Energy Platform for Directed Charge Transfer in the Cascade Z-Scheme Heterojunction: CO2 Photoreduction without a Cocatalyst

Construction of 2D/2D α-Fe2O3/g-C3N4 Z-scheme photocatalysts with SnO2 as an energy platform for directed charge transfer in cascade heterojunction: Photocatalytic CO2 reduction and pollutant degradation

Developing an efficient visible-light-driven photocatalysts for conversion of atmospheric CO2 into valuable fuels is a promising strategy to mitigate the escalating greenhouse gas, environmental, and energy crisis. This study presents an innovative design for a cascade Z-scheme comprising of dimensional matched SnO2-α-Fe2O3/g-C3N4 (SO-FO/CN) nanosheets heterojunction. In this configuration, SnO2 functions as an optimal energy platform that not only facilitates charge transfer and separation but also sustains sufficient thermodynamic energy for redox reactions and inhibits the undesired type-II charge transfer pathway. The optimized cascade Z-scheme exhibits a remarkable 20-fold improved photoactivity for CO2 conversion to CH4 and CO compared to bare g-C3N4 (CN). It also shows significantly improved photocatalytic activity for the degradation of toxic organic pollutants, 2,4-dichlorophenol (2,4-DCP) ∼6.6-fold and bisphenol A (BPA) ∼4.2-fold, respectively. The improved photocatalytic activity results from effective charge separation facilitated by the Z-scheme, along with a favorable energy platform and extended charge lifetime. This innovative strategy, which utilize an energy platform, presents a promising approach for designing an efficient Z-scheme heterojunction photocatalysts for solar-to-fuel conversion and pollutant degradation.

Double heterojunction photocatalysts: strategic fabrication and mechanistic insights towards sustainable fuel production

Excessive energy crisis has triggered the transformation of solar energy into chemical energy via photocatalysis to establish a sustainable and carbon-neutral society. In this regard, the fabrication of visible-light-active photocatalysts with favourable band edge positions is preferred for achieving maximum solar energy conversion efficiency. However, a single semiconductor suffers from several disadvantages, such as rapid electron-hole recombination, inefficient electron-hole separation and sluggish charge migration dynamics. To improve photocatalytic performance, constructing heterostructures using two semiconductors has been considered an effective strategy. Nonetheless, these binary heterostructures also present several challenges, which can be addressed by combining three semiconductors to form double heterojunctions. The formation of double heterojunctions enhances visible light absorption, increases charge carrier concentration and facilitates superior charge separation owing to the presence of in-built electric fields, thereby ameliorating the photocatalytic efficacy of these heterostructures compared to binary ones. This review article provides a deep insight into the charge transfer mechanisms that occur in different types of double heterojunctions. Moreover, it highlights the applications of these heterostructures in various fields of photocatalysis, such as water splitting, CO2 reduction, N2 fixation and pollutant degradation.

Photocatalytic Reduction of Carbon Dioxide: Designing the Active Sites and Tracking the Pathways

Photocatalytic reduction of carbon dioxide (CO2) realizes the recycling of carbon emissions and storage of solar energy into the bonding of organics at the same time, and thus attract great interest in the field of energy and environment. However, the current photocatalytic performance of CO2 reduction cannot match the industrial application. The design of highly efficient photocatalysts with precise selectivity and reliable long-term stability is still a big challenge, partially because the mechanism of photocatalytic CO2 reduction to guide the design and fabrication, is not completely clear yet. The reduction can involve at most eight electrons for each CO2 molecule, during which several pathways might be opened up at the active sites to consume photocarriers to influence the selectivity and stability. The reduction pathways are dependent on the electronic structure and property of active sites, and the photocatalytic performance can be optimized if those pathways are thermodynamically or kinetically compatible for the target production. This review will summarize the strategy for designing the active sites on the surface of photocatalysts and the investigation on the relation between the active sites and pathways for photocatalytic CO2 reduction, looking ahead at the future development of the photocatalysts and devices for CO2 reduction.

Quantum Well Superlattice Heteronanostructures for Efficient Photocatalytic Hydrogen Evolution

In this study, we construct a quantum well effect-based two-dimensional Z-scheme superlattice heteronanostructure photocatalyst constructed from hydrogen-bonded porphyrin organic frameworks (HOFs) and carbon nitride. Porphyrin HOFs extend spectral absorption, while their π-conjugation and electron density variations significantly enhance charge separation and exhibit favorable alignment with the energy levels of carbon nitride, thereby enabling efficient charge transfer. Carboxylic acid channels in the HOFs further promote the decomposition of water molecules, thereby boosting hydrogen production. Experimental results indicate an improvement in carrier separation efficiency from 6.97 to 50.31%, resulting in a 935-fold increase in the hydrogen evolution rate of 187.2 mmol/g/h. Such a rate represents the highest performance among the currently reported porphyrin-based and carbon-based photocatalysts. This work highlights the potential of quantum well-based heterostructure design in optimizing photocarrier dynamics, providing a promising strategy for advancing photocatalytic hydrogen evolution.

Enhanced Azo Dye Removal through Sequential Ultrasound-Assisted-Treatment and Photocatalysis Using CdZnS

The treatment of high-concentration azo dyes remains challenging due to the inherent limitations of conventional single-mode approaches. Here, we propose an integrated strategy that sequentially combines ultrasound-assisted adsorption with photocatalysis using CdZnS solid solutions to efficiently and rapidly remove high-concentration azo dyes. CdZnS exhibits high adsorption capacity and exceptional photocatalytic activity, enabling initial dye capture and enrichment, followed by significantly enhanced photocatalytic degradation. The adsorption of Congo Red (CR) on CdZnS solid solutions follows the Freundlich and pseudo-second-order models, demonstrating a multilayer adsorption behavior involving physical and chemical interactions. Ultrasound assistance during the first stage not only significantly reduces equilibrium time, but also results in enhanced negative charges in CdZnS that extend to the subsequent photocatalysis stage. This charge enhancement substantially improves CR photodegradation performance, establishing synergistic interactions between ultrasonic treatment and photodegradation. The system demonstrates excellent performance in treating both concentrated single dyes and complex dye mixtures, maintaining high efficiency over multiple treatment cycles. This integrated approach provides new insights for developing more effective technologies for dye degradation and practical wastewater treatment applications.

Donor-Acceptor Type Carbon Nitride Photocatalysts in Photocatalysis: Current Understanding, Applications and Challenges

The exploration of photocatalytic materials with efficient charge separation has always been a prominent area of research in photocatalysis. In the preceding years, the strategy of constructing donor-acceptor (D-A) structured materials has gradually been developed in photocatalytic systems, becoming a new research crossroads and attracting extensive interdisciplinary focus. Polymeric carbon nitride (PCN) has gradually been recognized as the primary photocatalytic material for constructing D-A structures due to its attractive exceptional physicochemical stability, electronic band structure, and cost-effectiveness. However, few reports have summarized the research on D-A type PCN at the molecular level. This review focuses on the molecular level design strategies and the performance enhancement mechanisms of D-A type PCN are emphasized from two main aspects: intramolecular D-A and intermolecular D-A. In addition, the concept of dual D-A type PCN is introduced, proposing a new direction for advancing the efficacy of photocatalysts. Subsequently, this review summarizes the application scenarios of D-A type PCN in energy transformation and environmental amelioration. Finally, by elaborating on the main difficulties and opportunities in this hot field, this review can provide inspiration and innovative strategies for developing D-A type PCN and resolving energy and environmental issues.

