Lead-Free Cs3 Bi2 Br9 Perovskite as Photocatalyst for Ring-Opening Reactions of Epoxides

A self-powered photoelectrochemical sensor based on Cs3Bi2Br9/BiOBr photocathode for acetamiprid detection in vegetables

A handily self-powered photoelectrochemical (PEC) sensor is established for acetamiprid (ACE) analysis supported by Cu3Mo2O9/Ag2S photoanode and Cs3Bi2Br9/BiOBr photocathode. The band gap structure of Cu3Mo2O9 and Ag2S is matched which enhanced the electron transfer rate. Photocathode composite is synthesized at the interface of water and oil, and the resulting composite has good stability to water and light. Electrons flowing from the photoanode through the external circuit to the photocathode can combine with photogenerated holes of Cs3Bi2Br9/BiOBr, causing the photoelectrons pass into the solution and react with oxygen, and producing a large photocathode current. With the increase of ACE concentration, the detected photocurrent gradually decreased due to the steric hindrance, and a linear relationship between photocurrent and ACE concentration in the range of 0.001-500 nM. This excellent PEC sensor also performed the great detection stability, selectivity and reproducibility, which can also be applied in practical application for pesticides analysis.

Halide Perovskite Photocatalysts for Clean Fuel Production and Organic Synthesis: Opportunities and Challenges

The need to constrain the use of fossil fuels causing global warming is motivating the development of a variety of photocatalysts for solar-to-fuel generation and chemical synthesis. In particular, semiconductor-based photocatalysts have been extensively exploited in solar-driven organic synthesis, carbon dioxide (CO2) conversion into value-added products, and hydrogen (H2) generation from water (H2O) splitting. Recently, metal halide perovskites (MHPs) have emerged as an important class of semiconductors for heterogeneous photocatalysis owing to their interesting properties. Despite key issues with long-term stability and degradation in polar solvents due to their ionic character, there has been significant progress in halide perovskite-based photocatalysts with improving their stability and performance in the gas and liquid phases. This review discusses the state-of-the-art for using halide perovskite-based photocatalysts and photoelectrocatalysis in hydrogen production from water and halogen acid solutions, CO2 reduction into value-added chemicals, and various organic chemical transformations. The different types of halide perovskites used, design strategies to overcome the instability issues in polar solvents, and the efficiencies achieved are discussed. Furthermore, the outstanding challenges associated with the use of polar electrolytes and how the stability and performance can be improved are discussed.

Modern organic transformations: heterogeneous thermocatalysis or photocatalysis?

Organic transformation driven by heterogeneous catalysis is of crucial significance in both fundamental research and modern industrial production of fine chemicals. Thermocatalysis offers excellent applications due to its high activity and excellent scalability, yet still faces significant challenges toward the goals of high efficiency, energy-saving and sustainability. Recently, photocatalysis has emerged as a promising alternative for addressing these issues in a green and economical manner. In practice, the selection of an appropriate catalytic system is a critical factor that can influence the chemical process on multiple levels significantly. In this review, we aim to present a tutorial demonstration about the critical comparison between thermo- and photocatalytic terms for organic transformation. We begin by outlining the basic principles in thermo- and photocatalytic fundamentals, together with summarizing the general advantages and disadvantages of each. Subsequently, given the high sustainability and potentiality exhibited by the photocatalytic process, we present its representative applications including oxidation, reduction, coupling, and cleavage series. The general reaction conditions and activities observed in thermocatalysis for similar reactions are also introduced for comparison. The understanding of reaction mechanisms and the resulting regulations toward activity and selectivity are specifically discussed. Finally, future perspectives of heterogeneous photocatalytic terms for practical applications are elucidated.

Insights into Lead-Free Bismuth-Based Halide Perovskites Toward Alcohol Oxidation Under Blue LED Illumination

In recent years, lead halide perovskite materials have been explored as photocatalysts for various organic transformations. However, the toxicity of "lead" has directed further research toward lead-free halide perovskites. Herein, two bismuth-based lead-free halide perovskites with the chemical compositions Cs3Bi2Br9 and Cs3Bi2Br6I3 were synthesized via a modified antisolvent-assisted precipitation method, which resulted in a hexagonal morphology of the synthesized materials. Cs3Bi2Br9 was observed to have a higher bandgap (Eg = 2.5 eV) than Cs3Bi2Br6I3 (Eg = 2.0 eV). The photocatalytic activity of both materials was studied. Both photocatalysts were employed to oxidize 1-phenylethanol to acetophenone under the irradiation of blue LEDs (light-emitting diodes, λ = 427 nm). The oxidation reaction with Cs3Bi2Br9 provided 100% conversion after 8 h of illumination. However, only 23% conversion was observed for Cs3Bi2Br6I3 even after 14 h of illumination. Cs3Bi2Br9 has a deep-lying valence band (VB) with a higher oxidation potential of the photogenerated holes and a conduction band (CB) with a higher reduction potential of photogenerated electrons than Cs3Bi2Br6I3, giving a better yield for alcohol (1-phenylethanol) oxidation. Furthermore, impedance spectroscopy and BET analysis have been studied to gain critical insights into the photocatalytic activity of the two materials.

