Room temperature ionic liquids as emerging solvents for the pretreatment of lignocellulosic biomass

Optimization of cost-effective enzymatic saccharification using low-cost protic ionic liquid as pretreatment agent in Agave bagasse

This work studied the optimization of enzymatic saccharification of Agave tequilana bagasse (ATB) pretreated with the low-cost protic ionic liquid (PIL) ethanolamine acetate ([EOA][OAc]) using the highly available and cost-effective mixture of the enzymatic cocktails Celluclast 1.5L-Viscozyme L. Response surface methodology (RSM) was employed to maximize the sugars concentration and yield. The RSM optimization conditions of the enzymatic saccharification of pretreated ATB that achieved the maximum reducing sugars (RS) concentration were: 11.50 % w/v solids loading, 4.26 pH with 0.76 and 1.86 mg protein/mL buffer of Viscozyme L and Celluclast 1.5L, respectively. Similarly, the conditions that maximize the sugar yield (SY) were solids loading of 5.62 % w/v, and 4.51 pH as well as 1.07 and 2.03 mg protein/mL buffer of Viscozyme L and Celluclast 1.5L, respectively. Saccharification performance of the first-generation and low-cost enzyme mixture Celluclast 1.5L-Viscozyme L was compared with that reached by a second-generation and higher-cost CTec2, where Celluclast 1.5L-Viscozyme L achieved 60.86 ± 2.66 % y 79.25 ± 3.34 % of the sugars released by CTec2 at the same hydrolysis time (12 h) for the sugar concentration and yield models, respectively. These results are encouraging since they positively contribute to cost reduction and availability issues, which are key parameters to consider when thinking about scaling-up the process.

Lignin Extraction by Using Two-Step Fractionation: A Review

Lignocellulosic biomass represents the most abundant renewable carbon source on earth and is already used for energy and biofuel production. The pivotal step in the conversion process involving lignocellulosic biomass is pretreatment, which aims to disrupt the lignocellulose matrix. For effective pretreatment, a comprehensive understanding of the intricate structure of lignocellulose and its compositional properties during component disintegration and subsequent conversion is essential. The presence of lignin-carbohydrate complexes and covalent interactions between them within the lignocellulosic matrix confers a distinctively labile nature to hemicellulose. Meanwhile, the recalcitrant characteristics of lignin pose challenges in the fractionation process, particularly during delignification. Delignification is a critical step that directly impacts the purity of lignin and facilitates the breakdown of bonds involving lignin and lignin-carbohydrate complexes surrounding cellulose. This article discusses a two-step fractionation approach for efficient lignin extraction, providing viable paths for lignin-based valorization described in the literature. This approach allows for the creation of individual process streams for each component, tailored to extract their corresponding compounds.

Acetylation in Ionic Liquids Dramatically Increases Yield in the Glycosyl Composition and Linkage Analysis of Insoluble and Acidic Polysaccharides

Glycosyl composition and linkage analyses are important first steps toward understanding the structural diversity and biological importance of polysaccharides. Failure to fully solubilize samples prior to analysis results in the generation of incomplete and poor-quality composition and linkage data by gas chromatography-mass spectrometry (GC-MS). Acidic polysaccharides also do not give accurate linkage results, because they are poorly soluble in DMSO and tend to undergo β-elimination during permethylation. Ionic liquids can solubilize polysaccharides, improving their derivatization and extraction for analysis. We show that water-insoluble polysaccharides become much more amenable to chemical analysis by first acetylating them in an ionic liquid. Once acetylated, these polysaccharides, having been deprived of their intermolecular hydrogen bonds, are hydrolyzed more readily for glycosyl composition analysis or methylated more efficiently for glycosyl linkage analysis. Acetylation in an ionic liquid greatly improves composition analysis of insoluble polysaccharides when compared to analysis without acetylation, enabling complete composition determination of normally recalcitrant polysaccharides. We also present a protocol for uronic acid linkage analysis that incorporates this preacetylation step. This protocol produces partially methylated alditol acetate derivatives in high yield with minimal β-elimination and gives sensitive linkage results for acidic polysaccharides that more accurately reflect the structures being analyzed. We use important plant polysaccharides to show that the preacetylation step leads to superior results compared to traditional methodologies.

