Shear-stress-mediated refolding of proteins from aggregates and inclusion bodies

Free-Standing Nanocomposite Au@Graphene Oxide Continuous Flow Synthesis in Water for Degradation of Organic Dyes

We have developed a rapid and facile method for preparing free-standing nanocomposite of gold nanoparticles with graphene oxide (Au@GO) in water under continuous flow in the absence of harsh reducing agents and any other auxiliary substances, as a method with favourable green chemistry metrics. This uses a vortex fluidic device (VFD) where induced mechanical energy and photo-contact electrification associated with the dynamic thin film in the rapidly rotating tube tilted at 45° while simultaneously UV irradiated (λ=254 nm, 20 W) results in decomposition of water to hydrogen and hydrogen peroxide with growth of the gold nanoparticles on the surface of the GO. We have established that the resulting Au@GO composite sheets rapidly catalyse the degradation of commercial dyes like methyl orange (MO) and methylene blue (MB) using the hydrogen peroxide generated in situ in the VFD. This process relies on active radicals generated through liquid-solid photo-contact electrification of water in the VFD which dramatically minimises the generation of waste in industrial applications, with the reaction having implications for wastewater treatment.

High-Shear Enhancement of Biginelli Reactions in Macromolecular Viscous Media

Chemical reactions and transformations in non-traditional vessels have gained significant interest in recent years. Flow chemistry, with its advantages in mixing, mass transfer, scalability, and automation, is a driving force behind this paradigm shift. In particular, the Vortex Fluidic Device (VFD) has emerged as a versatile tool across various applications, from organic synthesis to materials science. In this study, the role of the VFD in performing the Biginelli reaction, a multicomponent reaction widely used in pharmaceutical and polymer science, for a post-polymerization modification is explored. By conducting the Biginelli reaction in the VFD, rapid product formation with low catalyst loading and without the need for high temperatures is achieved. However, the critical need to understand and know solution viscosity, especially within the context of modifying macromolecules is highlighted.

Vortex fluidic regulated phospholipid equilibria involving liposomes down to sub-micelle size assemblies

Conventional channel-based microfluidic platforms have gained prominence in controlling the bottom-up formation of phospholipid based nanostructures including liposomes. However, there are challenges in the production of liposomes from rapidly scalable processes. These have been overcome using a vortex fluidic device (VFD), which is a thin film microfluidic platform rather than channel-based, affording ∼110 nm diameter liposomes. The high yielding and high throughput continuous flow process has a 45° tilted rapidly rotating glass tube with an inner hydrophobic surface. Processing is also possible in the confined mode of operation which is effective for labelling pre-VFD-prepared liposomes with fluorophore tags for subsequent mechanistic studies on the fate of liposomes under shear stress in the VFD. In situ small-angle neutron scattering (SANS) established the co-existence of liposomes ∼110 nm with small rafts, micelles, distorted micelles, or sub-micelle size assemblies of phospholipid, for increasing rotation speeds. The equilibria between these smaller entities and ∼110 nm liposomes for a specific rotational speed of the tube is consistent with the spatial arrangement and dimensionality of topological fluid flow regimes in the VFD. The prevalence for the formation of ∼110 nm diameter liposomes establishes that this is typically the most stable structure from the bottom-up self-assembly of the phospholipid and is in accord with dimensions of exosomes.

Current state of molecular and metabolic strategies for the improvement of L-asparaginase expression in heterologous systems

Heterologous expression of L-asparaginase (L-ASNase) has become an important area of research due to its clinical and food industry applications. This review provides a comprehensive overview of the molecular and metabolic strategies that can be used to optimize the expression of L-ASNase in heterologous systems. This article describes various approaches that have been employed to increase enzyme production, including the use of molecular tools, strain engineering, and in silico optimization. The review article highlights the critical role that rational design plays in achieving successful heterologous expression and underscores the challenges of large-scale production of L-ASNase, such as inadequate protein folding and the metabolic burden on host cells. Improved gene expression is shown to be achievable through the optimization of codon usage, synthetic promoters, transcription and translation regulation, and host strain improvement, among others. Additionally, this review provides a deep understanding of the enzymatic properties of L-ASNase and how this knowledge has been employed to enhance its properties and production. Finally, future trends in L-ASNase production, including the integration of CRISPR and machine learning tools are discussed. This work serves as a valuable resource for researchers looking to design effective heterologous expression systems for L-ASNase production as well as for enzymes production in general.

