White‐Light Emission from Dual‐Way Photon Energy Conversion in a Dye‐Encapsulated Metal–Organic Framework

Unlocking multi-photon excited luminescence in pyrazolate trinuclear gold clusters for dynamic cell imaging

The family of coinage-metal-based cyclic trinuclear complexes exhibits abundant photophysical properties, promising for diverse applications. However, their utility in biochemistry is often hindered by large particle size and strong hydrophobicity. Meanwhile, the investigation into multi-photon excited luminescence within this family remained undocumented, limiting their potential in bio-imaging. Herein, we unveil the multi-photon excited luminescent properties of pyrazolate-based trinuclear gold(I) clusters, facilitated by excimeric gold(I)···gold(I) interactions, revealing a nonlinear optical phenomenon within this family. Furthermore, to address issues of poor biocompatibility, we employ electrospinning coupled with hydroxypropyl-beta-cyclodextrin as the matrix to fabricate a flexible, durable, transparent, and red emissive film with a photoluminescence quantum yield as high as 88.3%. This strategy not only produces the film with sufficient hydrophilicity and stability, but also achieves the downsizing of trinuclear gold(I) clusters from microscale to nanoscale. Following the instantaneous dissolution of the film in the media, the released trinuclear gold(I) nanoparticles have illuminated cells and bacteria through a real-time, non-toxic, multi-photon bio-imaging approach. This achievement offers a fresh approach for utilizing coinage-metal-based cyclic trinuclear complexes in biochemical fields.

Conformation-Driven Responsive 1D and 2D Lanthanide-Metal-Organic Framework Heterostructures for High-Security Photonic Barcodes

Development of luminescent segmented heterostructures featuring multiple spatial-responsive blocks is important to achieve miniaturized photonic barcodes toward anti-counterfeit applications. Unfortunately, dynamic manipulation of the spatial color at micro/nanoscale still remains a formidable challenge. Here, a straightforward strategy is proposed to construct spatially varied heterostructures through amplifying the conformation-driven response in flexible lanthanide-metal-organic frameworks (Ln-MOFs), where the thermally induced minor conformational changes in organic donors dramatically modulate the photoluminescence of Ln acceptors. Notably, compositionally and structurally distinct heterostructures (1D and 2D) are further constructed through epitaxial growth of multiple responsive MOF blocks benefiting from the isomorphous Ln-MOF structures. The thermally controlled emissive colors with distinguishable spectra carry the fingerprint information of a specific heterostructure, thus allowing for the effective construction of smart photonic barcodes with spatially responsive characteristics. The results will deepen the understanding of the conformation-driven responsive mechanism and also provide guidance to fabricate complex stimuli-responsive hierarchical microstructures for advanced optical recording and high-security labels.

Ligand Meta-Anchoring Strategy in Metal-Organic Frameworks for Remarkable Promotion of Quantum Yields

Aggregation is a conventional method to enhance the quantum yields (QYs) of pure organic luminophores due to the restriction of intramolecular motions (RIM). However, how to realize RIM in metal-organic frameworks (MOFs) is still unclear and challenging. In this work, the ligand meta-anchoring strategy is first proposed and proved to be an effective and systematic approach to restrict the intramolecular motions of MOFs for the QY improvement. By simply shifting the substituent position in the ligand from para to meta, the QY of the resulting MOF is significantly enhanced by eleven-fold. The value is even higher than that of ligand aggregates, demonstrating the strong RIM effect of this ligand meta-anchoring strategy. The introduction of co-ligand induces the appearance of visible yellow room temperature phosphorescence with a lifetime of 222 ms due to the QY enhancement and the charge transfer between the donor and accepter units. The present work thus broadens the understanding of the RIM mechanism from a new perspective, develops a novel method to realize RIM and expands the applicable objects from pure organic materials to organic-inorganic hybrid materials.

Encapsulated Dye in Coordination-Assembled Octahedron for Visible-Light-Driven Proton Reduction and Nitroaromatic Hydrogenation

To mimic the finely tuned natural photosynthetic systems, a large metal-organic octahedron was synthesized by one-pot self-assembly with modified triphenylamine ligands and redox-active cobalt ions. By encapsulating an organic dye, fluorescein (Fl), within the inner cavity of the octahedron, the host-guest supramolecular system was provided for light-driven hydrogen production. The intimate distance between the redox site and the photosensitizer in the supramolecular metal-organic cage allowed the photoinduced electrons to transfer from the excited state Fl* to the redox cobalt center in a pseudo-intramolecular pathway. The supramolecular system showed good performance in light-driven hydrogen production and the reduction of nitroaromatic compounds. Control experiments based on a mononuclear compound resembling a cobalt corner of the octahedron and inhibitor competition provided evidence of enzyme-like catalytic behavior. The supramolecular reaction pathways within confined spaces contribute to the superior activity of the host-guest system.

Switchable Anisotropic/Isotropic Photon Transport in a Double-Dipole Metal-Organic Framework via Radical-Controlled Energy Transfer

Directional control of photon transport at micro/nanoscale holds great potential in developing multifunctional optoelectronic devices. Here, the switchable anisotropic/isotropic photon transport is reported in a double-dipole metal-organic framework (MOF) based on radical-controlled energy transfer. Double-dipole MOF microcrystals with transition dipole moments perpendicular to each other have been achieved by the pillared-layer coordination strategy. The energy transfer between the double dipolar chromophores can be modulated by the photogenerated radicals, which permits the in situ switchable output on both polarization (isotropy/anisotropy state) and wavelength information (blue/red-color emission). On this basis, the original MOF microcrystal with isotropic polarization state displays the isotropic photon transport and similar reabsorption losses at various directions, while the radical-affected MOF microcrystal with anisotropic polarization state shows the anisotropic photon transport with distinct reabsorption losses at different directions, finally leading to the in situ switchable anisotropic/isotropic photon transport. These results offer a novel strategy for the development of MOF-based photonic devices with tunable anisotropic performance.