Breakthrough of lignin valorization: A novel alcohol-dichoromethane binary mixture solvent for lignin dissolution with excellent properties

A novel binary solvent system consisting of alcohols (e.g., methanol, ethanol, isopropanol) and dichloromethane was developed as an efficient dissolution system for dissolving various types of lignin. It was found that in this dissolution system, adjusting the volume ratio of alcohol and dichloromethane will significantly affect the solubility of lignin. At the same time, this study proposed that the reason why the solvent can dissolve lignin was the hydrophobic skeleton and hydrophilic groups can be solvated by dichloromethane and alcohols respectively, which significantly promoted the dissolution of lignin. Furthermore, the solvent did not significantly alter the structure of the lignin. The proposed novel solvent is simple, efficient, versatile and flexible, can adapt to the high diversity of lignin, and has broad application prospects.

Systematic review on lignin valorization in the agro-food system: From sources to applications

Lignocellulosic biomass is the most abundant renewable resource on earth and currently most of this biomass is considered a low-value waste. Specifically, lignin is an underrated bioresource that is mostly burned for energy production and few value-added products have been created. Since the agro-food industry produces large amounts of wastes that can be potential sources of high-quality lignin, scientific efforts should be directed to this industry. Thus, this review provides a systematic overview of the trends and evolution of research on agro-food system-derived lignin (from 2010 to 2020), including the extraction of lignin from various agro-food sources and emergent applications of lignin in the agro-food chain. Crops with the highest average production/year (n = 26) were selected as potential lignin sources. The extraction process efficiency (yield) and lignin purity were used as indicators of the raw material potential. Overall, it is notable that research interest on agro-food lignin has increased exponentially over the years, both as source (567%) and application (128%). Wheat, sugarcane, and maize are the most studied sources and are the ones that render the highest lignin yields. As for the extraction methods used, alkaline and organosolv methods are the most employed (∼50%). The main reported applications are related to lignin incorporation in polymers (∼55%) and as antioxidant (∼24%). Studies on agro-food system-derived lignin is of most importance since there are numerous possible sources that are yet to be fully valorized and many promising applications that need to be further developed.

Applications of Ionic Liquids in Carboxylic Acids Separation

Ionic liquids (ILs) are considered a green viable organic solvent substitute for use in the extraction and purification of biosynthetic products (derived from biomass-solid/liquid extraction, or obtained through fermentation-liquid/liquid extraction). In this review, we analyzed the ionic liquids (greener alternative for volatile organic media in chemical separation processes) as solvents for extraction (physical and reactive) and pertraction (extraction and transport through liquid membranes) in the downstream part of organic acids production, focusing on current advances and future trends of ILs in the fields of promoting environmentally friendly products separation.

Energy-efficient glucose recovery from chestnut shell by optimization of NaOH pretreatment at room temperature and application to bioethanol production

Biofuel policies are currently being implemented globally to reduce greenhouse gas emissions. The recent European regulation, Renewable Energy Directive (RED) II, states that renewable resources should be used as raw materials. In this study, chestnut shell (CNS), a food processing residue, was utilized as a feedstock for bioethanol production. Statistical optimization was performed to improve biomass-to-glucose conversion (BtG) from the CNS. In order to design an energy-efficient process, the pretreatment was fixed at room temperature in the numerical optimization. The optimal conditions derived from the predicted model are as follows: temperature of 25 °C, reaction time of 2.8 h, and NaOH concentration of 1.9% (w/w). Under optimal conditions, both predicted and experimental BtG were 31.0%, while BtG was approximately 3.3-fold improved compared to the control group (without pretreatment). The recovered glucose was utilized for bioethanol fermentation by Saccharomyces cerevisiae K35 and the ethanol yield was achieved to be 98%. Finally, according to the mass balance based on 1000 g CNS, glucose of 310 g can be recovered by the pretreatment; the bioethanol production was approximately 155 g. This strategy suggests a direction to utilize CNS as a potential feedstock for biorefinery through the design of an economical and energy-efficient pretreatment process by lowering the reaction temperature to room temperature.

