Enabling Visible-Light-Driven Selective CO2 Reduction by Doping Quantum Dots: Trapping Electrons and Suppressing H2 Evolution

Coupling CdS quantum dots with polyoxometalate-supported [Re(CO)3]+ catalysts for efficient photocatalytic CO2 reduction

A coupled photocatalytic system has been constructed by integrating CdS quantum dots as a light-absorber and polyoxometalate-supported [Re(CO)3]+ (POM-Re) catalysts, which exhibited efficient activity towards photoreduction of CO2 to HCOOH. Mechanistic studies revealed that the favorable migration of photogenerated electrons endows Sb2W20Re2 with efficient photocatalytic CO2 reduction activity.

Correlating photochemical H2 production and excited state lifetimes of heterostructured and doped ZnCdS nanoparticles

A variety of ZnCdS-based semiconductor nanoparticle heterostructures with extended exciton lifetimes were synthesized to enhance the efficacy of photocatalytic hydrogen production in water. Specifically, doped nanoparticles (NPs), as well as core/shell NPs with and without palladium and platinum co-catalysts, were solubilized into water using various methods to assess their efficacy for solar H2 fuel synthesis. The best results were obtained with low bandgap ZnCdS cores and ZnCdS/ZnS core/shell NPs with palladium co-catalysts. The results, augmented with DFT and tight binding electronic structure calculations, revealed the importance of exciton charge carrier separation via tunneling. While the systems studied here were photocatalytically active, they nonetheless lagged behind the quantum efficiency observed from "gold standard" CdSe/CdS·Pt dot-in-rod nanoparticles as evident from quantum efficiencies that were estimated to be 0.5 → 2%.

Electrostatic Confinement-Induced Excited Charge Transfer in Ionic Covalent Organic Framework Promoting CO2 Reduction

We demonstrate an electrostatic confinement-induced charge transfer pathway in a supramolecular photocatalyst comprising of an ionic covalent organic framework (COF) and cationic metal complexes. The dynamic electrostatic interactions not only attract cations around the COF to accept photogenerated electrons, but also allow for a retention of homogeneous catalytic characters of complexes, making a subtle balance. Accordingly, the electrostatic confinement effect facilitates the forward electron transfer from a photoexcited COF to cationic Co complex, realizing a remarkable photocatalytic CO2 reduction performance. Its catalytic efficiency is far superior to the supramolecular counterparts with Van-der-Waals or hydrogen bonding interactions. This work presents an insight for enhancing charge transfer in supramolecular systems, and provides an effective approach for construction of highly efficient photocatalysts.

Long-lived carriers-promoted photocatalytic deuteration of halides with D2O as the deuterium source over Cu doped quantum dots

Deuterium labeling is a highly valuable yet challenging subject of research in various scientific fields. Conventional deuteration methods often involve harsh reaction conditions and suffer from limited reactivity and selectivity. Herein, we report a visible light-driven C-X (X = halogen) to C-D (D = deuterium) exchange strategy over copper-doped cadmium sulfide quantum dots (Cu-CdS QDs) under mild conditions, eliminating the need for noble metal catalysts and expensive deuterium sources. The conversion of aryl halides into deuterated products using Cu-CdS QDs reaches up to 99%, which is four times higher than that achieved using pristine CdS QDs. The substantial enhancement in the photocatalytic activity of the QDs can be primarily attributed to the generation of long-lived charge carriers (approximately 6 μs) induced by Cu doping. Mechanistic studies reveal that the Cu dopants considerably retard the recombination of photoinduced carriers by creating intermediate energy levels that serve as hole trapping centers in CdS QDs, thereby improving the electron utilization efficiency in energetically demanding photoreduction reactions. Additionally, the introduction of Cu increases the energy offset between the conduction band of CdS QDs and molecular acceptors, facilitating the electron transfer process. Upon visible light irradiation, a series of aryl halides can be efficiently converted into the desired deuterated compounds using D2O as the deuterium source. This work demonstrates that regulating charge carrier dynamics in ultrasmall QD-based photocatalysts is a promising strategy for promoting organic transformations.

Site-Specific for CO2 Photoreduction with Single-Atom Ni on Strained TiO2-x Derived from Bimetallic Metal-Organic Frameworks

The photocatalytic reduction of CO2 in water to produce fuels and chemicals is promising while challenging. However, many photocatalysts for accomplishing such challenging task usually suffer from unspecific catalytic active sites and the inefficient charge carrier's separation. Here, a site-specific single-atom Ni/TiO2-x catalyst is reported by in situ topological transformation of Ni-Ti-EG bimetallic metal-organic frameworks. The loading of nickel nanoparticles or individual atoms, which act as specific active sites, can be precisely regulated by chelating agents through the partial removal of nickel and adjacent oxygen atoms. Furthermore, the degree of lattice strain in Ni/TiO2-x catalysts, which improves the separation efficiency of charge carriers, can be modulated by fine-tuning the transformation process. By leveraging the anchored nickel atoms and the strained TiO2, the optimized NiSA0.27/TiO2-x shows a CO generation rate of 86.3 µmol g-1 h-1 (288 times higher than that of NiNPs/TiO2-x) and CO selectivity of up to 92.5% for CO2 reduction in a pure-water system. This work underscores the importance of tailoring lattice strain and creating specific single-atom active sites to facilitate the efficient and selective reduction of CO2.