Perovskite-Molecular Photocatalyst Synergy and Surface Engineering for Superior Photocatalytic Performance

Metal halide perovskite nanocrystals (NCs), known for their strong visible-light absorption and tunable optoelectronic properties, show significant promise for photocatalytic applications. However, their efficiency is often hindered by rapid charge recombination and insufficient exciton dissociation, limiting effective catalysis. Excited-state interactions at the NC interface are critical in determining photocatalytic performance, underscoring the need for strategies that enhance charge separation and minimize recombination. To address these challenges, we developed a composite material by combining cesium lead bromide (CsPbBr3) nanocrystals with ferrocene carboxylic acid (FcA), a hole-extracting moiety. This integration enhances exciton dissociation through energy level alignment and recombination suppression, resulting in a 3-fold increase in the photocatalytic oxidation yield of benzylamine to N-benzylidenebenzylamine (35 ± 5% versus 12 ± 2% for pristine CsPbBr3). Additionally, thionyl bromide (SOBr2) surface modification strips off ligands and introduces bromide ions onto the CsPbBr3 NCs, further improving charge transfer and substrate accessibility, resulting in a 27 ± 5% yield within 3 h. While SOBr2 treatment enhances initial catalytic performance, its acidic nature may lead to reversible reactions and side products over extended reaction times. This study highlights the impact of molecular integration and surface engineering on optimizing interfacial charge dynamics, providing a pathway toward robust, high-efficiency perovskite photocatalysts for sustainable chemical transformations.

Enhancing the Photocatalytic Performance of CsPbBr3 Nanocrystals through Ferrocene-Assisted Exciton Dissociation and Halide Vacancies

Excited-state interactions at the interfaces of nanocrystals play a crucial role in determining photocatalytic efficiency. CsPbBr3 nanocrystals (CPB NCs), celebrated for their exceptional photophysical properties, have been explored for organic photocatalysis. However, their intrinsic limitations, such as charge carrier recombination and stability issues, hinder their full potential. Strategies to enhance exciton dissociation, such as complexing CPB NCs with charge-shuttling molecules, have shown promise but remain underexplored for fully realizing their potential in improving the photocatalytic performance. We coupled ferrocene carboxylic acid (FcA) with CPB to extract the photogenerated holes, leveraging them to oxidize (1,2-dibromoethyl)benzene to phenacyl bromide. Optimization using pristine CPB NCs achieved a production rate of 5 μmol gcat-1 h-1, which increased to 13.1 μmol gcat-1 h-1 upon FcA incorporation, marking a 2.5-fold enhancement. Mechanistic investigations revealed the simultaneous involvement of electrons and holes, with oxygen acting as a reactant contributing to the oxygenated product. Halide vacancies were identified as critical adsorption sites for the substrate, with post-synthetic treatments enhancing these vacancies, resulting in over a 2-fold increase in the reaction rate. This work not only establishes an effective approach for phenacyl bromide synthesis but also highlights the potential of leveraging dissociated charge carriers to enhance photocatalysis using CPB NCs.

Defects of Metal Halide Perovskites in Photocatalytic Energy Conversion: Friend or Foe?

Photocatalytic solar-to-fuel conversion over metal halide perovskites (MHPs) has recently attracted much attention, while the roles of defects in MHPs are still under debate. Specifically, the mainstream viewpoint is that the defects are detrimental to photocatalytic performance, while some recent studies show that certain types of defects contribute to photoactivity enhancement. However, a systematic summary of why it is contradictory and how the defects in MHPs affect photocatalytic performance is still lacking. In this review, the innovative roles of defects in MHP photocatalysts are highlighted. First, the origins of defects in MHPs are elaborated, followed by clarifying certain benefits of defects in photocatalysts including optical absorption, charge dynamics, and surface reaction. Afterward, the recent progress on defect-related MHP photocatalysis, i.e., CO2 reduction, H2 generation, pollutant degradation, and organic synthesis is systematically discussed and critically appraised, putting emphasis on their beneficial effects. With defects offering peculiar sets of merits and demerits, the personal opinion on the ongoing challenges is concluded and outlining potentially promising opportunities for engineering defects on MHP photocatalysts. This critical review is anticipated to offer a better understanding of the MHP defects and spur some inspiration for designing efficient MHP photocatalysts.

Recent progress of metal halide perovskite materials in heterogeneous photocatalytic organic reactions

Photocatalytic technology is widely regarded as an important way to utilize solar energy and achieve carbon neutrality, which has attracted considerable attentions in various fields over the past decades. Metal halide perovskites (MHPs) are recognized as "superstar" materials due to their exceptional photoelectric properties, readily accessible and tunable structure, which made them intensively studied in solar cells, light-emitting diodes, and solar energy conversion fields. Since 2018, increased attention has been focused on applying the MHPs as a heterogeneous visible light photocatalyst in catalyzing organic synthesis reactions. In this review, we present an overview of photocatalytic technology and principles of heterogeneous photocatalysis before delving into the structural characteristics, stability, and classifications of MHPs. We then focus on recent developments of MHPs in photocatalyzing various organic synthesis reactions, such as oxidation, cyclization, C-C coupling etc., based on their classifications and reported reaction types. Finally, we discuss the main limitations and prospects regarding the application of metal halide perovskites in organic synthesis.

