N-Heterocyclic Carbene Iron(III) Porphyrin-Catalyzed Intramolecular C(sp3 )-H Amination of Alkyl Azides

Iron-Catalyzed Denitrogenative Annulation Reactions between α-Azido Acetamides and Cyclic Ketones

We report an FeCl2-catalyzed annulation reaction between α-azido acetamides and cyclic ketones. Two types of α,β-unsaturated γ-lactam products can be obtained, depending on the reaction conditions. When α-azido acetamides were reacted with cyclohexanone, 8-amino-5,6,7,8-tetrahydro-1H-indol-2(4H)-ones were obtained when a primary amine was present in the reaction system; conducting the reaction in the presence of 2-aminobenzenesulfonic acid, on the contrary, resulted in the formation of 5,6-dihydro-1H-indol-2(4H)-ones. Cycloheptanone and cyclooctanone reacted in the same way as cyclohexanone. The reactions proceed via the intermediacy of 2-iminoacetamides, which are formed by FeCl2-facilitated dinitrogenation of α-azido acetamides. These reactions constitute a new strategy for expanding the synthetic dimensions of organic azides.

Deciphering Iron-Catalyzed C-H Amination with Organic Azides: N2 Cleavage from a Stable Organoazide Complex

Catalytic C-N bond formation by direct activation of C-H bonds offers wide synthetic potential. En route to C-H amination, complexes with organic azides are critical precursors towards the reactive nitrene intermediate. Despite their relevance, α-N coordinated organoazide complexes are scarce in general, and elusive with iron, although iron complexes are by far the most active catalysts for C-H amination with organoazides. Herein, we report the synthesis of a stable iron α-N coordinated organoazide complex from [Fe(N(SiMe3 )2 )2 ] and AdN3 (Ad=1-adamantyl) and its crystallographic, IR, NMR and zero-field 57 Fe Mössbauer spectroscopic characterization. These analyses revealed that the organoazide is in fast equilibrium between the free and coordinated state (Keq =62). Photo-crystallography experiments showed gradual dissociation of N2 , which imparted an Fe-N bond shortening and correspond to structural snapshots of the formation of an iron imido/nitrene complex. Reactivity of the organoazide complex in solution showed complete loss of N2 , and subsequent formation of a C-H aminated product via nitrene insertion into a C-H bond of the N(SiMe3 )2 ligand. Monitoring this reaction by 1 H NMR spectroscopy indicates the transient formation of the imido/nitrene intermediate, which was supported by Mössbauer spectroscopy in frozen solution.

The Recent Advances in Iron-Catalyzed C(sp3 )-H Functionalization

The use of iron as a core metal in catalysis has become a research topic of interest over the last few decades. The reasons are clear. Iron is the most abundant transition metal on Earth's crust and it is widely distributed across the world. It has been extracted and processed since the dawn of civilization. All these features render iron a noncontaminant, biocompatible, nontoxic, and inexpensive metal and therefore it constitutes the perfect candidate to replace noble metals (rhodium, palladium, platinum, iridium, etc.). Moreover, direct C-H functionalization is one of the most efficient strategies by which to introduce new functional groups into small organic molecules. The majority of organic compounds contain C(sp3 )-H bonds. Given the enormous importance of organic molecules in so many aspects of existence, the utilization and bioactivity of C(sp3 )-H bonds are of the utmost importance. This review sheds light on the substrate scope, selectivity, benefits, and limitations of iron catalysts for direct C(sp3 )-H bond activations. An overview of the use of iron catalysis in C(sp3 )-H activation protocols is summarized herein up to 2022.

Synthesis of Tertiary Fluorides through an Acid-Mediated Deoxyfluorination of Tertiary Alcohols

The combination of methanesulfonic acid and potassium bifluoride is reported for the deoxyfluorination of tertiary alcohols. Under metal-free conditions that use readily available, cheap, and easy-to-handle reagents, a range of tertiary alcohols could be converted into the corresponding fluorides in excellent yields (average yields of 85% for 23 examples). Mechanistic investigation showed that the reaction proceeds at 0 °C, in part, through an elimination/hydrofluorination pathway, but no residual alkenes are observed. The application of these conditions for the fluorination of ether and ester is also demonstrated.

