pH‐Responsive Torpedo‐Like Persistent Luminescence Nanoparticles for Autofluorescence‐Free Biosensing and High‐Level Information Encryption

Cellulose nanocrystal thermal smart molecular brushes with upper critical aggregation temperature

Grafting thermo-responsive polymers onto cellulose nanocrystals (CNCs) and achieving critical temperature regulation has drawn significant research interest. The thermal transition behavior of CNCs can be controlled by adjusting the polymer molecular brushes on the CNCs surface. We synthesized poly((2-dimethylamino) ethyl methacrylate) (PDMAEMA) grafted CNCs via surface-initiated reversible addition-fragmentation chain transfer, followed by modifying PDMAEMA brushes into poly-3-dimethyl(methacryloyloxyethyl) ammonium propane sulfonate (PDMAPS) brushes via quaternization. The critical temperature was regulated by modifying and grafting of poly (ethylene glycol) methacrylate. Found the thermal stimulus-responsive type and transition point of CNCs can be controlled by adjusting the surface molecular brushes. Ultraviolet-visible spectroscopy and dynamic light scattering analyses indicated that CNC-PDMAEMA aggregated above 70 °C, whereas CNC-PDMAPS aggregated below 31 °C. The thermo-responsive materials based on CNCs exhibited a conversion from a lower critical aggregation temperature to an upper critical aggregation temperature (UCAT) type. CNC-PDMAPS-mPEG was obtained by modifying and grafting for UCAT to be regulated to approximately 37 °C, which is close to the human body temperature. CNC-PDMAPS and CNC-PDMAPS-mPEG exhibited only microscopic alterations and could encapsulate and release substances. Therefore, they demonstrate considerable potential for biomedical applications.

Persistent Luminescence Lifetime-Based Near-Infrared Nanoplatform via Deep Learning for High-Fidelity Biosensing of Hypochlorite

In light of deep tissue penetration and ultralow background, near-infrared (NIR) persistent luminescence (PersL) bioprobes have become powerful tools for bioapplications. However, the inhomogeneous signal attenuation may significantly limit its application for precise biosensing owing to tissue absorption and scattering. In this work, a PersL lifetime-based nanoplatform via deep learning was proposed for high-fidelity bioimaging and biosensing in vivo. The persistent luminescence imaging network (PLI-Net), which consisted of a 3D-deep convolutional neural network (3D-CNN) and the PersL imaging system, was logically constructed to accurately extract the lifetime feature from the profile of PersL intensity-based decay images. Significantly, the NIR PersL nanomaterials represented by Zn1+xGa2-2xSnxO4: 0.4 % Cr (ZGSO) were precisely adjusted over their lifetime, enabling the PersL lifetime-based imaging with high-contrast signals. Inspired by the adjustable and reliable PersL lifetime imaging of ZGSO NPs, a proof-of-concept PersL nanoplatform was further developed and showed exceptional analytical performance for hypochlorite detection via a luminescence resonance energy transfer process. Remarkably, on the merits of the dependable and anti-interference PersL lifetimes, this PersL lifetime-based nanoprobe provided highly sensitive and accurate imaging of both endogenous and exogenous hypochlorite. This breakthrough opened up a new way for the development of high-fidelity biosensing in complex matrix systems.

Functional Green-Emitting Mn2+-doped Zinc Germanate Persistent Luminescent Nanoparticles for Dual-Mode Immunochromatographic Detection

Immunochromatography is a commonly used immediate detection technique, using signal labels to generate detection signals for rapid medical diagnosis. However, its detection sensitivity is affected by background fluorescence caused by the excitation light source. We have developed an immunochromatographic test strip using Zn2GeO4:Mn2+ (ZGM) persistent luminescent nanoparticles (PLNPs) for immediate fluorescence detection and highly sensitive persistent luminescence (PersL) detection without background fluorescence interference. ZGM emits a strong green light when exposed to ultraviolet (UV) excitation, and its green PersL can persist for over 30 min after the excitation light is turned off. We modified the surface of ZGM with heparin-binding protein (HBP) antibodies to create immunochromatographic test strips for the detection of HBP as the target analyte. Under UV excitation, the chromatography test paper can be visually observed at concentrations as low as 25 ng/mL. After the excitation light source is switched off, PersL can achieve a detection limit of 4.7 ng/mL without background interference. This dual-mode immunochromatographic detection, based on ZGM, shows great potential for in vitro diagnostic applications.

