Functionalized hydrogel surfaces for the patterning of multiple biomolecules

Research Progress on Hydrogel-Elastomer Adhesion

Hydrophilic hydrogels exhibit good mechanical properties and biocompatibility, whereas hydrophobic elastomers show excellent stability, mechanical firmness, and waterproofing in various environments. Hydrogel-elastomer hybrid material devices show varied application prospects in the field of bioelectronics. In this paper, the research progress in hydrogel-elastomer adhesion in recent years, including the hydrogel-elastomer adhesion mechanism, adhesion method, and applications in the bioelectronics field, is reviewed. Finally, the research status of adhesion between hydrogels and elastomers is presented.

cAMP Bursts Control T Cell Directionality by Actomyosin Cytoskeleton Remodeling

T lymphocyte migration is an essential step to mounting an efficient immune response. The rapid and random motility of these cells which favors their sentinel role is conditioned by chemokines as well as by the physical environment. Morphological changes, underlaid by dynamic actin cytoskeleton remodeling, are observed throughout migration but especially when the cell modifies its trajectory. However, the signaling cascade regulating the directional changes remains largely unknown. Using dynamic cell imaging, we investigated in this paper the signaling pathways involved in T cell directionality. We monitored cyclic adenosine 3′-5′ monosphosphate (cAMP) variation concomitantly with actomyosin distribution upon T lymphocyte migration and highlighted the fact that spontaneous bursts in cAMP starting from the leading edge, are sufficient to promote actomyosin redistribution triggering trajectory modification. Although cAMP is commonly considered as an immunosuppressive factor, our results suggest that, when transient, it rather favors the exploratory behavior of T cells.

Quantifying cellular forces: Practical considerations of traction force microscopy for dermal fibroblasts

Traction force microscopy (TFM) is a well-established technique traditionally used by biophysicists to quantify the forces adherent biological cells exert on their microenvironment. As image processing software becomes increasingly user-friendly, TFM is being adopted by broader audiences to quantify contractility of (myo)fibroblasts. While many technical reviews of TFM's computational mechanics are available, this review focuses on practical experimental considerations for dermatology researchers new to cell mechanics and TFM who may wish to implement a higher throughput and less expensive alternative to collagen compaction assays. Here, we describe implementation of experimental methods, analysis using open-source software and troubleshooting of common issues to enable researchers to leverage TFM for their investigations into skin fibroblasts.

A simplified approach to control cell adherence on biologically derived in vitro cell culture scaffolds by direct UV-mediated RGD linkage

In this work, we present a method to fabricate a hyaluronic acid (HA) hydrogel with spatially controlled cell-adhesion properties based on photo-polymerisation cross-linking and functionalization. The approach utilises the same reaction pathway for both steps meaning that it is user-friendly and allows for adaptation at any stage during the fabrication process. Moreover, the process does not require any additional cross-linkers. The hydrogel is formed by UV-initiated radical addition reaction between acrylamide (Am) groups on the HA backbone. Cell adhesion is modulated by functionalising the adhesion peptide sequence arginine-glycine-aspartate onto the hydrogel surface via radical mediated thiol-ene reaction using the non-reacted Am groups. We show that 10 × 10 µm2 squares could be patterned with sharp features and a good resolution. The smallest area that could be patterned resulting in good cell adhesion was 25 × 25 µm2 squares, showing single-cell adhesion. Mouse brain endothelial cells adhered and remained in culture for up to 7 days on 100 × 100 µm2 square patterns. We see potential for this material combination for future use in novel organ-on-chip models and tissue engineering where the location of the cells is of importance and to further study endothelial cell biology.

Functional hydrogel coatings

Hydrogels—natural or synthetic polymer networks that swell in water—can be made mechanically, chemically and electrically compatible with living tissues. There has been intense research and development of hydrogels for medical applications since the invention of hydrogel contact lenses in 1960. More recently, functional hydrogel coatings with controlled thickness and tough adhesion have been achieved on various substrates. Hydrogel-coated substrates combine the advantages of hydrogels, such as lubricity, biocompatibility and anti-biofouling properties, with the advantages of substrates, such as stiffness, toughness and strength. In this review, we focus on three aspects of functional hydrogel coatings: (i) applications and functions enabled by hydrogel coatings, (ii) methods of coating various substrates with different functional hydrogels with tough adhesion, and (iii) tests to evaluate the adhesion between functional hydrogel coatings and substrates. Conclusions and outlook are given at the end of this review.

Structure–property relations of amphiphilic poly(furfuryl glycidyl ether)-block-poly(ethylene glycol) macromonomers at the air–water interface

Structure–property relations of poly(furfuryl glycidyl ether)-block-poly(ethylene glycol) macromonomers at the air–water interface are studied with a Langmuir film balance.

Hydrogels with multiple clickable anchor points: synthesis and characterization of poly(furfuryl glycidyl ether)-block-poly(ethylene glycol) macromonomers

Functional polyacrylamide hydrogels containing multiple furfuryl anchor points for Diels–Alder reactions were prepared employing new macromonomers.

