Visible-Light Photocatalysts and Their Perspectives for Building Photocatalytic Membrane Reactors for Various Liquid Phase Chemical Conversions

Photocatalytic organic synthesis/conversions and water treatment under visible light are a challenging task to use renewable energy in chemical transformations. In this review a brief overview on the mainly employed visible light photocatalysts and a discussion on the problems and advantages of Vis-light versus UV-light irradiation is reported. Visible light photocatalysts in the photocatalytic conversion of CO2, conversion of acetophenone to phenylethanol, hydrogenation of nitro compounds, oxidation of cyclohexane, synthesis of vanillin and phenol, as well as hydrogen production and water treatment are discussed. Some applications of these photocatalysts in photocatalytic membrane reactors (PMRs) for carrying out organic synthesis, conversion and/or degradation of organic pollutants are reported. The described cases show that PMRs represent a promising green technology that could shift on applications of industrial interest using visible light (from Sun) active photocatalysts.

Visible-Light-Activated C-C Bond Cleavage and Aerobic Oxidation of Benzyl Alcohols Employing BiMXO5 (M=Mg, Cd, Ni, Co, Pb, Ca and X=V, P)

The synthesis, structure, optical and photocatalytic studies of a family of compounds with the general formula, BiMXO₅ ; M=Mg, Cd, Ni, Co, Pb, Ca and X=V, P is presented. The compounds were prepared by regular solid-state reaction of constituents in the temperature range of 720-810 °C for 24 h. The compounds were characterized by powder X-ray diffraction (PXRD) methods. The Rietveld refinement of the PXRD patterns have been carried out to establish the structure. The optical absorption spectra along with the colors in daylight have been explained employing the allowed d-d transition. In addition, the observed colors of some of the V⁵⁺ containing compounds were explained using metal-to-metal charge transfer (MMCT) from the partially filled transition-metal 3d orbitals to the empty 3d orbitals of V⁵⁺ ions. The near IR (NIR) reflectivity studies indicate that many compounds exhibit good NIR reflectivity, suggesting that these compounds can be employed as 'cool pigments'. The experimentally determined band gaps of the prepared compounds were found to be suitable to exploit them for visible light activated photocatalysis. Photocatalytic C-C bond cleavage of alkenes and aerobic oxidation of alcohols were investigated employing visible light, which gave good yields and selectivity. The present study clearly demonstrated the versatility of the Paganoite family of compounds (BiMXO₅ ) towards new colored inorganic materials, visible-light photocatalysts and 'cool pigments'.

Anaerobic Alcohol Conversion to Carbonyl Compounds over Nanoscaled Rh-Doped SrTiO3 under Visible Light

Photocatalytic oxidation of organic compounds on semiconductors provides a mild approach for organic synthesis and solar energy utilization. Herein, we identify the key points for the photocatalytic oxidation over Pt-loaded Rh-doped strontium titanate allowing the conversion of alcohols efficiently and selectively to aldehydes and ketones under anaerobic conditions and visible light with an apparent quantum efficiency of pure benzyl alcohol oxidation at 420 nm of ≤49.5%. Mechanistic investigations suggest that thermodynamically the controlled valence band edge position via Rh doping provides a suitable oxidation ability of photogenerated holes, avoiding the powerful hydroxyl radical intermediates prone to overoxidation resulting in high selectivity. Kinetically, oxygen vacancies induced by Rh³⁺ substitution in the SrTiO₃ lattice not only favor the dissociative adsorption of alcohols yielding alkoxy species but also induce the weakening of the α-C-H bond facilitating its cleavage by the photogenerated holes. Pt nanoparticles deposited as a cocatalyst contribute to the final hydrogen evolution.