Burn Wound Bed Management

Critical to the success of modern burn care is the management of the burn wound. Timely and complete removal of nonviable tissue is complicated by the irreplaceable nature of the tissue lost either through the burn injury or as "collateral damage" as part of the treatment. Challenges in distinguishing between viable and nonviable tissue and "replacing the irreplaceable" are discussed alongside potential disruptive technologies which could fundamentally change how burn care is delivered. Advances in burn wound bed management forms the foundation on which the goal of zero preventable death and disability after burn injury can be achieved.

Recombinant expression and biophysical characterization of Mrt4 protein that involved in mRNA turnover and ribosome assembly from Saccharomyces cerevisiae

The mRNA turnover and ribosome assembly are facilitated by Mrt4 protein from Saccharomyces cerevisiae. In present study, we are reporting the cloning, expression and homogeneous purification of recombinant Mrt4. Mrt4 is a 236-amino-acid-long nuclear protein that plays a very crucial role in mRNA turnover and ribosome assembly during the translation process. mrt4 gene was amplified by polymerase chain reaction and cloned in expression vector pET23a (+) under the bacteriophage T7-inducible promoter and lac operator. Furthermore, protein was purified to homogeneity using immobilized metal affinity chromatography (IMAC) and its homogeneous purification was further validated by immunoblotting with anti-His antibody. The far-UV CD spectra represent that Mrt4 has a typical α helix with characteristic negative minima at 222 and 208 nm. At physiological pH, the fluorescence spectra and CD spectra showed properly folded tertiary and secondary structures of Mrt4, respectively. Saccharomyces Mrt4 protein possesses putative bipartite NLS (nuclear localization signal) at the N-terminal part followed by two well-conserved domains, rRNA-binding domains and translation factor (TF) binding domain. PIPSA analysis evaluates electrostatic interaction properties of proteins and concluded that Mrt4 protein can be used as a fingerprint for classifying Mrt4-like mRNA turnover protein from various species. The availability of an ample amount of protein may help in its biochemical and biophysical characterization, crystallization and identification of new interacting partners of Mrt4.

Vortex Fluidic Mediated Oxidative Sulfitolysis of Oxytocin

In peptide production, oxidative sulfitolysis can be used to protect the cysteine residues during purification, and the introduction of a negative charge aids solubility. Subsequent controlled reduction aids in ensuring correct disulfide bridging. In vivo, these problems are overcome through interaction with chaperones. Here, a versatile peptide production process has been developed using an angled vortex fluidic device (VFD), which expands the viable pH range of oxidative sulfitolysis from pH 10.5 under batch conditions, to full conversion within 20 min at pH 9-10.5 utilising the VFD. VFD processing gave 10-fold greater conversion than using traditional batch processing, which has potential in many applications of the sulfitolysis reaction.

Four component Passerini polymerization of bulky monomers under high shear flow

We introduce a four component Passerini polymerization utilizing sterically bulky isocyanide monomers. Under typical Passerini conditions, bulky isocyanides do not react within standard Passerini reaction timescales (hours). We overcome this challenge via the unique physiochemical conditions present in a vortex fluidic device, reducing the reaction time to 2 h on average. Under these high-shear thin-film conditions, bulky isocyanides are readily incorporated into the multicomponent polymerization without the need of high-pressure or temperature. Finally, we demonstrate that the four component approach using functional cyclic anhydrides allows for post-polymerization modification.