Solar-Light-Driven Photocatalytic Oxidative Coupling of Phenol Derivatives over Bismuth-Based Porous Metal Halide Perovskites

The selective oxidative coupling of phenol derivatives, involving carbon-carbon (C-C) and carbon-oxygen (C-O) bond formation, has emerged as a critical approach in the synthesis of natural products. However, achieving precise control over the selectivity in coupling reactions of unsubstituted phenols utilizing solar light as the driving force remains a big challenge. In this study, we report a series of porous Cs3Bi2X9 (X=Cl, Br, I) photocatalysts with tailored band gaps and compositions engineered for efficient solar-light-driven oxidative phenol coupling. Notably, p-Cs3Bi2Br9 exhibited about 73 % selectivity for C-C coupling, displaying a high formation rate of 47.3 μmol gcat -1 h-1 under solar radiation. Furthermore, this approach enables control of the site-selectivity for phenol derivatives on Cs3Bi2X9, enhancing C-C coupling. The distinctive porous structure and appropriate band-edge positions of Cs3Bi2Br9 facilitated efficient charge separation, and surface interaction/activation of phenolic hydroxyl groups, resulting in the kinetically preferred formation of C-C over C-O bond. Mechanistic insights into the reaction pathway, supported by comprehensive control experiments, unveiled the crucial role of interfacial charge transfers and Lewis acid Bi sites in stabilizing phenolic intermediates, thereby directing the regioselectivity of diradical couplings and resulting in the formation of unsymmetrical biphenols.

Structural Modification Strategies, Interfacial Charge-Carrier Dynamics, and Solar Energy Conversion Applications of Organic-Inorganic Halide Perovskite Photocatalysts

Over the past few decades, organic-inorganic halide perovskites (OIHPs) as novel photocatalyst materials have attracted intensive attention for an impressive variety of photocatalytic applications due to their excellent photophysical (chemical) properties. Regarding practical application and future commercialization, the air-water stability and photocatalytic performance of OIHPs need to be further improved. Accordingly, studying modification strategies and interfacial interaction mechanisms is crucial. In this review, the current progress in the development and photocatalytic fundamentals of OIHPs is summarized. Furthermore, the structural modification strategies of OIHPs, including dimensionality control, heterojunction design, encapsulation techniques, and so on for the enhancement of charge-carrier transfer and the enlargement of long-term stability, are elucidated. Subsequently, the interfacial mechanisms and charge-carrier dynamics of OIHPs during the photocatalytic process are systematically specified and classified via diverse photophysical and electrochemical characterization methods, such as time-resolved photoluminescence measurements, ultrafast transient absorption spectroscopy, electrochemical impedance spectroscopy measurements, transient photocurrent densities, and so forth. Eventually, various photocatalytic applications of OIHPs, including hydrogen evolution, CO2 reduction, pollutant degradation, and photocatalytic conversion of organic matter.

Seeking environmentally friendly halide perovskite photocatalysts: synthesis, structure and photocatalytic performance exploration

Halide perovskites have high photoelectric conversion efficiency, making them promising candidates for photocatalysis. However, their toxic and unstable nature limits their applications. Here, we successfully synthesised three hybrid Bi-based halide perovskites: (HTMG)3Bi2Br9 (1), (HEI)2BiBr5 (2) and (HTMA)3Bi2Br9 (3). X-ray single-crystal diffraction analysis shows that they all contained 0D structures composed of isolated Bi-Br clusters. The three compounds showed excellent degradability and cycling stability for Sudan III dissolved in ethanol under simulated sunlight. In addition, the photocatalytic degradation performance of four Bi-based halide perovskites previously reported by our group is also characterised and summarised in this work.

Photocatalysis Based on Metal Halide Perovskites for Organic Chemical Transformations

Heterogeneous photocatalysts incorporating metal halide perovskites (MHPs) have garnered significant attention due to their remarkable attributes: strong visible-light absorption, tuneable band energy levels, rapid charge transfer, and defect tolerance. Additionally, the promising optical and electronic properties of MHP nanocrystals can be harnessed for photocatalytic applications through controlled crystal structure engineering, involving composition tuning via metal ion and halide ion variations, dimensional tuning, and surface chemistry modifications. Combination of perovskites with other materials can improve the photoinduced charge separation and charge transfer, building heterostructures with different band alignments, such as type-II, Z-scheme, and Schottky heterojunctions, which can fine-tune redox potentials of the perovskite for photocatalytic organic reactions. This review delves into the activation of organic molecules through charge and energy transfer mechanisms. The review further investigates the impact of crystal engineering on photocatalytic activity, spanning a diverse array of organic transformations, such as C-X bond formation (X = C, N, and O), [2 + 2] and [4 + 2] cycloadditions, substrate isomerization, and asymmetric catalysis. This study provides insights to propel the advancement of metal halide perovskite-based photocatalysts, thereby fostering innovation in organic chemical transformations.

Synthesis of Layered Lead-Free Perovskite Nanocrystals with Precise Size and Shape Control and Their Photocatalytic Activity

