Elastographic imaging of strain distribution in the anterior cruciate ligament and at the ligament-bone insertions

Anterior cruciate ligament tissue stiffness and anterior tibial translation are increased in patients with medial meniscus posterior root tear

INTRODUCTION

To evaluate the structural and functional relationship between medial meniscus posterior root tear (MMPRT) and anterior cruciate ligament (ACL), the aim was to assess the structure and elasticity of the ACL in patients with MMPRT and to measure tibial anterior translation.

MATERIALS AND METHODS

Between January and June 2024, 56 patients (study group) were diagnosed with unilateral MMPRT on magnetic resonance imaging (MRI) and 31 healthy volunteers (control group) were included in the study. While the tibial anterior translation of the patients was evaluated using the KT 1000 device, the structure and stiffness of the ACL were assessed with ultrasound shear wave elastography (SWE). The tibial slope measurement was taken at 30 degrees of knee flexion on true lateral radiographs where the femoral condyles overlapped.

RESULTS

A total of 87 participants were included in the study, consisting of 31 volunteers (25 females, 6 males) and 56 patients diagnosed with MMPRT (48 females, 8 males). The average SWE values of the ACL were compared between the study group (26.6 ± 8.9 kPa) and the control group (21.2 ± 5.7 kPa), with the study group demonstrating a significantly higher value (p: 0.004). In patients with MMPRT, the measurements of anterior translation using the KT 1000 device were an average of 6.19 ± 1.4 mm in the affected knees and 4.9 ± 0.78 mm in the unaffected knees. The comparison revealed a significantly greater anterior translation in the knees with MMPRT (p < 0.05). Multivariable regression analysis demonstrated a significant positive relationship between ACL SWE values and tibial slope (β = 1.11; CI, 0.24-1.99; P: 0.01).

CONCLUSIONS

Greater tibial anterior translation was observed on the side with MMPRT in the patients. There is a correlation between MMPRT and the stiffness of the ACL, which exhibits a higher elastic modulus. Additionally, an increase in tibial slope significantly affects the stiffness of the ACL.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Decoding the mechanical characteristics of the human anterior cruciate ligament entheses through graduated mineralization interfaces

The anterior cruciate ligament is anchored to the femur and tibia via specialized interfaces known as entheses. These play a critical role in ligament homeostasis and joint stability by transferring forces, varying in magnitude and direction between structurally and functionally dissimilar tissues. However, the precise structural and mechanical characteristics underlying the femoral and tibial entheses and their intricate interplay remain elusive. In this study, two thin-graduated mineralization regions in the femoral enthesis (~21 μm) and tibial enthesis (~14 μm) are identified, both exhibiting distinct biomolecular compositions and mineral assembly patterns. Notably, the femoral enthesis interface exhibits progressively maturing hydroxyapatites, whereas the mineral at the tibial enthesis interface region transitions from amorphous calcium phosphate to hydroxyapatites with increasing crystallinity. Proteomics results reveal that Matrix Gla protein uniquely enriched at the tibial enthesis interface, may stabilize amorphous calcium phosphate, while C-type lectin domain containing 11 A, enriched at the femoral enthesis interface, could facilitate the interface mineralization. Moreover, the finite element analysis indicates that the femoral enthesis model exhibited higher resistance to shearing, whereas the tibial enthesis model contributes to tensile resistance, suggesting that the discrepancy in biomolecular expression and the corresponding mineral assembly heterogeneities collectively contribute to the superior mechanical properties of both the femoral enthesis and tibial enthesis models. These findings provide novel perspectives on the structure-function relationships of anterior cruciate ligament entheses, paving the way for improved management of anterior cruciate ligament injury and regeneration.

Compositional, Structural, and Biomechanical Properties of Three Different Soft Tissue-Hard Tissue Insertions: A Comparative Review

Connective tissue attaches to bone across an insertion with spatial gradients in components, microstructure, and biomechanics. Due to regional stress concentrations between two mechanically dissimilar materials, the insertion is vulnerable to mechanical damage during joint movements and difficult to repair completely, which remains a significant clinical challenge. Despite interface stress concentrations, the native insertion physiologically functions as the effective load-transfer device between soft tissue and bone. This review summarizes tendon, ligament, and meniscus insertions cross-sectionally, which is novel in this field. Herein, the similarities and differences between the three kinds of insertions in terms of components, microstructure, and biomechanics are compared in great detail. This review begins with describing the basic components existing in the four zones (original soft tissue, uncalcified fibrocartilage, calcified fibrocartilage, and bone) of each kind of insertion, respectively. It then discusses the microstructure constructed from collagen, glycosaminoglycans (GAGs), minerals and others, which provides key support for the biomechanical properties and affects its physiological functions. Finally, the review continues by describing variations in mechanical properties at the millimeter, micrometer, and nanometer scale, which minimize stress concentrations and control stretch at the insertion. In summary, investigating the contrasts between the three has enlightening significance for future directions of repair strategies of insertion diseases and for bioinspired approaches to effective soft-hard interfaces and other tough and robust materials in medicine and engineering.

Functional Imaging of the Knee-A Comprehensive Review

Knee pain is a common presenting problem in the general population. Radiographs and magnetic resonance imaging (MRI) are the cornerstones of imaging in current clinical practice. With advancements in technology, there has been increasing utilization of other modalities to evaluate knee disorders. Dynamic assessment utilizing computed tomography and portable ultrasounds have demonstrated the capacity to accurately assess and reproducibly quantify kinematics of knee disorders. Cartilage physiology can be evaluated with MRI. Emerging research has even demonstrated novel musculoskeletal applications of positron emission tomography to evaluate anterior cruciate ligament graft metabolic activity following reconstruction. As technology continues to evolve and traditional ways are improved upon, future comparative studies will elucidate the distinct advantages of the various modalities. Although radiology is still primarily an anatomic specialty, there is immense potential for functional imaging to be the standard of care. This review focuses on the most common musculoskeletal applications of functional imaging as well as future utilization.

Fatigue-driven compliance increase and collagen unravelling in mechanically tested anterior cruciate ligament

Approximately 300,000 anterior cruciate ligament (ACL) tears occur annually in the United States, half of which lead to the onset of knee osteoarthritis within 10 years of injury. Repetitive loading is known to result in fatigue damage of both ligament and tendon in the form of collagen unravelling, which can lead to structural failure. However, the relationship between tissue's structural, compositional, and mechanical changes are poorly understood. Herein we show that repetitive submaximal loading of cadaver knees causes an increase in co-localised induction of collagen unravelling and tissue compliance, especially in regions of greater mineralisation at the ACL femoral enthesis. Upon 100 cycles of 4× bodyweight knee loading, the ACL exhibited greater unravelled collagen in highly mineralized regions across varying levels of stiffness domains as compared to unloaded controls. A decrease in the total area of the most rigid domain, and an increase in the total area of the most compliant domain was also found. The results highlight fatigue-driven changes in both protein structure and mechanics in the more mineralized regions of the ACL enthesis, a known site of clinical ACL failure. The results provide a starting point for designing studies to limit ligament overuse injury.

