Selective Oxidation of 5-Hydroxymethylfurfural to 2,5-Diformylfuran by Visible Light-Driven Photocatalysis over In Situ Substrate-Sensitized Titania

Immobilised Ruthenium Complexes for the Electrooxidation of 5-Hydroxymethylfurfural

Abundantly available biomass-based platform chemicals, including 5-hydroxymethylfurfural (HMF), are essential stepping stones in steering the chemical industry away from fossil fuels. The efficient catalytic oxidation of HMF to its diacid derivative, 2,5-furandicarboxylic acid (FDCA), is a promising research area with potential applications in the polymer industry. Currently, the most encouraging approaches are based on solid-state catalysts and are often conducted in basic aqueous media, conditions where HMF oxidation competes with its decomposition. Efficient molecular catalysts are practically unknown for this reaction. In this study, we report on the synthesis and electrocatalysis of surface-bound molecular ruthenium complexes for the transformation of HMF to FDCA under acidic conditions. Catalyst immobilisation on mesoporous indium tin oxide electrodes is achieved through the incorporation of phosphonic acid anchoring groups. Screening experiments with HMF and further reaction intermediates revealed the catalytic route and bottlenecks in the catalytic synthesis of FDCA. Utilising these immobilised electrocatalysts, FDCA yields of up to 85 % and faradaic efficiencies of 91 % were achieved, without any indication of substrate decomposition. Surface analysis by X-ray photoelectron spectroscopy (XPS) post-electrocatalysis unveiled the desorption of the catalyst from the electrode surface as a limiting factor in terms of catalytic performance.

Sonocatalytic Activity of Porous Carbonaceous Materials for the Selective Oxidation of 4-Hydroxy-3,5-dimethoxybenzyl Alcohol

Selective oxidation, which is crucial in diverse chemical industries, transforms harmful chemicals into valuable compounds. Heterogeneous sonocatalysis, an emerging sustainable approach, urges in-depth exploration. In this work, we investigated N-doped or non-doped carbonaceous materials as alternatives to scarce, economically sensitive metal-based catalysts. Having synthesized diverse carbons using a hard-template technique, we subjected them to sonication at frequencies of 22, 100, 500, and 800 kHz with a 50% amplitude. Sonochemical reaction catalytic tests considerably increased the catalytic activity of C-meso (non-doped mesoporous carbon material). The scavenger test showed a radical formation when this catalyst was used. N-doped carbons did not show adequate and consistent sonoactivity for the selective oxidation of 4-Hydroxy-3,5 dimethoxybenzyl alcohol in comparison with control conditions without sonication, which might be associated with an acid-base interaction between the catalysts and the substrate and sonoactivity prohibition by piridinic nitrogen in N-doped catalysts.

Construction of Monoatomic-Modified Defective Ti4+αTi3+1-αO2-δ Nanofibers for Photocatalytic Oxidation of HMF to Valuable Chemicals

Efficiently upgrading 5-hydroxymethylfurfural (HMF) into high-value-added products, such as 2,5-diformylfuran (DFF) and 2,5-furan dicarboxylic acid (FDCA), through a photocatalytic process by using solar energy has been incessantly pursued worldwide. Herein, a series of transition-metal (TM = Ni, Fe, Co, Cu) single atoms were supported on Ti4+αTi3+1-αO2-δ nanofibers (NFs) with certain defects (Ov), denoted as TM SAC-Ti4+αTi3+1-αO2-δ NFs (TM = Ni, Fe, Co, Cu), aiming to enhance the photocatalytic conversion of HMF. A super HMF conversion rate of 57% and a total yield of 1718.66 μmol g-1 h-1 (DFF and FDCA) surpassing that of the Ti4+αTi3+1-αO2-δ NFs by 1.6 and 2.1 times, respectively, are realized when TM is Co (Co SAC-Ti4+αTi3+1-αO2-δ NFs). Experiments combined with density functional theory calculation (DFT) demonstrate that the TM single atoms occupy the Ti site of Ti4+αTi3+1-αO2-δ NFs, which plays a dominant role in the photo-oxidation of HMF. Raman, X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) characterizations confirm the strong electron local exchange interaction in TM SAC-Ti4+αTi3+1-αO2-δ NFs and demonstrate the substitution of Ti by the TM SACs. The projected density of states and charge density difference reveal that the strong interaction between metal-3d and O-2p orbitals forms Ti-O-TM bonds. The bonds are identified as the adsorption site, where TM single atoms on the surface of Ti4+αTi3+1-αO2-δ NFs reduce HMF molecule adsorption energy (Eads). Furthermore, the TM single atom modulates the electronic structure of TM SAC-Ti4+αTi3+1-αO2-δ NFs through electron transfer, leading to narrow band gaps of the photocatalysts and enhancing their photocatalytic performance. This study has uncovered a newer strategy for enhancing the photocatalytic attributes of semiconducting materials.