Defects Calculation and Accelerated Interfacial Charge Transfer in a Photoactive MOF-Based Heterojunction

Photocatalytic hydrogen production is currently considered a clean and sustainable route to meet the energy and environmental issues. Among, heterojunction photocatalysts have been developed to improve their photocatalytic efficiency. Defect engineering of heterojunction photocatalysts is attractive due to it can perform as electron trap and change the band structure to optimize the interfacial separation rate of photogenerated electron-hole pairs. Here, the MOF-based heterojunction photocatalysts with theoretically high reduction and oxidation abilities are successfully synthesized, denoted ZrO2/Pt/Zr-MOF-X, with tuned linker defectivity through an in situ electrochemical route. The defectivity are rationally calculated from the TG and 1H NMR results. A positive correlation is found between the defectivity and photocatalytic activity, and ZrO2/Pt/Zr-MOF-6 with the optimized defectivity of ca. 35% exhibits the highest hydrogen production rate of up to 2923 µmol g-1 h-1, illustrating the importance of structural defects in heterojunction photocatalysts. Ultrafast transient absorption spectroscopy and electron spin resonance results unveil the highest carrier concentration and charge separation efficiency in the defected heterostructure of ZrO2/Pt/Zr-MOF-6 through a direct Z-scheme contact, leading to its efficient photocatalysis through the high redox power.

Electrostatic Control of Electronic Structure in Modular Inorganic Crystals

The rules that govern structure and bonding, established for elemental solids and simple compounds, are challenging to apply to more complex crystals formed of polyatomic building blocks, such as layered or framework materials. Whether these modular building blocks are electrically neutral or charged influences the physical properties of the resulting crystal. Despite the prevalence of alternating charged units, their effects on the electronic structure remain unclear. We demonstrate how the distribution of charged building blocks, driven by differences in the electrostatic potential, governs the electronic band energies formed in layered crystals. This coarse-grained model predicts the spatially separated valence and conduction band edges observed in the metal-oxyhalide Ba2Bi3Nb2O11Cl and explains observed property trends in the Sillén-Aurivillius crystal system. Moreover, the general nature of the model allows for extension to other modular structure types, illustrated for Sillén and Ruddlesden-Popper layered compounds, and can support the rational design of electronic properties in diverse materials.

Fabrication of close-contact S-scheme Cr2Bi3O11-Bi2O3/Fe3O4@porous carbon microspheres based on in-situ reaction: Enhanced photo-Fenton wastewater treatment

Low photo-induced carrier recombination rate, exceptional light absorption, and advantageous recycling performance are crucial attributes of semiconductor photocatalyst for wastewater purification. Herein, based on in-situ reaction, close-contact S-scheme bismuth chromate/bismuth oxide/ferroferric oxide@porous carbon microspheres (Cr2Bi3O11-Bi2O3/Fe3O4@PCs) (F-CBFP) was fabricated using alginates as precursor. Due to the abundance of functional groups on the porous carbon (PCs), Bi2O3 and Cr2Bi3O11 nanoparticles (NPs) are in situ deposited onto the highly conductive 3D magnetic porous Fe3O4@PCs microsphere surface, which not only form tight interfacial contacts and reduces interfacial potential barriers but also prevent agglomeration or shedding of the NPs during photocatalytic reactions. Moreover, density functional theory (DFT) calculations further confirm that the formation of a robust built-in electric field (BIEF) within F-CBFP prompts photo-induced electrons in the conduction band (CB) of Bi2O3 to combine with holes in the valence band (VB) of Cr2Bi3O11, effectively constructing a S-scheme heterojunction system. Also, Fe3O4 can act as a Fenton catalyst, activating the H2O2 generated by Cr2Bi3O11 under illumination. In wastewater treatment, the obtained F-CBFP shows remarkable photo-Fenton degradation (towards methyl orange (97.8 %, 60 min) and tetracycline hydrochloride (95.3 %, 100 min)) and disinfection performance (100 % E. coli inactivation), and exceptional cyclic stability.

Z-Scheme Heterojunction of Hierarchical Cu2S/CdIn2S4 Hollow Cubes to Boost Photoelectrochemical Performance

The exaltation of light-harvesting efficiency and the inhibition of fast charge recombination are pivotal to the improvement of photoelectrochemical (PEC) performance. Herein, a direct Z-scheme heterojunction is designed of Cu2S/CdIn2S4 by in situ growth of CdIn2S4 nanosheets on the surface of hollow CuS cubes and then annealing at 400 °C. The constructed Z-scheme heterojunction is demonstrated with electron paramagnetic resonance and redox couple (p-nitrophenol/p-aminophenol) measurements. Under illumination, it shows the photocurrent 6 times larger than that of hollow Cu2S cubes, and affords outstanding PEC performance over the known Cu2S and CdIn2S4-based photocatalysts. X-ray photoelectron spectroscopy and density functional theory results demonstrate a strong internal electric field formed in Cu2S/CdIn2S4 Z-scheme heterojunction, which accelerates the Z-scheme charge migration, thereby promoting electron-hole separation and enhancing their utilization efficiency. Moreover, the hollow structure of Cu2S is conducive to shortening the charge transport distance and improving light-harvesting capability. In proof-of-concept PEC application, a PEC detection method for miRNA-141 based on the sensitivity of benzo-4-chloro-hexadienone to light absorption on Cu2S/CdIn2S4 modified electrode is developed with good selectivity and a limit of detection of 32 aM. This work provides a simple approach for designing photoactive materials with highly efficient PEC performance.

Structurally and surficially activated TiO2 nanomaterials for photochemical reactions

Renewable fuels and environmental remediation are of paramount importance in today's world due to escalating concerns about climate change, pollution, and the finite nature of fossil fuels. Transitioning to sustainable energy sources and addressing environmental pollution has become an urgent necessity. Photocatalysis, particularly harnessing solar energy to drive chemical reactions for environmental remediation and clean fuel production, holds significant promise among emerging technologies. As a benchmark semiconductor in photocatalysis, TiO2 photocatalyst offers an excellent solution for environmental remediation and serves as a key tool in energy conversion and chemical synthesis. Despite its status as the default photocatalyst, TiO2 suffers from drawbacks such as a high recombination rate of charge carriers, low electrical conductivity, and limited absorption in the visible light spectrum. This review provides an in-depth exploration of the fundamental principles of photocatalytic reactions and presents recent advancements in the development of TiO2 photocatalysts. It specifically focuses on strategic approaches aimed at enhancing the performance of TiO2 photocatalysts, including improving visible light absorption for efficient solar energy harvesting, enhancing charge separation and transportation efficiency, and ensuring stability for robust photocatalysis. Additionally, the review delves into the application of photodegradation and photocatalysis, particularly in critical processes such as water splitting, carbon dioxide reduction, nitrogen fixation, hydrogen peroxide generation, and alcohol oxidation. It also highlights the novel use of TiO2 in plastic polymerization and degradation, showcasing its potential for converting plastic waste into valuable chemicals and fuels, thereby offering sustainable waste management solutions. By addressing these essential areas, the review offers valuable insights into the potential of TiO2 photocatalysis for addressing pressing environmental and energy challenges. Furthermore, the review encompasses the application of TiO2 photochromic systems, expanding its scope to include other innovative research and applications. Finally, it addresses the underlying challenges and provides perspectives on the future development of TiO2 photocatalysts. Through addressing these issues and implementing innovative strategies, TiO2 photocatalysis can continue to evolve and play a pivotal role in sustainable energy and environmental applications.

Z-scheme heterojunction enhanced photocatalytic performance for CO2 reduction to CH4

Due to the high charge separation efficiency leading to high photocatalytic activity, there has been significant interest in enhancing the charge separation ability of photocatalysts by controlling the heterojunction structure. To investigate the effect of the heterojunction structure on the photocatalytic performance of composite catalysts and understand its corresponding mechanism, a Z-scheme ZnFe2O4/ZnO/CdS heterojunction was constructed using the ultrasound method and used for CO2 photoreduction. The Z-scheme heterojunction catalyst demonstrates elevated photocatalytic and charge separation efficiencies. Specifically, the conversion rate for the photocatalytic conversion of CO2 to CH4 reaches 105.9 μmol g-1 h-1, surpassing that of the majority of previously reported semiconductor photocatalysts like ZnFe2O4/CdS. This research offers a fresh perspective on the development of innovative heterojunction photocatalysts and broadens the utilization of ternary composite materials in CO2 photoreduction.

