Effect of a continuously applied compressive pressure on mouse osteoblast-like cells (MC3T3-E1) in vitro

Connexin 43 hemichannels and prostaglandin E2 release in anabolic function of the skeletal tissue to mechanical stimulation

Bone adapts to changes in the physical environment by modulating remodeling through bone resorption and formation to maintain optimal bone mass. As the most abundant connexin subtype in bone tissue, connexin 43 (Cx43)-forming hemichannels are highly responsive to mechanical stimulation by permitting the exchange of small molecules (<1.2 kDa) between bone cells and the extracellular environment. Upon mechanical stimulation, Cx43 hemichannels facilitate the release of prostaglandins E2 (PGE2), a vital bone anabolic factor from osteocytes. Although most bone cells are involved in mechanosensing, osteocytes are the principal mechanosensitive cells, and PGE2 biosynthesis is greatly enhanced by mechanical stimulation. Mechanical stimulation-induced PGE2 released from osteocytic Cx43 hemichannels acts as autocrine effects that promote β-catenin nuclear accumulation, Cx43 expression, gap junction function, and protects osteocytes against glucocorticoid-induced osteoporosis in cultured osteocytes. In vivo, Cx43 hemichannels with PGE2 release promote bone formation and anabolism in response to mechanical loading. This review summarizes current in vitro and in vivo understanding of Cx43 hemichannels and extracellular PGE2 release, and their roles in bone function and mechanical responses. Cx43 hemichannels could be a significant potential new therapeutic target for treating bone loss and osteoporosis.

Effect of platelet-rich fibrin membrane on gingival crevicular fluid alkaline phosphatase levels in patients undergoing periodontally accelerated osteogenic orthodontics

Background

The present study is aimed to compare the osteoblastic activity in periodontally accelerated osteogenic orthodontics (PAOO) with and without the platelet-rich fibrin (PRF) membrane by evaluating the gingival crevicular fluid (GCF), alkaline phosphate (ALP) levels and also to explore the efficiency of PRF membrane in terms of healing.

Methods

A split-mouth randomized controlled trial, which comprised 16 sites, was randomly treated with PAOO + PRF membrane and PAOO alone. The primary outcome was to analyze the GCF ALP levels at baseline, 3rd, week, 5th week (2 weeks after surgery, 1 h before and after activation), 7th week (4 weeks after surgery), and 9th week (6 weeks after surgery). The clinical parameters (plaque index [PI], gingival index [GI], bleeding index [BI]) were assessed at baseline, 3rd week, 15th week, and 27th week. Healing index was recorded at 4th week (1 week after surgery), 5th week (2 weeks after surgery), and 7th week (4 weeks after surgery).

Results

There was a statistically significant increase in GCF ALP levels (p < 0.05) in the test site (PAOO with PRF membrane) 2 weeks post-surgically compared to the control site. Improvement in the clinical measures (PI, GI, BI) was statistically significant at all time intervals. Adjunctive use of PRF resulted in statistically significant early healing in the first postoperative week compared to the control site (p < 0.05).

Conclusions

Within the limitations of this split-mouth study, PRF membrane showed significant osteoblastic activity in the 5th week (2 weeks after PAOO) with the increased GCF ALP levels and accelerated healing in the 1st week after PAOO. They also maintained post-orthodontic stability until 18 months.

The yellow brick road to nuclear membrane mechanotransduction

The nuclear membrane may function as a mechanosensory surface alongside the plasma membrane. In this Review, we discuss how this idea emerged, where it currently stands, and point out possible implications, without any claim of comprehensiveness.

Effects of Mechanical Stress Stimulation on Function and Expression Mechanism of Osteoblasts

Osteoclasts and osteoblasts play a major role in bone tissue homeostasis. The homeostasis and integrity of bone tissue are maintained by ensuring a balance between osteoclastic and osteogenic activities. The remodeling of bone tissue is a continuous ongoing process. Osteoclasts mainly play a role in bone resorption, whereas osteoblasts are mainly involved in bone remodeling processes, such as bone cell formation, mineralization, and secretion. These cell types balance and restrict each other to maintain bone tissue metabolism. Bone tissue is very sensitive to mechanical stress stimulation. Unloading and loading of mechanical stress are closely related to the differentiation and formation of osteoclasts and bone resorption function as well as the differentiation and formation of osteoblasts and bone formation function. Consequently, mechanical stress exerts an important influence on the bone microenvironment and bone metabolism. This review focuses on the effects of different forms of mechanical stress stimulation (including gravity, continuously compressive pressure, tensile strain, and fluid shear stress) on osteoclast and osteoblast function and expression mechanism. This article highlights the involvement of osteoclasts and osteoblasts in activating different mechanical transduction pathways and reports changings in their differentiation, formation, and functional mechanism induced by the application of different types of mechanical stress to bone tissue. This review could provide new ideas for further microscopic studies of bone health, disease, and tissue damage reconstruction.

Effect of Mechanical Strain on Cells Involved in Fracture Healing

Secondary fracture healing is a complex multi‐stage process in which the mechanical environment plays a key role. The use of an appropriate mechanical stimulation such as strain is conducive to tissue formation between fracture ends, thus aiding the healing process. However, if the strain is too large or too small, the biological behavior of the cells involved in bone healing will be affected, resulting in non‐union or delayed healing. In this review, we summarize the current state of knowledge regarding the effect of strain on cells that play a role in the fracture‐healing process. Overall, the related literature suggests that selection of an adequate strain promotes fracture healing through the stimulation of angiogenesis and osteogenesis, along with inhibition of osteoclast differentiation and bone resorption. However, standardized methods for the application of mechanical stimulation are lacking, and a unified consensus on the mechanism by which strain promotes cell differentiation has not yet been reached. These issues, therefore, deserve further investigation.

A mathematical multiscale model of bone remodeling, accounting for pore space-specific mechanosensation

While bone tissue is a hierarchically organized material, mathematical formulations of bone remodeling are often defined on the level of a millimeter-sized representative volume element (RVE), "smeared" over all types of bone microstructures seen at lower observation scales. Thus, there is no explicit consideration of the fact that the biological cells and biochemical factors driving bone remodeling are actually located in differently sized pore spaces: active osteoblasts and osteoclasts can be found in the vascular pores, whereas the lacunar pores host osteocytes - bone cells originating from former osteoblasts which were then "buried" in newly deposited extracellular bone matrix. We here propose a mathematical description which considers size and shape of the pore spaces where the biological and biochemical events take place. In particular, a previously published systems biology formulation, accounting for biochemical regulatory mechanisms such as the rank-rankl-opg pathway, is cast into a multiscale framework coupled to a poromicromechanical model. The latter gives access to the vascular and lacunar pore pressures arising from macroscopic loading. Extensive experimental data on the biological consequences of this loading strongly suggest that the aforementioned pore pressures, together with the loading frequency, are essential drivers of bone remodeling. The novel approach presented here allows for satisfactory simulation of the evolution of bone tissue under various loading conditions, and for different species; including scenarios such as mechanical dis- and overuse of murine and human bone, or in osteocyte-free bone.

Effects of Cyclic Tensile Forces on the Expression of Vascular Endothelial Growth Factor (VEGF) and Macrophage-colony-stimulating Factor (M-CSF) in Murine Osteoblastic MC3T3-E1 Cells

It has been reported that vascular endothelial growth factor (VEGF), expressed by osteoblasts, can induce osteoclast recruitment and thus affects bone remodeling. The purpose of this study was to investigate the effects of cyclic tensile forces on the expression of VEGF and macrophage-colony-stimulating factor (M-CSF) in osteoblastic MC3T3-E1 cells. VEGF and M-CSF gene expression and protein concentration were determined by real-time PCR and enzyme-linked immunoassay. The expression of VEGF and M-CSF mRNA in the experimental group was higher than in the control group. The increase in the concentration of VEGF and M-CSF protein in the experimental group was time-dependent. Moreover, gadolinium (an S-A channel inhibitor), but not nifedipine (L-Type Ca2+ channel blocker), treatment reduced the concentration of VEGF and M-CSF mRNA and protein in the experimental groups. These findings suggest that cyclic tensile forces increase the expression of VEGF and M-CSF in osteoblastic MC3T3-E1 cells via a stretch-activated channel (S-A channel).