Multicolor-emitting Er3+ and Er3+/Yb3+ doped Zn2GeO4 phosphors combining static and dynamic identifications for advanced anti-counterfeiting application

Anti-counterfeiting labels based on luminescence materials are a newly emerging technique for protecting legal goods and intellectual property. In the anti-counterfeiting field to prevent forgery and cloning, luminescence materials with properties different from the commercialized and traditional ones are in urgent need. In this work, multicolor-emitting Er3+ single-doped and Er3+/Yb3+ co-doped Zn2GeO4 phosphors combining static and dynamic identifications were developed in order to achieve advanced anti-counterfeiting application. The variation of trap content with increasing the doping content of rare earth ions was analyzed through X - ray photoelectron spectroscopy, thermoluminescence analysis. It was found that there are two types of traps with different depth in Zn2GeO4 phosphors. The depths of the traps were experimentally confirmed to be 0.68 and 0.79 eV, respectively. The transient photocurrent response measurement confirmed the existence of charge carriers, and the mechanism for long persistent luminescence was deduced. The multicolor upconversion mechanisms under 980 and 1550 nm excitation were also discovered. Based on the multicolor steady and transient emission features, an anti-counterfeiting pattern was designed using the phosphors. Static and dynamic identification was demonstrated and presented in detail. Finally, it is indicated that the studied phosphors are excellent candidates for potential applications in luminescence anti-counterfeiting labels.

Multi-stimuli-responsive luminescence enabled by crown ether anchored chiral antimony halide phosphors

Stimuli-responsive optical materials have provided a powerful impetus for the development of intelligent optoelectronic devices. The family of organic-inorganic hybrid metal halides, distinguished by their structural diversity, presents a prospective platform for the advancement of stimuli-responsive optical materials. Here, we have employed a crown ether to anchor the A-site cation of a chiral antimony halide, enabling convenient control and modulation of its photophysical properties. The chirality-dependent asymmetric lattice distortion of inorganic skeletons assisted by a crown ether promotes the formation of self-trapped excitons (STEs), leading to a high photoluminescence quantum yield of over 85%, concomitant with the effective circularly polarized luminescence. The antimony halide enantiomers showcase highly sensitive stimuli-responsive luminescent behaviours towards excitation wavelength and temperature simultaneously, exhibiting a versatile reversible colour switching capability from blue to white and further to orange. In situ temperature-dependent luminescence spectra, time-resolved luminescence spectra and theoretical calculations reveal that the multi-stimuli-responsive luminescent behaviours stem from distinct STEs within zero-dimensional lattices. By virtue of the inherent flexibility and adaptability, these chiral antimony chlorides have promising prospects for future applications in cutting-edge fields such as multifunctional illumination technologies and intelligent sensing devices.

In Situ Fabrication of Photoluminescent Hydrogen-Bonded Organic Framework-Functionalized Ca (II) Hydrogel Film for the Tetracyclines Visual Sensor and Information Security

A facilely in situ fabricated hydrogen-bonded organic framework (HOF) hydrogel film with perfect photoluminescent performance was designed for visual sensing of tetracycline antibiotics (TCs) and information security. Luminescent HOF (MA-IPA) was combined with sodium alginate (SA) through hydrogen bonding actions and electrostatic interactions, then cross-linked with Ca2+ ions to form HOF hydrogel film (Ca@MA-IPA@SA). The HOF hydrogel film exhibited exceptional mechanical robustness along with stable blue fluorescence and ultralong green phosphorescence. After exposure to TCs, Ca2+ was combined with TCs to generate a new green fluorescence exciplex (TC-Ca2+) in hydrogel films. Due to fluorescence resonance energy transfer, the fluorescence of MA-IPA was quenched, and the fluorescent color of the HOF hydrogel film was changed from blue to green. This dichromatic fluorescent response is convenient for the visual and rapid detection of TCs. The detection limits of tetracycline (TC), oxytetracycline (OTC), and chlortetracycline (CTC) were 5.1, 7.7, and 32.7 ng mL-1, respectively. Importantly, this hydrogel sensing platform was free of tedious operation and enabled the ultrasensitive and selective detection of TCs within 6 min. It has been successfully applied to TC detection in pork and milk samples. Based on the stable photoluminescence performance of HOF hydrogel films and fluorescent-responsive properties to TCs, two types of anticounterfeiting arrays were fabricated for information encryption and decryption. This work provides a novel approach for on-site detection of TCs and offers valuable insights into information security.

Ultra-Sensitive Portable Visual Paper-Based Viral Molecularly Imprinted Sensor without Autofluorescence Interference

Detection of the virus is the primary factor to discover and block the occurrence and development of the virus epidemic. Here, an ultrasensitive paper-based virus molecular imprinting sensor is developed to detect two viruses simultaneously in which the detection limit of the influenza virus (H5N1) is 16.0 aM (9.63 × 103 particles/mL) while that of the Hepatitis B Virus (HBV) is 129 fM (7.77 × 107 particles/mL). This paper-based sensor is low cost and is easy to cut, store, and carry. In addition, the visual semiquantitative detection of two viruses is achieved by using two aptamer-functionalized persistent luminescent nanoparticles as signal probes. These probes and the imprinted cavities on the paper-based material formed sandwich-type double recognition of the target viruses. This sensor has extremely high sensitivity to the H5N1 virus, which is of great value to solve the influenza epidemic with the most outbreaks in history, and also opens up a new way for the prevention and control of other virus epidemics. This cheap and portable visual sensor provides the possibility for self-service detection and can greatly reduce the pressure on medical staff and reduce the risk of virus infection caused by the concentration of people to be tested.