In Situ Monitored Vortex Fluidic-Mediated Protein Refolding/Unfolding Using an Aggregation-Induced Emission Bioprobe

Protein folding is important for protein homeostasis/proteostasis in the human body. We have established the ability to manipulate protein unfolding/refolding for β-lactoglobulin using the induced mechanical energy in the thin film microfluidic vortex fluidic device (VFD) with monitoring as such using an aggregation-induced emission luminogen (AIEgen), TPE-MI. When denaturant (guanidine hydrochloride) is present with β-lactoglobulin, the VFD accelerates the denaturation reaction in a controlled way. Conversely, rapid renaturation of the unfolded protein occurs in the VFD in the absence of the denaturant. The novel TPE-MI reacts with exposed cysteine thiol when the protein unfolds, as established with an increase in fluorescence intensity. TPE-MI provides an easy and accurate way to monitor the protein folding, with comparable results established using conventional circular dichroism. The controlled VFD-mediated protein folding coupled with in situ bioprobe AIEgen monitoring is a viable methodology for studying the denaturing of proteins.

Sub-micron moulding topological mass transport regimes in angled vortex fluidic flow

Shear stress in dynamic thin films, as in vortex fluidics, can be harnessed for generating non-equilibrium conditions, but the nature of the fluid flow is not understood. A rapidly rotating inclined tube in the vortex fluidic device (VFD) imparts shear stress (mechanical energy) into a thin film of liquid, depending on the physical characteristics of the liquid and rotational speed, ω, tilt angle, θ, and diameter of the tube. Through understanding that the fluid exhibits resonance behaviours from the confining boundaries of the glass surface and the meniscus that determines the liquid film thickness, we have established specific topological mass transport regimes. These topologies have been established through materials processing, as spinning top flow normal to the surface of the tube, double-helical flow across the thin film, and spicular flow, a transitional region where both effects contribute. The manifestation of mass transport patterns within the film have been observed by monitoring the mixing time, temperature profile, and film thickness against increasing rotational speed, ω. In addition, these flow patterns have unique signatures that enable the morphology of nanomaterials processed in the VFD to be predicted, for example in reversible scrolling and crumbling graphene oxide sheets. Shear-stress induced recrystallisation, crystallisation and polymerisation, at different rotational speeds, provide moulds of high-shear topologies, as 'positive' and 'negative' spicular flow behaviour. 'Molecular drilling' of holes in a thin film of polysulfone demonstrate spatial arrangement of double-helices. The grand sum of the different behavioural regimes is a general fluid flow model that accounts for all processing in the VFD at an optimal tilt angle of 45°, and provides a new concept in the fabrication of novel nanomaterials and controlling the organisation of matter.

Vortex Fluidic-Mediated Fabrication of Fast Gelated Silica Hydrogels with Embedded Laccase Nanoflowers for Real-Time Biosensing under Flow

The fabrication of hybrid protein-Cu3(PO4)2 nanoflowers (NFs) via an intermediate toroidal structure is dramatically accelerated under shear using a vortex fluidic device (VFD), which possesses a rapidly rotating angled tube. As-prepared laccase NFs (LNFs) exhibit ≈1.8-fold increase in catalytic activity compared to free laccase under diffusion control, which is further enhanced by ≈ 2.9-fold for the catalysis under shear in the VFD. A new LNF immobilization platform, LNF@silica incorporated in a VFD tube, was subsequently developed by mixing the LNFs for 15 min with silica hydrogel resulting in gelation along the VFD tube surface. The resulting LNFs@silica coating is highly stable and reusable, which allows a dramatic 16-fold enhancement in catalytic rates relative to LNF@silica inside glass vials. Ultraviolet-visible spectroscopy-based real-time monitoring within the LNFs@silica-coated tube reveals good stability of the coating in continuous flow processing. The results demonstrate the utility of the VFD microfluidic platform, further highlighting its ability to control chemical and enzymatic processes.

A droplet reactor on a super-hydrophobic surface allows control and characterization of amyloid fibril growth

Methods to produce protein amyloid fibrils, in vitro, and in situ structure characterization, are of primary importance in biology, medicine, and pharmacology. We first demonstrated the droplet on a super-hydrophobic substrate as the reactor to produce protein amyloid fibrils with real-time monitoring of the growth process by using combined light-sheet microscopy and thermal imaging. The molecular structures were characterized by Raman spectroscopy, X-ray diffraction and X-ray scattering. We demonstrated that the convective flow induced by the temperature gradient of the sample is the main driving force in the growth of well-ordered protein fibrils. Particular attention was devoted to PHF6 peptide and full-length Tau441 protein to form amyloid fibrils. By a combined experimental with the molecular dynamics simulations, the conformational polymorphism of these amyloid fibrils were characterized. The study provided a feasible procedure to optimize the amyloid fibrils formation and characterizations of other types of proteins in future studies.

