Eutectic Electrolyte with Unique Solvation Structure for High-Performance Zinc-Ion Batteries

Low-Cost Aqueous Electrolyte with MBA Additives for Uniform and Stable Zinc Deposition

Aqueous zinc ion batteries (AZIBs) are attracting increasing research interest due to their intrinsic safety, low cost, and scalability. However, the issues including hydrogen evolution, interface corrosion, and zinc dendrites at anodes have seriously limited the development of aqueous zinc ion batteries. Here, N,N-methylenebis(acrylamide) (MBA) additives with -CONH- groups are introduced to form hydrogen bonds with water and suppress H2O activity, inhibiting the occurrence of hydrogen evolution and corrosion reactions at the interface. In situ optical microscopy demonstrates that the MBA additive promotes the uniform deposition of Zn2+ and then suppresses the dendrite growth on the zinc anode. Therefore, Zn//Ti asymmetric batteries demonstrate a high plating/stripping efficiency of 99.5%, while Zn//Zn symmetric batteries display an excellent cycle stability for more than 1000 h. The Zn//MnO2 full cells exhibit remarkable cycling stability for 700 cycles in aqueous electrolytes with MBA additives. The additive engineering via MBA achieved the dendrite-free Zn anodes and stable full batteries, which is favorable for advanced AZIBs in practical applications.

Solvation Effect: The Cornerstone of High-Performance Battery Design for Commercialization-Driven Sodium Batteries

Sodium batteries (SBs) emerge as a potential candidate for large-scale energy storage and have become a hot topic in the past few decades. In the previous researches on electrolyte, designing electrolytes with the solvation theory has been the most promising direction is to improve the electrochemical performance of batteries through solvation theory. In general, the four essential factors for the commercial application of SBs, which are cost, low temperature performance, fast charge performance and safety. The solvent structure has significant impact on commercial applications. But so far, the solvation design of electrolyte and the practical application of sodium batteries have not been comprehensively summarized. This review first clarifies the process of Na+ solvation and the strategies for adjusting Na+ solvation. It is worth noting that the relationship between solvation theory and interface theory is pointed out. The cost, low temperature, fast charging, and safety issues of solvation are systematically summarized. The importance of the de-solvation step in low temperature and fast charging application is emphasized to help select better electrolytes for specific applications. Finally, new insights and potential solutions for electrolytes solvation related to SBs are proposed to stimulate revolutionary electrolyte chemistry for next generation SBs.

Achieving Dendrite-Free Zinc Metal Anodes via Molecule Anchoring and lon-Transport Pumping

The potential for scale-up application has been acknowledged by researchers for rechargeable aqueous zinc-ion batteries (ZIBs). Nonetheless, the progress of the development is significantly impeded due to the instability of the interface between the zinc anode and electrolyte. Herein, efficient and environmentally benign valine (Val) were introduced as aqueous electrolyte additive to stabilize the electrode/electrolyte interface (EEI) via functional groups in additive molecules, thus achieving reversible dendrite-free zinc anode. The amino groups present in Val molecules have a strong ability to adsorb on the surface of zinc metal, enabling the construction of anchored molecular layer on the surface of zinc anodes. The strongly polar carboxyl groups in Val molecules can act as ion-transport pumps to capture zinc ions in the electric double layer (EDL) through coordination chemistry. Therefore, this reconstructed EEI could modulate the zinc ion flux and simultaneously suppress side reactions and dendritic growth of Zn. Consequently, a long stable cycling up to 1400 h at a high current density of 20 mA cm-2 is achieved. Additionally, Zn//V2O5 full cell with Val additive exhibit enhanced cyclability, retaining 77 % capacity after 3000 cycles, displaying significant potential in promoting the commercialization of ZIBs.

Unique solvation structure induced by anionic Cl in aqueous zinc ion batteries

Aqueous zinc ion batteries (AZIBs) have garnered significant attention in large-scale static energy storage battery systems due to their low cost, high safety and environmental friendliness. However, it has some inherent problems during operation, such as the occurrence of side reactions (hydrogen evolution reaction, HER) and anode corrosion, formation of by-products and growth of metal dendrites. To analyze the mechanism of generation from aspect of the electrolyte solvation structure and make cell efficiency further improvements based on it, so we use DFT calculations to find the most stable solvation structure in AZIBs with ZnCl2 as the electrolyte and analyze it. We define the relative concentration C r , and calculate different groups metal cation cluster structures such as [ Zn ( H 2 O ) n ] 2 + , [ ZnCl ( H 2 O ) n ] + , [ ZnCl 2 ( H 2 O ) n ] and [ ZnCl 3 ( H 2 O ) n ] - that exist at different C r . We discuss the effect of different clusters formed due to the C r variations on the battery performance in terms of three aspects: the structural conformation, the cluster characteristics (including the hydrogen bonding network, bond lengths, bond angles, as well as the electrostatic potential ESP) and the cluster performance (including the adsorption energy Ea, binding energy Eb, and desolvation energy Edes). The results shows that the electrolyte metal cation Zn2+ can be coordinated with up to six H2O molecules in first shell, and this metal cation solvation structure contributes to the occurrence and formation of side reactions and by-products, which reduces the battery efficiency. Increasing the electrolyte anion Cl- concentration by appropriately increasing the C r helps to desolvate the metal cation cluster structure, which greatly improves the battery efficiency and suppresses the side reactions and by-products. Yet the improvement effect was not obviously further improved by further increasing the Cl- concentration.