Band Structure Engineering of Polyimide Photocatalyst for Efficient and Selective Oxidation of Biomass-Derived 5-Hydroxymethylfurfural

Solar-driven high-value utilization of biomass and its derivatives has attracted tremendous attention in replacing fossil sources to generate chemicals. Developing high-performance photocatalysts to selectively catalyze bio-platform molecules remains a challenge. Herein, biomass-based 5-hydroxymethylfurfural (HMF) was efficiently and selectively photooxidized to 2, 5-diformylfuran (DFF) using a metal-free polyimide (PI). PI with moderate photooxidation capacity delivered high DFF selectivity of 91 % and high apparent quantum efficiency of 1.13 %, nearly 7 times higher than that of graphitic carbon nitride. Experimental measurements and theoretical calculations revealed that the band structure and photooxidation capability of PI can be continuously modulated by varying the molar ratio of amine and anhydride. Mechanism analysis depicted that holes and superoxide radicals play crucial roles in the efficient photooxidation of HMF to DFF. This work provides guidance on designing efficient polymeric photocatalysts for oxidating biomass and its derivatives to value-added chemicals.

Radical-Mediated Photocatalysis for Lignocellulosic Biomass Conversion into Value-Added Chemicals and Hydrogen: Facts, Opportunities and Challenges

Photocatalytic biomass conversion into high-value chemicals and fuels is considered one of the hottest ongoing research and industrial topics toward sustainable development. In short, this process can cleave Cβ -O/Cα -Cβ bonds in lignin to aromatic platform chemicals, and further conversion of the polysaccharides to other platform chemicals and H2 . From the chemistry point of view, the optimization of the unique cooperative interplay of radical oxidation species (which are activated via molecular oxygen species, ROSs) and substrate-derived radical intermediates by appropriate control of their type and/or yield is key to the selective production of desired products. Technically, several challenges have been raised that face successful real-world applications. This review aims to discuss the recently reported mechanistic pathways toward selective biomass conversion through the optimization of ROSs behavior and materials/system design. On top of that, through a SWOT analysis, we critically discussed this technology from both chemistry and technological viewpoints to help the scientists and engineers bridge the gap between lab-scale and large-scale production.

Revealing Photocatalytic Performance of ZnxCd1-xS Nanoparticles Depending on the Irradiation Wavelength

Photocatalysts are useful for various applications, including the conservation and storage of energy, wastewater treatment, air purification, semiconductors, and production of high-value-added products. Herein, Zn_xCd_1-xS nanoparticle (NP) photocatalysts with different concentrations of Zn²⁺ ions (x = 0.0, 0.3, 0.5, or 0.7) were successfully synthesized. The photocatalytic activities of Zn_xCd_1-xS NPs varied with the irradiation wavelength. X-ray diffraction, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, and ultraviolet-visible spectroscopy were used to characterize the surface morphology and electronic properties of the Zn_xCd_1-xS NPs. In addition, in situ X-ray photoelectron spectroscopy was performed to investigate the effect of the concentration of Zn²⁺ ions on the irradiation wavelength for photocatalytic activity. Furthermore, wavelength-dependent photocatalytic degradation (PCD) activity of the Zn_xCd_1-xS NPs was investigated using biomass-derived 2,5-hydroxymethylfurfural (HMF). We observed that the selective oxidation of HMF using Zn_xCd_1-xS NPs resulted in the formation of 2,5-furandicarboxylic acid via 5-hydroxymethyl-2-furancarboxylic acid or 2,5-diformylfuran. The selective oxidation of HMF was dependent on the irradiation wavelength for PCD. Moreover, the irradiation wavelength for the PCD depended on the concentration of Zn²⁺ ions in the Zn_xCd_1-xS NPs.

