White-Fluorescent Dual-Emission Mechanosensitive Membrane Probes that Function by Bending Rather than Twisting

Capturing the Progressive Conformational Evolutions of Sterically-Congested Dihydrophenazines via Crystallization

To gain a deeper understanding of the sequential multistep excited-state structural evolutions of N,N'-diphenyl-dihydrodibenzo[a,c]phenazine (DPAC) luminophores, we strategically freeze distinct conformations by crystallization, allowing to capture the progressive conformational transformations within a DPAC-based framework by utilizing single-crystal X-ray diffractometry. Our focus lies in the innovative modification of DPAC via the synthesis of cyano (CN)-substituted derivatives DPAC-nCN (n=1-4, with n indicating the number of CN groups). The incorporation of electron-withdrawing CN groups modulates electron delocalization and lowers energy barriers, facilitating access to conformational polymorphism within the crystals. Unlike the limited diversity observed in the crystallization behaviour of DPAC, the DPAC-2CN to DPAC-4CN derivatives exhibit distinct crystalline forms, with conformational diversity increasing in tandem with the number of CN substituents. Notably, the single DPAC-4CN molecule features multi-colored crystals transitioning from blue to red, with the folding angle of the polycyclic dihydrodibenzo[a,c]phenazine ring progressive varying from ~130° to ~172°. Additionally, DPAC-4CN's red crystals with high-energy planar conformation (~172°) can experience a sudden jumping when subjected to stimuli. This study not only advances the understanding of conformational dynamics in dihydrophenazines but also paves a new way for the development of dynamic crystal materials.

4D Assembly of Time-dependent Lanthanide Supramolecular Multicolor Phosphorescence for Encryption and Visual Sensing

Supramolecular dynamic room temperature phosphorescence (RTP) is the focus of current research because of its wide application in biological imaging and information anti-counterfeiting. Herein, a time-dependent supramolecular lanthanide phosphorescent 4D assembly material with multicolor luminescence including white, which is composed of 4-(4-bromophenyl)-pyridine salt derivative (G), inorganic clay (LP)/Eu complex and pyridine dicarboxylic acid (DPA) is reported. Compared with the self-assembled nanoparticle G, the lamellar assembly G/LP showed the double emission of fluorescence at 380 nm and phosphorescence at 516 nm over time. Within 60 min, the phosphorescence lifetime and the quantum yield increases from none to 7.4 ms and 27.53% respectively, achieving the time-dependent phosphorescence emission, due to the limitation of progressive stacking of LP electrostatically driven "domino effect." Furthermore, the 4D assembly of DPA and G/LP/Eu leads to a time-resolved multicolor emission from colorless to purple to white, which is successfully applied to information multi-level logic anti-counterfeiting and efficiently antibiotic selective sensor.

An Energy-Tunable Dual Emission Mechanism of the Hybridized Local and Charge Transfer (HLCT) and the Excited State Conjugation Enhancement (ESCE)

Molecular design of dual-fluorescent probes requires precise adjustment of the energy levels of two excited states and the energy barrier between them. While the hybridized local and charge-transfer (HLCT) state has been recently focused as an important excited state for high emission efficiency with a tunable energy level, a dual emission involving the HLCT state has been only achieved with the excited-state intramolecular proton transfer (ESIPT) system. Here, a series of dual-fluorescent molecules involving an HLCT excited state with the excited-state conjugation enhancement (ESCE) motif is presented as the first case. The energy level of the HLCT state has been adjusted by changing substituents and solvents, separately from the ESCE energy level. The HLCT-ESCE molecular design with tunable fluorescence properties proposes a new strategy for the development of advanced fluorescent probes.