Iron-Catalyzed Intermolecular C-H Amination Assisted by an Isolated Iron-Imido Radical Intermediate

Here we report the use of a base metal complex [(tBu pyrpyrr2 )Fe(OEt2 )] (1-OEt2 ) (tBu pyrpyrr2 2- =3,5-tBu2 -bis(pyrrolyl)pyridine) as a catalyst for intermolecular amination of Csp3 -H bonds of 9,10-dihydroanthracene (2 a) using 2,4,6-trimethyl phenyl azide (3 a) as the nitrene source. The reaction is complete within one hour at 80 °C using as low as 2 mol % 1-OEt2 with control in selectivity for single C-H amination versus double C-H amination. Catalytic C-H amination reactions can be extended to other substrates such as cyclohexadiene and xanthene derivatives and can tolerate a variety of aryl azides having methyl groups in both ortho positions. Under stoichiometric conditions the imido radical species [(tBu pyrpyrr2 )Fe{=N(2,6-Me2 -4-tBu-C6 H2 )] (1-imido) can be isolated in 56 % yield, and spectroscopic, magnetometric, and computational studies confirmed it to be an S = 1 FeIV complex. Complex 1-imido reacts with 2 a to produce the ferrous aniline adduct [(tBu pyrpyrr2 )Fe{NH(2,6-Me2 -4-tBu-C6 H2 )(C14 H11 )}] (1-aniline) in 45 % yield. Lastly, it was found that complexes 1-imido and 1-aniline are both competent intermediates in catalytic intermolecular C-H amination.

Ruthenium(v) terminal arylimido corroles: isolation, spectroscopic characterization and reactivity

Terminal Ru(v)-imido species are thought to be as reactive to group transfer reactions as their Ru(v)-oxo homologues, but are less studied. With the electron-rich corrole ligand, relatively stable and isolable Ru(v)-arylimido complexes [Ru(tBu-Cor)(NAr)] (H3(tBu-Cor) = 5,15-diphenyl-10-(p-tert-butylphenyl)corrole, Ar = 2,4,6-Me3C6H2 (Mes), 2,6-(iPr)2C6H3 (Dipp), 2,4,6-(iPr)3C6H2 (Tipp), and 3,5-(CF3)2C6H3 (BTF)) can be prepared from [Ru(tBu-Cor)]2 under strongly reducing conditions. This type of Ru(v)-monoarylimido corrole complex with S = ½ was characterized by high-resolution ESI mass spectrometry, X-band EPR, resonance Raman spectroscopy, magnetic susceptibility, and elemental analysis, together with computational studies. Under heating/light irradiation (xenon lamp) conditions, the complexes [Ru(tBu-Cor)(NAr)] (Ar = Mes, BTF) could undergo aziridination of styrenes and amination of benzylic C(sp3)-H bonds with up to 90% product yields.

Iron-Catalyzed Intermolecular C-N Cross-Coupling Reactions via Radical Activation Mechanism

A concept for intermolecular C-N cross-coupling amination has been discovered using tetrazoles and aromatic and aliphatic azides with boronic acids under iron-catalyzed conditions. The amination follows an unprecedented metalloradical activation mechanism that is different from traditional metal-catalyzed C-N cross-coupling reactions. The scope of the reaction has been demonstrated by the employment of a large number of tetrazoles, azides, and boronic acids. Moreover, several late-stage aminations and a short synthesis of a drug candidate have been showcased for further synthetic utility. Collectively, this iron-catalyzed C-N cross-coupling should have wide applications in the context of medicinal chemistry, drug discovery, and pharmaceutical industries.

Discovery of a simple iron catalyst reveals the intimate steps of C-H amination to form C-N bonds

Formation of ubiquitous C-N bonds traditionally uses prefunctionalized carbon precursors. Recently, metal-catalyzed amination of unfunctionalized C-H bonds with azides has become an attractive and atom-economic strategy for C-N bond formation, though all catalysts contain sophisticated ligands. Here, we report Fe(HMDS)₂ (HMDS = N(SiMe₃)₂ ^-) as an easy-to-prepare catalyst for intramolecular C-H amination. The catalyst shows unprecedented turnover frequencies (110 h^-1 vs. 70 h^-1 reported to date) and requires no additives. Amination is successful for benzylic and aliphatic C-H bonds (>80% yield) and occurs even at room temperature. The simplicity of the catalyst enabled for the first time comprehensive mechanistic investigations. Kinetic, stoichiometric, and computational studies unveiled the intimate steps of the C-H amination process, including the resting state of the catalyst and turnover-limiting N₂ loss of the coordinated azide. The high reactivity of the iron imido intermediate is rationalized by its complex spin system revealing imidyl and nitrene character.

