Enhancing the biological activity of immobilized osteopontin using a type-1 collagen affinity coating

Surface immobilized α-1 acid glycoprotein and collagen VI modulate mouse macrophage polarization and reduce the foreign body capsule

Macrophages are widely recognized in modulating the foreign body response, and the manner in which they do so largely depends on their activation state, often referred to as their polarization. This preliminary study demonstrates that surface immobilized α-1 acid glycoprotein (AGP), as well as collagen VI (Col6) in conjunction with AGP, can direct macrophages towards the M2 polarization state in vitro and modify the foreign body response in vivo. AGP and Col6 are immobilized onto poly(2-hydroxyethyl methacrylate) (pHEMA) surfaces using carbonyl diimidazole chemistry. Mouse bone marrow derived macrophages are cultured on modified surfaces with or without lipopolysaccharide stimulation. Surface modified pHEMA discs are implanted subcutaneously into mice to observe differences in the foreign body response. After stimulation with lipopolysaccharide, macrophages cultured on AGP or Col6 modified surfaces showed a reduction in TNF-α expression compared to controls. Arg1 expression was also increased in macrophages cultured on modified surfaces. Explanted tissues showed that the foreign body capsule around implants with AGP or AGP and Col6 modification had reduced thickness, while also being more highly vascularized. These data demonstrate that α-1 acid glycoprotein and collagen VI could potentially be used for the surface modification of medical devices to influence macrophage polarization leading to a reduced and modulated foreign body response.

BioAdhere: tailor-made bioadhesives for epiretinal visual prostheses

Introduction: Visual prostheses, i.e. epiretinal stimulating arrays, are a promising therapy in treating retinal dystrophies and degenerations. In the wake of a new generation of devices, an innovative method for epiretinal fixation of stimulator arrays is required. We present the development of tailor-made bioadhesive peptides (peptesives) for fixating epiretinal stimulating arrays omitting the use of traumatic retinal tacks. Materials and methods: Binding motifs on the stimulating array (poly[chloro-p-xylylene] (Parylene C)) and in the extracellular matrix of the retinal surface (collagens I and IV, laminin, fibronectin) were identified. The anchor peptides cecropin A (CecA), KH1, KH2 (author's initials) and osteopontin (OPN) were genetically fused to reporter proteins to assess their binding behavior to coated microtiter plates via fluorescence-based assays. Domain Z (DZ) of staphylococcal protein A was used as a separator to generate a bioadhesive peptide. Following ISO 10993 "biological evaluation of medical materials", direct and non-direct cytotoxicity testing (L-929 and R28 retinal progenitor cells) was performed. Lastly, the fixating capabilities of the peptesives were tested in proof-of-principle experiments. Results: The generation of the bioadhesive peptide required evaluation of the N- and C-anchoring of investigated APs. The YmPh-CecA construct showed the highest activity on Parylene C in comparison with the wildtype phytase without the anchor peptide. eGFP-OPN was binding to all four investigated ECM proteins (collagen I, laminin > collagen IV, fibronectin). The strongest binding to collagen I was observed for eGFP-KH1, while the strongest binding to fibronectin was observed for eGFP-KH2. The selectivity of binding was checked by incubating eGFP-CecA and eGFP-OPN on ECM proteins and on Parylene C, respectively. Direct and non-direct cytotoxicity testing of the peptide cecropin-A-DZ-OPN using L-929 and R28 cells showed good biocompatibility properties. Proof-of-concept experiments in post-mortem rabbit eyes suggested an increased adhesion of CecA-DZ-OPN-coated stimulating arrays. Conclusion: This is the first study to prove the applicability and biocompatibility of peptesives for the fixation of macroscopic objects.