Variation of Chemical Microenvironment of Pores in Hydrazone-Linked Covalent Organic Frameworks for Photosynthesis of H2O2

Photocatalytic synthesis of H2O2 is an advantageous and ecologically sustainable alternative to the conventional anthraquinone process. However, achieving high conversion efficiency without sacrificial agents remains a challenge. In this study, two covalent organic frameworks (COF-O and COF-C) were prepared with identical skeletal structures but with their pore walls anchored to different alkyl chains. They were used to investigate the effect of the chemical microenvironment of pores on photocatalytic H2O2 production. Experimental results reveal a change of hydrophilicity in COF-O, leading to suppressed charge recombination, diminished charge transfer resistance, and accelerated interfacial electron transfer. An apparent quantum yield as high as 10.3 % (λ=420 nm) can be achieved with H2O and O2 through oxygen reduction reaction. This is among the highest ever reported for polymer photocatalysts. This study may provide a novel avenue for optimizing photocatalytic activity and selectivity in H2O2 generation.

Modulating the Microenvironments of Robust Metal Hydrogen-Bonded Organic Frameworks for Boosting Photocatalytic Hydrogen Evolution

Hydrogen-bonded organic frameworks (HOFs) are outstanding candidates for photocatalytic hydrogen evolution. However, most of reported HOFs suffer from poor stability and photocatalytic activity in the absence of Pt cocatalyst. Herein, a series of metal HOFs (Co2-HOF-X, X=COOMe, Br, tBu and OMe) have been rationally constructed based on dinuclear cobalt complexes, which exhibit exceptional stability in the presence of strong acid (12 M HCl) and strong base (5 M NaOH) for at least 10 days. More impressively, by varying the -X groups of the dinuclear cobalt complexes, the microenvironment of Co2-HOF-X can be modulated, giving rise to obviously different photocatalytic H2 production rates, following the -X group sequence of -COOMe>-Br>-tBu>-OMe. The optimized Co2-HOF-COOMe shows H2 generation rate up to 12.8 mmol g-1 h-1 in the absence of any additional noble-metal photosensitizers and cocatalysts, which is superior to most reported Pt-assisted photocatalytic systems. Experiments and theoretical calculations reveal that the -X groups grafted on Co2-HOF-X possess different electron-withdrawing ability, thus regulating the electronic structures of Co catalytic centres and proton activation barrier for H2 production, and leading to the distinctly different photocatalytic activity.

A Novel Perspective on Enhancing Photocatalytic Performance through the Synergistic Effect of Nd Single Atoms and Heterostructures

There are few reports on lanthanide single atom modified catalysts, as the role of the 4f levels in photocatalysis is difficult to explain clearly. Here, the synergistic effect of 4f levels of Nd and heterostructures is studied by combining steady-state, transient, and ultrafast spectral analysis techniques with DFT theoretical calculations based on the construction of Nd single atom modified black phosphorus/g-C3N4 (BP/CN) heterojunctions. As expected, the generation rates of CO and CH4 of the optimized heterostructure are 7.44 and 6.85 times higher than those of CN, and 8.43 and 9.65 times higher than those of BP, respectively. The Nd single atoms can not only cause surface reconstruction and regulate the active sites of BP, but also accelerate charge separation and transfer, further suppressing the recombination of electron-hole pairs. The electrons can transfer from g-C3N4:Nd to BP:Nd, with a transfer time of ≈11.4 ps, while the radiation recombination time of electron-hole pairs of g-C3N4 is ≈26.13 µs, indicating that the construction of heterojunctions promotes charge transfer. The 2P1/2/2G9/2/4G7/2/2H11/2/4F7/2→4I9/2 emissions from Nd3+ can also be absorbed by heterostructures, which improves the utilization of light. The energy change of the key rate measurement step CO2 *→COOH* decreases through Nd single atom modification.

Dimensionally Intact Construction of Ultrathin S-Scheme CuFe2O4/ZnIn2S4 Heterojunctional Photocatalysts for CO2 Photoreduction

The conversion of CO2 into carbon-neutral fuels such as methane (CH4) through selective photoreduction is highly sought after yet remains challenging due to the slow multistep proton-electron transfer processes and the formation of various C1 intermediates. This research highlights the cooperative interaction between Fe3+ and Cu2+ ions transitioning to Fe2+ and Cu+ ions, enhancing the photocatalytic conversion of CO2 to methane. We introduce an S-scheme heterojunction photocatalyst, CuFe2O4/ZnIn2S4, which demonstrates significant efficiency in CO2 methanation under light irradiation. The CuFe2O4/ZnIn2S4 heterojunction forms an internal electric field that aids in the mobility and separation of exciton carriers under a wide solar spectrum for exceptional photocatalytic performance. Remarkably, the optimal CuFe2O4/ZnIn2S4 heterojunction system achieved an approximately 68-time increase in CO2 conversion compared with ZnIn2S4 and CuFe2O4 nanoparticles using only pure water, with nearly complete CO selectivity and yields of CH4 and CO reaching 172.5 and 202.4 μmol g-1 h-1, respectively, via a 2-electron oxygen reduction reaction (ORR) process. The optimally designed CuFe2O4/ZnIn2S4 heterojunctional system achieved approximately 96% conversion of BA and 98.5% selectivity toward benzaldehyde (BAD). Additionally, this photocatalytic system demonstrated excellent cyclic stability and practical applicability. The photogenerated electrons in the CuFe2O4 conduction band enhance the reduction of Fe3+/Cu2+ to Fe2+/Cu+, creating a microenvironment conducive to CO2 reduction to CO and CH4. Simultaneously, the appearance of holes in the ZnIn2S4 valence band facilitates water oxidation to O2. The synergistic function within the CuFe2O4/ZnIn2S4 heterojunction plays a pivotal role in facilitating charge transfer, accelerating water oxidation, and thereby enhancing CO2 reduction kinetics. This study offers valuable insights and a strategic framework for designing efficient S-scheme heterojunctions aimed at achieving carbon neutrality through solar fuel production.

Matched Redox Kinetics on Triazine-Based Carbon Nitride/Ni(OH)2 for Stoichiometric Overall Photocatalytic CO2 Conversion

Mismatched reaction kinetics of CO2 reduction and H2O oxidation is the main obstacle limiting the overall photocatalytic CO2 conversion. Here, a molten salt strategy is used to construct tubular triazine-based carbon nitride (TCN) with more adsorption sites and stronger activation capability. Ni(OH)2 nanosheets are then grown over the TCN to trigger a proton-coupled electron transfer for a stoichiometric overall photocatalytic CO2 conversion via "3CO2 + 2H2O = CH4 + 2CO + 3O2." TCN reduces the energy barrier of H2O dissociation to promote H2O oxidation to O2 and supply sufficient protons to Ni(OH)2, whereby the CO2 conversion is accelerated due to the enhanced proton-coupled electron transfer process enabled by the sufficient proton supply from TCN. This work highlights the importance of matching the reaction kinetics of CO2 reduction and H2O oxidation by proton-coupled electron transfer on stoichiometric overall photocatalytic CO2 conversion.

Construction of a CoNiHHTP MOF/PHI Z-Scheme Heterojunction for ppb Level NO2 Photoelectric Sensing with 405 nm Irradiation at RT

Ultrasensitive photoelectric detection of nitrogen dioxide (NO2) with PHI under visible light irradiation at room temperature (RT) remains an ongoing challenge due to the low charge separation and scarce adsorption sites. In this work, a dimensionally matched ultrathin CoNiHHTP MOF/PHI Z-scheme heterojunction is successfully constructed by taking advantage of the π-π interactions existing between the CoNiHHTP MOF and PHI. The amount-optimized heterojunction possesses a record detection limit of 1 ppb (response = 15.6%) for NO2 under 405 nm irradiation at RT, with reduced responsive (3.6 min) and recovery (2.7 min) times, good selectivity and reversibility, and long-time stability (150 days) compared with PHI, even superior to others reported at RT. Based on the time-resolved photoluminescence spectra, in situ X-ray photoelectron spectra, and diffuse reflectance infrared Fourier transform spectroscopy results, the resulting sensing performance is attributed to the favorable Z-scheme charge transfer and separation. Moreover, the Ni nodes favorably present in adjacent metal sites between the lamellae contribute to charge transfer and redistribution, whereas Co nodes could act as selective centers for promoted adsorption of NO2. Interestingly, it is confirmed that the CoNiHHTP MOF/PHI heterojunction could effectively reduce the influence of O2 in the gas-sensitive reaction due to their unique bimetallic (Co and Ni) nodes, which is also favorable for the improved sensing performances for NO2. This work provides a feasible strategy to develop promising PHI-based optoelectronic gas sensors at RT.