Reinforcing Photogenerated Carrier Extraction of Environment-Friendly InP/ZnSeS Quantum Dots for High-Performing Photoelectrochemical Photodetection and Solar Energy Conversion

Colloidal InP/ZnSeS-based quantum dots (QDs) are considered promising building blocks for light-emitting devices due to their environmental friendliness, high quantum yield (QY), and narrow emission. However, the intrinsic type-I band structure severely hinders potential photoelectrochemical (PEC) applications requiring efficient photoexcited carrier separation and transfer. In this study, the optoelectronic properties of InP/ZnSeS QDs are tailored by introducing Al dopants in the ZnSeS layer, which concurrently passivate the surface defects and act as shallow donor states for suppressed non-radiative recombination and improved charge extraction efficiency. Consequently, as-fabricated InP/ZnSeS:Al QDs-based PEC-type photodetector exhibited a high detectivity up to 1011 Jones and a remarkable responsivity of 0.66 A W-1 at 600 nm even under self-powered condition (0V bias). In addition, as-prepared InP/ZnSeS:Al QDs-based photoanode can be alternatively used for PEC hydrogen generation, showing an H2 production rate of 73.7 µmol cm-2 h-1 under 1 sun illumination (AM 1.5G, 100 mW cm-2). The results offer a prospective strategy for optimizing eco-friendly QDs for high-performance multifunctional light detection/conversion devices.

Rationally Designed S-Scheme CeO2/g-C3N4 Heterojunction for Promoting Visible Light Driven CO2 Photoreduction into Syngas

Exploring low-cost visible light photocatalysts for CO2 reduction to produce proportionally adjustable syngas is of great significance for meeting the needs of green chemical industry. A S-Scheme CeO2/g-C3N4 (CeO2/CN) heterojunction was constructed by using a simple two-step calcination method. During the photocatalytic CO2 reduction process, the CeO2/CN heterojunction can present a superior photocatalytic performance, and the obtained CO/H2 ratios in syngas can be regulated from 1 : 0.16 to 1 : 3.02. In addition, the CO and H2 production rate of the optimal CeO2/CN composite can reach 1169.56 and 429.12 μmol g-1 h-1, respectively. This superior photocatalytic performance is attributed to the unique S-Scheme photogenerated charge transfer mechanism between CeO2 and CN, which facilitates rapid charge separation and migration, while retaining the excellent redox capacity of both semiconductors. Particularly, the variable valence Ce3+/Ce4+ can act as electron mediator between CeO2 and CN, which can promote electron transfer and improve the catalytic performance. This work is expected to provide a new useful reference for the rational construction of high efficiency S-Scheme heterojunction photocatalyst, and improve the efficiency of photocatalytic reduction of CO2, promoting the photocatalytic reduction of CO2 into useful fuels.

Emerging Opportunities of Colloidal Quantum Dots for Photocatalytic Organic Transformations

Colloidal quantum dots (QDs) have emerged as a versatile photocatalyst for a wide range of photocatalytic transformations owing to its high absorption coefficient, large surface-to-volume ratio, high stability, and efficient charge and energy transfer dynamics. The past decades have witnessed a rapid development of QDs for artificial photocatalysis. In this review, the unique characteristics of QDs are focused on, including quantum size effect, compositional and structural diversity, tunable surface chemistry, and photophysics, that can be utilized for photocatalytic transformations. The recent advancements in photocatalytic organic transformations enabled by QDs photocatalysts are summarized. The unique opportunities of QDs are highlighted to tackle organic reactions that are previously unattainable with small molecule photocatalysts. Lastly, an outlook is provided for future directions in this field.

Boosting Photocatalytic CO2 Methanation through Interface Fusion over CdS Quantum Dot Aerogels

In the field of photocatalytic CO2 reduction, quantum dot (QD) assemblies have emerged as promising candidate photocatalysts due to their superior light absorption and better substrate adsorption. However, the poor contacts within QD assemblies lead to low interfacial charge transfer efficiency, making QD assemblies suffer from unsatisfactory photocatalytic performance. Herein, a novel approach is presented involving the construction of strongly interfacial fused CdS QD assemblies (CdS QD gel) for CO2 reduction. The novel CdS QD gel demonstrates outstanding photocatalytic performance for CO2 methanation, achieving a CH4 generation rate of ≈296 µmol g-1 h-1, with a selectivity surpassing 76% and an apparent quantum yield (AQY) of 1.4%. Further investigations reveal that the robust interfacial fusion in these CdS QDs not only boosts their ability to absorb visible light but also significantly promotes charge separation. The present work paves the way for utilizing QD gel photocatalysts in realizing efficient CO2 reduction and highlights the critical role of interfacial engineering in photocatalysts.

Passivating Defects and Constructing Catalytic Sites on CsPbBr3 with ZnBr2 for Photocatalytic CO2 Reduction

In recent years, halide perovskites have attracted considerable attention for photocatalytic CO2 reduction. However, the presence of surface defects and the lack of specific catalytic sites for CO2 reduction lead to low photocatalytic performance. In this study, we demonstrate a facile method that post-treats CsPbBr3 with ZnBr2 for photocatalytic CO2 reduction. Our experimental and characterization results show that ZnBr2 has a dual role: the Br- ions in ZnBr2 passivate Br vacancies (VBr) on the CsPbBr3 surface, while Zn2+ cations act as catalytic sites for CO2 reduction. The ZnBr2-CsPbBr3 achieves a photocatalytic CO evolution rate of 57 μmol g-1 h-1, which is nearly three times higher than that of the pristine CsPbBr3. The enhanced performance over ZnBr2-CsPbBr3 is mainly due to the decreased VBr and lower reaction energy barrier for CO2 reduction. This work presents an effective method to simultaneously passivate surface defects and introduce catalytic sites, providing useful guidance for the regulation of perovskite photoelectric properties and the design of efficient photocatalysts.

