Separating centrosomes interact in the absence of associated chromosomes during mitosis in cultured vertebrate cells

Cytoplasmic flow is a cell size sensor that scales anaphase

During early embryogenesis, fast mitotic cycles without interphase lead to a decrease in cell size, while scaling mechanisms must keep cellular structures proportional to cell size. For instance, as cells become smaller, if the position of nuclear envelope reformation (NER) did not adapt, NER would have to occur beyond the cell boundary. Here we found that NER position in anaphase scales with cell size via changes in chromosome motility, mediated by cytoplasmic flows that themselves scale with cell size. Flows are a consequence of friction between viscous cytoplasm and bulky cargo transported by dynein on astral microtubules. As an emerging property, confinement in cells of different sizes yields scaling of cytoplasmic flows. Thus, flows behave like a cell geometry sensor: astral microtubules approach the boundary causing flow velocity changes, which then affect the velocity of chromosome separation, thus scaling NER.

Mechanical Torque Promotes Bipolarity of the Mitotic Spindle Through Multi-centrosomal Clustering

Intracellular forces shape cellular organization and function. One example is the mitotic spindle, a cellular machine consisting of multiple chromosomes and centrosomes which interact via dynamic microtubule filaments and motor proteins, resulting in complicated spatially dependent forces. For a cell to divide properly, it is important for the spindle to be bipolar, with chromosomes at the center and multiple centrosomes clustered into two 'poles' at opposite sides of the chromosomes. Experimental observations show that in unhealthy cells, the spindle can take on a variety of patterns. What forces drive each of these patterns? It is known that attraction between centrosomes is key to bipolarity, but what prevents the centrosomes from collapsing into a monopolar configuration? Here, we explore the hypothesis that torque rotating chromosome arms into orientations perpendicular to the centrosome-centromere vector promotes spindle bipolarity. To test this hypothesis, we construct a pairwise-interaction model of the spindle. On a continuum version of the model, an integro-PDE system, we perform linear stability analysis and construct numerical solutions which display a variety of spatial patterns. We also simulate a discrete particle model resulting in a phase diagram that confirms that the spindle bipolarity emerges most robustly with torque. Altogether, our results suggest that rotational forces may play an important role in dictating spindle patterning.

Mechanics of Multicentrosomal Clustering in Bipolar Mitotic Spindles

To segregate chromosomes in mitosis, cells assemble a mitotic spindle, a molecular machine with centrosomes at two opposing cell poles and chromosomes at the equator. Microtubules and molecular motors connect the poles to kinetochores, specialized protein assemblies on the centromere regions of the chromosomes. Bipolarity of the spindle is crucial for the proper cell division, and two centrosomes in animal cells naturally become two spindle poles. Cancer cells are often multicentrosomal, yet they are able to assemble bipolar spindles by clustering centrosomes into two spindle poles. Mechanisms of this clustering are debated. In this study, we computationally screen effective forces between 1) centrosomes, 2) centrosomes and kinetochores, 3) centrosomes and chromosome arms, and 4) centrosomes and cell cortex to understand mechanics that determines three-dimensional spindle architecture. To do this, we use the stochastic Monte Carlo search for stable mechanical equilibria in the effective energy landscape of the spindle. We find that the following conditions have to be met to robustly assemble the bipolar spindle in a multicentrosomal cell: 1) the strengths of centrosomes' attraction to each other and to the cell cortex have to be proportional to each other and 2) the strengths of centrosomes' attraction to kinetochores and repulsion from the chromosome arms have to be proportional to each other. We also find that three other spindle configurations emerge if these conditions are not met: 1) collapsed, 2) monopolar, and 3) multipolar spindles, and the computational screen reveals mechanical conditions for these abnormal spindles.

Dynein antagonizes eg5 by crosslinking and sliding antiparallel microtubules

Mitotic spindle assembly requires the combined activity of various molecular motor proteins, including Eg5 and dynein. Together, these motors generate antagonistic forces during mammalian bipolar spindle assembly; what remains unknown, however, is how these motors are functionally coordinated such that antagonism is possible. Given that Eg5 generates an outward force by crosslinking and sliding apart antiparallel microtubules (MTs), we explored the possibility that dynein generates an inward force by likewise sliding antiparallel MTs. We reasoned that antiparallel overlap, and therefore the magnitude of a dynein-mediated force, would be inversely proportional to the initial distance between centrosomes. To capitalize on this relationship, we utilized a nocodazole washout assay to mimic spindle assembly. We found that Eg5 inhibition led to either monopolar or bipolar spindle formation, depending on whether centrosomes were initially separated by less than or greater than 5.5 microm, respectively. Mathematical modeling predicted this same spindle bistability in the absence of functional Eg5 and required dynein acting on antiparallel MTs to do so. Our results suggest that dynein functionally coordinates with Eg5 by crosslinking and sliding antiparallel MTs, a novel role for dynein within the framework of spindle assembly.

