Monitoring of freshwater toxins in European environmental waters by using novel multi-detection methods

Understanding the Risks of Diffusion of Cyanobacteria Toxins in Rivers, Lakes, and Potable Water

Blue-green algae, or cyanobacteria, may be prevalent in our rivers and tap water. These minuscule bacteria can grow swiftly and form blooms in warm, nutrient-rich water. Toxins produced by cyanobacteria can pollute rivers and streams and harm the liver and nervous system in humans. This review highlights the properties of 25 toxin types produced by 12 different cyanobacteria genera. The review also covered strategies for reducing and controlling cyanobacteria issues. These include using physical or chemical treatments, cutting back on fertilizer input, algal lawn scrubbers, and antagonistic microorganisms for biocontrol. Micro-, nano- and ultrafiltration techniques could be used for the removal of internal and extracellular cyanotoxins, in addition to powdered or granular activated carbon, ozonation, sedimentation, ultraviolet radiation, potassium permanganate, free chlorine, and pre-treatment oxidation techniques. The efficiency of treatment techniques for removing intracellular and extracellular cyanotoxins is also demonstrated. These approaches aim to lessen the risks of cyanobacterial blooms and associated toxins. Effective management of cyanobacteria in water systems depends on early detection and quick action. Cyanobacteria cells and their toxins can be detected using microscopy, molecular methods, chromatography, and spectroscopy. Understanding the causes of blooms and the many ways for their detection and elimination will help the management of this crucial environmental issue.

Precision early detection of invasive and toxic cyanobacteria: A case study of Raphidiopsis raciborskii

Blooms of the toxic cyanobacterium, Raphidiopsis raciborskii (basionym Cylindrospermopsis raciborskii), are becoming a major environmental issue in freshwater ecosystems globally. Our precision prevention and early detection of R. raciborskii blooms rely upon the accuracy and speed of the monitoring method. A duplex digital PCR (dPCR) monitoring approach was developed and validated to detect the abundance and toxin-producing potential of R. raciborskii simultaneously in both laboratory spiked and environmental samples. Results of dPCR were strongly correlated with traditional real time quantitative PCR (qPCR) and microscopy for both laboratory and environmental samples. However, discrepancies between methods were observed when measuring R. raciborskii at low abundance (1 - 10⁵ cells L ^- 1), with dPCR showing a higher precision compared to qPCR at low cell concentration. Furthermore, the dPCR assay had the highest detection rate for over two hundred environmental samples especially under low abundance conditions, followed by microscopy and qPCR. dPCR assay had the advantages of simple operation, time-saving, high sensitivity and excellent reproducibility. Therefore, dPCR would be a fast and precise monitoring method for the early warning of toxic bloom-forming cyanobacterial species and assessment of water quality risks, which can improve prediction and prevention of the impacts of harmful cyanobacterial bloom events in inland waters.

Occurrence of cylindrospermopsin, anatoxin-a and their homologs in the southern Czech Republic - Taxonomical, analytical, and molecular approaches

Water bloom-forming cyanobacteria have a severe impact on freshwater quality. Although some cyanobacterial toxins such as microcystins have been studied extensively, other toxins like anatoxin-a (ATX) and their structural analogs - as well as cyanobacterial taxa producing these toxins remain to be explored in detail. The present study investigated levels of ATX, CYN and their homologs along with the occurrence of anaC and cyrJ genes in water blooms in 16 sites in the Czech Republic that were pre-selected concerning the presence of potential toxin producers. Besides, we also studied toxins and genes in a series of strains available in our laboratories. ATX and its congener HATX were detected in 5 natural biomass samples from the Czech Republic (maximum concentration 2.8 micrograms per gram d.w.). Interestingly, the anaC gene coding for ATX production was not detected in any of these toxin-positive biomass samples. The concentrations of ATX congeners in cyanobacterial laboratory strains were about 10-times higher than those of the original ATX, which calls for further research addressing levels and hazards of ATX analogs. Regarding the CYN and 7-deoxyCYN (other CYN congeners were not analyzed in this study) - these toxins were identified in a single small pond in the Czech Republic at concentrations 4.3 and 2.7 micrograms per gram of biomass d.w., respectively (corresponded to dissolved concentrations higher than 1 microgram per liter). The CYN-positive sample was dominated by CYN-producing taxa Raphidiopsis (basionym Cylindrospermopsis) and Cuspidothrix. We also confirmed the presence of a specific cyrJ gene in this natural bloom sample. To our knowledge, this is the first study pointing to Raphidiopsis (Cylindrospermopsis) and Cuspidothrix as producers of CYN in Europe. This observation calls for further research because of their increasing occurrence in (Central) Europe along with the global change. The present study demonstrates the importance of using combined (taxonomical, analytical, and molecular) approaches in the assessment of hazardous cyanobacteria and their toxins in freshwaters.