Titanium carbide sealed cadmium sulfide quantum dots on carbon, oxygen-doped boron nitride for enhanced and durable photochemical carbon dioxide reduction

Despite great efforts that have been made, photocatalytic carbon dioxide (CO2) reduction still faces enormous challenges due to the sluggish kinetics or disadvantageous thermodynamics. Herein, cadmium sulfide quantum dots (CdS QDs) were loaded onto carbon, oxygen-doped boron nitride (BN) and encapsulated by titanium carbide (Ti3C2, MXene) layers to construct a ternary composite. The uniform distribution of CdS QDs and the tight interfacial interaction among the three components could be achieved by adjusting the loading amounts of CdS QDs and MXene. The ternary 100MX/CQ/BN sample gave a productive rate of 2.45 and 0.44 μmol g-1 h-1 for carbon monoxide (CO) and methane (CH4), respectively. This CO yield is 1.93 and 6.13 times higher than that of CdS QDs/BN and BN counterparts. The photocatalytic durability of the ternary composite is significantly improved compared with CdS QDs/BN because MXene can protect CdS from photocorrosion. The characterization results demonstrate that the excellent CO2 adsorption and activation capabilities of BN, the visible light absorption of CdS QDs, the good conductivity of MXene and the well-matched energy band alignment jointly promote the photocatalytic performance of the ternary catalyst.

Aggregation-Enabled Electrochemistry in Confined Nanopore Capable of Complementary Faradaic and Non-Faradaic Detection

Electrochemistry that empowers innovative nanoscopic analysis has long been pursued. Here, the concept of aggregation-enabled electrochemistry (AEE) in a confined nanopore is proposed and devised by reactive oxygen species (ROS)-responsive aggregation of CdS quantum dots (QDs) within a functional nanopipette. Complementary Faradaic and non-Faradaic operations of the CdS QDs aggregate could be conducted to simultaneously induce the signal-on of the photocurrents and the signal-off of the ionic signals. Such a rationale permits the cross-checking of the mutually corroborated signals and thus delivers more reliable results for single-cell ROS analysis. Combined with the rich biomatter-light interplay, the concept of AEE can be extended to other stimuli-responsive aggregations for electrochemical innovations.

Electronic Structure Design of Transition Metal-Based Catalysts for Electrochemical Carbon Dioxide Reduction

With the increasingly serious greenhouse effect, the electrochemical carbon dioxide reduction reaction (CO2RR) has garnered widespread attention as it is capable of leveraging renewable energy to convert CO2 into value-added chemicals and fuels. However, the performance of CO2RR can hardly meet expectations because of the diverse intermediates and complicated reaction processes, necessitating the exploitation of highly efficient catalysts. In recent years, with advanced characterization technologies and theoretical simulations, the exploration of catalytic mechanisms has gradually deepened into the electronic structure of catalysts and their interactions with intermediates, which serve as a bridge to facilitate the deeper comprehension of structure-performance relationships. Transition metal-based catalysts (TMCs), extensively applied in electrochemical CO2RR, demonstrate substantial potential for further electronic structure modulation, given their abundance of d electrons. Herein, we discuss the representative feasible strategies to modulate the electronic structure of catalysts, including doping, vacancy, alloying, heterostructure, strain, and phase engineering. These approaches profoundly alter the inherent properties of TMCs and their interaction with intermediates, thereby greatly affecting the reaction rate and pathway of CO2RR. It is believed that the rational electronic structure design and modulation can fundamentally provide viable directions and strategies for the development of advanced catalysts toward efficient electrochemical conversion of CO2 and many other small molecules.

Enhanced Charge Carrier Dynamics on Sb2 Se3 Photocathodes for Efficient Photoelectrochemical Nitrate Reduction to Ammonia

Ammonia (NH3 ) is recognized as a transportable carrier for renewable energy fuels. Photoelectrochemical nitrate reduction reaction (PEC NO3 RR) offers a sustainable solution for nitrate-rich wastewater treatment by directly converting solar energy to ammonia. In this study, we demonstrate the highly selective PEC ammonia production from NO3 RR by constructing a CoCu/TiO2 /Sb2 Se3 photocathode. The constructed CoCu/TiO2 /Sb2 Se3 photocathode achieves an ammonia Faraday efficiency (FE) of 88.01 % at -0.2 VRHE and an ammonia yield as high as 15.91 μmol h-1  cm-2 at -0.3 VRHE with an excellent onset potential of 0.43 VRHE . Dynamics experiments and theoretical calculations have demonstrated that the CoCu/TiO2 /Sb2 Se3 photocathode possesses high light absorption capacity, excellent carrier transfer capability, and high charge separation and transfer efficiencies. The photocathode can effectively adsorb the reactant NO3 - and intermediate, and the CoCu co-catalyst increases the maximum Gibbs free energy difference between NO3 RR and HER. Meanwhile, the Co species enhances the spin density of Cu, and increases the density of states near the Fermi level in pdos, which results in a high PEC NO3 RR activity on CoCu/TiO2 /Sb2 Se3 . This work provides a new avenue for the feasibility of efficient PEC ammonia synthesis from nitrate-rich wastewater.

Bi-ligand-fabricated CdS quantum dots to photo-induce aqueous-phase aldol condensation for biomass-derived carbonyl compounds

CdS QDs were fabricated using bi-ligands 11-sulfanylundecanoic acid and proline for photo-induced aqueous-phase aldol condensation of biomass-derived furfural compounds and ketones, and they displayed acceptable selectivity, activity and recycling properties for generation of a wide range of products with diverse applications. This work facilitates understanding the molecular-level design concepts of semiconductor photocatalysts.