Unveiling the Mysteries: Acetonitrile's Dance with Weakly-Solvating Electrolytes in Shaping Gas Evolution and Electrochemical Performance of Zinc-ion Batteries

Aqueous Zn-metal battery (AZMB) is a promising candidate for future large-scale energy storage with commendable capacity, exceptional safety characteristics, and low cost. Acetonitrile (AN) has been widely used as an effective electrolyte constituent to improve AZMBs' performance. However, its functioning mechanisms remain unclear. In this study, we unveiled the critical roles of AN in AZMBs via comparative in situ electrochemical, gaseous, and morphological analyses. Despite its limited ability to solvate Zn ions, AN-modulated Zn-ion solvation sheath with increased anions and decreased water achieves a weakly-solvating electrolyte. As a result, the Zn||Zn cell with AN addition exhibited 63 times longer cycle life than cell without AN and achieved a 4 Ah cm-2 accumulated capacity with no H2 generation. In V2O5||Zn cells, for the first time, AN suppressing CO2 generation, elevating CO2-initiation voltage from 2→2.44 V (H2: 2.43→2.55 V) was discovered. AN-impeded transit and Zn-side deposition of dissolved vanadium ions, known as "crosstalk," ameliorated inhomogeneous Zn deposition and dendritic Zn growth. At last, we demonstrated an AN-enabled high-areal-capacity AZMB (3.3 mAh cm-2) using high-mass-loading V2O5 cathode (26 mg cm-2). This study shed light on the strategy of constructing fast-desolvation electrolytes and offered insights for future electrolyte accommodation for high-voltage AZMB cathodes.

Dynamic Molecular Interphases Regulated by Trace Dual Electrolyte Additives for Ultralong-Lifespan and Dendrite-Free Zinc Metal Anode

Metallic zinc is a promising anode material for rechargeable aqueous multivalent metal-ion batteries due to its high capacity and low cost. However, the practical use is always beset by severe dendrite growth and parasitic side reactions occurring at anode/electrolyte interface. Here we demonstrate dynamic molecular interphases caused by trace dual electrolyte additives of D-mannose and sodium lignosulfonate for ultralong-lifespan and dendrite-free zinc anode. Triggered by plating and stripping electric fields, the D-mannose and lignosulfonate species are alternately and reversibly (de-)adsorbed on Zn metal, respectively, to accelerate Zn2+ transportation for uniform Zn nucleation and deposition and inhibit side reactions for high Coulombic efficiency. As a result, Zn anode in such dual-additive electrolyte exhibits highly reversible and dendrite-free Zn stripping/plating behaviors for >6400 hours at 1 mA cm-2, which enables long-term cycling stability of Zn||ZnxMnO2 full cell for more than 2000 cycles.

Chlorination Design for Highly Stable Electrolyte toward High Mass Loading and Long Cycle Life Sodium-Based Dual-Ion Battery

Sodium-based dual ion batteries (SDIBs) have garnered significant attention as novel energy storage devices offering the advantages of high-voltage and low-cost. Nonetheless, conventional electrolytes exhibit low resistance to oxidation and poor compatibility with electrode materials, resulting in rapid battery failure. In this study, for the first time, a chlorination design of electrolytes for SDIB, is proposed. Using ethyl methyl carbonate (EMC) as a representative, chlorine (Cl)-substituted EMC not only demonstrates increased oxidative stability ascribed to the electron-withdrawing characteristics of chlorine atom, electrolyte compatibility with both the cathode and anode is also greatly improved by forming Cl-containing interface layers. Consequently, a discharge capacity of 104.6 mAh g-1 within a voltage range of 3.0-5.0 V is achieved for Na||graphite SDIB that employs a high graphite cathode mass loading of 5.0 mg cm-2, along with almost no capacity decay after 900 cycles. Notably, the Na||graphite SDIB can be revived for an additional 900 cycles through the replacement of a fresh Na anode. As the mass loading of graphite cathode increased to 10 mg cm-2, Na||graphite SDIB is still capable of sustaining over 700 times with ≈100% capacity retention. These results mark the best outcome among reported SDIBs. This study corroborates the effectiveness of chlorination design in developing high-voltage electrolytes and attaining enduring cycle stability of Na-based energy storage devices.

Ethylene Glycol-Choline Chloride Based Hydrated Deep Eutectic Electrolytes Enabled High-Performance Zinc-Ion Battery

Aqueous rechargeable zinc-ion batteries (ARZIBs) are considered as an emerging energy storage technology owing to their low cost, inherent safety, and reasonable energy density. However, significant challenges associated with electrodes, and aqueous electrolytes restrict their rapid development. Herein, ethylene glycol-choline chloride (Eg-ChCl) based hydrated deep-eutectic electrolytes (HDEEs) are proposed for RZIBs. Also, a novel V10O24·nH2O@rGO composite is prepared and investigated in combination with HDEEs. The formulated HDEEs, particularly the composition of 1 ml of EG, 0.5 g of ChCl, 4 ml of H2O, and 2 M ZnTFS (1-0.5-4-2 HDEE), not only exhibit the lowest viscosity, highest Zn2+ conductivity (20.38 mS cm-1), and the highest zinc (Zn) transference number (t+ = 0.937), but also provide a wide electrochemical stability window (>3.2 V vs ZnǁZn2+) and enabledendrite-free Zn stripping/plating cycling over 1000 hours. The resulting ZnǁV10O24·nH2O@rGO cell with 1-0.5-4-2 HDEE manifests high reversible capacity of ≈365 mAh g-1 at 0.1 A g-1, high rate-performance (delivered ≈365/223 mAh g-1 at 0.1/10 mA g-1) and enhanced cycling performance (≈63.10% capacity retention in the 4000th cycle at 10 A g-1). Furthermore, 1-0.5-4-2 HDEE support feasible Zn-ion storage performance across a wide temperature range (0-80 °C) FInally, a ZnǁV10O24·nH2O@rGO pouch-cell prototype fabricated with 1-0.5-4-2 HDEE demonstrates good flexibility, safety, and durability.

Multifunctional Cellulose Nanocrystals Electrolyte Additive Enable Ultrahigh-Rate and Dendrite-Free Zn Anodes for Rechargeable Aqueous Zinc Batteries

The design of aqueous zinc (Zn) chemistry energy storage with high rate-capability and long serving life is a great challenge due to its inhospitable coordination environment and dismal interfacial chemistry. To bridge this big gap, herein, we build a highly reversible aqueous Zn battery by taking advantages of the biomass-derived cellulose nanocrystals (CNCs) electrolyte additive with unique physical and chemical characteristics simultaneously. The CNCs additive not only serves as fast ion carriers for enhancing Zn2+ transport kinetics but regulates the coordination environment and interface chemistry to form dynamic and self-repairing protective interphase, resulting in building ultra-stable Zn anodes under extreme conditions. As a result, the engineered electrolyte system achieves a superior average coulombic efficiency of 97.27 % under 140 mA cm-2, and steady charge-discharge for 982 h under 50 mA cm-2, 50 mAh cm-2, which proposes a universal pathway to challenge aqueous Zn chemistry in green, sustainable, and large-scale applications.