Hydrostatic Compress Force Enhances the Viability and Decreases the Apoptosis of Condylar Chondrocytes through Integrin-FAK-ERK/PI3K Pathway

Reduced mechanical stimuli in many pathological cases, such as hemimastication and limited masticatory movements, can significantly affect the metabolic activity of mandibular condylar chondrocytes and the growth of mandibles. However, the molecular mechanisms for these phenomena remain unclear. In this study, we hypothesized that integrin-focal adhesion kinase (FAK)-ERK (extracellular signal-regulated kinase)/PI3K (phosphatidylinositol-3-kinase) signaling pathway mediated the cellular response of condylar chondrocytes to mechanical loading. Primary condylar chondrocytes were exposed to hydrostatic compressive forces (HCFs) of different magnitudes (0, 50, 100, 150, 200, and 250 kPa) for 2 h. We measured the viability, morphology, and apoptosis of the chondrocytes with different treatments as well as the gene, protein expression, and phosphorylation of mechanosensitivity-related molecules, such as integrin α2, integrin α5, integrin β1, FAK, ERK, and PI3K. HCFs could significantly increase the viability and surface area of condylar chondrocytes and decrease their apoptosis in a dose-dependent manner. HCF of 250 kPa resulted in a 1.51 ± 0.02-fold increase of cell viability and reduced the ratio of apoptotic cells from 18.10% ± 0.56% to 7.30% ± 1.43%. HCFs could significantly enhance the mRNA and protein expression of integrin α2, integrin α5, and integrin β1 in a dose-dependent manner, but not ERK1, ERK2, or PI3K. Instead, HCF could significantly increase phosphorylation levels of FAK, ERK1/2, and PI3K in a dose-dependent manner. Cilengitide, the potent integrin inhibitor, could dose-dependently block such effects of HCFs. HCFs enhances the viability and decreases the apoptosis of condylar chondrocytes through the integrin-FAK-ERK/PI3K pathway.

Influence of mechanical compression on human periodontal ligament fibroblasts and osteoblasts

OBJECTIVES

The aim of this study was to investigate and compare the changes in human periodontal ligament fibroblasts (HPdLFs) and osteoblasts (HOBs) after the application of compressive force (CF) at two different strengths in vitro.

MATERIALS AND METHODS

HPdLF and HOB were exposed to CF with various strengths (5 and 10 %) using a Flexercell Compression Unit for 12 h in vitro. Viability was detected via 3-(4.5-dimethylthiazol-2-yl)-2.5-diphenyltetrazolium bromide (MTT) and apoptosis rate by transferase dUTP nick end labeling (TUNEL) assay. The gene expression of alkaline phosphatase (ALP), osteocalcin (OCN), osteoprotegerin (OPG), and receptor activator of NF-κB ligand (RANKL) was analyzed using reverse transcriptase polymerase chain reaction (RT-PCR). Osteopontin (OPN), matrix metalloproteinase-8 (MMP-8), and tissue inhibition of metalloproteinase-1 (TIMP-1) were quantified by an ELISA.

RESULTS

Ten percent CF decreased viability, particularly in HOBs, but did not induce increased apoptosis. ALP gene expression increased the most after 5 % CF in HPdLFs and after 10 % CF in HOB. OCN was not affected by CF in either cell line. The highest RANKL/OPG ratio was measured after 5 % CF in both cell lines. OPN was upregulated in HOB by 5 %. HPdLFs showed an upregulation of MMP-8-synthesis and an increased MMP-8/TIMP-1 ratio.

CONCLUSIONS

HOBs have a greater effect on bone remodeling through the upregulation of OPN, whereas HPdLFs facilitate orthodontic tooth movement by influencing the extracellular matrix via the MMP-8/TIMP-1 ratio.

CLINICAL RELEVANCE

High CF in orthodontics should be avoided to prevent tissue damage, whereas moderate CF enables active tissue remodeling and tooth movement.

Poromicromechanics reveals that physiological bone strains induce osteocyte-stimulating lacunar pressure

Mechanical loads which are macroscopically acting onto bony organs, are known to influence the activities of biological cells located in the pore spaces of bone, in particular so the signaling and production processes mediated by osteocytes. The exact mechanisms by which osteocytes are actually able to “feel” the mechanical loading and changes thereof, has been the subject of numerous studies, and, while several hypotheses have been brought forth over time, this topic has remained a matter of debate. Relaxation times reported in a recent experimental study of Gardinier et al. (Bone 46(4):1075–1081, 2010) strongly suggest that the lacunar pores are likely to experience, during typical physiological load cycles, not only fluid transport, but also undrained conditions. The latter entail the buildup of lacunar pore pressures, which we here quantify by means of a thorough multiscale modeling approach. In particular, the proposed model is based on classical poroelasticity theory, and able to account for multiple pore spaces. First, the model reveals distinct nonlinear dependencies of the resulting lacunar (and vascular) pore pressures on the underlying bone composition, highlighting the importance of a rigorous multiscale approach for appropriate computation of the aforementioned pore pressures. Then, the derived equations are evaluated for macroscopic (uniaxial as well as hydrostatic) mechanical loading of physiological magnitude. The resulting model-predicted pore pressures agree very well with the pressures that have been revealed, by means of in vitro studies, to be of adequate magnitude for modulating the responses of biological cells, including osteocytes. This underlines that osteocytes may respond to many types of loading stimuli at the same time, in particular so to fluid flow and hydrostatic pressure.

Mechanical dynamics in live cells and fluorescence-based force/tension sensors

Three signaling systems play the fundamental roles in modulating cell activities: chemical, electrical, and mechanical. While the former two are well studied, the mechanical signaling system is still elusive because of the lack of methods to measure structural forces in real time at cellular and subcellular levels. Indeed, almost all biological processes are responsive to modulation by mechanical forces that trigger dispersive downstream electrical and biochemical pathways. Communication among the three systems is essential to make cells and tissues receptive to environmental changes. Cells have evolved many sophisticated mechanisms for the generation, perception and transduction of mechanical forces, including motor proteins and mechanosensors. In this review, we introduce some background information about mechanical dynamics in live cells, including the ubiquitous mechanical activity, various types of mechanical stimuli exerted on cells and the different mechanosensors. We also summarize recent results obtained using genetically encoded FRET (fluorescence resonance energy transfer)-based force/tension sensors; a new technique used to measure mechanical forces in structural proteins. The sensors have been incorporated into many specific structural proteins and have measured the force gradients in real time within live cells, tissues, and animals.

Mechanical force enhanced bony formation in defect implanted with calcium sulphate cement

To improve the osteogenic property of bone repairing materials and to accelerate bone healing are major tasks in bone biomaterials research. The objective of this study was to investigate if the mechanical force could be used to accelerate bone formation in a bony defect in vivo. The calcium sulfate cement was implanted into the left distal femoral epiphyses surgically in 16 rats. The half of rats were subjected to external mechanical force via treadmill exercise, the exercise started at day 7 postoperatively for 30 consecutive days and at a constant speed 8 m·min⁻¹ for 45 min·day⁻¹, while the rest served as a control. The rats were scanned four times longitudinally after surgery using microcomputed tomography and newly formed bone was evaluated. After sacrificing, the femurs had biomechanical test of three-point bending and histological analysis. The results showed that bone healing under mechanical force were better than the control with residual defect areas of 0.64±0.19 mm² and 1.78±0.39 mm² (P<0.001), and the ultimate loads to failure under mechanical force were 69.56±4.74 N, stronger than the control with ultimate loads to failure of 59.17±7.48 N (P=0.039). This suggests that the mechanical force might be used to improve new bone formation and potentially offer a clinical strategy to accelerate bone healing.