Prolonged Red Persistent Luminescence in Bi3+ Single-Doped LiGa5O8: Regulating Traps by Site Selective Occupation

Persistent luminescence (PersL) materials with impressive superiorities in optical performance have shown tremendous potential for information encryption application. Herein, a Bi3+-doped LiGa5O8 PersL material is facilely synthesized by a simple solid-state reaction. Site selective and preferential occupation of Bi3+ ions at distinct Ga3+ and Li+ polyhedra sites in LiGa5O8 endows it with a bimodal emission at 511 and 718 nm upon UV excitation at 254 nm. After removing the light source, an intense red afterglow was observed due to the generation of more and deeper traps classified as the oxygen vacancy defect (VO••) and the impurity defect (BiLi••). It is rarely reported in inorganic phosphors to achieve the Bi3+ single doping-activated red PersL. The LiGa5O8:x% Bi3+ (with x = 0.5-5.0) samples also exhibit tunable PL and time-dependent PersL properties. Combined with the Morse Code, a multiple information encryption model based on the abnormal optical properties of LiGa5O8:x% Bi3+ (x = 0, 0.5, and 5.0) samples was designed for high-level dynamic anticounterfeiting. These achievements further validate the use of the Bi3+ single doping strategy to explore excellent PersL materials and expand their multifunctional optical applications.

Recent advances in the design of afterglow materials: mechanisms, structural regulation strategies and applications

Afterglow materials are attracting widespread attention owing to their distinctive and long-lived optical emission properties which create exciting opportunities in various fields. Recent research has led to the discovery of many new afterglow materials featuring high photoluminescence quantum yields (PLQY) and lifetimes of up to several hours under ambient conditions. Afterglow materials are typically categorized according to their luminescence mechanism, such as long-persistent luminescence (LPL), room temperature phosphorescence (RTP), or thermally activated delayed fluorescence (TADF). Through rational design and novel synthetic strategies to modulate spin-orbit coupling (SOC) and populate triplet exciton states (T1), luminophores with long lifetimes and bright afterglow characteristics can be realized. Initial research towards afterglow materials focused mainly on pure inorganic materials, many of which possessed inherent disadvantages such as metal toxicity or low energy emissions. In recent years, organic-inorganic hybrid afterglow materials (OIHAMs) have been developed with high PLQY and long lifetimes. These hybrid materials exploit the tunable structure and easy processing of organic molecules, as well as enhanced SOC and intersystem crossing (ISC) processes involving heavy atom dopants, to achieve excellent afterglow performance. In this review, we begin by briefly discussing the structure and composition of inorganic and organic-inorganic hybrid afterglow materials, including strategies for regulating their lifetime, PLQY and luminescence wavelength. The specific advantages of organic-inorganic hybrid afterglow materials, including low manufacturing costs, diverse molecular/electronic structures, tunable structures and optical properties, and compatibility with a variety of substrates, are emphasized. Subsequently, we discuss in detail the fundamental mechanisms used by afterglow materials, their classification, design principles, and end applications (including sensing, anticounterfeiting, and photoelectric devices, among others). Finally, existing challenges and promising future directions are discussed, laying a platform for the design of afterglow materials for specific applications.

Noninvasive Imaging of Tumor Glycolysis and Chemotherapeutic Resistance via De Novo Design of Molecular Afterglow Scaffold

Chemotherapeutic resistance poses a significant challenge in cancer treatment, resulting in the reduced efficacy of standard chemotherapeutic agents. Abnormal metabolism, particularly increased anaerobic glycolysis, has been identified as a major contributing factor to chemotherapeutic resistance. To address this issue, noninvasive imaging techniques capable of visualizing tumor glycolysis are crucial. However, the currently available methods (such as PET, MRI, and fluorescence) possess limitations in terms of sensitivity, safety, dynamic imaging capability, and autofluorescence. Here, we present the de novo design of a unique afterglow molecular scaffold based on hemicyanine and rhodamine dyes, which holds promise for low-background optical imaging. In contrast to previous designs, this scaffold exhibits responsive "OFF-ON" afterglow signals through spirocyclization, thus enabling simultaneous control of photodynamic effects and luminescence efficacy. This leads to a larger dynamic range, broader detection range, higher signal enhancement ratio, and higher sensitivity. Furthermore, the integration of multiple functionalities simplifies probe design, eliminates the need for spectral overlap, and enhances reliability. Moreover, we have expanded the applications of this afterglow molecular scaffold by developing various probes for different molecular targets. Notably, we developed a water-soluble pH-responsive afterglow nanoprobe for visualizing glycolysis in living mice. This nanoprobe monitors the effects of glycolytic inhibitors or oxidative phosphorylation inhibitors on tumor glycolysis, providing a valuable tool for evaluating the tumor cell sensitivity to these inhibitors. Therefore, the new afterglow molecular scaffold presents a promising approach for understanding tumor metabolism, monitoring chemotherapeutic resistance, and guiding precision medicine in the future.