Ether-Water Co-Solvent Electrolytes Enhanced Vanadium Oxide Cathode Cyclic Behaviors for Zinc Batteries

Vanadium-based compounds are fantastic cathodes for aqueous zinc metal batteries due to the high specific capacity and excellent rate capability. Nevertheless, the practical application has been hampered by the dissolution of vanadium in traditional aqueous electrolytes owing to the strong polarity of water molecules. Herein, we propose a hybrid electrolyte made of Zn(ClO4)2 salt in tetraethylene glycol dimethyl ether (G4) and H2O solvents to upgrade the cycle life of Zn//K0.486V2O5 battery. The G4 jointly solvates with Zn2+ ions and replaces a portion of the H2O molecules in the Zn2+ solvation sheath. It forms a strong bond with H2O, reducing its activity, and significantly inhibiting vanadium dissolution and water-induced parasitic reaction. Consequently, the optimized electrolyte with H2O and G4 volume ratio of 5 : 5 enhances the cycling stability of Zn//K0.486V2O5 battery, enabling it to reach up to 600 cycles. In addition, the battery demonstrates a satisfactory reversible capacity of 475.7 mAh g-1 and excellent rate performance attributed to the moderate ionic conductivity (28.8 mS cm-1) of the hybrid electrolyte. Last but not least, in the optimized electrolyte, the symmetric Zn//Zn cells deliver a long cycling performance of 400 h, while the asymmetric Zn//Cu cells shows a high average coulombic efficiency of 97.4 %.

Unlocking the Effect of Chain Length and Terminal Group on Ethylene Glycol Ether Family Toward Advanced Aqueous Electrolytes

Constructing high-performance hybrid electrolyte is important to advanced aqueous electrochemical energy storage devices. However, due to the lack of in-depth understanding of how the molecule structures of cosolvent additives influence the properties of electrolytes significantly impeded the development of hybrid electrolytes. Herein, a series of hybrid electrolytes are prepared by using ethylene glycol ether with different chain lengths and terminal groups as additives. The optimized 2 m LiTFSI-90%DDm hybrid electrolyte prepared from diethylene glycol dimethyl ether (DDm) molecule showcases excellent comprehensive performance and significantly enhances the operating voltage of supercapacitors (SCs) to 2.5 V by suppressing the activity of water. Moreover, the SC with 2 m LiTFSI-90%DDm hybrid electrolyte supplies a long-term cycling life of 50 000 cycles at 1 A g-1 with 92.3% capacitance retention as well as excellent low temperature (-40 ºC) cycling performance (10 000 times at 0.2 A g-1). Universally, Zn//polyaniline full cell with 2 m Zn(OTf)2-90%DDm electrolyte manifests outstanding cycling performance in terms of 77.9% capacity retention after 2,000 cycles and a dendrite-free Zn anode. This work inspires new thinking of developing advanced hybrid electrolytes by cosolvent molecule design toward high-performance energy storage devices.

Synergistic Cation-π Interactions and PEDOT-Based Protective Double-Layer for High Performance Zinc Anode

Ensuring effective and controlled zinc ion transportation is crucial for functionality of the solid electrolyte interphase (SEI) and overall performance in zinc-based battery systems. Herein the first-ever demonstration of incorporate cation-π interactions are provided in the SEI to effectively facilitate uniform zinc ion flux. The artificial SEI design involves the immobilization of 4-amino-p-terphenyl (TPA), a strong amphiphilic cation-π interaction donor, as a monolayer onto a conductive poly(3,4-ethylenedioxythiophene) (PEDOT) matrix, which enable the establishment of a robust network of cation-π interactions. Through a carefully-designed interfacial polymerization process, a high-quality, large-area, robust is achieved, thin polymeric TPA/PEDOT (TP) film for the use of artificial SEI. Consequently, this interphase exhibits exceptional cycling stability with low overpotential and enables high reversibility of Zn plating/stripping. Symmetrical cells with TP/Zn electrodes can be cycled for more than 3200 hours at 1 mA cm-2 and 1 mAh cm-2 . And the asymmetric cells can cycle 3000 cycles stably with a high Coulomb efficiency of 99.78%. Also, under the extreme conditions of lean electrolyte and low N/P ratio, the battery with TP protective layer can still achieve ultra-stable cycle.

Tailoring vanadium oxide crystal orientation for high-performance aqueous zinc-ion batteries

Due to the increasing demand for higher security and low-cost energy storage systems, the main research focus has been developing a suitable substitute for lithium-ion batteries. Aqueous zinc ion batteries (AZIBs) are considered the best alternative to lithium-ion batteries in large-scale energy storage devices. Owing to its high capacity, vanadate is a promising cathode material for AZIBs. The crystallographic orientation of cathode materials dramatically influences the rate performance and cycling life. Here, Mg0.57V5O12·2.3H2O (MgVO) with favorable (001) crystal orientation and significantly improved electrochemical performance is prepared by a simple stirring method. The crystal growth orientations of MgVO are altered by adjusting the aging time of the reactant solution. The (001)-orientated grain growth of MgVO delivers a 232.5 mA h g-1 capacity at 5 A g-1 with a 94% capacity retention rate after 1400 cycles. The zinc ion storage performance of MgVO demonstrates that the orientation-controlled method can design effective cathode materials for high-performance ZIBs.

