The Future of Carbon Dioxide Chemistry

CO2-Sourced Polymer Dyes for Dual Information Encryption

Large amounts of small molecule dyes leak into the ecosystems annually in harmful and unsustainable ways. Polymer dyes have attracted much attention because of their high migration resistance, excellent stability, and minimized leakage. However, the complex synthesis process, high cost, and poor degradability hinder their widespread application. Herein, green and sustainable polymer dyes are prepared using natural dye quercetin (Qc) and CO2 through a one-step process. The CO2-sourced polymer dyes show strong migration resistance, high stability, and can be degraded on demand. Additionally, the CO2-sourced polymer dyes showed unique responses to Zn2+, leading to significantly enhanced fluorescence, highlighting their potential for information encryption/decryption. The CO2-sourced polymer dyes can solve the environmental hazards caused by small molecule dye leakage and promote the carbon cycle process. Meanwhile, the one-step synthesis process is expected to achieve sustainable and widespread utilization of CO2-sourced polymer dyes.

Intramolecular Charge Transfer Inhibition Strategy toward a Desired Solvatochromic Fluorescent Platform: Visualization of Duple Organelles and Detection of Carbon Dioxide

Solvatochromic fluorescent probes are crucial molecular tools to investigate and aggregate proteins' fold, visualize fine structures in biomembranes, and label different organelles in dual emission colors. However, solvatochromic fluorogens often displayed a weak emission at high polarity, hindering their bioimaging applications. To resolve this problem, herein, we propose an intramolecular charge transfer (ICT) inhibition strategy. The probe was designed with a single electronic donor and two acceptors in order to split and inhibit the ICT procedure. As a result, the probe displayed an intense emission at both low and high polarities and showed a large emission shift (84 nm) upon polarity change. Using the probe, we successfully imaged lipid droplets and the endoplasmic reticulum in different fluorescence colors. Moreover, the different degrees of lipid accumulation by oleic acid, stearic acid, and cholesterol (oleic acid > stearic acid > cholesterol) have been revealed. The lipid accumulation induced by the three lipids could be rapidly consumed under lipid-less conditions, and the lipids with stearic acid were the most difficult to be consumed. The biological results could facilitate the understanding and treatment of lipid accumulation and obesity. Furthermore, utilizing the polarity increase of diethylamine after the reaction with CO2, the ratiometric detection of CO2 has been achieved for the first time with the probe.

Fluorescent Carbon Dioxide-Based Polycarbonates Probe for Rapid Detection of Aniline in the Environment and Its Biomarkers in Urine

Aniline compounds, as a class of widely used but highly toxic chemical raw materials, are increasingly being released and accumulated in the environment, posing serious threats to environmental safety and human health. Therefore, developing detection methods for aniline compounds is of particular significance. Herein, we synthesized the fluorescent third monomer cyano-stilbene epoxide M and ternary copolymerized it with carbon dioxide (CO2) and propylene oxide (PO) to synthesize carbon dioxide-based polycarbonate (PPCM) with fluorescence recognition functions, as well as excellent performance, for the first time. The results revealed that the PPCM fluorescent probe exhibited typical aggregation-induced luminescence properties and could be quenched by aniline compounds. The probe presented anti-interference-specific selectivity for aniline compounds, and the detection limit was 1.69 × 10-4 M. Moreover, it was found to be a highly sensitive aniline detection probe. At the same time, the aniline biomarker p-aminophenol in urine could also be detected, which could expand the potential applications of polymers in the fluorescence-sensing field.

Two in one: aluminum porphyrin-based porous organic polymers containing symmetrical quaternary phosphonium salts for catalytic conversion of CO2 into cyclic carbonates

Based on the double activation models of epoxides, the design and synthesis of ionic porous organic polymers (iPOPs) is considered to be very attractive and promising but has remained a great challenge in recent decades owing to electrostatic interactions between charged groups. In this contribution, we developed a two-in-one strategy to fabricate metalloporphyrin-based iPOPs with unique nanostructures (named AlPor-QP@POP), which are composed of aluminum porphyrin units and three-dimensional quaternary phosphonium salts that work synergistically in the cycloaddition of CO2 with epoxides under mild conditions. The high symmetry of two monomers allows them to possess similar reactivity ratios and thus endows AlPor-QP@POP with densely located active sites, a large surface area and good CO2 capture capacity. More importantly, bifunctional AlPor-QP@POP has enormous potential to produce cyclic carbonates with simulated flue gas under ambient conditions. Moreover, AlPor-QP@POP can be readily recycled and efficiently reused more than ten times without an obvious decrease in catalytic activity. Finally, kinetic investigations and a comparative study have been conducted to understand the possible mechanism of CO2 catalytic cycloaddition.