Engineering 0D/2D Architecture of Ni(OH)2 Nanoparticles on Covalent Organic Framework Nanosheets for Selective Visible-Light-Driven CO2 Reduction

Low-dimensional materials serving as photocatalysts favor providing abundant unsaturated active sites and shortening the charge transport distance, but the high surface energy readily causes the aggregation that limits their application. Herein, it is demonstrated that 2D covalent organic framework (COF) TpBD nanosheets are effective in the dispersion and stabilization of 0D Ni(OH)2 . The COF precursor TpBD is synthesized from the Schiff base condensation of 1,3,5-triformylphloroglucinol (Tp) and benzidine (BD) and exfoliated into 2D nanosheets named BDNs via ultrasonication. The formation of highly dispersive 0D Ni(OH)2 on BDNs is reached under a mild weak basic condition, enabling robust active sites for CO2 adsorption/activation and rapid interface cascaded electron transport channels for the accumulation of long-lived photo-generated charges. The champion catalyst 30%Ni-BDNs effectively catalyze the CO2 to CO conversion under visible-light irradiation, offering a high CO evolution rate of 158.4 mmol g-1 h-1 and turnover frequency of 51 h-1 . By contrast, the counterpart photocatalyst, the bulk TpBD stabilized Ni(OH)2 , affords a much lower CO evolution rate and selectivity. This work demonstrates a new avenue to simultaneously construct efficient active sites and electron transport channels by coupling 0D metal hydroxides and 2D COF nanosheets for CO2 photoreduction.

Generating Long-Lived Charge Carriers in CdS Quantum Dots by Cu-Doping for Photocatalytic CO2 Reduction

Converting CO2 into high-value-added chemicals has been recognized as a promising way to tackle the fossil fuel crisis. Quantum dots (QDs) have been extensively studied for photocatalytic CO2 reduction due to their excellent optoelectronic properties. However, most of the photogenerated charge carriers recombine before they participate in the photocatalytic reaction. It is crucial to regulate the charge carriers to minimize undesired charge recombination, thus, promoting surface photocatalysis. Herein, we report a copper-doped CdS (Cu:CdS) QD photocatalyst for CO2 reduction. Density functional theory simulations and experimental results demonstrate that Cu dopants create intermediate energy levels in CdS QDs that can extend the lifetime of exciton charge carriers. Furthermore, the long-lived charge carriers can be harnessed for the photocatalytic reaction on Cu:CdS QDs. The resultant Cu:CdS QDs exhibited a significantly enhanced photocatalytic activity toward CO2 reduction compared to the pristine CdS QDs. This work highlights the importance of charge regulation in photocatalysts and opens new pathways for the exploration of efficient QD photocatalysts.

Regulating the Active Sites of Cs2 AgBiCl6 by Doping for Efficient Coupling of Photocatalytic CO2 Reduction and Benzyl Alcohol Oxidation

Halide perovskites exhibit outstanding optoelectronic properties, which make them an ideal choice for photocatalytic CO2 reduction and benzyl alcohol (BA) oxidation. Nevertheless, the simultaneous realization of the above redox coupling reactions on halide perovskites remains a great challenge, as it requires distinct catalytic sites for different target reactions. Herein, the catalytic sites of Cs2 AgBiCl6 (CABC) are regulated by doping Fe for efficient coupling of photocatalytic CO2 reduction and BA oxidation. The Fe-doped CABC (Fe: CABC) exhibits an enhanced visible-light response and effective charge separation. Experimental results and theoretical calculations reveal a synergistic interplay between Bi and Fe sites, where the Bi and Fe sites have lower activation energies toward CO2 reduction and BA oxidation. Further investigations demonstrate that electrons and holes prefer to accumulate at the Bi site and Fe site under light irradiation, respectively, which creates favorable conditions for facilitating CO2 reduction and BA oxidation. The resultant Fe: CABC achieves a high photocatalytic performance toward CO (18.5 µmol g-1  h-1 ) and BD (1.1 mmol g-1  h-1 ) generation, which surpasses most of the state-of-the-art halide photocatalysts. This work demonstrates a facile strategy for regulating the catalytic site for redox coupling reactions, which will pave a new way for designing halide perovskites for photocatalysis.

Pressure-Modulated Interface Engineering toward Realizing Core@Shell Configuration Transition

The strained interface of core@shell nanocrystals (NCs) can effectively modulate the energy level alignment, thereby significantly affecting the optical properties. Herein, the unique photoluminescence (PL) response of doped Mn ions is introduced as a robust probe to detect the targeted pressure-strain relation of CdS@ZnS NCs. Results show that the core experiences actually less pressure than the applied external pressure, attributed to the pressure-induced optimized interface that reduces the compressive strain on core. The pressure difference between core and shell increases the conduction band and valence band offsets and further achieves the core@shell configuration transition from quasi type II to type I. Accordingly, the PL intensity of CdS@ZnS NCs slightly increases, along with a faster blue-shift rate of PL peak under low pressure. This study elucidates the interplay between external physical pressure and interfacial chemical stress for core@shell NCs, leading to precise construction of interface engineering for practical applications.

Amorphization-Induced Cation Exchange in Indium Oxide Nanosheets for CO2-to-Ethanol Conversion

Cation exchange (CE) in metal oxides under mild conditions remains an imperative yet challenging goal to tailor their composition and enable practical applications. Herein, we first develop an amorphization-induced strategy to achieve room-temperature CE for universally synthesizing single-atom doped In2O3 nanosheets (NSs). Density functional theory (DFT) calculations elucidate that the abundant coordination-unsaturated sites present in a-In2O3 NSs are instrumental in surmounting the energy barriers of CE reactions. Empirically, a-In2O3 NSs as the host materials successfully undergo exchange with unary cations (Cu2+, Co2+, Mn2+, Ni2+), binary cations (Co2+Mn2+, Co2+Ni2+, Mn2+Ni2+), and ternary cations (Co2+Mn2+Ni2+). Impressively, high-loading single-atom doped (over 10 atom %) In2O3 NSs were obtained. Additionally, Cu/a-In2O3 NSs exhibit an excellent ethanol yield (798.7 μmol g-1 h-1) with a high selectivity of 99.5% for the CO2 photoreduction. This work offers a new approach to induce CE reactions in metal oxides under mild conditions and constructs scalable single-atom doped catalysts for critical applications.