Zhang et al present an integrated real-time imaging and flow field control platform based on water droplet evaporation on super-hydrophobic substrate (SHS) to enable amyloid fibril aggregation. They apply this methodology to observe structural polymorphism in PHF6 peptide and full length Tau441.

Continuous flow vortex fluidic-mediated exfoliation and fragmentation of two-dimensional MXene

MXene (Ti₂CT _x ) is exfoliated in a vortex fluidic device (VFD), as a thin film microfluidic platform, under continuous flow conditions, down to ca 3 nm thin multi-layered two-dimensional (2D) material, as determined using AFM. The optimized process, under an inert atmosphere of nitrogen to avoid oxidation of the material, was established by systematically exploring the operating parameters of the VFD, along with the concentration of the dispersed starting material and the choice of solvent, which was a 1 : 1 mixture of isopropyl alcohol and water. There is also some fragmentation of the 2D material into nanoparticles ca 68 nm in diameter.

A hyper-branched polymer tunes the size and enhances the fluorescent properties of aggregation-induced emission nanoparticles

The host-guest interaction approach, specifically via the formation of hydrogen bonds, is an effective strategy for preparing luminescent hyper-branched polymers. The challenge here is how to optimize the binding strength and particle size to tune fluorescence properties. The aim of the current study was to optimize the guest (aggregation-induced emission molecule, AIE)-host (hyper-branched polymer, HBP) interaction in the development of an HBP/AIE complex (AIE-HBP) with tunable luminescence properties via the formation of strong hydrogen bonds. Overall, a simple one-step method for the preparation of AIE-HBP was demonstrated. The method was based on the formation of hydrogen bonds among AIE molecules and HBP molecules, resulting in the development of a stable AIE-polymer complex. Compared to other techniques (direct polymerization or post-functionalization), the proposed technique was much simpler. The fluorescence properties of AIE-HBP were significantly enhanced compared to AIE alone and could be tuned during the formation of AIE-HBP by using a novel vortex fluidic device (VFD). The as-prepared AIE-HBP can be used to simultaneously enhance the mechanical properties of hydrogels while increasing the fluorescence properties.

Vortex fluidics-mediated DNA rescue from formalin-fixed museum specimens

DNA from formalin-preserved tissue could unlock a vast repository of genetic information stored in museums worldwide. However, formaldehyde crosslinks proteins and DNA, and prevents ready amplification and DNA sequencing. Formaldehyde acylation also fragments the DNA. Treatment with proteinase K proteolyzes crosslinked proteins to rescue the DNA, though the process is quite slow. To reduce processing time and improve rescue efficiency, we applied the mechanical energy of a vortex fluidic device (VFD) to drive the catalytic activity of proteinase K and recover DNA from American lobster tissue (Homarus americanus) fixed in 3.7% formalin for >1-year. A scan of VFD rotational speeds identified the optimal rotational speed for recovery of PCR-amplifiable DNA and while 500+ base pairs were sequenced, shorter read lengths were more consistently obtained. This VFD-based method also effectively recovered DNA from formalin-preserved samples. The results provide a roadmap for exploring DNA from millions of historical and even extinct species.

Dynamic thin film mediated slicing of boron nitride nanotubes

A method has been developed to slice boron nitride nanotubes BNNTs under continuous flow in a vortex fluidic device (VFD), along with a method to partially purify the as received BNNT containing material. The latter involves heating the BNNTs to 600 °C followed by dispersing in a 1 : 3 isopropyl alcohol (IPA) and water mixture at 100 °C. The VFD mediated slicing of the BNNTs comprises irradiating the rapidly rotating glass tube (20 mm OD) with a pulsed Nd:YAG laser. Systematically exploring the operating parameter space of the VFD established slicing of ca. 200 μm long purified BNNTs down to 340 nm to 400 nm, in ca. 53% yield, in a 1 : 1 mixture of IPA and water, in the absence of reagents/harsh chemicals, at a flow rate of 0.45 mL min^-1, a concentration of 0.1 mg mL^-1 BNNTs and an 8.5k rpm rotational speed, with the pulsed laser operating at 1064 nm and 250 mJ per pulse.

