Palladium Complexes Based on Ylide-Functionalized Phosphines (YPhos): Broadly Applicable High-Performance Precatalysts for the Amination of Aryl Halides at Room Temperature

Harnessing Organopotassium Reagents for Cross-Coupling with YPhos-Pd Catalysts: Opportunities, Applications, and Challenges

With advances in the applications of earth-abundant organopotassium reagents in C-C bond forming processes, this study pioneers Pd-catalyzed cross coupling reactions between aryl halides and a range of aryl and benzylpotassium species generated by direct C-H metalation. Key for the success of this approach is the use of electron-rich ylide-substituted phosphine (YPhos) ligands, which enable fast conversion of the potassium species in solution. This protocol can be carried out in a one-pot manner at room temperature, without the need for purification of the in situ prepared organopotassium compounds or any additional additives, enabling the isolation of a broad scope of coupling products even on a gram-scale.

Palladium-Catalyzed Coupling of Aryl Chlorides with Secondary Phosphines to Construct Unsymmetrical Tertiary Phosphines

The functionalization of the C-Cl bond in unactivated aryl chlorides under mild conditions presents a significant challenge. We disclose a general protocol for constructing both partially and entirely unsymmetrical tertiary phosphines through the Pd/keYPhos-catalyzed coupling of aryl chlorides with secondary phosphines under mild conditions. The reaction exhibits excellent functional group tolerance and broad substrate scopes. Furthermore, the rapid synthesis of ligands and luminescent compound sTPPs, alongside gram-scale systhesis, demonstrates the practical applicability of this method.

Rapid Aminations of Functionalized Aryl Fluorosulfates in Water

Aryl fluorosulfates of varying complexities have been used in amination reactions in water using a new Pd oxidative addition complex (OAC-1) developed specifically to match the needs of the fine chemicals industry, not only in terms of functional group tolerance, but also reflecting time considerations associated with these important C-N couplings. Also especially noteworthy is that they replace both PFAS-related triflates and nonaflates, which are today out of favor due to recent government regulations. The new complex based on the BippyPhos ligand is used at low loadings and under aqueous micellar conditions. Moreover, it is easily prepared and stable to long term storage. DFT calculations on the OAC precatalyst compare well with the X-ray structure of the crystals with π-complexation to the aromatic system of the ligand and also confirm the NMR data showing a mixture of conformers in solution that differ from the X-ray structure in rotation of the phenyl and t-butyl ligand substituents. An extensive variety of coupling partners, including pharmaceutically relevant APIs, readily participate under mild and environmentally responsible reaction conditions.

Reductive Transamination of Pyridinium Salts to N-Aryl Piperidines

Saturated N-heterocycles are found in numerous bioactive natural products and are prevalent in pharmaceuticals and agrochemicals. While there are many methods for their synthesis, each has its limitations, such as scope and functional group tolerance. Herein, we describe a rhodium-catalyzed transfer hydrogenation of pyridinium salts to access N-(hetero)aryl piperidines. The reaction proceeds via a reductive transamination process, involving the initial formation of a dihydropyridine intermediate via reduction of the pyridinium ion with HCOOH, which is intercepted by water and then hydrolyzed. Subsequent reductive amination with an exogenous (hetero)aryl amine affords an N-(hetero)aryl piperidine. This reductive transamination method thus allows for access of N-(hetero)aryl piperidines from readily available pyridine derivatives, expanding the toolbox of dearomatization and skeletal editing.

Design and synthesis of versatile ligand precursors based on phosphonium ylides for palladalactam formation and catalytic investigation

A new series of ligand precursors designed for the synthesis of palladalactams has been developed. These precursors are easily accessible through a one-step reaction involving 2-chloro-N-phenylacetamide and a wide choice of various monophosphines, offering tunable electronic and steric properties within the ligand framework. The stability of both ligand precursors and resulting palladalactams in ambient air enhances their practical applicability. A newly synthesized palladalactam, featuring an electron-donating triethylphosphine moiety on the anionic phosphonium ylide ligand scaffold exhibited promising catalytic activities in the Mizoroki-Heck coupling reaction between aryl chlorides and alkenes. Theoretical calculations further affirmed that the ligand system in the complex is the most electron-donating, forming the strongest Pd-C bond compared to other complexes with alternative phosphine moieties.

