enhancing the RTP properties of the natural resources as well as the potential applications of these RTP materials. In addition, we discuss future challenges and opportunities in this area of research.

A Heavy-atom-free Molecular Motif Based on Symmetric Bird-like Structured Tetraphenylenes with Room-Temperature Phosphorescence (RTP) Afterglow over 8 s

In recent years, pure organic room-temperature phosphorescence (RTP) with highly efficient and long-persistent afterglow has drawn substantial awareness. Commonly, spin-orbit coupling can be improved by introducing heavy atoms into pure-organic molecules. However, this strategy will simultaneously increase the radiative and non-radiative transition rate, further resulting in dramatic decreases in the excited state lifetime and afterglow duration. Here in this work, a highly symmetric bird-like structure tetraphenylene (TeP), and its three symmetrical halogenated derivatives (TeP-F, TeP-Cl and TeP-Br) are synthesized, while their RTP properties and mechanisms are systematically investigated by both theoretical and experimental approaches. As the results, the rigid, highly twisted conformation of TeP restricts the non-radiative processes of RTP and gives rise to the enhancement of electron-exchange, which can contribute to the RTP radiation process. Despite the faint RTP of the bromine and chlorine-substituted ones (TeP-Br, TeP-Cl), the fluoro-substituted TeP-F exhibited a long phosphorescent lifetime up to 890 ms, corresponding to an extremely long RTP afterglow over 8 s, which could be incorporated into the best series of non-heavy-atom RTP materials reported in previous literature.

The Green Box: Selenoviologen-Based Tetracationic Cyclophane for Electrochromism, Host-Guest Interactions, and Visible-Light Photocatalysis

The novel selenoviologen-based tetracationic cyclophanes (green boxes 3 and 5) with rigid electron-deficient cavities are synthesized via S_N2 reactions in two steps. The green boxes exhibit good redox properties, narrow energy gaps, and strong absorption in the visible range (370-470 nm), especially for the green box 5 containing two selenoviologen (SeV²⁺) units. Meanwhile, the femtosecond transient absorption (fs-TA) reveals that the green boxes have a stabilized dicationic biradical, high efficiency of intramolecular charge transfer (ICT), and long-lived charge separation state due to the formation of cyclophane structure. Based on the excellent photophysical and redox properties, the green boxes are applied to electrochromic devices (ECDs) and visible-light-driven hydrogen production with a high H₂ generation rate (34 μmol/h), turnover number (203), and apparent quantum yield (5.33 × 10^-2). In addition, the host-guest recognitions are demonstrated between the green boxes and electron-rich guests (e.g., G1:1-naphthol and G2:platinum(II)-tethered naphthalene) in MeCN through C-H···π and π···π interactions. As a one-component system, the host-guest complexes of green box⊃G2 are successfully applied to visible-light photocatalytic hydrogen production due to the intramolecular electron transfer (IET) between platinum(II) of G2 and SeV²⁺ of the green box, which provides a simplified system for solar energy conversion.

Supramolecular glasses with color-tunable circularly polarized afterglow through evaporation-induced self-assembly of chiral metal-organic complexes

The fabrication of chiral molecules into macroscopic systems has many valuable applications, especially in the fields of optical displays, data encryption, information storage, and so on. Here, we design and prepare a serious of supramolecular glasses (SGs) based on Zn-L-Histidine complexes, via an evaporation-induced self-assembly (EISA) strategy. Metal-ligand interactions between the zinc(II) ion and chiral L-Histidine endow the SGs with interesting circularly polarized afterglow (CPA). Multicolored CPA emissions from blue to red with dissymmetry factor as high as 9.5 × 10^-3 and excited-state lifetime up to 356.7 ms are achieved under ambient conditions. Therefore, this work not only communicates the bulk SGs with wide-tunable afterglow and large circular polarization, but also provides an EISA method for the macroscopic self-assembly of chiral metal-organic hybrids toward photonic applications.