A general strategy for the enhanced H2 production performance of CdS/noble metal sulfide nanorods photocatalysts by cation exchange

In this work, we report a series of noble metal (Ag, Au, Pt, etc.) sulfides that act as co-catalysts anchoring on CdS nanorods (NRs) obtained via a cation exchange strategy to promote photocatalytic hydrogen evolution. CdS NRs are first generated via a hydrothermal routine, noble metal sulfides are then in-situ grown on CdS NRs by a cation exchange method. CdS/Ag2S, CdS/Au2S and CdS/PtS NRs show improved hydrogen production rates (2506.88, 1513.17 and 1004.54 μmol g-1h-1, respectively), approximately 18, 11 and 7 times higher than CdS NRs (138.27 μmol g-1h-1). Among CdS/noble metal sulfide NRs, CdS/Ag2S NRs present the best H2 production performance. The apparent quantum efficiency (AQE) of CdS/Ag2S NRs achieves 3.11 % at λ = 370 nm. The improved photocatalytic performance of CdS/noble metal sulfide NRs dues to the following points: i) Noble metal sulfides on CdS NRs are beneficial for elevating light-absorbing and light-utilizing capacities, contributing to generating more photoexcited charges; ii) Noble metal sulfides are in-situ grown on CdS NRs as electron acceptors by a cation exchange method, thus the photoexcited electrons generated by CdS NRs rapidly migrate to the surface of noble metal sulfides, successfully accelerating the carriers separation efficiency. This series of noble metal sulfides acting as co-catalysts anchoring on CdS NRs offer new insights into the construction principles of high-performance photocatalytic hydrogen evolution catalysts.

S-scheme heterojunction of crystalline carbon nitride nanosheets and ultrafine WO3 nanoparticles for photocatalytic CO2 reduction

Highly crystalline carbon nitride polymers have shown great opportunities in overall water photosplitting; however, their mission in light-driven CO2 conversion remains to be explored. In this work, crystalline carbon nitride (CCN) nanosheets of poly triazine imide (PTI) embedded with melon domains are fabricated by KCl/LiCl-mediated polycondensation of dicyandiamide, the surface of which is subsequently deposited with ultrafine WO3 nanoparticles to construct the CCN/WO3 heterostructure with a S-scheme interface. Systematic characterizations have been conducted to reveal the compositions and structures of the S-scheme CCN/WO3 hybrid, featuring strengthened optical capture, enhanced CO2 adsorption and activation, attractive textural properties, as well as spatial separation and directed movement of light-triggered charge carriers. Under mild conditions, the CCN/WO3 catalyst with optimized composition displays a high photocatalytic activity for reducing CO2 to CO in a rate of 23.0 µmol/hr (i.e., 2300 µmol/(hr·g)), which is about 7-fold that of pristine CCN, along with a high CO selectivity of 90.6% against H2 formation. Moreover, it also manifests high stability and fine reusability for the CO2 conversion reaction. The CO2 adsorption and conversion processes on the catalyst are monitored by in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), identifying the crucial intermediates of CO2*-, COOH* and CO*, which integrated with the results of performance evaluation proposes the possible CO2 reduction mechanism.

Efficient Homojunction/Heterojunction Photocatalyst via Integrating CsPbBr3 Quantum Dot Homojunction with TiO2 for Degradation of Organic Dyes

A novel TiO2-CsPbBr3(Q) photocatalyst is proposed and rationally constructed, where CsPbBr3 perovskite quantum dots (QDs) of various sizes inside mesopore TiO2 (M-TiO2) are integrated. These perovskite QDs, generated in situ within M-TiO2, establish a type-II homojunction. Interestingly, a Z-scheme heterojunction is simultaneously formed at the interface between CsPbBr3 and TiO2. Due to the coexistence of the type-II homojunction and the Z-scheme heterojunction, photogenerated electrons are effectively transferred from TiO2 to CsPbBr3, thereby suppressing carrier recombination and thus enhancing the degradation of rhodamine B (RhB). Compared with pure CsPbBr3 and TiO2, TiO2-CsPbBr3(Q) shows significantly enhanced photocatalytic performance for RhB degradation. The degradation efficiency of RhB in the presence of the TiO2-CsPbBr3(Q) attains 97.7% in 5 min under light illumination, representing the highest efficiency observed among photocatalysts based on TiO2. This study will facilitate the development of superior semiconductor catalysts for photocatalytic applications.

Hetero-Motif Molecular Junction Photocatalysts: A New Frontier in Artificial Photosynthesis

ConspectusTo cope with the increasingly global greenhouse effect and energy shortage, it is urgent to develop a feasible means to convert anthropogenic excess carbon dioxide (CO2) into energy resources. The photocatalytic CO2 reduction reaction (CO2RR) coupled with the water oxidation reaction (WOR), known as artificial photosynthesis, is a green, clean, and promoting strategy to deal with the above issues. Among the reported photocatalytic systems for CO2 reduction, the main challenge is to achieve WOR simultaneously due to the limited charge separation efficiency and complicated dynamic process. To address the problem, scientists have assembled two nanosemiconductor motifs for CO2RR and WOR into a heterojunction photocatalyst to realize artificial photosynthesis. However, it is difficult to clearly explore the corresponding catalytic mechanism and establish an accurate structure-activity relationship at the molecular level for their aperiodic distribution and complicated structural information. Standing on the shoulders of the heterojunction photocatalysts, a new-generation material, hetero-motif molecular junction (HMMJ) photocatalysts, has been developed and studied by our laboratory. A hetero-motif molecular junction is a class of crystalline materials with a well-defined and periodic structure, adjustable assembly mode, and semiconductor-like properties, which is composed of two predesigned motifs with oxidation and reduction, respectively, by coordination or covalent bonds. The intrinsic properties make these catalysts susceptible to functional modifications to improve light absorption and electrical conductivity. The small size and short distance of the motifs can greatly promote the efficiency of photogenerated electron-hole separation and migration. Based on these advantages, they can be used as potential excellent photocatalysts for artificial photosynthesis. Notably, the explicit structural information determined by single-crystal or powder X-ray diffraction can provide a visual platform to explore the reaction mechanism. More importantly, the connection number, spatial distance, interaction, and arrangement mode of the structural motifs can be well-designed to explore the detailed structure-activity relationship that can be hardly studied in nanoheterojunction photocatalyst systems. In this regard, HMMJ photocatalysts can be a new frontier in artificial photosynthesis and serve as an important bridge between molecular photocatalysts and solid photocatalysts. Thus, it is very important to summarize the state-of-the-art of the HMMJ photocatalysts used for artificial photosynthesis and to give in-depth insight to promote future development.In this Account, we have summarized the recent advances in artificial photosynthesis using HMMJ photocatalysts, mainly focusing on the results in our lab. We present an overview of current knowledge about developed photocatalytic systems for artificial photosynthesis, introduce the design schemes of the HMMJ photocatalysts and their unique advantages as compared to other photocatalysts, summarize the construction strategies of HMMJ photocatalysts and their application in artificial photosynthesis, and explain why hetero-motif molecular junctions can be promising photocatalysts and show that they provide a powerful platform for studying photocatalysis. The structure-activity relationship and charge separation dynamics are illustrated. Finally, we bring our outlook on present challenges and future development of HMMJ photocatalysts and their potential application prospects on other photocatalytic reaction systems. We believe that this Account will afford important insights for the construction of high-efficiency photocatalysts and guidance for the development of more photocatalytic systems in an atom-economic, environmentally friendly, and sustainable way.