Synthesis of Polyanionic Cellulose Carbamates by Homogeneous Aminolysis in an Ionic Liquid/DMF Medium

Polyanionic cellulose carbamates were synthesized by rapid and efficient homogeneous aminolysis of cellulose carbonate half-esters in an ionic liquid/DMF medium. Cellulose bis-2,3-O-(3,5-dimethylphenyl carbamate), as a model compound, reacted with different chloroformates to cellulose carbonates. These intermediates were subjected to aminolysis, for which both the reactivity of different chloroformates towards C6-OH and the reactivity/suitability of the respective carbonate half-ester in the aminolysis were comprehensively studied. Phenyl chloroformate and 4-chlorophenyl chloroformate readily reacted with C6-OH of the model cellulose derivative, while 4-nitrophenyl chloroformate did not. The intermediate 4-chlorophenyl carbonate derivative with the highest DS (1.05) was then used to evaluate different aminolysis pathways, applying three different amines (propargyl amine, β-alanine, and taurine) as reactants. The latter two zwitterionic compounds are only sparingly soluble in pure DMF as the typical reaction medium for aminolysis; therefore, several alternative procedures were suggested, carefully evaluated, and critically compared. Solubility problems with β-alanine and taurine were overcome by the binary solvent system DMF/[EMIM]OAc (1:1, v/v), which was shown to be a promising medium for rapid and efficient homogeneous aminolysis and for the preparation of the corresponding cellulose carbamate derivatives or other compounds that are not accessible by conventional isocyanate chemistry. The zwitterionic cellulose carbamate derivatives presented in this work could be promising chiral cation exchangers for HPLC enantiomer separations.

Hydrothermal oxidative valorisation of lignin into functional chemicals: A review

Lignin is a waste by-product of bio-refineries and paper-pulp industries. It has an attractive potential to produce numerous valuable chemicals due to its highly aromatic character. At present, large amount of lignin is burnt as a source of energy due to lack of suitable efficient lignin valorisation processes. The challenge exists in handling its complex heterogeneous structure and bond breaking at selective locations. The production of high value chemicals/petrochemical feedstocks will improve the economic viability of a bio-refinery. Oxidative depolymerization is a promising way to produce functional compounds from lignin. The aim of the current review is to present the novel methodologies currently used in the area of lignin oxidative depolymerization including effect of temperature, residence time, solvent, oxidizing agents, homogeneous and heterogeneous catalysis etc. It aims to present an insight into the structure of lignin and its breakdown mechanism.

Self-assembly of cellulose for creating green materials with tailor-made nanostructures

Inspired by living systems, biomolecules have been employed in vitro as building blocks for creating advanced nanostructured materials. In regard to nucleic acids, peptides, and lipids, their self-assembly pathways and resulting assembled structures are mostly encoded in their molecular structures. On the other hand, outside of its chain length, cellulose, a polysaccharide, lacks structural diversity; therefore, it is challenging to direct this homopolymer to controllably assemble into ordered nanostructures. Nevertheless, the properties of cellulose assemblies are outstanding in terms of their robustness and inertness, and these assemblies are attractive for constructing versatile materials. In this review article, we summarize recent research progress on the self-assembly of cellulose and the applications of assembled cellulose materials, especially for biomedical use. Given that cellulose is the most abundant biopolymer on Earth, gaining control over cellulose assembly represents a promising route for producing green materials with tailor-made nanostructures.