Characterization of the Ligand Properties of Donor-stabilized Pnictogenyltrielanes

A general synthesis and the characterization of novel alkyl-substituted NHC-stabilized pnictogenylboranes NHC ⋅ BH2 ER2 (NHC=N-heterocyclic carbene, E=P, As; R2 =Me2 , Ph2 , t BuH, Cy2 , (SiMe3 )2 ) are reported. These compounds were reacted with Ni(CO)4 to the corresponding complexes of the type [(NHC ⋅ BH2 ER2 )Ni(CO)3 ] to determine their donor strength by Tolman Electronic Parameters (TEPs) and their steric demand as ligands compared to classical phosphines, superbasic phosphines and other commonly applied donor systems. The results show that the NHC-stabilized pnictogenyltrielanes can be considered as being highly basic, while their steric influence depends strongly on the organic residues as well as the donor attached to the {BH2 } moiety. Although weaker than commonly used superbasic phosphines, the donor strength of pnictogenyltrielanes in general can be classified as of similar strength as NHCs. The steric and electronic properties can easily be modified by alkyl substitution as evident from the TEP trends.

Nanoparticles as Heterogeneous Catalysts for ppm Pd-Catalyzed Aminations in Water

A general protocol employing heterogeneous catalysis has been developed that enables ppm of Pd-catalyzed C-N cross-coupling reactions under aqueous micellar catalysis. A new nanoparticle catalyst containing specifically ligated Pd, in combination with nanoreactors composed of the designer surfactant Savie, a biodegradable amphiphile, catalyzes C-N bond formations in recyclable water. A variety of coupling partners, ranging from highly functionalized pharmaceutically relevant APIs to educts from the Merck Informer Library, readily participate under these environmentally responsible, sustainable reaction conditions. Other key features associated with this report include the low levels of residual Pd found in the products, the recyclability of the aqueous reaction medium, the use of ocean water as an alternative source of reaction medium, options for the use of pseudohalides as alternative reaction partners, and associated low E factors. In addition, an unprecedented 5-step, one-pot sequence is presented, featuring several of the most widely used transformations in the pharmaceutical industry, suggesting potential industrial applications.

Direct C(3)5-H Polyfluoroarylation of 2-Amino/alkoxy Pyridines Enabled by a Transient and Electron-deficient Palladium Intermediate

Herein, we present an unprecedented azine-limited C5-H polyfluoroarylation of 2-aminopyridines enabled by a transient and electron-deficient perfluoroaryl-Pd species via C-H/C-H coupling. The protocol further allows C3(5)-H polyfluoroarylation of 2-alkoxypyridines guided by sterics and electronics for the first time. The late-stage C-H functionalization of drugs, drug derivatives, and natural product derivatives and synthesis of C5-aryl drug derivatives further demonstrated the method's utility. The preliminary mechanistic studies reveal that the synergistic combination of the bulky yet electrophilic perfluoroaryl-Pd species and the partial nucleophilicity of the C5-position of 2-amino/alkoxy-pyridines is the origin of reactivity and selectivity. Importantly, the first experimental evidence for the role of diisopropyl sulfide is provided.

Computer-Driven Development of Ylide Functionalized Phosphines for Palladium-Catalyzed Hiyama Couplings

Palladium-catalyzed couplings of silicon enolates with aryl electrophiles are of great synthetic utility, but often limited to expensive bromide substrates. A comparative experimental study confirmed that none of the established ligand systems allows to couple inexpensive aryl chlorides with α-trimethylsilyl alkylnitriles. In contrast, ylide functionalized phosphines (YPhos) led to encouraging results. A statistical model was developed that correlates the reaction yields with ligand features. It was employed to predict catalyst structures with superior performance. With this cheminformatics approach, YPhos ligands were tailored specifically to the demands of Hiyama couplings. The newly synthesized ligands displayed record-setting activities, enabling the elusive coupling of aryl chlorides with α-trimethylsilyl alkyl nitriles. The preparative utility of the catalyst system was demonstrated by the synthesis of pharmaceutically meaningful α-aryl alkylnitriles, α-arylcarbonyls and biaryls.

Formation of exceptional monomeric YPhos-PdCl2 complexes with high activities in coupling reactions

The use of well-defined palladium(ii) complexes as precatalysts for C-X cross-coupling reactions has improved the use of palladium catalysts in organic synthesis including large-scale processes. Whereas sophisticated Pd(ii) precursors have been developed in the past years to facilitate catalyst activation as well as the handling of systems with more advanced monophosphine ligands, we herein report that simple PdCl₂ complexes function as efficient precatalysts for ylide-substituted phosphines (YPhos). These complexes are readily synthesized from PdCl₂ sources and form unprecedented monomeric PdCl₂ complexes without the need for any additional coligand. Instead, these structures are stabilized through a unique bonding motif, in which the YPhos ligands bind to the metal through the adjacent phosphine and ylidic carbon site. DFT calculations showed that these bonds are both dative interactions with the stronger interaction originating from the electron-rich phosphine donor. This bonding mode leads to a remarkable stability even towards air and moisture. Nonetheless, the complexes readily form monoligated LPd(0) complexes and thus the active palladium(0) species in coupling reactions. Accordingly, the YPhos-PdCl₂ complexes serve as highly efficient precatalysts for a series of C-C and C-X coupling reactions. Despite their simplicity they can compete with the efficiency of more complex and less stable precatalysts.