Continuous cyclic stretch induces osteoblast alignment and formation of anisotropic collagen fiber matrix

Bone tissue geometry shows a highly anisotropic architecture, which is derived from its genetic regulation and mechanical environment. Osteoblasts are responsible not only for bone formation, through the secretion of collagen type I, but also for sensing the mechanical stimuli due to bone surface strain. Mechanotransduction by osteoblasts is therefore considered one of the regulators of anisotropic bone tissue morphogenesis. The orientation of osteoblasts and the secreted collagen matrix was successfully regulated by applying a continuous mechanical stress on osteoblasts for a long period. Under a continuous cyclic stretch of 4% magnitude at a rate of 2 cycles min(-1), osteoblasts reoriented their actin stress fibers in the direction that minimizes the strain applied to them. Extended culture of up to 2weeks resulted in the formation of collagen fibers in the extracellular spaces, and the preferred orientation of these fibers was parallel to the direction of cell elongation. To the best of our knowledge, this is the first report to establish anisotropic bone matrix architecture following the alignment of osteoblasts under mechanical stimuli for long-term cultivation.

Effect of compressive force on human osteoblast-like cells and bone remodelling: an in vitro study

OBJECTIVE

The aim of this study was to determine the effect of continuous compressive force (CF) on expression by human alveolar bone-derived osteoblasts (HOBs) of some specific molecules involved in bone remodelling.

DESIGN

HOBs were cultured with or without CF (control, 2.0, 4.0gcm(-2)) for 1, 3 and 7 days. Expression of alkaline phosphatase (ALP), type I collagen (Col I), osteopontin (OPN), osteocalcin (OCN), transcription factor Runx2, receptor activator of nuclear factor κB ligand (RANKL), osteoprotegerin (OPG) and prostaglandin E2 (PGE2) was analysed by real-time-polymerase chain reaction (RT-PCR), enzyme-linked immunosorbent assay (ELISA) and/or immunostaining.

RESULTS

The results revealed that CF upregulated ALP and Col I expression at both messenger RNA (mRNA) and protein levels but did not affect expression of OPN and OCN mRNA. Runx2 mRNA was inhibited by CF, which also altered the expression of molecules involved in osteoclastogenesis, by enhancing RANKL expression and suppressing OPG expression. At 4.0gcm(-2) of CF, the expression of RANKL and PGE2 was significantly upregulated.

CONCLUSION

The results suggest that initial application of CF on HOBs can simultaneously affect expression of markers related to both osteogenesis and osteoclastogenesis.

Mechanical regulation of signaling pathways in bone

A wide range of cell types depend on mechanically induced signals to enable appropriate physiological responses. The skeleton is particularly dependent on mechanical information to guide the resident cell population towards adaptation, maintenance and repair. Research at the organ, tissue, cell and molecular levels has improved our understanding of how the skeleton can recognize the functional environment, and how these challenges are translated into cellular information that can site-specifically alter phenotype. This review first considers those cells within the skeleton that are responsive to mechanical signals, including osteoblasts, osteoclasts, osteocytes and osteoprogenitors. This is discussed in light of a range of experimental approaches that can vary parameters such as strain, fluid shear stress, and pressure. The identity of mechanoreceptor candidates is approached, with consideration of integrins, pericellular tethers, focal adhesions, ion channels, cadherins, connexins, and the plasma membrane including caveolar and non-caveolar lipid rafts and their influence on integral signaling protein interactions. Several mechanically regulated intracellular signaling cascades are detailed including activation of kinases (Akt, MAPK, FAK), β-catenin, GTPases, and calcium signaling events. While the interaction of bone cells with their mechanical environment is complex, an understanding of mechanical regulation of bone signaling is crucial to understanding bone physiology, the etiology of diseases such as osteoporosis, and to the development of interventions to improve bone strength.

Pneumatic pressure bioreactor for cyclic hydrostatic stress application: mechanobiology effects on periodontal ligament cells

A bioreactor system was developed to provide high-amplitude cyclic hydrostatic compressive stress (cHSC) using compressed air mixed commercially as needed to create partial pressures of oxygen and carbon dioxide appropriate for the cells under investigation. Operating pressures as high as 300 psi are achievable in this system at cyclic speeds of up to 0.2 Hz. In this study, ligamentous fibroblasts from human periodontal ligaments (n = 6) were compressed on two consecutive days at 150 psi for 3 h each day, and the mRNA for families of extracellular matrix protein and protease isoforms was evaluated by real-time PCR array. Several integrins were significantly upregulated, most notably alpha-3 (6.4-fold), as was SPG7 (12.1-fold). Among the collagens, Col8a1 was highly upregulated at 53.5-fold, with Col6a1, Col6a2, and Col7a1 also significantly upregulated 4.4- to 8.5-fold. MMP-1 was the most affected at 122.9-fold upregulation. MMP-14 likewise increased 17.8-fold with slight reductions for the gelatinases and a significant increase of TIMP-2 at 5.8-fold. The development of this bioreactor system and its utility in characterizing periodontal ligament fibroblast mechanobiology in intermediate-term testing hold promise for better simulating the conditions of the musculoskeletal system and the large cyclic compressive stresses joints may experience in gait, exertion, and mastication.

Gap Junctions and Biophysical Regulation of Bone Cells

Communication between osteoblasts, osteoclasts, and osteocytes is integral to their ability to build and maintain the skeletal system and respond to physical signals. Various physiological mechanisms, including nerve communication, hormones, and cytokines, play an important role in this process. More recently, the important role of direct, cell-cell communication via gap junctions has been established. In this review, we demonstrate the integral role of gap junctional intercellular communication (GJIC) in skeletal physiology and bone cell mechanosensing.

Effect of stretching stress on gene transcription related to early-phase differentiation in rat periodontal ligament cells

Mechanical stress such as occlusal and orthodontic loading has been suggested to induce a homeostatic and regenerative response in periodontal ligament (PDL), but the underlying mechanism remains to be clarified. The purpose of this study was to investigate expression of mRNAs encoding proteins involved in osteogenesis and homeostasis by PDL cells following application of tensile stress and characterize the relationship between such expression and the regenerative and homeostatic functions of the PDL. PDL cells were obtained from rats and stretched by 9% or 18% at a frequency of 6 cycles/min for 12 hr to 5 days in a FX-4000T&trade; culture system. After stretching, expression of mRNAs encoding collagen type I (Col-I), alkaline phosphatase (ALP), bone morphogenetic protein-2 (BMP-2), bone morphogenetic protein-4 (BMP-4), heat shock protein 70 (HSP70) and basic fibroblast growth factor (bFGF) was investigated. The highest levels of Col-I, ALP and BMP-2 mRNA expression occurred at 12 hr, while those of BMP-4 and HSP70 occurred at 1 day and 5 days, respectively. Expression levels of Col-I, ALP, BMP-2, BMP-4 and HSP70 increased magnitude-dependently with stretching force in the stretching groups. In contrast, expression of bFGF mRNA showed statistically significant reduction in both stretching groups, with the largest reduction seen in the 9% stretching group (p<0.01). These results suggest that stretching of PDL cells provokes significant increases in expression of factors promoting osteogenic differentiation and HSP70, which protects PDL cells undergoing mechanical stress and contributes to maintenance of PDL homeostasis. However, expression of bFGF was restrained. Reduced expression of bFGF mRNA suggested that there was an optimum magnitude of stretching force for increasing expression.