Ultrasound-assisted biomass valorization to industrial interesting products: state-of-the-art, perspectives and challenges

Nowadays, the application of ultrasound (US) energy for assisting the lignocellulosic biomass and waste materials conversion into value-added products has dramatically increased. In this sense, this review covers theoretical aspects, promising applications, challenges and perspectives about US and its use for biomass treatment. The combination of US energy with a suitable reaction time, temperature and solvent contributes to the destruction of recalcitrant lignin structure, allowing the products to be used in thermochemical and biological process. The main mechanisms related to US propagation and impact on the fragmentation of lignocellulosic materials, selectivity, and yield of conversion treatments are discussed. Moreover, the synergistic effects between US and alternative green solvents with the perspective of industrial applications are investigated. The present survey analysed the last ten years of literature, studying challenges and perspectives of US application in biorefinery. We were aiming to highlight value-added products and some new areas of research.

Amino Acid Ionic Liquids Catalyzed d-Glucosamine into Pyrazine Derivatives: Insight from NMR Spectroscopy

Using environment-friendly catalysts to convert biomass into compounds with high values is one of the central topics of green chemistry. In this work, [Ch][Pro] (cholinium as the cation and l-proline as the anion) ionic liquid was synthesized and applied as a model catalyst in the production of deoxyfructosazine (DOF) and fructosazine (FZ) from d-glucosamine (GlcNH₂). The ¹³C NMR chemical shift titration experiments and the diffusion-ordered NMR spectroscopy (DOSY) measurements showed that, when the [Ch][Pro] interacted with GlcNH₂, the l-proline anion ([Pro]^-) played a major catalytic role instead of cholinium cation ([Ch]⁺). The effects of the reaction temperature and the amount of [Ch][Pro] on the product yields were surveyed. The experimental results showed that the highest DOF yield (33.78%) was obtained after 30 min at 100 °C when the molar ratio of [Ch][Pro]/GlcNH₂ was 1. Moreover, in situ ¹H NMR and in situ ¹³C NMR experiments were applied to monitor the reaction process with [Ch][Pro] as the catalyst. The reactive intermediate, dihydrofructosazine, was clearly detected by these in situ techniques. Accordingly, a possible reaction pathway was proposed. By applying other amino acids as the anions, we also prepared five other [Ch][AA] ionic liquids, and they showed different catalytic activities and selectivity in the GlcNH₂ self-condensation reaction.

The Role of Ionic Liquids in the Lignin Separation from Lignocellulosic Biomass

Lignin is a natural polymer, one that has an abundant and renewable resource in biomass. Due to a tendency towards the use of biochemicals, the efficient utilization of lignin has gained wide attention. The delignification of lignocellulosic biomass makes its fractions (cellulose, hemicellulose, and lignin) susceptible to easier transformation to many different commodities like energy, chemicals, and materials that could be produced using the biorefinery concept. This review gives an overview of the field of lignin separation from lignocellulosic biomass and changes that occur in the biomass during this process, as well as taking a detailed look at the influence of parameters that lead the process of dissolution. According to recent studies, a number of ionic liquids (ILs) have shown a level of potential for industrial scale production in terms of the pretreatment of biomass. ILs are perspective green solvents for pretreatment of lignocellulosic biomass. These properties in ILs enable one to disrupt the complex structure of lignocellulose. In addition, the physicochemical properties of aprotic and protic ionic liquids (PILs) are summarized, with those properties making them suitable solvents for lignocellulose pretreatment which, especially, target lignin. The aim of the paper is to focus on the separation of lignin from lignocellulosic biomass, by keeping all components susceptible for biorefinery processes. The discussion includes interaction mechanisms between lignocellulosic biomass subcomponents and ILs to increase the lignin yield. According to our research, certain PILs have potential for the cost reduction of LC biomass pretreatment on the feasible separation of lignin.