Reticular synthesis of 8-connected carboxyl hydrogen-bonded organic frameworks for white-light-emission

The rational design and construction of hydrogen-bonded organic frameworks (HOFs) are crucial for enabling their practical applications, but controlling their structure and preparation as intended remains challenging. Inspired by reticular chemistry, two novel blue-emitting NKM-HOF-1 and NKM-HOF-2 were successfully constructed based on two judiciously designed peripherally extended pentiptycene carboxylic acids, namely H8PEP-OBu and H8PEP-OMe, respectively. The large pores within these two HOFs can adsorb fluorescent molecules such as diketopyrrolopyrrole (DPP) and 9-anthraldehyde (AnC) to form HOFs ⊃ DPP/AnC composites, subsequently used in the fabrication of white-light-emitting devices (WLEDs). Specifically, two WLEDs were assembled by coating NKM-HOF-1 ⊃ DPP-0.13/AnC-3.5 and NKM-HOF-2 ⊃ DPP-0.12/AnC-3 on a 330 nm ultraviolet LED bulb, respectively. The corresponding CIE coordinates were (0.29, 0.33) and (0.32, 0.34), along with corresponding color temperatures of 7815 K and 6073 K. This work effectively demonstrates the feasibility of employing reticular chemistry strategies to predict and design HOFs with specific topologies for targeted applications.

Fabrication of crown ether-containing copolymer porous membrane and their enhanced adsorption performance for cationic dyes: Experimental and DFT investigations

Adsorptive separation membranes are widely utilized for the removal of toxic dyeing pollutants from dyeing wastewater. However, developing novel adsorption membranes with large adsorption capacities and enhanced adsorption performance for dyes in actual wastewater poses a significant challenge. This study focuses on the fabrication of crown ether-containing copolymer porous membrane (CRPM) and investigation of the adsorption performance of dyes from aqueous solutions. The morphology structure and pore size distribution revealed that the membrane was endowed with rich micropores and hierarchical porous structures. Three typical cationic dyes (MB, RhB, CV) and an anionic dye (MO) were selected to evaluate the adsorption behavior. The results of adsorption isotherms and kinetics demonstrated that the adsorption data could be well-fitted using the Freundlich and pseudo-first-order kinetic models, the thermodynamic parameters revealed that the adsorption process of dyes on CRPM is a spontaneous endothermic reaction. The membrane exhibited excellent adsorption performance for cationic dyes, with RhB displaying a higher maximum adsorption capacity than previously reported porous membranes. Notably, dynamic adsorption-desorption filtration demonstrated a rapid removal efficiency, with RhB, MB, and CV achieving removal rates of 99.09%, 98.63%, and 99.14% respectively, after five cycles. The filtration volume of the CRPM membrane was 2.4-fold greater than that of a traditional PVDF membrane when applied to actual dyeing wastewater. DFT theoretical calculations were employed to elucidate the adsorption mechanism. These calculations confirmed the significant roles of electrostatic interactions, H-bonds and π-π interactions in facilitating the high-efficiency adsorption of cationic dyes. These findings highlight the potential of the crown ether-containing copolymer as a promising material for adsorption separation membranes in the treatment of dyeing wastewater.

Metal Clusters Confined in Chiral Zeolitic Imidazolate Framework for Circularly Polarized-Luminescence Inks

Chiroptical activities arising in nanoclusters (NCs) are emerging as one of the most dynamic areas of modern science. However, devising an overarching strategy that is capable of concurrently enhancing the photoluminescence (PL) and circularly polarized luminescence (CPL) of metal NCs remains a formidable challenge. Herein, gold and silver nanoclusters (AuNCs, AgNCs) are endowed with CPL, for the first time, through a universal host-guest approach─centered around perturbing a chiral microenvironment within chiral hosts, simultaneously enhancing emissions. Remarkably, the photoluminescence quantum yield (PLQY) of AuNCs has undergone an increase of over 200 times upon confinement, escalating from 0.05% to 12%, and demonstrates a CPL response. Moreover, a three-dimensional (3D) model termed "NCs@CMOF" featuring CPL activity is created using metal cluster-based assembly inks through the process of 3D printing. This work introduces a potentially straightforward and versatile approach for achieving both PL enhancement and CPL activities in metal clusters.

Overcoming challenges in cancer treatment: Nano-enabled photodynamic therapy as a viable solution

Cancer presents a formidable challenge, necessitating innovative therapies that maximize effectiveness while minimizing harm to healthy tissues. Nanotechnology has emerged as a transformative force in cancer treatment, particularly through nano-enabled photodynamic therapy (NE-PDT), which leverages precise and targeted interventions. NE-PDT capitalizes on photosensitizers activated by light to generate reactive oxygen species (ROS) that initiate apoptotic pathways in cancer cells. Nanoparticle enhancements optimize this process, improving drug delivery, selectivity, and ROS production within tumors. This review dissects NE-PDT's mechanistic framework, showcasing its potential to harness apoptosis as a potent tool in cancer therapy. Furthermore, the review explores the synergy between NE-PDT and complementary treatments like chemotherapy, immunotherapy, and targeted therapies, highlighting the potential to amplify apoptotic responses, enhance immune recognition of cancer cells, and inhibit resistance mechanisms. Preclinical and clinical advancements in NE-PDT demonstrate its efficacy across various cancer types. Challenges in translating NE-PDT into clinical practice are also addressed, emphasizing the need for optimizing nanoparticle design, refining dosimetry, and ensuring long-term safety. Ultimately, NE-PDT represents a promising approach in cancer therapy, utilizing the intricate mechanisms of apoptosis to address therapeutic hurdles. The review underscores the importance of understanding the interplay between nanoparticles, ROS generation, and apoptotic pathways, contributing to a deeper comprehension of cancer biology and novel therapeutic strategies. As interdisciplinary collaborations continue to thrive, NE-PDT offers hope for effective and targeted cancer interventions, where apoptosis manipulation becomes central to conquering cancer. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Spatially Resolved Organic Whispering-Gallery-Mode Hetero-Microrings for High-Security Photonic Barcodes