An in-vitro traumatic model to evaluate the response of myelinated cultures to sustained hydrostatic compression injury

While a variety of in-vitro models have been employed to investigate the response of load-bearing tissues to hydrostatic pressure, long-term studies are limited by the need to provide for adequate gas exchange during pressurization. Applying compression in vitro may alter the equilibrium of the system and thereby disrupt the gas exchange kinetics. To address this, several sophisticated compression chamber designs have been developed. However, these systems are limited in the magnitude of pressure that can be applied and may require frequent media changes, thereby eliminating critical autocrine and paracrine signaling factors. To better isolate the cellular response to long-term compression, we created a model that features continuous gas flow through the chamber during pressurization, and a negative feedback control system to rigorously control dissolved oxygen levels. Monitoring dissolved oxygen continuously during pressurization, we find that the ensuing response exhibits characteristics of a second- or higher-order system which can be mathematically modeled using a second-order differential equation. Finally, we use the system to model chronic nerve compression injuries, such as carpal tunnel syndrome and spinal nerve root stenosis, with myelinated neuron-Schwann cell co-cultures. Cell membrane integrity assay results show that co-cultures respond differently to hydrostatic pressure, depending on the magnitude and duration of stimulation. In addition, we find that myelinated Schwann cells proliferate in response to applied hydrostatic compression.

Mechanical induction of gene expression in connective tissue cells

The extracellular matrices of mammals undergo coordinated synthesis and degradation, dynamic remodeling processes that enable tissue adaptations to a broad range of environmental factors, including applied mechanical forces. The soft and mineralized connective tissues of mammals also exhibit a wide repertoire of mechanical properties, which enable their tissue-specific functions and modulate cellular responses to forces. The expression of genes in response to applied forces are important for maintaining the support, attachment, and function of various organs including kidney, heart, liver, lung, joint, and periodontium. Several high-prevalence diseases of extracellular matrices including arthritis, heart failure, and periodontal diseases involve pathological levels of mechanical forces that impact the gene expression repertoires and function of bone, cartilage, and soft connective tissues. Recent work on the application of mechanical forces to cultured connective tissue cells and various in vivo force models have enabled study of the regulatory networks that control mechanically induced gene expression in connective tissue cells. In addition to the influence of mechanical forces on the expression of type 1 collagen, which is the most abundant protein of mammals, new work has shown that the expression of a wide range of matrix, signaling, and cytoskeletal proteins are regulated by exogenous mechanical forces and by the forces generated by cells themselves. In this chapter, we first discuss the fundamental nature of the extracellular matrix in health and the impact of mechanical forces. Next we consider the utilization of several, widely employed model systems for mechanical stimulation of cells. Finally, we consider in detail how application of tensile forces to cultured cardiac fibroblasts can be used for the characterization of the signaling systems by which mechanical forces regulate myofibroblast differentiation that is seen in cardiac pressure overload.

MMP-3 response to compressive forces in vitro and in vivo

During orthodontic tooth movement, bone resorption occurs at the compression site. However, the mechanism underlying resorption remains unclear. Applying compressive force to human osteoblast-like cells grown in a 3D collagen gel, we examined gene induction by using microarray and RT-PCR analysis. Among 43 genes exhibiting significant changes, cyclo-oxygenase-2, ornithine decarboxylase, and matrix metalloproteinase-3 (MMP-3) were up-regulated, whereas membrane-bound interleukin-1 receptor accessory protein was down-regulated. The MMP-3 protein increases were further confirmed by Western blot. To ascertain whether MMP-3 is up-regulated in vivo by orthodontic force, we examined human bone samples at the compressive site by realigning the angulated molars. Immunohistochemical staining revealed MMP-3 distributed along the compressive site of the bony region within 3 days of compression. Since MMP-3 participates in degradation of a wide range of extracellular matrix molecules, we propose that MMP-3 plays an important role in bone resorption during orthodontic tooth movement.

Dominant negative Bmp5 mutation reveals key role of BMPs in skeletal response to mechanical stimulation

Background

Over a hundred years ago, Wolff originally observed that bone growth and remodeling are exquisitely sensitive to mechanical forces acting on the skeleton. Clinical studies have noted that the size and the strength of bone increase with weight bearing and muscular activity and decrease with bed rest and disuse. Although the processes of mechanotransduction and functional response of bone to mechanical strain have been extensively studied, the molecular signaling mechanisms that mediate the response of bone cells to mechanical stimulation remain unclear.

Results

Here, we identify a novel germline mutation at the mouse Bone morphogenetic protein 5 (Bmp5) locus. Genetic analysis shows that the mutation occurs at a site encoding the proteolytic processing sequence of the BMP5 protein and blocks proper processing of BMP5. Anatomic studies reveal that this mutation affects the formation of multiple skeletal features including several muscle-induced skeletal sites in vivo. Biomechanical studies of osteoblasts from these anatomic sites show that the mutation inhibits the proper response of bone cells to mechanical stimulation.

Conclusion

The results from these genetic, biochemical, and biomechanical studies suggest that BMPs are required not only for skeletal patterning during embryonic development, but also for bone response and remodeling to mechanical stimulation at specific anatomic sites in the skeleton.

The effect of centrifugal force on the mRNA and protein levels of ATF4 in cultured human periodontal ligament fibroblasts

OBJECTIVE

The aim of this study was to examine the changes of ATF4 expression in cultured human periodontal ligament fibroblasts (hPDLF) after mechanical stimuli, and to investigate whether ATF4 is essential for the mechanical stress-induced hPDLF differentiation.

METHODS

Reverse transcriptase polymerase chain reaction (RT-PCR) and western blotting were used to examine mRNA and protein levels of ATF4 expression in hPDLFs after application of centrifugal force. pMyc-ATF4 transfected cells were subjected to centrifugal force for 30min, and the changes of alkaline phosphatase (ALP) activity and osteocalcin (OCN), osteopontin (OPN), collagen I (COLI), bone sialoprotein (BSP) genes were measured to assess the differentiation of hPDLFs.

RESULTS

The mRNA and protein levels of ATF4 increased shortly and then decreased rapidly towards its pre-pressure levels. Overexpression of pMyc-ATF4 exhibited a greater increase in ALP activity and all four osteogenic genes compared to the untransfected cells in response to the centrifugal force.

CONCLUSION

Our results indicate that ATF4 is essential in response of hPDLFs to mechanical stress, resulting in increased differentiation of hPDLFs to osteoblast-like cells.

Effects of hydrostatic pressure on cytoskeleton and BMP-2, TGF-beta, SOX-9 production in rat temporomandibular synovial fibroblasts

OBJECTIVE

Recent experimental evidence has suggested that pressure may play an important role in the pathogenesis of arthritic diseases such as temporomandibular disorders (TMDs), rheumatic diseases and osteoarthritis. This study examines the effects of hydrostatic pressure (HP) on cytoskeleton and protein production of bone morphogenetic protein-2 (BMP-2), transforming growth factor-beta (TGF-beta) and the SRY HMG box related gene 9 (SOX-9) in synovial fibroblasts (SFs) of rat temporomandibular joint (TMJ).

METHODS

SFs derived from rat TMJ were grown to confluence in Dulbecco's modified Eagle medium supplemented with 15% fetal calf serum. The monolayer of SFs was subjected to different HPs (0, 30, 60, and 90kPa) by an in-house designed pressure chamber for 12h. Changes of cell morphology were observed by fluorescent microscope. Production of TGF-beta, BMP-2 and SOX-9 was examined by immunocytochemical assay and western blot.

RESULTS

Compared with the untreated control, the cellular actin configuration of SFs became elongated and more intense F-actin stress fiber staining was observed after HP loading. Exposure of SFs to HP for 12h resulted in significant up-regulation of BMP-2 by 46, 54, and 66% at 30, 60, and 90kPa, respectively, whilst TGF-beta increased by 11, 19, and 28% at 30, 60, and 90kPa, respectively. HP also induced the increase of SOX-9 by 72% at 30kPa and 83% at 60kPa, but only 54% at 90kPa.