Towards molecular understanding of surface and interface catalytic engineering in TiO2/TiOF2 nanosheets photocatalytic antibacterial under visible light irradiation

TiO2/TiOF2 Z-scheme nanosheets have been successfully synthesized for photocatalytic antibacterial. The antibacterial efficiency of TiO2/TiOF2 against E. coli and S. aureus were 99.90 % and 81.89 % at low material concentration (110 μg/mL), respectively, which are higher than those of pure TiO2, TiOF2, and Degussa P25. In situ molecular spectroscopy results demonstrate that the microstructure of the synthesized material can be reconstructed and optimized to enhance the exposure of the active sites·H2O and O2 are effectively adsorbed on the catalyst surface and activated to form OH…Ti and O…Ti surface active species. Furthermore, the dense interface formed in TiO2/TiOF2 acts as an efficient transport path for photoexcited electrons from TiO2 to TiOF2, and thus accelerates the formation of reactive oxygen species. Finally, the mechanism of bacterial inactivation is systematically discussed considering the main active substances, cell morphological changes, and activity of antioxidant enzymes.

P-N Heterojunction Embedded CuS/TiO2 Bifunctional Photocatalyst for Synchronous Hydrogen Production and Benzylamine Conversion

The coupling of photocatalytic hydrogen production and selective oxidation of benzylamine is a topic of significant research interest. However, enhancing the bifunctional photocatalytic activity in this context is still a major challenge. The construction of Z-scheme heterojunctions is an effective strategy to enhance the activity of bifunctional photocatalysts. Herein, a p-n type direct Z-scheme heterojunction CuS/TiO2 is constructed using metal-organic framework (MOF)-derived TiO2 as a substrate. The carrier density is measured by Mott-Schottky under photoexcitation, which confirms that the Z-scheme electron transfer mode of CuS/TiO2 is driven by the diffusion effect caused by the carrier concentration difference. Benefiting from efficient charge separation and transfer, photogenerated electrons, and holes are directedly transferred to active oxidation and reduction sites. CuS/TiO2 also exhibits excellent bifunctional photocatalytic activity without noble metal cocatalysts. Among them, the H2 evolution activity of the CuS/TiO2 is found to be 17.1 and 29.5 times higher than that of TiO2 and CuS, respectively. Additionally, the yields of N-Benzylidenebenzylamine (NBB) are 14.3 and 47.4 times higher than those of TiO2 and CuS, respectively.

Engineering 0D/2D Architecture of Ni(OH)2 Nanoparticles on Covalent Organic Framework Nanosheets for Selective Visible-Light-Driven CO2 Reduction

Low-dimensional materials serving as photocatalysts favor providing abundant unsaturated active sites and shortening the charge transport distance, but the high surface energy readily causes the aggregation that limits their application. Herein, it is demonstrated that 2D covalent organic framework (COF) TpBD nanosheets are effective in the dispersion and stabilization of 0D Ni(OH)2 . The COF precursor TpBD is synthesized from the Schiff base condensation of 1,3,5-triformylphloroglucinol (Tp) and benzidine (BD) and exfoliated into 2D nanosheets named BDNs via ultrasonication. The formation of highly dispersive 0D Ni(OH)2 on BDNs is reached under a mild weak basic condition, enabling robust active sites for CO2 adsorption/activation and rapid interface cascaded electron transport channels for the accumulation of long-lived photo-generated charges. The champion catalyst 30%Ni-BDNs effectively catalyze the CO2 to CO conversion under visible-light irradiation, offering a high CO evolution rate of 158.4 mmol g-1 h-1 and turnover frequency of 51 h-1 . By contrast, the counterpart photocatalyst, the bulk TpBD stabilized Ni(OH)2 , affords a much lower CO evolution rate and selectivity. This work demonstrates a new avenue to simultaneously construct efficient active sites and electron transport channels by coupling 0D metal hydroxides and 2D COF nanosheets for CO2 photoreduction.

Artificial Surface Electron Network Prompted Energy Band Structure Tuning: Boosting Solar-to-Hydrogen Evolution Performance

The energy gap and conduction band position of catalysts play crucial roles in solar-to-hydrogen (STH) transformation technology. Unfortunately, although an increase in the conduction band position can effectively promote the photoreduction capacity of the photocatalyst, it will inevitably widen the band gap, thus reducing the light-absorption scale. It seems that there is a contradiction between the reduction of band gap and the improvement of conduction band position, which is that "You can't have your cake and eat it too." Herein, an ultrasimple molecular adsorption strategy was engineered by adsorbing hydrazine hydrate on the surface of TiO2. The theoretical and experimental results indicated that the strong electron-donating effect of amino groups in hydrazine hydrate can promote the redistribution of photogenerated electrons and form surface electron networks on the surface of TiO2 photocatalysts, which can bend the conduction band upward and significantly improve its photoreduction ability. Besides, the adsorption of -NH2 can narrow the band gap width of TiO2 and promote the separation efficiency of photogenerated carriers. More interestingly, it can also effectively enhance the adsorption of H2O and H+, thus greatly elevating the STH efficiency. The STH rate of the as-prepared T-N-3 can be increased by ≈530%. This work sheds light on a new approach for resolving the contradiction between photoreduction and light absorption capabilities to effectively enhance photocatalytic performance.

Electrocatalytic Systems for NOx Valorization in Organonitrogen Synthesis

Inorganic nitrogen oxide (NOx ) species, such as NO, NO2 , NO3 - , NO2 - generated from the decomposition of organic matters, volcanic eruptions and lightning activated nitrogen, play important roles in the nitrogen cycle system and exploring the origin of life. Meanwhile, excessive emission of NOx gases and residues from industry and transportation causes troubling problems to the environment and human health. How to efficiently handle these wastes is a global problem. In response to the growing demand for sustainability, scientists are actively pursuing sustainable electrochemical technologies powered by renewable energy sources and efficient utilization of hydrogen energy to convert NOx species into high-value organonitrogen chemicals. In this minireview, recent advances of electrocatalytic systems for NOx species valorization in organonitrogen synthesis are classified and described, such as amino acids, amide, urea, oximes, nitrile etc., that have been widely applied in medicine, life science and agriculture. Additionally, the current challenges including multiple side reactions and complicated paths, viable solutions along with future directions ahead in this field are also proposed. The coupling electrocatalytic systems provide a green mode for fixing nitrogen cycle bacteria and bring enlightenment to human sustainable development.

Bi3O4Cl/g-C3N4/Cd0.5Zn0.5S Double Z-Scheme Heterojunction Photocatalyst for Highly Selective CO2 Reduction to Methane

Solar-energy-driven CO2 hydrogenation is a promising strategy to alleviate the climate crisis. Methane is a desirable derivative of CO2 reduction. However, developing a photocatalyst for highly active and selective CH4 generation remains challenging. Herein, we report a double Z-scheme Bi3O4Cl/g-C3N4/Cd0.5Zn0.5S photocatalyst for efficient reduction of CO2 to CH4. In situ characterization techniques confirmed that the charge migration mechanism in Bi3O4Cl/g-C3N4/Cd0.5Zn0.5S promotes charge separation through double internal electric fields. As a result, the optimized C0.01B0.02C catalyst displayed a formation rate high up to 25.34 μmol g-1 h-1 and a selectivity of 96.52% of CH4. Moreover, the AQY of CO2 conversion on C0.01B0.02C (1.84%) was almost 41 times higher than that of the bare CN. This study provides a novel perspective to develop heterojunction photocatalysts for selective CO2 conversion to CH4.