Vertically aligned laser sliced MWCNTs

Applications of multi-walled carbon nanotubes (MWCNTs) benefit from the availability of specific lengths of the material while keeping the outer walls pristine, for example, for applications requiring vertically aligned tubes. To this end, a simple and effective continuous flow 'top down' process to control the length of sliced MWCNTs has been developed using a vortex fluidic device (VFD) coupled with a 1064 nm pulse laser, with the process in the absence of chemicals and any auxiliary substances. Three different length distributions of the sliced MWCNTs, centered at 75 ± 2.1 nm, 300 ± 1.8 nm and 550 ± 1.4 nm, have been generated with the length depending on the VFD operating parameters and laser energy, with the processing resulting in a decrease in side wall defects of the material. We also show the ability to vertically self assemble short MWCNTs on a silicon substrate with control of the surface density coverage using a simple dipping and rinsing method.

Three-step-in-one synthesis of supercapacitor MWCNT superparamagnetic magnetite composite material under flow

Composites of multi-walled carbon nanotubes (MWCNTs) and superparamagnetic magnetite nanoparticles, Fe3O4@MWCNT, were synthesized in DMF in a vortex fluidic device (VFD). This involved in situ generation of the iron oxide nanoparticles by laser ablation of bulk iron metal at 1064 nm using a pulsed laser, over the dynamic thin film in the microfluidic platform. The overall processing is a three-step in one operation: (i) slicing MWCNTs, (ii) generating the superparamagnetic nanoparticles and (iii) decorating them on the surface of the MWCNTs. The Fe3O4@MWCNT composites were characterized by transmission electron microscopy, scanning transmission electron microscope, TG analysis, X-ray diffraction and X-ray photoelectron spectroscopy. They were used as an active electrode for supercapacitor measurements, establishing high gravimetric and areal capacitances of 834 F g-1 and 1317.7 mF cm-2 at a scan rate of 10 mV s-1, respectively, which are higher values than those reported using similar materials. In addition, the designer material has a significantly higher specific energy of 115.84 W h kg-1 at a specific power of 2085 W kg-1, thereby showing promise for the material in next-generation energy storage devices.

Introduction into nanotechnology and microbiology

The current chapter summaries the world of Microbiology and boom of Nanotechnology and how both the exciting fields come together to help men kind with various new applications in water, food, medical biology and immunology. Furthermore synthesis of nano materials utilising the potential of microorganisms also opens a newer avenue for 'green' synthesis.

Neutron imaging and modelling inclined vortex driven thin films

The vortex fluidic device (VFD) is a thin film microfluidic platform which has a wide range of applications in synthesis and other areas of science, and it is important to understand the nature of the thin film of liquid in its inclined rapidly rotating tube. Neutron imaging has been used to determine the thickness of the film in a quartz tube with its shape modelled mathematically, showing good agreement between the model and experiments. The resultant equations are useful for studying VFD mediated processing in general, for which the optimal tilt angle of the tube is typically 45°. This includes its utility for the intelligent scale-up of organic syntheses, as demonstrated in the present study by the scaling up of an imine and amide synthesis to >1 g/min.

p-Phosphonic acid calix[8]arene mediated synthesis of ultra-large, ultra-thin, single-crystal gold nanoplatelets

Large, ultrathin, single-crystal gold platelets are produced in the presence of p-phosphonic acid calix[8]arene as both a catalyst and stabiliser.

Laser-Ablated Vortex Fluidic-Mediated Synthesis of Superparamagnetic Magnetite Nanoparticles in Water Under Flow

Selective formation of only one iron oxide phase is a major challenge in conventional laser ablation process, as is scaling up the process. Herein, superparamagnetic single-phase magnetite nanoparticles of hexagonal and spheroidal-shape, with an average size of ca. 15 nm, are generated by laser ablation of bulk iron metal at 1064 nm in a vortex fluidic device (VFD). This is a one-step continuous flow process, in air at ambient pressure, with in situ uptake of the nanoparticles in the dynamic thin film of water in the VFD. The process minimizes the generation of waste by avoiding the need for any chemicals or surfactants and avoids time-consuming purification steps in reducing any negative impact of the processing on the environment.