Ylide-Substituted Phosphines: A Platform of Strong Donor Ligands for Gold Catalysis and Palladium-Catalyzed Coupling Reactions

The development of homogeneous catalysts is strongly connected to the design of new, sophisticated ligands, which resolve limitations of a given reaction protocol by manipulating the electronic properties of the metal and its spatial environment. Phosphines are a privileged class of ligands that find applications in many catalytic transformations, ranging from hydrogenation reactions to hydroformylation and coupling chemistry. For many years, chemists have been trying to improve the efficiency, selectivity, and application of coupling reactions. The use of highly electron-rich and bulky phosphines was often associated with increased selectivity and efficiency and led to the development of a vast variety of electron-rich alkyl-substituted phosphines. However, this concept of increasing the ligand donor strength reaches its limits with the use of trialkyl-substituted phosphines with tri-tert-butylphosphine thus being one of the most active ligands for many years. In the course of our research efforts to use the special donor strength of ylides to stabilize electron-deficient, low-valent main group compounds, we realized that ylide-substituted phosphine (YPhos) ligands possess remarkably strong donor abilities. Moreover, the YPhos ligands are highly tunable by changing the nature of the groups on the phosphonium, phosphine, or central ylidic carbon atom. We thus obtained a ligand platform with donor capabilities ranging from PCy₃ to even stronger donor abilities than N-heterocyclic carbenes, while being more sterically demanding than simple phosphines as well as many well-known biarylphosphine ligands.These properties led us to explore the applicability of the YPhos ligands in catalysis. In a series of recent reports, our group applied YPhos ligands in gold and palladium catalyzed reactions at catalytic loadings applicable for medium- to large-scale applications. The increased donor strength and unique architecture allowed for remarkable activities in a series of transformations at mild reactions conditions. For gold(I)-catalyzed reactions, we obtained turnover numbers (TONs) for the hydroamination of phenylacetylene with aniline of over 20 000. Also, more complex reactions were easily catalyzed with efficiencies greater than those of other known gold(I) catalysts. Similar efficacies were found in a series of palladium-catalyzed coupling reactions. In Buchwald-Hartwig aminations, unprecedented activities for the amination of aryl chlorides were reached at room temperature. The speed of formation of the catalytically active mono-YPhos palladium species allowed for some of the amination reactions to be completed in only a few minutes. Adjustment of the ligand design enabled the use of a large variety of different aryl and alkyl amines of different steric demands. Furthermore, the YPhos ligands in general showed high activities and selectivity in the coupling of a variety of carbon nucleophiles with aryl chlorides, bromides, and triflates. This enabled the development of efficient reaction protocols for the α-arylation of unhindered ketones and the coupling of Grignard and zinc reagents as well as the first efficient coupling of chloroarenes with alkyllithium compounds. This Account summarizes the recent development of YPhos ligands and their application in gold and palladium catalysis. We also hope to stimulate further use of this ligand platform in catalysis in the future.

Ylide-Stabilized Phosphenium Cations: Impact of the Substitution Pattern on the Coordination Chemistry

Although N-heterocyclic phosphenium (NHP) cations have received considerable research interest due to their application in organocatalysis, including asymmetric synthesis, phosphenium cations with other substitution patterns have hardly been explored. Herein, the preparation of a series of ylide-substituted cations of type [YPR]+ (with Y=Ph3 PC(Ph), R=Ph, Cy or Y) and their structural and coordination properties are reported. Although the diylide-substituted cation forms spontaneous from the chlorophosphine precursor, the monoylidylphosphenium ions required the addition of a halide-abstraction reagent. The molecular structures of the cations reflected the different degrees of electron donation from the ylide to the phosphorus center depending on the second substituent. Molecular orbital analysis confirmed the stronger donor properties of the ylide systems compared to NHPs with the mono-ylide substituted cations featuring a more pronounced electrophilicity. This was mirrored by the reaction of the cations towards gold chloride, in which only the diylide-substituted cation [Y2 P]+ formed the expected LAuCl]+ complex, while the monoylide-substituted compounds reacted to the chlorophosphine ligands by transfer of the chloride from gold to the phosphorus center. These results demonstrate the tunability of ylide-functionalized phosphorus cations, which should allow for further applications in coordination chemistry in the future.