From the bottle: simple iron salts for the efficient synthesis of pyrrolidines via catalytic C-H bond amination

Commercially available iron salts FeX₂ are remarkably active catalysts for pyrrolidine formation from organic azides via direct C-H bond amination. With FeI₂, amination is fast and selective, (<30 min for 80% yield at 2 mol% loading), TONs up to 370 are reached with just 0.1 mol% catalyst, different functional groups are tolerated, and a variety of C-H bonds were activated.

Iron porphyrin-catalysed C(sp3)–H amination with alkyl azides for the synthesis of complex nitrogen-containing compounds

With the readily prepared iron porphyrin complex as a catalyst and starting with alkyl azides, a panel of nitrogen-containing skeletons representing the families of natural alkaloids and bioactive compounds could be prepared in good yields.

Iron-Catalyzed Intermolecular Amination of Benzylic C(sp3)-H Bonds

A catalytic system for intermolecular benzylic C(sp³)-H amination is developed utilizing 1,2,3,4-tetrazole as a nitrene precursor via iron catalysis. This method enables direct installation of 2-aminopyridine into the benzylic and heterobenzylic position. The method selectively aminates 2° benzylic C(sp³)-H bond over the 3° and 1° benzylic C(sp³)-H bonds. Experimental studies reveal that the C(sp³)-H amination undergoes via the formation of a benzylic radical intermediate. This study reports the discovery of new method for 2-pyridine substituted benzylamine synthesis using inexpensive, biocompatible base metal catalysis that should have wide application in the context of medicinal chemistry and drug discovery.

An iron(ii)-based metalloradical system for intramolecular amination of C(sp2)-H and C(sp3)-H bonds: synthetic applications and mechanistic studies

A catalytic system for intramolecular C(sp2)-H and C(sp3)-H amination of substituted tetrazolopyridines has been successfully developed. The amination reactions are developed using an iron-porphyrin based catalytic system. It has been demonstrated that the same iron-porphyrin based catalytic system efficiently activates both the C(sp2)-H and C(sp3)-H bonds of the tetrazole as well as azide-featuring substrates with a high level of regioselectivity. The method exhibited an excellent functional group tolerance. The method affords three different classes of high-value N-heterocyclic scaffolds. A number of important late-stage C-H aminations have been performed to access important classes of molecules. Detailed studies (experimental and computational) showed that both the C(sp2)-H and C(sp3)-H amination reactions involve a metalloradical activation mechanism, which is different from the previously reported electro-cyclization mechanism. Collectively, this study reports the discovery of a new class of metalloradical activation modes using a base metal catalyst that should find wide application in the context of medicinal chemistry, drug discovery and industrial applications.

Silver Catalyzed Site-Selective C(sp3)−H Bond Amination of Secondary over Primary C(sp3)−H Bonds

Sulfamates are widespread in numerous pharmacologically active molecules. In this paper, Silver/Bathophenanthroline catalyzed the intramolecular selective amination of primary C(sp³)−H bonds and secondary C(sp³)−H bonds of sulfamate esters, to produce cyclic sulfamates in good yields and with a high site-selectivity. DFT calculations revealed that the interaction between sulfamates and L10 makes the molecule more firmly attached to the catalyst, benefiting the catalysis reaction. The in vitro anticancer activity of the final products was evaluated in MCF-7 breast cancer cells.