Halide perovskites have attracted enormous attention due to their potential applications in optoelectronics and photocatalysis. However, concerns over their instability, toxicity, and unsatisfactory efficiency have necessitated the development of lead-free all-inorganic halide perovskites. A major challenge in designing efficient halide perovskites for practical applications is the lack of effective methods for producing nanocrystals with precise size and shape control. In this work, a layered perovskite, Cs4ZnSb2Cl12 (CZS), is found from calculations to exhibit size- and facet-dependent optoelectronic properties in the nanoscale, and thus, a colloidal method is used to synthesize the CZS nanoparticles with size-tunable morphologies: zero- (nanodots), one- (nanowires and nanorods), two- (nanoplates), and three-dimensional (nanopolyhedra). The growth kinetics of the CZS nanostructures, along with the effects of surface ligands, reaction temperature, and time were investigated. The optoelectronic properties of the nanocrystals varied with size due to quantum confinement effects and with shape due to anisotropy within the crystals and the exposure of specific facets. These properties could be modulated to enhance the visible-light photocatalytic performance for toluene oxidation. In particular, the 9.7 nm CZS nanoplates displayed a toluene to benzaldehyde conversion rate of 1893 μmol g-1 h-1 (95% selectivity), 500 times higher than the bulk synthesized CZS, and comparable with the reported photocatalysts. This study demonstrates the integration of theoretical calculations and synthesis, revealing an approach to the design and fabrication of novel, high-performance colloidal perovskite nanocrystals for optoelectronic and photocatalytic applications.

Preferential perovskite surface-termination induced high piezoresponse in lead-free in situ fabricated Cs3Bi2Br9-PVDF nanocomposites promotes biomechanical energy harvesting

Lead-free halide perovskites have gained immense popularity in photovoltaic and energy harvesting applications because of their excellent optical and electrical attributes with minimal toxicity. We synthesized composite films of lead-free Cs₃Bi₂Br₉ perovskite embedded in the polyvinylidene fluoride (PVDF) matrix and have investigated their piezoelectric energy harvesting. Five PVDF@Cs₃Bi₂Br₉ composite films were fabricated with varying wt% of the perovskite in the PVDF. The composite with a 4 wt% of the perovskite shows 85% activation of the electroactive β-phase of PVDF. Additionally, this composite exhibits a maximum polarisation of ∼0.1 μC cm^-2 and the best energy storage density of ∼0.8 mJ cm^-3 at an applied field of ∼16 kV cm^-1 among all the synthesized composites. A nanogenerator fabricated using 4 wt% loading in the composite film produced an instantaneous output voltage of ∼40 V, an instantaneous current of ∼4.1 μA, and a power density of ∼17.8 μW cm^-2 across 10 MΩ resistance when repeatedly hammered by the human hand. The nanogenerator is further employed to light up several LEDs and to charge capacitors with a small active area demonstrating significant promise for prospective wearables and portable devices and paving the way for high-performance nanogenerators using lead-free halide perovskites. Density functional theory calculations were performed to understand the interaction of the electroactive phase of the PVDF with different perovskite surface terminations to unravel the various interaction mechanisms and their ensuing charge transfer properties.

The Dark Side of Lead-Free Metal Halide Nanocrystals: Substituent-Modulated Photocatalytic Activity in Benzyl Bromide Reduction

We illustrate here the high photocatalytic activity of sustainable lead-free metal halide nanocrystals (NCs), namely, Cs₃Sb₂Br₉ NCs, in the reduction of p-substituted benzyl bromides in the absence of a cocatalyst. The electronic properties of the benzyl bromide substituents and the substrate affinity to the NC surface determine the selectivity in C-C homocoupling under visible light irradiation. This photocatalyst can be reused for at least three cycles and preserves its good performance with a turnover number of ca. 105,000.

Recent developments in lead-free bismuth-based halide perovskite nanomaterials for heterogeneous photocatalysis under visible light

Halide perovskite materials, especially lead-based perovskites, have been widely used for optoelectronic and catalytic applications. However, the high toxicity of the lead element is a major concern that directs the research work toward lead-free halide perovskites, which could utilize bismuth as a promising candidate. Until now, the replacement of lead by bismuth in perovskites has been well studied by designing bismuth-based halide perovskite (BHP) nanomaterials with versatile physical-chemical properties, which are emerging in various application fields, especially heterogeneous photocatalysis. In this mini-review, we present a brief overview of recent progress in BHP nanomaterials for photocatalysis under visible light. The synthesis and physical-chemical properties of BHP nanomaterials have been comprehensively summarized, including zero-dimensional, two-dimensional nanostructures and hetero-architectures. Later, we introduce the photocatalytic applications of these novel BHP nanomaterials with visible-light response, improved charge separation/transport and unique catalytic sites. Due to advanced nano-morphologies, a well-designed electronic structure and an engineered surface chemical micro-environment, BHP nanomaterials demonstrate enhanced photocatalytic performance for hydrogen generation, CO₂ reduction, organic synthesis and pollutant removal. Finally, the challenges and future research directions of BHP nanomaterials for photocatalysis are discussed.

Stabilization and Performance Enhancement Strategies for Halide Perovskite Photocatalysts

Solar-energy-powered photocatalytic fuel production and chemical synthesis are widely recognized as viable technological solutions for a sustainable energy future. However, the requirement of high-performance photocatalysts is a major bottleneck. Halide perovskites, a category of diversified semiconductor materials with suitable energy-band-enabled high-light-utilization efficiencies, exceptionally long charge-carrier-diffusion-length-facilitated charge transport, and readily tailorable compositional, structural, and morphological properties, have emerged as a new class of photocatalysts for efficient hydrogen evolution, CO₂ reduction, and various organic synthesis reactions. Despite the noticeable progress, the development of high-performance halide perovskite photocatalysts (HPPs) is still hindered by several key challenges: the strong ionic nature and high hydrolysis tendency induce instability and an unsatisfactory activity due to the need for a coactive component to realize redox processes. Herein, the recently developed advanced strategies to enhance the stability and photocatalytic activity of HPPs are comprehensively reviewed. The widely applicable stability enhancement strategies are first articulated, and the activity improvement strategies for fuel production and chemical synthesis are then explored. Finally, the challenges and future perspectives associated with the application of HPPs in efficient production of fuels and value-added chemicals are presented, indicating the irreplaceable role of the HPPs in the field of photocatalysis.