Extraction, Properties, and Applications of Bioactive Compounds Obtained from Microalgae

With the increase in the global population, getting new sources of food is essential. One of the solutions can be found in the oceans due to algae. Microalgae are aquatic photosynthetic organisms used mainly due to their variety of bioactive compounds. The consumption of microalgae has been carried out for centuries and is recommended by organizations, such as OMS and FAO, due to its nutritional value and its properties. Based on the existing literature, there is substantial evidence of the nutritional quality of the algae as well as their functional elements. However, much quantification is still necessary, as well as studying possible adverse effects. The present review describes the compounds of alimentary interest present in these algae as well as different extraction techniques assisted by different energetic mechanisms (such as heat, supercritical-fluid, microwave, ultrasound, enzymes, electric field, high hydrostatic pressure, among others). The most challenging and crucial issues are reducing microalgae growth cost and optimizing extraction techniques. This review aimed a better understanding of the uses of microalgae for new researches in nutrition. Since the use of microalgae is still a field in which there is much to discover, it is likely that more benefits will be found in its consumption.

Magnetic nanostructures for marine and freshwater toxins removal

Marine and freshwater toxins contaminate water resources, shellfish and aquaculture products, causing a broad range of toxic effects in humans and animals. Different core-shell nanoparticles were tested as a new sorbent for removing marine and freshwater toxins from liquid media. Water solutions were contaminated with 20 μg/L of marine toxins and up to 50 μg/L of freshwater toxins and subsequently treated with 250 or 125 mg/L of nanoparticles. Under these conditions, carbon nanoparticles removed around 70% of saxitoxins, spirolides, and azaspiracids, and up to 38% of diarrheic shellfish poisoning toxins. In the case of freshwater toxins, the 85% of microcystin LR was eliminated; other cyclic peptide toxins were also removed in a high percentage. Marine toxins were adsorbed in the first 5 min of contact, while for freshwater toxins it was necessary 60 min to reach the maximum adsorption. Toxins were recovered by extraction from nanoparticles with different solvents. Gymnodinium catenatum, Prorocentrum lima, and Microcystis aeruginosa cultures were employed to test the ability of nanoparticles to adsorb toxins in a real environment, and the same efficacy to remove toxins was observed in these conditions. These results suggest the possibility of using the nanotechnology in the treatment of contaminated water or in chemical analysis applications.

Recent developments in the methods of quantitative analysis of microcystins

Cyanotoxins are produced by the toxic cyanobacterial species present in algal blooms formed in water bodies due to nutrient over-enrichment by human influences and natural environmental conditions. Extensive studies are available on the most widely encountered cyanotoxins, microcystins (MCs) in fresh and brackish water bodies. MC contaminated water poses severe risks to human health, environmental sustainability, and aquatic life. Therefore, commonly occurring MCs should be monitored. Occasionally, detection and quantification of these toxins are difficult due to the unavailability of pure standards. Enzymatic, immunological assays, and analytical techniques like protein phosphatase inhibition assay, enzyme-linked immunosorbent assay, high-performance liquid chromatography, liquid chromatography-mass spectrometry, and biosensors are used for their detection and quantification. There is no single method for the detection of all the different types of MCs; therefore, various techniques are often combined to yield reliable results. Biosensor development offered a problem-solving approach in the detection of MCs due to their high accuracy, sensitivity, rapid response, and portability. In this review, an endeavor has been made to uncover emerging techniques used for the detection and quantification of the MCs.

Neurotoxic Anatoxin-a Can Also Exert Immunotoxicity by the Induction of Apoptosis on Carassius auratus Lymphocytes in vitro When Exposed to Environmentally Relevant Concentrations