Competitive Coordination Structure Regulation in Deep Eutectic Electrolyte for Stable Zinc Batteries

Rechargeable zinc-based batteries are finding their niche in energy storage applications where cost, safety, scalability matter, yet they are plagued by rapid performance degradation due to the lack of suitable electrolytes to stabilize Zn anode. Herein, we report a competitive coordination structure to form unique quaternary hydrated eutectic electrolyte with ligand-cation-anion cluster. Unraveled by experiment and calculation results, the competing component can enter initial primary coordination shell of Zn2+ ion, partially substituting Lewis basic eutectic ligands and reinforcing cation-anion interaction. The hydration-deficient complexes induced between competing eutectic as hydrogen bond donor-accepter and water also broaden the electrochemical window and confine free water activity. The altered coordination further leads to robust hybrid organic-inorganic enriched solid electrolyte interphase, enabling passivated surface and suppressed dendrite growth. Noticeably, stable Zn plating/stripping for 8000 cycles with high Coulombic efficiencies of 99.6 % and long cycling life of 10000 cycles for Zn-organic batteries are obtained. Even under harsh conditions (small N/P ratio, low temperature), the profits brought by the competitive eutectic electrolyte are still very prominent. This design principle leveraged by eutectic electrolytes with competitive coordination offers a new approach to improve battery performance.

Rotational dynamics, ionic conductivity, and glass formation in a ZnCl2-based deep eutectic solvent

Glass formation and reorientational motions are widespread but often-neglected features of deep eutectic solvents although both can be relevant for the technically important ionic conductivity at room temperature. Here, we investigate these properties for two mixtures of ethylene glycol and ZnCl2, which were recently considered superior electrolyte materials for application in zinc-ion batteries. For this purpose, we employed dielectric spectroscopy performed in a broad temperature range, extending from the supercooled state at low temperatures up to the liquid phase around room temperature and beyond. We find evidence for a relaxation process arising from dipolar reorientation dynamics, which reveals the clear signatures of glassy freezing. This freezing also governs the temperature dependence of the ionic dc conductivity. We compare the obtained results with those for deep eutectic solvents that are formed by the same hydrogen-bond donor, ethylene glycol, but by two different salts, choline chloride and lithium triflate. The four materials reveal significantly different ionic and reorientational dynamics. Moreover, we find varying degrees of decoupling of rotational dipolar and translational ionic motions, which can partly be described by a fractional Debye-Stokes-Einstein relation. The typical glass-forming properties of these solvents strongly affect their room-temperature conductivity.

Acetamide-Caprolactam Deep Eutectic Solvent-Based Electrolyte for Stable Zn-Metal Batteries

Aqueous Zn-ion batteries (AZIBs) are promising for grid-scale energy storage. However, conventional AZIBs face challenges including hydrogen evolution reaction (HER), leading to high local pH, and by-product formation on the anode. Hereby the hydrogen bonds in the aqueous electrolyte are reconstructed by using a deep eutectic co-solvent (DES) made of acetamide (H-bond donor) and caprolactam (H-bond acceptor), which effectively suppresses the reactivity of water and broadens the electrochemical voltage stability window. The coordination between Zn2+ and acetamide-caprolactam in DES-based electrolytes produces a unique solvation structure that promotes the preferential growth of Zn crystals along the (002) plane. This will inhibit the formation of Zn dendrites and ensure the uniform deposition of Zn-ions on the anode surface. In addition, it is found that this DES-based electrolyte can form a protective membrane on the anode surface, reducing the risks of Zn corrosion. Compared to conventional electrolytes, the DES-based electrolyte shows a long-term stable plating/stripping performance with a significantly improved Coulombic efficiency from 78.18% to 98.37%. It is further demonstrated that a Zn||VS2 full-cell with the DES-based electrolyte exhibits enhanced stability after 500 cycles with 85.4% capacity retention at 0.5 A g-1 .

Mediating Triple Ions Migration Behavior via a Fluorinated Separator Interface toward Highly Reversible Aqueous Zn Batteries

Rampant dendrite growth, electrode passivation and severe corrosion originate from the uncontrolled ions migration behavior of Zn2+ , SO4 2- , and H+ , which are largely compromising the aqueous zinc ion batteries (AZIBs) performance. Exploring the ultimate strategy to eliminate all the Zn anode issues is challenging but urgent at present. Herein, a fluorinated separator interface (PVDF@GF) is constructed simply by grafting the polyvinylidene difluoride (PVDF) on the GF surface to realize high-performance AZIBs. Experimental and theoretical studies reveal that the strong interaction between C─F bonds in the PVDF and Zn2+ ions enables evenly redistributed Zn2+ ions concentration at the electrode interface and accelerates the Zn transportation kinetics, leading to homogeneous and fast Zn deposition. Furthermore, the electronegative separator interface can spontaneously repel the SO4 2- and anchor H+ ions to alleviate the passivation and corrosion. Accordingly, the Zn|Zn symmetric cell with PVDF@GF harvests a superior cycling stability of 500 h at 10 mAh cm-2 , and the Zn|VOX full cell delivers 76.8% capacity retention after 1000 cycles at 2 A g-1 . This work offers an all-round solution and provides new insights for the design of advanced separators with ionic sieve function toward stable and reversible Zn metal anode chemistry.

Interface regulation of the Zn anode by using a low concentration electrolyte additive for aqueous Zn batteries

The Zn metal anode in aqueous Zn batteries faces a number of challenges including instable deposition and corrosion issues. Here, we present an interface environment regulation for a Zn electrode with a low concentration electrolyte additive of 0.1 m 3-aminobenzenesulfonic acid (ASA). ASA prefers to adsorb on the Zn surface over water and creates an ASA-rich interface. It further enters the Zn2+ solvation sheath locally, which shifts the lowest unoccupied molecular orbital from solvated water to ASA. The hydrogen evolution reaction from solvated water reduction is inhibited, and the reduction of solvated ASA generates a stable solid-electrolyte interphase composed of the ion conductor ZnS covered by organic-inorganic mixed components. With the resulting homogenized Zn deposition, continuous Zn stripping in symmetric cells reaches 99.7% depth of discharge (DOD) at a current density of 2 mA cm-2, whereas cell short-circuit takes place at 11.4% DOD in the ASA free ZnSO4 electrolyte. The repeated stripping/plating also realizes 1100 h cycle life at 2 mA cm-2, and a 99.54% stabilized coulombic efficiency is obtained for 500 cycles at 10 mA cm-2.