Different TCR-induced T lymphocyte responses are potentiated by stiffness with variable sensitivity

T cells are mechanosensitive but the effect of stiffness on their functions is still debated. We characterize herein how human primary CD4⁺ T cell functions are affected by stiffness within the physiological Young’s modulus range of 0.5 kPa to 100 kPa. Stiffness modulates T lymphocyte migration and morphological changes induced by TCR/CD3 triggering. Stiffness also increases TCR-induced immune system, metabolism and cell-cycle-related genes. Yet, upon TCR/CD3 stimulation, while cytokine production increases within a wide range of stiffness, from hundreds of Pa to hundreds of kPa, T cell metabolic properties and cell cycle progression are only increased by the highest stiffness tested (100 kPa). Finally, mechanical properties of adherent antigen-presenting cells modulate cytokine production by T cells. Together, these results reveal that T cells discriminate between the wide range of stiffness values found in the body and adapt their responses accordingly.

DOI:http://dx.doi.org/10.7554/eLife.23190.001

Our immune system contains many cells that play various roles in defending the body against infection, cancer and other threats. For example, T cells constantly patrol the body ready to detect and respond to dangers. They do so by gathering cues from their surroundings, which can be specific chemical signals or physical properties such as the stiffness of tissues. Once the T cells are active they respond in several different ways including releasing hormones and dividing to produce more T cells.

Tissue stiffness varies considerably between different organs. Furthermore, disease can lead to changes in tissue stiffness. For example, tissues become more rigid when they are inflamed. The stiffness and other physical properties of the surfaces that T cells interact with affect how the cells respond when they detect a threat, but few details are known about exactly how these cues tune T cell responses. Saitakis et al. studied how human T cells respond to artificial surfaces of varying stiffness that mimic the range found in the body.

The experiments show that T cells that interact with stiff surfaces become more active than T cells that interact with softer surfaces. However, some responses are more sensitive to the stiffness of the surface than others. For example, the ability of the T cells to release hormones was affected by the whole range of stiffnesses tested in the experiments, whereas only very stiff surfaces stimulated the T cells to divide.

These findings show that T cells can detect the stiffness of surfaces in the body and use this to adapt how they respond to threats. Future challenges will be to find out how T cells sense the physical properties of their surroundings and investigate whether cell and tissue stiffness affects immune responses in the body. This will help us to understand how T cells fight infections and other threats, and could be used to develop new ways of boosting these cells to fight cancer and other diseases.

DOI:http://dx.doi.org/10.7554/eLife.23190.002

Improved PNIPAAm-Hydrogel Photopatterning by Process Optimisation with Respect to UV Light Sources and Oxygen Content

Poly-N-isopropylacrylamide (PNIPAAm) hydrogels, known for their sensor and actuator capabilities, can be photolithographically structured for microsystem applications. For usage in microsystems, the preparation, and hence the characteristics, of these hydrogels (e.g., degree of swelling, size, cooperative diffusion coefficient) are key features, and have to be as reproducible as possible. A common method of hydrogel fabrication is free radical polymerisation using a thermally-initiated system or a photoinitiator system. Due to the reaction quenching by oxygen, the polymer solution has to be rinsed with protective inert gases like nitrogen or argon before the polymerisation process. In this paper, we focus on the preparation reproducibility of PNIPAAm hydrogels under different conditions, and investigate the influence of oxygen and the UV light source during the photopolymerisation process. The flushing of the polymer solution with inert gas is not sufficient for photostructuring approaches, so a glove box preparation resulting in better quality. Moreover, the usage of a wide-band UV light source yields higher reproducibility to the photostructuring process compared to a narrow-band UV source.

Portable Micropatterns of Neuronal Cells Supported by Thin Hydrogel Films

A grid micropattern of neuronal cells was formed on a free-standing collagen film (35 μm thickness) by directing migration and extension of neurons along a Matrigel pattern previously prepared on the film by the microcontact printing method. The neurons migrated to reach the nodes on the grid pattern and extended neurites to bridge cell bodies at the nodes. The resulting neuronal micropattern on the collagen film containing culture medium can be handled and deformed with tweezers with maintenance of physiological activity of the neurons, as examined by response of cytosolic Ca²⁺ concentration to a dose of bradykinin. This portability is the unique advantage of the present system that will open novel possibility of cellular engineering including the on-demand combination with analytical devices. The repetitive lamination of the film on a microelectrode chip was demonstrated for local electrical stimulation of a specific part of the grid micropattern of neurons, showing Ca²⁺ wave propagation along the neurites. The molecular permeability is the further advantage of the free-standing hydrogel substrate, which allows external supply of nutrients and dosing with chemical stimulants through the film even under rolled and laminated conditions.