Functional Roles of Polymers in Room-Temperature Phosphorescent Materials: Modulation of Intersystem Crossing, Air Sensitivity and Biological Activity

Organic room-temperature phosphorescent (RTP) materials routinely incorporate polymeric components, which usually act as non-functional or "inert" media to protect excited-state phosphors from thermal and collisional quenching, but are lesser explored for other influences. Here, we report some exemplary "active roles" of polymer matrices played in organic RTP materials, including: 1) color modulation of total delayed emissions via balancing the population ratio between thermally-activated delayed fluorescence (TADF) and RTP due to dielectric-dependent intersystem crossing; 2) altered air sensitivity of RTP materials by generating various surface morphologies such as nano-sized granules; 3) enhanced bacterial elimination for enhanced electrostatic interactions with negatively charged bio-membranes. These active roles demonstrated that the vast library of polymeric structures and functionalities can be married to organic phosphors to broaden new application horizons for RTP materials.

Boosting the Phosphorescence Efficiency in Doped Organic Crystals: Critical Role of Hydrogen Bonding

Host-guest doping systems with phthalimides (BI) and N-methylphthalimide (NMeBI) as the host and 1,8-naphthalimide (NI) and 4-bromo-1,8-naphthalimide (4BrNI) as the guest have been developed. The 0.2% NI/BI (molar ratio) with a strong C=O···H-N hydrogen bond exhibited a phosphorescence quantum efficiency (29.2%) higher than that of NI/NMeBI with a weak C=O···H-C hydrogen bond (10.1%). A similar trend was observed in the 4BrNI guest system. A remarkable phosphorescent efficiency of 42.1% was achieved in a 0.5% 4BrNI/BI composite, which represents the highest value in NI-based phosphors. This research indicates stronger hydrogen bonding may have a greater contribution in boosting the phosphorescence efficiency.

Sensitive room-temperature phosphorescence for luminometric and visual monitoring of the dynamic evolution of acrylate-vinylidene chloride copolymers

Unlike fluorescence, room-temperature phosphorescence (RTP) has never been utilized to monitor the dynamic variation of polymer. In the present study, acrylate-vinylidene chloride (VDC) copolymers were doped with a good RTP molecule, N-hydroxyethyl 4-bromo-1,8-naphthalimide (HBN). During the maturation process, marked RTP-intensity enhancement of HBN was observed due to the crystallinity increase of copolymers, verified by X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). For ensuring the more efficient RTP emission of HBN, copolymers with a higher content of crystallizable VDC segments and a more polar acrylate comonomer, i.e. methyl acrylate (MA) were preferred. According to the RTP characterizations, the following deductions could be obtained: (1) Maturation for 8-9 days at room temperature was needed for the copolymers with a high VDC content to ensure the complete crystallization; (2) Raising the maturation temperature to 50 and 70 °C not only accelerated the crystallization rate, but also increased the crystallinity of copolymers; (3) RTP method was more sensitive to the slight crystallinity variation than XRD and FTIR. Moreover, the dynamic maturation processes of acrylate-VDC copolymers could be also visually monitored through contacting with certain organic solvents that led to the emission color transition from orange to blue.

Conjugation-Modulated Excitonic Coupling Brightens Multiple Triplet Excited States

The design and regulation of multiple room-temperature phosphorescence (RTP) processes are formidably challenging due to the restrictions imposed by Kasha's rule. Here, we report a general design principle for materials that show multiple RTP processes, which is informed by our study of four compounds where there is modulation of the linker hybridization between donor (D) and acceptor (A) groups. Theoretical modeling and photophysical experiments demonstrate that multiple RTP processes can be achieved in sp³ C-linked D-A compounds due to the arrest of intramolecular electronic communication between two triplet states (T₁^H and T₁^L) localized on the donor and acceptor or between two triplet states, one localized on the donor and one delocalized across aggregated acceptors. However, for the sp² C-linked D-A counterparts, RTP from one locally excited T₁ state is observed because of enhanced excitonic coupling between the two triplet states of molecular subunits. Single-crystal and reduced density gradient analyses reveal the influence of molecular packing on the coincident phosphorescence processes and the origin of the observed aggregate phosphorescence. These findings provide insights into higher-lying triplet excited-state dynamics and into a fundamental design principle for designing compounds that show multiple RTP.