Microtubule motors in eukaryotic spindle assembly and maintenance

The spindle is a microtubule-based structure that facilitates chromosome segregation during mitosis and meiosis. Spindle assembly from dynamic microtubule building blocks is a major challenge for the dividing cell and a process that critically requires microtubule motors. In this review we focus on the mechanisms by which microtubule motors shape the spindle. Specifically, we address how motors are thought to move and arrange microtubules to form the characteristic bipolar morphology shared by all eukaryotic spindles as well as motor-dependent mechanisms of microtubule length regulation.

Relative contributions of chromatin and kinetochores to mitotic spindle assembly

During mitosis and meiosis in animal cells, chromosomes actively participate in spindle assembly by generating a gradient of Ran guanosine triphosphate (RanGTP). A high concentration of RanGTP promotes microtubule nucleation and stabilization in the vicinity of chromatin. However, the relative contributions of chromosome arms and centromeres/kinetochores in this process are not known. In this study, we address this issue using cells undergoing mitosis with unreplicated genomes (MUG). During MUG, chromatin is rapidly separated from the forming spindle, and both centrosomal and noncentrosomal spindle assembly pathways are active. MUG chromatin is coated with RCC1 and establishes a RanGTP gradient. However, a robust spindle forms around kinetochores/centromeres outside of the gradient peak. When stable kinetochore microtubule attachment is prevented by Nuf2 depletion in both MUG and normal mitosis, chromatin attracts astral microtubules but cannot induce spindle assembly. These results support a model in which kinetochores play the dominant role in the chromosome-mediated pathway of mitotic spindle assembly.

Chromosome segregation: centromeres get bent

Work over the last several decades has shown that kinetochores play an active part in chromosome segregation, while the chromatin and, more to the point, the DNA have gathered little attention. In two intriguing papers, the Bloom and Khodjakov groups show that intercentromeric chromatin plays a much more active part in chromosome segregation than previously suspected.

Assembly of microtubules and actomyosin rings in the absence of nuclei and spindle pole bodies revealed by a novel genetic method

BACKGROUND

The nucleus and the centrosomes (spindle pole bodies; SPBs in yeast) are believed to play key roles in the organization of various cellular structures, such as the actomyosin ring and microtubules. The ability to generate cells lacking nuclei and centrosomes (SPBs) is key to the elucidation of the role of these structures in various cellular processes.

METHODOLOGY/PRINCIPAL FINDINGS

Here we describe a genetic method, using the Schizosaccharomyces pombe cdc16-116 mutant, to reliably and efficiently generate fission yeast cells lacking nuclei and SPBs. We use this approach to show that the assembly of microtubules does not require nuclear associated microtubule organizing centers and SPBs. We also show that actomyosin rings can assemble albeit inefficiently in the absence of nuclei and SPBs.

CONCLUSION

We conclude that key cytoskeletal elements can be assembled in the absence of nuclei and SPBs. In addition, the approach we describe, taken together with physical approaches such as centrifugation, should facilitate the investigation of the role of the nucleus and SPBs in the assembly and inheritance of various cellular structures and organelles.

Mechanisms of spindle-pole organization are influenced by kinetochore activity in mammalian cells

The spindle is a fusiform bipolar-microtubule array that is responsible for chromosome segregation during mitosis. Focused poles are an essential feature of spindles in vertebrate somatic cells, and pole focusing has been shown to occur through a centrosome-independent self-organization mechanism where microtubule motors cross-link and focus microtubule minus ends. Most of our understanding of this mechanism for pole focusing derives from studies performed in cell-free extracts devoid of centrosomes and kinetochores. Here, we examine how sustained force from kinetochores influences the mechanism of pole focusing in cultured cells. We show that the motor-driven self-organization activities associated with NuMA (i.e., cytoplasmic dynein) and HSET are not necessary for pole focusing if sustained force from kinetochores is inhibited in Nuf2- or Mis12-deficient cells. Instead, pole organization relies on TPX2 as it cross-links spindle microtubules to centrosome-associated mitotic asters. Thus, both motor-driven and static-cross-linking mechanisms contribute to spindle-pole organization, and kinetochore activity influences the mechanism of spindle-pole organization. The motor-driven self-organization of microtubule minus ends at spindle poles is needed to organize spindle poles in vertebrate somatic cells when kinetochores actively exert force on spindle microtubules.