Whispering-gallery-mode (WGM) microcavities featuring distinguishable sharp peaks in a broadband exhibit enormous advantages in the field of miniaturized photonic barcodes. However, such kind of barcodes developed hitherto are primarily based on microcavities wherein multiple gain medias were blended into a single matrix, thus resulting in the limited and indistinguishable coding elements. Here, a surface tension assisted heterogeneous assembly strategy is proposed to construct the spatially resolved WGM hetero-microrings with multiple spatial colors along its circular direction. Through precisely regulating the charge-transfer (CT) strength, full-color microrings covering the entire visible range were effectively acquired, which exhibit a series of sharp and recognizable peaks and allow for the effective construction of high-quality photonic barcodes. Notably, the spatially resolved WGM hetero-microrings with multiple coding elements were finally acquired through heterogeneous nucleation and growth controlled by the directional diffusion between the hetero-emulsion droplets, thus remarkably promoting the security strength and coding capacity of the barcodes. The results would be useful to fabricate new types of organic hierarchical hybrid WGM heterostructures for optical information recording and security labels.

Single-phase white light material and antibiotic detection of lanthanide metal-organic frameworks

WLEDs have been widely used in lighting and display equipment due to their energy-saving and environment-friendly advantages, but it is still a great challenge to construct high-quality single-phase white light materials for the preparation of WLEDs. In this work, three Ln-MOFs (HNU-82-84) with the same structure were synthesized by assembling rare earth ions (Tb3+, Eu3+, La3+) and 4,4',4''-nitrilotribenzoic acid (H3TCA) ligands. The structure and optical properties of the three compounds were investigated. Under the ultraviolet lamp, HNU-82-84 displays green light, red light, and blue light emission, respectively. Based on the RGB principle, aiming at the single-phase white material, the proportion of adding rare earth ions is reasonably adjusted to design and synthesize the Ln-MOF (Eu0.015Tb0.037La0.148-TCA) with CIE chromaticity coordinates of (0.319, 0.344). In addition, the WLED was prepared by Eu0.015Tb0.037La0.148-TCA and commercial LED lamps. Furthermore, HNU-82 has strong fluorescence emission and good water stability and can be used to detect nitrofurazone (NZF) and nitrofurantoin (NFT). The concentrations of the aqueous solutions of NZF and NFT had a well correlated linear relationship with the fluorescence quenching effect of HNU-82, and the detection limits were 6.60 × 10-7 mol L-1 and 4.62 × 10-7 mol L-1, respectively. Hence, HNU-82 also has potential as a fluorescent sensor for the detection of NZF and NFT in the aquatic environment.

Confinement of Organic Dyes in UiO-66-Type Metal-Organic Frameworks for the Enhanced Synthesis of [1,2,5]Thiadiazole[3,4-g]benzoimidazoles

Organic dyes as non-noble metal photosensitizers have attracted increasing attention due to their environmental friendliness and sustainability but suffer from fast deactivation and low stability. Here, we reported a fruitful strategy by the confinement and stabilization of visible light-active signal unit organic dyes within the metal-organic frameworks (MOFs) and developed a series of heterogeneous photocatalysts dye@UiO-66s [dye = fluorescein (FL)/rhodamine B (RhB)/eosin Y (EY), UiO-66s = UiO-66, and Bim-UiO-66]. It has been demonstrated that the encapsulated dyes can effectively sensitize MOF hosts and dominate the band structures and photocatalytic activities of dye@UiO-66s regardless of the ligand functionalization of MOFs. Photocatalytic experiments showed that these dye@UiO-66s exhibit enhanced activities relative to free dyes and among them, FL@Bim-UiO-66 displays excellent efficiencies toward the green synthesis of new carbon-bridged annulations, [1,2,5]thiadiazole[3,4-g]benzoimidazoles in the yield of up to 98% at room temperature with outstanding stability and reusability. Furthermore, the intramolecular cyclization intermediate was captured and characterized by the single-crystal X-ray diffraction analysis.

Durable organic nonlinear optical membranes for thermotolerant lightings and in vivo bioimaging

Organic nonlinear optical materials have potential in applications such as lightings and bioimaging, but tend to have low photoluminescent quantum yields and are prone to lose the nonlinear optical activity. Herein, we demonstrate to weave large-area, flexible organic nonlinear optical membranes composed of 4-N,N-dimethylamino-4'-N'-methyl-stilbazolium tosylate@cyclodextrin host-guest supramolecular complex. These membranes exhibited a record high photoluminescence quantum yield of 73.5%, and could continuously emit orange luminescence even being heated at 300 °C, thus enabling the fabrication of thermotolerant light-emitting diodes. The nonlinear optical property of these membranes can be well-preserved even in polar environment. The supramolecular assemblies with multiphoton absorption characteristics were used for in vivo real-time imaging of Escherichia coli at 1000 nm excitation. These findings demonstrate to achieve scalable fabrication of organic nonlinear optical materials with high photoluminescence quantum yields, and good stability against thermal stress and polar environment for high-performance, durable optoelectronic devices and humanized multiphoton bio-probes.

Highly Tunable MOF Luminophores Featuring Anthracene Directed Assembly and Fluorescence Regulation

Metal-organic frameworks (MOFs) have been recognized as a potential platform for the development of tunable luminophores owing to their highly modulable structures and components. Herein, two MOF luminophores based on Cd(II) ions, 1,3,5-tri(4-pyridinyl)benzene (TPB), and 1,4-dicarboxybenzene (H₂BDC) were constructed. The directed assembly of the metal ions and organic linkers results in [Cd₂(BDC)₂(TPB)(H₂O)]·x(solvent) (MOF-1) featuring TPB-based blue fluorescence centered at 425 nm. By introducing anthracene as the structure directing agent (SDA) for assembly regulation, [Cd₂(BDC)(TPB)₂(NO₃)₂]·x(solvent) (MOF-2) was obtained, which reveals anthracene feeding-dependent high tunable emission in the 517-650 nm range. Detailed components, photophysical properties, and structural characteristics investigations of MOF-2 indicate the TPB and NO₃^- interactions as the origin of its redshifted emission compared with that of MOF-1. Furthermore, the fluorescence of MOF-2 was found to be regulatable by the anthracene feeding based on the SDA-determined crystallinity of the crystalline sample. All these results provided a unique example of the structural and fluorescence regulation of MOF luminophores.