Dynamic B/N Lewis Pairs: Insights into the Structural Variations and Photochromism via Light-Induced Fluorescence to Phosphorescence Switching

Ultralong afterglow emissions due to room-temperature phosphorescence (RTP) are of paramount importance in the advancement of smart sensors, bioimaging and light-emitting devices. We herein present an efficient approach to achieve rarely accessible phosphorescence of heavy atom-free organoboranes via photochemical switching of sterically tunable fluorescent Lewis pairs (LPs). LPs are widely applied in and well-known for their outstanding performance in catalysis and supramolecular soft materials but have not thus far been exploited to develop photo-responsive RTP materials. The intramolecular LP M1BNM not only shows a dynamic response to thermal treatment due to reversible N→B coordination but crystals of M1BNM also undergo rapid photochromic switching. As a result, unusual emission switching from short-lived fluorescence to long-lived phosphorescence (rad-M1BNM, τ_RTP =232 ms) is observed. The reported discoveries in the field of Lewis pairs chemistry offer important insights into their structural dynamics, while also pointing to new opportunities for photoactive materials with implications for fast responsive detectors.

Ultralong Organic Phosphorescence: From Material Design to Applications

Organic phosphorescence is defined as a radiative transition between the different spin multiplicities of an organic molecule after excitation; here, we refer to the photoexcitation. Unlike fluorescence, it shows a long emission lifetime (∼μs), large Stokes shift, and rich excited state properties, attracting considerable attention in organic electronics during the past years. Ultralong organic phosphorescence (UOP), a type of persistent luminescence in organic phosphors, shows an emission lifetime of over 100 ms normally according to the resolution limit of the naked eye. According to the Jablonski energy diagram, two prerequisites are necessary for UOP generation and enhancement. One is to promote intersystem crossing (ISC) of the excitons from the excited singlet to triplet states by enhancing the spin-orbit coupling (SOC); the other is to suppress the nonradiative transitions of the excitons from the excited triplet states.In this Account, we will give a summary of our research on ultralong organic phosphorescence, including the design of materials, manipulation of properties, fabrication of nano/microstructures, and function applications. First, we give a brief introduction to the UOP development. Then, we discuss the constructed methods of UOP materials from the inter/intramolecular interaction types, including π-π interactions, intermolecular hydrogen bonds, halogen bonds, ionic bonds, covalent bonds, and so on. These effective interactions can build a rigid environment to restrain the nonradiative transitions from the molecular motions or external quenching by oxygen, moisture, or heat, and thus enhance the UOP performance. Next, the manipulation of UOP properties, containing excitation wavelength, emission colors, lifetimes, and quantum efficiency (QE), through molecular or crystal engineering will be summarized. Recently, the excitation wavelengths of the materials for UOP can be regulated in different regions, such as UV, visible light, and X-ray; the emission colors of UOP can cover the whole visible-light region, from deep blue to red; the phosphorescence lifetime of UOP materials can reach 2.5 s, and the quantum efficiency can be achieved up to 96.5%. Moreover, we will present the fabrication of micro/nanoscale UOP materials, including the preparation of micro/nanostructure, optical performance, and device fabrication. Afterward, we will review the potential applications of UOP materials in organic/bio-optoelectronics, such as information encryption, bioimaging, sensing, afterglow display, etc. Finally, an outlook on the development of UOP materials and applications will be proposed.

A copper-catalyzed four-component reaction of arylcyclopropanes, nitriles, carboxylic acids and N-fluorobenzenesulfonimide: facile synthesis of imide derivatives

An unprecedented copper-catalyzed four-component reaction of arylcyclopropanes, nitriles, carboxylic acids and N-fluorobenzenesulfonimide (NFSI) has been successfully developed, which represents the first example of a four-component reaction of non-donor-acceptor cyclopropanes. A wide range of imide derivatives were efficiently synthesized in excellent yields under mild conditions.