Bimetallic TiO2 Nanoparticles for Lignin-Based Model Compounds Valorization by Integrating an Optocatalytic Flow-Microreactor

The challenge of improving the activity of TiO₂ by modifying it with metals and using it for targeted applications in microreactor environments is an active area of research. Recently, microreactors have emerged as successful candidates for many photocatalytic reactions, especially for the selective oxidation process. The current work introduces ultrasound-assisted catalyst deposition on the inner walls of a perfluoro-alkoxy alkane (PFA) microtube under mild conditions. We report Cu-Au/TiO₂ and Fe-Au/TiO₂ nanoparticles synthesized using the sol-gel method. The obtained photocatalysts were thoroughly characterized by UV-Vis diffuse-reflectance spectroscopy (DRS), high-resolution scanning electron microscopy (HR-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and N₂ physisorption. The photocatalytic activity under UV (375 nm) and visible light (515 nm) was estimated by the oxidation of lignin-based model aromatic alcohols in batch and fluoropolymer-based flow systems. The bimetallic catalyst exhibited improved photocatalytic selective oxidation. Herein, four aromatic alcohols were individually investigated and compared. In our experiments, the alcohols containing hydroxy and methoxy groups (coniferyl and vanillin alcohol) showed high conversion (93% and 52%, respectively) with 8% and 17% selectivity towards their respective aldehydes, with the formation of other side products. The results offer an insight into ligand-to-metal charge transfer (LMCT) complex formation, which was found to be the main reason for the activity of synthesized catalysts under visible light.

Photocatalytic Aerobic Oxidation of Biomass-Derived 5-HMF to DFF over MIL-53(Fe)/g-C3N4 Composite

A MIL-53(Fe)/g-C₃N₄ heterogeneous composite was synthesized and applied in photocatalytic oxidation of 5-hydroxymethylfurfural (5-HMF) to 2,5-diformylfuran (DFF). The systematic investigation indicated that the introduction of MIL-53(Fe) into g-C₃N₄ increased the specific surface area, broadened the visible-light response region, and promoted the separation efficiency of the photo-generated electron-hole pairs. The 10% MIL-53(Fe)/g-C₃N₄ heterogeneous composite achieved the best photocatalytic oxidation activity with 74.5% of 5-HMF conversion under simulated sunlight, which was much higher than that of pristine g-C₃N₄ and MIL-53(Fe). The MIL-53(Fe)/g-C₃N₄ composite displayed good photocatalytic reusability and stability. Based on the characterization results and photocatalytic performance, a Z-scheme photocatalytic mechanism of the MIL-53(Fe)/g-C₃N₄ composite was suggested, and a possible reaction route was deduced.

A Light(er) Approach for the Selective Hydrogenation of 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)furan without External H2

The selective conversion of 5-hydroxymethyfurfural (HMF), a biomass-derived platform molecule, to value added chemicals can ease the burden on petroleum-based fine chemical synthesis. The active contribution of renewable energy sources along with low cost, environmental friendliness, and a simple reaction system must be adopted for better sustainability. In this context, photocatalytic selective hydrogenation of HMF to 2,5-bis(hydroxymethyl)furan (BHMF) was achieved over P25 titania nanoparticles without chemical squander. Simultaneously the photo-oxidation of p-methoxybenzyl alcohol (MeOBA) to p-methoxybenzaldehyde (MeOBaL), similar to biomass-derived vanillin, was carried out, abolishing the need of additional redox reagents. This system put forward the competent employment of photogenerated excitons for the valorization of lignocellulosic biomass to fine chemicals, which is an urgent requirement for sustainable chemical synthesis.

Electro- and Photocatalytic Oxidative Upgrading of Bio-based 5-Hydroxymethylfurfural

Conversion of biomass into biofuels and high value-added chemicals is a promising strategy to solve the increasingly deteriorating environmental problems caused by fossil energy consumption. The development of efficient technologies and methods is the premise and guarantee to realize the high-value conversion of biomass. 5-Hydroxymethylfurfural (HMF), as a versatile biomass platform compound, is generated via dehydration of hexoses (e. g., fructose and glucose) derived from cellulosic biomass. This Review gives an overview of the advances and challenges of electro- and photocatalytic oxidation of biomass-derived HMF to high-value chemicals such as 2,5-formylfuran (DFF) and 2,5-furandicarboxylic acid (FDCA). These strategies and methods for the preparation of high-value chemicals by electro- and photocatalytic oxidation of HMF, coupled with, for example, hydrogen evolution reaction, organic substrate reduction, CO₂ reduction reaction, or N₂ reduction reaction, were summarized and discussed. Moreover, the catalytic efficiency and mechanism of different types of catalysts were also introduced in these conversion systems.