Supramolecular Coassembly Activated Dual-Excitation Fluorescent Sensing Platform for Precise Detection of Aflatoxin B1

The development of a sensory signal amplification approach is very crucial for rapid and precise detection of aflatoxin B1 (AFB1). However, such approaches remain scarce due to the weak interactions between AFB1 and the sensing probes. Herein, the first example of a dual-excitation fluorescent platform for antibody-free AFB1 detection is reported, which is assembled by an ordered π-π stack of cationic perylene derivative (PTHA) and tris(2,2'-bipyridine)ruthenium(II) [Ru(bpy3)2+]. Taking advantage of stepwise assembly and multiple binding sites of the nanoprobe, its ability for capturing AFB1 is significantly improved driven by multiple noncovalent interactions. Interestingly, dual-excitation fluorescent sensing mode with signal superposition and self-calibration is activated in the supramolecular coassembly process. Under excitation of 365 nm and 440 nm, the platform exhibits specific recognition toward AFB1 and the limit of detection is determined to be 0.12 ng mL-1. Notably, the dual-excitation platform demonstrates exceptional sensitivity enhancements of 106-fold, revealing that the self-calibrated reference improves the sensitivity and accuracy of analytical method significantly. The applications of our platform not only crack the problem of precise AFB1 detection via supramolecular coassembly strategy but also provide a universal sensitization strategy for ultrasensitive analysis in complex environments.

Single-Molecule Localization Microscopy and Tracking with a Fluorescent Mechanosensitive Probe

A milestone in optical imaging of mechanical forces in cells has been the development of the family of flipper fluorescent probes able to report membrane tension noninvasively in living cells through their fluorescence lifetime. The specifically designed Flipper-CF3 probe with an engineered inherent blinking mechanism was recently introduced for super-resolution fluorescence microscopy of lipid ordered membranes but was too dim to be detected in lipid disordered membranes at the single-molecule level (García-Calvo, J. J. Am. Chem. Soc. 2020, 142(28), 12034-12038). We show here that the original and commercially available probe Flipper-TR is compatible with single-molecule based super-resolution imaging and resolves both liquid ordered and liquid disordered membranes of giant unilamellar vesicles below the diffraction limit. Single probe molecules were additionally tracked in lipid bilayers, enabling to distinguish membranes of varying composition from the diffusion coefficient of the probe. Differences in brightness between Flipper-CF3 and Flipper-TR originate in their steady-state absorption and fluorescence properties. The general compatibility of the Flipper-TR scaffold with single-molecule detection is further shown in super-resolution experiments with targetable Flipper-TR derivatives.

Design and Application of Fluorescent Probes to Detect Cellular Physical Microenvironments

The microenvironment is indispensable for functionality of various biomacromolecules, subcellular compartments, living cells, and organisms. In particular, physical properties within the biological microenvironment could exert profound effects on both the cellular physiology and pathology, with parameters including the polarity, viscosity, pH, and other relevant factors. There is a significant demand to directly visualize and quantitatively measure the fluctuation in the cellular microenvironment with spatiotemporal resolution. To satisfy this need, analytical methods based on fluorescence probes offer great opportunities due to the facile, sensitive, and dynamic detection that these molecules could enable in varying biological settings from in vitro samples to live animal models. Herein, we focus on various types of small molecule fluorescent probes for the detection and measurement of physical parameters of the microenvironment, including pH, polarity, viscosity, mechanical force, temperature, and electron potential. For each parameter, we primarily describe the chemical mechanisms underlying how physical properties are correlated with changes of various fluorescent signals. This review provides both an overview and a perspective for the development of small molecule fluorescent probes to visualize the dynamic changes in the cellular environment, to expand the knowledge for biological process, and to enrich diagnostic tools for human diseases.

Dual Ratio and Ultraprecision Quantification of Mitochondrial Viscosity in Ferroptosis Enabled by a Vibration-Based Triple-Emission Fluorescent Probe

Ferroptosis is a new mode of cell death with major morphological changes in mitochondria, including structural shrinkage and increased membrane density, indicating the mitochondrial abnormality during this process. Viscosity, as one of the crucial microenvironmental parameters for characterizing the mitochondrial state, is thought to be highly involved in the ferroptosis. Herein, we present a single fluorescent probe (PPAC-C4) for the dual ratio and ultrahigh-accuracy quantification of mitochondrial viscosity. This probe is constructed by linking a mitochondria-targeting cation fragment on a vibration-based fluorescent scaffold whose fluorescence exhibits the rare triple emission (480, 533, and 628 nm) depending on the viscosity. The intensity ratios of 480 nm/628 nm and 533 nm/628 nm can be used to monitor the viscosity changes in a double self-calibration manner and finally afford an average viscosity value with improved precision. By virtue of this pattern, we reveal that the mitochondrial viscosity will increase from 43.58 to 152.05 cP in A549 cells during the ferroptosis. This dual-ratio probe with triemission not only shows great potential in the study of ferroptosis and ferroptosis-related diseases but also proposes a new concept for ultraprecision quantitative analysis.