Mesenchymal stem cells and macrophages and their interactions in tendon-bone healing

Tendon-bone insertion injuries (TBI), such as anterior cruciate ligament (ACL) and rotator cuff injuries, are common degenerative or traumatic pathologies with a negative impact on the patient's daily life, and they cause huge economic losses every year. The healing process after an injury is complex and is dependent on the surrounding environment. Macrophages accumulate during the entire process of tendon and bone healing and their phenotypes progressively transform as they regenerate. As the "sensor and switch of the immune system", mesenchymal stem cells (MSCs) respond to the inflammatory environment and exert immunomodulatory effects during the tendon-bone healing process. When exposed to appropriate stimuli, they can differentiate into different tissues, including chondrocytes, osteocytes, and epithelial cells, promoting reconstruction of the complex transitional structure of the enthesis. It is well known that MSCs and macrophages communicate with each other during tissue repair. In this review, we discuss the roles of macrophages and MSCs in TBI injury and healing. Reciprocal interactions between MSCs and macrophages and some biological processes utilizing their mutual relations in tendon-bone healing are also described. Additionally, we discuss the limitations in our understanding of tendon-bone healing and propose feasible ways to exploit MSC-macrophage interplay to develop an effective therapeutic strategy for TBI injuries.

The Translational potential of this article

This paper reviewed the important functions of macrophages and mesenchymal stem cells in tendon-bone healing and described the reciprocal interactions between them during the healing process. By managing macrophage phenotypes, mesenchymal stem cells and the interactions between them, some possible novel therapies for tendon-bone injury may be proposed to promote tendon-bone healing after restoration surgery.

Advanced strategies for constructing interfacial tissues of bone and tendon/ligament

Enthesis, the interfacial tissue between a tendon/ligament and bone, exhibits a complex histological transition from soft to hard tissue, which significantly complicates its repair and regeneration after injury. Because traditional surgical treatments for enthesis injury are not satisfactory, tissue engineering has emerged as a strategy for improving treatment success. Rapid advances in enthesis tissue engineering have led to the development of several strategies for promoting enthesis tissue regeneration, including biological scaffolds, cells, growth factors, and biophysical modulation. In this review, we discuss recent advances in enthesis tissue engineering, particularly the use of biological scaffolds, as well as perspectives on the future directions in enthesis tissue engineering.

Bioinspired Scaffold Designs for Regenerating Musculoskeletal Tissue Interfaces

The musculoskeletal system works at a very advanced level of synchrony, where all the physiological movements of the body are systematically performed through well-organized actions of bone in conjunction with all the other musculoskeletal soft tissues, such as ligaments, tendons, muscles, and cartilage through tissue-tissue interfaces. Interfaces are structurally and compositionally complex, consisting of gradients of extracellular matrix components, cell phenotypes as well as biochemical compositions and are important in mediating load transfer between the distinct orthopedic tissues during body movement. When an injury occurs at interface, it must be re-established to restore its function and stability. Due to the structural and compositional complexity found in interfaces, it is anticipated that they presuppose a concomitant increase in the complexity of the associated regenerative engineering approaches and scaffold designs to achieve successful interface regeneration and seamless integration of the engineered orthopedic tissues. Herein, we discuss the various bioinspired scaffold designs utilized to regenerate orthopedic tissue interfaces. First, we start with discussing the structure-function relationship at the interface. We then discuss the current understanding of the mechanism underlying interface regeneration, followed by discussing the current treatment available in the clinic to treat interface injuries. Lastly, we comprehensively discuss the state-of-the-art scaffold designs utilized to regenerate orthopedic tissue interfaces.

Cruciate ligament healing and injury prevention in the age of regenerative medicine and technostress: homeostasis revisited

PURPOSE

This clinical concepts paper discusses the essential elements of cruciate ligament recuperation, micro-trauma repair, and remodeling.

METHODS

Cruciate ligament mechanobiology and tissue heterogeneity, anatomy and vascularity, and synovial membrane and fluid functions are discussed in relationship to deficiency-induced inflammatory responses, nervous and immune system function, recuperation, repair and remodeling, and modern threats to homeostasis.

RESULTS

Cruciate ligament surgical procedures do not appreciate the vital linked functions of the central, peripheral, and autonomic nervous systems and immune system function on knee ligament injury recuperation, micro-trauma repair, and remodeling. Enhanced knowledge of these systems could provide innovative ways to decrease primary non-contact knee injury rates and improve outcomes following reconstruction or primary repair.

CONCLUSIONS

Restoration of knee joint homeostasis is essential to cruciate ligament recuperation, micro-trauma repair, and remodeling. The nervous and immune systems are intricately involved in this process. Varying combinations of high-intensity training, under-recovery, technostress, and environmental pollutants (including noise) regularly expose many athletically active individuals to factors that abrogate the environment needed for cruciate ligament recuperation, micro-trauma repair, and remodeling. Current sports training practice, lifestyle psychobehaviors, and environmental factors combine to increase both primary non-contact knee injury risk and the nervous and immune system dysregulation that lead to poor sleep, increased anxiety, and poorly regulated hormone and cytokine levels. These factors may create a worst-case scenario leading to poor ligament recuperation, micro-trauma repair, and remodeling. Early recognition and modification of these factors may decrease knee ligament injury rates and improve cruciate ligament repair or reconstruction outcomes.

LEVEL OF EVIDENCE

V.

Understanding the Stiff-to-Compliant Transition of the Meniscal Attachments by Spatial Correlation of Composition, Structure, and Mechanics

Recently, the scientific community has shown considerable interest in engineering tissues with organized compositional and structural gradients to mimic hard-to-soft tissue interfaces. This effort is hindered by an incomplete understanding of the construction of native tissue interfaces. In this work, we combined Raman microscopy and confocal elastography to map compositional, structural, and mechanical features across the stiff-to-compliant interface of the attachments of the meniscus in the knee. This study provides new insight into the methods by which biology mediates multiple orders of magnitude changes in stiffness over tens of microns. We identified how the nano- to mesoscale architecture mediates complex microscale transitional regions across the interface: two regions defined by chemical composition, five distinguished by structural features, and three mechanically distinct regions. We identified three major components that lead to a robust interface between a soft tissue and bone: mobile collagen fiber units, a continuous interfacial region, and a local stiffness gradient. This tissue architecture allows for large displacements of collagen fibers in the attachments, enabling meniscal movement without localizing strains to the soft tissue-to-bone interface. The interplay of these regions reveals a method relying on hierarchical structuring across multiple length scales to minimize stress concentrators between highly dissimilar materials. These insights inspire new design strategies for synthetic soft tissue-to-bone attachments and biomimetic material interfaces.