Fabrication of a PCN/BiOBr 2D hybrid with improved photocatalytic performance of 2,4-dichorophenol degradation

Photocatalysis has received much attention as an environmentally friendly route to manage the emerging organic pollution problems. Herein, BiOBr nanosheets have been synthesized by a hydrothermal method, and then PCN/BiOBr hybrids are designed via a facile wet chemical method. The as-prepared PCN/BiOBr hybrids are characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectra (UV-vis DRS), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The PCN/BiOBr composite exhibits remarkable improved activity in the degradation of 2,4-dichlorophenol (2,4-DCP) as compared to the pristine BiOBr. Based on the ·OH amount-related fluorescence spectra fluorescence and the photoelectrochemistry (PEC) tests, it is confirmed that the enhanced photocatalytic performance of PCN/BiOBr is attributed to the promoted charge separation. Moreover, by means of the radical-trapping experiments it is demonstrated that the formed ·O2- species, as the electron-modulated direct products, are the primary active species during the photocatalytic degradation of 2,4-DCP. This work would provide a feasible design strategy to fabricate high-activity photocatalysts for 2,4-DCP degradation.

Asymmetric Cu-N-La Species Enabling Atomic-Level Donor-Acceptor Structure and Favored Reaction Thermodynamics for Selective CO2 Photoreduction to CH4

Photocatalytic CO2 reduction into ideal hydrocarbon fuels, such as CH4 , is a sluggish kinetic process involving adsorption of multiple intermediates and multi-electron steps. Achieving high CH4 activity and selectivity therefore remains a great challenge, which largely depends on the efficiency of photogenerated charge separation and transfer as well as the intermediate energy levels in CO2 reduction. Herein, we construct La and Cu dual-atom anchored carbon nitride (LaCu/CN), with La-N4 and Cu-N3 coordination bonds connected by Cu-N-La bridges. The asymmetric Cu-N-La species enables the establishment of an atomic-level donor-acceptor structure, which allows the migration of electrons from La atoms to the reactive Cu atom sites. Simultaneously, intermediates during CO2 reduction on LaCu/CN demonstrate thermodynamically more favorable process for CH4 formation based on theoretical calculations. Eventually, LaCu/CN exhibits a high selectivity (91.6 %) for CH4 formation with a yield of 125.8 μmol g-1 , over ten times of that for pristine CN. This work presents a strategy for designing multi-functional dual-atom based photocatalysts.

Phosphate ester functionalized fluorene-benzothiadiazole alternating copolymer/hydroxylated g-C3N4 heterojunctions for efficient hydrogen evolution under visible-light irradiation

It is highly desirable to explore functionalized polymer semiconductor/g-C3N4 heterojunction photocatalysts with the tight interfacial connection for promoting the photogenerated electron-hole pair separation, improving the hydrophilicity, extending the visible light response and achieving the efficient visible light-driven H2 evolution. Herein, we synthesized novel poly[9,9-bis(3-ethyl phosphate propyl)fluorene-alt-benzothiadiazole] (PPFBT) with a phosphate ester on every repeating unit by the Suzuki polymerization and then fabricated PPFBT/hydroxylated g-C3N4 (PPFBT/CN-OH) heterojunctions via a surface hydroxyl-induced assembly process. The ratio-optimized 5PPFBT/CN-OH shows the hydrogen evolution activity of 2662.4 μmol·g-1·h-1, an 11.1-time enhancement compared to CN-OH. The improved photocatalytic activity is mainly attributed to the enhanced electron-hole pair separation due to the tight interfacial connection by hydrogen bond (P=O…H-O) and N…S interactions between PPFBT and CN-OH. It is verified that abundant phosphate ester groups of PPFBT improve the hydrophilicity and form coordination bonds with platinum (P=O:Pt) as a cocatalyst to facilitate water splitting for H2 evolution. It is also confirmed that the enhanced electron-hole pair separation is mainly dependent on the excited high-energy level electron transfer from CN-OH to PPFBT. This work provides a rational molecular design strategy for constructing efficient functionalized polymer semiconductor/g-C3N4 heterojunctions for sunlight-driven H2 evolution.

Deep Electronic State Regulation through Unidirectional Cascade Electron Transfer Induced by Dual Junction Boosting Electrocatalysis Performance

Unidirectional cascade electron transfer induced by multi-junctions is essential for deep electronic state regulation of the catalytic active sites, while this advanced concept has rarely been investigated in the field of electrocatalysis. In the present work, a dual junction heterostructure (FePc/L-R/CN) is designed by anchoring iron phthalocyanine (FePc)/MXene (L-Ti3 C2 -R, R═OH or F) heterojunction on g-C3 N4 nanosheet substrates for electrocatalysis. The unidirectional cascade electron transfer (g-C3 N4 → L-Ti3 C2 -R → FePc) induced by the dual junction of FePc/L-Ti3 C2 -R and L-Ti3 C2 -R/g-C3 N4 makes the Fe center electron-rich and therefore facilitates the adsorption of O2 in the oxygen reduction reaction (ORR). Moreover, the electron transfer between FePc and MXene is facilitated by the axial Fe─O coordination interaction of Fe with the OH in alkalized MXene nanosheets (L-Ti3 C2 -OH). As a result, FePc/L-OH/CN exhibits an impressive ORR activity with a half-wave potential (E1/2 ) of 0.92 V, which is superior over the catalysts with a single junction and the state-of-the-art Pt/C (E1/2 = 0.85 V). This work provides a broad idea for deep regulation of electronic state by the unidirectional cascade multi-step charge transfer and can be extended to other proton-coupled electron transfer processes.

Acceleration of Photocatalytic CO2 Reduction at Intimate Interface in AgBr/BiOBr Heterojunctions via a Co-anion Strategy

Constructing heterojunctions with strong interfacial interactions can accelerate the transfer and separation of photogenerated charge carriers. However, finding a simple strategy to construct tightly connected heterojunctions remains a major challenge. In this work, AgBr/BiOBr S-scheme heterojunctions were designed via a straightforward co-anionic strategy without using a solvent. The experimental results indicate that the AgBr/BiOBr heterojunction with a close contact interface can extend the use of visible light, accelerate the separation, and induce the transfer of photoelectrons and holes while maintaining an excellent redox capacity. Undoubtedly, the photocatalytic reduction rate of carbon dioxide to carbon monoxide by 1.0 AgBr/BiOBr is 87.73 μmol·g-1·h-1 (quantum efficiency is 0.57%), which is 12.15 times and 4.45 times higher than that of pure AgBr and BiOBr, respectively. The present work provides insights into a simple strategy for the preparation of strongly interacting interfacial heterojunctions for photocatalytic CO2 reduction.

Target-Driven Z-Scheme Heterojunction Formation for ppb H2S Detection from Exhaled Breath at Room Temperature

As a biomarker of periodontitis, sensitive and timely monitoring of hydrogen sulfide (H2S) in exhaled breath at room temperature (RT) is important for the early intervention of oral diseases. However, the required high operation temperature to achieve high sensitivity is still a technical challenge for directly monitoring exhaled breath. In this study, by integrating metal-organic frameworks (MOFs) into self-aligned TiO2 nanotube arrays (NTs), a chemiresistor gas sensor with outstanding sensitivity and selectivity was constructed for the detection of H2S at RT. The precise regulation of a Co(III)-based MOF CoBDC-NH2 (BDC-NH2 = 2-aminoterephthalic acid) not only induced more active surface for the preconcentration of the target gas but also caused a buildup of Z-scheme heterojunctions in the H2S atmosphere that induced an ultrahigh sensitivity at RT via 365 nm light-emitting diode irradiation. The response and recovery times decreased to ∼50 and ∼28%, respectively, when this system was exposed to UV light. The sensing chips based on the as-prepared TiO2/CoBDC-NH2 NTs exhibited the highest-ranking H2S sensing performance, i.e., a limit of detection of 1.3 ppb and excellent selectivity even to 100 times high concentration of interference gases, owing to the synergistic chemical environment provided by NH2-functionalized Co-MOFs and abundant photogenerated electrons provided by Z-scheme heterojunctions. This sensing chip was also used in a practical application for the timely monitoring of halitosis from direct exhaled breath. This study provides a reliable and sensitive design for clinically aiding the timely detection of H2S in a complex oral environment.