Dynamic monitoring of self-assembly by confining conformational changes of butterfly-motion-based molecules

A simple dynamic monitoring strategy for chiral self-assembly is achieved by confining the bent-to-planar evolution observed in N,N'-diphenyl-dihydrodibenzo[a,c]phenazine derivatives (DPAC-R/S-GLD). Besides, this approach provides a facile pathway to fabricate architectures with circularly polarized luminescence (CPL) properties.

Modulating the Luminescence, Photosensitizing Properties, and Mitochondria-Targeting Ability of D-π-A-Structured Dihydrodibenzo[a,c]phenazines

Herein, pyridinium and 4-vinylpyridinium groups are introduced into the VIE-active N,N'-disubstituted-dihydrodibenzo[a,c]phenazines (DPAC) framework to afford a series of D-π-A-structured dihydrodibenzo[a,c]phenazines in consideration of the aggregation-benefited performance of the DPAC module and the potential mitochondria-targeting capability of the resultant pyridinium-decorated DPACs (DPAC-PyPF6 and DPAC-D-PyPF6). To modulate the properties and elucidate the structure-property relationship, the corresponding pyridinyl/4-vinylpyridinyl-substituted DPACs, i.e., DPAC-Py and DPAC-D-Py, are designed and studied as controls. It is found that the strong intramolecular charge transfer (ICT) effect enables the effective separation of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of DPAC-PyPF6 and DPAC-D-PyPF6, which is conducive to the generation of ROS. By adjusting the electron-accepting group and the π-bridge, the excitation, absorption, luminescence, photosensitizing properties as well as the mitochondria-targeting ability can be finely tuned. Both DPAC-PyPF6 and DPAC-D-PyPF6 display large Stokes shifts (70-222 nm), solvent-dependent absorptions and emissions, aggregation-induced emission (AIE), red fluorescence in the aggregated state (λem = 600-650 nm), aggregation-promoted photosensitizing ability with the relative singlet-oxygen quantum yields higher than 1.10, and a mitochondria-targeting ability with the Pearson coefficients larger than 0.85. DPAC-D-PyPF6 shows absorption maximum at a longer wavelength, slightly redder fluorescence and better photosensitivity as compared to DPAC-PyPF6, which consequently leads to the higher photocytotoxicity under the irradiation of white light as a result of the larger π-conjugation.

Photodissociative Modules that Control Dual-Emission Properties in Donor-π-Acceptor Organoborane Fluorophores

Donor-π-acceptor fluorophores that consist of an electron-donating amino group and an electron-accepting triarylborane moiety generally exhibit substantial solvatochromism in their fluorescence while retaining high fluorescence quantum yields even in polar media. Herein, we report a new family of this compound class, which bears ortho-P(=X)R2 -substituted phenyl groups (X=O or S) as a photodissociative module. The P=X moiety that intramolecularly coordinates to the boron atom undergoes dissociation in the excited state, giving rise to dual emission from the corresponding tetra- and tricoordinate boron species. The susceptibility of the systems to photodissociation depends on the coordination ability of the P=O and P=S moieties, whereby the latter facilitates dissociation. The intensity ratios of the dual emission bands are sensitive to environmental parameters, including temperature, solution polarity, and the viscosity of the medium. Moreover, precise tuning of the P(=X)R2 group and the electron-donating amino moiety led to single-molecule white emission in solution.

Phenotyping of Methicillin-Resistant Staphylococcus aureus Using a Ratiometric Sensor Array

Chemical tools capable of classifying multidrug-resistant bacteria (superbugs) can facilitate early-stage disease diagnosis and help guide precision therapy. Here, we report a sensor array that permits the facile phenotyping of methicillin-resistant Staphylococcus aureus (MRSA), a clinically common superbug. The array consists of a panel of eight separate ratiometric fluorescent probes that provide characteristic vibration-induced emission (VIE) profiles. These probes bear a pair of quaternary ammonium salts in different substitution positions around a known VIEgen core. The differences in the substituents result in varying interactions with the negatively charged cell walls of bacteria. This, in turn, dictates the molecular conformation of the probes and affects their blue-to-red fluorescence intensity ratios (ratiometric changes). Within the sensor array, the differences in the ratiometric changes for the probes result in "fingerprints" for MRSA of different genotypes. This allows them to be identified using principal component analysis (PCA) without the need for cell lysis and nucleic acid isolation. The results obtained with the present sensor array agree well with those obtained using polymerase chain reaction (PCR) analysis.