Nanofiber-based transforming growth factor-β3 release induces fibrochondrogenic differentiation of stem cells

Fibrocartilage is typically found in regions subject to complex, multi-axial loads and plays a critical role in musculoskeletal function. Mesenchymal stem cell (MSC)-mediated fibrocartilage regeneration may be guided by administration of appropriate chemical and/or physical cues, such as by culturing cells on polymer nanofibers in the presence of the chondrogenic growth factor TGF-β3. However, targeted delivery and maintenance of effective local factor concentrations remain challenges for implementation of growth factor-based regeneration strategies in clinical settings. Thus, the objective of this study was to develop and optimize the bioactivity of a biomimetic nanofiber scaffold system that enables localized delivery of TGF-β3. To this end, we fabricated TGF-β3-releasing nanofiber meshes that provide sustained growth factor delivery and demonstrated their potential for guiding synovium-derived stem cell (SDSC)-mediated fibrocartilage regeneration. TGF-β3 delivery enhanced cell proliferation and synthesis of relevant fibrocartilaginous matrix in a dose-dependent manner. By designing a scaffold that eliminates the need for exogenous or systemic growth factor administration and demonstrating that fibrochondrogenesis requires a lower growth factor dose compared to previously reported, this study represents a critical step towards developing a clinical solution for regeneration of fibrocartilaginous tissues. STATEMENT OF SIGNIFICANCE: Fibrocartilage is a tissue that plays a critical role throughout the musculoskeletal system. However, due to its limited self-healing capacity, there is a significant unmet clinical need for more effective approaches for fibrocartilage regeneration. We have developed a nanofiber-based scaffold that provides both the biomimetic physical cues, as well as localized delivery of the chemical factors needed to guide stem cell-mediated fibrocartilage formation. Specifically, methods for fabricating TGF-β3-releasing nanofibers were optimized, and scaffold-mediated TGF-β3 delivery enhanced cell proliferation and synthesis of fibrocartilaginous matrix, demonstrating for the first time, the potential for nanofiber-based TGF-β3 delivery to guide stem cell-mediated fibrocartilage regeneration. This nanoscale delivery platform represents an exciting new strategy for fibrocartilage regeneration.

Integrating soft and hard tissues via interface tissue engineering

The enthesis, or interface between bone and soft tissues such as ligament and tendon, is prone to injury and often does not heal, even post surgical intervention. Interface tissue engineering represents an integrative strategy for regenerating the native enthesis by functionally connecting soft and hard tissues and thereby improving clinical outcome. This review focuses on integrative and cell-instructive scaffold designs that target the healing of the two most commonly injured soft tissue-bone junctions: tendon-bone interface (e.g., rotator cuff) and ligament-bone interface (e.g., anterior cruciate ligament). The inherent connectivity between soft and hard tissues is instrumental for musculoskeletal motion and is therefore a key design criterion for soft tissue regeneration. To this end, scaffold design for soft tissue regeneration have progressed from single tissue systems to the emerging focus on pre-integrated and functional composite tissue units. Specifically, a multifaceted, bioinspired approach has been pursued wherein scaffolds are tailored to stimulate relevant cell responses using spatially patterned structural and chemical cues, growth factors, and/or mechanical stimulation. Moreover, current efforts to elucidate the essential scaffold design criteria via strategic biomimicry are emphasized as these will reduce complexity in composite tissue regeneration and ease the related burden for clinical translation. These innovative studies underscore the clinical relevance of engineering connective tissue integration and have broader impact in the formation of complex tissues and total joint regeneration. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1069-1077, 2018.

Compositional mapping of the mature anterior cruciate ligament-to-bone insertion

The anterior cruciate ligament (ACL)-to-bone interface constitutes a complex, multi-tissue structure comprised of contiguous ligament, non-mineralized fibrocartilage, mineralized fibrocartilage, and bone regions. This composite structure enables load transfer between structurally and functionally dissimilar tissues and is critical for ligament homeostasis and joint stability. Presently, there is a lack of quantitative understanding of the matrix composition and organization across this junction, especially after the onset of skeletal maturity. The objective of this study is to characterize the adult bovine ACL-to-bone interface using Fourier transform infrared spectroscopic imaging (FTIRI), testing the hypothesis that regional changes in collagen, proteoglycan, and mineral distribution, as well as matrix organization, persist at the mature insertion. It was observed that while collagen content increases continuously across the adult interface, collagen alignment decreases between ligament and bone. Proteoglycans were primarily localized to the fibrocartilage region and an exponential increase in mineral content was observed between the non-mineralized and mineralized regions. These observations reveal significant changes in collagen distribution and alignment with maturity, and these trends underscore the role of physiologic loading in postnatal matrix remodeling. Findings from this study provide new insights into interface organization and serve as benchmark design criteria for interface regeneration and integrative soft tissue repair. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2513-2523, 2017.

Micro- and Ultrastructural Characterization of Age-Related Changes at the Anterior Cruciate Ligament-to-Bone Insertion

There remains a lack of understanding of the structural changes that occur across the complex, multitissue anterior cruciate ligament (ACL)-to-bone insertion as a function of aging. The objective of this study is to provide a multiscale comparison of matrix properties across the skeletally immature and mature ACL-to-bone insertion. Using complementary imaging methods, micro- and ultrastructural analysis of the insertion revealed that collagen fiber orientation at the interface changes with age, though the degree of collagen organization is maintained over time. These changes are accompanied by a decrease in collagen fibril density and are likely driven by physiological loading. Mineral crystal structure and crystallinity are conserved over time, despite regional differences in crystallinity between the interface and bone. This suggests that mineral chemistry is established early in development and underscores its important functional role. Collectively, these findings provide new insights into interface development and set critical design benchmarks for integrative soft tissue repair.

Cellular interactions regulate stem cell differentiation in tri-culture

Currently, the mechanism governing the regeneration of the soft tissue-to-bone interface, such as the transition between the anterior cruciate ligament (ACL) and bone, is not known. Focusing on the ACL-to-bone insertion, this study tests the novel hypothesis that interactions between cells from the ligament (fibroblasts) and bone (osteoblasts) initiate interface regeneration. Specifically, these heterotypic cell interactions direct the fibrochondrogenic differentiation of interface-relevant cell populations, defined here as ligament fibroblasts and bone marrow stromal cells (BMSC). The objective of this study is to examine the effects of heterotypic cellular interactions on BMSC or fibroblast growth and biosynthesis, as well as expression of fibrocartilage-relevant markers in tri-culture. The effects of cell-cell physical contact and paracrine interactions between fibroblasts and osteoblasts were also determined. It was found that, in tri-culture with fibroblasts and osteoblasts, BMSC exhibited greater fibrochondrogenic potential than ligament fibroblasts. The growth of BMSC decreased while proteoglycan production and TGF-β3 expression increased. Moreover, tri-culture regulated BMSC response via paracrine factors, and interestingly, fibroblast-osteoblast contact further promoted proteoglycan and TGF-β1 synthesis as well as induced SOX9 expression in BMSC. Collectively, the findings of this study suggest that fibroblast-osteoblast interactions play an important role in regulating the stem cell niche for fibrocartilage regeneration, and the mechanisms of these interactions are directed by paracrine factors and augmented with direct cell-cell contact.