Kinesin 6 family member Subito participates in mitotic spindle assembly and interacts with mitotic regulators

Drosophila Subito is a kinesin 6 family member and ortholog of mitotic kinesin-like protein (MKLP2) in mammalian cells. Based on the previously established requirement for Subito in meiotic spindle formation and for MKLP2 in cytokinesis, we investigated the function of Subito in mitosis. During metaphase, Subito localized to microtubules at the center of the mitotic spindle, probably interpolar microtubules that originate at the poles and overlap in antiparallel orientation. Consistent with this localization pattern, subito mutants improperly assembled microtubules at metaphase, causing activation of the spindle assembly checkpoint and lagging chromosomes at anaphase. These results are the first demonstration of a kinesin 6 family member with a function in mitotic spindle assembly, possibly involving the interpolar microtubules. However, the role of Subito during mitotic anaphase resembles other kinesin 6 family members. Subito localizes to the spindle midzone at anaphase and is required for the localization of Polo, Incenp and Aurora B. Genetic evidence suggested that the effects of subito mutants are attenuated as a result of redundant mechanisms for spindle assembly and cytokinesis. For example, subito double mutants with ncd, polo, Aurora B or Incenp mutations were synthetic lethal with severe defects in microtubule organization.

Microtubule-associated proteins and their essential roles during mitosis

Microtubules play essential roles during mitosis, including chromosome capture, congression, and segregation. In addition, microtubules are also required for successful cytokinesis. At the heart of these processes is the ability of microtubules to do work, a property that derives from their intrinsic dynamic behavior. However, if microtubule dynamics were not properly regulated, it is certain that microtubules alone could not accomplish any of these tasks. In vivo, the regulation of microtubule dynamics is the responsibility of microtubule-associated proteins. Among these, we can distinguish several classes according to their function: (1) promotion and stabilization of microtubule polymerization, (2) destabilization or severance of microtubules, (3) functioning as linkers between various structures, or (4) motility-related functions. Here we discuss how the various properties of microtubule-associated proteins can be used to assemble an efficient mitotic apparatus capable of ensuring the bona fide transmission of the genetic information in animal cells.

Centrosome Reduction During Gametogenesis and Its Significance1

Animal spermatids and primary oocytes initially have typical centrosomes comprising pairs of centrioles and pericentriolar fibrous centrosomal proteins. These somatic cell-like centrosomes are partially or completely degenerated during gametogenesis. Centrosome reduction during spermiogenesis comprises attenuation of microtubule nucleation function, loss of pericentriolar material, and centriole degeneration. Centrosome reduction during oogenesis is due to complete degeneration of centrioles, which leads to dispersal of the pericentriolar centrosomal proteins, loss of replicating capacity of the spindle poles, and switching to acentrosomal mode of spindle organization. Oocyte centrosome reduction plays an important role in preventing parthenogenetic embryogenesis and balancing centrosome number in the embryonic cells.

The mechanism of spindle assembly: functions of Ran and its target TPX2

Recent work has provided new insights into the mechanism of spindle assembly. Growing evidence supports a model in which the small GTPase Ran plays a central role in this process. Here, we examine the evidence for the existence of a RanGTP gradient around mitotic chromosomes and some controversial data on the role that chromosomes play in spindle assembly. We review the current knowledge on the Ran downstream targets for spindle assembly and we focus on the multiple roles of TPX2, one of the targets of RanGTP during cell division.

The chromosomal passenger complex is required for chromatin-induced microtubule stabilization and spindle assembly

In cells lacking centrosomes, such as those found in female meiosis, chromosomes must nucleate and stabilize microtubules in order to form a bipolar spindle. Here we report the identification of Dasra A and Dasra B, two new components of the vertebrate chromosomal passenger complex containing Incenp, Survivin, and the kinase Aurora B, and demonstrate that this complex is required for chromatin-induced microtubule stabilization and spindle formation. The failure of microtubule stabilization caused by depletion of the chromosomal passenger complex was rescued by codepletion of the microtubule-depolymerizing kinesin MCAK, whose activity is negatively regulated by Aurora B. By contrast, we present evidence that the Ran-GTP pathway of chromatin-induced microtubule nucleation does not require the chromosomal passenger complex, indicating that the mechanisms of microtubule assembly by these two pathways are distinct. We propose that the chromosomal passenger complex regulates local MCAK activity to permit spindle formation via stabilization of chromatin-associated microtubules.