Comparison of Synthetic vs. Biogenic Polymeric Process-Directing Agents for Intrafibrillar Mineralization of Collagen

With the aging population, there is a growing need for mineralized tissue restoration and synthetic bone substitutes. Previous studies have shown that a polymer-induced liquid-precursor (PILP) process can successfully mineralize collagen substrates to achieve compositions found in native bone and dentin. This process also leads to intrafibrillar apatitic crystals with their [001] axes aligned roughly parallel to the long axis of the collagen fibril, emulating the nanostructural organization found in native bone and dentin. When demineralized bovine bone was remineralized via the PILP process using osteopontin (OPN), the samples were able to activate mouse marrow-derived osteoclasts to similar levels to those of native bone, suggesting a means for fabricating bioactive bone substitutes that could trigger remodeling through the native bone multicellular unit (BMU). In order to determine if OPN derived from bovine milk could be a cost-effective process-directing agent, the mineralization of type I collagen scaffolds using this protein was compared to the benchmark polypeptide of polyaspartic acid (sodium salt; pAsp). In this set of experiments, we found that OPN led to much faster and more uniform mineralization when compared with pAsp, making it a cheaper and commercially attractive alternative for mineralized tissue restorations.

Development of a two-stage in vitro model system to investigate the mineralization mechanisms involved in idiopathic stone formation: stage 1-biomimetic Randall's plaque using decellularized porcine kidneys

Idiopathic calcium oxalate (CaOx) stone formers form stones that are commonly attached to calcium phosphate (CaP) deposits in the renal tissue, known as Randall's plaques (RP). Plaques are suggested to originate in the renal tubular basement membrane, where they exhibit a morphology of concentrically laminated apatitic spherules, while in the interstitial regions, the collagen fibrils and vesicles become mineralized. We hypothesize that these minerals might form by non-classical crystallization mechanisms, such as via amorphous precursors, some of which might originate from a polymer-induced liquid-precursor (PILP) process. Thus, our goal is to identify mineralogical 'signatures' of various stone formation mechanisms. To do this for idiopathic CaOx stones, we are developing a two-stage model system of CaP-CaOx composite stones, consisting of stage (1) CaP mineralized plaque, followed by stage (2) CaOx overgrowth into a stone. For the studies presented here, decellularized porcine kidneys were mineralized with CaP using polyaspartic acid or the protein osteopontin (OPN) to induce the PILP process and create biomimetic RP. Analysis of the PILP-mineralized tissues shows features that resemble the native plaques, including mineral spherules and collagen with intrafibrillar mineral. In contrast, the classical crystallization produced large apatitic spherulites, which is a very different morphology, but one which is also found in some stones. An alternative hypothesis regarding Randall's plaque, and if or when it becomes pathological, is discussed.

Biophysical aspects of biomineralization

During the process of endochondral bone formation, chondrocytes and osteoblasts mineralize their extracellular matrix (ECM) by promoting the synthesis of hydroxyapatite (HA) seed crystals in the sheltered interior of membrane-limited matrix vesicles (MVs). Several lipid and proteins present in the membrane of the MVs mediate the interactions of MVs with the ECM and regulate the initial mineral deposition and posterior propagation. Among the proteins of MV membranes, ion transporters control the availability of phosphate and calcium needed for initial HA deposition. Phosphatases (orphan phosphatase 1, ectonucleotide pyrophosphatase/phosphodiesterase 1 and tissue-nonspecific alkaline phosphatase) play a crucial role in controlling the inorganic pyrophosphate/inorganic phosphate ratio that allows MV-mediated initiation of mineralization. The lipidic microenvironment can help in the nucleation process of first crystals and also plays a crucial physiological role in the function of MV-associated enzymes and transporters (type III sodium-dependent phosphate transporters, annexins and Na⁺/K⁺ ATPase). The whole process is mediated and regulated by the action of several molecules and steps, which make the process complex and highly regulated. Liposomes and proteoliposomes, as models of biological membranes, facilitate the understanding of lipid-protein interactions with emphasis on the properties of physicochemical and biochemical processes. In this review, we discuss the use of proteoliposomes as multiple protein carrier systems intended to mimic the various functions of MVs during the initiation and propagation of mineral growth in the course of biomineralization. We focus on studies applying biophysical tools to characterize the biomimetic models in order to gain an understanding of the importance of lipid-protein and lipid-lipid interfaces throughout the process.