Biomimetic strategies for engineering composite tissues

The formation of multiple tissue types and their integration into composite tissue units presents a frontier challenge in regenerative engineering. Tissue-tissue synchrony is crucial in providing structural support for internal organs and enabling daily activities. This review highlights the state-of-the-art in composite tissue scaffold design, and explores how biomimicry can be strategically applied to avoid over-engineering the scaffold. Given the complexity of biological tissues, determining the most relevant parameters for recapitulating native structure-function relationships through strategic biomimicry will reduce the burden for clinical translation. It is anticipated that these exciting efforts in composite tissue engineering will enable integrative and functional repair of common soft tissue injuries and lay the foundation for total joint or limb regeneration.

Strategies to engineer tendon/ligament-to-bone interface: Biomaterials, cells and growth factors

Integration between tendon/ligament and bone occurs through a specialized tissue interface called enthesis. The complex and heterogeneous structure of the enthesis is essential to ensure smooth mechanical stress transfer between bone and soft tissues. Following injury, the interface is not regenerated, resulting in high rupture recurrence rates. Tissue engineering is a promising strategy for the regeneration of a functional enthesis. However, the complex structural and cellular composition of the native interface makes enthesis tissue engineering particularly challenging. Thus, it is likely that a combination of biomaterials and cells stimulated with appropriate biochemical and mechanical cues will be needed. The objective of this review is to describe the current state-of-the-art, challenges and future directions in the field of enthesis tissue engineering focusing on four key parameters: (1) scaffold and biomaterials, (2) cells, (3) growth factors and (4) mechanical stimuli.

Design and fabrication of biomimetic multiphased scaffolds for ligament-to-bone fixation

Conventional ligament grafts with single material composition cannot effectively integrate with the host bones due to mismatched properties and eventually affect their long-term function in vivo. Here we presented a multi-material strategy to design and fabricate composite scaffolds including ligament, interface and bone multiphased regions. The interface region consists of triphasic layers with varying material composition and porous structure to mimic native ligament-to-bone interface while the bone region contains polycaprolactone (PCL) anchor and microchanneled ceramic scaffolds to potentially provide combined mechanical and biological implant-bone fixation. Finite element analysis (FEA) demonstrated that the multiphased scaffolds with interference value smaller than 0.5 mm could avoid the fracture of ceramic scaffold during the implantation process, which was validated by in-vitro implanting the multiphased scaffolds into porcine joint bones. Pull-out experiment showed that the initial fixation between the multiphased scaffolds with 0.47 mm interference and the host bones could withstand the maximum force of 360.31±97.51 N, which can be improved by reinforcing the ceramic scaffolds with biopolymers. It is envisioned that the multiphased scaffold could potentially induce the regeneration of a new bone as well as interfacial tissue with the gradual degradation of the scaffold and subsequently realize long-term biological fixation of the implant with the host bone.

Hard-Soft Tissue Interface Engineering

The musculoskeletal system is comprised of three distinct tissue categories: structural mineralized tissues, actuating muscular soft tissues, and connective tissues. Where connective tissues - ligament, tendon and cartilage - meet with bones, a graded interface in mechanical properties occurs that allows the transmission of load without creating stress concentrations that would cause tissue damage. This interface typically occurs over less than 1 mm and contains a three order of magnitude difference in elastic stiffness, in addition to changes in cell type and growth factor concentrations among others. Like all engineered tissues, the replication of these interfaces requires the production of scaffolds that will provide chemical and mechanical cues, resulting in biologically accurate cellular differentiation. For interface tissues however, the scaffold must provide spatially graded chemical and mechanical cues over sub millimetre length scales. Naturally, this complicates the manufacture of the scaffolds and every stage of their subsequent cell seeding and growth, as each region has different optimal conditions. Given the higher degree of difficulty associated with replicating interface tissues compared to surrounding homogeneous tissues, it is likely that the development of complex musculoskeletal tissue systems will continue to be limited by the engineering of connective tissues interfaces with bone.

Engineering complex orthopaedic tissues via strategic biomimicry

The primary current challenge in regenerative engineering resides in the simultaneous formation of more than one type of tissue, as well as their functional assembly into complex tissues or organ systems. Tissue-tissue synchrony is especially important in the musculoskeletal system, wherein overall organ function is enabled by the seamless integration of bone with soft tissues such as ligament, tendon, or cartilage, as well as the integration of muscle with tendon. Therefore, in lieu of a traditional single-tissue system (e.g., bone, ligament), composite tissue scaffold designs for the regeneration of functional connective tissue units (e.g., bone-ligament-bone) are being actively investigated. Closely related is the effort to re-establish tissue-tissue interfaces, which is essential for joining these tissue building blocks and facilitating host integration. Much of the research at the forefront of the field has centered on bioinspired stratified or gradient scaffold designs which aim to recapitulate the structural and compositional inhomogeneity inherent across distinct tissue regions. As such, given the complexity of these musculoskeletal tissue units, the key question is how to identify the most relevant parameters for recapitulating the native structure-function relationships in the scaffold design. Therefore, the focus of this review, in addition to presenting the state-of-the-art in complex scaffold design, is to explore how strategic biomimicry can be applied in engineering tissue connectivity. The objective of strategic biomimicry is to avoid over-engineering by establishing what needs to be learned from nature and defining the essential matrix characteristics that must be reproduced in scaffold design. Application of this engineering strategy for the regeneration of the most common musculoskeletal tissue units (e.g., bone-ligament-bone, muscle-tendon-bone, cartilage-bone) will be discussed in this review. It is anticipated that these exciting efforts will enable integrative and functional repair of soft tissue injuries, and moreover, lay the foundation for the development of composite tissue systems and ultimately, total limb or joint regeneration.

Influence of tendon tears on ultrasound echo intensity in response to loading

Acoustoelastic (AE) ultrasound image analysis is a promising non-invasive approach that uses load-dependent echo intensity changes to characterize stiffness of tendinous tissue. The purpose of this study was to investigate whether AE can detect localized changes in tendon stiffness due to partial and full-thickness tendon tears. Ovine infraspinatus tendons with different levels of damage (Intact, 33%, 66% and full thickness cuts initiated on the articular and bursal sides) were cyclically loaded in a mechanical testing system while cine ultrasound images were recorded. The load-induced changes in echo intensity on the bursal and articular side of the tendon were determined. Consistent with AE theory, the undamaged tendons exhibited an increase in echo intensity with tendon loading, reflecting the strain-stiffening behavior of the tissue. In the intact condition, the articular region demonstrated a significantly greater increase in echo intensity during loading than the bursal region. Cuts initiated on the bursal side resulted in a progressive decrease in echo intensity of the adjacent tissue, likely reflecting the reduced load transmission through that region. However, image intensity information was less sensitive for identifying load transmission changes that result from partial thickness cuts initiated on the articular side. We conclude that AE approaches may be useful to quantitatively assess load-dependent changes in tendon stiffness, and that disruption of AE behavior may be indicative of substantial tendon damage.