Halogen-atom and group transfer reactivity enabled by hydrogen tunneling

The generation of carbon radicals by halogen-atom and group transfer reactions is generally achieved using tin and silicon reagents that maximize the interplay of enthalpic (thermodynamic) and polar (kinetic) effects. In this work, we demonstrate a distinct reactivity mode enabled by quantum mechanical tunneling that uses the cyclohexadiene derivative γ-terpinene as the abstractor under mild photochemical conditions. This protocol activates alkyl and aryl halides as well as several alcohol and thiol derivatives. Experimental and computational studies unveiled a noncanonical pathway whereby a cyclohexadienyl radical undergoes concerted aromatization and halogen-atom or group abstraction through the reactivity of an effective H atom. This activation mechanism is seemingly thermodynamically and kinetically unfavorable but is rendered feasible through quantum tunneling.

Access to β-Lactams via Iron-Catalyzed Olefin Oxyamidation Enabled by the π-Accepting Phthalocyanine Ligand

Herein, we report the development of an iron-catalyzed olefin oxyamidation by utilizing tethered dioxazolones as the nitrenoid precursor to produce valuable β-lactam scaffolds. Mechanistic studies revealed that a relatively strong π-accepting ability of the phthalocyanine ligand is critical in generating the key triplet iron-imidyl radical intermediate to enable the 4-exo-trig-lactamization with the incorporation of oxygen nucleophiles in high diastereoselectivity. This cyclization approach was readily extended to the highly efficient γ-lactam synthesis (TON > 300).

Organometallic 3d transition metal NHC complexes in oxidation catalysis

The development of processes for the selective oxidation of hydrocarbons is a major focus in catalysis research. Making this process simultaneously environmentally friendly is still challenging. 3d transition metals are...

A comparative study of Rh2-catalyzed intermolecular nitrene transfer reactions: mechanism and chemoselectivity

The intermolecular catalytic mechanisms using Rh2(esp)2 and Rh2(OAc)4 are analogous and their large difference in aziridination-to-amination chemoselectivity stems from the steric effect.

Perspectives on Ligand Properties of N-Heterocyclic Carbenes in Iron Porphyrin Complexes

There has been considerable research interest in the ligand nature of N-heterocyclic carbenes (NHCs). In this work, two six-coordinate NHC iron porphyrin complexes [Fe^II(TTP)(1,3-Me₂Imd)₂] (TTP = tetratolylporphyrin, 1,3-Me₂Imd = 1,3-dimethylimidazol-2-ylidene) and [Fe^III(TDCPP)(1,3-Me₂Imd)₂]ClO₄ (TDCPP = 5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrin) are reported. Single-crystal X-ray characterizations demonstrate that both complexes have strongly ruffled conformations and relatively perpendicular ligand orientations which are forced by the sterically bulky 1,3-Me₂Imd NHC ligands. Multitemperature (4.2-300 K) and high magnetic field (0-9 T) Mössbauer and low-temperature (4.0 K) EPR spectroscopies definitely confirmed the low-spin states of [Fe^II(TTP)(1,3-Me₂Imd)₂] (S = 0) and [Fe^III(TDCPP)(1,3-Me₂Imd)₂]ClO₄ (S = 1/2). The similarity of 1,3-Me₂Imd and imidazole, as well as the well-established correlations between the ligand nature and spectroscopic characteristics of [Fe^II,III(Porph)(L)₂]^0,+ (Porph: porphyrin; L: planar base ligand) species, allowed direct comparisons between the pair of ligands which revealed for the first time that NHC has a stronger π-acceptor ability than imidazoles, in addition to its very strong σ-donation.

An Iron-Mesoionic Carbene Complex for Catalytic Intramolecular C-H Amination Utilizing Organic Azides

The synthesis of N-heterocycles is of paramount importance for the pharmaceutical industry. They are often synthesized through atom economic and environmentally unfriendly methods, generating significant waste. A less explored, but greener, alternative is the synthesis through the direct intramolecular C-H amination utilizing organic azides. Few examples exist by using this method, but many are limited due to the required use of stoichiometric amounts of Boc₂O. Herein, we report a homoleptic C,O-chelating mesoionic carbene-iron complex, which is the first iron-based complex that does not require the addition of any protecting groups for this transformation and that is active also in strong donor solvents such as THF or even DMSO. The achieved turnover number is an order of magnitude higher than any other reported catalytic system. A variety of C-H bonds were activated, including benzylic, primary, secondary, and tertiary. By following the reaction over time, we determined the presence of an initiation period. Kinetic studies showed a first-order dependence on substrate concentration and half-order dependence on catalyst concentration. Intermolecular competition reactions with deuterated substrate showed no KIE, while separate reactions with deuterium-labeled substrate resulted in a KIE of 2.0. Moreover, utilizing deuterated substrate significantly decreased the initiation period of the catalysis. Preliminary mechanistic studies suggest a unique mechanism involving a dimeric iron species as the catalyst resting state.