Intense Hydrochromic Photon Upconversion from Lead-Free 0D Metal Halides For Water Detection and Information Encryption

Hydrochromic materials that change their luminescence color upon exposure to moisture have attracted considerable attention owing to their applications in sensing and information encryption. However, the existing materials lack high hydrochromic response and color tunability. This study reports the development of a new and bright 0D Cs3 GdCl6 metal halide as the host for hydrochromic photon upconversion in the form of polycrystals (PCs) and nanocrystals. Lanthanides co-doped cesium gadolinium chloride metal halides exhibit upconversion luminescence (UCL) in the visible-infrared region upon 980 nm laser excitation. In particular, PCs co-doped with Yb3+ and Er3+ exhibit hydrochromic UCL color change from green to red. These hydrochromic properties are quantitatively confirmed through the sensitive detection of water in tetrahydrofuran solvent via UCL color changes. This water-sensing probe exhibits excellent repeatability and is particularly suitable for real-time and long-term water monitoring. Furthermore, the hydrochromic UCL property is exploited for stimuli-responsive information encryption via cyphertexts. These findings will pave the way for the development of new hydrochromic upconverting materials for emerging applications, such as noncontact sensors, anti-counterfeiting, and information encryption.

Exogenous interference and autofluorescence-free ratiometric aptasensor for detection of OTA based on dual-colored persistent luminescence nanoparticles

Accurate and sensitive detection of ochratoxin A (OTA) is highly necessary due to its high carcinogenicity, teratogenicity and mutagenicity. Herein, we reported an exogenous interference and autofluorescence-free ratiometric aptasensor based on dual-colored persistent luminescent nanoparticles for precise detection of OTA. Green-emitting ZnGeO:Mn bonded with OTA aptamer and BHQ1-modified complementary base was acted as detection and specific recognition probe (ZGM@BHQ1). Quaternary ammonium modified ZnGaGeO:Cr with red emission was employed as reference probe and further bonded to ZGM@BHQ1 through electrostatic interaction to construct the ratiometric aptasensor. The developed ratiometric aptasensor was free from real-time excitation, external interference and autofluorescence and gave low detection limit of 3.4 pg mL^-1, wide linearity in the range of 0.01-50 ng mL^-1 and high precision of 3.1 % (11 replicate determinations, at 1 ng mL^-1 level). The applicability of the aptasensor was successfully demonstrated by analyzing OTA in in grain samples with recoveries of 97.6 %-105.2 %.

Recent advances in the anti-counterfeiting applications of long persistent phosphors

Counterfeit products have infiltrated numerous regions worldwide, causing substantial damage to the financial interests of individuals, businesses, and countries. Moreover, counterfeit goods can pose a severe risk to human health. Therefore, it is crucial to develop effective anti-counterfeiting methods and authentication technologies. Persistent luminescence (PersL) materials show great potential for anti-counterfeiting applications due to their distinctive spatial and temporal dynamic spectrum performance. The unique luminescence properties of PersL materials enable the creation of optical codes with high capacity. In this perspective, we provide a summary of the latest advancements in anti-counterfeiting technology using long persistent phosphors. We discuss the various construction strategies of optical codes for anti-counterfeiting, which include multicolor luminescence, orthogonal luminescence, dynamic luminescence, and stimulus-response luminescence. In addition, we explore the mechanisms of PersL-based anti-counterfeiting materials and consider potential areas for future development to expand the applications of persistent phosphors.

Photoresponsive Diarylethene-Containing Polymers: Recent Advances and Future Challenges

Photoresponsive polymers have attracted increasing interest owing to their potential applications in anticounterfeiting, information encryption, adhesives, etc. Among them, diarylethene (DAE)-containing polymers are one of the most promising photoresponsive polymers and have unique thermal stability and fatigue resistance compared to azobenzene- and spiropyran-containing polymers. Herein, the design of DAE-containing polymers based on different types of structures, including main chain polymers, side-chain polymers, and crosslinked polymers, is introduced. The mechanism and applications of DAE-containing polymers in anti-counterfeiting, information encryption, light-controllable adhesives, and photoinduced healable materials are reviewed. In addition, the remaining challenges of DAE-containing polymers are also discussed.