Air- and water-stable and photocatalytically active germanium-based 2D perovskites by organic spacer engineering

There is increasing interest in the role of metal halide perovskites for heterogeneous catalysis. Here, we report a Ge-based 2D perovskite material that shows intrinsic water stability realized through organic cation engineering. Incorporating 4-phenylbenzilammonium (PhBz) we demonstrate, by means of extended experimental and computational results, that PhBz₂GeBr₄ and PhBz₂GeI₄ can achieve relevant air and water stability. The creation of composites embedding graphitic carbon nitride (g-C₃N₄) allows a proof of concept for light-induced hydrogen evolution in an aqueous environment by 2D Ge-based perovskites thanks to the effective charge transfer at the heterojunction between the two semiconductors.

Bismuth-Based Halide Perovskites for Photocatalytic H2 Evolution Application

Metal halide perovskites (MHPs), in particular lead-based perovskites, have earned recognized fame in several fields for their outstanding optoelectronic properties, including direct generation of free charge carriers, optimal ambipolar charge carrier transport properties, high absorption coefficient, point-defect tolerance, and compositional versatility. Nowadays, this class of materials represents a real and promising alternative to silicon for photovoltaic technologies. This worthy success led to a growing interest in the exploration of MHPs in other hot research fields, such as solar-driven photocatalytic water splitting towards hydrogen production. Nevertheless, many of these perovskites show air and moisture instability problems that considerably hinder their practical application for photocatalytic water splitting. Moreover, if chemical instability is a problem that can be in part mitigated by the optimization of the chemical composition and crystal structure, the presence of lead represents a real problem for the practical application of MHPs in commercial devices due to environmental and healthcare issues. To successfully overcome these problems, lead-free metal halide perovskites (LFMHPs) have gained increasing interest thanks to their optoelectronic properties, comparable to lead-based materials, and their more eco-friendly nature. Among all the lead-free perovskite alternatives, this mini-review considers bismuth-based perovskites and perovskite derivatives with a specific focus on solar-driven photocatalysis application for H₂ evolution. Special attention is dedicated to the structure and composition of the different materials and to the advantage of heterojunction engineering and the relative impact on the photocatalytic process.

Promoted photocarrier separation by dipole engineering in two-dimensional perovskite/C2N van der Waals heterostructures

Due to the aggravation of environmental pollution and the energy crisis, it is urgent to develop and design environment-friendly and efficient photocatalysts for water splitting. van der Waals heterostructures composed of different two-dimensional materials offer an easily accessible way to combine properties of individual materials for applications. Herein, a novel Cs₃Bi₂I₉/C₂N heterostructure is proposed through first-principles calculations. The structural, electronic, and optical properties, as well as the charge transfer mechanism at the interface of Cs₃Bi₂I₉/C₂N are systematically investigated. Due to the difference between the work functions of Cs₃Bi₂I₉ and C₂N monolayers, when they are constructed into heterostructures, redistribution of charge occurs in the whole structure, and some of the charge transfer occurs at the interface due to the formation of an internal electric field. The band structure of Cs₃Bi₂I₉/C₂N has type-II band alignment, and the band edge position as well as the band-gap value of the heterostructure are suitable for visible light water splitting. The in-plane biaxial strain, interfacial spacing, and external electric field can effectively modulate the electronic structure and photocatalytic performance of the heterostructure. Under certain conditions, the heterostructure can be changed from type-II to type-I band alignment, accompanied by the transition from an indirect band-gap semiconductor to a direct band-gap semiconductor. Moreover, the intrinsic anion defect (I vacancy) at different positions, as donor defects, can introduce defect levels near the conduction band edge, which affects the transition of photogenerated carriers in these systems. Our findings provide a theoretical design for strategies to improve the performance of two-dimensional perovskites/C₂N in photocatalytic and optoelectronic applications.

Halide Double-Perovskite Semiconductors beyond Photovoltaics

Halide double perovskites, A₂M^IM^IIIX₆, offer a vast chemical space for obtaining unexplored materials with exciting properties for a wide range of applications. The photovoltaic performance of halide double perovskites has been limited due to the large and/or indirect bandgap of the presently known materials. However, their applications extend beyond outdoor photovoltaics, as halide double perovskites exhibit properties suitable for memory devices, indoor photovoltaics, X-ray detectors, light-emitting diodes, temperature and humidity sensors, photocatalysts, and many more. This Perspective highlights challenges associated with the synthesis and characterization of halide double perovskites and offers an outlook on the potential use of some of the properties exhibited by this so far underexplored class of materials.