Imbuing an Old Heterocycle with the Power of Modern Catalysis: An Isoxazolidin-5-one Story

Isoxazolidin-5-ones have been regarded as β-amino acid surrogates owing to their labile N-O bond. While many efforts have been devoted to the catalytic enantioselective synthesis of the core of this heterocycle, its further transformation has been less explored, especially in the context of catalysis. This review summarizes the author's research on the development of catalytic reactions using isoxazolidin-5-ones as substrates. Asymmetric catalysis has proven effective for C-C bond formation at the carbonyl α-carbon. Catalytic asymmetric allylation and direct Mannich-type reactions have been developed. Further, the resulting products have been readily converted into the corresponding quaternary β^2,2-amino acids. Moreover, isoxazolidin-5-ones have been identified as alkyl nitrene precursors in the presence of a suitable metal catalyst. The generated metallonitrene undergoes either the electrophilic amination of the aromatic ring or aliphatic C-H insertion, affording a series of cyclic β-amino acids. A remarkable difference in chemoselectivity between rhodium and copper alkyl nitrenes has also been demonstrated, highlighting the unique nature of the underexplored reactive intermediates. The various linear and cyclic β-amino acids obtained through the study are likely to find great utility in a broad range of chemical sciences.

Iron-Catalyzed 1,4-Phenyl Migration/Ring Expansion of α-Azido N-Phenyl Amides

Herein, we report a novel iron-catalyzed skeleton rearrangement of alkyl azides. Upon treatment with FeCl₂ and N-heterocyclic carbene SIPr·HCl in the presence of H₂O and Et₃N, 2-azido-N,N-diphenylamides underwent 1,4-phenyl migration and ring expansion to give azepin-2-ones in good yield. The reaction proceeds via intramolecular nitrene cycloaddition followed by C-N cleavage, water addition, and electrocyclic ring opening.

Ligand-Enabled, Copper-Catalyzed Electrophilic Amination for the Asymmetric Synthesis of β-Amino Acids

Catalytic asymmetric nitrene transfer has emerged as a reliable method for the synthesis of nitrogen-containing chiral compounds. Herein, we report the copper-catalyzed intramolecular asymmetric electrophilic amination of aromatic rings. The reactive intermediate is a copper-alkyl nitrene generated from isoxazolidin-5-ones. Copper catalysis promotes three classes of asymmetric transformations, namely, asymmetric desymmetrization, parallel kinetic resolution, and kinetic resolution, expanding the repertoire of alkyl nitrene transfer and providing various cyclic and linear β-amino acids in their enantioenriched forms.

Direct photo-induced reductive Heck cyclization of indoles for the efficient preparation of polycyclic indolinyl compounds

The photo-induced cleavage of C(sp2)-Cl bonds is an appealing synthetic tool in organic synthesis, but usually requires the use of high UV light, photocatalysts and/or photosensitizers. Herein is described a direct photo-induced chloroarene activation with UVA/blue LEDs that can be used in the reductive Heck cyclization of indoles and without the use of a photocatalyst or photosensitizer. The indole compounds examined display room-temperature phosphorescence. The photochemical reaction tolerates a panel of functional groups including esters, alcohols, amides, cyano and alkenes (27 examples, 50-88% yields), and can be used to prepare polycyclic compounds and perform the functionalization of natural product analogues in moderate to good yields. Mechanistic experiments, including time-resolved absorption spectroscopy, are supportive of photo-induced electron transfer between the indole substrate and DIPEA, with the formation of radical intermediates in the photo-induced dearomatization reaction.

A soluble iron(II)-phthalocyanine-catalyzed intramolecular C(sp3)-H amination with alkyl azides

Herein, we describe a soluble iron(II)-phthalocyanine, [Fe^II(^tBu₄Pc)(py)₂] (Pc = phthalocyaninato(2-)), as an effective catalyst in intramolecular C(sp³)-H bond amination, with alkyl azides as the nitrogen source, to afford the amination products in moderate to excellent yields with a broad substrate scope.