Hydrated Eutectic Electrolyte Induced Bilayer Interphase for High-Performance Aqueous Zn-Ion Batteries with 100 °C Wide-Temperature Range

The practical implementation of aqueous zinc-ion batteries (AZIBs) encounters challenges such as dendrite growth, parasitic reactions, and severe decay in battery performance under harsh environments. Here, a novel hydrated eutectic electrolyte (HEE) composed of Zn(ClO4 )2 ·6H2 O, ethylene glycol (EG), and InCl3 solution is introduced to effectively extend the lifespan of AZIBs over a wide temperature range from -50 to 50 °C. Molecular dynamics simulations and spectroscopy analysis demonstrate that the H2 O molecules are confined within the liquid eutectic network through dual-interaction, involving coordination with Zn2+ and hydrogen bonding with EG, thus weakening the activity of free water and extending the electrochemical window. Importantly, cryo-transmission electron microscopy and spectroscopy techniques reveal that HEE in situ forms a zincophobic/zincophilic bilayer interphase by the dissociation-reduction of eutectic molecules. Specifically, the zincophilic interphase reduces the energy barrier for Zn nucleation, promoting uniform Zn deposition, while the zincophobic interphase prevents active water from contacting the Zn surface, thus inhibiting the side reactions. Furthermore, the relationships between the structural evolution of the liquid eutectic network and interfacial chemistry at electrode/electrolyte interphase are further discussed in this work. The scalability of this design strategy can bring benefits to AZIBs operating over a wide temperature range.

Constructing Solid Electrolyte Interphase for Aqueous Zinc Batteries

Problems of zinc anode including dendrite and hydrogen evolution seriously degrade the performance of zinc batteries. Solid electrolyte interphase (SEI), which plays a key role in achieving high reversibility of lithium anode in aprotic organic solvent, is also beneficial to performance improvement of zinc anode in aqueous electrolyte. However, various studies about interphase for zinc electrode is quite fragmented, and lack of deep understanding on root causes or general design rules for SEI construction. And water molecules with high reactivity brings serious challenge to the effective SEI construction. Here, we reviewed the brief development history of zinc batteries firstly, then summarized the approaches to construct SEI in aqueous electrolyte. Furthermore, the formation mechanisms behind approaches are systematically analyzed, together with discussion on the SEI components and evaluation on electrochemical performance of zinc anode with various types of SEI. Meanwhile, the challenge between lab and industrialization are also discussed.

Critical triple roles of sodium iodide in tailoring the solventized structure, anode-electrolyte interface and crystal plane growth to achieve highly reversible zinc anodes for aqueous zinc-ion batteries

Aqueous rechargeable Zn-ion batteries (ARZIBs) are promising for energy storage. However, the Zn dendrite and corrosive reactions on the surface of Zn anode limit the practical uses of ARZIBs. Herein, we present a valid electrolyte additive of NaI, in which I- can modulate the morphology of Zn crystal growth by adsorbing on specific crystal surfaces (002), and guide Zn deposition by inducing a negative charge on the Zn anode. Simultaneously, it enhances the reduction stability of water molecules by participating in the solvation structure of Zn(H2O)62+ by forming ZnI(H2O)5+. At 10 mA cm-2, the assembled Zn symmetrical batteries can run stably over 1,100 h, and the depth of discharge (DOD) can reach 51.3 %. At 1 A g-1, the VO2||Zn full-cell in 2 M ZnCl2 electrolyte with 0.4 M NaI (2 M ZnCl2-0.4 M NaI) maintains of the capacity retention of 75.7 % over 300 cycles. This work offers an insight into inorganic anions as electrolyte additives for achieving stable zinc anodes of ARZIBs.

Strong Replaces Weak: Design of H-Bond Interactions Enables Cryogenic Aqueous Zn Metal Batteries

Despite the numerous advantages of aqueous Zn batteries, their practical application under cryogenic conditions is hindered by the freezing of the electrolyte because the abundance of hydrogen bonds (H-bonds) between H2O molecules drives the aqueous system to transform to an orderly frozen structure. Here, a design of H-bond interactions based on the guiding ideology of "strong replaces weak" is proposed. The strong H-bonds formed between introduced eutectic components and water molecules break down the weak H-bonds in the original water molecule network, which contributes to an ultralow freezing point and a high ionic conductivity of 1.7 mS cm-1 at -40 °C. Based on multiperspective theoretical simulations and tailor-made in situ cooling Raman characterizations, it has been demonstrated that substituting weak H-bonds with strong H-bonds facilitates the structural reshaping of Zn2+ solvation and remodeling of the H-bond network in the electrolyte. Endowed with this advantage, reversible and stable Zn plating/stripping behaviors could be realized at -40 °C, and the full cells display a high discharge capacity (200 mA h g-1) at -40 °C with ∼75% capacity retention after 1000 cycles. This study will expand the design philosophy of antifreezing aqueous electrolytes and provide a perspective to promote the adoption of Zn metal batteries for cryogenic environment large-scale energy storage.

Reviving Zn0 Dendrites to Electroactive Zn2+ by Mesoporous MXene with Active Edge Sites

Zinc metal-based aqueous batteries (ZABs) offer a sustainable, affordable, and safe energy storage alternative to lithium, yet inevitable dendrite formation impedes their wide use, especially under long-term and high-rate cycles. How the battery can survive after dendrite formation remains an open question. Here, we pivot from conventional Zn dendrite growth suppression strategies, introducing proactive dendrite-digesting chemistry via a mesoporous Ti3C2 MXene (MesoTi3C2)-wrapped polypropylene separator. Spectroscopic characterizations and electrochemical evaluation demonstrate that MesoTi3C2, acting as an oxidant, can revive the formed dead Zn0 dendrites into electroactive Zn2+ ions through a spontaneous redox process. Density functional theory reveals that the abundant edge-Ti-O sites in our MesoTi3C2 facilitate high oxidizability and electron transfer from Zn0 dendrites compared to their in-plane counterparts. The resultant asymmetrical cell demonstrates remarkable ultralong cycle life of 2200 h at a practical current of 5 mA cm-2 with a low overpotential (<50 mV). The study reveals the unexpected edge effect of mesoporous MXenes and uncovers a new proactive dendrite-digesting chemistry to survive ZABs, albeit with inevitable dendrite formation.