CONCLUSIONS

The obtained data suggest that HP induced the alteration of cytoskeleton and bone-morphogenetic-related proteins' production of SFs, which may influence the pathological condition of TMDs.

Development of Pore Pressure Measurement System in Lacunocanalicular Network of Trabeculae Using MEMS Based Micro-Pressure Transducer

Experimental measurement of pore pressure generation in lacunocanalicular network of trabeculae is never measured, although the characteristics could be important for bone remodeling. In this study, the pore pressure generation in micro-trabecular specimens within the elastic range was measured in vitro using a specially designed micro-experimental setup and a MEMS based micro-pressure transducer. Then, a quasi-static loading (9㎛/min) was applied up to the strain of 0.4 % with measuring pore pressure generations in the undrained and drained conditions. 49.2 ± 4.45 KPa of pore pressure generation at the 0.4% strain was found in the undrained condition. In contrast, no pore pressure generation was measured in the drained condition. The result could let us know the amount of a possible maximum pore pressure generation in lacunocanalicular network of trabeculae within the elastic range.

Bone Regeneration on Macroporous Aqueous-Derived Silk 3-D Scaffolds

Spinner flask culture under osteogenic conditions was used to study osteogenic outcomes from human bone marrow-derived mesenchymal stem cells (hMSCs) seeded on aqueous-derived porous silk scaffolds. Of particular novelty was the use of larger sized scaffolds (15 mm diameter, 5 mm thick) and large pore sizes ( approximately 900-1 000 micron diameter). Cultures were maintained for 84 d in the spinner flasks and compared to static controls under otherwise similar conditions. The spinner flask cultures demonstrated enhanced cell proliferation compared to static cultures and the improved fluid flow promoted significantly improved osteogenic related outcomes based on elevated alkaline phosphatase (ALP) activity and the deposition of mineralized matrix. The expression of osteogenic differentiation associated markers based on real time PCR also demonstrated increased responses under the dynamic spinner flask culture conditions. Histological analysis showed organized bone-like structures in the constructs cultured in the spinner flasks after 56 d of culture. These structures stained intensely with von Kossa. The combination of improved transport due to spinner flask culture and the use of macroporous 3D aqueous-derived silk scaffolds with large pore sizes resulted in enhanced outcomes related to bone tissue engineering, even with the use of large sized scaffolds in the study. These results suggest the importance of the structure of the silk biomaterial substrate (water vs. solvent based preparation) and large pore sizes in improved bone-like outcomes during dynamic cultivation.

Differential Gene Expression of Periodontal Ligament Cells After Loading of Static Compressive Force

BACKGROUND

Compressive force is an important mechanical stimulus on the periodontal ligament (PDL) and is closely related to therapeutic tooth movement. In this study, early or late response genes related to the compressive stress in PDL cells were evaluated. Particularly, the expression of interleukin (IL)-6, IL-8, and alkaline phosphatase (ALP) was studied.

METHODS

The primary cultured cells from PDL were grown in a three-dimensional collagen gel, and received a continuous static compressive force (1.76 g/cm(2)). The expressed genes were screened by cDNA microarray assays for 2 or 12 hours after the initiation of the mechanical force application. The genes of interest that showed significant changes in expression in the cDNA microarray assay were analyzed further by quantitative reverse transcriptase polymerase chain reaction (RT-PCR), enzyme-linked immunoabsorbent assays (ELISA), and ALP assays.

RESULTS

ALP, IL-6, and IL-8 were selected among the genes that significantly changed expression (/M/ >0.7) and subsequently were confirmed by quantitative RT-PCR. The secreted protein concentrations for IL-6, IL-8, and ALP activity were measured at 72 hours after application of continuous static compressive force. The protein level of IL-6 was significantly increased at 72 hours (P <0.001), but there was no significant change in IL-8 (P >0.05). ALP activity was decreased approximately 41.5% compared to the control (P = 0.015).

CONCLUSIONS

Considering that IL-6 is a potent osteoclast activator and the compressive side of PDL during orthodontic tooth movement shows the resorption of calcified tissue, the changed expression of IL-6 and ALP in response to the static compressive force in PDL cells may contribute to the orthodontic tooth movement or alveolar bone remodeling.

Decreased CD90 expression in human mesenchymal stem cells by applying mechanical stimulation

Background

Mesenchymal stem cells (MSC) are multipotent cells which can differentiate along osteogenic, chondrogenic, and adipogenic lineages. The present study was designed to investigate the influence of mechanical force as a specific physiological stress on the differentiation of (MSC) to osteoblast-like cells.

Methods

Human MSC were cultured in osteoinductive medium with or without cyclic uniaxial mechanical stimulation (2000 μstrain, 200 cycles per day, 1 Hz). Cultured cells were analysed for expression of collagen type I, osteocalcin, osteonectin, and CD90. To evaluate the biomineral formation the content of bound calcium in the cultures was determined.

Results

After 14 days in culture immunfluorescence staining revealed enhancement of collagen type I and osteonectin expression in response to mechanical stimulation. In contrast, mechanically stimulated cultures stained negative for CD90. In stimulated and unstimulated cultures an increase in the calcium content over time was observed. After 21 days in culture the calcium content in mechanical stimulated cultures was significantly higher compared to unstimulated control cultures.

Conclusion

These results demonstrate the influence of mechanical force on the differentiation of human MSC into osteoblast-like cells in vitro. While significant enhancement of the biomineral formation by mechanical stimulation is not detected before 21 days, effects on the extracellular matrix became already obvious after 14 days. The decrease of CD90 expression in mechanically stimulated cultures compared to unstimulated control cultures suggests that CD90 is only transiently expressed expression during the differentiation of MSC to osteoblast-like cells in culture.

Molecular pathways mediating mechanical signaling in bone

Bone tissue has the capacity to adapt to its functional environment such that its morphology is "optimized" for the mechanical demand. The adaptive nature of the skeleton poses an interesting set of biological questions (e.g., how does bone sense mechanical signals, what cells are the sensing system, what are the mechanical signals that drive the system, what receptors are responsible for transducing the mechanical signal, what are the molecular responses to the mechanical stimuli). Studies of the characteristics of the mechanical environment at the cellular level, the forces that bone cells recognize, and the integrated cellular responses are providing new information at an accelerating speed. This review first considers the mechanical factors that are generated by loading in the skeleton, including strain, stress and pressure. Mechanosensitive cells placed to recognize these forces in the skeleton, osteoblasts, osteoclasts, osteocytes and cells of the vasculature are reviewed. The identity of the mechanoreceptor(s) is approached, with consideration of ion channels, integrins, connexins, the lipid membrane including caveolar and non-caveolar lipid rafts and the possibility that altering cell shape at the membrane or cytoskeleton alters integral signaling protein associations. The distal intracellular signaling systems on-line after the mechanoreceptor is activated are reviewed, including those emanating from G-proteins (e.g., intracellular calcium shifts), MAPKs, and nitric oxide. The ability to harness mechanical signals to improve bone health through devices and exercise is broached. Increased appreciation of the importance of the mechanical environment in regulating and determining the structural efficacy of the skeleton makes this an exciting time for further exploration of this area.

Direct compression as an appropriately mechanical environment in bone tissue reconstruction in vitro

Determining how to apply an appropriately mechanical environment which can improve the quality and function of bone-like construct in vitro is a required problem to be solved for the current development of bone tissue engineering. A specific mechanical force may be a key determinant of tissue development in vitro in bone tissue engineering. From the standpoint of bionics, the mechanical environments applied on bone tissue engineering should work in three aspects: providing adequately mechanical stimuli to the cells seeded in 3-D scaffold; ensuring the efficient mass-transport of the nutrients and waste products of the cells; promoting the development of functionally extracellular matrix in 3-D scaffold. After the analysis of several differently mechanical environments comparing with that in vivo, the directly dynamical compression environment, instead of hydrostatic pressure or microgravity or direct perfusion, can recreate the in vivo mechanisms of mechanosensation, mechanotransduction and mass-transport during engineered bone-like tissue culturing process in vitro. Therefore, it is hypothesized that the directly dynamic compression will be a specific mechanical environment to bone tissue reconstruction in vitro.