Mechanoluminescent-Triboelectric Bimodal Sensors for Self-Powered Sensing and Intelligent Control

Self-powered flexible devices with skin-like multiple sensing ability have attracted great attentions due to their broad applications in the Internet of Things (IoT). Various methods have been proposed to enhance mechano-optic or electric performance of the flexible devices; however, it remains challenging to realize the display and accurate recognition of motion trajectories for intelligent control. Here, we present a fully self-powered mechanoluminescent-triboelectric bimodal sensor based on micro-nanostructured mechanoluminescent elastomer, which can patterned-display the force trajectories. The deformable liquid metals used as stretchable electrode make the stress transfer stable through overall device to achieve outstanding mechanoluminescence (with a gray value of 107 under a stimulus force as low as 0.3 N and more than 2000 cycles reproducibility). Moreover, a microstructured surface is constructed which endows the resulted composite with significantly improved triboelectric performances (voltage increases from 8 to 24 V). Based on the excellent bimodal sensing performances and durability of the obtained composite, a highly reliable intelligent control system by machine learning has been developed for controlling trolley, providing an approach for advanced visual interaction devices and smart wearable electronics in the future IoT era.

Solid-state emitting twisted π-conjugate as AIE-active DSE-gen: in vitro anticancer properties against FaDu and 4T1 with biocompatibility and bioimaging

Dual-state emissive fluorogens (DSE-gens) are currently defining their importance as a transpiring tool in biological and biomedical applications. This work focuses on designing and synthesizing indole-anthracene-based solid-state emitting twisted π-conjugates using a metal-free protocol to achieve AIE-active DSE-gens, expanding their scope in biological applications. Special effort has been made to introduce proficient and photo/thermostable DSE-gens that inhibit cancer but not normal cells. Here, the lead DSE-gen initially detects cancer and normal cells by bioimaging; however, it could also confirm and distinguish cancer cells from normal cells by its abated fluorescence signal after killing cancer cells. In contrast, the fluorescence signals for a normal cell remain unscathed. Surprisingly, these molecules displayed decent anticancer properties against FaDu and 4T1 but not MCF-7 cell lines. From a series of newly designed indole-based molecules, we report one single 2,3,4-trimethoxybenzene-linked DSE-gen (the lead), exhibiting high ROS generation, less haemolysis, and less cytotoxicity than doxorubicin (DOX) for normal cells, crucial parameters for a biocompatible in vitro anticancer probe. Thus, we present a potentially applicable anticancer drug, offering a bioactive material with bioimaging efficacy and a way to detect dead cancer cells selectively. The primary mechanism behind the identified outcomes is deciphered with the support of experimental (steady-state and time-resolved fluorescence, biological assays, cellular uptake) and molecular docking studies.

Dynamic Timing Control of Molecular Photoluminescent Systems

Dynamic control of molecular photoluminescence offers chemical solutions to designing functional emissive materials. Although stimuli-switchable molecular luminescent systems are well established, how to encode these dynamic emissive systems with a "timing" feature, that is, time-dependent luminescent properties, remains challenging. This Concept aims to summarize the design principles of dynamic timing molecular photoluminescent systems by discussing the state-of-the-art of this topic and the shaping of fabrication strategies at both the molecular and supramolecular levels. An outlook and perspectives are given to outline the future opportunities and challenges in the rational design and potential applications of these smart emissive systems.