Tris(tetramethylguanidinyl)phosphine: The Simplest Non-ionic Phosphorus Superbase and Strongly Donating Phosphine Ligand

We report the synthesis and properties of the much sought-after tris(1,1,3,3-tetramethylguanidinyl) phosphine P(tmg)3 , a crystalline, superbasic phosphine accessible through a short and scalable procedure from the cheap and commercially available bulk chemicals 1,1,3,3-tetramethylguanidine, tris(dimethylamino)-phosphine and phosphorus trichloride. The new phosphine exhibits exceptional electron donor properties and readily forms transition metal complexes with gold(I), palladium(II) and rhodium(I) precursors. The formation of zwitterionic Lewis base adducts with carbon dioxide and sulfur dioxide was explored. In addition, the complete series of phosphine chalcogenides was prepared from the reaction of P(tmg)3 with N2 O and the elemental chalcogens.

Synthesis of Sterically Encumbered Di- and Triarylamines by Palladium-Catalysed C-N Coupling Reactions at Mild Reaction Conditions

The synthesis of bulky, ortho-substituted triarylamines often represents a synthetic challenge, but is highly desirable due to the use of these compounds in organic electronics. Here, we report on a...

Metal-catalyzed reactions for the C(sp2)–N bond formation: achievements of recent years

The review deals with the main catalytic methods for the C(sp2)–N bond formation, including Buchwald–Hartwig palladium-catalyzed amination of aryl and heteroaryl halides, renaissance of the Ullmann chemistry, i.e., the application of catalysis by copper complexes to form the carbon–nitrogen bond, and Chan–Lam reactions of (hetero)arylboronic acids with amines. Also, oxidative amination with C–H activation, which has been booming during the last decade, is addressed. Particular attention is paid to achievements in the application of heterogenized catalysts.

The bibliography includes 350 references.

Halogen-Bridged Methylnaphthyl Palladium Dimers as Versatile Catalyst Precursors in Coupling Reactions

Halogen‐bridged methylnaphthyl (MeNAP) palladium dimers are presented as multipurpose Pd‐precursors, ideally suited for catalytic method development and preparative organic synthesis. By simply mixing with phosphine or carbene ligands, they are in situ converted into well‐defined monoligated complexes. Their catalytic performance was benchmarked against state‐of‐the‐art systems in challenging Buchwald–Hartwig, Heck, Suzuki and Negishi couplings, and ketone arylations. Their use enabled record‐setting activities, beyond those achievable by optimization of the ligand alone. The MeNAP catalysts permit syntheses of tetra‐ortho‐substituted arenes and bulky anilines in near‐quantitative yields at room temperature, allow mono‐arylations of small ketones, and enable so far elusive cross‐couplings of secondary alkyl boronic acids with aryl chlorides.

Synthesis, Crystal and Electronic Structures of a Thiophosphinoyl- and Amino-Substituted Metallated Ylide

α-Metallated ylides have revealed themselves to be versatile reagents for the introduction of ylide groups. Herein, we report the synthesis of the thiophosphinoyl and piperidyl (Pip) substituted α-metallated ylide [Ph2 (Pip)P=C-P(S)Ph2 ]M (M=Li, Na, K) through a four-step synthetic procedure starting from diphenylmethylphosphine sulfide. Metallation of the ylide intermediate was successfully accomplished with different alkali metal bases delivering the lithium, sodium and potassium salts, the latter isolable in high yields. Structure analyses of the lithium and potassium compounds in the solid state with and without crown ether revealed different aggregates (monomer, dimer and hexamer) with the metals coordinated by the thiophosphoryl moiety and ylidic carbon atom. Although the piperidyl group does not coordinate to the metal, it significantly contributes to the stability of the yldiide by charge delocalization through negative hyperconjugation.