Cell proliferation of cultured human cancer cells are affected by the elevated tumor pressures that exist in vivo

Elevated interstitial fluid pressure (IFP) is observed in most solid tumors. However, the study of the cellular processes of tumors and the development of chemotherapy are routinely studied using in vitro culture systems at atmospheric pressure. Using a new pressurized cell culture system, we investigated the influence of hydrostatic pressure on population dynamics of three primary osteosarcoma (HOS, U2OS, SaOS2) and two metastatic tumor cell lines (MCF7 breast, H1299 lung) that invade bone. Values of IFP in normal human bone and muscle, and in osteosarcoma tumors obtained during their surgical biopsy established the hydrostatic pressure range for the in vitro cell studies. The IFP values were obtained from a retrospective review of patient records. IFP from confirmed osteosarcoma was 35.9+/- 16.2 mmHg. Tumor IFP was significantly higher than muscle IFP (p < 0.001) and bone IFP (p < 0.003). The in vitro study measured the cell-line proliferation using hydrostatic pressures of 0, 20, 50 and 100 mmHg. The findings suggest that hydrostatic pressure either increases or decreases tumor proliferation rates depending on cell type. Furthermore, cell death was not associated with apoptosis.

Influence of increased mechanical loading by hypergravity on the microtubule cytoskeleton and prostaglandin E2 release in primary osteoblasts

Cells respond to a wide range of mechanical stimuli such as fluid shear and strain, although the contribution of gravity to cell structure and function is not understood. We hypothesized that bone-forming osteoblasts are sensitive to increased mechanical loading by hypergravity. A centrifuge suitable for cell culture was developed and validated, and then primary cultures of fetal rat calvarial osteoblasts at various stages of differentiation were mechanically loaded using hypergravity. We measured microtubule network morphology as well as release of the paracrine factor prostaglandin E2 (PGE2). In immature osteoblasts, a stimulus of 10x gravity (10 g) for 3 h increased PGE2 2.5-fold and decreased microtubule network height 1.12-fold without affecting cell viability. Hypergravity (3 h) caused dose-dependent (5-50 g) increases in PGE2 (5.3-fold at 50 g) and decreases (1.26-fold at 50 g) in microtubule network height. PGE2 release depended on duration but not orientation of the hypergravity load. As osteoblasts differentiated, sensitivity to hypergravity declined. We conclude that primary osteoblasts demonstrate dose- and duration-dependent sensitivity to gravitational loading, which appears to be blunted in mature osteoblasts.

Mechanical signals as regulators of stem cell fate

In recent years, stem cells have shown significant promise for their potential to provide a source of undifferentiated progenitor cells for therapeutic applications in tissue or organ repair. Significant questions still remain, however, as to the genetic and epigenetic signals that regulate the fate of stem cells. It is now well accepted that the micro-environment of the stem cell can have a significant influence on its differentiation and phenotypic expression. Although emphasis has been placed in previous work on the role of soluble mediators such as growth factors and cytokines on stem cell differentiation, there is now significant evidence, both direct and indirect, that mechanical signals may also regulate stem cell fate. We review a number of in vivo and in vitro studies that have provided evidence that mechanical factors have the ability to influence the differentiation of a number of cells that have been classified as either precursor, progenitor, or stem cells. Taken together, these studies show that specific mechanical signals may promote cell differentiation into a particular phenotype, potentially having an effect on embryonic development. The use of such mechanical signals in vitro in specially designed "bioreactors" may provide important adjuncts to standard biochemical signaling pathways for promoting engineered tissue growth. A further understanding of the biomechanical and biochemical pathways involved in mechanical signal transduction by stem cells will hopefully provide new insight for the improvement of stem-cell based therapies.

Longitudinal monitoring of subgingival colonization by Actinobacillus actinomycetemcomitans, and crevicular alkaline phosphatase and aspartate aminotransferase activities around orthodontically treated teeth

OBJECTIVES

During orthodontic treatment, changes in subgingival plaque colonization and tissue inflammation and remodelling have been described. This study uses a longitudinal design to examine subgingival colonization of Actinobacillus actinomycetemcomitans (Aa) and alkaline phosphatase (ALP) and aspartate aminotransferase (AST) activities in gingival crevicular fluid (GCF) in order to assess whether these parameters have potential as biomarkers of tissue responses to orthodontic tooth movement in humans.

MATERIALS & METHODS

Twenty-one patients (ages: 11.2-22.5; mean 17.1 +/- 3.3 years) participated in the study. An upper canine from each patient undergoing treatment for distal movement served as the test tooth (DC), and its contralateral (CC) and antagonist (AC) canines were used as controls. The CC was included in the orthodontic appliance, but was not subjected to the orthodontic force; the AC was free from any orthodontic appliance. The subgingival plaque and GCF around the experimental teeth was harvested from both mesial and distal tooth sites immediately before appliance activation and on day 28. Clinical gingival condition was evaluated at the baseline and at the end of the experimental period. Aa colonization was determined by culture methods, while ALP and AST activities were evaluated spectrophotometrically.

RESULTS

Throughout the study, the clinical conditions worsened in both the DCs and the CCs as compared with the baseline, whereas no significant differences were found between the DCs and the CCs, or between mesial and distal sites of each of these teeth on day 28. In the ACs, clinical parameters remained at baseline levels throughout the study. Similar results were found for Aa colonization, which increased significantly on day 28 in the DC and CC groups. On day 28, ALP and AST activities were significantly elevated in all sites from the DC and CC groups as compared with the ACs, where, conversely, enzymatic activities remained at the baseline levels. However, ALP activity in the DC group was significantly greater than in the CCs at mesial (tension) sites on day 28, while AST activity in the DCs was significantly elevated as compared with the CC group at the distal (compression) sites. Greater ALP activity in the DC group was observed at the tension sites compared with the compression sites on day 28.

CONCLUSIONS

Our results suggest that Aa subgingival colonization, and ALP and AST activities in GCF reflect the tissue responses that occur in the periodontium during orthodontic treatment.

Stimulating effect of implant loading on surrounding bone

A number of algorithms have been proposed to model the adaptive behavior of bone under load. However, the predictions of several models have neither been compared nor have they been systematically related to in vivo data. To this end, the stress states of loaded implant-bone interfaces were analyzed before and after osseointegration using finite element (FE) techniques. In a preliminary step, an FE mesh of a cylindrical implant encased in a cancellous core surrounded by a cortical layer was constructed, and the stresses and strains that developed at the interface were determined. The implant was loaded with 100 N vertical and 30 N lateral loads. Using this structure, the peak compressive and tensile stresses were determined. Then bone remodeling predictions were assessed using three different models: von Mises equivalent strain, strain energy density and effective stress. Finally, a systematic search of the literature was conducted to relate the numerical predictions to existing in vivo data. The FE simulations led to the following conclusions: (1) calculated compressive stresses were lower than the ultimate compressive stresses of cortical and cancellous bone. (2) Calculated tensile stresses were generally superior to experimental data on the tensile strength of the bone-implant interface. (3) With one exception, the predictions of all models were homogeneously grouped on the stimulus scales. (4) The predictions of the models as to bone gain or loss were not consistent and at times contradictory. It is hypothesized that this effect is linked to a lazy zone that is too narrow. With respect to the application of the numerical models to in vivo data, peak strains and strain energy densities were consistent with in vivo data. No in vivo data were found that supported effective stress as a stimulus.

Pressure simulation of orthodontic force in osteoblasts: a pilot study

OBJECTIVES

To elucidate the RUNX2 gene expression induction in human osteoblasts after mechanical loading.