Artificial photosynthetic cells with biotic-abiotic hybrid energy modules for customized CO2 conversion

Programmable artificial photosynthetic cell is the ultimate goal for mimicking natural photosynthesis, offering tunable product selectivity via reductase selection toward device integration. However, this concept is limited by the capacity of regenerating the multiple cofactors that hold the key to various reductases. Here, we report the design of artificial photosynthetic cells using biotic-abiotic thylakoid-CdTe as hybrid energy modules. The rational integration of thylakoid with CdTe quantum dots substantially enhances the regeneration of bioactive NADPH, NADH and ATP cofactors without external supplements by promoting proton-coupled electron transfer. Particularly, this approach turns thylakoid highly active for NADH regeneration, providing a more versatile platform for programming artificial photosynthetic cells. Such artificial photosynthetic cells can be programmed by coupling with diverse reductases, such as formate dehydrogenase and remodeled nitrogenase for highly selective production of formate or methane, respectively. This work opens an avenue for customizing artificial photosynthetic cells toward multifarious demands for CO2 conversion.

Breaking K+ Concentration Limit on Cu Nanoneedles for Acidic Electrocatalytic CO2 Reduction to Multi-Carbon Products

Electrocatalytic CO2 reduction reaction (CO2 RR) to multi-carbon products (C2+ ) in acidic electrolyte is one of the most advanced routes for tackling our current climate and energy crisis. However, the competing hydrogen evolution reaction (HER) and the poor selectivity towards the valuable C2+ products are the major obstacles for the upscaling of these technologies. High local potassium ions (K+ ) concentration at the cathode's surface can inhibit proton-diffusion and accelerate the desirable carbon-carbon (C-C) coupling process. However, the solubility limit of potassium salts in bulk solution constrains the maximum achievable K+ concentration at the reaction sites and thus the overall acidic CO2 RR performance of most electrocatalysts. In this work, we demonstrate that Cu nanoneedles induce ultrahigh local K+ concentrations (4.22 M) - thus breaking the K+ solubility limit (3.5 M) - which enables a highly efficient CO2 RR in 3 M KCl at pH=1. As a result, a Faradaic efficiency of 90.69±2.15 % for C2+ (FEC2+ ) can be achieved at 1400 mA.cm-2 , simultaneous with a single pass carbon efficiency (SPCE) of 25.49±0.82 % at a CO2 flow rate of 7 sccm.

Efficient and Direct Functionalization of Allylic sp3 C-H Bonds with Concomitant CO2 Reduction

Solar-driven CO2 reduction integrated with C-C/C-X bond-forming organic synthesis represents a substantially untapped opportunity to simultaneously tackle carbon neutrality and create an atom-/redox-economical chemical synthesis. Herein, we demonstrate the first cooperative photoredox catalysis of efficient and tunable CO2 reduction to syngas, paired with direct alkylation/arylation of unactivated allylic sp3 C-H bonds for accessing allylic C-C products, over SiO2 -supported single Ni atoms-decorated CdS quantum dots (QDs). Our protocol not only bypasses additional oxidant/reductant and pre-functionalization of organic substrates, affording a broad of allylic C-C products with moderate to excellent yields, but also produces syngas with tunable CO/H2 ratios (1 : 2-5 : 1). Such win-win coupling catalysis highlights the high atom-, step- and redox-economy, and good durability, illuminating the tantalizing possibility of a renewable sunlight-driven chemical feedstocks manufacturing industry.

In Situ Constructed Perovskite-Chalcogenide Heterojunction for Photocatalytic CO2 Reduction

Perovskite nanocrystals (PNCs) are promising candidates for solar-to-fuel conversions yet exhibit low photocatalytic activities mainly due to serious recombination of photogenerated charge carriers. Constructing heterojunction is regarded as an effective method to promote the separation of charge carriers in PNCs. However, the low interfacial quality and non-directional charge transfer in heterojunction lead to low charge transfer efficiency. Herein, a CsPbBr3 -CdZnS heterojunction is designed and prepared via an in situ hot-injection method for photocatalytic CO2 reduction. It is found that the high-quality interface in heterojunction and anisotropic charge transfer of CdZnS nanorods (NRs) enable efficient spatial separation of charge carriers in CsPbBr3 -CdZnS heterojunction. The CsPbBr3 -CdZnS heterojunction achieves a higher CO yield (55.8 µmol g-1  h-1 ) than that of the pristine CsPbBr3 NCs (13.9 µmol g-1  h-1 ). Furthermore, spectroscopic experiments and density functional theory (DFT) simulations further confirm that the suppressed recombination of charge carriers and lowered energy barrier for CO2 reduction contribute to the improved photocatalytic activity of the CsPbBr3 -CdZnS heterojunction. This work demonstrates a valid method to construct high-quality heterojunction with directional charge transfer for photocatalytic CO2 reduction. This study is expected to pave a new avenue to design perovskite-chalcogenide heterojunction.

Photoactive p-Type Spinel CuGa2O4 Nanocrystals

Herein we report the synthesis and characterization of spinel copper gallate (CuGa₂O₄) nanocrystals (NCs) with an average size of 3.7 nm via a heat-up colloidal reaction. CuGa₂O₄ NCs have a band gap of ∼2.5 eV and marked p-type character, in agreement with ab initio simulations. These novel NCs are demonstrated to be photoactive, generating a clear and reproducible photocurrent under blue light irradiation when deposited as thin films. Crucially, the ability to adjust the Cu/Ga ratio within the NCs, and the effect of this on the optical and electronic properties of the NCs, was also demonstrated. These results position CuGa₂O₄ NCs as a novel material for optoelectronic applications, including hole transport and light harvesting.