Au⋅⋅⋅H-C Hydrogen Bonds as Design Principle in Gold(I) Catalysis

Secondary ligand-metal interactions are decisive in many catalytic transformations. While arene-gold interactions have repeatedly been reported as critical structural feature in many high-performance gold catalysts, we herein report that these interactions can also be replaced by Au⋅⋅⋅H-C hydrogen bonds without suffering any reduction in catalytic performance. Systematic experimental and computational studies on a series of ylide-substituted phosphines featuring either a PPh3 (Ph YPhos) or PCy3 (Cy YPhos) moiety showed that the arene-gold interaction in the aryl-substituted compounds is efficiently compensated by the formation of Au⋅⋅⋅H-C hydrogen bonds. The strongest interaction is found with the C-H moiety next to the onium center, which due to the polarization results in remarkably strong interactions with the shortest Au⋅⋅⋅H-C hydrogen bonds reported to date. Calorimetric studies on the formation of the gold complexes further confirmed that the Ph YPhos and Cy YPhos ligands form similarly stable complexes. Consequently, both ligands showed the same catalytic performance in the hydroamination, hydrophenoxylation and hydrocarboxylation of alkynes, thus demonstrating that Au⋅⋅⋅H-C hydrogen bonds are equally suited for the generation of highly effective gold catalysts than gold-arene interactions. The generality of this observation was confirmed by a comparative study between a biaryl phosphine ligand and its cyclohexyl-substituted derivative, which again showed identical catalytic performance. These observations clearly support Au⋅⋅⋅H-C hydrogen bonds as fundamental secondary interactions in gold catalysts, thus further increasing the number of design elements that can be used for future catalyst construction.

Ylide-Substituted Phosphines with a Cyclic Ylide-Backbone: Angle Dependence of the Donor Strength

Ylide-substituted phosphines (YPhos) have been shown to be highly electron-rich and efficient ligands in a variety of palladium catalyzed transformations. Here, the synthesis and characterization of novel YPhos ligands containing a cyclic backbone architecture are reported. The ligands are easily synthesized from a cyclic phosphonium salt and the chlorophosphines Cy2PCl (L1) and Cy(FluMe)PCl (L2, with FluMe = 9-methylfluorenyl) and were characterized in both solution and solid states. The smaller PCy2-substituted ligand, L1, readily formed the biscoordinate L1 2 Pd species when treated with Pd2(dba)3 and showed no activity in palladium-catalyzed amination reactions even when applied as defined palladium(II) η3-allyl, t-Bu-indenyl, or cinnamyl precursors. Bulkier fluorenyl-substituted ligand L2 similarly was inactive, despite its ability to form the stable monophosphine complex L2·Pd(dba). Assessment of the electronic properties by experimental and computational methods revealed that L1 and L2 are considerably less electron-rich than previously synthesized YPhos ligands. This was shown to be the result of the small P-C-S bond angle, which is sterically enforced due to the cyclic nature of the backbone. Density functional theory calculations revealed that the small angle results in an increased s-character of the lone pair at the ylidic carbon atom and leads to a polarization of the C-P bond toward the carbon atom, thus decreasing the electron density at the phosphorus atom. The results demonstrate the tunability of the donor strength of YPhos ligands by modification of the ligand backbone beyond simple changes of the substitution pattern and are thus important for future ligand design, with a careful balance of many factors to be considered to achieve catalytic activity.

Design of Novel Uncharged Organic Superbases: Merging Basicity and Functionality

ConspectusOne of the constant challenges of synthetic chemistry is the molecular design and synthesis of nonionic, metal-free superbases as chemically stable neutral organic compounds of moderate molecular weight, intrinsically high thermodynamic basicity, adaptable kinetic basicity, and weak or tunable nucleophilicity at their nitrogen, phosphorus, or carbon basicity centers. Such superbases can catalyze numerous reactions, ranging from C-C bond formation to cycloadditions and polymerization, to name just a few. Additional benefits of organic superbases, as opposed to their inorganic counterparts, are their solubility in organic reaction media, mild reaction conditions, and higher selectivity. Approaching such superbasic compounds remains a continuous challenge. However, recent advances in synthetic methodology and theoretical understanding have resulted in new design principles and synthetic strategies toward superbases. Our computational contributions have demonstrated that the gas-phase basicity region of 350 kcal mol^-1 and even beyond is easily reachable by organosuperbases. However, despite record-high basicities, the physical limitations of many of these compounds become quickly evident. The typically large molecular weight of these molecules and their sensitivity to ordinary reaction conditions prevent them from being practical, even though their preparation is often not too difficult. Thus, obviously structural limitations with respect to molecular weight and structural complexity must be imposed on the design of new synthetically useful organic superbases, but strategies for increasing their basicity remain important.The contemporary design of novel organic superbases is illustrated by phosphazenyl phosphanes displaying gas-phase basicities (GB) above 300 kcal mol^-1 but having molecular weights well below 1000 g·mol^-1. This approach is based on a reconsideration of phosphorus(III) compounds, which goes along with increasing their stability in solution. Another example is the preparation of carbodiphosphoranes incorporating pyrrolidine, tetramethylguanidine, or hexamethylphosphazene as a substituent. With gas-phase proton affinities of up to 300 kcal mol^-1, they are among the top nonionic carbon bases on the basicity scale. Remarkably, the high basicity of these compounds is achieved at molecular weights of around 600 g·mol^-1. Another approach to achieving high basicity through the cooperative effect of multiple intramolecular hydrogen bonding, which increases the stabilization of conjugate acids, has recently been confirmed.This Account focuses on our efforts to produce superbasic molecules that embody many desirable traits, but other groups' approaches will also be discussed. We reveal the crucial structural features of superbases and place them on known basicity scales. We discuss the emerging potential and current limits of their application and give a general outlook into the future.