Ratiometric Flapping Force Probe That Works in Polymer Gels

Polymer gels have recently attracted attention for their application in flexible devices, where mechanically robust gels are required. While there are many strategies to produce tough gels by suppressing nanoscale stress concentration on specific polymer chains, it is still challenging to directly verify the toughening mechanism at the molecular level. To solve this problem, the use of the flapping molecular force probe (FLAP) is promising because it can evaluate the nanoscale forces transmitted in the polymer chain network by ratiometric analysis of a stress-dependent dual fluorescence. A flexible conformational change of FLAP enables real-time and reversible responses to the nanoscale forces at the low force threshold, which is suitable for quantifying the percentage of the stressed polymer chains before structural damage. However, the previously reported FLAP only showed a negligible response in solvated environments because undesirable spontaneous planarization occurs in the excited state, even without mechanical force. Here, we have developed a new ratiometric force probe that functions in common organogels. Replacement of the anthraceneimide units in the flapping wings with pyreneimide units largely suppresses the excited-state planarization, leading to the force probe function under wet conditions. The FLAP-doped polyurethane organogel reversibly shows a dual-fluorescence response under sub-MPa compression. Moreover, the structurally modified FLAP is also advantageous in the wide dynamic range of its fluorescence response in solvent-free elastomers, enabling clearer ratiometric fluorescence imaging of the molecular-level stress concentration during crack growth in a stretched polyurethane film.

HydroFlipper membrane tension probes: imaging membrane hydration and mechanical compression simultaneously in living cells

HydroFlippers are introduced as the first fluorescent membrane tension probes that report simultaneously on membrane compression and hydration. The probe design is centered around a sensing cycle that couples the mechanical planarization of twisted push–pull fluorophores with the dynamic covalent hydration of their exocyclic acceptor. In FLIM images of living cells, tension-induced deplanarization is reported as a decrease in fluorescence lifetime of the dehydrated mechanophore. Membrane hydration is reported as the ratio of the photon counts associated to the hydrated and dehydrated mechanophores in reconvoluted lifetime frequency histograms. Trends for tension-induced decompression and hydration of cellular membranes of interest (MOIs) covering plasma membrane, lysosomes, mitochondria, ER, and Golgi are found not to be the same. Tension-induced changes in mechanical compression are rather independent of the nature of the MOI, while the responsiveness to changes in hydration are highly dependent on the intrinsic order of the MOI. These results confirm the mechanical planarization of push–pull probes in the ground state as most robust mechanism to routinely image membrane tension in living cells, while the availability of simultaneous information on membrane hydration will open new perspectives in mechanobiology.

HydroFlippers respond to membrane compression and hydration in the same fluorescence lifetime imaging microscopy histogram: the responses do not correlate.

A Lipidated Peptide with Mitochondrial Membrane Localization in Human A549 Lung Cells: From Enhanced Cell-Penetrating Properties to Biological Activity Mechanism

Here, a lipidated peptide Pal-pHK-pKV with self-assembly properties and the ability to provoke the disruption of the mitochondrial voltage-dependent anion channel-1 protein (VDAC1)-hexokinase-II (HK-II) complex is reported. The effects of the peptide pHK (N-terminal 15-amino acid fragment of HK-II that specifically binds VDAC1) are compared to those of a designed biomimetic amphiphilic pHK-pKV conjugate (pHK coupled with a cell-penetrating peptide pKV) and Pal-pHK-pKV (a lipidated conjugate modified with a hydrophobic palmitic (Pal) alkyl chain). The Pal-pHK-pKV exhibits a stronger interaction with the membrane as compared to pHK-pKV, which is demonstrated by the Langmuir-Blodgett technique and two-photon excitation microscopy. The amphiphilic peptide derivatives are cytotoxic to the A549 cells, but Pal-pHK-pKV is more cytotoxic. The inhibitory effects of the pHK derivatives on the A549 cells growth are investigated through induced apoptosis pathway, depolarized mitochondrial membrane potential, inhibited glycolysis, and activated caspase. The results of the immunofluorescence evidence the specific mitochondrial targeting by those derivatives.

Density-Dependent Emission Colors from a Conformation-Switching Chromophore in Polyurethanes

Achieving full-color emission from a single chromophore is not only highly desirable from practical considerations, but also greatly challenging for fundamental research. Herein, we demonstrated the density-dependent emission colors from a single boron-containing chromophore, from which multi-color fluorescent polyurethanes were prepared as well. Originating from its switchable molecular conformations, the emission color of the chromophore was found to be governed by the packing density and strongly influenced by hydrogen bonding interactions. The chromophore was incorporated into polyurethanes to achieve full-color emitting materials; the emission color was only dependent on the chromophore density and could be tuned via synthetic approach by controlling the compositions. The emission colors could also be modulated by physical approaches, including by swelling/deswelling process, compression under high pressure, and even blending the fluorescent polyurethane with non-emitting ones.