Enhanced Luminescence of Dye-Decorated ZIF-8 Composite Films via Controllable D-A Interactions for White Light Emission

Metal-organic frameworks (MOFs) constructed by metal ions/clusters and organic linkers are used to encapsulate fluorescent guest species with aggregation-caused quenching (ACQ) effects to enhance fluorescence properties due to their porous structures and high specific surface areas. However, there would be a problem of matching between MOF pores and guest molecules' sizes. In this paper, amorphous ZIF-8 was modified by carboxyl functional groups (H₃BTC-ZIF-8) via introducing the 1,2,4-benzenetricarbonic acid (H₃BTC) ligand into the ZIF-8 sol system. Moreover, H₃BTC-ZIF-8 was used for the loading of organic fluorescent dyes rhodamine 6G (R6G) and coumarin 151 (C151) to prepare R6G/C151/H₃BTC-ZIF-8 composite films. A white-light-emitting composite film (R6G/C151/H₃BTC-ZIF-8) with CIE coordinates of (0.323, 0.347) was successfully prepared by compounding fluorescent dyes (R6G and C151) with H₃BTC-modified ZIF-8, whose photoluminescence quantum yield (PLQY) can reach 64.0%. It was higher than the PLQY of the composite films prepared by crystalline ZIF-8 (40.2%) or amorphous ZIF-8 without H₃BTC (48.0%) compounded with the same concentrations of dyes. The fluorescence enhancement was probably attributed to an increased amount of active sites of H₃BTC-modified ZIF-8 interacting with dyes C151 and R6G. This can form hydrogen bonds between H₃BTC-ZIF-8 and C151, and weak electron donor-acceptor (D-A) interactions between H₃BTC-ZIF-8 and R6G molecules, respectively, thus enhancing the interactions between dyes and ZIF-8 and reducing the ACQ effect existing between dye molecules. Therefore, this strategy could provide an important guidance to develop white-light-emissive materials.

Metal-Organic Frameworks-Based Optical Nanosensors for Analytical and Bioanalytical Applications

Metal-organic frameworks (MOFs)-based optical nanoprobes for luminescence and surface-enhanced Raman spectroscopy (SERS) applications have been receiving tremendous attention. Every element in the MOF structure, including the metal nodes, the organic linkers, and the guest molecules, can be used as a source to build single/multi-emission signals for the intended analytical purposes. For SERS applications, the MOF can not only be used directly as a SERS substrate, but can also improve the stability and reproducibility of the metal-based substrates. Additionally, the porosity and large specific surface area give MOF a sieving effect and target molecule enrichment ability, both of which are helpful for improving detection selectivity and sensitivity. This mini-review summarizes the advances of MOF-based optical detection methods, including luminescence and SERS, and also provides perspectives on future efforts.

Encapsulating Organic Dyes in Metal-Organic Frameworks for Color-Tunable and High-Efficiency White-Light-Emitting Properties

The design of white-light phosphor is highly desirable for practical applications in SSL (solid-state lighting) and its related fields. Dye-loaded metal-organic frameworks (MOFs) have been widely demonstrated as one type of promising down conversion materials for WLEDs (white-light-emitting diodes), but two issues (dye leakage and inadequate quantum efficiency) require to be addressed before possible applications. Here, a series of single-phase dyes@In-MOF phosphors have been prepared in two different ways: the in-situ process and soaking method. The study of these dyes@In-MOF phosphors confirms the importance of this in-situ process that could effectively increase dye loading and quantum efficiency and greatly decrease dye leakage. As a result, a perfect WLED, fabricated using the in-situ-synthesized (AF/RhB@In-MOF)-3 (AF: Acriflavine; RhB: Rhodamine B) and 450 nm blue LED chip, exhibited a very high quantum yield (QY, up to 42.27%), a high luminous efficacy (LE) of 50.75 lm/W, a high color rendering index (CRI) of 91.2, and nearly identical Commission International ed'Eclairage (CIE) coordinates (0.33,0.31), indicating the potential application of the dye-loaded MOFs with good color quality in smart white LEDs.

Mixed-Metal and Mixed-Ligand Lanthanide Metal-Organic Frameworks Based on 2,6-Naphthalenedicarboxylate: Thermally Activated Sensitization and White-Light Emission

Trivalent lanthanide ions (Ln³⁺) hold an exceptional position in the field of optoelectronic materials due to their atomic-like emission spectra and long luminescence lifetimes. Metal-organic frameworks (MOFs) and coordination polymers are particularly suited as luminescent materials due to their structural diversity and ease of functionalization both at bridging ligands and/or metal centers. In this contribution, we present a series of mixed-metal Ln³⁺/Eu³⁺ (Ln = La, Gd) and mixed-ligand (2,6-naphthalenedicarboxylate (ndc^2-) and 4-aminonaphthalene-2,6-dicarboxylate (andc^2-)) MOFs belonging to three different structural types, with emissions spanning most of the visible region, thereby constituting favorable materials for color tuning and white-light emission. We investigate the thermal stability and photophysical properties of the synthesized materials with regard to their metal and ligand doping levels and structural type, where we discuss excimer and monomer emission. The photophysical study, involving both steady-state and time-resolved luminescence measurements, allows us to discuss the possible energy migration and Eu³⁺ sensitization pathways that take place within these materials following ligand excitation. Low-temperature luminescence studies led us to determine the energies of the ligand-based excited states and investigate their participation in thermally activated energy transfer mechanisms within the studied lattices. We observe emission quantum yields of up to 87% for the Eu³⁺-doped materials, while their ligand- and metal-doped counterparts show decreased quantum yields of up to 17%. Finally, we attempt fine color tuning by carefully adjusting the doping levels to achieve yellow and white-light emission.