Osteopontin: its potential role in cancer of children and young adults

Objective: Osteopontin (OPN) is aglyco-phosphoprotein, involved in tissue remodeling, inflammation and boneresorption. In various adult neoplasms OPN was shown to correlate with cancer progression, invasiveness and metastasis. Aim: to define the role of OPN in malignancies of children and young adults. Material and methods: a structured PubMed and Google Scholar literature analysis based on reports published in English between I'1995 and XII'2015. Results: 14 studies (four on hematological malignancies, four on bone tumors, three on CNS tumors, two on dendritic proliferative diseases and one on renal tumors) were identified. Higher levels of serum and cerebro-spinal fluid OPN protein, and high expressions of OPN mRNA and SPP1 gene were present in more aggressive and advanced childhood malignancies. In children with acute lymphoblastic leukemia with CNS involvement and with atypical teratoid/rhabdoid tumor (AT/RT) and medulloblastoma, the serum and CSF OPN levels reflected tumor bulk and response to therapy, while in children with AT/RT and multisystem Langerhans cell histiocytosis with high-risk organs involvement, high OPN serum levels correlated with poorer survival. To the contrary, in osteosarcoma, high OPN mRNA and SPP1 gene expressions correlated with better survival and good response to chemotherapy. Conclusions: The literature review suggests that OPN may play important roles in the development and progression of selected cancers of children and young adults, including acute lymphoblastic leukemia, malignant gliomas, AT/RT and Langerhans cell histiocytosis. However, limited number of published studies prevents from definite concluding on the clinical utility of OPN as a marker of diagnosis, prognosis and treatment monitoring in these pediatric cancers. Further studies performed in more numerous groups of patients with particular types of cancers of children and young adults are warranted.

Competitive Adsorption of Plasma Proteins Using a Quartz Crystal Microbalance

Proteins that get adsorbed onto the surfaces of biomaterials immediately upon their implantation mediate the interactions between the material and the environment. This process, in which proteins in a complex mixture compete for adsorption sites on the surface, is determined by the physicochemical interactions at the interface. Competitive adsorption of bovine serum albumin (BSA), fibronectin (Fn), and collagen type I (Col I), sequentially and from mixtures, was investigated so as to understand the performances of different surfaces used in biomedical applications. A quartz crystal microbalance with dissipation was used to monitor the adsorption of these proteins onto two materials used in functional bone replacement, a titanium alloy (Ti6Al4V) and Ti6Al4V physisorbed with poly(sodium styrenesulfonate) [poly(NaSS)], and three controls, gold, poly(desaminotyrosyltyrosine ethyl ester carbonate) [poly(DTEc)], and polystyrene (PS). In experiments with individual proteins, the adsorption was the highest with Fn and Col I and the least with BSA. Also, protein adsorption was the highest on poly(NaSS) and Ti6Al4V and the least on poly(DTEc). In sequential adsorption experiments, protein exchange was observed in BSA + Fn, Fn + Col I, and BSA + Col I sequences but not in Fn + BSA and Col I + BSA because of the lower affinity of BSA to surfaces relative to Fn and Col I. Protein adsorption was the highest with Col I + Fn on hydrophobic surfaces. In experiments with protein mixtures, with BSA & Fn, Fn appears to be preferentially adsorbed; with Fn & Col I, both proteins were adsorbed, probably as multilayers; and with Col I & BSA, the total amount of protein was the highest, greater than that in sequential and individual adsorption of the two proteins, probably because of the formation of BSA and Col I complexes. Protein conformational changes induced by the adsorbing surfaces, protein-protein interactions, and affinities of proteins appear to be the important factors that govern competitive adsorption. The findings reported here will be useful in understanding the host response to surfaces used for implants.