Modulating Emission of Boric Acid into Highly Efficient and Color-Tunable Afterglow via Dehydration-Induced Through-Space Conjugation

Inorganic boric acid (BA) is generally not considered an efficient afterglow material, and several groups have reported its extremely weak room-temperature phosphorescence (RTP) in the blue spectral region. It is discovered that heat treatment of BA results in increased afterglow intensity (27-fold increase) and prolonged emission lifetime (from 0.83 to 1.59 s), attributed to enhanced through-space conjugation (TSC) of BA. The afterglow intensity of BA can be increased further (≈415 folds) by introducing p-hydroxybenzoic acid (PHA), which contains a conjugated molecular motif, to further promote the TSC of the BA system. This combination results in the production of afterglow materials with a photoluminescence quantum yield of 83.8% and an emission lifetime of 2.01 s. In addition, a tunable multicolor afterglow in the 420-490 nm range is achieved owing to the enhancement of the RTP and thermally activated delayed fluorescence of PHA, where BA exerts a confinement effect on the guest molecules. Thus, this study demonstrates promising afterglow materials produced from extremely abundant and simple precursor materials for various applications.

Competitive ELISA based on pH-responsive persistent luminescence nanoparticles for autofluorescence-free biosensor determination of ochratoxin A in cereals

An accurate and sensitive competitive enzyme-linked immunosorbent assay (ELISA) based on persistent luminescence nanoparticles Zn₂GeO₄:Mn²⁺, Eu³⁺ (ZGME) was developed for detecting ochratoxin A (OTA), a powerfully toxic mycotoxin usually found in grains. As a signal output element of autofluorescence-free biosensors, ZGME can be integrated into ELISA with glucose oxidase (GOx)-binding OTA molecules due to its excellent pH-responsive persistent luminescence. In the absence of OTA, the OTA-GOx conjugate was captured by the anti-OTA monoclonal antibody (anti-OTA mAb) pre-coated on the 96-well plate. The results indicate a decrease in the pH value of the solution, which triggered the quenching of ZGME luminescence due to GOx-dependent gluconic acid production. The presence of OTA inhibited the binding of OTA-GOx on the plate, thus decreasing the production of gluconic acid and increasing the persistent luminous intensity of ZGME. Under the optimized concentrations of anti-OTA mAb and OTA-GOx, quantitative determination of OTA was achieved by plotting the increase or decrease in persistent luminescence intensity of ZGME at 535 nm. In this study, the linear range was from 0.1 μg L^-1 to 63 μg L^-1, and the limit of detection (LOD) was as low as 0.045 μg L^-1. In five food samples (corn grit, brown rice, soybean, rice, and wheat), the results exhibited good stability and repeatability, with a recovery range from 81.3% to 94.4% and a relative standard deviation (RSD) of less than 4.2%. Hence, the established method provides a sensitive, accurate, and autofluorescence-free approach for the determination of OTA in different grain samples.

Perspective and Prospects on persistent luminescent nanoparticles for biological imaging and tumor therapy

Persistent luminescent nanoparticles (PLNPs) are photoluminescent materials that can still emit luminescence after the cessation of the excitation light source. In recent years, due to their unique optical properties, the PLNPs have attracted extensive attention in the biomedical field. Since the PLNPs effectively eliminate autofluorescence interference from biological tissues, many researchers have contributed a lot of work in the fields of biological imaging and tumor therapy. This article mainly introduces the synthesis methods of the PLNPs and their progress in the application of biological imaging and tumor therapy, as well as the challenges and development prospects.

Recent advances in room temperature phosphorescence materials: design strategies, internal mechanisms and intelligent optical applications

Room temperature phosphorescence (RTP) materials comprising organic-inorganic hybrid, pure organic, and polymer RTP materials have been a research focus due to their tunable molecular structures, long emission lifetimes and extensive optical applications. Many design methods including halogen bonding interactions, heavy atom effect, metal-organic frameworks, polymerization, host-guest doping, and H-aggregation have been developed by RTP researchers. Narrowing the energy gap between the S₁ and lowest T_n states, enhancing the intersystem crossing (ISC) rate, increasing the spin-orbit coupling (SOC) value and stabilizing triplet emission states are the core factors to promoting RTP performance. In this review, lots of cases of organic-inorganic hybrid, pure organic, and polymer RTP materials with advanced design strategies, excellent RTP properties and intelligent applications have been classified and sorted. Their molecule structural designability and stimulus responsiveness endow them with RTP adjustability, which makes them excellent phosphors for modern optical applications. This review provides a systematic case elaboration of typical RTP systems in recent years and identifies the future challenges to improving RTP performance and finding novel applications.