A Z-Scheme Heterojunctional Photocatalyst Engineered with Spatially Separated Dual Redox Sites for Selective CO2 Reduction with Water: Insight by In Situ µs-Transient Absorption Spectra

Solar-driven CO₂ reduction by water with a Z-scheme heterojunction affords an avenue to access energy storage and to alleviate greenhouse gas (GHG) emissions, yet the separation of charge carriers and the integrative regulation of water oxidation and CO₂ activation sites remain challenging. Here, a BiVO₄ /g-C₃ N₄ (BVO/CN) Z-scheme heterojunction as such a prototype is constructed by spatially separated dual sites with CoO_x clusters and imidazolium ionic liquids (IL) toward CO₂ photoreduction. The optimized CoO_x -BVO/CN-IL delivers an ≈80-fold CO production rate without H₂ evolution compared with urea-C₃ N₄ counterpart, together with nearly stoichiometric O₂ gas produced. Experimental results and DFT calculations unveil the cascade Z-scheme charge transfer and subsequently the prominent redox co-catalysis by CoO_x and IL for holes-H₂ O oxidation and electrons-CO₂ reduction, respectively. Moreover, in situ µs-transient absorption spectra clearly show the function of each cocatalyst and quantitatively reveal that the resulting CoO_x -BVO/CN-IL reaches up to the electron transfer efficiency of 36.4% for CO₂ reduction, far beyond those for BVO/CN (4.0%) and urea-CN (0.8%), underlining an exceptional synergy of dual reaction sites engineering. This work provides deep insights and guidelines for the rational design of highly efficient Z-scheme heterojunctions with precise redox catalytic sites toward solar fuel production.

Improved Visible-Light Photocatalytic H2 Evolution of G-C3N4 Nanosheets by Constructing Heterojunctions with Nano-Sized Poly(3-Thiophenecarboxylic Acid) and Coordinating Fe(III)

It is highly desirable to enhance the photogenerated charge separation of g-C₃N₄ by constructing efficient heterojunctions, especially with an additional organic constitution for solar-hydrogen conversion. Herein, g-C₃N₄ nanosheets have been modified controllably with nano-sized poly(3-thiophenecarboxylic acid) (PTA) through in situ photopolymerization and then coordinated with Fe(III) via the -COOH groups of modified PTA, forming an interface of tightly contacted nanoheterojunctions between the Fe(III)-coordinated PTA and g-C₃N₄. The resulting ratio-optimized nanoheterojunction displays a ~4.6-fold enhancement of the visible-light photocatalytic H₂ evolution activity compared to bare g-C₃N₄. Based on the surface photovoltage spectra, measurements of the amount of •OH produced, photoluminescence (PL) spectra, photoelectrochemical curves, and single-wavelength photocurrent action spectra, it was confirmed that the improved photoactivity of g-C₃N₄ is attributed to the significantly promoted charge separation by the transfer of high-energy electrons from the lowest unoccupied molecular orbital (LUMO) of g-C₃N₄ to the modified PTA via the formed tight interface, dependent on the hydrogen bond interaction between the -COOH of PTA and the -NH₂ of g-C₃N₄, and the continuous transfer to the coordinated Fe(III) with -OH favorable for connection with Pt as the cocatalyst. This study demonstrates a feasible strategy for solar-light-driven energy production over the large family of g-C₃N₄ heterojunction photocatalysts with exceptional visible-light activities.

Controlled Synthesis of Ag-SnO2/α-Fe2O3 Nanocomposites for Improving Visible-Light Catalytic Activities of Pollutant Degradation and CO2 Reduction

The key to developing highly active α-Fe2O3-based photocatalysts is to improve the charge separation and efficiently utilize the electrons with sufficient thermodynamic energy. Herein, α-Fe2O3 nanosheets (FO) were synthesized using a metal-ion-intervened hydrothermal method and then coupled with SnO2 nanosheets (SO) to obtain SO/FO nanocomposites. Subsequently, nanosized Ag was selectively loaded on SO using the photo-deposition method to result in the ternary Ag-SO/FO nanocomposites. The optimal nanocomposite could realize the efficient aerobic degradation of 2,4-dichlorophenol as a representative organic pollutant under visible-light irradiation (>420 nm), exhibiting nearly six-fold degradation rates of that for FO. Additionally, the Ag-SO/FO photocatalyst is also applicable to the visible-light degradation of other organic pollutants and even CO2 reduction. By using steady-state surface photovoltage spectroscopy, fluorescence spectroscopy, and electrochemical methods, the photoactivity enhancement of Ag-SO/FO is principally attributed to the improved charge separation by introducing SO as an electron platform for the high-energy-level electrons of FO. Moreover, nanosized Ag on SO functions as a cocatalyst to further improve the charge separation and facilitate the catalytic reduction. This work provides a feasible design strategy for narrow-bandgap semiconductor-based photocatalysts by combining an electron platform and a cocatalyst.

g-C3N4-wrapped nickel doped zinc oxide/carbon core-double shell microspheres for high-performance photocatalytic hydrogen production

The development of efficient heterojunctions with enhanced photocatalytic properties is considered a promising approach for photocatalytic hydrogen production. In this study, graphitic carbon nitride (g-C₃N₄)-wrapped nickel-doped zinc oxide/carbon (Ni-ZnO@C/g-C₃N₄) core-double shell heterojunctions with unique core-double shell structures were employed as efficient photocatalysts through an innovative approach. Ni doping can enhance the intensity and range of visible light absorption in ZnO, and the carbon core coupled with the hollow double-shell structure can accelerate the charge transfer rate and improve the photon utilization efficiency. Meanwhile, the construction of the Z-scheme heterojunction extended the electron-hole pair transport path. In addition, the Z-scheme charge-transfer mechanism of Ni-ZnO@C/g-C₃N₄ under simulated sunlight was verified by photoluminescence (PL) and electron spin resonance (ESR) experiments. As a result, the obtained photocatalyst acquired a high hydrogen evolution rate of 336.08 μmol g^-1h^-1, which is 36.49 times higher than that of pristine ZnO. Overall, this work may provide a pathway for the construction of highly efficient photocatalysts with unique core-double shell structures.

Engineering a Copper Single-Atom Electron Bridge to Achieve Efficient Photocatalytic CO2 Conversion

Developing highly efficient and stable photocatalysts for the CO₂ reduction reaction (CO₂ RR) remains a great challenge. We designed a Z-Scheme photocatalyst with N-Cu₁ -S single-atom electron bridge (denoted as Cu-SAEB), which was used to mediate the CO₂ RR. The production of CO and O₂ over Cu-SAEB is as high as 236.0 and 120.1 μmol g^-1  h^-1 in the absence of sacrificial agents, respectively, outperforming most previously reported photocatalysts. Notably, the as-designed Cu-SAEB is highly stable throughout 30 reaction cycles, totaling 300 h, owing to the strengthened contact interface of Cu-SAEB, and mediated by the N-Cu₁ -S atomic structure. Experimental and theoretical calculations indicated that the SAEB greatly promoted the Z-scheme interfacial charge-transport process, thus leading to great enhancement of the photocatalytic CO₂ RR of Cu-SAEB. This work represents a promising platform for the development of highly efficient and stable photocatalysts that have potential in CO₂ conversion applications.

Engineering interface structures for heterojunction photocatalysts

Solar photocatalysis is the most ideal solution to global energy concerns and environmental deterioration nowadays. The heterojunction combination has become one of the most successful and effective strategies to design and manufacture composite photocatalysts. Heterojunction structures are widely documented to markedly improve the photocatalytic behavior of materials by enhancing the separation and transfer of photogenerated charges, widening the light absorption range, and broadening redox potentials, which are attributed to the presence of both build-in electric fields at the interface of two different materials and the complementarity between different electron structures. So far, a large number of heterojunction photocatalytic materials have been reported and applied for water splitting, reduction of carbon dioxide and nitrogen, environmental cleaning, etc. This review outlines the recent accomplishments in the design and modification of interface structures in heterojunction photocatalysts, aiming to provide some useful perspectives for future research in this field.