Angiogenic growth factors interactome and drug discovery: The contribution of surface plasmon resonance

Angiogenesis is implicated in several pathological conditions, including cancer, and in regenerative processes, including the formation of collateral blood vessels after stroke. Physiological angiogenesis is the outcome of a fine balance between the action of angiogenic growth factors (AGFs) and anti-angiogenic molecules, while pathological angiogenesis occurs when this balance is pushed toward AGFs. AGFs interact with multiple endothelial cell (EC) surface receptors inducing cell proliferation, migration and proteases upregulation. On the contrary, free or extracellular matrix-associated molecules inhibit angiogenesis by sequestering AGFs (thus hampering EC stimulation) or by interacting with specific EC receptors inducing apoptosis or decreasing responsiveness to AGFs. Thus, angiogenesis results from an intricate network of interactions among pro- and anti-angiogenic molecules, EC receptors and various modulators. All these interactions represent targets for the development of pro- or anti-angiogenic therapies. These aims call for suitable technologies to study the countless interactions occurring during neovascularization. Surface plasmon resonance (SPR) is a label-free optical technique to study biomolecular interactions in real time. It has become the golden standard technology for interaction analysis in biomedical research, including angiogenesis. From a survey of the literature it emerges that SPR has already contributed substantially to the better understanding of the neovascularization process, laying the basis for the decoding of the angiogenesis "interactome" and the identification of "hub molecules" that may represent preferential targets for an efficacious modulation of angiogenesis. Here, the still unexploited full potential of SPR is enlightened, pointing to improvements in its use for a deeper understanding of the mechanisms of neovascularization and the identification of novel anti-angiogenic drugs.

Peptide linkers for the immobilization of bioactive molecules on biphasic calcium phosphate via a modular immobilization system

Herein we describe the use of peptide linkers to establish a nucleic acid-based immobilization system based on biphasic calcium phosphates (BCP), with which different molecules can be immobilized at the same time in defined ratios. It consists of single-stranded oligonucleotides, anchor strands (AS) which are immobilized to the surface and conjugates of complementary strands (CS) and bioactive molecules that bind to the AS via Watson-Crick base pairing. AS immobilization can be achieved on calcium phosphate ceramics using conjugates of AS and peptides that bind specifically to the ceramic. We successfully immobilized three different peptide sequences on BCP. Among them, we identified Stath (DpSpS EEK FLR RIG RFG, phosphoserine) as the most suitable one and further immobilized Stath-AS conjugates on BCP. This immobilized AS was able to hybridize with CS. Unspecific adsorption of oligonucleotides on the BCP surface was negligible. The stability of the system was proven by short term desorption experiments. The amounts of immobilized peptides, oligonucleotides and peptide-AS conjugates were determined by an enzymatic assay using biotin-streptavidin interactions, and were found to reach surface densities that are of therapeutic relevance (0.03 pmol cm(-2)).

Aldosterone-induced osteopontin expression in vascular smooth muscle cells involves MR, ERK, and p38 MAPK

Osteopontin (OPN) is known to be one of the cytokines that is involved in the vascular inflammation caused by aldosterone (Ald). Previous reports have shown that Ald increases OPN expression, and the mechanisms for this remain to be clarified. In this study, we investigated how Ald increases OPN expression in the vascular smooth muscle cells (VSMCs) of rats. Ald increased OPN expression time dependently as well as dose dependently. This increase was diminished by spironolactone, a mineralocorticoid receptor (MR) antagonist. PD98059, an inhibitor of p42/44 MAPK pathway, and SB203580, an inhibitor of p38 MAPK pathway, suppressed Ald-induced OPN expression and secretion in VSMCs. VSMCs migration stimulated by aldosterone required OPN expression. In conclusion, these data suggest that Ald-induced OPN expression in VSMC is mediated by MR and signaling cascades involving ERK and p38 MAPK. These molecules may represent therapeutic targets for the prevention of pathological vascular remodeling.