Insights into the Potential of Hardwood Kraft Lignin to Be a Green Platform Material for Emergence of the Biorefinery

Lignin is an abundant, renewable, and relatively cheap biobased feedstock that has potential in energy, chemicals, and materials. Kraft lignin, more specifically, has been used for more than 100 years as a self-sustaining energy feedstock for industry after which it has finally reached more widespread commercial appeal. Unfortunately, hardwood kraft lignin (HWKL) has been neglected over these years when compared to softwood kraft lignin (SWKL). Therefore, the present work summarizes and critically reviews the research and development (R&D) dealing specifically with HWKL. It will also cover methods for HWKL extraction from black liquor, as well as its structure, properties, fractionation, and modification. Finally, it will reveal several interesting opportunities for HWKL that include dispersants, adsorbents, antioxidants, aromatic compounds (chemicals), and additives in briquettes, pellets, hydrogels, carbon fibers and polymer blends and composites. HWKL shows great potential for all these applications, however more R&D is needed to make its utilization economically feasible and reach the levels in the commercial lignin market commensurate with SWKL. The motivation for this critical review is to galvanize further studies, especially increased understandings in the field of HWKL, and hence amplify much greater utilization.

Near complete valorisation of Hybrid pennisetum to biomethane and lignin nanoparticles based on gamma-valerolactone/water pretreatment

This study is the first to integrate gamma-valerolactone/water (GVL/water) pretreatment with anaerobic digestion (AD) for biogas production and lignin nanoparticles (LNPs) synthesis. The hydrothermal treatment was conducted at 135 to 180 °C with GVL at 0 to 90%. After pretreatment, the compositions of hybrid pennisetum were changed with the removal of lignin, hemicellulose, and cellulose to different extent. Subsequent anaerobic digestion achieved a maximal specific methane yield of 228.00 ± 4.37 mL/g VS, compared with that at 165.11 ± 1.99 mL/g VS for the control. The highest actual methane yield (150 mL/g RM) was achieved by pretreatment with GVL/water (50/50) at 150 °C for 90 min. LNPs at 200 to 2000 nm were synthesized from the liquid waste with a yield at ~4 mg/mL. The mass balance of this integrated method was discussed. In general, the maximal valorisation of hybrid pennisetum was achieved based on a catalyst-free of GVL/water pretreatment.

The boosting effect of recombinant hemicellulases on the enzymatic hydrolysis of steam-treated sugarcane bagasse

To increase the efficiency of enzyme cocktails in deconstructing cellulose and hemicelluloses present in the plant cell wall, a combination of enzymes with complementary activities is required. Xylan is the main hemicellulose component of energy crops and for its complete hydrolysis a system consisting of several enzymes acting cooperatively, including endoxylanases (XYN), β-xylosidases (XYL) and α-l-arabinofuranosidases (ABF) is necessary. The current work aimed at evaluating the effect of recombinant hemicellulolytic enzymes on the enzymatic hydrolysis of steam-exploded sugarcane bagasse (SEB). One recombinant endoxylanase (HXYN2) and one recombinant β-xylosidase (HXYLA) from Humicola grisea var thermoidea, together with an α-l-arabinofuranosidase (AFB3) from Penicillium pupurogenum, all produced in Pichia pastoris, were used to formulate an efficient enzyme mixture for SEB hydrolysis using a 2³ Central Composite Rotatable Design (CCRD). The most potent enzyme for SEB hydrolysis was ABF3. Subsequently, the optimal enzyme mixture was used in combination with commercial cellulases (Accellerase 1500), either simultaneously or in sequential experiments. The supplementation of Accellerase 1500 with hemicellulases enhanced the glucose yield from SEB hydrolysis by 14.6%, but this effect could be raised to 50% when hemicellulases were added prior to hydrolysis with commercial cellulases. These results were supported by scanning electron microscopy, which revealed the effect of enzymatic hydrolysis on SEB fibers. Our results show the potential of complementary enzyme activities to improve enzymatic hydrolysis of SEB, thus improving the efficiency of the hydrolytic process.