DESIGN

Using a stringent pulse-chase protocol human osteoblasts were exposed to centrifugal pressure force for 30 and 90 min. Untreated control cells were processed in parallel. Before, and at defined times after centrifugation, total RNA was isolated. RUNX2 gene expression was measured using real-time quantitative reverse transcriptase polymerase chain reaction. The stress/control ratio was used to illustrate possible stimulatory or diminishing effects of force application.

RESULTS

Immediately after 30 min of force application the RUNX2 gene expression was induced by a factor of 1.7 +/- 0.14 as compared with the negative control. This induction decreased rapidly and reached its pre-load levels within 30 min. Longer force applications (up to 90 min) did not change the RUNX2 gene expression.

CONCLUSION

In mature osteoblasts centrifugal pressure force stimulates RUNX2 gene expression within a narrow time frame: loading of mature cells results in a temporary increase of RUNX2 expression and a fast downregulation back to its pre-load expression level. With this pilot study the gene expression behavior after mechanical stimuli could be determined with a simple laboratory setup.

Static magnetic fields-induced bone sialoprotein (BSP) expression is mediated through FGF2 response element and pituitary-specific transcription factor-1 motif

Bone sialoprotein (BSP) is a sulfated and phosphorylated glycoprotein found almost exclusively in mineralized connective tissues. Recent studies on the developmental expression of BSP mRNA and temporo-spatial appearance of the protein during bone formation in vivo and in vitro have demonstrated that BSP is expressed by differentiated osteoblasts, and that it may function in the initial nucleation of hydroxyapatite crystals in de novo bone formation. Physical forces may play a fundamental role in the regulation of cell function in bone, but little is known about how cells are able to sense mechanical loads and signal transduction. Magnetic fields of sufficient magnitude have been shown to affect various biologic systems at organ, tissue, cellular, and subcellular levels. In the present study, rat osteosarcoma-derived osteoblast-like cells, UMR 106, were used to assess the effect of static magnetic fields (SMF) on gene transcription of BSP. In our culture system, application of 300 and 800 Gauss SMF increased BSP mRNA levels after 24 h stimulation. To determine the molecular basis of the transcriptional regulation of BSP gene transcription by SMF, we conducted transient transfection analyses with chimeric constructs of the rat BSP gene promoter linked to a luciferase (LUC) reporter gene. SMF (300 and 800 Gauss) increased expression of the construct (pLUC3; -116 to +60) after 24 h treatment. Further deletion analysis of the BSP promoter showed that a region within nt -116 to -84 was targeted by SMF, the effect of which was inhibited by the tyrosine kinase inhibitor herbimycin A (HA). Mutations (2 bp) were made in an inverted CCAAT box between nt -50 and -46, a cyclicAMP response element (CRE; between nt -75 and -68), a fibroblast growth factor-2 response element (FRE; -92 to -85), and a pituitary-specific transcription factor-1 motif (Pit-1; nt -111 to -105) within the pLUC3 construct. Transcriptional stimulation by SMF was almost completely abrogated in constructs that included 2-bp mutations in the FRE and Pit-1. Binding of nuclear proteins to a radiolabeled FRE was increased and that to a Pit-1 was decreased in nuclear extracts prepared from SMF-stimulated UMR 106 cells. Further, the stimulatory and inhibitory effects of SMF on FRE and Pit-1 DNA-protein complexes were completely abolished by HA treatment. These studies, therefore, show that SMF increases BSP transcription through a tyrosine kinase-dependent pathway and that the SMF effects are mediated through juxtaposed FRE and Pit-1elements in the proximal promoter of the BSP gene.

Cathepsins B and L increased during response of periodontal ligament cells to mechanical stress in vitro

Cathepsin is a typical and well-characterized lysosomal cysteine protease that, under pathological conditions, is involved in tissue destruction. A recent immunocytochemical study demonstrated that cathepsins B (CAB) and L (CAL) were localized in the periodontal ligament (PDL) of the rat molar, and they were expressed in compressed sites during experimental tooth movement. Further, we demonstrated previously that the levels of CAB and CAL in gingival crevicular fluid increased during orthodontic tooth movement. Therefore, CAB and CAL may play important roles in the process of collagen degradation during orthodontic tooth movement, and our in vitro study examined the secretion of CAB and CAL in PDL cells following mechanical stress. PDL cells were subjected to 0.5, 1.0, 2.0, or 3.0 g/cm2 of compression force or an increase in surface area by tension force of 0.28%, 0.95%, 1.72%, or 2.50% for 24 hr. For detection of CAB and CAL in conditioned medium, commercially available ELISA kits were used. We found compression and tension significantly increased the secretions of both CAB and CAL in PDL cells, which were exhibited in a time- and force magnitude-dependent manner. The compression-stimulated secretion of CAB was increased approximately 3-fold and that of CAL 4-fold, as compared with the control. Further, tension-stimulated secretion of CAB was increased by 1.5-fold and that of CAL 2-fold compared with the control. When analyzed using a semiquantitative polymerase chain reaction assay, CAB and CAL mRNA were increased in response to both compression and tension forces. These findings demonstrated that mechanical stress (compression and tension forces) causes an increase in secretion of CAB and CAL in PDL cells in vitro.

Aspartate aminotransferase activity in gingival crevicular fluid during orthodontic treatment. A controlled short-term longitudinal study

BACKGROUND

During orthodontic tooth movement, the early response of periodontal tissues to mechanical stress involves an acute inflammatory response, with a sequence characterized by periods of activation, resorption, reversal, and formation in both tension and compression sites. This study used a longitudinal design to examine aspartate aminotransferase (AST) activity in gingival crevicular fluid (GCF) in order to assess whether AST in GCF has potential as a possible diagnostic aid to monitor tooth movement and tissue response during orthodontic treatment.

METHODS

Eighteen patients (mean age, 16.1 years) participated in the study. An upper first molar from each patient undergoing treatment for distal movement served as the test tooth (TT), with its contralateral (CC) and antagonist (AC) first molars used as controls. The CC was included in the orthodontic appliance, but was not subjected to the orthodontic force; the AC was free from any orthodontic appliance. The GCF around the experimental teeth was collected from both mesial and distal tooth sites immediately before appliance activation, 1 hour after, and weekly over the following 4 weeks. Clinical gingival condition was evaluated at baseline and at the end of the experimental period. AST activity was determined spectrophotometrically at 30 degrees C, and the results were expressed as total AST activity (mU/sample).

RESULTS

Throughout the experiment, AST levels were significantly elevated in all sites from the TT and CC groups compared to the AC group where, conversely, AST activity remained at the baseline level. However, enzyme levels in the TT group were significantly greater than in the CCs at tension sites on day 14, and in compression sites on days 7 and 14. Moreover, AST activity from the TT group was significantly greater in compression sites than in tension sites on day 7; this was not observed for the CCs.

CONCLUSIONS

Our results suggest that AST levels in GCF reflect the biological activity which occurs in the periodontium during controlled occlusal trauma and, therefore, should be further evaluated as a diagnostic tool for monitoring correct orthodontic tooth movement in clinical practice.

Conditioned medium of mechanically compressed chick limb bud cells promotes chondrocyte differentiation

Previous studies have demonstrated that chondrocyte differentiation can be stimulated by cyclic mechanical compression of chick limb bud cell-agarose constructs. This study reveals that medium collected from these compressed cultures promotes chondrocyte differentiation of non-compressed cells to approximately the same extent as compression alone. In micromass cultures of chick limb bud cells, incubation with medium from compressed cells significantly enhanced cell proliferation and the average rate of proteoglycan synthesis in a dose-dependent manner. These findings indicate that the response of undifferentiated chick limb bud cells to mechanical loading involves the secretion of one or more soluble differentiation factors. The chondrogenic activity of the conditioned medium was substantially inhibited by passage through a filter with a nominal molecular-weight cutoff (MWCO) of 10 kDa but not inhibited when using a MWCO of 30 kDa, suggesting that at least one of these factors has a molecular mass between 10 and 30 kDa.