Wide-Potential-Window Bimetallic Hydrated Eutectic Electrolytes with High-Temperature Resistance for Zinc-Ion Hybrid Capacitors

Aqueous zinc-ion hybrid capacitors (ZHCs) are considered ideal energy-storage devices. However, the common aqueous Zn2+ -containing electrolytes used in ZHCs often cause parasitic reactions during charging-discharging owing to free water molecules. Hydrated eutectic electrolytes (HEEs) that bind water molecules through solvation shells and hydrogen bonds can be applied at high temperatures and within a wide potential window. This study reports a novel bimetallic HEE (ZnK-HEE), consisting of zinc chloride, potassium chloride, ethylene glycol, and water, which enhances the capacity and electrochemical reaction kinetics of ZHCs. The bimetallic solvation shell in ZnK-HEE is studied by molecular dynamics and density functional theory, confirming its low step-by-step desolvation energy. A Zn//activated carbon ZHC in ZnK-HEE shows a high operating voltage of 2.1 V, along with an ultrahigh capacity of 326.9 mAh g-1 , power density of 2099.7 W kg-1 , and energy density of 343.2 Wh kg-1 at 100 °C. The reaction mechanisms of charging-discharging process are investigated by ex situ X-ray diffraction. This study reports a promising electrolyte for high-performance ZHCs, which exhibits high-temperature resistance and is operable within a wide potential window.

Molecular recognition effect enabled by novel crown ether as macrocyclic host towards highly reversible Zn anode

Aqueous Zn2+ ion batteries present notable advantages, including high abundance, low toxicity, and intrinsic nonflammability. However, they exhibit severe irreversibility due to uncontrolled dendrite growth and corrosion reactions, which limit their practical applications. Inspired by their distinct molecular recognition characteristics, supramolecular crown ethers featuring interior cavity sizes identical to the diameter of Zn2+ ions were screened as macrocyclic hosts to optimize the Zn2+ coordination environment, facilitating the suppression of the reactivity of H2O molecules and inducing the in-situ formation of organic-inorganic hybrid dual-protective interphase. The in-situ assembled interphase confers the system with an "ion-sieving" effect to repel H2O molecules and facilitate rapid Zn2+ transport, enabling the suppression of side reactions and uniform deposition of Zn2+ ions. Consequently, we were able to achieve dendrite-free Zn2+ plating/stripping at 98.4% Coulombic efficiency for approximately 300 cycles in Zn||Cu cell, steady charge-discharge for 1360 h in Zn||Zn symmetric cell, and improved cyclability of 70% retention for 200 cycles in Zn||LMO full cell, outlining a promising strategy to challenge lithium-ion batteries in low-cost, and large-scale applications.

Salting-Out Effect Realizing High-Strength and Dendrite-Inhibiting Cellulose Hydrogel Electrolyte for Durable Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries are limited by poor Zn stripping/plating reversibility. Not only can hydrogel electrolytes address this issue, but also they are suitable for constructing flexible batteries. However, there exists a contradiction between the mechanical strength and the ionic conductivity for hydrogel electrolytes. Herein, high-concentration kosmotropic ions are introduced into the cellulose hydrogel electrolyte to take advantage of the salting-out effect. This can significantly improve both the mechanical strength and ionic conductivity. Additionally, the obtained cellulose hydrogel electrolyte (denoted as Con-CMC) has strong adhesion, a wide electrochemical stability window, and good water retaining ability. The Con-CMC is also found to accelerate the desolvation process, improve Zn deposition kinetics, promote Zn deposition along the (002) plane, and suppress parasitic reactions. Accordingly, the Zn/Zn cell with Con-CMC demonstrates dendrite-free behavior with prolonged lifespan and can endure extremely large areal capacity of 25 mAh cm-2. The Con-CMC also enables a large average Coulombic efficiency of 99.54% over 500 cycles for the Zn/Cu cell. Furthermore, the assembled pouch-type Zn/polyaniline full battery provides great rate capability, superior cyclability (even with limited Zn anode excess), a slow self-discharge rate, and outstanding affordability to external forces. Overall, this work extends our knowledge of the rational design of hydrogel electrolytes.

Low-cost and Non-flammable Eutectic Electrolytes for Advanced Zn-I2 Batteries

As a burgeoning electrolyte system, eutectic electrolytes based on ZnCl2 /Zn(CF3 SO3 )2 /Zn(TFSI)2 have been widely proposed in advanced Zn-I2 batteries; however, safety and cost concerns significantly limit their applications. Here, we report new-type ZnSO4 -based eutectic electrolytes that are both safe and cost-effective. Their universality is evident in various solvents of polyhydric alcohols, in which multiple -OH groups not only involve in Zn2+ solvation but also interact with water, resulting in the high stability of electrolytes. Taking propylene glycol-based hydrated eutectic electrolyte as an example, it features significant advantages in non-flammability and low price that is <1/200 cost of Zn(CF3 SO3 )2 /Zn(TFSI)2 -based eutectic electrolytes. Moreover, its effectiveness in confining the shuttle effects of I2 cathode and side reactions of Zn anodes is evidenced, resulting in Zn-I2 cells with high reversibility at 1 C and 91.4 % capacity remaining under 20 C. After scaling up to the pouch cell with a record mass loading of 33.3 mg cm-2 , super-high-capacity retention of 96.7 % is achieved after 500 cycles, which exceeds other aqueous counterparts. This work significantly broadens the eutectic electrolyte family for advanced Zn battery design.