Age-related trends in gene expression in the chemosensory-nasal mucosae of senescence-accelerated mice

We have utilized high-density GeneChip oligonucleotide arrays to investigate the use of the senescence-accelerated mouse (SAM) as a biogerontological resource to identify patterns of gene expression in the chemosensory-nasal mucosa. Gene profiling in chronologically young and old mice of the senescence-resistant (SAMR) and senescence-prone (SAMP) strains revealed 133 known genes that were modulated by a three-fold or greater change either in one strain or the other or in both strains during aging. We also identified known genes in our study which based on their encoded proteins were identified as aging-related genes in the aging neocortex and cerebellum of mice as reported by Lee et al. (2000) [Nat. Genet. 25 (2000) 294]. Changes in gene profiles for chemosensory-related genes including olfactory and vomeronasal receptors, sensory transduction-associated proteins, and odor and pheromone transport molecules in the young SAMR and SAMP were compared with age-matched C57BL/6J mice. An analysis of known gene expression profiles suggests that changes in the expression of immune factor genes and genes associated with cell cycle progression and cell death were particularly prominent in the old SAM strains. A preliminary cellular validation study supported the dysregulation of cell cycle-related genes in the old SAM strains. The results of our initial study indicated that the use of the SAM models of aging could provide substantive information leading to a more fundamental understanding of the aging process in the chemosensory-nasal mucosa at the genomic, molecular, and cellular levels.

Spindle assembly and cytokinesis in the absence of chromosomes during Drosophila male meiosis

A large body of work indicates that chromosomes play a key role in the assembly of both a centrosomal and centrosome-containing spindles. In animal systems, the absence of chromosomes either prevents spindle formation or allows the assembly of a metaphase-like spindle that fails to evolve into an ana-telophase spindle. Here, we show that Drosophila secondary spermatocytes can assemble morphologically normal spindles in the absence of chromosomes. The Drosophila mutants fusolo and solofuso are severely defective in chromosome segregation and produce secondary spermatocytes that are devoid of chromosomes. The centrosomes of these anucleated cells form robust asters that give rise to bipolar spindles that undergo the same ana-telophase morphological transformations that characterize normal spindles. The cells containing chromosome-free spindles are also able to assemble regular cytokinetic structures and cleave normally. In addition, chromosome-free spindles normally accumulate the Aurora B kinase at their midzones. This suggests that the association of Aurora B with chromosomes is not a prerequisite for its accumulation at the central spindle, or for its function during cytokinesis.

A perfect funeral with no corpse

"Indeed, the role in mitosis of the chromosome arms, which carry most of the genetic material, may be compared with that of a corpse at a funeral: they provide the reason for the proceedings but do not take an active part in them." (Mazia, 1961)

Minus-end capture of preformed kinetochore fibers contributes to spindle morphogenesis

Near-simultaneous three-dimensional fluorescence/differential interference contrast microscopy was used to follow the behavior of microtubules and chromosomes in living alpha-tubulin/GFP-expressing cells after inhibition of the mitotic kinesin Eg5 with monastrol. Kinetochore fibers (K-fibers) were frequently observed forming in association with chromosomes both during monastrol treatment and after monastrol removal. Surprisingly, these K-fibers were oriented away from, and not directly connected to, centrosomes and incorporated into the spindle by the sliding of their distal ends toward centrosomes via a NuMA-dependent mechanism. Similar preformed K-fibers were also observed during spindle formation in untreated cells. In addition, upon monastrol removal, centrosomes established a transient chromosome-free bipolar array whose orientation specified the axis along which chromosomes segregated. We propose that the capture and incorporation of preformed K-fibers complements the microtubule plus-end capture mechanism and contributes to spindle formation in vertebrates.

Self-organisation and forces in the microtubule cytoskeleton

Modern microscopy techniques allow us to observe specifically tagged proteins in live cells. We can now see directly that many cellular structures, for example mitotic spindles, are in fact dynamic assemblies. Their apparent stability results from out-of-equilibrium stochastic interactions at the molecular level. Recent studies have shown that the spindles can form even after centrosomes are destroyed, and that they can even form around DNA-coated beads devoid of kinetochores. Moreover, conditions have been produced in which microtubule asters interact even in the absence of chromatin. Together, these observations suggest that the spindle can be experimentally deconstructed, and that its defining characteristics can be studied in a simplified context, in the absence of the full division machinery.