Heterostructure-Engineered Semiconductor Quantum Dots toward Photocatalyzed-Redox Cooperative Coupling Reaction

Semiconductor quantum dots have been emerging as one of the most ideal materials for artificial photosynthesis. Here, we report the assembled ZnS-CdS hybrid heterostructure for efficient coupling cooperative redox catalysis toward the oxidation of 1-phenylethanol to acetophenone/2,3-diphenyl-2,3-butanediol (pinacol) integrated with the reduction of protons to H2. The strong interaction and typical type-I band-position alignment between CdS quantum dots and ZnS quantum dots result in efficient separation and transfer of electron-hole pairs, thus distinctly enhancing the coupled photocatalyzed-redox activity and stability. The optimal ZnS-CdS hybrid also delivers a superior performance for various aromatic alcohol coupling photoredox reaction, and the ratio of electrons and holes consumed in such redox reaction is close to 1.0, indicating a high atom economy of cooperative coupling catalysis. In addition, by recycling the scattered light in the near field of a SiO2 sphere, the SiO2-supported ZnS-CdS (denoted as ZnS-CdS/SiO2) catalyst can further achieve a 3.5-fold higher yield than ZnS-CdS hybrid. Mechanistic research clarifies that the oxidation of 1-phenylethanol proceeds through the pivotal radical intermediates of •C(CH3)(OH)Ph. This work is expected to promote the rational design of semiconductor quantum dots-based heterostructured catalysts for coupling photoredox catalysis in organic synthesis and clean fuels production.

The Photocatalytic Conversion of Carbon Dioxide to Fuels Using Titanium Dioxide Nanosheets/Graphene Oxide Heterostructure as Photocatalyst

Carbon dioxide (CO₂) photoreduction to high-value products is a technique for dealing with CO₂ emissions. The method involves the molecular transformation of CO₂ to hydrocarbon and alcohol-type chemicals, such as methane and methanol, relying on a photocatalyst, such as titanium dioxide (TiO₂). In this research, TiO₂ nanosheets (TNS) were synthesized using a hydrothermal technique in the presence of a hydrofluoric acid (HF) soft template. The nanosheets were further composited with graphene oxide and doped with copper oxide in the hydrothermal process to create the copper-TiO₂ nanosheets/graphene oxide (CTNSG). The CTNSG exhibited outstanding photoactivity in converting CO₂ gas to methane and acetone. The production rate for methane and acetone was 12.09 and 0.75 µmol h^-1 g_cat^-1 at 100% relative humidity, providing a total carbon consumption of 71.70 µmol g_cat^-1. The photoactivity of CTNSG was attributed to the heterostructure interior of the two two-dimensional nanostructures, the copper-TiO₂ nanosheets and graphene oxide. The nanosheets-graphene oxide interfaces served as the n-p heterojunctions in holding active radicals for subsequent reactions. The heterostructure also directed the charge transfer, which promoted electron-hole separation in the photocatalyst.

Surface passivation of intensely luminescent all-inorganic nanocrystals and their direct optical patterning

All-inorganic nanocrystals (NCs) are of great importance in a range of electronic devices. However, current all-inorganic NCs suffer from limitations in their optical properties, such as low fluorescence efficiencies. Here, we develop a general surface treatment strategy to obtain intensely luminescent all-inorganic NCs (ILANs) by using designed metal salts with noncoordinating anions that play a dual role in the surface treatment process: (i) removing the original organic ligands and (ii) binding to unpassivated Lewis basic sites to preserve the photoluminescent (PL) properties of the NCs. The absolute photoluminescence quantum yields (PLQYs) of red-emitting CdSe/ZnS NCs, green-emitting CdSe/CdZnSeS/ZnS NCs and blue-emitting CdZnS/ZnS NCs in polar solvents are 97%, 80% and 72%, respectively. Further study reveals that the passivated Lewis basic sites of ILANs by metal cations boost the efficiency of radiative recombination of electron-hole pairs. While the passivation of Lewis basic sites leads to a high PLQY of ILANs, the exposed Lewis acidic sites provide the possibility for in situ tuning of the functions of NCs, creating opportunities for direct optical patterning of functional NCs with high resolution.

Integrating electronic structure regulation and dynamic active sites construction on NixCd1-xS-Ni0 photocatalyst for efficient hydrogen evolution

Regulating electronic structure and enriching active sites of photocatalysts are effective strategies to promote hydrogen evolution. Herein, a unique NixCd1-xS-Ni0 photocatalyst, including the surface nickel (Ni) doping and atomic Ni0 anchoring sites, is successfully prepared by Ni2+ ions exchange reaction (Ni2++ CdS → NixCd1-xS) and in-situ photo-induction of Ni0(Ni2++NixCd1-xS→hνNixCd1-xS-Ni0), respectively. As to Ni doping, the Ni replaced cadmium (Cd) atoms introduce hybridized states around the Fermi level, modulating the electronic structure of adjacent S atoms and optimizing the photocatalytic activity of sulfur (S) atoms. Besides, photogenerated Ni0 atoms, anchored on unsaturated S atoms, act as charge transfer bridges to reduce Ni2+ ions in the solution to Ni clusters (NixCd1-xS-Ni0→ne-NixCd1-xS-Ni). Subsequently, the displacement reaction of Ni clusters with protons (H+) spontaneously proceeds to produce hydrogen (H2) in an acidic solution (NixCd1-xS-Ni→2H+H2↑+Ni2++NixCd1-xS-Ni0). The equilibrium of photo-deposition/dissolution of Ni clusters realizes the construction of dynamic active sites, providing sustainable reaction centers and enhancing surface redox kinetics. The NixCd1-xS-Ni0 exhibits a high hydrogen evolution rate of 428 mmol·h-1·g-1 with a quantum efficiency of 75.6 % at 420 nm. This work provides the optimal S electronic structure for photocatalytic H2 evolution and constructs dynamic Ni clusters for chemical replacement reaction. This work provides the optimal S electronic structure for photocatalytic H2 evolution and constructs dynamic Ni clusters for displacement reaction, opening a dual pathway for efficient water reduction.