TiO2 Photocatalyzed C–H Bond Transformation for C–C Coupling Reactions

Fulfilling the direct inert C–H bond functionalization of raw materials that are earth-abundant and commercially available for the synthesis of diverse targeted organic compounds is very desirable and its implementation would mean a great reduction of the synthetic steps required for substrate prefunctionalization such as halogenation, borylation, and metalation. Successful C–H bond functionalization mainly resorts to homogeneous transition-metal catalysis, albeit sometimes suffering from poor catalyst reusability, nontrivial separation, and severe biotoxicity. TiO2 photocatalysis displays multifaceted advantages, such as strong oxidizing ability, high chemical stability and photostability, excellent reusability, and low biotoxicity. The chemical reactions started and delivered by TiO2 photocatalysts are well known to be widely used in photocatalytic water-splitting, organic pollutant degradation, and dye-sensitized solar cells. Recently, TiO2 photocatalysis has been demonstrated to possess the unanticipated ability to trigger the transformation of inert C–H bonds for C–C, C–N, C–O, and C–X bond formation under ultraviolet light, sunlight, and even visible-light irradiation at room temperature. A few important organic products, traditionally synthesized in harsh reaction conditions and with specially functionalized group substrates, are continuously reported to be realized by TiO2 photocatalysis with simple starting materials under very mild conditions. This prominent advantage—the capability of utilizing cheap and readily available compounds for highly selective synthesis without prefunctionalized reactants such as organic halides, boronates, silanes, etc.—is attributed to the overwhelmingly powerful photo-induced hole reactivity of TiO2 photocatalysis, which does not require an elevated reaction temperature as in conventional transition-metal catalysis. Such a reaction mechanism, under typically mild conditions, is apparently different from traditional transition-metal catalysis and beyond our insights into the driving forces that transform the C–H bond for C–C bond coupling reactions. This review gives a summary of the recent progress of TiO2 photocatalytic C–H bond activation for C–C coupling reactions and discusses some model examples, especially under visible-light irradiation.

Modification of heterogeneous photocatalysts for selective organic synthesis

This review elaborates on recent strategies of modifying heterogeneous photocatalysts for high-efficiency selective organic synthesis.

Photocatalytic Dehydrogenation of Primary Alcohols: Selectivity Goes against Adsorptivity

Solid/liquid heterogeneous photocatalysis was often considered to occur on the active sites of a solid catalyst surface. Herein, we report that the selectivity of photocatalytic dehydrogenative oxidations of aliphatic primary alcohols in acetonitrile solution into corresponding aldehydes exhibits an anomalous relationship with adsorption behavior of the alcohols. By using Pt-loaded TiO₂ photocatalyst in an inert atmosphere under UV light illumination, primary short-chain alcohols (SCAs) with strong adsorption were dehydrogenated into aldehydes in very poor selectivity, whereas weak-adsorbable long-chain alcohols (LCAs) were transformed into corresponding aldehydes with much higher selectivity. More than 20 examples of primary LCAs (C₄-C₁₀) were successfully transformed into their corresponding aldehydes with satisfactory selectivity and yield. Both solid-state magic-angle-spinning ¹³C NMR and attenuated total reflectance-Fourier transform infrared spectroscopy studies provided concrete differences in adsorption behaviors on the Pt-TiO₂ photocatalyst surface between SCA ethanol and LCA n-octanol. To further uncover the mechanism for different selectivities of SCAs and LCAs in photodehydrogenation, in situ electron paramagnetic resonance (EPR) experiments (at 8 K temperature) were employed to observe the oxidation features of photogenerated hole in the valance band of Pt-TiO₂ (h_vb ⁺). The EPR experimental studies exhibited that unlike ethanol, either n-octanol or solvent acetonitrile alone all could not scavenge photogenerated h_vb ⁺ on Pt-P25 photocatalyst and only n-octanol dissolved in acetonitrile solvent could smoothly react with photoinduced hole. This indicated that selective oxidations of LCAs were achieved by solvent-delivered oxidation rather than directly destructive oxidation of photogenerated h_vb ⁺. Our results may open an alternative way in selective dehydrogenative oxidation of various substrates sensitive to both dioxygen and high-temperature treatments.