Simple Stimulus-Responsive Organic Long Persistent Luminescence Systems Based on Methoxy-Functionalized Triphenylphosphine

Triarylphosphine-based pure organic long persistent luminescence materials are rarely investigated because of their poor stability and low photoluminescence quantum yield. Herein, we demonstrate that the introduction of a methoxy group (TPP-o-3OMe) at the ortho position of triphenylphosphine (TPP) can essentially promote the n → π* transition and promote intersystem crossing to generate more triplet excitons. Simultaneously, generating abundant intramolecular and intermolecular hydrogen bonds to stable excited triplet excitons is beneficial, thereby causing high-efficiency phosphorescence emission (τ_p = 394.1 ms; Φ_p = 9.28%). Interestingly, it shows a good acid response to protonic acids and can often be cycled many times under the heating or ammonia fumigation conditions. This research provides a new idea for enriching the types of pure organic room-temperature phosphorescent materials, widening their applications in the fields of anticounterfeiting and smart response, and promotes the further development of this field.

H-Bonding Room Temperature Phosphorescence Materials via Facile Preparation for Water-Stimulated Photoluminescent Ink

Pure organic room-temperature phosphorescence (RTP) materials built upon noncovalent interactions have attracted much attention because of their high efficiency, long lifetime, and stimulus-responsive behavior. However, there are limited reports of noncovalent RTP materials because of the lack of specific design principles and clear mechanisms. Here, we report on a noncovalent material prepared via facile grinding that can emit fluorescence and RTP emission differing from their components’ photoluminescent behavior. Exciplex can be formed during the preparation process to act as the minimum emission unit. We found that H-bonds in the RTP system provide restriction to nonradiative transition but also enhance energy transformation and energy level degeneracy in the system. Moreover, water-stimulated photoluminescent ink is produced from the materials to achieve double-encryption application with good resolution.

Schiff Base Aggregation-Induced Emission Luminogens for Sensing Applications: A Review

Fluorescence sensing can not only identify a target substrate qualitatively but also achieve the purpose of quantitative detection through the change of the fluorescence signal. It has the advantages of immense sensitivity, rapid response, and excellent selectivity. The proposed aggregation-induced emission (AIE) concept solves the problem of the fluorescence of traditional fluorescent molecules becoming weak or quenched in high concentration or aggregated state conditions. Schiff base fluorescent probes have the advantages of simple synthesis, low toxicity, and easy design. They are often used for the detection of various substances. In this review we cover late developments in Schiff base compounds with AIE characteristics working as fluorescence sensors.

Photo-thermo-induced room-temperature phosphorescence through solid-state molecular motion

The development of smart-responsive materials, in particular those with non-invasive, rapid responsive phosphorescence, is highly desirable but has rarely been described. Herein, we designed and prepared a series of molecular rotors containing a triazine core and three bromobiphenyl units: o-Br-TRZ, m-Br-TRZ, and p-Br-TRZ. The bromine and triazine moieties serve as room temperature phosphorescence-active units, and the bromobiphenyl units serve as rotors to drive intramolecular rotation. When irradiated with strong ultraviolet photoirradiation, intramolecular rotations of o-Br-TRZ, m-Br-TRZ, and p-Br-TRZ increase, successively resulting in a photothermal effect via molecular motions. Impressively, the photothermal temperature attained by p-Br-TRZ is as high as 102 °C, and synchronously triggers its phosphorescence due to the ordered molecular arrangement after molecular motion. The thermal effect is expected to be important for triggering efficient phosphorescence, and the photon input for providing a precise and non-invasive stimulus. Such sequential photo-thermo-phosphorescence conversion is anticipated to unlock a new stimulus-responsive phosphorescence material without chemicals invasion.

The development of non-invasive, rapid responsive phosphorescence is highly desirable but has rarely been described. Herein, the authors designed and prepare a series of molecular rotors containing a room temperature phosphorescence active triazine core and three bromobiphenyl units acting as rotors and demonstrate light stimulus triggered phosphorescence.

Binding model-tuned room-temperature phosphorescence of the bromo-naphthol derivatives based on cyclodextrins

Herein, bromo-naphthol derivatives were synthesized to investigate the influence on their phosphorescence emission efficiency resulting from different binding models with cyclodextrins. And the results indicated that α-cyclodextrin could result in the highest phosphorescence emission efficiency, due to the tight encapsulation of the bromo-naphthol motif into the cavity.