"Three-in-one" Zr-MOF Multifunctional Carrier-mediated Fluorescent and Colorimetric Dual-signal Readout Biosensing Platform to Enhance Analytical Performance

To address the urgent demand for sensitive and stable detection applications, significant efforts have been made in the development of dual-signal readout assays for precise target detection and timely health risk control. Here, a new nanomaterial, Pt@PCN-224-HRP-initiator DNA (PP-HRP-iDNA), was exploited to construct a dual-signal readout biosensing platform. Zr-MOF (PCN-224) was loaded with as many Pt nanoparticles (NPs) and as much horseradish peroxidase (HRP) as possible to enhance the brightness of the colorimetric signal recognizable to the naked eye while also acting as a gatekeeper to protect the enzyme activity and ensuring the stability of the assay process. Moreover, the Pt NPs and HRP displayed a synergistic catalytic effect, which promoted the sensitivity of detection. Further, the formation of the Zr-O-P bond eliminated the instability of the interactions between PCN-224 and iDNA in a controllable manner. After the immunoreaction, iDNA stimulated a hybridization chain reaction, resulting in a significant reduction of the fluorescent DNA in the supernatant and a fluorescent signal change. Subsequently, the PP-HRP-iDNA probe implemented UV-light response (450 nm) where 3,3',5,5'-tetramethylbenzidine was used as a substrate for the colorimetric signal readout. By virtue of the nanomaterial-modulated transduction mechanism and the antigen-antibody interactions, this dual-signal biosensor displays high sensitivity, with a limit of detection of 0.65 pg/mL for aflatoxin B₁ and 4 CFU/mL for Salmonella enteritidis, suggesting the detection potential of the biosensing platform for analyzing various targets.

Non-autofluorescence Detection of H5N1 Virus Using Photochemical Aptamer Sensors Based on Persistent Luminescent Nanoparticles

Fluorescence sensing is limited in practical applications owing to multiple autofluorescent substances in complex biological samples such as serum. In this paper, the luminescence decay effect of persistent luminescent nanoparticles (PLNPs) was used to avoid the interference of autofluorescence in complex biological samples, and a non-autofluorescence molecularly imprinted polymer aptamer sensor (MIP-aptasensor) was designed to detect H5N1 virus. The proposed MIP-aptasensor consists of a magnetic MIP and aptamer-functionalized persistent luminescent nanoparticle Zn₂GeO₄:Mn²⁺-H5N1 aptamer (ZGO-H5N1 Apt). Upon simultaneous recognition of H5N1 virus, strong persistent luminescent signal changes were produced. Using the unique luminescent characteristics of PLNPs and the high selectivity of imprinted polymers and aptamers, the designed MIP-aptasensor effectively eliminates the autofluorescence background interference of serum samples and realizes the non-autofluorescence detection of H5N1 virus with high sensitivity (a limit of detection of 0.0128 HAU mL^-1, 1.16 fM) and selectivity (the imprinting factor for the target H5N1 virus was 6.72). This tool provides a strategy for the design of sensors and their application in complex biological samples.

Metallacycle-cored fluorescent supramolecular polymer networks for the detection of acidic environments

Despite the challenges, supramolecular polymers (SPs) have received significant attention. In this study, pH-responsive fluorescent SPs were prepared by a bottom-up strategy. The rhombohedral metallacycle-cored supramolecular coordination complex (SCC) was first prepared by metal-ligand coordination between the 120° pyridinedione boron difluoride and the 60° crown ether-based platinum, which then interacted with ammonium salt-containing covalent polymers to form SP networks. These networks can potentially be used for the detection of organic acid solutions and inorganic acid vapours.

Designing X-ray-Excited UVC Persistent Luminescent Material via Band Gap Engineering and Its Application to Anti-Counterfeiting and Information Encryption

Persistent luminescent materials (PLMs) are promising candidates for the anti-counterfeiting and information encryption field. However, ultraviolet (UV) excitation and visible emission are partially responsible for enabling information that has been encrypted to combat counterfeiting to be accessed by trial and error, resulting in imitation and information leakage. Here, we propose the possibility of controlling the persistent luminescent (PersL) emission spectra and its excitation light source with the use of band gap engineering, while obtaining X-ray exciting, not UV exciting UV PLM for advanced anti-counterfeiting and encryption application. Cationic substitution was used to adjust the width of the band gap of Lu(X)O₄ (X = V, Nb, Ta, and P) from ∼4 to 9 eV. In addition, Bi³⁺ was introduced into the host as an emitter, which enabled the PersL emission spectra to be modulated from ∼550 to 230 nm. Among these PLMs, LuPO₄:Bi³⁺ has unique optical properties. Under UV excitation, LuPO₄:Bi³⁺ exhibits weak, inconspicuous visible down-conversion luminescence (DCL), without PersL ceasing once excitation is discontinued. Interestingly, LuPO₄:Bi³⁺ displays UV PersL after X-ray excitation, and human eyes are insensitive to UV PersL, which requires specialized optical equipment to detect. A proof-of-concept assessment of LuPO₄:Bi³⁺ for anti-counterfeiting and information encryption applications demonstrated its suitability in this regard.