Hazardous anatoxin-a (ANTX-a) is produced by freshwater algal blooms worldwide, which greatly increases the risk of consumer exposure. Although ANTX-a shows widespread neurotoxicity in aquatic animals, little is known about its mechanism of action and biotransformation in biological systems, especially in immunobiological models. In this study, transmission electron microscopy results showed that ANTX-a can destroy lymphocytes of Carassius auratus in vitro by inducing cytoplasmic concentration, vacuolation, and swollen mitochondria. DNA fragmentations clearly showed a ladder pattern in agarose gel electrophoresis, which demonstrated that the apoptosis of fish lymphocytes was caused by exposure to ANTX-a. Flow cytometry results showed that the apoptotic percentage of fish lymphocytes exposed to 0.01, 0.1, 1, and 10 mg/L of ANTX-a for 12 h reached 18.89, 22.89, 39.23, and 35.58%, respectively. ANTX-a exposure induced a significant increase in reactive oxygen species (ROS) and malonaldehyde (MDA) in lymphocytes. The activities of superoxide dismutase (SOD), catalase (CAT), glutathione reductase (GR), glutathione peroxidase (GPx), and the glutathione (GSH) content of the 0.01 mg/L ANTX-a-treated group decreased significantly by about 41, 46, 67, and 54% compared with that of the control group (p < 0.01), respectively. Although these observations were dose-dependent, these results suggested that ANTX-a can induce lymphocyte apoptosis via intracellular oxidative stress and destroy the antioxidant system after a short exposure time of only 12 h. Besides neurotoxicity, ANTX-a may also be toxic to the immune system of fish, even when the fish are exposed to environmentally relevant concentrations, which clearly demonstrated that the potential health risks induced by ANTX-a in aquatic organisms requires attention.

The Diversity of Cyanobacterial Toxins on Structural Characterization, Distribution and Identification: A Systematic Review

The widespread distribution of cyanobacteria in the aquatic environment is increasing the risk of water pollution caused by cyanotoxins, which poses a serious threat to human health. However, the structural characterization, distribution and identification techniques of cyanotoxins have not been comprehensively reviewed in previous studies. This paper aims to elaborate the existing information systematically on the diversity of cyanotoxins to identify valuable research avenues. According to the chemical structure, cyanotoxins are mainly classified into cyclic peptides, alkaloids, lipopeptides, nonprotein amino acids and lipoglycans. In terms of global distribution, the amount of cyanotoxins are unbalanced in different areas. The diversity of cyanotoxins is more obviously found in many developed countries than that in undeveloped countries. Moreover, the threat of cyanotoxins has promoted the development of identification and detection technology. Many emerging methods have been developed to detect cyanotoxins in the environment. This communication provides a comprehensive review of the diversity of cyanotoxins, and the detection and identification technology was discussed. This detailed information will be a valuable resource for identifying the various types of cyanotoxins which threaten the environment of different areas. The ability to accurately identify specific cyanotoxins is an obvious and essential aspect of cyanobacterial research.

Ultrasensitive strips for the quadruple detection of nitrofuran metabolite residues

In this biosensor system, metabolite residues were derived by using a previous B-CBA synthesis method to label a biotin moiety for enrichment by streptavidin coated magnetic beads. Antibodies specific for derivatives were conjugated with carboxyl-modified barcode DNAs which were used as templates for strand displacement amplification (SDA). The assay can detect trace levels of 7.20 ppt of SEM, 11.58 ppt of AHD, 7.24 ppt of AOZ and 2.31 ppt of AMOZ, respectively.

New Method for Simultaneous Determination of Microcystins and Cylindrospermopsin in Vegetable Matrices by SPE-UPLC-MS/MS

Cyanotoxins are a large group of noxious metabolites with different chemical structure and mechanisms of action, with a worldwide distribution, producing effects in animals, humans, and crop plants. When cyanotoxin-contaminated waters are used for the irrigation of edible vegetables, humans can be in contact with these toxins through the food chain. In this work, a method for the simultaneous detection of Microcystin-LR (MC-LR), Microcystin-RR (MC-RR), Microcystin-YR (MC-YR), and Cylindrospermopsin (CYN) in lettuce has been optimized and validated, using a dual solid phase extraction (SPE) system for toxin extraction and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) for analysis. Results showed linear ranges (5⁻50 ng g-1 f.w.), low values for limit of detection (LOD) (0.06⁻0.42 ng g-1 f.w.), and limit of quantification (LOQ) (0.16⁻0.91 ng g-1 f.w.), acceptable recoveries (41⁻93%), and %RSDIP values for the four toxins. The method proved to be robust for the three variables tested. Finally, it was successfully applied to detect these cyanotoxins in edible vegetables exposed to cyanobacterial extracts under laboratory conditions, and it could be useful for monitoring these toxins in edible vegetables for better exposure estimation in terms of risk assessment.