Asymmetric Synthesis of Enantiopure Pyrrolidines by C(sp3 )-H Amination of Hydrocarbons

The asymmetric synthesis of enantiopure pyrrolidines is reported via a streamlined strategy relying on two sequential C-H functionalizations of simple hydrocarbons. The first step is a regio- and stereoselective catalytic nitrene C-H insertion. Then, a subsequent diastereoselective cyclization involving a 1,5-hydrogen atom transfer (HAT) from a N-centered radical leads to the formation of pyrrolidines that can then be converted to their free NH-derivatives.

Controlling Radical-Type Single-Electron Elementary Steps in Catalysis with Redox-Active Ligands and Substrates

Advances in (spectroscopic) characterization of the unusual electronic structures of open-shell cobalt complexes bearing redox-active ligands, combined with detailed mapping of their reactivity, have uncovered several new catalytic radical-type protocols that make efficient use of the synergistic properties of redox-active ligands, redox-active substrates, and the metal to which they coordinate. In this perspective, we discuss the tools available to study, induce, and control catalytic radical-type reactions with redox-active ligands and/or substrates, contemplating recent developments in the field, including some noteworthy tools, methods, and reactions developed in our own group. The main topics covered are (i) tools to characterize redox-active ligands; (ii) novel synthetic applications of catalytic reactions that make use of redox-active carbene and nitrene substrates at open-shell cobalt-porphyrins; (iii) development of catalytic reactions that take advantage of purely ligand- and substrate-based redox processes, coupled to cobalt-centered spin-changing events in a synergistic manner; and (iv) utilization of redox-active ligands to influence the spin state of the metal. Redox-active ligands have emerged as useful tools to generate and control reactive metal-coordinated radicals, which give access to new synthetic methodologies and intricate (electronic) structures, some of which are yet to be exposed.

Interweaving Visible-Light and Iron Catalysis for Nitrene Formation and Transformation with Dioxazolones

Herein, visible-light-driven iron-catalyzed nitrene transfer reactions with dioxazolones for intermolecular C(sp³ )-N, N=S, and N=P bond formation are described. These reactions occur with exogenous-ligand-free process and feature satisfactory to excellent yields (up to 99 %), an ample substrate scope (109 examples) under mild reaction conditions. In contrast to intramolecular C-H amidations strategies, an intermolecular regioselective C-H amidation via visible-light-induced nitrene transfer reactions is devised. Mechanistic studies indicate that the reaction proceeds via a radical pathway. Computational studies show that the decarboxylation of dioxazolone depends on the conversion of ground sextet state dioxazolone-bounding iron species to quartet spin state via visible-light irradiation.

Computational insights into Ir(iii)-catalyzed allylic C-H amination of terminal alkenes: mechanism, regioselectivity, and catalytic activity

Computational studies on Ir(iii)-catalyzed intermolecular branch-selective allylic C–H amination of terminal olefins with methyl dioxazolone have been carried out to investigate the mechanism, including the origins of regioselectivity and catalytic activity difference. The result suggests that the reaction proceeds through generation of active species, alkene coordination, allylic C–H activation, decarboxylation, migratory insertion, and protodemetalation. The presence of AgNTf₂ could thermodynamically promote the formation of catalytically active species [Cp*Ir(OAc)]⁺. Both the weaker Ir–C(internal) bond and the closer interatomic distance of N⋯C(internal) in the key allyl-Ir(v)-nitrenoid intermediate make the migratory insertion into Ir–C(internal) bond easier than into the Ir–C(terminal) bond, leading to branch-selective allylic C–H amidation. The high energy barrier for allylic C–H activation in the Co system could account for the observed sluggishness, which is mainly ascribed to the weaker coordination capacity of alkenes to the triplet Cp*Co(OAc)⁺ and the deficient metal⋯H interaction to assist hydrogen transfer.

DFT studies on Ir(iii)-catalyzed branch-selective allylic C–H amination of terminal olefins with methyl dioxazolone have been carried out to investigate the mechanism, including the origins of regioselectivity and catalytic activity difference.