Sonoelastography: musculoskeletal applications

All participants for image samplings provided written informed consent. Conventional B-mode ultrasonography (US) has been widely utilized for musculoskeletal problems as a first-line approach because of the advantages of real-time access and the relatively low cost. The biomechanical properties of soft tissues reflect to some degree the pathophysiology of the musculoskeletal disorder. Sonoelastography is an in situ method that can be used to assess the mechanical properties of soft tissue qualitatively and quantitatively through US imaging techniques. Sonoelastography has demonstrated feasibility in the diagnosis of cancers of the breast and liver, and in some preliminary work, in several musculoskeletal disorders. The main types of sonoelastography are compression elastography, shear-wave elastography, and transient elastography. In this article, the current knowledge of sonoelastographic techniques and their use in musculoskeletal imaging will be reviewed.

A multi-scale structural study of the porcine anterior cruciate ligament tibial enthesis

Like the human anterior cruciate ligament (ACL), the porcine ACL also has a double bundle structure and several biomechanical studies using this model have been carried out to show the differential effect of these two bundles on macro-level knee joint function. It is hypothesised that if the different bundles of the porcine ACL are mechanically distinct in function, then a multi-scale anatomical characterisation of their individual enthesis will also reveal significant differences in structure between the bundles. Twenty-two porcine knee joints were cleared of their musculature to expose the intact ACL following which ligament-bone samples were obtained. The samples were fixed in formalin followed by decalcification with formic acid. Thin sections containing the ligament insertion into the tibia were then obtained by cryosectioning and analysed using differential interference contrast (DIC) optical microscopy and scanning electron microscopy (SEM). At the micro-level, the anteromedial (AM) bundle insertion at the tibia displayed a significant deep-rooted interdigitation into bone, while for the posterolateral (PL) bundle the fibre insertions were less distributed and more focal. Three sub-types of enthesis were identified in the ACL and related to (i) bundle type, (ii) positional aspect within the insertion, and (iii) specific bundle function. At the nano-level the fibrils of the AM bundle were significantly larger than those in the PL bundle. The modes by which the AM and PL fibrils merged with the bone matrix fibrils were significantly different. A biomechanical interpretation of the data suggests that the porcine ACL enthesis is a specialized, functionally graded structural continuum, adapted at the micro-to-nano scales to serve joint function at the macro level.

Quantitative mapping of matrix content and distribution across the ligament-to-bone insertion

The interface between bone and connective tissues such as the Anterior Cruciate Ligament (ACL) constitutes a complex transition traversing multiple tissue regions, including non-calcified and calcified fibrocartilage, which integrates and enables load transfer between otherwise structurally and functionally distinct tissue types. The objective of this study was to investigate region-dependent changes in collagen, proteoglycan and mineral distribution, as well as collagen orientation, across the ligament-to-bone insertion site using Fourier transform infrared spectroscopic imaging (FTIR-I). Insertion site-related differences in matrix content were also evaluated by comparing tibial and femoral entheses. Both region- and site-related changes were observed. Collagen content was higher in the ligament and bone regions, while decreasing across the fibrocartilage interface. Moreover, interfacial collagen fibrils were aligned parallel to the ligament-bone interface near the ligament region, assuming a more random orientation through the bulk of the interface. Proteoglycan content was uniform on average across the insertion, while its distribution was relatively less variable at the tibial compared to the femoral insertion. Mineral was only detected in the calcified interface region, and its content increased exponentially across the mineralized fibrocartilage region toward bone. In addition to new insights into matrix composition and organization across the complex multi-tissue junction, findings from this study provide critical benchmarks for the regeneration of soft tissue-to-bone interfaces and integrative soft tissue repair.

Functional attachment of soft tissues to bone: development, healing, and tissue engineering

Connective tissues such as tendons or ligaments attach to bone across a multitissue interface with spatial gradients in composition, structure, and mechanical properties. These gradients minimize stress concentrations and mediate load transfer between the soft and hard tissues. Given the high incidence of tendon and ligament injuries and the lack of integrative solutions for their repair, interface regeneration remains a significant clinical challenge. This review begins with a description of the developmental processes and the resultant structure-function relationships that translate into the functional grading necessary for stress transfer between soft tissue and bone. It then discusses the interface healing response, with a focus on the influence of mechanical loading and the role of cell-cell interactions. The review continues with a description of current efforts in interface tissue engineering, highlighting key strategies for the regeneration of the soft tissue-to-bone interface, and concludes with a summary of challenges and future directions.

Detection of small tendon lesions by sonoelastographic visualization of strain profile differences: initial experiences

PURPOSE

To assess the capability of a commercial sonoelastography system to detect small tendon lesions by quantitative analysis of elastogram profiles.

MATERIALS AND METHODS

Strips of equine digital flexor tendons were used to model small human tendons. Two tendons were examined. From each tendon, six unmodified tendon strips (controls) and six tendon strips with a central defect of the same tendons were compared. The tendon strips were placed under a physiological tensile strain of 5%. Sonoelastographic visualization of the strain profile was performed. Regions of interest (ROI) were defined left and right of the tendon defects. Average tissue strains in these ROI were compared with tissue strain in controls.

RESULTS

In the first series of experiments, there was a significant (p = 0.011) difference in the strain profile in regions proximal and distal to the tendon lesions compared with the respective tendon areas in the control tendon strips. In a second series of experiments, similar trends were observed, but the differences were not significant (p = 0.824).

CONCLUSION

Even under carefully controlled experimental conditions using computational post-processing of sonoelastograms, tendon lesions could only be partially detected within elastograms from a clinical sonoelastography system. The ability to detect differences in some strain profiles indicates that tensile sonoelastography has the potential to identify small tendon lesions (such as those in the hand), but that substantial improvements with respect to quantitative analysis are required to make such measures diagnostically relevant.

Medical ultrasound: imaging of soft tissue strain and elasticity

After X-radiography, ultrasound is now the most common of all the medical imaging technologies. For millennia, manual palpation has been used to assist in diagnosis, but it is subjective and restricted to larger and more superficial structures. Following an introduction to the subject of elasticity, the elasticity of biological soft tissues is discussed and published data are presented. The basic physical principles of pulse-echo and Doppler ultrasonic techniques are explained. The history of ultrasonic imaging of soft tissue strain and elasticity is summarized, together with a brief critique of previously published reviews. The relevant techniques-low-frequency vibration, step, freehand and physiological displacement, and radiation force (displacement, impulse, shear wave and acoustic emission)-are described. Tissue-mimicking materials are indispensible for the assessment of these techniques and their characteristics are reported. Emerging clinical applications in breast disease, cardiology, dermatology, gastroenterology, gynaecology, minimally invasive surgery, musculoskeletal studies, radiotherapy, tissue engineering, urology and vascular disease are critically discussed. It is concluded that ultrasonic imaging of soft tissue strain and elasticity is now sufficiently well developed to have clinical utility. The potential for further research is examined and it is anticipated that the technology will become a powerful mainstream investigative tool.