A selective fractionation method of lignocellulosic materials using electro-assisted organosolv pretreatment

Lignocellulosic materials (LCMs) extracted from waste-wood products are promising sources of renewable chemicals and fuels. Organosolv pretreatment is commonly used for the fractionation of LCMs; however, these methods require high reaction temperatures, which remain problematic. In this study, room temperature ionic liquids (RTILs) and electrochemical conversion were used for LCMs fractionation. This paper presents a modified organosolv pretreatment, termed electro-assisted organosolv pretreatment (EAOP), which utilises gamma-valerolactone and 1-Butyl-3-methylimidazolium acetate as binary solution, in the presence of electrical energy. Importantly, EAOP can selectively fractionate lignin or cellulose at temperatures lower than 80 °C. Cellulose dissolution occurred at 2.4 V whereas lignin dissolution occurred at 4.2 V. A capacitance parameter was established and validated to describe the operating condition and selectively of EAOP. Operations conducted with capacitance less than 2317 F have the potential for cellulose solubilisation, whereas at capacitance exceeding 2317, lignin solubilisation was observed. This study showed that EAOP can overcome organosolv pretreatment shortfalls.

Characterization of Ionic Liquid Aqueous Two-Phase Systems: Phase Separation Behaviors and the Hydrophobicity Index between the Two Phases

1-Allyl-3-methylimidazolium chloride [Amim][Cl] and 1-butyl-3-methylimidazolium chloride [Bmim][Cl] are water-soluble ionic liquids (ILs) that can from an aqueous two-phase system (ATPS) when mixed with specific salts. Herein, we prepared [Amim][Cl]- and [Bmim][Cl]-ATPSs by adding the salts (K₂CO₃, K₂HPO₄). To investigate the phase separation behavior of the IL-ATPSs, binodal curves were drawn at different temperatures and the length and slope of the tie lines were analyzed. The [Bmim][Cl]/K₂HPO₄ system underwent two-phase separation at lower temperature conditions, suggesting that the phase separation might depend on the salting-out effect in the bottom phase. Using the IL-ATPS, the distribution coefficients, K_aa, of amino acids were determined and used to characterize the hydrophobicity index (HF) between the top and bottom phases, which is a good indicator to understand the molecular partitioning behaviors in conventional ATPSs. The HF values of the IL-ATPSs were in the range 0.13-0.41 mol/kJ; these values were almost the same as the HF values reported for an ATPS composed of poly(ethylene glycol) and salt.

Fractionation of Lignocellulosic Biomass by Selective Precipitation from Ionic Liquid Dissolution

We propose the treatment of barley straw with 1-ethyl-3-methylimidazolium acetate [EMIMAcO] ionic liquids (ILs) and subsequent precipitation with antisolvent mixtures, thus allowing the separation of the sugar-rich fractions (cellulose and hemicellulose) from the lignin fraction. For this purpose, different concentration ranges of acetone:water antisolvent mixtures were studied. In all cases, a high recovery percentage and a high and effective separation of fractions was achieved for 1:1 acetone:water. The fractionated lignocellulosic compounds were studied by using infrared spectroscopy, scanning electron microscopy and 1H nuclear magnetic resonance characterization techniques. This method allows the possibility of reusing IL, confirming the versatility of the established method. The fraction rich in cellulose and hemicellulose was subjected to acid hydrolysis (0.2 mol/L H2SO4) for 5 h at 140 °C, obtaining a yield of total reducing sugars of approximately 80%, much higher than those obtained in non-pretreated samples.

Lignocellulosic hydrogen production using dark fermentation by Clostridium lentocellum strain Cel10 newly isolated from Ailuropoda melanoleuca excrement

Due to the characteristics of renewable and carbon-neutral, lignocellulose is considered to be one of the most potential, feasible, and ample resources for biofuel production on the Earth. However, the low energy conversion capacity of microorganisms is the primary bottleneck for utilizing lignocellulosic biomass to produce biofuel. In the present study, a mesophilic bacterial strain Cel10 identified as Clostridium lentocellum, according to 16S rRNA sequence homology, which can produce hydrogen from lignocellulose was isolated and characterized. The optimal conditions of hydrogen production from carboxymethylcellulose (CMC) are 37 °C, pH 7.0, and 5.0 g L-1. The H2 production peaked at 5.419 mmol H2 g-1 CMC under these conditions, which is relatively high compared to the other reported mesophilic bacteria that use cellulose as a substrate. Moreover, the H2-producing performance of strain Cel10 using cassava residues, a type of natural lignocellulosic feedstock, was also investigated. The results show that the hydrogen production peaked at 4.08 mmol H2 g-1 after 72 h of incubation, which is almost 1.2-3.8 times higher than the production of other mesophilic and thermophilic strains, while the highest cassava residues degradation rate reached 45.43%. The results validate that Clostridium lentocellum strain Cel10, newly isolated from Ailuropoda melanoleuca excrement, can offer a new method for directly converting lignocellulosic biomass to bio-hydrogen.