Bromo-naphthol derivatives were synthesized to form host–guest complexation with cyclodextrins with different cavity sizes for the investigation of binding model-mediated room-temperature phosphorescence efficiency.

Synergistic Generation and Accumulation of Triplet Excitons for Efficient Ultralong Organic Phosphorescence

The traditional method to achieve ultralong organic phosphorescence (UOP) is to hybrid nπ* and ππ* configurations in appropriate proportion, which are contradictory to each other for improving efficiency and lifetime of phosphorescence. In this work, through replacing the electron-donating aromatic group with a methoxy group and combining intramolecular halogen bond to promote intersystem crossing and suppress non-radiative transition, an efficient UOP molecule (2Br-OSPh) has been synthesized with the longest lifetime and brightest UOP among its isomers. As compared to CzS2Br, which has a similar substituted position of bromine atom and a larger k_isc (the rate of intersystem crossing), the smaller ΔE_TT* (the energy gap between monomeric phosphorescence and aggregated state phosphorescence) in 2Br-OSPh could accelerate the transition from T₁ to T₁ *. This research indicates that both generation and accumulation of triplet excitons play an important role in realizing efficient UOP materials.

Metal-Free Organic Phosphors toward Fast and Efficient Room-Temperature Phosphorescence

ConspectusMetal-free purely organic phosphors (POPs) are promising materials for display technologies, solid-state lighting, and sensors platforms because of their advantageous properties such as large design windows, easy processability, and economic material cost. Unlike inorganic semiconductors, creating the conditions for triplet excitons to produce light in organic materials is a demanding task because of the presence of electron spin configurations that undergo spin-forbidden transitions, which is usually facilitated by spin-orbit coupling (SOC). In the absence of heavy metals, however, the SOC efficiency in POPs remains low, and consequently, external nonradiative photophysical processes will also severely affect triplet excitons. Addressing these challenges requires the development of rational molecular design principles to accurately account for how all conceivable structural, electronic, chemical, compositional factors affect materials performance.This Account summarizes important molecular design and matrix engineering strategies to tackle the two key challenges for POPs─boosting SOC efficiencies and suppressing nonradiative decays. We start by reviewing the fundamental understanding of internal and external factors affecting the emission efficiencies of POPs, including the theory behind SOC and the origin of nonradiative decays. Subsequently, we discuss the design of contemporary POP systems on the basis of research insights from our group and others, where SOC is mostly promoted by heavy atom effects and the El-Sayed rule. On one hand, nonmetal heavy atoms including Br, I, or Se provide the heavy atom effects to boost SOC. On the other hand, the El-Sayed rule addresses the necessity of orbital angular momentum change in SOC and the general utilization of carbonyl, heterocyclic rings, and other moieties with rich nonbonding electrons. Because of the slow-decaying nature of triplet excitons, engineering the matrices of POPs is critical to effectively suppress collisional quenching as the major nonradiative decay route, thus achieving POPs with decent room temperature quantum efficiency. For that purpose, crystalline or rigid amorphous matrices have been implemented along with specific intermolecular forces between POPs and their environment.Despite the great efforts made in the past decade, the intrinsic SOC efficiencies of POPs remain low, and their emission lifetimes are pinned in the millisecond to second regime. While this is beneficial for POPs with ultralong emission, designing high-SOC POPs with simultaneous fast decay and high quantum efficiencies is particularly advantageous for display systems. Following the design of contemporary POPs, we will discuss molecular design descriptors that could potentially break the current limit to boost internal SOC in purely organic materials. Our recently developed concept of "heavy atom oriented orbital angular momentum manipulation" will be discussed, accompanied by a rich and expanded library of fast and efficient POP molecules, which serves as a stepping stone into the future of this field. We will conclude this Account by discussing the noteworthy application of POPs in organic light-emitting diodes (OLEDs), solid-state lighting, and sensors, as well as the remaining challenges in the design of fast and efficient POPs.