Tunable fluorescence emission based on multi-layered MOF-on-MOF

Luminescent metal-organic frameworks (MOFs) have garnered considerable attention in various fields. Herein, we proposed a hierarchical confinement strategy based on MOF-on-MOF to tune luminescence emission ranging from blue to red including white light in a flexible way. The easily available ZIF-8 MOF was used as a host for the confinement of two kinds of size-matching dyes (perylene and rhodamine B) to obtain a layered ZIF-8@dye@ZIF-8@dye via in situ encapsulation and seed-mediated synthesis. ZIF-8@dye@ZIF-8@dye materials with different fluorescence emission in dispersed and solid states were both obtained by tuning the initial encapsulation concentration of dye and changing the structure of the inner and outer ZIF-8@dye layers. To our delight, ZIF-8@0.125perylene@ZIF-8@25RhB with white light emission in the dispersed state was obtained; meanwhile, ZIF-8@0.125perylene + 25RhB and mechanically mixed ZIF-8@0.125perylene + ZIF-8@25RhB could not realize white light emission under the same conditions, indicating that the proposed hierarchical confinement strategy facilitated white light regulation. Similarly, the emission of ZIF-8@dye@ZIF-8@dye in the solid state has also been investigated; ZIF-8@perylene@ZIF-8@3RhB with white light emission was obtained, while white light emission could not be achieved in ZIF-8@perylene + 3RhB and ZIF-8@perylene + ZIF-8@3RhB, which further indicated the importance of the hierarchical confinement strategy based on MOF-on-MOF. The proposed hierarchical confinement strategy may also inspire the development of other functional optical MOF materials.

Confinement of Luminescent Guests in Metal-Organic Frameworks: Understanding Pathways from Synthesis and Multimodal Characterization to Potential Applications of LG@MOF Systems

This review gives an authoritative, critical, and accessible overview of an emergent class of fluorescent materials termed "LG@MOF", engineered from the nanoscale confinement of luminescent guests (LG) in a metal-organic framework (MOF) host, realizing a myriad of unconventional materials with fascinating photophysical and photochemical properties. We begin by summarizing the synthetic methodologies and design guidelines for representative LG@MOF systems, where the major types of fluorescent guest encompass organic dyes, metal ions, metal complexes, metal nanoclusters, quantum dots, and hybrid perovskites. Subsequently, we discuss the methods for characterizing the resultant guest-host structures, guest loading, photophysical properties, and review local-scale techniques recently employed to elucidate guest positions. A special emphasis is paid to the pros and cons of the various methods in the context of LG@MOF. In the following section, we provide a brief tutorial on the basic guest-host phenomena, focusing on the excited state events and nanoscale confinement effects underpinning the exceptional behavior of LG@MOF systems. The review finally culminates in the most striking applications of LG@MOF materials, particularly the "turn-on" type fluorochromic chemo- and mechano-sensors, noninvasive thermometry and optical pH sensors, electroluminescence, and innovative security devices. This review offers a comprehensive coverage of general interest to the multidisciplinary materials community to stimulate frontier research in the vibrant sector of light-emitting MOF composite systems.

Multi-Emission from Single Metal-Organic Frameworks under Single Excitation

Multi-emission materials have come to prominent attention ascribed to their extended applications other than single-emission ones. General and robust design strategies of a single matrix with multi-emission under single excitation are urgently required. Metal-organic frameworks (MOFs) are porous materials prepared with organic ligands and metal nodes. The variety of metal nodes and ligands makes MOFs with great superiority as multi-emission matrices. Guest species encapsulated into the channels or pores of MOFs are the additional emission sites for multi-emission. In this review, multi-emission MOFs according to the different excitation sites are summarized and classified. The emission mechanisms are discussed, such as antenna effect, excited-state intramolecular proton transfer (ESIPT) and tautomerism for dual-emission. The factors that affect the emissions are revealed, including ligand-metal energy transfer and host-guest interaction, etc. Multi-emission MOFs could be predictably designed and prepared, once the emissive factors are controlled rationally in combination with the different multi-emission mechanisms. Correspondingly, new and practical applications are realized, including but not limited to ratiometric/multi-target sensing and bioimaging, white light-emitting diodes, and anti-counterfeiting. The design strategies of multi-emission MOFs and their extensive applications are reviewed. The results will shed light on other multi-emission systems to develop the structure-derived functionality and applications.

Homologous targeting nanoparticles for enhanced PDT against osteosarcoma HOS cells and the related molecular mechanisms

BACKGROUND

No prominent advancements in osteosarcoma (OS) treatment have been made in the past 20 years. Although photodynamic therapy (PDT) is an emerging technique for cancer therapy, the lack of targeted photosensitizers for OS treatment severely limits its applications.

RESULTS

In this study, we constructed a potential theranostic nanoplatform by using (poly (lactic-co-glycolic) acid (PLGA) nanoparticles (NPs) encapsulating IR780 into the shell (PLGA-IR780 NPs), which were further camouflaged with human OS cell membranes from the HOS cell line (MH-PLGA-IR780 NPs). These constructed NPs showed the capacity for homologous targeting with excellent photoacoustic (PA)/fluorescence (FL) imaging ability. Benefitting from their homologous targeting capacity, MH-PLGA-IR780 NPs obviously promoted cell endocytosis in vitro and tumor accumulation in vivo, which could further improve PDT performance under near-infrared (NIR) irradiation. In addition, to their homologous targeting and PA/FL dual-mode imaging ability, MH-PLGA-IR780 NPs had advantages in penetrating deeper into tumor tissues and in real-time dynamic distribution monitoring in vivo, which laid a foundation for further clinical applications in OS. Moreover, we demonstrated that PDT guided by the constructed NPs could significantly induce HOS cells apoptosis and ferroptosis via excessive accumulation of reactive oxygen species (ROS), and further determined that the potential anticancer molecular mechanism of apoptosis was triggered by the release of cytochrome c-activated mitochondrial apoptosis (endogenous apoptosis), and that ferroptosis caused the activation of nuclear receptor coactivator 4 (NCOA4)-mediated ferritinophagy and the inactivation of glutathione peroxidase 4 (GPX4), synergistically leading to excessive accumulation of Lipid-ROS and Lipid peroxides (LPOs). Concurrently, MH-PLGA-IR780 NPs-guided PDT also showed an obvious inhibitory effect on tumor growth in vivo.