Vortex Fluidic Mediated Synthesis of Macroporous Bovine Serum Albumin-Based Microspheres

Macroporous bovine serum albumin (BSA) nanoparticles with controllable diameter were readily fabricated in a rapidly rotating angled glass tube in a vortex fluidic device (VFD). Systematically varying the rotational speed and the ratio of BSA, ethanol, and glutaraldehyde led to conditions for generating ca. 600 nm diameter macroporous particles that have intrinsic fluorescence emission at 520 nm when excited at 490 nm. The presence of the macropores increased the absorption efficiency of rhodamine B with potential applications for drug delivery purpose, compared with BSA nanoparticles having surfaces devoid of pores. Further control over the size of BSA nanoparticles occurred in the presence of C-phycocyanin protein during the VFD processing, along with control of their shape, from spheres to pockets, as established in exploring the parameter space of the microfluidic device.

Controlling the growth of fullerene C60 cones under continuous flow

Micromixing of an o-xylene solution of C60 with N-N-dimethylformamide (DMF) at room temperature under continuous flow in a vortex fluidic device (VFD) results in the formation of symmetrical right cones in high yield with diameters 0.5 to 2.5 μm, pitch angle 25° to 55° and wall thickness 120 to 310 nm. Their formation is in the absence of surfactants and any other reagents, and is scalable. The cones are formed at specific operating parameters of the VFD, including rotational speed, flow rate and concentration, and varying these results in other structures such as grooved fractals. Other aromatic solvents in place of o-xylene results in the formation of rods, spicules and prisms, respectively for m-xylene, p-xylene and mesitylene.

Continuous flow synthesis of phosphate binding h-BN@magnetite hybrid material

Hexagonal boron nitride (h-BN) is rendered magnetically responsive in aqueous media by binding superparamagnetic magnetite nanoparticles 8.5–18.5 nm in diameter on the surface. The composite material was generated under continuous flow in water in a dynamic thin film in a vortex fluidic device (VFD) with the source of iron generated by laser ablation of a pure iron metal target in the air above the liquid using a Nd:YAG pulsed laser operating at 1064 nm and 360 mJ. Optimum operating parameters of the VFD were a rotational speed of 7.5k rpm for the 20 mm OD (17.5 mm ID) borosilicate glass tube inclined at 45 degrees, with a h-BN concentration at 0.1 mg mL⁻¹, delivered at 1.0 mL min⁻¹ using a magnetically stirred syringe to keep the h-BN uniformly dispersed in water prior to injection into the base of the rapidly rotating tube. The resulting composite material, containing 5.75% weight of iron, exhibited high phosphate ion adsorption capacity, up to 171.2 mg PO₄³⁻ per gram Fe, which was preserved on recycling the material five times.

Vortex fluidic fabricated h-BN@magnetite under continuous flow in water exhibits recyclable high phosphate ion adsorption capacity.

Re-entrant supramolecular interactions in inverse-melting α-cyclodextrin·4-methylpyridine·water mixtures: an NMR study

Inverse freezing αCD·4MP·H₂O turns into a gel as αCD loses its solvation shell. First, it loses its interaction with 4MP, and then its solvation by water.

High-throughput recombinant protein expression in Escherichia coli: current status and future perspectives

The ease of genetic manipulation, low cost, rapid growth and number of previous studies have made Escherichia coli one of the most widely used microorganism species for producing recombinant proteins. In this post-genomic era, challenges remain to rapidly express and purify large numbers of proteins for academic and commercial purposes in a high-throughput manner. In this review, we describe several state-of-the-art approaches that are suitable for the cloning, expression and purification, conducted in parallel, of numerous molecules, and we discuss recent progress related to soluble protein expression, mRNA folding, fusion tags, post-translational modification and production of membrane proteins. Moreover, we address the ongoing efforts to overcome various challenges faced in protein expression in E. coli, which could lead to an improvement of the current system from trial and error to a predictable and rational design.