Selective photocatalytic oxidation of aromatic alcohols into aldehydes by tungsten blue oxide (TBO) anchored with Pt nanoparticles

Hypostoichiometric Pt/WO₃ shows efficient, selective and stable conversion of aromatic alcohols into corresponding aldehydes under simulated sunlight in aqueous solution.

Tertiary amine mediated aerobic oxidation of sulfides into sulfoxides by visible-light photoredox catalysis on TiO2

The selective oxidation of sulfides into sulfoxides receives much attention due to industrial and biological applications. However, the realization of this reaction with molecular oxygen at room temperature, which is of importance towards green and sustainable chemistry, remains challenging. Herein, we develop a strategy to achieve the aerobic oxidation of sulfides into sulfoxides by exploring the synergy between a tertiary amine and titanium dioxide via visible-light photoredox catalysis. Specifically, titanium dioxide can interact with triethylamine (TEA) to form a visible-light harvesting surface complex, preluding the ensuing selective redox reaction. Moreover, TEA, whose stability was demonstrated by a turnover number of 32, plays a critical role as a redox mediator by shuttling electrons during the oxidation of sulfide. This work suggests that the addition of a redox mediator is highly functional in establishing visible-light-induced reactions via heterogeneous photoredox catalysis.

Heterogeneous Photocatalysis and Photoelectrocatalysis: From Unselective Abatement of Noxious Species to Selective Production of High-Value Chemicals

Heterogeneous photocatalysis and photoelectrocatalysis have been considered as oxidation technologies to abate unselectively noxious species. This article focuses instead on the utilization of these methods for selective syntheses of organic molecules. Some promising reactions have been reported in the presence of various TiO2 samples and the important role played by the amorphous phase has been discussed. The low solubility of most of the organic compounds in water limits the utilization of photocatalysis. Dimethyl carbonate has been proposed as an alternative green organic solvent. The recovery of the products by coupling photocatalysis with pervaporation membrane technology seems to be a solution for future industrial applications. As far as photoelectrocatalysis is concerned, a decrease in recombination of the photogenerated pairs occurs, enhancing the rate of the oxidation reactions and the quantum yield. Another benefit is to avoid reaction(s) between the intermediates and the substrate, as anodic and cathodic reactions take place in different places.

Highly efficient and selective oxidation of aromatic alcohols photocatalyzed by nanoporous hierarchical Pt/Bi2WO6 in organic solvent-free environment

Selective conversion of aromatic alcohols into corresponding aldehydes is important from energy and environmental stance. Here, we describe highly selective (>99%) and efficient conversion (>99%) of aromatic alcohols (e.g., 4-methoxybenzyl alcohol and 4-nitrobenzyl alcohol) into their corresponding aldehydes in the presence of Pt-modified nanoporous hierarchical Bi2WO6 spheres in water under simulated sunlight at ambient conditions. Overoxidation of p-anisaldehyde, formed during photooxidation process, was not observed until comprehensive alcohol oxidation was attained. Furthermore, the catalyst showed substantial oxidation under dark and course of conversion was different than that of under light. Dependency of alcohol oxidation on substrate concentration, photocatalyst amount, and Pt loading was studied. The effect of various radical scavengers was investigated, and the rate-determining step was elucidated. It has been envisaged that the reduction site of semiconductor photocatalysts plays more decisive role in determining the selectivity as alcohol preferably get oxidized over that of water. Furthermore, the chemical stability and recyclability of the photocatalyst were investigated.