Resistance mechanisms and reprogramming of microorganisms for efficient biorefinery under multiple environmental stresses

In the fermentation process of biorefinery, industrial strains are normally subjected to adverse environmental stresses, which leads to their slow growth, yield decline, a substantial increase in energy consumption, and other negative consequences, which ultimately seriously hamper the development of biorefinery. How to minimize the impact of stress on microorganisms is of great significance. This review not only reveals the damaging effects of different environmental stresses on microbial strains but also introduces commonly used strategies to improve microbial tolerance, including adaptive evolution, reprogramming of the industrial host based on genetic circuits, global transcription machinery engineering (gTME) and bioprocess integration. Furthermore, by integrating the advantages of these strategies and reducing the cost of system operation, the tolerance of industrial strains, combined with production efficiency and process stability, will be greatly improved, and the development prospects of biorefinery will be more widespread.

Theoretical Elucidation of β-O-4 Bond Cleavage of Lignin Model Compound Promoted by Sulfonic Acid-Functionalized Ionic Liquid

While the depolymerization of lignin to chemicals catalyzed by ionic liquids has attracted significant attention, the relevant molecular mechanism, especially the cleavage of specific bonds related to efficient depolymerization, still needs to be deeply understood for the complexity of this natural aromatic polymer. This work presents a detailed understanding of the cleavage of the most abundant β-O-4 bond in the model system, guaiacylglycerol β-guaiacyl ether, by a Brønsted acidic IL (1-methyl-3-(propyl-3-sulfonate) imidazolium bisulfate ([C₃SO₃Hmim][HSO₄]) using density functional theory calculation and molecular dynamics simulation. It has been found that [C₃SO₃Hmim][HSO₄] generates zwitterion/H₂SO₄via proton transfer with an energy barrier of 0.38 kcal/mol, which plays a dominant role in the lignin depolymerization process. Subsequently, the reaction can be carried out via three potential pathways, including (1) the dehydration of α-C-OH, (2) dehydration of γ-C-OH, and (3) the protonation of β-O. The electrophilic attack of H₂SO₄ and the hydrogen-bonding interaction between GG and zwitterion are the two most important factors to promote the depolymerization reaction. In all steps, the dehydration of α-C-OH route is computed to be favored for the experiment. The relatively higher energy barrier for β-O-4 bond dissociation among these reaction steps is attributed to the hindrance of the self-assembled clusters of GG in the mixed system. Further, the dense distribution of H13([C₃SO₃Hmim]) surrounding O21(GG), indicated by sharp peaks in RDFs, reveals that -SO₃H in cations plays a substantial role in solvating lignin. Hopefully, this work will demonstrate new insights into lignin depolymerization by functionalized ILs in biomass conversion chemistry.

Transformation of cellulosic saccharides into alkyl glucosides catalyzed by bifunctional ionic liquids

Three kinds of hydrophobic/acidic bifunctional ionic liquids, which contain two different anions, were synthesized and utilized as catalysts for the conversion of cellulosic saccharides into alkyl glucosides, which exhibit a high catalytic conversion for cellobiose and cellulose with a low degree of crystallinity; the catalyst can be easily recovered and reused.

Restoration of biofuel production levels and increased tolerance under ionic liquid stress is enabled by a mutation in the essential Escherichia coli gene cydC

BACKGROUND

Microbial production of chemicals from renewable carbon sources enables a sustainable route to many bioproducts. Sugar streams, such as those derived from biomass pretreated with ionic liquids (IL), provide efficiently derived and cost-competitive starting materials. A limitation to this approach is that residual ILs in the pretreated sugar source can be inhibitory to microbial growth and impair expression of the desired biosynthetic pathway.