Phosphorus-Containing Superbases: Recent Progress in the Chemistry of Electron-Abundant Phosphines and Phosphazenes

The renaissance of Brønsted superbases is primarily based on their pronounced capacity for a large variety of chemical transformations under mild reaction conditions. Four major set screws are available for the selective tuning of the basicity: the nature of the basic center (N, P, …), the degree of electron donation by substituents to the central atom, the possibility of charge delocalization, and the energy gain by hydrogen bonding. Within the past decades, a plethora of neutral electron-rich phosphine and phosphazene bases have appeared in the literature. Their outstanding properties and advantages over inorganic or charged bases have now made them indispensable as auxiliary bases in deprotonation processes. Herein, an update of the chemistry of basic phosphines and phosphazenes is given. In addition, due to widespread interest, their use in catalysis or as ligands in coordination chemistry is highlighted.

Synthesis and catalytic activity of palladium complexes bearing N-heterocyclic carbenes (NHCs) and 1,4,7-triaza-9-phosphatricyclo[5.3.2.1]tridecane (CAP) ligands

The synthesis and characterization of novel palladium complexes bearing N-heterocyclic carbenes (NHCs) and 1,4,7-triaza-9-phosphatricyclo[5.3.2.1]tridecane (CAP) are reported. These organometallic complexes can be easily obtained using two different synthetic strategies that involve either the substitution of the pyridine ligand from trans-[Pd(NHC)(Py)Cl2] or by simple addition of the CAP ligand to dimeric species [Pd(NHC)Cl2]2. The mixed NHC/CAP complexes were tested as pre-catalysts in the Buchwald-Hartwig aryl amination coupling, showing good catalytic activity, especially in the case of cis-[Pd(IPr)(CAP)Cl2].

Direct and straightforward transfer of C1 functionalized synthons to phosphorous electrophiles for accessing gem-P-containing methanes

The direct transfer of different α-substituted methyllithium reagents to chlorinated phosphorous electrophiles of diverse oxidation state (phosphates, phosphine oxides and phosphines) is proposed as an effective strategy to synthesize geminal P-containing methanes. The methodology relies on the efficient nucleophilic substitution conducted on the P-chlorine linkage. Uniformly high yields are observed regardless the specific nature of the carbanion employed: once established the conditions for generating the competent nucleophile (LiCH₂Hal, LiCHHal₂, LiCH₂CN, LiCH₂SeR etc.) the homologated compounds are obtained via a single operation. Some P-containing formal carbanions have been evaluated in transferring processes, including the carbonyl-difluoromethylation of the opioid agent Hydrocodone.

Coupling of Reformatsky Reagents with Aryl Chlorides Enabled by Ylide-Functionalized Phosphine Ligands

The coupling of aryl chlorides with Reformatsky reagents is a desirable strategy for the construction of α‐aryl esters but has so far been substantially limited in the substrate scope due to many challenges posed by various possible side reactions. This limitation has now been overcome by the tailoring of ylide‐functionalized phosphines to fit the requirements of Negishi couplings. Record‐setting activities were achieved in palladium‐catalyzed arylations of organozinc reagents with aryl electrophiles using a cyclohexyl‐YPhos ligand bearing an ortho‐tolyl‐substituent in the backbone. This highly electron‐rich, bulky ligand enables the use of aryl chlorides in room temperature couplings of Reformatsky reagents. The reaction scope covers diversely functionalized arylacetic and arylpropionic acid derivatives. Aryl bromides and chlorides can be converted selectively over triflate electrophiles, which permits consecutive coupling strategies.