Triplet Energy Transfer from Lead Halide Perovskite for Highly Selective Photocatalytic 2 + 2 Cycloaddition

Triplet excitons are generally confined within a semiconductor. Hence, solar energy utilization via direct triplet energy transfer (TET) from semiconductors is challenging. TET from lead halide perovskite semiconductors to nearby organic molecules has been illustrated with ultrafast spectroscopy. Direct utilization of solar energy, i.e., visible light, via TET for photocatalysis is an important route but has not yet been demonstrated with lead halide perovskite semiconductors. Here, we show that a photocatalytic reaction, focusing on a 2 + 2 cycloaddition reaction, can been successfully demonstrated via TET from lead halide perovskite nanocrystals (PNCs). The triplet excitons are shown to induce a highly diastereomeric syn-selective 2 + 2 cycloaddition starting from olefins. Such photocatalytic reactions probe the TET process previously only observed spectroscopically. Moreover, our observation demonstrates that bulk-like PNCs (size, >10 nm; PL = 530 nm), in addition to quantum-confined smaller PNCs, are also effective for TET. Our findings may render a new energy conversion pathway to employ PNCs via direct TET for photocatalytic organic synthesis.

Structural distortion induced broad emission in vacancy-ordered halide triple perovskites

The structural distortion in halide perovskites is important to tune the optical properties of materials. The octahedra formed by metal cation and halide anions in these classes of materials remain...

Developing sustainable, high-performance perovskites in photocatalysis: design strategies and applications

Solar energy is attractive because it is free, renewable, abundant and sustainable. Photocatalysis is one of the feasible routes to utilize solar energy for the degradation of pollutants and the production of fuel. Perovskites and their derivatives have received substantial attention in both photocatalytic wastewater treatment and energy production because of their highly tailorable structural and physicochemical properties. This review illustrates the basic principles of photocatalytic reactions and the application of these principles to the design of robust and sustainable perovskite photocatalysts. It details the structures of the perovskites and the physics and chemistry behind photocatalytic reactions and describes the advantages and limitations of popular strategies for the design of photoactive perovskites. This is followed by examples of how these strategies are applied to enhance the photocatalytic efficiency of oxide, halide and oxyhalide perovskites, with a focus on materials with potential for practical application, that is, not containing scarce or toxic elements. It is expected that this overview of the development of photocatalysts and deeper understanding of photocatalytic principles will accelerate the exploitation of efficient perovskite photocatalysts and bring about effective solutions to the energy and environmental crisis.

Optical and Structural Property Tuning in Physical Vapor Deposited Bismuth Halides Cs3Bi2(I1-xBrx)9 (0 ≤ x ≤ 1)

Crystalline films of lead-free all-inorganic Cs3Bi2X9 (X = Br, I) perovskites have been deposited by radio frequency (RF)-magnetron sputtering providing high-quality, single-phase films as confirmed by structural, morphological, and optical property characterization. Progressive tuning of crystal structure characteristics and optical absorbance has been achieved in mixed Br/I phases Cs3Bi2(I1-xBrx)9 (0 ≤ x ≤ 1), highlighting a shift of the band gap from about 2.0 eV for Cs3Bi2I9 to 2.64 eV for Cs3Bi2Br9. X-ray diffraction and Raman scattering allowed defining the range of alloyed compositions where single-phase compositions are found. Finally, preliminary photocatalytic activity tests on the degradation of methylene blue provided solid data indicating the future possible exploitation of Bi-based perovskite derivative materials as active photocatalysts.

Application of Metal Halide Perovskites as Photocatalysts in Organic Reactions

This review summarizes the current status of the application of metal halide perovskites (MHPs) as photocatalysts in organic syntheses/transformations. It is shown that the optimal and unique electronic properties of MHPs can be advantageously used in several reaction types providing pros with respect to traditional photocatalysts. While still being at infancy, such field of application of MHPs as effective photocatalysts will for sure become a central research topic in the forthcoming years, thanks also to their rich structural and chemical tunability, which may provide tailored materials for most of the envisaged organic reactions.

How to apply metal halide perovskites to photocatalysis: challenges and development

Semiconductor photocatalysts are widely used in environmental remediation and energy conversion processes that affect social development. These processes involve, for example, hydrogen production from water splitting, carbon dioxide reduction, pollutant degradation, and the conversion of raw organic chemical materials into high-value-added chemicals. Metal halide perovskites (MHPs) have become a new class of promising cheap and easy to manufacture candidate materials for use in photocatalytic semiconductors due to their advantages of high extinction coefficients, optimal band gaps, high photoluminescence quantum yields, and long electron-hole diffusion lengths. However, their unstable ion-bonded crystal structures (very low theoretical decomposition energy barriers) limit their widespread application. In this review, we introduce the physical properties of MHP materials suitable for photocatalysis, and MHP-based photocatalytic particle suspension systems, photoelectrode thin film systems, and photovoltaic-photo(electro)chemical systems. Then, numerous studies realizing efficient and stable photocatalytic water splitting, carbon dioxide reduction, organic conversion, and other reactions involving MHP materials were highlighted. In addition, we conducted rigorous analysis of the potential problems that could hinder progress in this new scientific research field, such as Pb element toxicity and material instability. Finally, we outline the potential opportunities and directions for photocatalysis research based on MHPs.