Theoretical study on an oxygen-modified phosphorene autogenous Z-scheme heterojunction for hydrogen evolution

We propose a novel strategy for the construction of Z-scheme heterojunction photocatalyst based on in situ chemical modification and autogenous black phosphorus nanosheets. Such heterostructures have negligible lattice mismatch ratio and fast electron transfer rate, which would provide a highly universal and efficient design and synthesis strategy with guiding significance for Z-scheme heterojunctions.

Controlled Synthesis of Nitro-Terminated Oligothiophene/Crystallinity-Improved g-C3N4 Heterojunctions for Enhanced Visible-Light Catalytic H2 Production

It is highly desired to explore closely contacted polymer semiconductor/g-C₃N₄ heterojunction photocatalysts with promoted photogenerated-carrier separation and extended visible-light response for efficient visible-light-driven H₂ production. Here, we first synthesized the nitro-terminated oligothiophene (OTh) by the controlled copolymerization of thiophene and 2-nitrothiophene monomers, then constructed the nitro-terminated oligothiophene/crystallinity-improved g-C₃N₄ (OTh/g-C₃N₄) heterojunctions by a grinding-induced combination strategy. The ratio-optimized 20OTh₅/g-C₃N₄ shows highly efficient H₂ production activity up to 3.63 mmol h^-1 g^-1 under visible-light irradiation, with ∼25.9-time enhancement compared to that of g-C₃N₄. As verified by time-resolved photoluminescence spectra, surface photovoltage spectra, and the fluorescence spectra related to •OH amounts, the improved photocatalytic activity is due to the promoted photogenerated-carrier transfer and separation in the heterojunctions and the expanded visible-light response. It is also confirmed that the controlled OTh chain length, improved g-C₃N₄ crystallinity, and tight interface contact dependent on the hydrogen bonds and N···S interactions between OTh and g-C₃N₄ are reasonable for enhanced photogenerated-carrier separation with the electron transfer from OTh to g-C₃N₄. This work illustrates a feasible strategy to construct efficient polymer semiconductor/g-C₃N₄ heterojunction photocatalysts for solar-light-driven H₂ production.

Nickel Single-Atom Catalyst-Mediated Efficient Redox Cycle Enables Self-Checking Photoelectrochemical Biosensing with Dual Photocurrent Readouts

Developing a self-checking photoelectrochemical biosensor with dual photocurrent signals could efficiently eliminate false-positive or false-negative signals. Herein, a novel biosensor with dual photocurrent responses was established for the detection of acetylcholinesterase activity. To achieve photocurrent polarity-switchable behavior, the iodide/tri-iodide redox couple was innovatively introduced to simultaneously consume the photoexcited electrons and holes, which circumvents the inconvenience caused by the addition of different hole- and electron-trapping agents in the electrolyte. Importantly, benefiting from the high catalytic activity, the enhanced photoelectric responsivity can be realized after decorating the counter electrode with nickel single-atom catalysts, which promotes a more efficient iodide/tri-iodide redox reaction under low applied voltages. It is envisioned that the proposed photocurrent polarity switching system offers new routes to sensitive and reliable biosensing.

Insights on Carbon Neutrality by Photocatalytic Conversion of Small Molecules into Value-Added Chemicals or Fuels

Photocatalytic conversion of small molecules (including H₂O, CO₂, N₂, CH₄, and benzene) into value-added chemicals or fuels (e.g., H₂, NH₃, C₂ ⁺, etc.) is a promising strategy to cope with both the worldwide increasing energy demand and greenhouse gas emission in both energy sectors and chemical industry, thus paving an effective way to carbon neutrality. On the other hand, compared with conventionally thermo- or electrocatalytic processes, photoactivation can convert these very stable small molecules by the unexhausted solar energy, so leading to store solar energy in chemical bonds. Thus, it can effectively reduce the reliance on the nonrenewable fossil fuels and avoid the substantial emission of hazardous gases such as CO₂, NO _x , and so on while producing valued-added chemicals. For example, semiconductors can absorb solar light to split H₂O into H₂ and O₂ or convert CO₂ to alcohols, which can then be used as zero or neutral carbon energy sources. Although many efforts have already been made on photocatalytic small molecule activation, the light-energy conversion efficiency is still rather moderate and the yield of aimed value-added chemicals cannot meet the requirement of large-scale application. The core for these artificial photocatalytic processes is to discover a novel photocatalyst with high efficiency, low cost, and excellent durability. Over the past two decades, the Tang group has discovered a few benchmark photocatalysts (such as dual-metal-loaded metal oxides, atomic photocatalysts, carbon-doped TiO₂, and polymer heterojunctions, etc.) and investigated them for photocatalytic conversion of the above-mentioned five robust molecules into value-added chemicals or liquid fuels. Besides, advanced photocatalytic reaction systems including batch and continuous flow membrane reactors have been studied. More importantly, the underlying reaction mechanism of these processes has been thoroughly analyzed using the state-of-the-art static and time-resolved spectroscopies. In this Account, we present the group's recent research progress in search of efficient photocatalysts for these small molecules' photoactivation. First, the strategies used in the group with respect to three key factors in photocatalysis, including light harvesting, charge separation, and reactant adsorption/product desorption, are comprehensively analyzed with the aim to provide a clear strategy for efficient photocatalyst design toward small and robust molecule photoactivation under ambient conditions. The application of in situ and operando techniques on charge carrier dynamics and reaction pathway analysis used in the group are next discussed. Finally, we point out the key challenges and future research directions toward each specific small molecule's photoactivation process.

Bi-MOFs with two different morphologies promoting degradation of organic dye under simultaneous photo-irradiation and ultrasound vibration treatment

For the first time, piezocatalysis activity has been observed in bismuth-based MOFs (ultrasound vibration treatment) with two different morphologies, namely FCAU-17 (flakes) and CAU-17 (rods). CAU-17 and FCAU-17 were synthesized by solvothermal and ultrasonic methods, respectively, with the same organic ligand (1,3,5-benzenetricarboxylic acid) and metal salt (Bi(NO₃)₃·5H₂O). Among these, the apparent rate constant k of CAU-17 in piezo-photocatalysis is 3.9 × 10^-2 min^-1, which is ∼3.9 and ∼ 1.5 times of those in photocatalysis and piezocatalysis, respectively. CAU-17 showed much high piezo-photocatalytic activity during degradation of RhB. Efficiently coupling between piezocatalysis and photocatalysis has been realized in rod-like CAU-17 (ultrasound vibration treatment). Our results provide a new strategy to improve catalytic performance of Bi MOFs through an efficient synergistic piezo-photocatalysis approach for environmental remediation.

Trade-Off of Metal Sites in Fe-Ni Bimetal Metal-Organic Frameworks for Efficient CO2 Photoreduction with Nearly 100% CO Selectivity

This work disclosed the trade-off effect of two metal sites, which display distinct, key functionalities in naturally occurring and artificial catalysts for developing an advanced CO₂ reduction system. To exploit the metal-organic frameworks (MOFs) as advanced catalysts, we prepared a series of Prussian blue analogues (FeNi_x PBAs) of tunable Ni/Fe molar ratio without changing the oxidation state of Fe and Ni for use as a photocatalyst in the CO₂ reduction reaction (CRR). The FeNi_0.66 PBA gives a superior CO yield rate (14.28 mmol·g^-1·h^-1) with nearly 100% CO selectivity, but the PBA would be basically CRR-inactive without either Ni or Fe. Experimental and calculation studies demonstrate that Fe and Ni display distinct functionalities. Specifically, Fe is an efficient mediator that boosts the electron transfer both from the photosensitizer to FeNi_x PBA and from FeNi_x PBA to CO₂, and Ni serves as the active site for CO₂ adsorption and reduction. Intriguingly, when there is already sufficient Ni in the catalyst, further increase of the Ni content gives marginal gains in the CO₂ adsorption affinity that cannot offset the weakened electron transfer due to the Ni excess. The findings can help advance the design of bimetallic MOF catalysts that mimic naturally occurring bimetallic catalysts.