CONCLUSION

These results suggest that this homologous targeting-based theranostic nanoplatform provides an effective method to improve PDT performance in OS and contributes a new and promising approach for OS therapy.

A biological luminescent metal-organic framework with high fluorescence quantum yield for the selective detection of amino acids and monosaccharides

The biological luminescent metal-organic framework (bio-LMOF), (Me2NH2)2[Zn6O(Ade)4(TCPPE)2] (1) {H4TCPPE = tetrakis[4-(4-carboxyphenyl)phenyl]ethene, Ade = adenine} was successfully designed and synthesized under hydrothermal conditions, with two channels of different sizes. The absolute fluorescence quantum yields of complex 1 and activated 1 are up to 77.6% and 85.9%, respectively. Activated 1 exhibits outstanding water stability and excellent selective luminescence sensing for amino acids and monosaccharides. The fluorescence quenching efficiencies of activated 1 towards L-Nph and D-Nga are 86.35% and 91.60%, respectively. Besides, activated 1 also displays highly quenching responses to L-Nph and D-Nga at fairly low concentrations, and the limits of detection for L-Nph and D-Nga are estimated to be 0.149 ppm and 1.612 ppm, respectively. Meanwhile, in multiple cycling experiments, activated 1 still has excellent cycling stability. These phenomena indicate that activated 1 can be utilized as a fast responsive biological luminescent sensor, which is a rare example for bio-LMOFs.

Luminescent MOFs (LMOFs): Recent Advancement Towards a Greener WLED Technology

The replacement of the traditional incandescent, halogen and fluorescent lamps by white light emitting diodes (WLEDs) is expected to reduce the global electricity consumption by one-third by 2030, according to...

Functionally modified metal–organic frameworks for the removal of toxic dyes from wastewater

This review highlights recent advancement in functional modified (FM) MOFs as superior adsorbents for the removal of dyes, classifying them by various modification strategies. The adsorption interactions affected by the FM approach are summarized.

Methyl Blue@CUST-580 composite as a simultaneous fluorescence-enhanced dual-emission platform for enhanced detection of antibiotics

A novel Cd-based MOF fluorescent sensor, [(Cd)2O(BIMB)0.5(BTB)] [CUST-580, H3BTB= 1,3,5- Tris(4-carboxyphenyl) benzene, BIMB = 1,4-Bis((1H-imidazoi-1-yl) methyl) bezene] was successfully synthesized by solvothermal condition. Due to the unique 3D spatial structure...

A Luminescent Guest@MOF Nanoconfined Composite System for Solid-State Lighting

A series of rhodamine B (RhB) encapsulated zeolitic imidazolate framework-8 (RhB@ZIF-8) composite nanomaterials with different concentrations of guest loadings have been synthesized and characterized in order to investigate their applicability to solid-state white-light-emitting diodes (WLEDs). The nanoconfinement of the rhodamine B dye (guest) in the sodalite cages of ZIF-8 (host) is supported by fluorescence spectroscopic and photodynamic lifetime data. The quantum yield (QY) of the luminescent RhB@ZIF-8 material approaches unity when the guest loading is controlled at a low level: 1 RhB guest per ~7250 cages. We show that the hybrid (luminescent guest) LG@MOF material, obtained by mechanically mixing a suitably high-QY RhB@ZIF-8 red emitter with a green-emitting fluorescein@ZIF-8 “phosphor” with a comparably high QY, could yield a stable, intensity tunable, near-white light emission under specific test conditions described. Our results demonstrate a novel LG@MOF composite system exhibiting a good combination of photophysical properties and photostability, for potential applications in WLEDs, photoswitches, bioimaging and fluorescent sensors.

Tailoring Heterogeneous Catalysts at the Atomic Level: In Memoriam, Prof. Chia-Kuang (Frank) Tsung

Professor Chia-Kuang (Frank) Tsung made his scientific impact primarily through the atomic-level design of nanoscale materials for application in heterogeneous catalysis. He approached this challenge from two directions: above and below the material surface. Below the surface, Prof. Tsung synthesized finely controlled nanoparticles, primarily of noble metals and metal oxides, tailoring their composition and surface structure for efficient catalysis. Above the surface, he was among the first to leverage the tunability and stability of metal-organic frameworks (MOFs) to improve heterogeneous, molecular, and biocatalysts. This article, written by his former students, seeks first to commemorate Prof. Tsung's scientific accomplishments in three parts: (1) rationally designing nanocrystal surfaces to promote catalytic activity; (2) encapsulating nanocrystals in MOFs to improve catalyst selectivity; and (3) tuning the host-guest interaction between MOFs and guest molecules to inhibit catalyst degradation. The subsequent discussion focuses on building on the foundation laid by Prof. Tsung and on his considerable influence on his former group members and collaborators, both inside and outside of the lab.

Interpenetrated Metal-Porphyrinic Framework for Enhanced Nonlinear Optical Limiting

Structural interpenetration in metal-organic frameworks (MOFs) significantly impacts on their properties and functionalities. However, understanding the interpenetration on third-order nonlinear optics (NLO) of MOFs have not been reported to date. Herein, we report two 3D porphyrinic MOFs, a 2-fold interpenetrated [Zn₂(TPyP)(AC)₂] (ZnTPyP-1) and a noninterpenetrated [Zn₃(TPyP)(H₂O)₂(C₂O₄)₂] (ZnTPyP-2), constructed from 5,10,15,20-tetra(4-pyridyl)porphyrin (TPyP(H₂)) and Zn(NO₃)₂ (AC = acetate, C₂O₄ = oxalate). ZnTPyP-1 achieves excellent optical limiting (OL) performance with a giant nonlinear absorption coefficient (3.61 × 10⁶ cm/GW) and large third-order susceptibility (7.73 × 10^-7 esu), which is much better than ZnTPyP-2 and other reported OL materials. The corresponding MOFs nanosheets are dispersed into a polydimethylsiloxane (PDMS) matrix to form highly transparent and flexible MOFs/PDMS glasses for practical OL application. In addition, the OL response optimized by adjusting the MOFs concentration in the PDMS matrix and the type of metalloporphyrin are discussed in the ZnTPyP-1 system. The theoretical calculation confirmed that the abundant π-π interaction from porphyrinic groups in the interpenetrated framework increased the electron delocalization/transfer and boosted the OL performance. This study opens a new avenue to enhance OL performance by the construction of interpenetrated structures and provides a new approach for the preparation of transparent and flexible MOF composites in nonlinear optical applications.