Emerging Solvatochromic Push-Pull Dyes for Monitoring the Lipid Order of Biomembranes in Live Cells

Solvatochromic dyes have emerged as a new class of fluorescent probes in the field of lipid membranes due to their ability to identify the lipid organization of biomembranes in live cells by changing the color of their fluorescence. This type of solvatochromic function is useful for studying the heterogeneous features of biomembranes caused by the uneven distribution of lipids and cholesterols in live cells and related cellular processes. Therefore, a variety of advanced solvatochromic dyes have been rapidly developed over the last decade. To provide an overview of the works recently developed solvatochromic dyes have enabled, we herein present some solvatochromic dyes, with a particular focus on those based on pyrene and Nile red. As these dyes exhibit preferable photophysical properties in terms of fluorescence microscopy applications and unique distribution/localization in cellular compartments, some have already found applications in cell biological and biophysical studies. The goal of this review is to provide information to researchers who have never used solvatochromic dyes or who have not discovered applications of such dyes in biological studies.

From Molecules to Polymers-Harnessing Inter- and Intramolecular Interactions to Create Mechanochromic Materials

The development of mechanophores as building blocks that serve as predefined weak linkages has enabled the creation of mechanoresponsive and mechanochromic polymer materials, which are interesting for a range of applications including the study of biological specimens or advanced security features. In typical mechanophores, covalent bonds are broken when polymers that contain these chemical motifs are exposed to mechanical forces, and changes of the optical properties upon bond scission can be harnessed as a signal that enables the detection of applied mechanical stresses and strains. Similar chromic effects upon mechanical deformation of polymers can also be achieved without relying on the scission of covalent bonds. The dissociation of motifs that feature directional noncovalent interactions, the disruption of aggregated molecules, and conformational changes in molecules or polymers constitute an attractive element for the design of mechanoresponsive and mechanochromic materials. In this article, it is reviewed how such alterations of molecules and polymers can be exploited for the development of mechanochromic materials that signal deformation without breaking covalent bonds. Recent illustrative examples are highlighted that showcase how the use of such mechanoresponsive motifs enables the visual mapping of stresses and damage in a reversible and highly sensitive manner.

Flapping Peryleneimide as a Fluorogenic Dye with High Photostability and Strong Visible-Light Absorption

Flapping fluorophores (FLAP) with a flexible 8π ring are rapidly gaining attention as a versatile photofunctional system. Here we report a highly photostable "flapping peryleneimide" with an unprecedented fluorogenic mechanism based on a bent-to-planar conformational change in the S₁ excited state. The S₁ planarization induces an electronic configurational switch, almost quenching the inherent fluorescence (FL) of the peryleneimide moieties. However, the FL quantum yield is remarkably improved with a prolonged lifetime upon a slight environmental change. This fluorogenic function is realized by sensitive π-conjugation design, as a more π-expanded analogue does not show the planarization dynamics. With strong visible-light absorption, the FL lifetime response synchronized with the flexible flapping motion is useful for the latest optical techniques such as FL lifetime imaging microscopy (FLIM).

HaloFlippers: A General Tool for the Fluorescence Imaging of Precisely Localized Membrane Tension Changes in Living Cells

Tools to image membrane tension in response to mechanical stimuli are badly needed in mechanobiology. We have recently introduced mechanosensitive flipper probes to report quantitatively global membrane tension changes in fluorescence lifetime imaging microscopy (FLIM) images of living cells. However, to address specific questions on physical forces in biology, the probes need to be localized precisely in the membrane of interest (MOI). Herein we present a general strategy to image the tension of the MOI by tagging our newly introduced HaloFlippers to self-labeling HaloTags fused to proteins in this membrane. The critical challenge in the construction of operational HaloFlippers is the tether linking the flipper and the HaloTag: It must be neither too taut nor too loose, be hydrophilic but lipophilic enough to passively diffuse across membranes to reach the HaloTags, and allow partitioning of flippers into the MOI after the reaction. HaloFlippers with the best tether show localized and selective fluorescence after reacting with HaloTags that are close enough to the MOI but remain nonemissive if the MOI cannot be reached. Their fluorescence lifetime in FLIM images varies depending on the nature of the MOI and responds to myriocin-mediated sphingomyelin depletion as well as to osmotic stress. The response to changes in such precisely localized membrane tension follows the validated principles, thus confirming intact mechanosensitivity. Examples covered include HaloTags in the Golgi apparatus, peroxisomes, endolysosomes, and the ER, all thus becoming accessible to the selective fluorescence imaging of membrane tension.