Visible-light driven oxidation of gaseous aliphatic alcohols to the corresponding carbonyls via TiO2 sensitized by a perylene derivative

Sensitized P25 TiO2 was prepared by wet impregnation with a home-prepared perylene dye, i.e., N,N'-bis(2-(1-piperazino)ethyl)-3,4,9,10-perylene-tetracarboxylic acid diimide dichloride (PZPER). Energy levels of PZPER were found to be compatible with those of TiO2 allowing fast electron transfer. The obtained catalyst has been characterized and used in the gas-phase partial oxidation of aliphatic primary and secondary alcohols, i.e., methanol, ethanol, and 2-propanol. The reaction was carried out under cut-off (λ > 400 nm) simulated solar radiation in O2 atmosphere. The perylene derivative allowed a good absorbance of visible radiation thanks to its low optical energy gap (2.6 eV) which was evaluated by cyclic voltammetry. The optimal organic sensitizing amount was found to be 5.6 % w/w in terms of yield in carbonyl derivatives. Moreover, no change in reactivity/selectivity was observed after 10-h irradiation thus confirming the catalyst stability. Yields into formaldehyde, acetaldehyde, and acetone were 67, 70, and 96 %, respectively. No significant amounts of organic byproducts were detected but for methanol oxidation, whereas a minor amount of the substrate degraded to CO2.

Bi2WO6: A highly chemoselective visible light photocatalyst toward aerobic oxidation of benzylic alcohols in water

The visible-light-driven flower-like Bi₂WO₆ photocatalyst toward “green” chemistry oriented selective organic transformations in water is an essential pathway to sustainable development.

Synthesis of one-dimensional CdS@TiO₂ core-shell nanocomposites photocatalyst for selective redox: the dual role of TiO₂ shell

One-dimensional (1D) CdS@TiO₂ core-shell nanocomposites (CSNs) have been successfully synthesized via a two-step solvothermal method. The structure and properties of 1D CdS@TiO₂ core-shell nanocomposites (CdS@TiO₂ CSNs) have been characterized by a series of techniques, including X-ray diffraction (XRD), ultraviolet-visible-light (UV-vis) diffuse reflectance spectra (DRS), field-emission scanning electron microscopy (FESEM), photoluminescence spectra (PL), and electron spin resonance (ESR) spectroscopy. The results demonstrate that 1D core-shell structure is formed by coating TiO₂ onto the substrate of CdS nanowires (NWs). The visible-light-driven photocatalytic activities of the as-prepared 1D CdS@TiO₂ CSNs are evaluated by selective oxidation of alcohols to aldehydes under mild conditions. Compared to bare CdS NWs, an obvious enhancement of both conversion and yield is achieved over 1D CdS@TiO₂ CSNs, which is ascribed to the prolonged lifetime of photogenerated charge carriers over 1D CdS@TiO₂ CSNs under visible-light irradiation. Furthermore, it is disclosed that the photogenerated holes from CdS core can be stuck by the TiO₂ shell, as evidenced by controlled radical scavenger experiments and efficiently selective reduction of heavy-metal ions, Cr(VI), over 1D CdS@TiO₂ CSNs, which consequently leads to the fact that the reaction mechanism of photocatalytic oxidation of alcohols over 1D CdS@TiO₂ CSNs is apparently different from that over 1D CdS NWs under visible-light irradiation. It is hoped that our work could not only offer useful information on the fabrication of various specific 1D core-shell nanostructures, but also open a new doorway of such 1D core-shell semiconductors as visible-light photocatalysts in the promising field of selective transformations.

Recent progress on metal core@semiconductor shell nanocomposites as a promising type of photocatalyst

The creation of core-shell nanocomposites (CSNs) has attracted considerable attention and developed into an increasingly important research area at the frontier of advanced materials chemistry. CSNs, which are nanoscaled assemblies with a chemical composition that is different on the surface compared to the core region, have found versatile applications in many fields, such as electrooptics, quantum dots, microscopy labels, drug delivery, chemical sensors, nanoreactors and catalysis. This review is primarily focused on the applications of metal core@semiconductor shell nanocomposites in heterogeneous photocatalysis, including photocatalytic nonselective processes for environmental remediation, selective organic transformations to fine chemicals and water splitting to clean hydrogen energy. It is hoped that this minireview can inspire multidisciplinary research interest in the precisely morphology-controlled synthesis of a variety of metal core@semiconductor shell nanoassemblies and their wide applications in the realm of heterogeneous photocatalysis.