Egg Albumen as a Fast and Strong Medical Adhesive Glue

Sutures penetrate tissues to close wounds. This process leads to inflammatory responses, prolongs healing time, and increases operation complexity. It becomes even worse when sutures are applied to stress-sensitive and fragile tissues. By bonding tissues via forming covalent bonds, some medical adhesives are not convenient to be used by surgeons and have side effects to the tissues. Here egg albumen adhesive (EAA) is reported with ultrahigh adhesive strength to bond various types of materials and can be easily used without any chemical and physical modifications. Compared with several commercial medical glues, EAA exhibits stronger adhesive property on porcine skin, glass, polydimethylsiloxane. The EAA also shows exceptional underwater adhesive strength. Finally, wound closure using EAA on poly(caprolactone) nanofibrous sheet and general sutures is investigated and compared in a rat wound model. EAA also does not show strong long-term inflammatory response, suggesting that EAA has potential as a medical glue, considering its abundant source, simple fabrication process, inherent nontoxicity, and low cost.

Analysis of the pressure requirements for silk spinning reveals a pultrusion dominated process

Silks are remarkable materials with desirable mechanical properties, yet the fine details of natural production remain elusive and subsequently inaccessible to biomimetic strategies. Improved knowledge of the natural processes could therefore unlock development of a host of bio inspired fibre spinning systems. Here, we use the Chinese silkworm Bombyx mori to review the pressure requirements for natural spinning and discuss the limits of a biological extrusion domain. This provides a target for finite element analysis of the flow of silk proteins, with the aim of bringing the simulated and natural domains into closer alignment. Supported by two parallel routes of experimental validation, our results indicate that natural spinning is achieved, not by extruding the feedstock, but by the pulling of nascent silk fibres. This helps unravel the oft-debated question of whether silk is pushed or pulled from the animal, and provides impetus to the development of pultrusion-based biomimetic spinning devices.The natural production of silks remains elusive and subsequently inaccessible to biomimetic strategies. Here the authors show that silks cannot be spun by pushing alone, and that natural spinning is dominated by pultrusion, which provides design guidelines for future biomimetic spinning systems.

Vortex Fluidic Chemical Transformations

Driving chemical transformations in dynamic thin films represents a rapidly thriving and diversifying research area. Dynamic thin films provide a number of benefits including large surface areas, high shearing rates, rapid heat and mass transfer, micromixing and fluidic pressure waves. Combinations of these effects provide an avant-garde style of conducting chemical reactions with surprising and unusual outcomes. The vortex fluidic device (VFD) has proved its capabilities in accelerating and increasing the efficiencies of numerous organic, materials and biochemical reactions. This Minireview surveys transformations that have benefited from VFD-mediated processing, and identifies concepts driving the effectiveness of vortex-based dynamic thin films.

Ten-Minute Protein Purification and Surface Tethering for Continuous-Flow Biocatalysis

Nature applies enzymatic assembly lines to synthesize bioactive compounds. Inspired by such capabilities, we have developed a facile method for spatially segregating attached enzymes in a continuous-flow, vortex fluidic device (VFD). Fused Hisn -tags at the protein termini allow rapid bioconjugation and consequent purification through complexation with immobilized metal affinity chromatography (IMAC) resin. Six proteins were purified from complex cell lysates to average homogeneities of 76 %. The most challenging to purify, tobacco epi-aristolochene synthase, was purified in only ten minutes from cell lysate to near homogeneity (>90 %). Furthermore, this "reaction-ready" system demonstrated excellent stability during five days of continuous-flow processing. Towards multi-step transformations in continuous flow, proteins were arrayed as ordered zones on the reactor surface allowing segregation of catalysts. Ordering enzymes into zones opens up new opportunities for continuous-flow biosynthesis.