Boosting Photocatalytic Activity and Stability of Lead-Free Cs3Bi2Br9 Perovskite Nanocrystals via In Situ Growth on Monolayer 2D Ti3C2Tx MXene for C-H Bond Oxidation

Light-driven selective oxidation of saturated C-H bonds with molecular oxygen, as an alternative to conventional thermochemical catalysis, allows a sustainable and eco-friendly manner to convert solar energy into highly value-added oxygenates. However, the photocatalytic oxidation of hydrocarbons still remains a great challenge owing to the low efficiency in the separation and transfer of photogenerated charge of the currently available photocatalytic materials. Herein, we report a novel perovskite-based heterostructure photocatalyst, in which ligand- and lead-free all-inorganic perovskite Cs₃Bi₂Br₉ nanocrystals (NCs) with uniform crystal size and high crystallinity were homogeneously distributed on the surface of ultrathin two-dimensional (2D) monolayer Ti₃C₂T_x MXene nanosheets in an in situ growth manner. The resultant heterostructure featured with intimate interface between Cs₃Bi₂Br₉ NCs and Ti₃C₂T_x MXene and strong visible-light adsorption not only exhibits significant enhancement in the performance of photocatalytic oxidation of challenging aromatic and aliphatic alkanes under visible-light irradiation but also greatly improves the stability of Cs₃Bi₂Br₉ NCs under a reaction environment. Comprehensive characterizations reveal that the formation of an intimate interface between Cs₃Bi₂Br₉ NCs and highly conductive ultrathin 2D Ti₃C₂T_x MXene nanosheets via strong interaction markedly accelerates the separation and transfer efficiency of photogenerated electron-hole pairs and simultaneously suppresses their recombination, resulting in improved utilization of the excited charges, which account for the highly enhanced photocatalytic performance.

Recent Progress in Designing Halide-Perovskite-Based System for the Photocatalytic Applications

The halide perovskite material has attracted vast attention as a versatile semiconductor in the past decade. With the unique advantages in physical and chemical properties, they have also shown great potential in photocatalytic applications. This review aims at the specific design principles triggered by the unique properties when employing halide-perovskite-based photocatalytic systems from the following perspectives: (I) Design of photoelectrocatalytic device structures including the n-i-p/p-i-n structure, photoelectrode device encapsulation, and electrolyte engineering. (II) The design of heterogeneous photocatalytic systems toward the hydrogen evolution reaction (HER) and CO2 reduction reaction, including the light management, surface/interface engineering, stability improvement, product selectivity engineering, and reaction system engineering. (III) The photocatalysts for the environmental application and organic synthesis. Based on the analyses, the review also suggests the prospective research for the future development of halide-perovskite-based photocatalytic systems.

Photoredox Organic Synthesis Employing Heterogeneous Photocatalysts with Emphasis on Halide Perovskite

Lately, heterogeneous semiconductor materials have been explored as an emerging type of efficient photocatalyst for photoredox organic synthesis. Among these semiconductors, lead halide perovskite materials demonstrate unique properties towards excellent charge separation and charge transfer, extremely long charge carrier migration, high efficiency in visible light absorption, and long excited states lifetimes, etc., as proved in ground-breaking solar cell applications, garnering necessary merits for an efficient catalytic system for photoredox organic reactions. Here, the latest progress in heterogeneous semiconductor materials towards this endeavor is examined, with particular emphasis on lead halide perovskite nanocrystals (NCs) in photocatalytic organic synthesis.

Revealing the A-Site Effect of Lead-Free A3 Sb2 Br9 Perovskite in Photocatalytic C(sp3 )-H Bond Activation

The lead-free halide perovskite A₃ Sb₂ Br₉ is utilized as a photocatalyst for the first time for C(sp³ )-H bond activation. A₃ Sb₂ Br₉ nanoparticles (A₃ Sb₂ Br₉ NPs) with different ratios of Cs and CH₃ NH₃ (MA) show different photocatalytic activities for toluene oxidation and the photocatalytic performance is enhanced when increasing the amount of Cs. The octahedron distortion caused by A-site cations can change the electronic properties of X-site ions and further affect the electron transfer from toluene molecules to Br sites. After the regulation of A-site cations, the photocatalytic activity is higher with A₃ Sb₂ Br₉ NPs than that with classic photocatalysts (TiO₂ , WO₃ , and CdS). The main active species involved in photocatalytic oxidation of toluene are photogenerated holes (h⁺ ) and superoxide anions (^. O₂ ^- ). The octahedron distortion by A-site cations affecting photocatalytic activity remains unique and is also a step forward for understanding more about halide-perovskite-based photocatalysis. The relationship between octahedron distortion and photocatalysis can also guide the design of new photocatalytic systems involving other halide perovskites.

Understanding the Effect of Crystalline Structural Transformation for Lead-Free Inorganic Halide Perovskites

Lead-free inorganic halide perovskites have triggered appealing interests in various energy-related applications including solar cells and photocatalysis. However, why perovskite-structured materials exhibit excellent photoelectric properties and how the unique crystalline structures affect the charge behaviors are still not well elucidated but essentially desired. Herein, taking inorganic halide perovskite Cs₃ Bi₂ Br₉ as a prototype, the significant derivation process of silver atoms incorporation to induce the structural transformation from Cs₃ Bi₂ Br₉ to Cs₂ AgBiBr₆ , which brings about dramatic differences in photoelectric properties is unraveled. It is demonstrated that the silver incorporation results in the co-operated orbitals hybridization, which makes the electronic distributions in conduction and valence bands of Cs₂ AgBiBr₆ more dispersible, eliminating the strong localization of electron-hole pairs. As consequences of the electronic structures derivation, exhilarating changes in photoelectric properties like band structure, exciton binding energy, and charge carrier dynamics are verified experimentally and theoretically. Using photocatalytic hydrogen evolution activity under visible light as a typical evaluation, such crystalline structure transformation contributes to a more than 100-fold enhancement in photocatalytic performances compared with pristine Cs₃ Bi₂ Br₉ , verifying the significant effect of structural derivations on the exhibited performances. The findings will provide evidences for understanding the origin of photoelectric properties for perovskites semiconductors in solar energy conversion.