Manipulating the Solvation Structure and Interface via a Bio-Based Green Additive for Highly Stable Zn Metal Anode

The practical application of aqueous zinc-ion batteries (AZIBs) is limited by serious side reactions, such as the hydrogen evolution reaction and Zn dendrite growth. Here, the study proposes a novel adoption of a biodegradable electrolyte additive, γ-Valerolactone (GVL), with only 1 vol.% addition (GVL-to-H2 O volume ratio) to enable a stable Zn metal anode. The combination of experimental characterizations and theoretical calculations verifies that the green GVL additive can competitively engage the solvated structure of Zn2+ via replacing a H2 O molecule from [Zn(H2 O)6 ]2+ , which can efficiently reduce the reactivity of water and inhibit the subsequent side reactions. Additionally, GVL molecules are preferentially adsorbed on the surface of Zn to regulate the uniform Zn deposition and suppress the Zn dendrite growth. Consequently, the Zn anode exhibits boosted stability with ultralong cycle lifespan (over 3500 h) and high reversibility with 99.69% Coulombic efficiency. The Zn||MnO2 full batteries with ZnSO4 -GVL electrolyte show a high capacity of 219 mAh g-1 at 0.5 A g-1 and improved capacity retention of 78% after 550 cycles. This work provides inspiration on bio-based electrolyte additives for aqueous battery chemistry and promotes the practical application of AZIBs.

Recent Advances in Structural Optimization and Surface Modification on Current Collectors for High-Performance Zinc Anode: Principles, Strategies, and Challenges

The last several years have witnessed the prosperous development of zinc-ion batteries (ZIBs), which are considered as a promising competitor of energy storage systems thanks to their low cost and high safety. However, the reversibility and availability of this system are blighted by problems such as uncontrollable dendritic growth, hydrogen evolution, and corrosion passivation on anode side. A functionally and structurally well-designed anode current collectors (CCs) is believed as a viable solution for those problems, with a lack of summarization according to its working mechanisms. Herein, this review focuses on the challenges of zinc anode and the mechanisms of modified anode CCs, which can be divided into zincophilic modification, structural design, and steering the preferred crystal facet orientation. The possible prospects and directions on zinc anode research and design are proposed at the end to hopefully promote the practical application of ZIBs.

Air-Stable Binary Hydrated Eutectic Electrolytes with Unique Solvation Structure for Rechargeable Aluminum-Ion Batteries

Aluminum-ion batteries (AIBs) have been highlighted as a potential alternative to lithium-ion batteries for large-scale energy storage due to the abundant reserve, light weight, low cost, and good safety of Al. However, the development of AIBs faces challenges due to the usage of AlCl3-based ionic liquid electrolytes, which are expensive, corrosive, and sensitive to humidity. Here, we develop a low-cost, non-corrosive, and air-stable hydrated eutectic electrolyte composed of aluminum perchlorate nonahydrate and methylurea (MU) ligand. Through optimizing the molar ratio to achieve the unique solvation structure, the formed Al(ClO4)3·9H2O/MU hydrated deep eutectic electrolyte (AMHEE) with an average coordination number of 2.4 can facilely realize stable and reversible deposition/stripping of Al. When combining with vanadium oxide nanorods positive electrode, the Al-ion full battery delivers a high discharge capacity of 320 mAh g-1 with good capacity retention. The unique solvation structure with a low desolvation energy of the AMHEE enables Al3+ insertion/extraction during charge/discharge processes, which is evidenced by in situ synchrotron radiation X-ray diffraction. This work opens a new pathway of developing low-cost, safe, environmentally friendly and high-performance electrolytes for practical and sustainable AIBs.

Weak solvent chemistry enables stable aqueous zinc metal batteries over a wide temperature range from -50 to 80 °C

The development of electrolytes with a wide temperature range, no dendrite growth and corrosion resistance is essential for the practical application of aqueous zinc metal batteries. Herein, γ-valerolactone is developed as the co-solvent to extend the operating temperature range of the aqueous electrolyte and stabilize the zinc metal anode interface. This weak solvent acts as a strong hydrogen bonding ligand and "diluent" to break the hydrogen bonds between free water molecules, thus enhancing the temperature tolerance and chemical stability of the electrolyte. The γ-valerolactone can also be adsorbed on the anode surface to achieve a dendrite-free zinc deposition behavior by promoting zinc nucleation and regulating zinc growth texture. The optimized electrolyte enables the symmetric cell to deliver a cycle/rest life of 2160 h and operate stably over a wide temperature range of -50 to 80 °C. The corresponding Zn||AC and Zn||PANI cells exhibit capacity retention of 92.5% and 85% after 8100 and 1600 cycles, respectively. This mechanism of weak solvent-regulated hydrogen bonding and solvent sheath provides new insights into the design of advanced aqueous electrolytes.

Electrolyte and Additive Engineering for Zn Anode Interfacial Regulation in Aqueous Zinc Batteries

Aqueous Zn-metal batteries (AZMBs) have gained great interest due to their low cost, eco-friendliness, and inherent safety, which serve as a promising complement to the existing metal-based batteries, e.g., lithium-metal batteries and sodium-metal batteries. Although the utilization of aqueous electrolytes and Zn metal anode in AZMBs ensures their improved safety over other metal batteries meanwhile guaranteeing their decent energy density at the cell level, plenty of challenges involved with metallic Zn anode still await to be addressed, including dendrite growth, hydrogen evolution reaction, and zinc corrosion and passivation. In the past years, several attempts have been adopted to address these problems, among which engineering the aqueous electrolytes and additives is regarded as a facile and promising approach. In this review, a comprehensive summary of aqueous electrolytes and electrolyte additives will be given based on the recent literature, aiming at providing a fundamental understanding of the challenges associated with the metallic Zn anode in aqueous electrolytes, meanwhile offering a guideline for the electrolytes and additives engineering strategies toward stable AZMBs in the future.