Generation and application of Cu-bound alkyl nitrenes for the catalyst-controlled synthesis of cyclic β-amino acids

The advent of saturated N-heterocycles as valuable building blocks in medicinal chemistry has led to the development of new methods to construct such nitrogen-containing cyclic frameworks. Despite the apparent strategic clarity, intramolecular C–H aminations with metallonitrenes have only sporadically been explored in this direction because of the intractability of the requisite alkyl nitrenes. Here, we report copper-catalysed intramolecular amination using an alkyl nitrene generated from substituted isoxazolidin-5-ones upon N–O bond cleavage. The copper catalysis exclusively aminates aromatic C(sp²)–H bonds among other potentially reactive groups, offering a solution to the chemoselectivity problem that has been troublesome with rhodium catalysis. A combined experimental and computational study suggested that the active species in the current cyclic β-amino acid synthesis is a dicopper alkyl nitrene, which follows a cyclisation pathway distinct from the analogous alkyl metallonitrene.

Copper-catalysed conditions have been developed for the chemoselective synthesis of cyclic β-amino acids.

Iron-Catalyzed Radical Activation Mechanism for Denitrogenative Rearrangement Over C(sp3 )-H Amination

An iron-catalyzed denitrogenative rearrangement of 1,2,3,4-tetrazole is developed over the competitive C(sp³ )-H amination. This catalytic rearrangement reaction follows an unprecedented metalloradical activation mechanism. Employing the developed method, a wide number of complex-N-heterocyclic product classes have been accessed. The synthetic utility of this radical activation method is showcased with the short synthesis of a bioactive molecule. Collectively, this discovery underlines the progress of radical activation strategy that should find wide application in the perspective of medicinal chemistry, drug discovery and natural product synthesis research.

Nitrene-mediated intermolecular N-N coupling for efficient synthesis of hydrazides

N-N linkages are found in many natural compounds and endow fascinating structural and functional properties. In comparison to the myriad methods for the construction of C-N bonds, chemistry for N-N coupling, especially in an intermolecular fashion, remains underdeveloped. Here, we report a nitrene-mediated intermolecular N-N coupling of dioxazolones and arylamines under iridium or iron catalysis. These reactions offer a simple and efficient method for the synthesis of various hydrazides from readily available carboxylic acid and amine precursors. Although the Ir-catalysed conditions usually give higher N-N coupling yield than the Fe-catalysed conditions, the reactions of sterically more demanding dioxazolones derived from α-substituted carboxylic acids work much better under the Fe-catalysed conditions. Mechanistic studies revealed that the nitrogen atom of Ir acyl nitrene intermediates has strong electrophilicity and can undergo nucleophilic attack with arylamines with the assistance of Cl···HN hydrogen bonding to form the N-N bond with high efficiency and chemoselectivity.

Efficient Amination of Activated and Non-Activated C(sp3 )-H Bonds with a Simple Iron-Phenanthroline Catalyst

A readily available catalyst consisting of iron dichloride in combination with 1,10-phenanthroline catalyzes the ring-closing C-H amination of N-benzoyloxyurea to form imidazolidin-2-ones in high yields. The C-H amination reaction is very general and applicable to benzylic, allylic, propargylic, and completely non-activated aliphatic C(sp3 )-H bonds, and it also works for C(sp2 )-H bonds. The surprisingly simple method can be performed under open flask conditions.

C-H Activation: Toward Sustainability and Applications

Since the definition of the "12 Principles of Green Chemistry" more than 20 years ago, chemists have become increasingly mindful of the need to conserve natural resources and protect the environment through the judicious choice of synthetic routes and materials. The direct activation and functionalization of C-H bonds, bypassing intermediate functional group installation is, in abstracto, step and atom economic, but numerous factors still hinder the sustainability of large-scale applications. In this Outlook, we highlight the research areas seeking to overcome the sustainability challenges of C-H activation: the pursuit of abundant metal catalysts, the avoidance of static directing groups, the replacement of metal oxidants, and the introduction of bioderived solvents. We close by examining the progress made in the subfield of aryl C-H borylation from its origins, through highly efficient but precious Ir-based systems, to emerging 3d metal catalysts. The future growth of this field will depend on industrial uptake, and thus we urge researchers to strive toward sustainable C-H activation.