Encapsulation of Dyes in Luminescent Metal-Organic Frameworks for White Light Emitting Diodes

The development of white light emitting diodes (WLEDs) holds great promise for replacing traditional lighting devices due to high efficiency, low energy consumption and long lifetime. Metal-organic frameworks (MOFs) with a wide range of luminescent behaviors are ideal candidates to produce white light emission in the phosphor-converted WLEDs. Encapsulation of emissive organic dyes is a simple way to obtain luminescent MOFs. In this review, we summarize the recent progress on the design and constructions of dye encapsulated luminescent MOFs phosphors. Different strategies are highlighted where white light emitting phosphors were obtained by combining fluorescent dyes with metal ions and linkers.

Generating circularly polarized luminescence from clusterization-triggered emission using solid phase molecular self-assembly

Purely-organic clusterization-triggered emission (CTE) has displayed promising abilities in bioimaging, chemical sensing, and multicolor luminescence. However, it remains absent in the field of circularly polarized luminescence (CPL) due to the difficulties in well-aligning the nonconventional luminogens. We report a case of CPL generated with CTE using the solid phase molecular self-assembly (SPMSA) of poly-L-lysine (PLL) and oleate ion (OL), that is, the macroscopic CPL supramolecular film self-assembled by the electrostatic complex of PLL/OL under mechanical pressure. Well-defined interface charge distribution, given by lamellar mesophases of OL ions, forces the PLL chains to fold regularly as a requirement of optimal electrostatic interactions. Further facilitated by hydrogen bonding, the through-space conjugation (TSC) of orderly aligned electron-rich O and N atoms leads to CTE-based CPL, which is capable of transferring energy to an acceptor via a Förster resonance energy transfer (FRET) process, making it possible to develop environmentally friendly and economic CPL from sustainable and renewable materials.

Progress in Multifunctional Metal-Organic Frameworks/Polymer Hybrid Membranes

The fabrication of state-of-the-art membranes with customized functions and high efficiency is of great significance, but presents challenges. Emerging metal-organic frameworks (MOFs)/polymer hybrid membranes have provided bright promise as an innovative platform to target multifunctional hybrid materials and devices; this is thanks to their unique properties, which come from three components that are collaboratively enforced. This minireview provides a brief overview of recent progress in the construction of such hybrid membranes, and highlights some of their very important applications in separation, conduction, and sensing.

Intense multi-colored luminescence in a series of rare-earth metal-organic frameworks with aliphatic linkers

Two series of highly luminescent yttrium(iii), europium(iii) and terbium(iii) metal-organic frameworks containing diimine aromatic ligands and the dicarboxylate linker trans-1,4-cyclohexanedicarboxylate (chdc^2-) which can be described by the general formulas [M₂(bpy)₂(chdc)₃], where M = Y³⁺ (1), Eu³⁺ (2), and Tb³⁺ (3) and bpy = 2,2'-bipyridyl, and [M₂(phen)₂(chdc)₃], where M = Y³⁺ (4), Eu³⁺ (5), and Tb³⁺ (6) and phen = 1,10-phenanthroline, were synthesized and characterized. All compounds are based on the same dinuclear {M₂(L)₂(OOCR)₆} building blocks and possess a similar topology of the 3D framework with narrow pores. The chelate aromatic ligands act as efficient light-harvesting antennas for subsequent energy transfer to the emitting metal center (M = Eu³⁺, Tb³⁺) or intraligand photoemission (M = Y³⁺). As a result, the reported compounds display intense emission in the red (Eu³⁺), green (Tb³⁺) or blue (Y³⁺) regions representing three basic colors (RGB) of visible light. The measured quantum yields (QYs) of the solid-state luminescence for individual compounds were found to be 63% (1), 46% (2), 59% (3), 2.3% (4), 55% (5) and 49% (6). The drastic reduction of the luminescence efficiency for 4 is explained by the strong disorder of phen ligands. The high thermal stability (up to 300 °C) and exceptional moisture resistance of the bpy-based frameworks 1-3 were confirmed by TG and PXRD measurements. Various bimetal or trimetal compositions were also prepared for the bpy-series. The luminescence properties of these mixed-metal compounds depend on both the chemical composition and excitation wavelength (λ_ex). Remarkably, pure white emission with color temperature = 6126 K was achieved for [Y_1.68Eu_0.08Tb_0.24(bpy)₂(chdc)₃] at λ_ex = 360 nm with QY = 20%. The reported results suggest that the obtained coordination framework series is a convenient platform for the design of highly efficient light emitting materials with tunable properties.

Dual-functional porous MOFs with hierarchical guest encapsulation for room-temperature phosphorescence and white-light-emission

The development of optical materials with room temperature phosphorescence (RTP) and white light emission (WLEDs) is highly desirable and remains a challenging task. Herein, a porous metal-organic framework PCN-921 with a high quantum yield (Φ_F = 93.6%) was achieved. To make full use of the advantages of the high porosity of PCN-921, we hierarchically encapsulated different guest molecules coronene and rhodamine B (RhB) into the framework. Unsurprisingly, the hybrid material coronene@PCN-921 was obtained after in situ encapsulation of the guest coronene into the framework, and it exhibits obvious RTP behavior with a long phosphorescence lifetime of 62.5 ns. Subsequently, second guest RhB molecules were introduced after soaking in RhB solution and the material RhB@coronene@PCN-921 was achieved. Interestingly, it exhibits white light emission with the CIE coordinates of (0.29, 0.34), and can be used as a high performance WLED lamp. This is the first work on dual-functional hybrid dyes@MOFs with hierarchical guest encapsulation for RTP and white light emission, which suggests the potential applications of MOFs in multifunctional optical devices.