Gradient biomaterials for soft-to-hard interface tissue engineering

Interface tissue engineering (ITE) is a rapidly developing field that aims to fabricate biological tissue alternates with the goal of repairing or regenerating the functions of diseased or damaged zones at the interface of different tissue types (also called "interface tissues"). Notable examples of the interface tissues in the human body include ligament-to-bone, tendon-to-bone and cartilage-to-bone. Engineering interface tissues is a complex process, which requires a combination of specialized biomaterials with spatially organized material composition, cell types and signaling molecules. Therefore, the use of conventional biomaterials (monophasic or composites) for ITE has certain limitations to help stimulate the tissue integration or recreating the structural organization at the junction of different tissue types. The advancement of micro- and nanotechnologies enable us to develop systems with gradients in biomaterials properties that encourage the differentiation of multiple cell phenotypes and subsequent tissue development. In this review we discuss recent developments in the fabrication of gradient biomaterials for controlling cellular behavior such as migration, differentiation and heterotypic interactions. Moreover, we give an overview of potential uses of gradient biomaterials in engineering interface tissues such as soft tissues (e.g. cartilage) to hard tissues (e.g. bone), with illustrated experimental examples. We also address fundamentals of interface tissue organization, various gradient biomaterials used in ITE, micro- and nanotechnologies employed for the fabrication of those gradients, and certain challenges that must be met in order for ITE to reach its full potential.

Finding consistent strain distributions in the glenohumeral capsule between two subjects: implications for development of physical examinations

The anterior-inferior glenohumeral capsule is the primary passive stabilizer to the glenohumeral joint during anterior dislocation. Physical examinations following dislocation are crucial for proper diagnosis of capsule pathology; however, they are not standardized for joint position which may lead to misdiagnoses and poor outcomes. To suggest joint positions for physical examinations where the stability provided by the capsule may be consistent among patients, the objective of this study was to evaluate the distribution of maximum principal strain on the anterior-inferior capsule using two validated subject-specific finite element models of the glenohumeral joint at clinically relevant joint positions. The joint positions with 25 N anterior load applied at 60° of glenohumeral abduction and 10°, 20°, 30° and 40° of external rotation resulted in distributions of strain that were similar between shoulders (r² ≥ 0.7). Furthermore, those positions with 20-40° of external rotation resulted in capsule strains on the glenoid side of the anterior band of the inferior glenohumeral ligament that were significantly greater than in all other capsule regions. These findings suggest that anterior stability provided by the anterior-inferior capsule may be consistent among subjects at joint positions with 60° of glenohumeral abduction and a mid-range (20-40°) of external rotation, and that the glenoid side has the greatest contribution to stability at these joint positions. Therefore, it may be possible to establish standard joint positions for physical examinations that clinicians can use to effectively diagnose pathology in the anterior-inferior capsule following dislocation and lead to improved outcomes.

The Impact of Glenoid Labrum Thickness and Modulus on Labrum and Glenohumeral Capsule Function

The glenoid labrum is an integral component of the glenohumeral capsule’s insertion into the glenoid, and changes in labrum geometry and mechanical properties may lead to the development of glenohumeral joint pathology. The objective of this research was to determine the effect that changes in labrum thickness and modulus have on strains in the labrum and glenohumeral capsule during a simulated physical examination for anterior instability. A labrum was incorporated into a validated, subject-specific finite element model of the glenohumeral joint, and experimental kinematics were applied simulating application of an anterior load at 0 deg, 30 deg, and 60 deg of external rotation and 60 deg of glenohumeral abduction. The radial thickness of the labrum was varied to simulate thinning tissue, and the tensile modulus of the labrum was varied to simulate degenerating tissue. At 60 deg of external rotation, a thinning labrum increased the average and peak strains in the labrum, particularly in the labrum regions of the axillary pouch (increased 10.5% average strain) and anterior band (increased 7.5% average strain). These results suggest a cause-and-effect relationship between age-related decreases in labrum thickness and increases in labrum pathology. A degenerating labrum also increased the average and peak strains in the labrum, particularly in the labrum regions of the axillary pouch (increased 15.5% strain) and anterior band (increased 10.4% strain). This supports the concept that age-related labrum pathology may result from tissue degeneration. This work suggests that a shift in capsule reparative techniques may be needed in order to include the labrum, especially as activity levels in the aging population continue to increase. In the future validated, finite element models of the glenohumeral joint can be used to explore the efficacy of new repair techniques for glenoid labrum pathology.

Tissue engineering strategies for the regeneration of orthopedic interfaces

A major focus in the field of orthopedic tissue engineering is the development of tissue engineered bone and soft tissue grafts with biomimetic functionality to allow for their translation to the clinical setting. One of the most significant challenges of this endeavor is promoting the biological fixation of these grafts with each other as well as the implant site. Such fixation requires strategic biomimicry to be incorporated into the scaffold design in order to re-establish the critical structure-function relationship of the native soft tissue-to-bone interface. The integration of distinct tissue types (e.g. bone and soft tissues such as cartilage, ligaments, or tendons), necessitates a multi-phased or stratified scaffold with distinct yet continuous tissue regions accompanied by a gradient of mechanical properties. This review discusses tissue engineering strategies for regenerating common tissue-to-tissue interfaces (ligament-to-bone, tendon-to-bone, or cartilage-to-bone), and the strategic biomimicry implemented in stratified scaffold design for multi-tissue regeneration. Potential challenges and future directions in this emerging field will also be presented. It is anticipated that interface tissue engineering will enable integrative soft tissue repair, and will be instrumental for the development of complex musculoskeletal tissue systems with biomimetic complexity and functionality.

Endosonographic elastography of the anal sphincter in patients with fecal incontinence

OBJECTIVE

In fecal incontinence the role of elastography has not yet been evaluated. We performed a trial to further characterize the internal and external anal sphincter in patients with fecal incontinence and compared a visual assessment scale with a computerized program for quantifying elastic properties of the anal sphincter.

MATERIAL AND METHODS

Fifty consecutive patients with fecal incontinence were studied (n = 31 following lower anterior resection, n = 8 with Crohn's disease, n = 9 following colon surgery, n = 2 others). Elastogram color distribution within the sphincter representing elastic properties was quantified using a visual analog scale and an off-line computerized area calculation program.

RESULTS

The main finding was that the inner anal sphincter (IAS) differed significantly from the external anal sphincter (EAS) with regard to elastogram color distribution. There were no significant correlations with clinical and functional parameters. There was, however, a non-significant increase in the percentage of blue (hard) areas in the IAS in patients neoadjuvantly irradiated for rectal or cervical cancer compared to non-irradiated patients, which was accompanied by a significant decrease in the resting sphincter pressure (p < 0.009).