In Situ Anchoring of Small-Sized Silver Nanoparticles on Porphyrinic Triazine-Based Frameworks for the Conversion of CO2 into α-Alkylidene Cyclic Carbonates with Outstanding Catalytic Activities under Ambient Conditions

The preparation of catalytic hybrid materials by introducing highly dispersed metallic nanoparticles into porous organic polymers (POPs) may be an ideal and promising strategy for integrated CO2 capture and conversion. In terms of the carboxylative cyclization of propargyl alcohols with CO2, the anchoring of silver nanoparticles (AgNPs) on functional POPs to fabricate efficient heterogeneous catalysts is considered to be quite intriguing but remains challenging. In the contribution, well-dispersed AgNPs were successfully anchored onto the porphyrinic triazine-based frameworks by a simple "liquid impregnation and in situ reduction" strategy. The presence of N-rich dual active sites, porphyrin and triazine, which acted as the electron donor and acceptor, respectively, offered a huge opportunity for the nucleation and growth of metal nanoparticles. Significantly, the as-prepared catalyst Ag/TPP-CTF shows excellent catalytic activity (up to 99%) toward the carboxylative cyclization of propargyl alcohols with CO2 at room temperature, achieving record-breaking activities (TOF up to 615 h-1 at 1 bar and 3077 h-1 at 10 bar). Moreover, the catalyst can be easily recovered and reused at least 10 times with retention of high catalytic activity. The possible mechanism involves small-sized AgNP-mediated alkyne activation, which may promote highly efficient and green conversion of CO2. This work paves the way for immobilizing metal nanoparticles onto functional POPs by surface structure changes for enhanced CO2 catalysis.

Recent Advances and Future Perspectives of Lead-Free Halide Perovskites for Photocatalytic CO2 Reduction

It is still challenging to design and develop the state-of-the-art photocatalysts toward CO2 photoreduction. Enormous researchers have focused on the halide perovskites in the photocatalytic field for CO2 photoreduction, due to their excellent optical and physical properties. The toxicity of lead-based halide perovskites prevents their large-scale applications in photocatalytic fields. In consequence, lead-free halide perovskites (LFHPs) without the toxicity become the promising alternatives in the photocatalytic application for CO2 photoreduction. In recent years, the rapid advances of LFHPs have offer new chances for the photocatalytic CO2 reduction of LFHPs. In this review, we summarize not only the structures and properties of A2 BX6 , A2 B(I)B(III)X6 , and A3 B2 X9 -type LFHPs but also their recent progresses on the photocatalytic CO2 reduction. Furthermore, we also point out the opportunities and perspectives to research LFHPs photocatalysts for CO2 photoreduction in the future.

Recent advances of Cp*Ir complexes for transfer hydrogenation: focus on formic acid/formate as hydrogen donors

Transfer hydrogenation reactions offer synthetically powerful strategies to deliver various hydrogenated compounds with the advantages of efficiency, atom economy, and practicability. On one hand, formic acid/formate function as promising hydrogen sources owing to their readily obtainable, inexpensive, and easy to handle nature. On the other hand, Cp*Ir complexes show high activities in transfer hydrogenation. This review highlights progress achieved for transfer hydrogenation of CO, CC, and CN bonds of a variety of unsaturated substrates, as well as amides focusing on Cp*Ir complexes as catalysts and formic acid/formate as hydrogen sources.

Exploring the Parameters Controlling Product Selectivity in Electrochemical CO2 Reduction in Competition with Hydrogen Evolution Employing Manganese Bipyridine Complexes

Selective reduction of CO₂ is an efficient solution for producing nonfossil-based chemical feedstocks and simultaneously alleviating the increasing atmospheric concentration of this greenhouse gas. With this aim, molecular electrocatalysts are being extensively studied, although selectivity remains an issue. In this work, a combined experimental-computational study explores how the molecular structure of Mn-based complexes determines the dominant product in the reduction of CO₂ to HCOOH, CO, and H₂. In contrast to previous Mn(bpy-R)(CO)₃Br catalysts containing alkyl amines in the vicinity of the Br ligand, here, we report that bpy-based macrocycles locking these amines at the side opposite to the Br ligand change the product selectivity from HCOOH to H₂. Ab initio molecular dynamics simulations of the active species showed that free rotation of the Mn(CO)₃ moiety allows for the approach of the protonated amine to the reactive center yielding a Mn-hydride intermediate, which is the key in the formation of H₂ and HCOOH. Additional studies with DFT methods showed that the macrocyclic moiety hinders the insertion of CO₂ to the metal hydride favoring the formation of H₂ over HCOOH. Further, our results suggest that the minor CO product observed experimentally is formed when CO₂ adds to Mn on the side opposite to the amine ligand before protonation. These results show how product selectivity can be modulated by ligand design in Mn-based catalysts, providing atomistic details that can be leveraged in the development of a fully selective system.