Synthesis and Properties of BODIPY Appended Tetraphenylethylene Scaffolds as Photoactive Arrays

Tetraphenylethylene (TPE) and its derivatives exhibit excellent aggregation-induced emission (AIE) properties. The TPE unit is easily accessible, and many functional groups can be introduced in a facile manner to yield effective luminescent materials in both solution and the solid-state. It is because of this, several TPE-based compounds have been developed and applied in many areas, such as OLEDs and chemical sensors. Boron dipyrromethenes (BODIPYs) are a class of pyrrolic fluorophore of great interest with myriad application in both material science and biomedical applications. Through the combination of Pd-catalyzed cross-coupling reactions and traditional dipyrromethene chemistry, we present the syntheses of novel tetra-BODIPY-appended TPE derivatives with different distances between the TPE and BODIPY cores. The TPE-BODIPY arrays 6 and 9 show vastly differing AIE properties in THF/H2O systems, with 9 exhibiting dual-AIE, along with both conjugates being found to produce singlet oxygen (1O2). We presume the synthesized BODIPY-appended TPE scaffolds to be utilized for potential applications in the fields of light-emitting systems and theranostics.

Dye encapsulation engineering in a tetraphenylethylene-based MOF for tunable white-light emission

The development of efficient and stable white-light emissive materials is highly desirable in displays and solid-state lighting. Here we present a high-quality white-light emitter based a dual-emitting MOF hybrid, which is achieved by dye encapsulation engineering within a robust Zr-MOF (PCN-128W) containing a highly luminescent tetraphenylethylene-based ligand. The pore confinement effect well isolates the incorporated dye molecules (trans-4-[4-(Dimethylamino)styryl]-1-methylpyridinium iodide (DSM)) and therefore suppress the aggregation caused luminescence quenching. The dye emission is mainly sensitized by PCN-128W host through Förster resonance energy transfer (FRET), and the FRET process is incomplete, thus enabling the hybrid to feature dual emissions upon a single excitation. The emission color of DSM@PCN-128W hybrid can be systematically tuned from blue to white, and to orange by regulating the dye encapsulation content. A broad white-light emission with a considerably high quantum yield (21.2%) is obtained in the case of dye contents of 0.15 wt%. The luminescence of DSM@PCN-128W hybrid is stable in ambient air for over 1 month, and show good resistance to continuous UV light irradiation, owing to the protective MOF Matrix that largely inhibits the UV exposure to dye molecules. What's more, by combining DSM@PCN-128W with a commercial UV LED chip, we fabricate a white-light emitting prototype device showing CIE chromaticity coordinates of (0.34, 0.33), a CRI of 79.1, and a CCT of 5525 K.

Angle-Dependent Polarized Emission and Photoelectron Performance of Dye-Encapsulated Metal-Organic Framework

Molecule-based crystalline materials with angle-dependent polarized emission have attracted considerable attention owing to their extensive applications in displays and anticounterfeiting. Herein, one anionic metal-organic framework (MOF) {[Zn_2.5(μ₃-OH)(NDC)₂(HNDC)](HPIM)}_n was constructed on the basis of an excellent photoactive ligand naphthalene-1,4-dicarboxylic acid (H₂NDC). The protonated 2-propylimidazole (HPIM) guests residing in the nanochannels of MOF can be exchanged by a D-π-A cationic dye. The resulted host-guest system shows a rare example of ratiometric fluorescent polarizations and highly enhanced photoelectron performance in comparison with the pristine MOF.

Unprecedented Improvement of Near-Infrared Photothermal Conversion Efficiency to 87.2% by Ultrafast Non-radiative Decay of Excited States of Self-Assembly Cocrystal

Near-infrared (NIR) photothermal conversion is of great interest in many fields. Here, a self-assembly organic cocrystal (N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD) and pyromellitic dianhydride (PMDA)) with strong absorption in NIR range is constructed, with widespread absorption (200-1500 nm) and very high NIR photothermal conversion efficiency (87.2%). Essentially, in this cocrystal, a small HOMO-LUMO gap of donor-acceptor pair boosts the absorption ability of this cocrystal in the NIR range. The mixed stacking structure significantly enhances the intermolecular interactions as well as the electron-hole delocalization, suppressing the emission processes, leading to nonradiative decay processes from excited states. Strong intermolecular interactions enable the cocrystal to have dense electronic energy levels, leading to a high proportion (94.4%) vibrational cooling and internal conversion processes with ultrafast excited-state relaxation (0.12 ps), which contributes to high NIR photothermal conversion efficiency. Furthermore, the cocrystal has exhibited capable ability for being an excellent candidate for a NIR photothermal therapy agent.

Classified Encapsulation of an Organic Dye and Metal-Organic Complex in Different Molecular Compartments for White-Light Emission and Selective Adsorption of C2H2 over CO2

Encapsulating a certain guest molecule in an assigned molecular compartment and then endowing the corresponding potential remains a huge challenge for metal-organic frameworks. To this end, we demonstrate a good example, for the first time, based on an actinide-based MOF. The used MOF (namely, ECUT-300) shows a unique uranyl-TPE anionic skeleton with three distinct cages, viz., mesopore A (2.8 nm), mesopore B (2.0 nm), and micropore C (0.9 nm). Through solid-liquid reaction, a RhB⁺ molecule can be encapsulated into ECUT-300 with the exact location in mesopore B, whereas the encapsulation of a metal-organic cation of [Fe(tpy)₂]³⁺ was observed with the location in micropore C, suggesting unprecedented classified encapsulation. Impressively, the potential of the resulting guest@MOF composites is also highly dependent on the type of encapsulated guest molecules, for example, white-light emission for RhB⁺ and selective adsorption of C₂H₂ over CO₂ for [Fe(tpy)₂]³⁺.