Shear Stress Induced Fabrication of Dandelion-Shaped Lanthanide Phosphate Nanoparticles

Lanthanide phosphate nanoparticles were co-precipitated under continuous flow in a vortex fluidic device in the presence of polyvinylpyrrolidone (PVP) of different molecular weights and at varying rotational speeds and tilt angles. Dandelion-shaped lanthanide phosphate particles were produced at rotation speeds of 5000 rpm and 7000 rpm. In contrast, individual rods formed at 9000 rpm. Transition electron microscope images reveal changes in morphology of the dandelion-shaped nanoparticles with changes in the chain length of PVP or tilt angle of the tube of the vortex fluidic device. These morphological changes are likely to arise from different wrapping and aggregation of the nanoparticles induced by the PVP polymer under shear.

Vortex fluidics synthesis of polymer coated superparamagnetic magnetite nanoparticles

Polymer coated superparamagnetic magnetite nanoparticles with improved magnetic properties are accessible under continuous flow conditions within a vortex fluidic device.

Accelerating Enzymatic Catalysis Using Vortex Fluidics

Enzymes catalyze chemical transformations with outstanding stereo- and regio-specificities, but many enzymes are limited by their long reaction times. A general method to accelerate enzymes using pressure waves contained within thin films is described. Each enzyme responds best to specific frequencies of pressure waves, and an acceleration landscape for each protein is reported. A vortex fluidic device introduces pressure waves that drive increased rate constants (kcat ) and enzymatic efficiency (kcat /Km ). Four enzymes displayed an average seven-fold acceleration, with deoxyribose-5-phosphate aldolase (DERA) achieving an average 15-fold enhancement using this approach. In solving a common problem in enzyme catalysis, a powerful, generalizable tool for enzyme acceleration has been uncovered. This research provides new insights into previously uncontrolled factors affecting enzyme function.

Rapid protein immobilization for thin film continuous flow biocatalysis

A versatile enzyme immobilization strategy for thin film continuous flow processing is reported. Here, non-covalent and glutaraldehyde bioconjugation are used to immobilize enzymes on the surfaces of borosilicate reactors. This approach requires only ng of protein per reactor tube, with the stock protein solution readily recycled to sequentially coat >10 reactors. Confining reagents to thin films during immobilization reduced the amount of protein, piranha-cleaning solution, and other reagents by ∼96%. Through this technique, there was no loss of catalytic activity over 10 h processing. The results reported here combines the benefits of thin film flow processing with the mild conditions of biocatalysis.

Harnessing Thin-Film Continuous-Flow Assembly Lines

Inspired by nature's ability to construct complex molecules through sequential synthetic transformations, an assembly line synthesis of α-aminophosphonates has been developed. In this approach, simple starting materials are continuously fed through a thin-film reactor where the intermediates accrue molecular complexity as they progress through the flow system. Flow chemistry allows rapid multistep transformations to occur via reaction compartmentalization, an approach not amenable to using conventional flasks. Thin film processing can also access facile in situ solvent exchange to drive reaction efficiency, and through this method, α-aminophosphonate synthesis requires only 443 s residence time to produce 3.22 g h(-1) . Assembly-line synthesis allows unprecedented reaction flexibility and processing efficiency.

Fluid dynamic lateral slicing of high tensile strength carbon nanotubes

Lateral slicing of micron length carbon nanotubes (CNTs) is effective on laser irradiation of the materials suspended within dynamic liquid thin films in a microfluidic vortex fluidic device (VFD). The method produces sliced CNTs with minimal defects in the absence of any chemical stabilizers, having broad length distributions centred at ca 190, 160 nm and 171 nm for single, double and multi walled CNTs respectively, as established using atomic force microscopy and supported by small angle neutron scattering solution data. Molecular dynamics simulations on a bent single walled carbon nanotube (SWCNT) with a radius of curvature of order 10 nm results in tearing across the tube upon heating, highlighting the role of shear forces which bend the tube forming strained bonds which are ruptured by the laser irradiation. CNT slicing occurs with the VFD operating in both the confined mode for a finite volume of liquid and continuous flow for scalability purposes.

Manipulating three-dimensional gel network entanglement by thin film shearing

A novel method of combining thin-film shearing with SANS resulted in complete disruption of 3-D network of fluorous bis-urea gel. In contrast, non-fluorinated analogue undergoes partial disruption which emphasizes the resistance of non-fluorous bis-urea gelators towards shear.