Dual Emission: Classes, Mechanisms, and Conditions

There has been much interest in dual-emission materials in the past few years for materials and life science applications; however, a systematic overview of the underlying processes is so-far missing. We resolve this issue herein by classifying dual-emission (DE) phenomena as relying on one emitter with two emitting states (DE1), two independent emitters (DE2), or two correlated emitters (DE3). Relevant DE mechanisms for materials science are then briefly described together with the electronic and/or geometrical conditions under which they occur. For further reading, references are given that offer detailed insight into the complex mechanistic aspects of the various DE processes or provide overviews on materials families or their applications. By avoiding ambiguities and misinterpretations, this systematic, insightful Review might inspire future targeted designs of DE materials.

The endeavor of vibration-induced emission (VIE) for dynamic emissions

Organic chromophores with large Stokes shifts and dual emissions are fascinating because of their fundamental and applied interest. Vibration-induced emission (VIE) refers to a tunable multiple fluorescence exhibited by saddle-shaped N,N'-disubstituted-dihydribenzo[a,c]phenazines (DHPs), which involves photo-induced configuration vibrations from bent to planar form along the N-N axis. VIE-active molecules show intrinsic long-wavelength emissions in the unconstrained state (planar state) but bright short-wavelength emissions in the constrained state (bent state). The emission response for VIE-active luminogens is highly sensitive to steric hindrance encountered during the planarization process such that a tiny structural variation can induce an evident change in fluorescence. This can often be achieved by tuning the intensity ratio of short- and long-wavelength bands. In some special cases, the alterations in the emission wavelength of VIE fluorophores can be achieved step by step by harnessing the degree of bending angle motion in the excited state. In this perspective, we summarize the latest progress in the field of VIE research. New bent heterocyclic structures, as novel types of VIE molecules, are being developed, and the general features of the chemical structures are also being proposed. Technologically, novel emission color-tuning approaches and VIE-based probes for visualizing biological activity are presented to demonstrate how the dynamic VIE effect can be exploited for cutting-edge applications.

A molecular-logic gate for COX-2 and NAT based on conformational and structural changes: visualizing the progression of liver disease

Lighting up the relevant lesion boundaries during operations is vital for guiding the effective resection of hepatopathic tissue.

Lighting up the relevant lesion boundaries during operations is vital for guiding the effective resection of hepatopathic tissue. We envisioned that molecular-logic gates, which are known for their excellent digital correlation between input and output signals, could be used to facilitate differential visualization of lesion boundaries. Herein, a series of flexible molecules, naphthalene imide-indole derivatives (IAN) were prepared and evaluated as molecular-logic gates. The input and output signals of the IAN derivatives were successfully used to highlight different hepatopathic regions in order to facilitate boundary differentiation. The IAN derivatives produce different signals due to collaborative changes in the conformation and structure. The hepatopathy-related enzymes (COX-2 and NAT) were used to induce conformational and structural changes in IAN derivatives. Based on these enzyme induced synergistic effects, IAN can sensitively emit different coloured signals such as green, cyan and blue (output signals) as a function of the different input signals, i.e. the different activity of COX-2 and NAT in solution and living cells. Significantly, the IAN derivatives were successfully used to distinguish the boundaries of hepatopathic lesions in tissues after spraying with IAN derivatives (mild cirrhosis, severe cirrhosis, in addition to early and late hepatocellular carcinoma) under a hand held lamp at 365 nm by naked eye.