Cellulose-Derived Carbon Dot-Guided Growth of ZnIn2 S4 Nanosheets for Photocatalytic Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran

Cellulose-derived carbon (CC) dot-directed growth of ZnIn₂ S₄ was achieved through hydrothermal treatment of carboxylated cellulose followed by in situ growth of ZnIn₂ S₄ nanosheets. The carbon dots inherited from carboxylated cellulose equip plenty of surface carboxyl groups, which induce the ionic interaction with Zn²⁺ and In³⁺ and the guided growth of ZnIn₂ S₄ . As a result, the nanosheets of ZnIn₂ S₄ are evenly and intimately grown on the small carbon dots, providing high-speed channels for charges transfer. In conjunction with the reinforced visible-light capture and good conductivity of carbon dots, the resultant CC/ZnIn₂ S₄ shows an outstanding photocatalytic activity. As a proof-of-concept, visible-light-driven 5-hydroxymethylfurfural oxidation into 2,5-diformylfuran was conducted. The evolution of 2,5-diformylfuran over the optimal CC/ZnIn₂ S₄ sample can reach ∼2980 μmol g^-1 , about 3.4 times that of pristine ZnIn₂ S₄ . Additionally, the apparent quantum yield could attain 3.4 % at a wavelength of 400 nm.

Synergistic Modulation of the Separation of Photo-Generated Carriers via Engineering of Dual Atomic Sites for Promoting Photocatalytic Performance

The separation efficiency of photo-generated carriers is still a great challenge that restricts the practical application of photocatalytic technology. The design of spatial separation path for photo-generated carriers at atomic level provides an innovative approach to address this challenge. Herein, a facile dual atomic sites strategy, consisting of Cu-N₄ and C-S-C active moieties decorated on polymeric carbon nitride (Cu SAs/p-CNS) is reported to simultaneously achieve the highly efficient separation of photo-generated electrons and holes for boosting photocatalytic performance. As a proof of concept, the Cu SAs/p-CNS is successfully applied to the photo-oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF), which exhibits 77.1% HMF conversion and 85.6% DFF selectivity under visible light irradiation. The activity is considerably higher than that of bulk p-CN, S doped p-CN, and p-CN supported Cu single atom catalysts. Theoretical calculations and experimental results suggest that, during photocatalytic reaction, the isolated Cu-N₄ sites directly capture photo-generated electrons, while the surrounding S atoms bear photo-generated holes, which synergistically facilitates the separation of photo-generated carriers and thus results in enhanced photocatalytic activity. This study provides a new perspective for the rational design of high performance photocatalysts at atomic level.

Titania/chitosan–lignin nanocomposite as an efficient photocatalyst for the selective oxidation of benzyl alcohol under UV and visible light

Developing functional materials from biomass is a significant research subject due to its unique structure, abundant availability, biodegradability and low cost. A series of chitosan–lignin (CL) composites were prepared through a hydrothermal method by varying the weight ratio of chitosan and lignin. Subsequently, these CL composites were combined with titania (T) to form a nanocomposite (T/CL) using sol–gel and hydrothermal based methods. T/CL nanocomposites exhibited improved photocatalytic performance in comparison with sol–gel and hydrothermally prepared pristine titania (SGH-TiO₂), towards the selective oxidation of benzyl alcohol (BnOH) to benzaldehyde (Bnald) under UV (375 nm) and visible light (515 nm). More specifically, the 75T/CL(25 : 75) nanocomposite (a representative photocatalyst from the 75T/CL nanocomposite series) showed very high selectivity (94%) towards Bnald at 55% BnOH conversion under UV light. Whereas, SGH-TiO₂ titania exhibited much lower (68%) selectivity for Bnald at similar BnOH conversion. Moreover, the 75T/CL(25 : 75) nanocomposite also showed excellent Bnald selectivity (100%) at moderate BnOH conversion (19%) under visible light. Whereas, SGH-TiO₂ did not show any activity for BnOH oxidation under visible light. XPS studies suggest that the visible light activity of the 75T/CL(25 : 75) nanocomposite is possibly related to the doping of nitrogen into titania from chitosan. However, according to UV-visible-DRS results, no direct evidence pertaining to the decrease in band-gap energy of titania was found upon coupling with the CL composite and the visible light activity was attributed to N-doping of titania. Overall, it was found that T/CL nanocomposites enhanced the photocatalytic performance of titania via improved light harvesting and higher selectivity through mediation of active radical species.

Combining titania with chitosan–lignin composites results in an active and selective photocatalyst for the oxidation of benzyl alcohol to benzaldehyde under green light (515 nm).

Au/TiO2 nanobelts: thermal enhancement vs. plasmon enhancement for visible-light-driven photocatalytic selective oxidation of amines into imines

Au NPs improve the photocatalytic activity of TiO2 only in a low temperature range. Excessive Au NPs loaded on TiO2 inhibit the photocatalytic amine conversion due to the decreased oxygen vacancies and poor amine adsorption ability.

Photocatalytic processes for biomass conversion

This review focuses on the photocatalytic conversion of biomass, emphasizing several types of systems, including different photocatalysts and biomass derivatives.