Micropatterned sensing hydrogels integrated with reconfigurable microfluidics for detecting protease release from cells

Matrix metalloproteinases (MMPs) play a central role in the breakdown of the extracellular matrix and are typically upregulated in cancer cells. The goal of the present study is to develop microwells suitable for capture of cells and detection of cell-secreted proteases. Hydrogel microwells comprised of poly(ethylene glycol) (PEG) were photopatterned on glass and modified with ligands to promote cell adhesion. To sense protease release, peptides cleavable by MMP9 were designed to contain a donor/acceptor FRET pair (FITC and DABCYL). These sensing molecules were incorporated into the walls of the hydrogel wells to enable a detection scheme where cells captured within the wells secreted protease molecules which diffused into the gel, cleaved the peptide, and caused a fluorescence signal to come on. By challenging sensing hydrogel microstructures to known concentrations of recombinant MMP9, the limit of detection was determined to be 0.625 nM with a linear range extending to 40 nM. To enhance sensitivity and to limit cross-talk between adjacent sensing sites, microwell arrays containing small groups (∼20 cells/well) of lymphoma cells were integrated into reconfigurable PDMS microfluidic devices. Using this combination of sensing hydrogel microwells and reconfigurable microfluidics, detection of MMP9 release from as few as 11 cells was demonstrated. Smart hydrogel microstructures capable of sequestering small groups of cells and sensing cell function have multiple applications ranging from diagnostics to cell/tissue engineering. Further development of this technology will include single-cell analysis and function-based cell sorting capabilities.

Functionalized PEG hydrogels through reactive dip-coating for the formation of immunoactive barriers

Influencing the host immune system via implantable cell-delivery devices has the potential to reduce inflammation at the transplant site and increase the likelihood of tissue acceptance. Towards this goal, an enzymatically-initiated, dip-coating technique is adapted to fabricate conformal hydrogel layers and to create immunoactive polymer coatings on cell-laden poly(ethylene glycol) (PEG) hydrogels. Glucose oxidase (GOx)-initiated dip coatings enable the rapid formation of uniform, PEG-based coatings on the surfaces of PEG hydrogels, with thicknesses up to 500 μm where the thickness is proportional to the reaction time. Biofunctional coatings were fabricated by thiolating biomolecules that were subsequently covalently incorporated into the coating layer via thiol-acrylate copolymerization. The presence of these proteins was verified via fluorescent confocal microscopy and a modified ELISA, which indicated IgG concentrations as high as 13 ± 1 ng/coated cm² were achievable. Anti-Fas antibody, known to induce T cell apoptosis, was incorporated into coatings, with or without the addition of ICAM-1 to promote T cell interaction with the functionalized coating. Jurkat T cells were seeded atop functionalized coatings and the induction of apoptosis was measured as an indicator of coating bioactivity. After 48 h of interaction with the functionalized coatings, 61 ± 9% of all cells were either apoptotic or dead, compared to only 18 ± 5% of T cells on non-functionalized coatings. Finally, the cytocompatibility of the surface-initiated GOx coating process was confirmed by modifying gels with either encapsulated β-cells or 3T3 fibroblasts within a gel that contained a PEG methacrylate coating.

Modulation of cultured neural networks using neurotrophin release from hydrogel-coated microelectrode arrays

Polyacrylamide and poly(ethylene glycol) diacrylate hydrogels were synthesized and characterized for use as drug release and substrates for neuron cell culture. Protein release kinetics was determined by incorporating bovine serum albumin (BSA) into hydrogels during polymerization. To determine if hydrogel incorporation and release affect bioactivity, alkaline phosphatase was incorporated into hydrogels and a released enzyme activity determined using the fluorescence-based ELF-97 assay. Hydrogels were then used to deliver a brain-derived neurotrophic factor (BDNF) from hydrogels polymerized over planar microelectrode arrays (MEAs). Primary hippocampal neurons were cultured on both control and neurotrophin-containing hydrogel-coated MEAs. The effect of released BDNF on neurite length and process arborization was investigated using automated image analysis. An increased spontaneous activity as a response to the released BDNF was recorded from the neurons cultured on the top of hydrogel layers. These results demonstrate that proteins of biological interest can be incorporated into hydrogels to modulate development and function of cultured neural networks. These results also set the stage for development of hydrogel-coated neural prosthetic devices for local delivery of various biologically active molecules.

Directed cell growth on protein-functionalized hydrogel surfaces

Biochemical surface modification has been used to direct cell attachment and growth on a biocompatible gel surface. Acrylamide-based hydrogels were photo-polymerized in the presence of an acroyl-streptavidin monomer to create planar, functionalized surfaces capable of binding biotin-labelled proteins. Soft protein lithography (microcontact printing) of proteins was used to transfer the biotinylated extracellular matrix proteins, fibronectin and laminin, and the laminin peptide biotin-IKVAV, onto modified surfaces. As a biological assay, we plated LRM55 astroglioma and primary rat hippocampal neurons on patterned hydrogels. We found both cell types to selectively adhere to areas patterned with biotin-conjugated proteins. Fluorescence and bright-field modes of microscopy were used to assess cell attachment and cell morphology on modified surfaces. LRM55 cells were found to attach to protein-stamped regions of the hydrogel only. Neurons exhibited significant neurite extension after 72h in vitro, and remained viable on protein-stamped areas for more than 4 weeks. Patterned neurons developed functionally active synapses, as measured by uptake of the dye FM1-43FX. Results from this study suggest that hydrogel surfaces can be patterned with multiple proteins to direct cell growth and attachment.