Recent Progresses on Metal Halide Perovskite-Based Material as Potential Photocatalyst

Recent years have witnessed an incredibly high interest in perovskite-based materials. Among this class, metal halide perovskites (MHPs) have attracted a lot of attention due to their easy preparation and excellent opto-electronic properties, showing a remarkably fast development in a few decades, particularly in solar light-driven applications. The high extinction coefficients, the optimal band gaps, the high photoluminescence quantum yields and the long electron–hole diffusion lengths make MHPs promising candidates in several technologies. Currently, the researchers have been focusing their attention on MHPs-based solar cells, light-emitting diodes, photodetectors, lasers, X-ray detectors and luminescent solar concentrators. In our review, we firstly present a brief introduction on the recent discoveries and on the remarkable properties of metal halide perovskites, followed by a summary of some of their more traditional and representative applications. In particular, the core of this work was to examine the recent progresses of MHPs-based materials in photocatalytic applications. We summarize some recent developments of hybrid organic–inorganic and all-inorganic MHPs, recently used as photocatalysts for hydrogen evolution, carbon dioxide reduction, organic contaminant degradation and organic synthesis. Finally, the main limitations and the future potential of this new generation of materials have been discussed.

A Supported Bismuth Halide Perovskite Photocatalyst for Selective Aliphatic and Aromatic C-H Bond Activation

Direct selective oxidation of hydrocarbons to oxygenates by O2 is challenging. Catalysts are limited by the low activity and narrow application scope, and the main focus is on active C-H bonds at benzylic positions. In this work, stable, lead-free, Cs3 Bi2 Br9 halide perovskites are integrated within the pore channels of mesoporous SBA-15 silica and demonstrate their photocatalytic potentials for C-H bond activation. The composite photocatalysts can effectively oxidize hydrocarbons (C5 to C16 including aromatic and aliphatic alkanes) with a conversion rate up to 32900 μmol gcat -1  h-1 and excellent selectivity (>99 %) towards aldehydes and ketones under visible-light irradiation. Isotopic labeling, in situ spectroscopic studies, and DFT calculations reveal that well-dispersed small perovskite nanoparticles (2-5 nm) possess enhanced electron-hole separation and a close contact with hydrocarbons that facilitates C(sp3 )-H bond activation by photoinduced charges.

Charge-Carrier Dynamics of Lead-Free Halide Perovskite Nanocrystals

Lead halide perovskite nanocrystals (NCs) have been widely studied for application in optoelectronic devices due to their excellent optical properties and low-cost synthesis. However, the toxicity of lead and the poor stability of the NCs hindered their practical applications. Sn²⁺-based perovskite with low toxicity was first developed; however, the Sn²⁺-based perovskite NCs are unstable in air and oxidize easily. Recently, air-stable lead-free perovskite NCs have been developed and received increasing attention. Unfortunately, the optical and optoelectronic properties of these lead-free halide perovskite NCs are generally far worse than those of lead-perovskite NCs. Understanding the charge-carrier dynamics of semiconductors is crucial to improve their optical properties. In this Account, we mainly review our recent research progress on the study of charge-carrier dynamics in air-stable lead-free perovskite NCs. The exciton trapping followed by nonradiative recombination was the major carrier relaxation pathway and resulted in a low photoluminescence quantum efficiency (PLQE). A feasible route for passivating surface traps and tuning the self-trapped excitons from "dark" (nonradiative) to "bright" (radiative) was proposed. Through this strategy, the PLQE could be increased over 100-fold. In addition, we have compared several photophysical properties of lead-free perovskite NCs with that of lead perovskite NCs, such as charge-carrier relaxation, exciton-phonon coupling, and hot-carrier cooling. In 2017, we reported the synthesis, optical properties, and charge-carrier dynamics of Cs₃Bi₂X₉ (X: Cl, Br, I) NCs. The Cs₃Bi₂Br₉ NCs exhibited clear exciton trapping processes with time scales in the range of 2-20 ps. The fast trapping processes could be passivated via the use of surfactants (such as oleic acid), and the PLQE increased over 20-fold (from 0.2% to 4.5%). The low PLQE may be due to the reduced dimensionality of Cs₃Bi₂Br₉ (2D) compared with the 3D cubic perovskite structure of CsPbBr₃. We next reported double perovskite Cs₂AgSb_1-yBi_yX₆ (X: Br, Cl; 0 ≤ y ≤ 1) NCs, which exhibited a similar 3D cubic perovskite structure to that of the lead-perovskite NCs. The charge-carrier dynamics indicated that the sub-band-gap exciton trapping processes were dominated by ultrafast (∼1-2 ps) intrinsic self-trapping and trapping at surface defects (∼50-100 ps). While trapping at surface defects can be passivated using surfactants, the self-trapping processes is due to the giant carrier-phonon coupling effect. By designing direct band gap double perovskite NCs to tune the sub-band-gap trapping processes, bright dual-color emission was achieved. Furthermore, the violet PLQE could be improved to 36.6%, which is comparable to that in lead halide perovskite NCs. We hope this Account will deepen the understanding of the charge-carrier dynamics in lead-free perovskite NCs and guide the design of high-performance lead-free perovskites.