Functionalization of titanium based metallic biomaterials for implant applications

Surface immobilization with active functional molecules (AFMs) on a nano-scale is a main field in the current biomaterial research. The functionalization of a vast number of substances and molecules, ranging from inorganic calcium phosphates, peptides and proteins, has been investigated throughout recent decades. However, in vitro and in vivo results are heterogeneous. This may be attributed partially to the limits of the applied immobilization methods. Therefore, this paper highlights the advantages and limitations of the currently applied methods for the biological nano-functionalization of titanium-based biomaterial surfaces. The second part describes a newer immobilization system, using the nanomechanical fixation of at least partially single-stranded nucleic acids (NAs) into an anodic titanium oxide layer as an immobilization principle and their hybridization ability for the functionalization of the surface with active functional molecules conjugated to the respective complementary NA strands.

Biological nano-functionalization of titanium-based biomaterial surfaces: a flexible toolbox

Surface functionalization with bioactive molecules (BAMs) on a nanometre scale is a main field in current biomaterial research. The immobilization of a vast number of substances and molecules, ranging from inorganic calcium phosphate phases up to peptides and proteins, has been investigated throughout recent decades. However, in vitro and in vivo results are heterogeneous. This may be at least partially attributed to the limits of the applied immobilization methods. Therefore, this paper highlights, in the first part, advantages and limits of the currently applied methods for the biological nano-functionalization of titanium-based biomaterial surfaces. The second part describes a new immobilization system recently developed in our groups. It uses the nanomechanical fixation of at least partially single-stranded nucleic acids (NAs) into an anodic titanium oxide layer as an immobilization principle and their hybridization ability for the functionalization of the surface with BAMs conjugated to the respective complementary NA strands.

The role of osteopontin in inflammatory processes

Osteopontin (OPN) is a matricellular protein that mediates diverse biological functions. OPN is involved in normal physiological processes and is implicated in the pathogenesis of a variety of disease states, including atherosclerosis, glomerulonephritis, cancer, and several chronic inflammatory diseases. Through interactions with several integrins, OPN mediates cell migration, adhesion, and survival in many cell types. OPN also functions as a Th1 cytokine, promotes cell-mediated immune responses, and plays a role in chronic inflammatory and autoimmune diseases. Besides its function in inflammation, OPN is also a regulator of biomineralization and a potent inhibitor of vascular calcification.

Immobilization of oligonucleotides on titanium based materials by partial incorporation in anodic oxide layers

This paper describes the immobilization of bioactive molecules on titanium based surfaces through a combination of nano-mechanical fixation of nucleic acid anchor strands (ASs) by partial and regioselective incorporation within an anodic oxide layer and their hybridization with complementary strands (CSs) intended to be conjugated to bioactive molecules. We focus on the interaction between the substrate surface and the anchor strands, the integrity of ASs and their hybridization ability. The observed dependence of adsorption on pH suggests that initial interaction of terminally phosphorylated ASs with the substrate surface is mediated by electrostatic interaction. Using ASs labelled with (32)P at different termini, it could be shown that strand breaks occur, which are attributed (i) to the formation of reactive oxygen species during anodic polarization, (ii) the photocatalytic activity of the titanium oxide and (iii) drying effects. Damage to AS could be considerably reduced if the electrolyte contained 5 mol l(-1) ethanol, light was excluded during the experimental procedure, and the number of drying and rewetting steps was minimized. A total surface density of AS of 4.5 pmol cm(-2) was reached and could be hybridized to CS with an efficiency of up to 100%. A non-complementary strand (NS) bound with less than 0.5% of the amount of CS under similar conditions. Therefore, non-specific binding of CS is considered as negligible.

Covalently immobilized biosignal molecule materials for tissue engineering

Immobilization of biosignal molecules including growth factors and cytokines is important for developing biologically active materials which can contribute to tissue engineering as a component. The immobilization has more meanings than only immobilization of the enzyme in a bioreactor or ligand-receptor interactions, because the immobilized biosignal molecules work on cells which have very complex structures and functions. This review discusses recent progress in immobilization of biosignal molecules, including the mechanisms and design concepts.