CONCLUSIONS

The IAS, a smooth muscle, and the EAS, a striated muscle, have different elastogram color distributions, probably reflecting their different elastic properties. The absence of significant correlations with the major clinical and functional parameters suggests that in routine clinical practice ultrasound real-time elastography may not yield additional information in patients with fecal incontinence. There may be exceptions, particularly in irradiated patients.

Nanoindentation of the insertional zones of human meniscal attachments into underlying bone

The fibrocartilagenous knee menisci are situated between the femoral condyles and tibia plateau and are primarily anchored to the tibia by means of four attachments at the anterior and posterior horns. Strong fixation of meniscal attachments to the tibial plateau provide resistance to extruding forces of the meniscal body, allowing the menisci to assist in load transmission from the femur to the tibia. Clinically, tears and ruptures of the meniscal attachments and insertion to bone are rare. While it has been suggested that the success of a meniscal replacement is dependent on several factors, one of which is the secure fixation and firm attachment of the replacement to the tibial plateau, little is known about the material properties of meniscal attachments and the transition in material properties from the meniscus to subchondral bone. The objective of this study was to use nanoindentation to investigate the transition from meniscal attachment into underlying subchondral bone through uncalcified and calcified fibrocartilage. Nanoindentation tests were performed on both the anterior and posterior meniscal insertions to measure the instantaneous elastic modulus and elastic modulus at infinite time. The elastic moduli were found to increase in a bi-linear fashion from the external ligamentous attachment to the subchondral bone. The elastic moduli for the anterior attachments were consistently larger than those for the matching posterior attachments at similar indentation locations. These results show that there is a gradient of stiffness from the superficial zones of the insertion close to the ligamentous attachment into the deeper zones of the bone. This information will be useful in the continued development of successful meniscal replacements and understanding of fixation of the replacements to the tibial plateau.

Orthopedic interface tissue engineering for the biological fixation of soft tissue grafts

Interface tissue engineering is a promising new strategy aimed at the regeneration of tissue interfaces and ultimately enabling the biological fixation of soft tissue grafts used in orthopedic repair and sports medicine. Many ligaments and tendons with direct insertions into subchondral bone exhibit a complex enthesis consisting of several distinct yet continuous regions of soft tissue, noncalcified fibrocartilage, calcified fibrocartilage, and bone. Regeneration of this multi-tissue interface will be critical for functional graft integration and improving long-term clinical outcome. This review highlights current knowledge of the structure-function relationship at the interface, the mechanism of interface regeneration, and the strategic biomimicry implemented in stratified scaffold design for interface tissue engineering and multi-tissue regeneration. Potential challenges and future directions in this emerging field are also discussed. It is anticipated that interface tissue engineering will lead to the design of a new generation of integrative fixation devices for soft tissue repair, and it will be instrumental for the development of integrated musculoskeletal tissue systems with biomimetic complexity and functionality.

Twenty-five years of tendon and ligament research

Twenty-five years ago, the Journal of Orthopaedic Research published its first volume, which included five articles covering topics in tendon and ligament research. Since then, the body of tendon and ligament research has continued to increase exponentially. This review summarizes major advancements in tendon and ligament research since the initial publication of this journal. The purpose of this article is not to provide an in-depth review of all of tendon and ligament research, but instead to provide a concise literature review of some of the major and recurring areas of research. The general topics covered over the last 25 years include tissue properties, tendinopathy, healing, and engineered scaffolds.

In vivo evaluation of a multiphased scaffold designed for orthopaedic interface tissue engineering and soft tissue-to-bone integration

Achieving functional graft integration with subchondral bone poses a significant challenge for orthopaedic soft tissue repair and reconstruction. Soft tissues such as the anterior cruciate ligament (ACL) integrate with bone through a fibrocartilage interface, which minimizes stress concentrations and mediates load transfer between soft and hard tissues. We propose that biological fixation can be achieved by regenerating this fibrocartilage interface on biological or synthetic ACL grafts. This study focuses on the in vivo evaluation of a stratified scaffold predesigned to mimic the multitissue transition found at the ACL-to-bone interface. Specifically, the scaffold consists of three distinct yet continuous phases: Phase A for ligament formation, Phase B for the interface, and Phase C for the bone region. Interface-relevant cell types, specifically fibroblasts, chondrocytes, and osteoblasts, will be tri-cultured on this scaffold, and the formation of cell type- and phase-specific matrix heterogeneity as well as fibrocartilage formation will be evaluated over 8 weeks in a subcutaneous athymic rat model. Acellular scaffolds as well as scaffolds co-cultured with fibroblasts and osteoblasts will serve as controls. It was found that the triphasic scaffold supported multilineage cellular interactions as well as tissue infiltration and abundant matrix production in vivo. In addition, controlled phase-specific matrix heterogeneity was induced on the scaffold, with distinct mineral and fibrocartilage-like tissue regions formed in the tri-cultured group. Cell seeding had a positive effect on both host infiltration and matrix elaboration, which also translated into increased mechanical properties in the seeded groups compared to the acellular controls. In summary, the biomimetic and multiphasic design coupled with spatial control of cell distribution enables multitissue regeneration on the stratified scaffold, and demonstrates the potential for regenerating the interface between soft tissue grafts and bone.

Mechanoactive scaffold induces tendon remodeling and expression of fibrocartilage markers

Biological fixation of soft tissue-based grafts for anterior cruciate ligament (ACL) reconstruction poses a major clinical challenge. The ACL integrates with subchondral bone through a fibrocartilage enthesis, which serves to minimize stress concentrations and enables load transfer between two distinct tissue types. Functional integration thus requires the reestablishment of this fibrocartilage interface on reconstructed ACL grafts. We designed and characterized a novel mechanoactive scaffold based on a composite of poly-alpha-hydroxyester nanofibers and sintered microspheres; we then used the scaffold to test the hypothesis that scaffold-induced compression of tendon grafts would result in matrix remodeling and the expression of fibrocartilage interface-related markers. Histology coupled with confocal microscopy and biochemical assays were used to evaluate the effects of scaffold-induced compression on tendon matrix collagen distribution, cellularity, proteoglycan content, and gene expression over a 2-week period. Scaffold contraction resulted in over 15% compression of the patellar tendon graft and upregulated the expression of fibrocartilage-related markers such as Type II collagen, aggrecan, and transforming growth factor-beta3 (TGF-beta3). Additionally, proteoglycan content was higher in the compressed tendon group after 1 day. The data suggest the potential of a mechanoactive scaffold to promote the formation of an anatomic fibrocartilage enthesis on tendon-based ACL reconstruction grafts.