Aryl Amination Using Soluble Weak Base Enabled by a Water-Assisted Mechanism

The amination of aryl halides has become one of the most commonly practiced C-N bond-forming reactions in pharmaceutical and laboratory syntheses. The widespread use of strong or poorly soluble inorganic bases for amine activation nevertheless complicates the compatibility of this important reaction class with sensitive substrates as well as applications in flow and automated synthesis, to name a few. We report a palladium-catalyzed C-N coupling using Et₃N as a weak, soluble base, which allows a broad substrate scope that includes bromo- and chloro(hetero)arenes, primary anilines, secondary amines, and amide type nucleophiles together with tolerance for a range of base-sensitive functional groups. Mechanistic data have established a unique pathway for these reactions in which water serves multiple beneficial roles. In particular, ionization of a neutral catalytic intermediate via halide displacement by H₂O generates, after proton loss, a coordinatively unsaturated Pd-OH species that can bind amine substrate triggering intramolecular N-H heterolysis. This water-assisted pathway operates efficiently with even weak terminal bases, such as Et₃N. The use of a simple, commercially available ligand, PAd₃, is key to this water-assisted mechanism by promoting coordinative unsaturation in catalytic intermediates responsible for the heterolytic activation of strong element-hydrogen bonds, which enables broad compatibility of carbon-heteroatom cross-coupling reactions with sensitive substrates and functionality.

Trialkylphosphines Having a Bulky Phosphacyclopentane Backbone: Structural and Redox Properties Depending on the Exocyclic Alkyl Groups and EPR Observation of a Persistent Trialkylphosphine Radical Cation

Bulky phosphines and their redox properties have received increased attention in the view of useful auxiliary ligands for transition metal catalysts and Lewis-base components of frustrated Lewis pairs for chemical transformations. Herein we report the synthesis, structure, and properties of a series of trialkylphosphines 2R (R = methyl, ethyl, isopropyl, tert-butyl, 1-adamantyl) that possess the bulky 2,2,5,5-tetrakis(trimethylsilyl)-1-phosphacyclopentane as a structural backbone. Among these phosphines, 2Ad, which contains an adamantyl moiety, has a very large buried volume (%V_bur) for a trialkylphosphine (62.0) and shows a quasi-reversible oxidative wave at a lower oxidation potential (-0.12 V in CH₂Cl₂, vs ferrocene/ferrocenium couple) by cyclic voltammetry. The reaction of 2Ad with AgPF₆ afforded a cationic silver aquo complex [Ag(2Ad)(H₂O)]⁺[PF₆]^-, whereas the reaction with NOSbF₆ gave a persistent phosphine radical cation [2Ad]^•+. Based on the EPR spectra and DFT studies, the spin and positive charge of [2Ad]^•+ are localized on the phosphorus atom.

Efficient Pd-Catalyzed Direct Coupling of Aryl Chlorides with Alkyllithium Reagents

Organolithium compounds are amongst the most important organometallic reagents and frequently used in difficult metallation reactions. However, their direct use in the formation of C-C bonds is less established. Although remarkable advances in the coupling of aryllithium compounds have been achieved, Csp2 -Csp3 coupling reactions are very limited. Herein, we report the first general protocol for the coupling or aryl chlorides with alkyllithium reagents. Palladium catalysts based on ylide-substituted phosphines (YPhos) were found to be excellently suited for this transformation giving high selectivities at room temperature with a variety of aryl chlorides without the need for an additional transmetallation reagent. This is demonstrated in gram-scale synthesis including building blocks for materials chemistry and pharmaceutical industry. Furthermore, the direct coupling of aryllithiums as well as Grignard reagents with aryl chlorides was also easily accomplished at room temperature.

Development of an Aryl Amination Catalyst with Broad Scope Guided by Consideration of Catalyst Stability

We have developed a new dialkylbiaryl monophosphine ligand, GPhos, that supports a palladium catalyst capable of promoting carbon-nitrogen cross-coupling reactions between a variety of primary amines and aryl halides; in many cases, these reactions can be carried out at room temperature. The reaction development was guided by the idea that the productivity of catalysts employing BrettPhos-like ligands is limited by their lack of stability at room temperature. Specifically, it was hypothesized that primary amine and N-heteroaromatic substrates can displace the phosphine ligand, leading to the formation of catalytically dormant palladium complexes that reactivate only upon heating. This notion was supported by the synthesis and kinetic study of a putative off-cycle Pd complex. Consideration of this off-cycle species, together with the identification of substrate classes that are not effectively coupled at room temperature using previous catalysts, led to the design of a new dialkylbiaryl monophosphine ligand. An Ot-Bu substituent was added ortho to the dialkylphosphino group of the ligand framework to improve the stability of the most active catalyst conformer. To offset the increased size of this substituent, we also removed the para i-Pr group of the non-phosphorus-containing ring, which allowed the catalyst to accommodate binding of even very large α-tertiary primary amine nucleophiles. In comparison to previous catalysts, the GPhos-supported catalyst exhibits better reactivity both under ambient conditions and at elevated temperatures. Its use allows for the coupling of a range of amine nucleophiles, including (1) unhindered, (2) five-membered-ring N-heterocycle-containing, and (3) α-tertiary primary amines, each of which previously required a different catalyst to achieve optimal results.