Crystallization induced room-temperature phosphorescence and chiral photoluminescence properties of phosphoramides

We report the design and synthesis of a series of room temperature phosphorescent phosphoramides TPTZPO, TPTZPS, and TPTZPSe with a donor (phenothiazine)-acceptor (P = X, X = O, S, and Se) architecture. All the compounds show structureless fluorescence with a nanosecond lifetime in dilute solutions. However, these compounds show dual fluorescence and room temperature phosphorescence (RTP) in the solid state. Both the intensity and energy of luminescence depend on the heteroatom attached to the phosphorus center. For example, compound TPTZPO with the P[double bond, length as m-dash]O unit exhibits fluorescence at a higher energy region than TPTZPS and TPTZPSe with the P[double bond, length as m-dash]S and P[double bond, length as m-dash]Se groups, respectively. Crystalline samples of TPTZPO, TPTZPS, and TPTZPSe show stronger RTP than the amorphous powder of respective compounds. Detailed steady-state, time-resolved photoluminescence and computational studies established that the 3n-π* state dominated by the phenothiazine moiety is the emissive state of these compounds. Although TPTZPS and TPTZPSe crystallized in the chiral space group, only TPTZPSe showed chiroptical properties in the solid state. The luminescence dissymmetry factor (g lum) value of TPTZPS is small and below the detection limit, and a CPL spectrum could not be observed for this compound.

Aggregation‐Induced Dual Phosphorescence from ( o ‐Bromophenyl)‐Bis(2,6‐Dimethylphenyl)Borane at Room Temperature

Designing highly efficient purely organic phosphors at room temperature remains a challenge because of fast non‐radiative processes and slow intersystem crossing (ISC) rates. The majority of them emit only single component phosphorescence. Herein, we have prepared 3 isomers (o, m, p‐bromophenyl)‐bis(2,6‐dimethylphenyl)boranes. Among the 3 isomers (o‐, m‐ and p‐BrTAB) synthesized, the ortho‐one is the only one which shows dual phosphorescence, with a short lifetime of 0.8 ms and a long lifetime of 234 ms in the crystalline state at room temperature. Based on theoretical calculations and crystal structure analysis of o‐BrTAB, the short lifetime component is ascribed to the T₁^M state of the monomer which emits the higher energy phosphorescence. The long‐lived, lower energy phosphorescence emission is attributed to the T₁^A state of an aggregate, with multiple intermolecular interactions existing in crystalline o‐BrTAB inhibiting nonradiative decay and stabilizing the triplet states efficiently.

Clustering and halogen effects enabled red/near-infrared room temperature phosphorescence from aliphatic cyclic imides

Pure organic room temperature phosphorescence (RTP) materials become increasingly important in advanced optoelectronic and bioelectronic applications. Current phosphors based on small aromatic molecules show emission characteristics generally limited to short wavelengths. It remains an enormous challenge to achieve red and near-infrared (NIR) RTP, particularly for those from nonaromatics. Here we demonstrate that succinimide derived cyclic imides can emit RTP in the red (665, 690 nm) and NIR (745 nm) spectral range with high efficiencies of up to 9.2%. Despite their rather limited molecular conjugations, their unique emission stems from the presence of the imide unit and heavy atoms, effective molecular clustering, and the electron delocalization of halogens. We further demonstrate that the presence of heavy atoms like halogen or chalcogen atoms in these systems is important to facilitate intersystem crossing as well as to extend through-space conjugation and to enable rigidified conformations. This universal strategy paves the way to the design of nonconventional luminophores with long wavelength emission and for emerging applications.

Pure organic room temperature phosphorescence (RTP) materials become increasingly important but achieving red and near-infrared (NIR) RTP remains challenging. Here, the authors demonstrate that succinimide derived cyclic imides can emit RTP in the red and NIR spectral range with outstanding efficiencies of up to 9.2%.

A Descriptor for Accurate Predictions of Host Molecules Enabling Ultralong Room-Temperature Phosphorescence in Guest Emitters

Although doping can induce room-temperature phosphorescence (RTP) in heavy-atom free organic systems, it is often challenging to match the host and guest components to achieve efficient intersystem crossing for activating RTP. In this work, we developed a simple descriptor ΔE to predict host molecules for matching the guest RTP emitters, based on the intersystem crossing via higher excited states (ISCHES) mechanism. This descriptor successfully predicted five commercially available host components to pair with naphthalimide (NA) and naphtho[2,3-c]furan-1,3-dione (2,3-NA) emitters with a high accuracy of 83 %. The yielded pairs exhibited bright yellow and green RTP with the quantum efficiency up to 0.4 and lifetime up to 1.67 s, respectively. Using these RTP pairs, we successfully achieved multi-layer message encryption. The ΔE descriptor could provide an efficient way for developing doping-induced RTP materials.