Controlling the orientation of bone osteopontin via its specific binding with collagen I to modulate osteoblast adhesion

Osteopontin (OPN) is an important matricellular protein that modulates cell functions. It is potentially an excellent surface-coating component for engineered biomaterials. It is believed that in its preferred orientation and conformation on a surface, the functional domains of OPN such as the arginine-glycine-aspartic acid (RGD) motif will be presented to cells to the greatest extent. Previously, the authors demonstrated that OPN orientation could be modulated by surface charge. In this work, the authors attempt to control the orientation/conformation of bone OPN via its specific interactions with type I collagen. Surface plasmon resonance was used to confirm the specific binding between bone OPN and collagen I. A radiolabeled OPN adsorption assay was used to determine the amount of adsorbed OPN on tissue culture polystyrene (TCPS) surfaces with or without collagen I as an interlayer. An in vitro cell adhesion assay using osteoblast MC3T3-E1 was performed to compare the functionality of collagen-bound OPN and adsorbed OPN on TCPS. With the same amount of OPN on the surfaces, the number of cells adhered to collagen-bound OPN is significantly higher than to OPN alone on TCPS. A cell inhibition assay using soluble GRGDSP peptides showed that a higher GRGDSP concentration was needed to completely block osteoblast adhesion to collagen-bound OPN than to OPN directly on TCPS. Enhanced cell adhesion and higher blocking peptide concentration suggest that collagen-bound bone OPN has a preferable orientation/conformation for cell adhesion compared with OPN alone on TCPS. Thus, the specific binding of OPN to collagen I may naturally orient OPN, thus influencing osteoblast adhesion.

Mimicking cell-cell interactions at the biomaterial-cell interface for control of stem cell differentiation

The ability to regulate stem cell proliferation and differentiation has relevance in numerous medical applications, including medical devices, tissue engineering, and regenerative medicine. To control cellular behavior at the biomaterial or scaffold interface, many studies have employed surface modifications that mimic the extracellular matrix. Strikingly absent is the immobilization of cell-surface ligands to the biomaterial surface. One cell-to-cell signaling pathway that has been shown to regulate tissue development and stem cell fate is the Notch pathway. Recently, the Notch signaling pathway was identified as a key regulator of epithelial differentiation. Utilizing this knowledge, we applied an affinity immobilization scheme designed to attach and orient the Notch ligand, Jagged-1, in an active conformation on a biomaterial surface. When epithelial stem cells were plated on the bound ligand, the Notch/CBF-1 signaling pathway was stimulated and the cells upregulated both intermediate- and late-stage differentiation markers. In addition, the ligand promoted tight clustering and extensive stratification. Soluble Jagged-1 showed no Notch/CBF-1 signaling and very little, if any, cell differentiating activity. The high potency of bound Jagged-1 suggests that modification of a surface with a Notch ligand presents a powerful method to control stem cell differentiation at the cell-biomaterial interface.

Custom design of the cardiac microenvironment with biomaterials

Many strategies for repairing injured myocardium are under active investigation, with some early encouraging results. These strategies include cell therapies, despite little evidence of long-term survival of exogenous cells, and gene or protein therapies, often with incomplete control of locally-delivered dose of the factor. We propose that, ultimately, successful repair and regeneration strategies will require quantitative control of the myocardial microenvironment. This precision control can be engineered through designed biomaterials that provide quantitative adhesion, growth, or migration signals. Quantitative timed release of factors can be regulated by chemical design to direct cellular differentiation pathways such as angiogenesis and vascular maturation. Smart biomaterials respond to the local environment, such as protease activity or mechanical forces, with controlled release or activation. Most of these new biomaterials provide much greater flexibility for regenerating tissues ex vivo, but emerging technologies like self-assembling nanofibers can now establish intramyocardial cellular microenvironments by injection. This may allow percutaneous cardiac regeneration and repair approaches, or injectable-tissue engineering. Finally, materials can be made to multifunction by providing sequential signals with custom design of differential release kinetics for individual factors. Thus, new rationally-designed biomaterials no longer simply coexist with tissues, but can provide precision bioactive control of the microenvironment that may be required for cardiac regeneration and repair.