Phosphorus-ylides: powerful substituents for the stabilization of reactive main group compounds

Phosphorus ylides are 1,2-dipolar compounds with a negative charge on the carbon atom. This charge is stabilized by the neighbouring onium moiety, but can also be shifted towards other substituents thus making ylides strong π donor ligands and hence ideal substituents to stabilize reactive compounds such as cations and low-valent main group species. Furthermore, the donor strength and the steric properties can easily be tuned to meet different requirements for stabilizing reactive compounds and for tailoring the properties and reactivities of the main group element. Although the use of ylide substituents in main group chemistry is still in its infancy, the first examples of isolated compounds impressively demonstrate the potential of these ligands. This review summarizes the most important discoveries also in comparison to other substituents, thus outlining avenues for future research directions.

Understanding existing and designing novel synthetic routes to Pd-PEPPSI-NHC and Pd-PEPPSI-PR3 pre-catalysts

The reaction mechanism leading to the formation of cross-coupling palladium pre-catalysts of the PEPPSI family was investigated. Two intermediates were isolated and proved to be both suitable synthons to the pre-catalysts, with one permitting the design of a novel and greener user-friendly synthetic route. In light of this mechanistic understanding, the traditional one-pot method was shown to be possible using stoichiometric amounts of throw-away ligand, which represents a considerable synthetic improvement over the wasteful "in pyridine" approach.

Synthesis, Isolation and Crystal Structures of the Metalated Ylides [Cy3P-C-SO2Tol]M (M = Li, Na, K)

The preparation and isolation of the metalated ylides [Cy₃PCSO₂Tol]M (^Cy1‐M) (with M = Li, Na, K) are reported. In contrast to its triphenylphosphonium analogue the synthesis of ^Cy1‐M revealed to be less straight forward. Synthetic routes to the phosphonium salt precursor ^Cy1‐H₂ via different methods revealed to be unsuccessful or low‐yielding. However, nucleophilic attack of the ylide Cy₃P = CH₂ at toluenesulfonyl fluoride under basic conditions proved to be a high‐yielding method directly leading to the ylide ^Cy1‐H. Metalation to the yldiides was finally achieved with strong bases such as nBuLi, NaNH₂, or BnK. In the solid state, the lithium compound forms a tetrameric structure consisting of a (C–S–O–Li)₄ macrocycle, which incorporates an additional molecule of lithium iodide. The potassium compound forms a C₄‐symmetric structure with a (K₄O₄)₂ octahedral prism as central structural motif. Upon deprotonation the P–C–S linkage undergoes a remarkable contraction typical for metalated ylides.

Palladium Complexes Based on Ylide-Functionalized Phosphines (YPhos): Broadly Applicable High-Performance Precatalysts for the Amination of Aryl Halides at Room Temperature

Palladium allyl, cinnamyl, and indenyl complexes with the ylide-substituted phosphines Cy3 P+ -C- (R)PCy2 (with R=Me (L1) or Ph (L2)) and Cy3 P+ -C- (Me)PtBu2 (L3) were prepared and applied as defined precatalysts in C-N coupling reactions. The complexes are highly active in the amination of 4-chlorotoluene with a series of different amines. Higher yields were observed with the precatalysts in comparison to the in situ generated catalysts. Changes in the ligand structures allowed for improved selectivities by shutting down β-hydride elimination or diarylation reactions. Particularly, the complexes based on L2 (joYPhos) revealed to be universal precatalysts for various amines and aryl halides. Full conversions to the desired products are reached mostly within 1 h reaction time at room temperature, thus making L2 to one of the most efficient ligands in C-N coupling reactions. The applicability of the catalysts was demonstrated for aryl chlorides, bromides and iodides together with primary and secondary aryl and alkyl amines, including gram-scale applications also with low catalyst loadings of down to 0.05 mol %. Kinetic studies further demonstrated the outstanding activity of the precatalysts with TOF over 10.000 h-1 .