High-Surface-Area Metalloporphyrin-Based Porous Ionic Polymers by the Direct Condensation Strategy for Enhanced CO2 Capture and Catalytic Conversion into Cyclic Carbonates

Metalloporphyrin-based porous organic polymers (POPs) that behave as advanced biomimetic nanoreactors have drawn continuous attention for heterogeneous CO₂ catalysis in the past decades. Inspired by the double activation model of epoxides, the design and synthesis of metalloporphyrin-based porous ionic polymers (PIPs) are considered as one of the most promising approaches for converting CO₂ to cyclic carbonates under cocatalyst- and solvent-free conditions. To overcome the obstacle of poor reaction activity of ionic monomers or highly irregular stacking architecture, in this paper, we have proposed and demonstrated a modular bottom-up approach for constructing a series of high-surface-area metalloporphyrin-based PIPs in high yields by the direct condensation strategy, thus boosting the close contact of multiple active sites and achieving the enhanced CO₂ capture and catalytic conversion into cyclic carbonates with high turnover frequencies under mild conditions. These recyclable aluminum-porphyrin-based PIPs are featured with high surface areas, prominent CO₂ adsorptive capacities, rigid porphyrin skeletons, and flexible ionic pendants, as well as the matched amounts and spatial positions of metal centers and ionic sites, in which is demonstrated to be one of the quite competitive catalysts. Therefore, this strategy of introducing ionic components into the porphyrin frameworks as flexible side chains rather than main chains and adjusting the reactivity ratios of comonomers by structure-oriented methods, provides feasible guidance for the multifunctionalization of metalloporphyrin-based POPs, thereby increasing the accessibility of multiple active sites and improving their synergistic catalytic behavior.

Syntheses of Heterometallic Neodymium-Zinc Complexes and Their Performance in the Copolymerization of CO2 and Cyclohexene Oxide

A series of Nd-Zn heterometallic complexes bearing o-phenylenediamine-bridged tris(phenolato) ligands (L) were synthesized and characterized. By tuning the backbones of ancillary tris(phenolato) ligands and initiating benzyloxy groups, a Nd-Zn heterometallic complex 12 (^ClLNdZnOBn^CF3) was found to be highly active for the copolymerization of CO₂ and cyclohexene oxide (CHO) to produce perfect alternating poly(cyclohexene carbonate) with a high turnover frequency up to 5640 h^-1 under the polymerization of 90 °C and 20 bar CO₂ pressure. The kinetics study showed that CO₂/CHO copolymerization catalyzed by 12 was the first order dependence of 12 and CHO concentration and the zero-order dependence of CO₂ pressure. The reaction of 12 with CO₂ generated a carbonate-coordinated [NdZnNd] trinuclear complex 13, which was believed to be the key intermediate to initiate CO₂/CHO copolymerization. On the basis of some experiments, a plausible synergistic polymerization mechanism was proposed.

Exovinylene Cyclic Carbonates: Multifaceted CO2 -Based Building Blocks for Modern Chemistry and Polymer Science

Carbon dioxide is a renewable, inexhaustible, and cheap alternative to fossil resources for the production of fine chemicals and plastics. It can notably be converted into exovinylene cyclic carbonates, unique synthons gaining momentum for the preparation of an impressive range of important organic molecules and functional polymers, in reactions proceeding with 100 % atom economy under mild operating conditions in most cases. This Review summarizes the recent advances in their synthesis with particular attention on describing the catalysts needed for their preparation and discussing the unique reactivity of these CO₂ -based heterocycles for the construction of diverse organic building blocks and (functional) polymers. We also discuss the challenges and the future perspectives in the field.

Oxovanadium(V)-Catalyzed Synthesis of Ureas from Disilylamines and Carbon Dioxide under Ambient Pressure

Here, a commercially available easy-to-handle oxovanadium(V) compound is demonstrated to serve as an efficient catalyst for the synthesis of ureas from disilylamines and carbon dioxide under ambient pressure. The catalytic activation of carbon dioxide proceeds without any additives, demonstrating a broad substrate scope and easy scalability to validate this catalytic activation of carbon dioxide. This catalytic system can be applied to the synthesis of unsymmetric ureas and chiral urea with retention of chirality.

Advances in Palladium-Catalyzed Carboxylation Reactions

In this short review, we highlight the advancements in the field of palladium-catalyzed carbon dioxide utilization for the synthesis of high value added organic molecules. The review is structured on the basis of the kind of substrate undergoing the Pd-catalyzed carboxylation process. Accordingly, after the introductory section, the main sections of the review will illustrate Pd-catalyzed carboxylation of olefinic substrates, acetylenic substrates, and other substrates (aryl halides and triflates).