Characterization of the structure-function relationship at the ligament-to-bone interface

Soft tissues such as ligaments and tendons integrate with bone through a fibrocartilaginous interface divided into noncalcified and calcified regions. This junction between distinct tissue types is frequently injured and not reestablished after surgical repair. Its regeneration is also limited by a lack of understanding of the structure-function relationship inherent at this complex interface. Therefore, focusing on the insertion site between the anterior cruciate ligament (ACL) and bone, the objectives of this study are: (i) to determine interface compressive mechanical properties, (ii) to characterize interface mineral presence and distribution, and (iii) to evaluate insertion site-dependent changes in mechanical properties and matrix mineral content. Interface mechanical properties were determined by coupling microcompression with optimized digital image correlation analysis, whereas mineral presence and distribution were characterized by energy dispersive x-ray analysis and backscattered scanning electron microscopy. Both region- and insertion-dependent changes in mechanical properties were found, with the calcified interface region exhibiting significantly greater compressive mechanical properties than the noncalcified region. Mineral presence was only detectable within the calcified interface and bone regions, and its distribution corresponds to region-dependent mechanical inhomogeneity. Additionally, the compressive mechanical properties of the tibial insertion were greater than those of the femoral. The interface structure-function relationship elucidated in this study provides critical insight for interface regeneration and the formation of complex tissue systems.

Autologous stem cell regeneration in craniosynostosis

Craniosynostosis occurs in one of 2500 live human births and may manifest as craniofacial disfiguration, seizure, and blindness. Craniotomy is performed to reshape skull bones and resect synostosed cranial sutures. We demonstrate for the first time that autologous mesenchymal stem cells (MSCs) and controlled-released TGFbeta3 reduced surgical trauma to localized osteotomy and minimized osteogenesis in a rat craniosynostosis model. Approximately 0.5 mL tibial marrow content was aspirated to isolate mononucleated and adherent cells that were characterized as MSCs. Upon resecting the synostosed suture, autologous MSCs in collagen carriers with microencapsulated TGFbeta3 (1 ng/mL) generated cranial suture analogs characterized as bone-soft tissue-bone interface by quantitative histomorphometric and microCT analyses. Thus, surgical trauma in craniosynostosis can be minimized by a biologically viable implant. We speculate that proportionally larger amounts of human marrow aspirates participate in the healing of craniosynostosis defects in patients. The engineered soft tissue-bone interface may have implications in the repair of tendons, ligaments, periosteum and periodontal ligament.

Small oscillatory accelerations, independent of matrix deformations, increase osteoblast activity and enhance bone morphology

A range of tissues have the capacity to adapt to mechanical challenges, an attribute presumed to be regulated through deformation of the cell and/or surrounding matrix. In contrast, it is shown here that extremely small oscillatory accelerations, applied as unconstrained motion and inducing negligible deformation, serve as an anabolic stimulus to osteoblasts in vivo. Habitual background loading was removed from the tibiae of 18 female adult mice by hindlimb-unloading. For 20 min/d, 5 d/wk, the left tibia of each mouse was subjected to oscillatory 0.6 g accelerations at 45 Hz while the right tibia served as control. Sham-loaded (n = 9) and normal age-matched control (n = 18) mice provided additional comparisons. Oscillatory accelerations, applied in the absence of weight bearing, resulted in 70% greater bone formation rates in the trabeculae of the metaphysis, but similar levels of bone resorption, when compared to contralateral controls. Quantity and quality of trabecular bone also improved as a result of the acceleration stimulus, as evidenced by a significantly greater bone volume fraction (17%) and connectivity density (33%), and significantly smaller trabecular spacing (-6%) and structural model index (-11%). These in vivo data indicate that mechanosensory elements of resident bone cell populations can perceive and respond to acceleratory signals, and point to an efficient means of introducing intense physical signals into a biologic system without putting the matrix at risk of overloading. In retrospect, acceleration, as opposed to direct mechanical distortion, represents a more generic and safe, and perhaps more fundamental means of transducing physical challenges to the cells and tissues of an organism.

Engineering complex tissues

This article summarizes the views expressed at the third session of the workshop "Tissue Engineering--The Next Generation," which was devoted to the engineering of complex tissue structures. Antonios Mikos described the engineering of complex oral and craniofacial tissues as a "guided interplay" between biomaterial scaffolds, growth factors, and local cell populations toward the restoration of the original architecture and function of complex tissues. Susan Herring, reviewing osteogenesis and vasculogenesis, explained that the vascular arrangement precedes and dictates the architecture of the new bone, and proposed that engineering of osseous tissues might benefit from preconstruction of an appropriate vasculature. Jennifer Elisseeff explored the formation of complex tissue structures based on the example of stratified cartilage engineered using stem cells and hydrogels. Helen Lu discussed engineering of tissue interfaces, a problem critical for biological fixation of tendons and ligaments, and the development of a new generation of fixation devices. Rita Kandel discussed the challenges related to the re-creation of the cartilage-bone interface, in the context of tissue engineered joint repair. Frederick Schoen emphasized, in the context of heart valve engineering, the need for including the requirements derived from "adult biology" of tissue remodeling and establishing reliable early predictors of success or failure of tissue engineered implants. Mehmet Toner presented a review of biopreservation techniques and stressed that a new breakthrough in this field may be necessary to meet all the needs of tissue engineering. David Mooney described systems providing temporal and spatial regulation of growth factor availability, which may find utility in virtually all tissue engineering and regeneration applications, including directed in vitro and in vivo vascularization of tissues. Anthony Atala offered a clinician's perspective for functional tissue regeneration, and discussed new biomaterials that can be used to develop new regenerative technologies.

Characterization of the mechanical properties and mineral distribution of the anterior cruciate ligament-to-bone insertion site

The anterior cruciate ligament (ACL) connects the femur to the tibia through direct insertion sites and functions as the primary restraint to anterior tibial translation. The ACL-to-bone insertion sites exhibit a complex structure consisting of four zones of varied cellular and matrix components, consisting of ligament, non-mineralized fibrocartilage, mineralized fibrocartilage and bone, which allow for the effective load transfer from ligament to bone, thereby minimizing stress concentrations and preventing failure. The mineral content and distribution within the fibrocartilage region may be an important structural component of the insertion site which may influence the mechanical properties. The goals of this study are to characterize the compressive mechanical properties of the fibrocartilage region of the ACL-to-bone insertion site and evaluate how the mineral distribution at the interface relates to these compressive properties. In order to determine the compressive mechanical properties we have utilized a novel microscopic mechanical testing method combined with digital image correlation and employed energy dispersive X-ray analysis (EDAX) in order to evaluate the mineral content and distribution across the femoral and tibial insertion sites. The results reveal that a regional mineral gradient is observed across the fibrocartilage which corresponds to depth-dependent variations in compressive mechanical properties. This depth- dependent mechanical inhomogeneity strongly correlates to the increase in mineral content of the mineralized fibrocartilage (MFC) region compared to the non-mineralized fibrocartilage (NFC). Additionally, the tibial NFC and MFC mechanical properties are greater than those of the femoral NFC and MFC which corresponds to a greater mineral content in the NFC and MFC regions of the tibial insertion. The findings of this study suggest that a structure-function relationship exists at the ACL-to-bone interface.