Recent advances in redox-responsive nanoparticles for combined cancer therapy

The combination of multiple therapeutic modalities has attracted increasing attention as it can achieve better therapeutic effects through different treatment mechanisms. However, traditional small molecule agents are non-specific to the tumor tissue, which leads to off-target toxic effects for healthy tissues. To solve this problem, a number of stimuli-responsive nanoscale drug-delivery systems have been developed. Among these stimuli, a high concentration of reactive oxygen species (ROS) and glutathione (GSH) are characteristic of the tumor microenvironment (TME), which can distinguish it from normal tissue. In this review, we summarize the redox-responsive nanoparticles (NPs) reported in the past three years classified by different functional groups, including GSH-responsive disulfide, ditelluride, and multivalent metal ions, ROS-responsive thioketal, arylboronic ester, aminoacrylate, and bilirubin as well as GSH/ROS dual-responsive diselenide and dicarbonyl thioethers. The prospects and challenges of redox-responsive NPs are also discussed.

Functional Nanoparticles for Enhanced Cancer Therapy

Cancer is the leading cause of death in people worldwide. The conventional therapeutic approach is mainly based on chemotherapy, which has a series of side effects. Compared with traditional chemotherapy drugs, nanoparticle-based delivery of anti-cancer drugs possesses a few attractive features. The application of nanotechnology in an interdisciplinary manner in the biomedical field has led to functional nanoparticles achieving much progress in cancer therapy. Nanoparticles have been involved in the diagnosis and targeted and personalized treatment of cancer. For example, different nano-drug strategies, including endogenous and exogenous stimuli-responsive, surface conjugation, and macromolecular encapsulation for nano-drug systems, have successfully prevented tumor procession. The future for functional nanoparticles is bright and promising due to the fast development of nanotechnology. However, there are still some challenges and limitations that need to be considered. Based on the above contents, the present article analyzes the progress in developing functional nanoparticles in cancer therapy. Research gaps and promising strategies for the clinical application are discussed.

Persistent Production of Reactive Oxygen Species with Zn2GeO4:Cu Nanorod-Loaded Microneedles for Methicillin-Resistant Staphylococcus Aureus Infectious Wound Healing

Skin wound infection caused by methicillin-resistant Staphylococcus aureus (MRSA) is an urgent concern. Photodynamic therapy has emerged as a promising means of combating bacterial infection. However, continuous or repeated in situ light excitation is required for photosensitizers to produce reactive oxygen species (ROS), and most photosensitizers need sufficient oxygen to produce singlet oxygen (¹O₂), which greatly limits their clinical application. In this work, we report the preparation of Zn₂GeO₄:Cu²⁺ (ZGC) persistent luminescence nanorods with excellent ability for persistent ROS production after stopping excitation for MRSA infectious wound healing. The prepared ZGC nanorods were loaded into dissolvable microneedles (MNs) (ZGC@MNs) to penetrate biofilms and treat MRSA-infected wounds in a minimally invasive manner. ZGC showed a long-persistent photocatalytic effect to constantly produce multiple ROS (¹O₂, hydroxyl radical, and superoxide radical) accompanied by persistent luminescence after a pre-illumination. The MN tips of ZGC@MNs were rapidly dissolved to release ZGC for the continuous production of multiple ROS for at least 48 h with no need for in situ excitation and no special requirement on the amount of oxygen for eliminating MRSA biofilms. The developed ZGC@MN patches exhibited excellent antibacterial activity and biocompatibility for effectively reducing inflammation and promoting wound healing in vivo.

"Three-in-One" Multifunctional Nanohybrids with Colorimetric Magnetic Catalytic Activities to Enhance Immunochromatographic Diagnosis

Colorimetric lateral flow immunoassay (LFIA) with gold nanoparticles (AuNPs) as signal reporters has been widely used in point-of-care testing. Nonetheless, the potential of traditional AuNP-based LFIA for the early diagnosis of disease is often compromised by limited sensitivity due to the insufficient colorimetric signal brightness of AuNPs. Herein, we develop a "three-in-one" multifunctional catalytic colorimetric nanohybrid (Fe₃O₄@MOF@Pt) composed of Fe₃O₄ nanoparticles, MIL-100(Fe), and platinum (Pt) nanoparticles. Fe₃O₄@MOF@Pt displays enhanced colorimetric signal brightness, fast magnetic response, and ultrahigh peroxidase-mimicking activity, which are beneficial to the enhancement of the sensitivity of LFIA by coupling with magnetic separation and catalytic amplification. When integrated with the dual-antibody sandwich LFIA platform, the developed Fe₃O₄@MOF@Pt can achieve an ultrasensitive immunochromatographic assay of procalcitonin with a sensitivity of 0.5 pg mL^-1, which is approximately 2280-fold higher than that of conventional AuNP-based LFIA and superior to previously published immunoassays. Therefore, this work suggests that the proposed catalytic colorimetric nanohybrid can act as promising signal reporters to enable ultrasensitive immunochromatographic disease diagnostics.