RESULTS

We utilized laboratory evolution to select Escherichia coli strains capable of robust growth in the presence of the IL, 1-ethyl-3-methyl-imidizolium acetate ([EMIM]OAc). Whole genome sequencing of the evolved strain identified a point mutation in an essential gene, cydC, which confers tolerance to two different classes of ILs at concentrations that are otherwise growth inhibitory. This mutation, cydC-D86G, fully restores the specific production of the bio-jet fuel candidate D-limonene, as well as the biogasoline and platform chemical isopentenol, in growth medium containing ILs. Similar amino acids at this position in cydC, such as cydC-D86V, also confer tolerance to [EMIM]OAc. We show that this [EMIM]OAc tolerance phenotype of cydC-D86G strains is independent of its wild-type function in activating the cytochrome bd-I respiratory complex. Using shotgun proteomics, we characterized the underlying differential cellular responses altered in this mutant. While wild-type E. coli cannot produce detectable amounts of either product in the presence of ILs at levels expected to be residual in sugars from pretreated biomass, the engineered cydC-D86G strains produce over 200 mg/L D-limonene and 350 mg/L isopentenol, which are among the highest reported titers in the presence of [EMIM]OAc.

CONCLUSIONS

The optimized strains in this study produce high titers of two candidate biofuels and bioproducts under IL stress. Both sets of production strains surpass production titers from other IL tolerant mutants in the literature. Our application of laboratory evolution identified a gain of function mutation in an essential gene, which is unusual in comparison to other published IL tolerant mutants.

Elucidating the Energetics and Effects of Solvents on Cellulose Hydrolysis Using a Polymeric Acid Catalyst

A novel polymeric acid catalyst immobilized on a membrane substrate was found to possess superior catalytic activity and selectivity for biomass hydrolysis. The catalyst consists of two polymer chains, a poly(styrene sulfonic acid) (PSSA) polymer chain for catalyzing carbohydrate substrate, and a neighboring poly(vinyl imidazolium chloride) ionic liquid (PIL) polymer chain for promoting the solvation of the PSSA chain to enhance the catalytic activity. In order to elucidate the mechanism and determine the energetics of biomass catalytic processing using this unique catalyst, classical molecular dynamics (MD) coupled with metadynamics (MTD) simulations were conducted to determine the free energy surfaces (FES) of cellulose hydrolysis. The critical role that PIL plays in the catalytic conversion is elucidated. The solvation free energy and the interactions between PSSA, PIL, and cellulose chains are found to be significantly affected by the solvent.

Effects of Ultrasound Pretreatment on Eucalyptus Thermal Decomposition Characteristics As Determined by Thermogravimetric, Differential Scanning Calorimetry, and Fourier Transform Infrared Analysis

Samples were pretreated by ultrasound at 300 W and 28 kHz in three different solutions. The thermal degradation characteristics of the samples were then characterized via thermogravimetric, differential scanning calorimetry, and Fourier transform infrared analysis in a nitrogen environment. The characteristic of gas product release, the formation mechanisms of the main products, and the mechanistic basis for the effects of ultrasound on wood components were studied. The results showed that the gaseous products are the same with ultrasound pretreatment but the amounts are changed. The gaseous products mainly constitute of CO, H₂O, CO₂, CH₄, and CH₃COOH, and more gaseous products were produced at 361 °C than at 308 °C. The reaction rates for specimens pretreated in aqueous soda solution proceeded faster than specimens pretreated in aqueous acetic acid solution and distilled water. Moreover, the maximum FTIR spectra absorbance appeared around 341 °C for specimens pretreated in aqueous soda solution but appeared around 369 °C for the control sample and samples pretreated in distilled water or acetic acid solution. The heat flows for specimens pretreated in aqueous soda solution, compared to control group, was much lower. Additionally, hydroxyl and hydroperoxy radicals provided by ultrasound cavitation in alkaline conditions act to intensify the overall rates of reactions.