Synergetic modulation on ionic association and solvation structure by electron-withdrawing effect for aqueous zinc-ion batteries

Aqueous zinc-ion batteries are emerging as one of the most promising large-scale energy storage systems due to their low cost and high safety. However, Zn anodes often encounter the problems of Zn dendrite growth, hydrogen evolution reaction, and formation of by-products. Herein, we developed the low ionic association electrolytes (LIAEs) by introducing 2, 2, 2-trifluoroethanol (TFE) into 30 m ZnCl2 electrolyte. Owing to the electron-withdrawing effect of -CF3 groups in TFE molecules, in LIAEs, the Zn2+ solvation structures convert from larger aggregate clusters into smaller parts and TFE will construct H-bonds with H2O in Zn2+ solvation structure simultaneously. Consequently, ionic migration kinetics are significantly enhanced and the ionization of solvated H2O is effectively suppressed in LIAEs. As a result, Zn anodes in LIAE display a fast plating/stripping kinetics and high Coulombic efficiency of 99.74%. The corresponding full batteries exhibit an improved comprehensive performance such as high-rate capability and long cycling life.

Biocompatible zinc battery with programmable electro-cross-linked electrolyte

Aqueous zinc batteries (ZBs) attract increasing attention for potential applications in modern wearable and implantable devices due to their safety and stability. However, challenges associated with biosafety designs and the intrinsic electrochemistry of ZBs emerge when moving to practice, especially for biomedical devices. Here, we propose a green and programmable electro-cross-linking strategy to in situ prepare a multi-layer hierarchical Zn-alginate polymer electrolyte (Zn-Alg) via the superionic binds between the carboxylate groups and Zn²⁺. Consequently, the Zn-Alg electrolyte provides high reversibility of 99.65% Coulombic efficiency (CE), >500 h of long-time stability and high biocompatibility (no damage to gastric and duodenal mucosa) in the body. A wire-shaped Zn/Zn-Alg/α-MnO₂ full battery affords 95% capacity retention after 100 cycles at 1 A g^-1 and good flexibility. The new strategy has three prominent advantages over the conventional methods: (i) the cross-linking process for the synthesis of electrolytes avoids the introduction of any chemical reagents or initiators; (ii) a highly reversible Zn battery is easily provided from a micrometer to large scales through automatic programmable functions; and (iii) high biocompatibility is capable of implanted and bio-integrated devices to ensure body safety.

Addition of Dioxane in Electrolyte Promotes (002)-Textured Zinc Growth and Suppressed Side Reactions in Zinc-Ion Batteries

The reversibility and cyclability of aqueous zinc-ion batteries (ZIBs) are largely determined by the stabilization of the Zn anode. Therefore, a stable anode/electrolyte interface capable of inhibiting dendrites and side reactions is crucial for high-performing ZIBs. In this study, we investigated the adsorption of 1,4-dioxane (DX) to promote the exposure of Zn (002) facets and prevent dendrite growth. DX appears to reside at the interface and suppress the detrimental side reactions. ZIBs with the addition of DX demonstrated a long-term cycling stability of 1000 h in harsh conditions of 10 mA cm^-2 with an ultrahigh cumulative plated capacity of 5 Ah cm^-2 and shows a good reversibility with an average Coulombic efficiency of 99.7%. The Zn//NH₄V₄O₁₀ full battery with DX achieves a high specific capacity (202 mAh g^-1 at 5 A g^-1) and capacity retention (90.6% after 5000 cycles), much better than that of ZIBs with the pristine ZnSO₄ electrolyte. By selectively adjusting the Zn²⁺ deposition rate on the crystal facets with adsorbed molecules, this work provides a promising modulation strategy at the molecular level for high-performing Zn anodes and can potentially be applied to other metal anodes suffering from instability and irreversibility.

One-Dimensional π-d Conjugated Conductive Metal-Organic Framework with Dual Redox-Active Sites for High-Capacity and Durable Cathodes for Aqueous Zinc Batteries

Aqueous Zn-based batteries (ZIBs) possess huge advantages in terms of high safety, low cost, and environmental friendliness. However, the lack of suitable cathodes with high-capacity, long-cycling, and high-rate capability limits their practical application. Herein, we present a highly crystalline one-dimensional π-d conjugated conductive metal-organic framework by coordinating ultrasmall 1,2,4,5-benzenetetramine (BTA) linkers with copper ions (Cu-BTA-H), as a cathode for ZIBs. The large ratio of active sites and dual redox mechanism of Cu-BTA-H, including the one-electron-redox reaction over copper ions (via Cu²⁺/Cu⁺) and the two-electron-redox reaction over organic ligands (via C═N/C-N), effectively enhance its reversible capacity. Meanwhile, the abundant porosity, small band gap, high crystallinity, and stable coordination structure of Cu-BTA-H endow it with fast ion/electron transport and effectively hinder the dissolution of organic ligands during cycling, respectively. Consequently, Cu-BTA-H possesses a high reversible capacity of 330 mAh g^-1 at 200 mA g^-1 and excellent rate performance and long-cycle stability, with a high capacity of 106.1 mAh g^-1 at 2.0 A g^-1 after 500 cycles and a high Coulombic efficiency of ∼100%. The proposed conductive MOFs with dual redox-active sites provide an efficient approach for constructing fast, stable, and high-capacity energy storage devices.

A Full-Device Autonomous Self-Healing Stretchable Soft Battery from Self-Bonded Eutectogels

Next-generation energy storage devices should be soft, stretchable, and self-healable. Previously reported self-healable batteries mostly possess limited stretchability and rely on healable electrodes or electrolytes rather than achieving full-device self-healability. Herein, an all-component self-bonding strategy is reported to obtain an all-eutectogel soft battery (AESB) that simultaneously achieves full-cell autonomous self-healability and omnidirectional intrinsic stretchability (>1000% areal strain) over a broad temperature range (-20~60 °C). Without requiring any external stimulus, the five-layered soft battery can efficiently recover both its mechanical and electrochemical performance at full-cell level. The developed AESB can be easily configured into various 3D architectures with highly interfacial compatible eutectogel electrodes, electrolyte, and substrate, presenting an excellent opportunity for the development of embodied energy technologies. The present work provides a general and user-friendly soft electronic material platform for fabricating a variety of intrinsic self-healing stretchable multi-layered electronics, which are promising beyond the field of energy storage, such as displays, sensors, circuits, and soft robots.