Solution-Grown Chloride Perovskite Crystal of Red Afterglow

We report the growth of a halide-based double perovskite, Cs₂ Na_x Ag_1-x InCl₆ :y%Mn, via a facile hydrothermal reaction at 180 °C. Through a co-doping strategy of both Na⁺ and Mn²⁺ , the as-prepared crystals exhibited a red afterglow featuring a high color purity (ca. 100 %) and a long duration time (>5400 s), three orders of magnitude longer than those solution-processed organic afterglow crystals. The energy transfer (ET) process between self-trapped excitons (STE) and activators was investigated through time-resolved spectroscopy, which suggested an ET efficiency up to 41 %. Importantly, the nominal concentration of dopants, especially in the case of Na⁺ , was found a useful tool to control both energy level and number distribution of traps. Cryogenic afterglow measurements suggested that the afterglow phenomenon was likely governed by thermal-activated exciton diffusion and electron tunneling process.

Tetraphenylethene Functionalized Polyhedral Oligomeric Silsesquioxane Fluorescent Probe for Rapid and Selective Trifluralin Sensing in Vegetables and Fruits

A novel fluorescent probe was designed and synthesized from tetraphenylethene (TPE) and polyhedral oligomeric silsesquioxanes (POSS) via Heck-palladium catalyzed cross-coupling reaction. The as-synthesized TPE functionalized probe performed good solvent stability and selectively preconcentration capability towards target analyte due to its stable structure and the adsorption property. The morphology as well as the physical and chemical properties of the POSS@TPE were carefully characterized. The POSS@TPE was employed to develop an effective fluorescent probe for trifluralin, with a response range of 0.1-80 mg/kg and a detection limit of 0.102 mg/kg. The mixed mechanisms of inner-filter effect (IFE) and photoinduced electron transfer (PET) explain the selectivity of POSS@TPE. Rapid detection for trifluralin in tomato and celery has been achieved with recoveries between 99.4-120.7% (RSD≤3.4%), and the results were verified compared with GC-MS method.

Hydrothermal Synthesis of Zinc-Doped Silica Nanospheres Simultaneously Featuring Stable Fluorescence and Long-Lived Room-Temperature Phosphorescence

Fluorescence and phosphorescence are known as two kinds of fundamental optical signals, which have been used for myriad applications. To date, simultaneous activation of stable fluorescence and long-lived room-temperature phosphorescence (RTP) emission in the aqueous phase remains a big challenge. We prepare zinc-doped silica nanospheres (Zn@SiNSs) with fluorescence and RTP properties using a facile hydrothermal synthetic strategy. For the as-prepared Zn@SiNSs, the recombination of electrons and holes in defects and defect-stabilized excitons derived from oxygen vacancy/C=N bonds lead to the production of stable fluorescence and long-lived RTP (emission lasting for ≈9 s, quantum yield (QY): ≈33.6 %, RTP lifetime: ≈236 ms). The internal Si-O bonded networks and hydrophilic surface in Zn@SiNSs can reduce nonradiative decay to form self-protective RTP, and also provide high water solubility, excellent pH- and photostability.

Persistent luminescence nanorods-based autofluorescence-free biosensor for prostate-specific antigen detection

Persistent luminescent nanoparticles (PLNPs) are a class of materials with excellent optical properties, which can continue to emit light for a long time after removing the excitation light source. This feature enables PLNPs to be used for development of biological detection modes without autofluorescence background. In this study, we prepared Zn₂GeO₄: Mn²⁺, Pr³⁺ (ZGOMP) nanorods through a one-pot hydrothermal method. Using the pH-responsive luminescence behavior of ZGOMP, we developed an autofluorescence-free biosensor using ZGOMP as a probe and gluconic acid as a quencher to detect prostate-specific antigen (PSA). Hybridization chain reaction (HCR) and magnetic separation system were introduced in the design to achieve efficient signal amplification. Under the optimal conditions, the as-designed autofluorescence-free sensing platform showed high selectivity, and showed a good luminescence response to PSA within the linear range of 0.001-10 ng/mL at a detection limit of 0.64 pg/mL. The excellent analytical performance shows that the current strategy provides an effective platform for clinical sample analysis.