Supramolecular Assembly-Driven Color-Tuning and White-Light Emission Based on Crown-Ether-Functionalized Dihydrophenazine

The development of color-tunable white-light-emitting systems is significant for artificial smart materials. Recently, a set of conformational dependent fluorophores N,N'-diaryl-dihydrodibenzo[a,c]phenazines (DPACs) have been developed with unique photoluminescence mechanism vibration-induced emission (VIE). DPACs can emit intrinsical blue emission at a bent excited state and abnormal orange-red emission at a planar excited state, which are due to the varied π-conjugation via excited-state configuration transformation along the N-N' axis from bent to planar form. Herein, a novel VIE-active compound DPAC-[B15C5]₂ is designed and synthesized with two wings of benzo-15-crown-5. The excited-state vibration of the DPAC moiety can be modulated by tuning the supramolecular assembly and disassembly via chelation competition of K⁺ between 15-crown-5 and 18-crown-6, and hence, a wide-color-tuning emission is achieved from blue to orange-red including white. Dynamic light scattering and transmission electron microscopy experiments were conducted to exhibit the supramolecular assembling process. Additionally, the moisture detection in organic solvents is realized since the water could dissociate the supramolecular assembly.

Modular synthesis of (C-10 to C-13)-substituted-9,14-diaryl-9,14-dihydrodibenzo[a,c]phenazines via a subsequent Buchwald-Hartwig amination and C-H amination strategy

Herein, we report a modular synthetic approach of (C-10 to C-13)-substituted 9,14-diaryl-9,14-dihydrodibenzo[a,c]phenazine derivatives. This synthetic route enables the aromatic substitution in a predictable and programmed manner to obtain products in synthetically useful isolated yield.

Internal standard fluorogenic probe based on vibration-induced emission for visualizing PTP1B in living cells

Herein, as a proof of concept, we developed the first enzymatic VIE fluorogenic probe for protein tyrosine phosphatase 1B (PTP1B).

Mono-Heteroatom Substitution for Harnessing Excited-State Structural Planarization of Dihydrodibenzo[a,c]phenazines

With the aim of generalizing the structure-properties relationship of bending heterocyclic molecules that undergo prominent photoinduced structural planarization (PISP), a series of new dihydrodibenzo[ac]phenazine derivatives in which one nitrogen atom is replaced by oxygen (PNO), sulfur (PNS), selenium (PNSe), or dimethylmethanediyl (PNC) was strategically designed and synthesized. Compounds PNO, PNS, and PNSe have significantly nonplanar geometries in the ground state, which undergo PISP to give a planarlike conformer and hence a large emission Stokes shift. A combination of femtosecond early relaxation dynamics and computational approaches established an R*→I* (intermediate)→P* sequential kinetic pattern for PNS and PNSe, whereas PNO undergoes R*→P* one-step kinetics. The polarization ability of the substituted heteroatoms, which is in the order O<S<Se, correlates with their increase in π conjugation, and hence the Stokes shift of the emission is in the order PNO<PNS<PNSe. Compound PNSe with the largest PISP barrier was shown to be a highly sensitive viscosity probe. Further evidence for heteroatom-harnessing PISP is given by PNC, in which the dimethylmethanediyl substituent lacks lone pair electrons for π extension, showing the normal emission of the bent structure. The results led to the conclusion that PISP is ubiquitous in dihydrodibenzo[ac]phenazines, for which the driving force is elongation of the π delocalization to gain stabilization in the excited state.

Solvatochromic Near-Infrared Probe for Polarity Mapping of Biomembranes and Lipid Droplets in Cells under Stress

Can polarity-sensitive fluorescent dyes monitor the response of live cells to fundamental stress conditions, such as deprivation from nutrition and oxidative stress? To address this question, we developed a push-pull dioxaborine probe (DXB-NIR) for biomembranes and lipid droplets featuring strong solvatochromism in the far-red to near-infrared region, high fluorescence brightness, photostability, and two-photon absorption cross section, reaching 13800 GM at 930 nm. In model membranes, DXB-NIR exhibits unprecedented 80 nm shift between liquid ordered and disordered membrane phases, allowing robust imaging of separated membrane microdomains. Two-color imaging of live cells with DXB-NIR enables polarity mapping in plasma membranes, endoplasmic reticulum, and lipid droplets, which reveals that starvation and oxidative stress produce an increase in the local polarity, and this change is different for each of the studied cell compartments. Thus, by pushing the limits of existing solvatochromic dyes, we introduce a concept of polarity mapping for monitoring the response of cells to stress.