Solar-driven methanogenesis with ultrahigh selectivity by turning down H2 production at biotic-abiotic interface

Integration of methanogens with semiconductors is an effective approach to sustainable solar-driven methanogenesis. However, the H₂ production rate by semiconductors largely exceeds that of methanogen metabolism, resulting in abundant H₂ as side product. Here, we report that binary metallic active sites (namely, NiCu alloys) are incorporated into the interface between CdS semiconductors and Methanosarcina barkeri. The self-assembled Methanosarcina barkeri-NiCu@CdS exhibits nearly 100% CH₄ selectivity with a quantum yield of 12.41 ± 0.16% under light illumination, which not only exceeds the reported biotic-abiotic hybrid systems but also is superior to most photocatalytic systems. Further investigation reveal that the Ni-Cu-Cu hollow sites in NiCu alloys can directly supply hydrogen atoms and electrons through photocatalysis to the Methanosarcina barkeri for methanogenesis via both extracellular and intracellular hydrogen cycles, effectively turning down the H₂ production. This work provides important insights into the biotic-abiotic hybrid interface, and offers an avenue for engineering the methanogenesis process.

Encapsulated CdSe/CdS nanorods in double-shelled porous nanocomposites for efficient photocatalytic CO2 reduction

Colloidal quantum dots have been emerging as promising photocatalysts to convert CO₂ into fuels by using solar energy. However, the above photocatalysts usually suffer from low CO₂ adsorption capacity because of their nonporous structures, which principally reduces their catalytic efficiency. Here, we show that synchronizing imine polycondensation reaction to self-assembly of colloidal CdSe/CdS nanorods can produce micro-meso hierarchically porous nanocomposites with double-shelled nanocomposites. Owing to their hierarchical pores and the ability to separate photoexcited electrons, the self-assembled porous nanocomposites exhibit remarkably higher activity (≈ 64.6 μmol g⁻¹ h⁻¹) toward CO₂ to CO in solid-gas regime than that of nonporous solids from self-assembled CdSe/CdS nanorods under identical conditions. Importantly, the length of the nanorods is demonstrated to be crucial to correlate their ability to long-distance separation of photogenerated electrons and holes along their axial direction. Overall, this approach provides a rational strategy to optimize the CO₂ adsorption and conversion by integrating the inorganic and organic semiconductors.

The authors design double shelled hollow superstructures from self-assembled CdSe/CdS nanorods in covalent organic frameworks for CO2 photo-reduction at a gas/solid interface.

Ultrafast Electron Transfer in InP/ZnSe/ZnS Quantum Dots for Photocatalytic Hydrogen Evolution

InP/ZnS core/shell quantum dots have shown extraordinary application potential in photocatalysis. In this work, we demonstrated by ultrafast spectroscopy that the electron transfer ability of InP/ZnSe/ZnS core/shell/shell quantum dots was better than that of InP/ZnS quantum dots, because the introduction of ZnSe midshell resulted in improved passivation and greater exciton delocalization. The temperature-dependent PL spectra indicate that the exciton-phonon coupling strength and exciton binding energy of InP/ZnSe/ZnS quantum dots are smaller than those of InP/ZnS quantum dots. Further photocatalytic hydrogen evolution testing revealed that the photocatalytic activity of InP/ZnSe/ZnS quantum dots was significantly higher than that of InP/ZnS quantum dots, and InP/ZnSe/ZnS quantum dots even demonstrated improved stability. This research deepened our understanding of carrier dynamics and charge separation of InP/ZnSe/ZnS quantum dots, especially highlighting the application potential of InP/ZnSe/ZnS quantum dots in photocatalytic hydrogen evolution.

VO4 -Modified Layered Double Hydroxides Nanosheets for Highly Selective Photocatalytic CO2 Reduction to C1 Products

The conversion of CO₂ into high-value added chemicals driven by solar energy is an effective way to solve environmental problems, which is, however, largely restricted by the competition reaction of the hydrogen evolution reaction (HER) and easy electron-hole recombination, etc. Herein, VO₄ -supported ultrathin NiMgV-layered double hydroxide (V/NiMgV-LDH) nanosheets are successfully fabricated, and the extended X-ray absorption fine structure (EXAFS) and density function theory (DFT) calculations reveal that VO₄ species are located on the top of V atoms in the NiMgV-LDH laminate. The V/NiMgV-LDH is proved to be highly efficient for the photocatalytic CO₂ reduction reaction (CO₂ PR) with high selectivity of 99% for C1 products and nearly no HER (<1%) takes place under visible light. Contrast experiments using NiMgV-LDH as the catalyst for CO₂ PR show a CO selectivity of 71.40% and a H₂ selectivity of 28.11%. Such excellent performance of V/NiMgV-LDH can be attributed to the following reasons: 1) the V/NiMgV-LDH modulates the band structure and promotes the separation of electrons and holes; 2) strong bonding between V/NiMgV-LDH and CO* and H* facilitates the hydrogenation to form CH₄ and inhibits the formation of by-product H₂ at the same time.

Lead-Free Cs2TeX6 (X = Cl, Br, and I) Perovskite Microcrystals with High Stability for Efficient Photocatalytic CO2 Reduction

In response to calling for a sustainable and carbon-neutral economy, the conversion of CO₂ to useful chemicals using the solar energy is a potential tactic to relieve the global energy dilemma and environmental issues, which has been a hot topic so far. Recently, the lead halide perovskites as novel photocatalysts have attracted researchers' interests. However, they generally encounter poor stability and lead toxicity, restricting their large-scale practical applications. Here, the lead-free Cs₂TeX₆ (X = Cl, Cl_0.5Br_0.5, Br, Br_0.5I_0.5, and I) perovskite microcrystals with strong stability were prepared and used to realize the CO₂ photocatalytic reduction efficiently. The prepared Cs₂TeBr₆ microcrystals delivered stronger photocatalytic ability than many previously reported photocatalysts, with the CO and CH₄ yields of 308.63 and 60.42 μmolg^-1, respectively, under 3 h of illumination. The presented strategy in our work provides new ideas of designing and preparing efficient and practical CO₂ reduction photocatalysts based on nonleaded and high-stability halide perovskites.