White Emissions Containing Room Temperature Phosphorescence from Different Excited States of a D-π-A Molecule Depending on the Aggregate States

Development of pure organic molecular materials with room temperature phosphorescence (RTP) and their applications for white emitters have received significant attentions recently. Herein, a D-π-A molecule (DMACPPY) which can realize white emitting under ambient conditions both in the crystal state and the doped-film state by combining RTP with two fluorescent emissions is reported. The white emission from the crystalline sample of DMACPPY consists fluorescence from S₂ (the second excited singlet state) and S₁ (the first excited singlet state) along with RTP from T₁ (the first excited triplet state), namely, SST-type white light. While, the white emission from the poly methyl methacrylate (PMMA) film doped with DMACPPY contains fluorescences from S₂ and S₁ , and RTP from T₂ (the second excited triplet state) rather than T₁ (STS type). DMACPPY cannot exhibit white spectrum within alternative crystalline state since inferior RTP intensity despite similar ternary emissions. The results demonstrate that the emissive properties for excited states of DMACPPY can be tuned by changing the aggregate state from crystalline to dispersion state in PMMA film. This new RTP emitter fulfills the talent for white emitting and achieves dual-mode white emissions, invisibly, expands the application range for pure organic and heavy atom-free RTP materials.

Heavy atom oriented orbital angular momentum manipulation in metal-free organic phosphors

Metal-free purely organic phosphors (POPs) are emerging materials for display technologies, solid-state lighting, and chemical sensors. However, due to limitations in contemporary design strategies, the intrinsic spin-orbit coupling (SOC) efficiency of POPs remains low and their emission lifetime is pinned in the millisecond regime. Here, we present a design concept for POPs where the two main factors that control SOC-the heavy atom effect and orbital angular momentum-are tightly coupled to maximize SOC. This strategy is bolstered by novel natural-transition-orbital-based computational methods to visualize and quantify angular momentum descriptors for molecular design. To demonstrate the effectiveness of this strategy, prototype POPs were created having efficient room-temperature phosphorescence with lifetimes pushed below the millisecond regime, which were enabled by boosted SOC efficiencies beyond 102 cm-1 and achieved record-high efficiencies in POPs. Electronic structure analysis shows how discrete tuning of heavy atom effects and orbital angular momentum is possible within the proposed design strategy, leading to a strong degree of control over the resulting POP properties.

Intense Organic Afterglow Enabled by Molecular Engineering in Dopant-Matrix Systems

We report intense dopant-matrix afterglow systems with an afterglow efficiency (Φ_AG) of 47% and an afterglow lifetime (τ_AG) of 1.3 s. Luminescent difluoroboron β-diketonate (BF₂bdk) dopants and their deuterated counterparts are designed with naphthalene and carboxylic acid groups. After doping into benzoic acid (BA) matrices, room-temperature afterglow brightness and afterglow duration of the BF₂bdk-BA materials have unexpectedly been found to reach the levels of those at 77 K, which indicates that hydrogen bonding between BF₂bdk and BA, as well as the deuteration technique, can reduce k_nr + k_q of BF₂bdk triplets to very small values even at room temperature. Detailed studies reveal that the BF₂bdk possesses typical ¹ICT characters in the S₁ state and distinct ³LE composition in the T₁ state, and thus shows a high Φ_ISC and a small k_P to obtain a high Φ_AG and a long τ_AG. Besides, triplet-triplet annihilation has been found in the dopant-matrix system at high doping concentrations to further increase Φ_AG.

Supramolecular assembly confined purely organic room temperature phosphorescence and its biological imaging

Purely organic room temperature phosphorescence, especially in aqueous solution, is attracting increasing attention owing to its large Stokes shift, long lifetime, low preparation cost, low toxicity, good processing performance advantages, and broad application value.