Validated HPLC-MS/MS Method To Quantify Low Levels of Domoic Acid in Plasma and Urine after Subacute Exposure

Domoic acid (DA) is a marine neurotoxin produced by several species of Pseudo-nitzschia. DA causes severe neurological toxicity in humans and animals. To address the current analytical need to quantify low levels of DA in human and animal body fluids, a sensitive and selective high performance liquid chromatography-tandem mass spectrometry method was developed to measure DA in plasma and urine. This method was fully validated to accurately and precisely quantify DA between 0.31 and 16 ng/mL in plasma and between 7.8 and 1000 ng/mL in urine. Our group introduced the use of a novel internal standard, tetrahydrodomoic acid to control for matrix effects and other sources of variability. This validated method will be useful to assess DA concentrations in biological samples of human or animal origin after suspected DA exposure from contaminated food. It will also be applicable to sentinel programs and research studies to analyze body fluids with low levels of DA.

Molecular detection of harmful cyanobacteria and expression of their toxin genes in Dutch lakes using multi-probe RNA chips

Harmful cyanobacterial blooms are a major threat to water quality and human health. Adequate risk assessment is thus required, which relies strongly on comprehensive monitoring. Here, we tested novel multi-probe RNA chips developed in the European project, μAqua, to determine the abundance of harmful cyanobacterial species and expression of selected toxin genes in six Dutch lakes. All of the targeted cyanobacterial genera, except for Planktothrix, were detected using the microarray, with predominance of Dolichospermum and Microcystis signals, of which the former was found across all sites and detected by the probes for Anabaena where it was formerly placed. These were confirmed by microscopic cell counts at three sites, whereas at the other sites, microscopic cell counts were lower. Probe signals of Microcystis showed larger variation across sites but also matched microscopic counts for three sites. At the other sites, microscopic counts were distinctly higher. We detected anatoxin-a in the water at all sites, but unfortunately no genes for this toxin were on this generation of the toxin array. For microcystins, we found none or low concentrations in the water, despite high population densities of putative microcystin producers (i.e. Microcystis, Dolichospermum). The described method requires further testing with a wider range of cyanobacterial communities and toxin concentrations before implementation into routine cyanobacterial risk assessment. Yet, our results demonstrate a great potential for applying multi-probe RNA chips for species as well as toxins to eutrophic waters with high cyanobacterial densities as a routine monitoring tool and as a predictive tool for toxin potential.

Seasonal dynamics of freshwater pathogens as measured by microarray at Lake Sapanca, a drinking water source in the north-eastern part of Turkey

Monitoring drinking water quality is an important public health issue. Two objectives from the 4 years, six nations, EU Project μAqua were to develop hierarchically specific probes to detect and quantify pathogens in drinking water using a PCR-free microarray platform and to design a standardised water sampling program from different sources in Europe to obtain sufficient material for downstream analysis. Our phylochip contains barcodes (probes) that specifically identify freshwater pathogens that are human health risks in a taxonomic hierarchical fashion such that if species is present, the entire taxonomic hierarchy (genus, family, order, phylum, kingdom) leading to it must also be present, which avoids false positives. Molecular tools are more rapid, accurate and reliable than traditional methods, which means faster mitigation strategies with less harm to humans and the community. We present microarray results for the presence of freshwater pathogens from a Turkish lake used drinking water and inferred cyanobacterial cell equivalents from samples concentrated from 40 into 1 L in 45 min using hollow fibre filters. In two companion studies from the same samples, cyanobacterial toxins were analysed using chemical methods and those dates with highest toxin values also had highest cell equivalents as inferred from this microarray study.

Array-based detection of isomeric and analogous analytes employing synthetically modified fluorophore attached β-cyclodextrin derivatives

Improved selectivity and sensitivity using covalent fluorophore–cyclodextrin analogues resulted in 100% successful classification for five classes of analytes.

Microarray (phylochip) analysis of freshwater pathogens at several sites along the Northern German coast transecting both estuarine and freshwaters

Monitoring the quality of drinking water is an important issue for public health. Two of the main objectives of the European Project μAQUA were (i) the development of specific probes to detect and quantify pathogens in drinking water and (ii) the design of standardized sampling programs of water from different sources in Europe in order to obtain sufficient material for downstream analysis. Our phylochip contains barcodes that specifically identify freshwater pathogens for enabling the detection of organisms that can be risks for human health. Monitoring for organisms with molecular tools is rapid, more accurate and more reliable than traditional methods. Rapid detection means that mitigation strategies come into play faster with less harm to the community and to humans. Samples were collected from several waters in France, Germany, Ireland, Italy and Turkey over 2 years. We present microarray results for the presence of freshwater pathogens from brackish and freshwater sites in Northern Germany, and cyanobacterial cell numbers inferred from these sites. In a companion study from the same samples, cyanobacterial toxins were analyzed using two methods and those sites with highest toxin values also had highest cell numbers as inferred from this microarray study.