All-Biobased Hydrovoltaic-Photovoltaic Electricity Generators for All-Weather Energy Harvesting

Hygroelectricity generators (HEGs) utilize the latent heat stored in environmental moisture for electricity generation, but nevertheless are showing relatively low power densities due to their weak energy harvesting capacities. Inspired by epiphytes that absorb ambient moisture and concurrently capture sunlight for dynamic photosynthesis, we propose herein a scenario of all-biobased hydrovoltaic-photovoltaic electricity generators (HPEGs) that integrate photosystem II (PSII) with Geobacter sulfurreducens (G.s) for simultaneous energy harvesting from both moisture and sunlight. This proof of concept illustrates that the all-biobased HPEG generates steady hygroelectricity induced by moisture absorption and meanwhile creates a photovoltaic electric field which further strengthens electricity generation under sunlight. Under environmental conditions, the synergic hydrovoltaic-photovoltaic effect in HPEGs has resulted in a continuous output power with a high density of 1.24 W/m2, surpassing all HEGs reported hitherto. This work thus provides a feasible strategy for boosting electricity generation via simultaneous energy harvesting from ambient moisture and sunlight.

Modulation of Trivalent/Tetravalent Metallic Elements in Ni-Based Layered Double Hydroxides for Photocatalytic CO2 Reduction

Herein, by modulating trivalent/tetravalent metallic elements, NiMLDHs (M = Al, Co, Fe, Mn, and Ti) were successfully prepared and evaluated in photocatalytic CO₂ reduction reaction (PCRR). Photocatalytic results declared that the electronic yields followed the order of NiTiLDH > NiCoLDH > NiFeLDH > NiMnLDH > NiAlLDH. Multiple characterizations affirmed that the introduction of various trivalent/tetravalent metallic elements could visibly affect the three critical aspects: (i) light harvesting; (ii) charge separation and transfer; and (iii) surface reactions, thus governing PCRR performance. Importantly, an in-depth mechanistic investigation was conducted by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments. These layered double hydroxides (LDHs) exhibited different adsorption/activation behaviors toward CO₂ molecule: NiAlLDH primarily converted CO₂ into b-CO₃^2- species; NiCoLDH, NiFeLDH, and NiMnLDH could induce c-CO₃^2- intermediate; NiTiLDH could generate a higher proportion of ^•CO₂^- species, which was an important intermediate to produce CO. More favorable carries separation and adsorption/activation process was presented upon NiTiLDH, thus more markedly enhancing photoactivity.

Reductive Carbon-Carbon Coupling on Metal Sites Regulates Photocatalytic CO2 Reduction in Water Using ZnSe Quantum Dots

Colloidal quantum dots (QDs) consisting of precious-metal-free elements show attractive potentials towards solar-driven CO₂ reduction. However, the inhibition of hydrogen (H₂ ) production in aqueous solution remains a challenge. Here, we describe the first example of a carbon-carbon (C-C) coupling reaction to block the competing H₂ evolution in photocatalytic CO₂ reduction in water. In a specific system taking ZnSe QDs as photocatalysts, the introduction of furfural can significantly suppress H₂ evolution leading to CO evolution with a rate of ≈5.3 mmol g^-1  h^-1 and a turnover number (TON) of >7500 under 24 h visible light. Meanwhile, furfural is upgraded to the self-coupling product with a yield of 99.8 % based on the consumption of furfural. Mechanistic insights show that the reductive furfural coupling reaction occurs on surface Zn-sites to consume electrons and protons originally used for H₂ production, while the CO formation pathway at surface anion vacancies from CO₂ remains.

A Stacked Plasmonic Metamaterial with Strong Localized Electric Field Enables Highly Efficient Broadband Light-Driven CO2 Hydrogenation

Light utilization largely governs the performance of CO₂ photoconversion, whereas most of the materials that are implemented in such an application are restricted in a narrow spectral absorption range. Plasmonic metamaterials with a designable regular pattern and facile tunability are excellent candidates for maximizing light absorption to generate substantial hot electrons and thermal energy. Herein, a concept of coupling a Au-based stacked plasmonic metamaterial with single Cu atoms in alloy, as light absorber and catalytic sites, respectively, is reported for gas-phase light-driven catalytic CO₂ hydrogenation. The metamaterial structure works in a broad spectral range (370-1040 nm) to generate high surface temperature for photothermal catalysis, and also induces strong localized electric field in favor of transfer of hot electrons and reduced energy barrier in CO₂ hydrogenation. This work unravels the significant role of a strong localized electric field in photothermal catalysis and demonstrates a scalable fabrication approach to light-driven catalysts based on plasmonic metamaterials.

Hybrid Metal-Organic Frameworks Encapsulated Hybrid Ni-Doped CdS Nanoparticles for Visible-Light-Driven CO2 Reduction

The photocatalytic production of syngas from CO₂ and water is an attractive and straightforward way for both solar energy storage and sustainable development. Here, we combined the hybrid shell of a bimetallic metal-organic framework (MOF) Zn/Co-zeolitic imidazolate framework (ZIF) and the hybrid photoactive center of Ni-doped CdS nanoparticles (Ni@CdS) to construct a new "2 + 2" photocatalysis system Ni@CdS⊂Zn/Co-ZIF through a facile self-assembly process, which exhibited a double-synergic effect for visible light harvesting and CO₂ conversion, leading to one of the highest photocatalytic syngas production rates and excellent recyclability. The H₂/CO of syngas ratios can be readily adjusted by controlling the ratio of Zn/Co in the hybrid MOF shell.