Effects of insulin-like growth factor-I on the expression of osteoclasts and osteoblasts in the nasopremaxillary suture under different masticatory loading conditions in growing mice

It is well accepted that mechanical loading inhibits bone resorption and increases in vivo bone formation. It is also known that cyclic mechanical loading, in particular, can enhance bone formation significantly. These findings suggest a significant role for mechanical stimuli in bone remodelling mediated by various local growth factors including insulin-like growth factor-I (IGF-I). Earlier studies showed that the nasal bone length and premaxillary bone width were significantly greater in mice fed a solid diet rather than a granulated diet, and that these dimensions increased significantly in a solid-diet group treated with IGF-I. The present study sought to examine the effect of IGF-I on the expression of osteoclasts and osteoblasts in the nasopremaxillary suture subjected to different masticatory loadings. For the solid-diet groups, the numbers of tartrate-resistant acid phosphatase (TRAP)-positive osteoclastic cells and osteoblasts were significantly greater in the group injected with IGF-I than in the animals injected with physiological saline. In the groups fed a granulated diet, no significant differences in the numbers of TRAP-positive osteoclastic cells and osteoblasts were found over the entire experimental period between mice injected with either IGF-I or physiological saline. It is shown that IGF-I significantly induces the expression of osteoclasts and osteoblasts and the subsequent bone remodelling, and that the effect may be additive as compared to that of mechanical masticatory loading, which seems to be more important in bone remodelling in terms of the numbers of osteoclasts and osteoblasts.

Alkaline phosphatase activity in gingival crevicular fluid during human orthodontic tooth movement

Bone remodeling that occurs during orthodontic tooth movement is a biologic process involving an acute inflammatory response in periodontal tissues. A sequence characterized by periods of activation, resorption, reversal, and formation has been recently described as occurring in both tension and compression tooth sites during orthodontic tooth movement. We used a longitudinal design to investigate alkaline phosphatase (ALP) activity in gingival crevicular fluid (GCF) to assess whether it can serve as a diagnostic aid in orthodontics. Sixteen patients (mean age, 15.5 years) participated in the study. The maxillary first molars under treatment served as the test teeth (TT) in each patient; in particular, 1 first molar was to be retracted and hence was considered the distalized molar (DM), whereas the contralateral molar (CM) was included in the fixed orthodontic appliance but was not subjected to the distal forces. The DM antagonist first molar (AM), free from any orthodontic appliance, was used as the baseline control. The GCF around the experimental teeth was harvested from mesial and distal tooth sites immediately before appliance activation, 1 hour after, and weekly over the following 4 weeks. The clinical gingival condition was evaluated at the baseline and at the end of the experimental term. ALP activity was determined spectrophotometrically at 30 degrees C, and the results were expressed as total ALP activity (mUnits/sample). GCF ALP activity was significantly elevated in the DMs and the CMs as compared with the AMs at 1, 2, 3, and 4 weeks; conversely, in the AMs, GCF ALP activity remained at baseline levels throughout the experiment. Moreover, the enzyme activity in the DMs was significantly greater than in the CMs. In the DMs, a significantly greater ALP activity was observed in sites of tension compared with sites of compression. This difference was not seen with the CMs, in which the enzyme activity increased to the same extent in tension and compression sites. These results suggest that ALP activity in GCF reflects the biologic activity in the periodontium during orthodontic movement and therefore should be further investigated as a diagnostic tool for monitoring orthodontic tooth movement in clinical practice.

Effects of cyclic pressure on bone marrow cell cultures

The present in-vitro study used bone marrow cell cultures and investigated the effects of cyclic pressure on osteoclastic bone resorption. Compared to control (cells maintained under static conditions), the number of tartrate resistant acid phosphatase (TRAP)-positive, osteoclastic cells was significantly (p<0.05) lower when, immediately upon harvesting, bone marrow cells were exposed to cyclic pressure (10-40 kPa at 1.0 Hz). In contrast, once precursors in bone marrow cells differentiated into osteoclastic cells under static culture conditions for 7 days, subsequent exposure to the cyclic pressure of interest to the present study did not affect the number of osteoclastic cells. Most important, exposure of bone marrow cells to cyclic pressure for 1 h daily for 7 consecutive days resulted in significantly (p<0.05) lower osteoclastic bone resorption and in lowered mRNA expression for interleukin-1 (IL-1) and tumor necrosisfactor-a (TNF-a), cytokines that are known activators of osteoclast function. In addition to unique contributions to osteoclast physiology, the present study provided new evidence of a correlation between mechanical loading and bone homeostasis as well as insight into the molecular mechanisms of bone adaptation to mechanical loading, namely cytokine-mediated control of osteoclast functions.

A cell-culture system for long-term maintenance of elevated hydrostatic pressure with the option of additional tension

In cell stress research, there is still a need to apply long-term hydrostatic pressure without changing any other environmental condition. We present here a new, open, pressurized chamber system allowing long-term sustained and dynamic application of hydrostatic pressure with the option of additional tension. Based on the computer-controlled Flexcell Strain Unit, we designed a pressurized chamber with a dynamic airflow and a defined membrane extension, which can be regulated by spacers. During operation up to 26.6kPa, O(2) partial pressures and pH in the cell-culture medium do not change compared to control cultures kept at normal atmosphere.

Temporal pattern of stimulation of osteoblast-associated genes during mechanically-induced osteogenesis in vivo: early responses of osteocalcin and type I collagen

Mechanical loading is an essential environmental factor in skeletal homeostasis, but the response of osteoblast-associated genes to mechanical osteogenic signal is largely unknown. This study uses our recently characterized in vivo osteoinductive model to analyze the sequence of stimulation and the time course of expression of osteoblast-associated genes in mechanically loaded mouse periodontium. Temporal pattern of regulation of osteocalcin (OC), alkaline phosphatase (ALP), and type I collagen (collagen I) was determined during mechanically-induced osteoblast differentiation in vivo, using a mouse tooth movement model earlier shown to induce bone formation and cell-specific regulation of genes in osteoblasts. The expression of target genes was determined after 1, 2, 3, 4, and 6 days of orthodontic movement of the mouse first molar. mRNA levels were measured in the layer of osteoblasts adjacent to the alveolar bone surface, using in situ hybridization and a relative quantitative video image analysis of cell-specific hybridization intensity, with non-osseous mesenchymal periodontal cells as an internal standard. After 24 hours of loading, the level of OC in osteoblasts slightly decreased, followed by a remarkable 4.6-fold cell-specific stimulation between 1 and 2 days of treatment. The high level expression of OC was maintained throughout the treatment with a peak 7-fold stimulation at day 4. The expression of collagen I gene was not significantly affected after 1 day, but it was stimulated 3-fold at day 2, and maintained at a similar level through day 6. The ALP gene, which we previously found to be mechanically stimulated during the first 24 hours, remained enhanced from 1.8- to 2.2-fold throughout the 6 days of treatment. Thus, in an intact alveolar bone compartment, mechanical loading resulted in a defined temporal sequence of induction of osteoblast-associated genes. Stimulation of OC 48 h after the onset of loading (and 24 h prior to deposition of osteoid) temporally coincided with that of collagen I, and was preceded for 24 h by an enhancement of ALP. Identification of OC as a mechanically responsive gene induced in functionally active osteoblasts in this study is consistent with its potential role in limiting the rate of mechanically-induced bone modeling. Furthermore, these results show that temporal progression of mechanically-induced osteoblast phenotype in this in vivo model occurs very rapidly. This suggests that physiologically relevant mechanical osteoinductive signal in vivo is targeting a population of committed osteoblast precursor cells that are capable of rapidly responding by entering a differentiation pathway and initiating an anabolic skeletal adaptation process.